Softbox diy

How to Make a Softbox for Under 10$ DIY: Professional Softboxes can cost over 200$! We decided to build our own for less than 10$. it is very simple to make. This Softbox can be used a a photo, video and a normal light. Pictures and videos look more professional if you use a Softbox!

Posts about DIY camera equipmeny written by macrocritters

Last week I posted a DIY article on building a DIY Spiderlight. If you haven't seen it here it is: I finally had some time to complete the softbox that was meant to go along this light fixture. Here's what it looks like (without the diffuser panel): I am so happy. The whole thing is very lightweight and also really strong. It also costs a fraction of a real softbox. Be advised though, this won't be done in an hour. It took me several hours to build it, and it is mostly because of the curved…

Draw the four sides. This won't work on every cereal box, I guess, though you could try. I used an oversized, reinforced Cinammon Toast Crunch box from Sam's Club. (The measurements will depend on the size of the flash head.) With materials found at home (no cost), I made a mini-softbox for my flash photography.

Flickr is nothing without you, our community. We want to make sure this community continues to thrive, grow, and inspire, so we've made some big changes.

New Flickr Profile Found At www.flickr.com/davegruentzel for the light i used some 250w work lights that i found on sale for $4 each, killer deal. but be careful, they do get hot. the box was made out of two sheets of white 20inx30in foam core, about $3 per sheet. if i was to do it again i would use foam core that has white on one side and black on the other so i dont have to use the black duck tape. the stand is PVC and is adjustable in hight, about $6 for all of the PVC. i used 3/4" and 1"…

The world's most popular free resource for learning how to use off-camera flash.