References: https://www.raspberrypi.org/magpi/pi-zero-w-smart-usb-flash-drive/ https://www.raspberrypi.org/forums/viewtopic.php?t=164166 https://github.com/andreafabrizi/Dropbox-Uploader https://github.com/cimryan/teslausb/

<>

Create Fresh Raspian sd card

Setup cmdline.txt and config.txt adding otg params - no resize in cmdline by using (from mac cmdline)

./prepPiForFristBoot.sh teslapi https://github.com/frostymccool/teslausb/master/setup/pi

boot into pi

curl --fail -o "/tmp/createfs.sh" "https://raw.githubusercontent.com/frostymccool/TeslaCamPi/master/createfs.sh" chmod +x /tmp/createfs/sh sudo /tmp/createfs.sh

sudo reboot

curl "https://raw.githubusercontent.com/andreafabrizi/Dropbox-Uploader/master/dropbox_uploader.sh" -o /home/pi/dropbox_uploader.sh chmod +x /home/pi/dropbox_uploader.sh

echo dppw.txt echo y >> dppw.txt /home/pi/dropbox_uploader.sh < dppw.txt rm dppw.txt

curl --fail -o "/home/pi/dropbox-sync.py" "https://raw.githubusercontent.com/frostymccool/TeslaCamPi/master/dropbox-sync.py" chmod +x /home/pi/dropbox-sync.py

crontab -e */5 * * * * /home/pi/dropbox-sync.py

TBD: May need to unmount / remount to cleanly access cam drive If need to unmount, then lower the crontab checking to 30mins To add: Remove files that successfully upload - leave testing for a while first If remove files on upload, may need to remount drive anyway