RMP.1:5 - Archetypal Grounding
These constructed cases use stipulated facts to illustrate how the research boundary changes with the question. Empirical claims about a pump, stream, archive, instrument or authority require evidence from the corresponding case.
RMP.1:5.1 - Corporate Seal-Test Case
A reliability engineer is asked whether an accelerated seal test justifies changing the maintenance interval for Pump-P4. In this case, designated authorities hold responsibility for maintenance, safety and engineering qualification. The inquiry concerns what the test establishes.
First check the current engineering account. If it supplies the field failure mechanism, applicable acceleration relation, qualified test method and instrument, acceptance criteria and evidence-to-use rule, the test can give an ordinary qualification or validation result. Give that result to its engineering or assurance user. The maintenance authority decides on the interval. A laboratory setting or possible publication changes neither question.
Suppose instead that high temperature may change the dominant degradation mechanism and that installation damage and fluid exposure are serious field alternatives. If these premises and the remaining membership conditions hold, the ResearchQuestionBrief can take the following form.
| Position | Constructed result |
|---|---|
| receiver and use | Reliability council needs evidence about whether the accelerated-test result can bear on the current seal-life claim. The maintenance authority retains the interval decision. |
| intended episteme change | Retain, narrow, or reject the claim that degradation observed under the selected accelerated condition is evidentially relevant to Pump-P4 field failure within the named operating envelope. |
| bounded question | Within the named Pump-P4 material, fluid, pressure, and temperature envelope, does the selected acceleration condition preserve the field failure-mechanism relation well enough for its degradation evidence to bear on the current seal-life claim? |
| current frame and rivals | Current sources support the field claim only provisionally. Acceleration-induced mechanism change, installation damage, batch/material variation, and field fluid exposure remain serious alternatives. |
| membership account | The mechanism relation is unresolved for this use and the inquiry must examine how evidence bears on it. Specimens, conditions, measurements, deviations and limits can be traced and criticized. The intended result is a bounded claim about the mechanism and its evidence. |
| criticism demand | The evidence must be able to reveal a mechanism change caused by acceleration and distinguish it from the named field alternatives. A design choice, if needed, concerns how to do so. |
| constraints and returns | Use qualified engineering results for admissible indicators and specimen identity, and suitable evidence for instrument feasibility and calibration. Observe the safety and access conditions set by their authorities. Identify a missing result and its supplier if the design depends on it. |
| answer condition | Establish whether the selected acceleration condition preserves the mechanism relation needed for the bounded seal-life claim. Qualified evidence can support, narrow or reject that relation; identifying a still-missing decisive result leaves it unresolved. |
| work-stop and reopen conditions | Finish with the supported answer or return the unresolved relation and its decisive missing result. RMP.2 distinguishes a still-needed selection from a completed allocation with no new study. A newly available result or worthwhile obtainable comparison can reopen that choice. The maintenance authority retains the interval decision. |
Use the brief and frame in RMP.2 if a choice of design is still needed. If existing evidence establishes that the acceleration relation is invalid for the proposed use, give that finding and its scope. It can settle the question directly.
RMP.1:5.2 - Citizen Stream-Salinity Transfer
Residents observe an increase in urban-stream salinity. If the task is to report current state under established sampling, threshold and response rules, use or supply the monitoring result. Repeated sampling and a public dashboard can serve that ordinary task.
Suppose instead that sensor drift, road-salt transport, groundwater contribution, a changed outfall and seasonal hydrology remain plausible explanations for a particular reach and period. The community wants an explanation. The question can satisfy all four conditions if the research must examine those unsettled alternatives, its sources and measurements are inspectable, and the team can return a bounded finding with its limits. A justified existing protocol may supply some of the operations.
The brief identifies the reach and period, observations and contrasts, relevant sources and dates, rival explanations, required criticism, sampling and access conditions, useful stop and intended user. Qualified measurement, site access, privacy, safety and official response each need their own basis. Membership depends on the inquiry. If the sensor is invalid, identify which claim loses its support. A qualified alternative measurement may be enough. If measurement repair or ordinary monitoring is needed, use that route and preserve any other supported finding.
RMP.1:5.3 - Historical Source-Critical Contrast
An archive group asks whether a change in maintenance followed one directive or appeared earlier in workshop records. Rival chronologies, source provenance and silences can call for genuine inquiry. If the four conditions hold, its result is a bounded historical claim. One authenticated dated record may already answer a narrower date question directly. Apply the relevant access, conservation, rights and interpretation conditions.
