gatsby-plugin-sharp dependency problem? #1754

bvaughn · 2017-08-09T23:24:21Z

Gatsby version: 1.7.2
Node.js version: 8.2.1
OS version: 10.12.16

I've ran into a problem after doing a clean install of this project. npm run dev failed with:

⠂ source and transform .../www/node_modules/bluebird/js/release/async.js:61
        fn = function () { throw arg; };
                           ^

Error: Cannot find module '../build/Release/sharp.node'

Looked like a dependency was missing. (I'm not sure why sharp didn't install initially, given it is listed as a dependency of gatsby-plugin-sharp.) Either way, I manually installed it (npm i --save sharp) and re-ran npm run dev. This time it failed with:

⠂ source and transform .../www/node_modules/bluebird/js/release/async.js:61
        fn = function () { throw arg; };
                           ^

Error: .../www/node_modules/sharp/build/Release/sharp.node, 1): Library not loaded: @rpath/libvips-cpp.42.dylib
  Referenced from: .../www/node_modules/sharp/build/Release/sharp.node
  Reason: Incompatible library version: sharp.node requires version 50.0.0 or later, but libvips-cpp.42.dylib provides version 49.0.0

I'm not familiar with either of these dependencies- but I looked at the gatsby-plugin-sharp package.json file and saw it was depending on sharp ^0.17.3. My locally installed sharp was 0.18.12. This should be compatible but I decided to downgrade to 0.17.3 anyway and after doing so- the errors above went away.

Edit 1: It looks like any of the 0.18.* versions fail with a node-gyp error. Perhaps this failure causes the install to fail silently for some reason, which may be why sharp is missing after a fresh install. Maybe you want to remove the "^" from your version specifier?

Unfortunately npm run dev now seems to consume a lot of memory and hang after the following:

$ npm run dev

> react-website@0.0.1 dev /Users/bvaughn/Documents/git/react/www
> gatsby develop

success open and validate gatsby-config.js — 0.006 s
success copy gatsby files — 0.023 s
⠁ source and transform nodesWarning: No slug found for "README.md". Falling back to default "/README.html".
Warning: No slug found for "index.md". Falling back to default "/index.html".
success source and transform nodes — 1.433 s
success building schema — 0.441 s
success createLayouts — 0.021 s
success createPages — 0.430 s
success createPagesStatefully — 0.027 s
success extract queries from components — 0.192 s
success run graphql queries — 9.198 s
success write out page data — 0.017 s
success update schema — 62.771 s

bootstrap finished, time since started: 76.526 s

### Hung here for at least a couple of minutes.
### Terminal is unresponsive (even to Ctrl+C).

Next I tried uninstalling gatsby-transformer-sharp and gatsby-plugin-sharp and removing them from my gatsby-config. After doing this, npm run dev worked (in that it quickly spun up an HTTP server, although the remark plugin logged an error about the missing sharp plugin).

Then I tried re-adding gatsby-transformer-sharp (npm i --save gatsby-transformer-sharp) and I was still able to start the dev-server.

Lastly I tried re-adding gatsby-plugin-sharp (npm i --save gatsby-plugin-sharp) and the dev server now hangs instead of starting up.

Any chance you have an idea what might be going on? Any debug/log output I could provide that might shed some light?

Edit 2: For what it's worth, I tried stepping Node down from 8.2.1 to 7.9.0 (another version I had installed) and re-npm-installing. (It seemed worth trying because this was the version of Node I was using a few weeks ago, when I first setup the Gatbsy site.) And sure enough, the server no longer hung after that- although things still look funky. I will keep investigating this and update the issue with my findings.

Edit 3: I'm losing my mind 😅 I did another clean install and now the dev server started up okay. Something seems to be going on with my machine, given the indeterminate behavior here, so I'm going to close this issue. I may still update it with my findings if I'm able to get to the bottom of this is a satisfactory manor.

The text was updated successfully, but these errors were encountered:

bvaughn · 2017-08-15T23:18:10Z

Just did yarn upgrade-interactive and ran back into this issue 😆

[5/5] 📃  Building fresh packages...
[1/4] ⠄ fsevents
[2/4] ⠄ uws
[3/4] ⠄ pngquant-bin
[4/4] ⠄ sharp
[1/4] ⠁ fsevents
[1/4] ⠄ fsevents
[-/4] ⠈ waiting...
[2/4] ⠈ uws
[3/4] ⠈ pngquant-bin
[4/4] ⠈ sharp
[-/4] ⠁ waiting...
[-/4] ⠁ waiting...
[3/4] ⠁ pngquant-bin
[4/4] ⠁ sharp
error /Users/bvaughn/Documents/git/react/www/node_modules/sharp: Command failed.
Exit code: 127
Command: sh
Arguments: -c node-gyp rebuild
Directory: /Users/bvaughn/Documents/git/react/www/node_modules/sharp
Output:
sh: node-gyp: command not found

$ yarn add node-gyp
[5/5] 📃  Building fresh packages...
success Saved 1 new dependency.
└─ node-gyp@3.6.2
✨  Done in 5.43s.

