curitz is a CUrses-based Remote Interface To Zino, i.e. a terminal-based user interface to interact with a Zino server.

Split from internal project PyRitz on 2023-03-30.

There needs to be a file .ritz.tcl, conventionally placed in your home-directory.

Example .ritz.tcl:

set Secret ZINO1SERVERTOKEN_A
set User USERNAME_1
set Server my.zino.server.com
set Port 8001

set _Secret(ALTERNATE) ZINO1SERVERTOKEN_B
set _User(ALTERNATE) USERNAME_2
set _Server(ALTERNATE) alternative.zino.server.com
set _Port(ALTERNATE) 8001

The top four lines configures the default server. Secret and User is created by the admin of the zino server. Server and Port hopefully needs no explanation.

Running curitz without the -p-argument would connect to my.zino.server.com, authenticated as USER_1.

The bottom four lines are optional. They are an example of how to configure alternative servers. Running curitz with the /--argument would connect to the alternative server:

$ curitz -p ALTERNATE

This would connect to alternative.zino.server.com, authenticated as USER_2.

curitz is available on PyPI. The quickest way to install it is therefore using some variation of pip install. We recommend installing it into your own user environment in order to not interfere with system packages, like so:

pip install --user curitz

This should normally put the binary and library under .local on Linux.

If you have the uv tool available on your system, you can install and run curitz directly by issuing the command:

uvx curitz

If installing directly from a clone of this source code repository, you can install curitz (again, we recommend installing to your own user environment):

pip install --user .

After installing (and assuming your PATH environment variable is set correctly), the terminal program curitz will be available to run.

Run curitz -h for info about the available arguments.

This library is testable with unittests. When testing it starts a Zino emulator that reponds correctly to requests as the real server would do.

If you have all currently supported pythons in your path, you can test them all, with an HTML coverage report placed in htmlcov/:

tox

To test on a specific python other than current, run:

tox -e py{version}

where version is of the form "311" for Python 3.11.

Some minimal pre-commit hooks are included, install by running pre-commit install.

See the file .git-blame-ignore-revs for commits to ignore when running git blame. Use it like so:

git blame --ignore-revs-file .git-blame-ignore-revs FILE