RMP.1:5.4 - Retrieval-Sufficient Stop
A product team asks whether the current standard still permits configuration X. The applicable edition and clause, their local meaning, jurisdiction and effective dates answer the question. Give the answer and its source conditions in the current exchange. The card finishes at prompt 3.
Another team proposes the same configuration in a different jurisdiction. The retained edition, clause and jurisdiction identify where the earlier answer applies. Use a competent existing result for the new jurisdiction or state the remaining gap. If the empirical adequacy of the clause in a materially new setting becomes a question, qualify that question and its current frame separately.
RMP.1:5.5 - Recover an Answer from the Texts
A product team asks to research whether instruction M still permits configuration X on housing V2. It has a 2021 instruction, the 2025 revision and a 2025 correction notice. All are stipulated source texts for this constructed case.
Searching the old instruction for “permitted configurations” returns X for V1. The new contents instead use “installation combinations”; its table lists X with V2. The adjacent note limits that row to dry service. The correction notice changes a different combination. Reading the table and its note changes the answer from “only V1” to “the 2025 instruction includes X with V2 for dry service.” The answer identifies the edition, table and note. No experiment is needed to establish what that instruction says.
The team clarifies that the intended service is wet. Retain the established answer for dry service. An applicable instruction or qualified engineering judgment could supply the wet-service answer. If the team asks whether the instruction’s claim holds in a materially new setting, qualify the empirical question under the four conditions before choosing a study.
RMP.1:5.6 - Compare the Answers that Existing Reports Can Supply
In the seal case from §5.1, a report supports a temperature-acceleration relation for a stated material in water. A later report concerns another fluid and a different dominant degradation mechanism. Both can inform the question. Comparing their conclusions requires keeping the material, fluid and mechanism in scope. Publication date or test duration alone cannot rank them.
Retain the supported water relation and the evidence of a different mechanism in the other fluid. The useful question becomes whether the proposed test preserves the field mechanism for this material and fluid. An applicable existing study may answer it. If a mechanism question remains, apply the membership test with the criticism it requires. Undertaking a new study needs a justified design decision.
RMP.1:5.7 - One Supplied Protocol, Two Different Epistemic Tasks
Consider a two-condition assay of polymer stiffness after dry or humid storage. The case supplies and justifies the materials, allocation, conditioning, instrument, sample rationale, analysis and interpretation for the uses described. Competence, access, protection and resources are available. The procedure stays the same as the question and intended contribution change.
Replication of a disputed claim. Existing evidence disagrees about whether humidity changes the stiffness of a particular material under stated conditions. A new independent sample could change the support for that claim. The justified protocol specifies the comparison, treatment of uncertainty and what counts as a compatible, discrepant or inconclusive result. The inquiry meets the four conditions through its open knowledge question, examination of a disputed relation, inspectable evidence and bounded result. Its brief gives the claim, current knowledge, criticism requirement, proposed new-data contribution and limits. Use the design already selected. RMP.6 can help decide whether to obtain the replication at its full cost. Membership alone leaves that choice open. An inconclusive result can leave the relation disputed, and a discrepancy reopens the interpretations that depend on it.
Routine quality control. A production laboratory uses the same assay under an accepted material specification and acceptance rule. The question is whether this lot passes. Obtaining a new value supplies an ordinary case verdict while the humidity–stiffness relation stays an accepted premise. The trace and certificate can support that quality-assurance result. Production retains the release decision. For an out-of-range result, use the qualified investigation or recovery procedure. Revisit the need for research if a distinct claim about the relation, measure or applicability becomes unsettled.
A trainee may also run the assay to learn the procedure. Personal unfamiliarity can identify a learning need while the scientific relation is already established. Identify which result the work must supply in each case and preserve evidence for that contribution.
RMP.1:5.8 - An observation before a research question
An archive team sees district totals of 40 in one year and 80 in another. The headings and instructions show that the earlier table counts operating machines and the later one counts permits issued. A permit may precede installation or remain unused. The figures establish two counts with different meanings. Whether operating machines doubled remains open.
Reading the construction of the counts gave the team the distinction it needed. It can return that corrected interpretation directly. To investigate change in the number of operating machines, compare evidence of actual operation in the two periods. To explain a discrepancy between operating counts and permits, also establish how the two series relate. Check what existing records establish. If operating records are inaccessible and the necessary fact remains unknown, preserve the documentary correction and state the historical limit. Apply the four research conditions if a further inquiry needs qualification.