$yarn dev
error UNHANDLED EXCEPTION


  Error: Cannot find module '../build/Release/sharp.node'

  - module.js:11 require
    internal/module.js:11:18

  - constructor.js:8 Object.<anonymous>
    [www]/[sharp]/lib/constructor.js:8:15

  - module.js:11 require
    internal/module.js:11:18

  - index.js:3 Object.<anonymous>
    [www]/[sharp]/lib/index.js:3:15

bvaughn · 2017-08-15T23:30:24Z

FYI I tried a couple of clean installs of node_modules (even with yarn cache clean in between) but no love. However I just tried backing Node down from 8.2 to 7.9 with NVM and yarn install at least finished successfully this time. However, gatsby develop runs for ~2 minutes and then logs "bootstrap finished" and hangs.

KyleAMathews · 2017-08-15T23:33:44Z

So on the hanging issue. I have seen that. Haven't yet tried to debug it. From what I've found is if you kill the process and then restart it it starts quickly the second time.

jharris4 · 2017-08-16T03:53:31Z

@bvaughn not sure if it helps, but I ran into issues with yarn after upgrading to node 8 and npm 5.

It seems that node-gyp was bundled with node 7 but not with node 8.

Doing npm install -g node-gyp resolved the issues for me.

Here's the yarn issue: yarnpkg/yarn#3728

bvaughn · 2017-08-16T04:31:52Z

Thanks for the tip @jharris4!

Unfortunately I've tried downgrading to Node 7 (via NVM) and globally installing node-gyp but the result is the same- Gatsby hangs on startup afterward.

Killing the process and re-starting it as @KyleAMathews mentions does show "bootstrap finished" in a few seconds rather than ~2 minutes but the contents of .cache seem busted (maybe b'c of killing it in the middle?)

Even if it did resolve the cache issue, it's a pretty unsatisfying work-around. What if this happens on CI? or for other contributors? ☹️

KyleAMathews · 2017-08-16T04:33:40Z

Even if it did resolve the cache issue, it's a pretty unsatisfying work-around. What if this happens on CI? or for other contributors?

For shizzle. This didn't used to happen so it's some sort of timing whatever thing. It should be pretty easy to debug so let's get it fixed soon. It doesn't seem to show up except on larger sites so I haven't worried about it as much given other tasks at hand.

bvaughn · 2017-08-16T04:34:37Z

Of course! I didn't mean to sound complainy. (Hopefully I didn't!) 😄 Was just thinking out loud.

bvaughn · 2017-08-16T15:19:30Z

This morning gatsby develop ran until "Compiled successfully" but the rendered page seems to be missing most of its content. (The only thing served up is the header file and most of the CSS styles are also missing.) 😅

I tried stepping back to before the dependency bump (6a55b33) and re-installing but this time, the only thing rendered on the page, was the footer.

Next I deleted the .cache directory and restarted Gatsby again and now it seems to be stuck (~90 seconds to "bootstrap finished" and then stuck- for a couple of minutes now). My guess is that whatever causes it to hang seems to leave the .cache dir in a corrupted state.

FWIW I've tried this on Node 7.9.0, 8.2.0, and 8.4.0.

bvaughn · 2017-08-16T16:14:22Z

🤣 I left it running and stepped away from my computer. When I returned:

info bootstrap finished - 87.909 s


<--- Last few GCs --->

[69252:0x102801600]   275709 ms: Mark-sweep 1402.4 (1510.2) -> 1402.3 (1479.2) MB, 1451.0 / 0.0 ms  (+ 0.0 ms in 0 steps since start of marking, biggest step 0.0 ms, walltime since start of marking 1451 ms) last resort
[69252:0x102801600]   277163 ms: Mark-sweep 1402.3 (1479.2) -> 1402.3 (1479.2) MB, 1454.0 / 0.0 ms  last resort


<--- JS stacktrace --->

==== JS stack trace =========================================

Security context: 0x8e87721cef1 <JSObject>
    0: builtin exit frame: parse(this=0x8e87722e341 <JSON map = 0x3bce7810ec79>,0xd26f6770011 <String[81]: {"filter":{"fields":{"slug":{"eq":"/blog/2013/08/26/community-roundup-7.html"}}}}>)

    2: /* anonymous */(aka /* anonymous */) [/Users/bvaughn/Documents/git/react/www/node_modules/gatsby/dist/schema/run-sift.js:27] [bytecode=0x885d68cddf1 offset=81](this=0x8e877202241 <undefined>,_ref=0x3f...

