This firmware is a fork from flipperdevices/flipperzero-firmware

Our goal is to make any features possible in this device without any limitations!

Please help us implement emulation for all subghz dynamic (rolling code) protocols!

• SubGHz regional TX restrictions removed
• SubGHz frequency range can be extended in settings file (Warning: It can damage flipper's hardware)
• Many rolling code protocols now have the ability to save & send captured signals
• FAAC SLH (Spa) & BFT Mitto (secure with seed) manual creation
• Sub-GHz static code brute-force plugin
• LFRFID Fuzzer plugin
• Custom community plugins and games added
• Extra SubGHz frequencies + extra Mifare Classic keys
• Picopass/iClass plugin included in releases
• Recompiled IR TV Universal Remote for ALL buttons
• Universal remote for Projectors, Fans, A/Cs and Audio(soundbars, etc.)
• BadUSB keyboard layouts
• Customizable Flipper name
• SubGHz -> Press OK in frequency analyzer to use detected frequency in Read modes
• SubGHz -> Long press OK button in SubGHz Frequency analyzer to switch to Read menu
• Other small fixes and changes throughout
• See other changes in changelog and in readme below

Also check changelog in releases for latest updates!

• Keeloq [Not ALL systems supported for decode or emulation yet!] - Supported manufacturers list
• Keeloq: HCS101
• Keeloq: AN-Motors
• Keeloq: JCM Tech
• Keeloq: MHouse
• Keeloq: Nice Smilo
• Keeloq: DTM Neo
• Keeloq: FAAC RC,XT
• Keeloq: Mutancode
• Keeloq: Normstahl
• CAME Atomo
• Nice Flor S
• FAAC SLH (Spa) [External seed calculation required (For info contact me in Discord: Nano#8998)]
• BFT Mitto [External seed calculation required (For info contact me in Discord: Nano#8998)]
• Security+ v1 & v2
• Star Line

• Boosty: https://boosty.to/mmxdev
• destream (100 EUR min): https://destream.net/live/MMX/donate
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn

• RFID Fuzzer plugin (by Ganapati & @xMasterX) & New protocols by @mvanzanten
• Sub-GHz bruteforce plugin (by @derskythe & xMasterX) (original by Ganapati)
• Sub-GHz playlist plugin (by darmiel)
• ESP8266 Deauther plugin (by SequoiaSan)
• WiFi Scanner plugin (by SequoiaSan)
• MultiConverter plugin (by theisolinearchip)
• USB Keyboard plugin (by huuck)
• WAV player plugin (fixed) (OFW: DrZlo13)
• Barcode generator plugin (original by McAzzaMan) - EAN-8 and refactoring by @msvsergey
• GPIO: Sentry Safe plugin (by H4ckd4ddy)
• ESP32: WiFi Marauder companion plugin (by 0xchocolate)
• NRF24: Sniffer & MouseJacker (with changes) (by mothball187)
• Simple Clock (timer by GMMan / settings by kowalski7cc) (original by CompaqDisc)
• UniversalRF Remix / Sub-GHz Remote (by @darmiel & @xMasterX) (original by @ESurge)
• Spectrum Analyzer (with changes) (by jolcese) - Ultra Narrow mode & scan channels non-consecutively
• Metronome (by panki27)
• DTMF Dolphin (by litui)
• TOTP (Authenticator) (by akopachov)
• GPS (by ezod) works with module NMEA 0183 via UART (13TX, 14RX, GND pins on Flipper)
• i2c Tools (by NaejEL) - C0 -> SCL / C1 -> SDA / GND -> GND | 3v3 logic levels only!
• Temperature Sensor Plugin - HTU2xD, SHT2x, SI702x, SI700x, SI701x, AM2320 (by Mywk) - How to Connect
• HC-SR04 Distance sensor - Ported and modified by @xMasterX (original by Sanqui) - How to connect -> (5V -> VCC) / (GND -> GND) / (13|TX -> Trig) / (14|RX -> Echo)
• Morse Code (by wh00hw)
• AM2320/AM2321 Temp. Sensor plugin (by xMasterX) - How to Connect
• DHT11/22 Temp. Sensor Monitor (by quen0n) - How to connect -> (5V -> VCC) / (GND -> GND) / (Selected Pin -> out)
• BH1750 - Lightmeter (by oleksiikutuzov)
• iButton Fuzzer (by xMasterX)
• HEX Viewer (by QtRoS)

Games:

• DOOM (fixed) (by p4nic4ttack)
• Zombiez (Reworked By DevMilanIan) (Original By Dooskington)
• Flappy Bird (by DroomOne)
• Arkanoid (refactored by xMasterX) (by gotnull)
• Tic Tac Toe (refactored by xMasterX) (by gotnull)
• Tetris (with fixes) (by jeffplang)
• Minesweeper (by panki27)
• Heap Defence (aka Stack Attack) - Ported to latest firmware by @xMasterX - (original by wquinoa & Vedmein)
• Game15 (by x27)
• Solitaire (by teeebor)
• BlackJack (by teeebor)

• BadUSB -> Keyboard layouts (by rien > dummy-decoy)
• SubGHz -> New frequency analyzer - (by ClusterM)
• SubGHz -> Detect RAW feature - (by perspecdev)
• SubGHz -> Save last used frequency and modulation (by derskythe)
• SubGHz -> Press OK in frequency analyzer to use detected frequency in Read modes (by derskythe)
• SubGHz -> Long press OK button in SubGHz Frequency analyzer to switch to Read menu (by derskythe)
• Lock device with pin(or regular lock if pin not set) by holding UP button on main screen (by an4tur0r)

• Unofficial Discord: discord.unleashedflip.com

• Docs by atmanos / How to write your own app (outdated API): https://flipper.atmanos.com/docs/overview/intro

• Official Docs: http://docs.flipperzero.one

• Official Forum: forum.flipperzero.one

• applications - Applications and services used in firmware
• assets - Assets used by applications and services
• furi - Furi Core: os level primitives and helpers
• debug - Debug tool: GDB-plugins, SVD-file and etc
• documentation - Documentation generation system configs and input files
• firmware - Firmware source code
• lib - Our and 3rd party libraries, drivers and etc...
• site_scons - Build helpers
• scripts - Supplementary scripts and python libraries home

Also pay attention to ReadMe.md files inside those directories.