FATAL ERROR: CALL_AND_RETRY_LAST Allocation failed - JavaScript heap out of memory
 1: node::Abort() [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 2: node::FatalException(v8::Isolate*, v8::Local<v8::Value>, v8::Local<v8::Message>) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 3: v8::internal::V8::FatalProcessOutOfMemory(char const*, bool) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 4: v8::internal::Factory::NewTransitionArray(int) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 5: v8::internal::TransitionArray::Insert(v8::internal::Handle<v8::internal::Map>, v8::internal::Handle<v8::internal::Name>, v8::internal::Handle<v8::internal::Map>, v8::internal::SimpleTransitionFlag) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 6: v8::internal::Map::CopyReplaceDescriptors(v8::internal::Handle<v8::internal::Map>, v8::internal::Handle<v8::internal::DescriptorArray>, v8::internal::Handle<v8::internal::LayoutDescriptor>, v8::internal::TransitionFlag, v8::internal::MaybeHandle<v8::internal::Name>, char const*, v8::internal::SimpleTransitionFlag) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 7: v8::internal::Map::CopyAddDescriptor(v8::internal::Handle<v8::internal::Map>, v8::internal::Descriptor*, v8::internal::TransitionFlag) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 8: v8::internal::Map::CopyWithField(v8::internal::Handle<v8::internal::Map>, v8::internal::Handle<v8::internal::Name>, v8::internal::Handle<v8::internal::FieldType>, v8::internal::PropertyAttributes, v8::internal::PropertyConstness, v8::internal::Representation, v8::internal::TransitionFlag) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
 9: v8::internal::Map::TransitionToDataProperty(v8::internal::Handle<v8::internal::Map>, v8::internal::Handle<v8::internal::Name>, v8::internal::Handle<v8::internal::Object>, v8::internal::PropertyAttributes, v8::internal::PropertyConstness, v8::internal::Object::StoreFromKeyed) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
10: v8::internal::LookupIterator::PrepareTransitionToDataProperty(v8::internal::Handle<v8::internal::JSObject>, v8::internal::Handle<v8::internal::Object>, v8::internal::PropertyAttributes, v8::internal::Object::StoreFromKeyed) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
11: v8::internal::Object::AddDataProperty(v8::internal::LookupIterator*, v8::internal::Handle<v8::internal::Object>, v8::internal::PropertyAttributes, v8::internal::Object::ShouldThrow, v8::internal::Object::StoreFromKeyed) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
12: v8::internal::JSObject::DefineOwnPropertyIgnoreAttributes(v8::internal::LookupIterator*, v8::internal::Handle<v8::internal::Object>, v8::internal::PropertyAttributes, v8::internal::Object::ShouldThrow, v8::internal::JSObject::AccessorInfoHandling) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
13: v8::internal::JSObject::DefinePropertyOrElementIgnoreAttributes(v8::internal::Handle<v8::internal::JSObject>, v8::internal::Handle<v8::internal::Name>, v8::internal::Handle<v8::internal::Object>, v8::internal::PropertyAttributes) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
14: v8::internal::JsonParser<true>::ParseJsonObject() [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
15: v8::internal::JsonParser<true>::ParseJsonValue() [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
16: v8::internal::JsonParser<true>::ParseJson() [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
17: v8::internal::Builtin_Impl_JsonParse(v8::internal::BuiltinArguments, v8::internal::Isolate*) [/Users/bvaughn/.nvm/versions/node/v8.4.0/bin/node]
18: 0x2a0caf9bc8dd

KyleAMathews · 2017-08-16T16:29:34Z

You hit node's heap limit. Try raising that.

bvaughn · 2017-08-16T16:30:37Z

Sure. But that's not expected, right? I was just mentioning it in case the unexpected memory usage was informative. 😄

I'm also not sure of how to increase Node's heap size in this context (short of aliasing npm on my system to run via node with a flag) but I'm sure I can figure that out. 😁

KyleAMathews · 2017-08-16T16:41:04Z

Nope. I'll look into it soon.

bvaughn · 2017-08-16T16:45:58Z

Yeah, no hurry at all. Just leaving a log here of everything to make it easier for you/me/whoever to reference later. 😄

I tried restarting my system to rule out any wonkiness but that didn't help. After killing gatsby develop just now I'm picking through the contents of the .cache directory, b'c I was starting to wonder if it was slurping in more than it should, and I noticed redux-state.json seemed suspiciously large (2.5M) but maybe that's not surprising. Otherwise the contents of the folder look reasonable at a glance.

bvaughn · 2017-08-16T20:11:13Z

I'm increasingly confident this broke with a specific, recent commit. I'm going to bisect the react Gatsby branch and will report back soon.

bvaughn · 2017-08-16T20:24:37Z

This ended up being caused by a more recent change than I suspected.

I stepped back a couple of weeks ago and everything seemed okay. Then I stepped forward about a day at a time. After checking out each revision, I ran:
rm -rf ./.cache && rm -rf ./.node_modules && yarn install && yarn dev.

Turns out that things went bad with this recent commit: 6a55b33. The commit before it (b6fb888) works fine, assuming I first install node-gyp as a global (which is kind of clowny but that's a separate issue).

The reason I saw the same hanging behavior toward the end of my initial issue was b'c I also ran yarn upgrade-interactive locally in an attempt to see if my original issue had already been fixed.

So one of the bumped dependencies seems to have caused this new permanently-hanging behavior. I'll try to step through individual plugins next.

bvaughn · 2017-08-17T18:25:39Z

Picked this back up this morning. Decided to identify the offending module by upgrading each (Gatsby + plugin + transform) individually and then do a clean build afterward.

It looks like the hanging behavior is caused by the gatsby package itself, somewhere between 1.3.2 and 1.8.11.

See the following blockers for the modules I didn't update: * gatsbyjs/gatsby#1844 * gatsbyjs/gatsby#1754

bvaughn · 2017-08-17T21:55:21Z

Narrowed it down further to gatsby@1.7.0 (so likely somewhere in here). I'll file a new issue about this since this one has gotten pretty noisy. 😄

bvaughn · 2018-02-22T21:25:22Z

This issue has come up again. All of the reactjs Netlify builds have been failing this week with the same error. They work only if I re-run without cache.

Has anything changed recently on the Gatsby side that would account for this?

I don't have the bandwidth to dig into it at the moment, but will try to find some time soonish.

nickeblewis · 2018-02-22T21:37:46Z

I’ve had similar issues with builds for my website this week and likewise I’ve not had much time to investigate. If I get the time, I will try running a similar debugging process to see if it’s the same as reported by other people in this thread.

bvaughn · 2018-02-22T22:02:31Z

If you beat me to it, I'd be grateful for any notes you left here about your findings :)

KyleAMathews · 2018-02-22T22:59:54Z

Nothing has changed here — Netlify did an update to their Docker build image I believe which updated Yarn and other things which might be affecting things. But none of our sites e.g. gatsbyjs.org were affected (though I think we explicitly set the YARN_VERSION though).

bvaughn · 2018-02-23T00:00:02Z

though I think we explicitly set the YARN_VERSION though

You're doing this via the "Build environment variables"?

KyleAMathews · 2018-02-23T00:01:15Z

Yeah.

BTW, does it build locally? Or are you having troubles there too?

bvaughn · 2018-02-23T00:06:32Z

Sharp has on again, off again caused pain for me locally too. I think we've chatted about it a time or two. Generally a clean install fixes it.

bvaughn · 2018-02-23T00:06:59Z

Which Yarn version are you pinned to btw

fk · 2018-02-23T12:46:56Z

FWIW (might be unrelated) I also had a project using Yarn 0.27.5 in netlify.toml. Last week I decided to bump that to the latest stable Yarn—which I think was 1.3.0 at the time—and ran into build problems with Netlify after that. Then I stumbled upon #3570 and according to the information there gave Yarn 1.4.0 a try, but still had issues. I followed 3570#issuecomment-363591653 by @lourd to yarnpkg/yarn#5152 (comment) and edited netlify.toml accordingly, adding --no-ignore-optional:

[build]
  command = "yarn run build"
  publish = "public"

[build.environment]
  NODE_VERSION = "9.5.0"
  YARN_VERSION = "1.4.0"
  YARN_FLAGS = "--no-ignore-optional"

After that things built fine again on Netlify without having to manually purge the cache.

devdigital · 2018-03-05T12:52:03Z

sharp 0.20.0 is now released, do you have an ETA on the plugin using the updated version? thanks

m-allanson · 2018-03-05T13:33:51Z

@devdigital It should be fairly soon, see #4365

gatsbyjs/gatsby#1754

osartun · 2018-11-26T16:53:27Z

Just FYI: I'm also running into this when I start the development server. So, whatever the reason is was either not entirely fixed or there's a new reason why there are problems with sharp.
Previously I just had the develop command in package.json altered to:

"develop": "rm -rf ./.cache && gatsby develop"

Removing the cache was fine because we only recently started developing the site and we didn't have that much data in the cache.

However, now I'm adding gatsby-source-wordpress to pull in the data from the old website and clearing the cache with every startup would likely significantly increase the startup time.
So, I'm looking for a different solution now.

This is the error I'm getting multiple times when starting the gatsby development server without clearing the cache beforehand:

error Plugin gatsby-transformer-sharp returned an error


  Error: dlopen(.../node_modules/sharp/build/Release/sharp.node, 1): Library not loaded: @rpath/libvips-cpp.dylib
    Referenced from: .../node_modules/sharp/build/Release/sharp.node
    Reason: image not found

That error looks very similar to one of the errors in the first post of this issue.

osartun · 2018-11-26T17:21:43Z

FYI #2: It seems like this issue helped solving it lovell/sharp#939
I ran

$ brew install vips --with-webp --with-graphicsmagick
$ rm -rf node_modules
$ yarn install

When starting the gatsby development server afterwards I didn't get these error messages. However, I got other ones:

…
success source and transform nodes — 101.424 s
error Cannot read property 'internal' of null


  TypeError: Cannot read property 'internal' of null

  - infer-graphql-input-fields.js:346 _.each
    [publizist-frontend-gatsby]/[gatsby]/dist/schema/infer-graphql-input-fields.js:346:38
  …

dist/schema/infer-graphql-input-fields.js:346:38 maps to this code here:

gatsby/packages/gatsby/src/schema/infer-graphql-input-fields.js

Lines 283 to 286 in b5b43d5

    
           // Get from cache if found, else store into it 
        
           if (linkedNodeCache[linkedNode.internal.type]) { 
        
             value = linkedNodeCache[linkedNode.internal.type] 
        
           } else {

Cannot read property 'internal' of null means that for whatever reason there seem to be null nodes in the .cache.

lovell · 2018-11-26T18:57:33Z

@osartun The vips brew package doesn't have to be installed for sharp to work on OS X (but if present it will be used). Based on the error here I suspect something went wrong during npm install, perhaps a temporary networking problem.

osartun · 2018-11-27T09:09:46Z

@lovell Hm, good to know. And also weird. I've deleted and reinstalled all packages of the project multiple times as there were errors every now and then that could be solved by just reinstalling all packages. And yet I'm pretty sure I've got this Library not loaded … error every time I didn't delete the cache before starting up the development server. And I don't think there was a network problem every time I reinstalled the packages.
Might be more complex than I think. Maybe the reason this error didn't show up after installing vips with brew was related to reinstalling the npm packages and not to vips being present.

For the project at hand I'm probably going with some workaround for now. I hope at some point I have time to investigate the issue to figure out what the cause is.

phetw · 2018-12-05T04:03:30Z

I did encounter the similar error with v 2.0.60.

    Referenced from: .../node_modules/sharp/build/Release/sharp.node
    Reason: image not found

fixed just by removing .cache and node_modules then reinstall.

aamorozov · 2018-12-14T06:55:07Z

Looks like this errors still occurs in the latest version of gatsby/gatsby-plugin-sharp:

  System:
    OS: macOS 10.14
    CPU: (8) x64 Intel(R) Core(TM) i7-4770HQ CPU @ 2.20GHz
    Shell: 3.2.57 - /bin/bash
  Binaries:
    Node: 11.3.0 - /usr/local/bin/node
    Yarn: 1.12.3 - /usr/local/bin/yarn
    npm: 6.4.1 - /usr/local/bin/npm
  Browsers:
    Chrome: 71.0.3578.98
    Firefox: 64.0
    Safari: 12.0
  npmPackages:
    gatsby: 2.0.63 => 2.0.63
    gatsby-image: 2.0.22 => 2.0.22
    gatsby-plugin-favicon: 3.1.4 => 3.1.4
    gatsby-plugin-flow: 1.0.2 => 1.0.2
    gatsby-plugin-force-trailing-slashes: 1.0.4 => 1.0.4
    gatsby-plugin-jsxstyle: 0.0.4 => 0.0.4
    gatsby-plugin-manifest: 2.0.11 => 2.0.11
    gatsby-plugin-offline: 2.0.18 => 2.0.18
    gatsby-plugin-react-helmet: 3.0.4 => 3.0.4
    gatsby-plugin-sharp: 2.0.14 => 2.0.14
    gatsby-source-filesystem: 2.0.12 => 2.0.12
    gatsby-source-graphql: 2.0.7 => 2.0.7
    gatsby-transformer-json: 2.1.6 => 2.1.6
    gatsby-transformer-sharp: 2.1.9 => 2.1.9
  npmGlobalPackages:
    gatsby-cli: 2.4.6
    gatsby: 1.9.277

daydream05 · 2018-12-31T18:59:58Z

I'm also running into the same issue when deploying to netlify.

System:
    OS: macOS High Sierra 10.13.6
    CPU: (8) x64 Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
    Shell: 3.2.57 - /bin/bash
  Binaries:
    Node: 10.0.0 - /usr/local/bin/node
    Yarn: 1.6.0 - ~/.yarn/bin/yarn
    npm: 6.4.1 - /usr/local/bin/npm
  Browsers:
    Chrome: 71.0.3578.98
    Firefox: 64.0
    Safari: 12.0.2
  npmPackages:
    gatsby: next => 2.0.0-rc.28
    gatsby-image: next => 2.0.0-rc.4
    gatsby-plugin-canonical-urls: next => 2.0.0-rc.2
    gatsby-plugin-feed: next => 2.0.0-rc.2
    gatsby-plugin-google-analytics: next => 2.0.0-rc.2
    gatsby-plugin-manifest: next => 2.0.2-rc.1
    gatsby-plugin-netlify: next => 2.0.0-rc.6
    gatsby-plugin-nprogress: next => 2.0.0-rc.1
    gatsby-plugin-offline: next => 2.0.0-rc.9
    gatsby-plugin-react-helmet: next => 3.0.0-rc.1
    gatsby-plugin-sitemap: next => 2.0.0-rc.2
    gatsby-plugin-styled-components: next => 3.0.0-rc.5
    gatsby-plugin-svgr: next => 2.0.0-alpha
    gatsby-plugin-typography: next => 2.2.0-rc.3
    gatsby-remark-external-links: 0.0.4 => 0.0.4
    gatsby-remark-prismjs: next => 3.0.0-rc.2
    gatsby-source-contentful: next => 2.0.1-rc.9
    gatsby-source-filesystem: next => 2.0.1-rc.6
    gatsby-transformer-remark: next => 2.1.1-rc.5
    gatsby-transformer-sharp: next => 2.1.1-rc.3
  npmGlobalPackages:
    gatsby-cli: 2.4.5

UPDATE:
I just updated the gatsby-plugin-manifest- to 2.0.13 and it works

philohelp · 2019-02-24T20:35:04Z

I'm having an error in the netlify build too, Sharp seems involved.

9:25:21 PM: Executing user command: gatsby build
9:25:24 PM: success open and validate gatsby-configs — 0.179 s
9:25:25 PM: success load plugins — 0.339 s
9:25:25 PM: error Plugin gatsby-transformer-sharp returned an error
9:25:25 PM:
9:25:25 PM: Error: Could not locate the bindings file. Tried:
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/build/s harp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/build/D ebug/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/build/R elease/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/out/Deb ug/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/Debug/s harp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/out/Rel ease/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/Release /sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/build/d efault/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/compile d/8.15.0/linux/x64/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/addon-b uild/release/install-root/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/addon-b uild/debug/install-root/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/addon-b uild/default/install-root/sharp.node
9:25:25 PM: → /opt/build/repo/node_modules/gatsby-plugin-sharp/node_modules/sharp/lib/bin ding/node-v57-linux-x64/sharp.node
9:25:25 PM:
9:25:25 PM: - bindings.js:124 bindings
9:25:25 PM: [repo]/[bindings]/bindings.js:124:9
9:25:25 PM:
9:25:25 PM: - constructor.js:10 Object.
9:25:25 PM: [repo]/[gatsby-plugin-sharp]/[sharp]/lib/constructor.js:10:34
9:25:25 PM:
9:25:25 PM: - v8-compile-cache.js:178 Module._compile
9:25:26 PM: failed during stage 'building site': Build script returned non-zero exit code: 1
9:25:25 PM: [repo]/[v8-compile-cache]/v8-compile-cache.js:178:30
9:25:25 PM:
9:25:25 PM: - v8-compile-cache.js:159 require
9:25:25 PM: [repo]/[v8-compile-cache]/v8-compile-cache.js:159:20
9:25:25 PM:
9:25:26 PM: Shutting down logging, 25 messages pending

acollien · 2019-03-23T11:06:02Z

Me too! Started happening after I tried with a new theme. Switched back and now it's fail-city.

Logs here: https://pastebin.com/7rZ2nH7C

Blumed · 2019-04-27T07:32:54Z

Just had this issue happen to me. Interesting enough I was working in another directory with an older version of gatsby blog starter but I want to start fresh. So, I downloaded a fresh copy and ran into the error above. I was forced to downgrade my node version. Current stable node version is: 12.0.0. This version creates the head ache seen above. node v11.14.0 worked for me and it worked perfectly. Didn't have to add dependancies separately it just worked. Hope this helps someone :)

GainorB · 2019-05-01T13:35:55Z

Any update here? This is a headache.. Why was this closed? What is the solution?

prasanna-munnangi · 2019-05-15T14:39:02Z

this isn't working. can some mention the specific package version of gatsby's which worked.

nok91 · 2019-08-27T15:11:34Z

Fixed by updating gatsby-plugin-manifest:

..
 "gatsby-plugin-manifest": "^2.2.9",
...

anubhavsrivastava · 2019-08-27T17:38:03Z

Read the entire thread, couldn't get anything. This problem has started to show again with netlify and travis CI builds.

jpcmf · 2019-08-27T20:42:57Z

Deploy to Netlify still not work...

5:37:56 PM: success write out redirect data — 0.021
5:37:56 PM: node: symbol lookup error: /opt/build/repo/node_modules/sharp/build/Release/sharp.node: undefined symbol: _ZNK4vips6VImage7pngsaveEPKcPNS_7VOptionE
5:37:56 PM: npm
5:37:56 PM:  ERR! file sh

nok91 · 2019-08-28T09:09:11Z

Wrap with Provider
Create a new file at the root of your project named wrap-with-provider.js. This file will be imported in our gatsby-browser and gatsby-ssr and wrapped around our entire application allowing any component to access our store.

import React from 'react';
import { Provider } from 'react-redux';
import createStore from './src/state/createStore';

export default ({ element }) => (
  <Provider store={createStore()}>
      {element}
  </Provider>
);

Gatsby SSR and Browser
Gatsby SSR and Browser files will be identical. Create a gatsby-ssr.js and gatsby-browser.js file at the root of your projects directory.

import wrapWithProvider from "./wrap-with-provider"
export const wrapRootElement = wrapWithProvider

This works for me on develop and building env

sayjeyhi · 2019-09-24T03:28:59Z

I have same problem ...

gyp info it worked if it ends with ok
gyp info using node-gyp@5.0.3
gyp info using node@10.16.1 | darwin | x64
gyp info find Python using Python version 2.7.10 found at "/usr/bin/python"
gyp info spawn /usr/bin/python
gyp info spawn args [ '/Users/macbook/.nvm/versions/node/v10.16.1/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/Users/macbook/Desktop/gatsby-blog/node_modules/sharp/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/Users/macbook/.nvm/versions/node/v10.16.1/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/Users/macbook/Library/Caches/node-gyp/10.16.1/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/Users/macbook/Library/Caches/node-gyp/10.16.1',
gyp info spawn args   '-Dnode_gyp_dir=/Users/macbook/.nvm/versions/node/v10.16.1/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/Users/macbook/Library/Caches/node-gyp/10.16.1/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/Users/macbook/Desktop/gatsby-blog/node_modules/sharp',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.' ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
  TOUCH Release/obj.target/libvips-cpp.stamp
  CXX(target) Release/obj.target/sharp/src/common.o
In file included from ../src/common.cc:20:
In file included from /Library/Developer/CommandLineTools/usr/include/c++/v1/mutex:191:
In file included from /Library/Developer/CommandLineTools/usr/include/c++/v1/__mutex_base:17:
/Library/Developer/CommandLineTools/usr/include/c++/v1/__threading_support:27:11: fatal error: 'pthread.h' file not found
# include <pthread.h>
          ^~~~~~~~~~~
1 error generated.
make: *** [Release/obj.target/sharp/src/common.o] Error 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/Users/macbook/.nvm/versions/node/v10.16.1/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:196:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Darwin 18.7.0
gyp ERR! command "/Users/macbook/.nvm/versions/node/v10.16.1/bin/node" "/Users/macbook/.nvm/versions/node/v10.16.1/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /Users/macbook/Desktop/gatsby-blog/node_modules/sharp

TepyThai · 2019-10-16T08:05:16Z

I was having this problem regarding gatsby-plugin-sharp and the problem got resolved by upgrading my dependencies. I hope it helps.

zilahir · 2019-10-16T08:07:06Z

for me this problem caused by changing node version globally.

rm -rf node_modules, then

npm i

helped.

lxynox · 2019-10-16T08:18:02Z

for me this problem caused by changing node version globally.

rm -rf node_modules, then

npm i

helped.

@zilahir can you share your node/npm version? eg npm -v && node -v

zilahir · 2019-10-16T08:21:18Z

@lxynox sure.

➜  ~ npm --version
6.10.2

terwer · 2022-03-08T02:49:25Z

@bvaughn not sure if it helps, but I ran into issues with yarn after upgrading to node 8 and npm 5.

It seems that node-gyp was bundled with node 7 but not with node 8.

Doing npm install -g node-gyp resolved the issues for me.

Here's the yarn issue: yarnpkg/yarn#3728

Thanks，it worked.

bvaughn closed this as completed Aug 9, 2017

bvaughn added a commit to bvaughn/react that referenced this issue Aug 17, 2017

Updated all Gatbsy plugins/transforms that can be safely updated

24fa5d4

See the following blockers for the modules I didn't update: * gatsbyjs/gatsby#1844 * gatsbyjs/gatsby#1754

bvaughn mentioned this issue Aug 17, 2017

Memory-related regression introduced in gatsby@1.7.0 #1849

Closed

fk added the API/Plugins label Jan 19, 2018

gillkyle mentioned this issue Feb 7, 2018

Gatsby library search page #3456

Closed

Vagr9K mentioned this issue Apr 7, 2018

update yarn.lock Vagr9K/gatsby-advanced-starter#26

Closed

coreybruyere added a commit to coreybruyere/coreybruyere-netlify-cms that referenced this issue May 29, 2018

Update Gatsby and Gatsby image plugins to fix error.

644e8e4

gatsbyjs/gatsby#1754

zapbampow mentioned this issue Aug 2, 2018

Difficulty installing gatsby-plugin-sharp - node-gyp errors #6976

Closed

iammatthias referenced this issue in iammatthias/com Aug 30, 2019

Update package.json

5a26015

LekoArts mentioned this issue Nov 13, 2019

gatsby-plugin-sharp fails new <site> command #19432

Closed

gatsby-plugin-sharp dependency problem? #1754

gatsby-plugin-sharp dependency problem? #1754

Comments

bvaughn commented Aug 9, 2017 • edited Loading

bvaughn commented Aug 15, 2017

bvaughn commented Aug 15, 2017

KyleAMathews commented Aug 15, 2017

jharris4 commented Aug 16, 2017

bvaughn commented Aug 16, 2017

KyleAMathews commented Aug 16, 2017

bvaughn commented Aug 16, 2017

bvaughn commented Aug 16, 2017 • edited Loading

bvaughn commented Aug 16, 2017 • edited Loading

KyleAMathews commented Aug 16, 2017

bvaughn commented Aug 16, 2017 • edited Loading

KyleAMathews commented Aug 16, 2017

bvaughn commented Aug 16, 2017 • edited Loading

bvaughn commented Aug 16, 2017 • edited Loading

bvaughn commented Aug 16, 2017 • edited Loading

bvaughn commented Aug 17, 2017 • edited Loading

bvaughn commented Aug 17, 2017 • edited Loading

bvaughn commented Feb 22, 2018

nickeblewis commented Feb 22, 2018

bvaughn commented Feb 22, 2018

KyleAMathews commented Feb 22, 2018

bvaughn commented Feb 23, 2018

KyleAMathews commented Feb 23, 2018

bvaughn commented Feb 23, 2018

bvaughn commented Feb 23, 2018

fk commented Feb 23, 2018

devdigital commented Mar 5, 2018

m-allanson commented Mar 5, 2018

osartun commented Nov 26, 2018

osartun commented Nov 26, 2018 • edited Loading

lovell commented Nov 26, 2018

osartun commented Nov 27, 2018

phetw commented Dec 5, 2018

aamorozov commented Dec 14, 2018

daydream05 commented Dec 31, 2018 • edited Loading

philohelp commented Feb 24, 2019

acollien commented Mar 23, 2019

Blumed commented Apr 27, 2019

GainorB commented May 1, 2019 • edited Loading

prasanna-munnangi commented May 15, 2019

nok91 commented Aug 27, 2019

anubhavsrivastava commented Aug 27, 2019

jpcmf commented Aug 27, 2019

nok91 commented Aug 28, 2019 • edited Loading

sayjeyhi commented Sep 24, 2019

TepyThai commented Oct 16, 2019

zilahir commented Oct 16, 2019

lxynox commented Oct 16, 2019

zilahir commented Oct 16, 2019

terwer commented Mar 8, 2022

bvaughn commented Aug 9, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 16, 2017 •

edited

Loading

bvaughn commented Aug 17, 2017 •

edited

Loading

bvaughn commented Aug 17, 2017 •

edited

Loading

osartun commented Nov 26, 2018 •

edited

Loading

daydream05 commented Dec 31, 2018 •

edited

Loading

GainorB commented May 1, 2019 •

edited

Loading

nok91 commented Aug 28, 2019 •

edited

Loading