Frame

(10) Pack 7/8" Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart

Conduit Clip, 7/8" Tube, For 7/32", 3/16" & 1/4" Conduit

(10) Pack Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart

Conduit Clip, 3/4" Tube, For 7/32" & 1/4" Conduit

(10) 1" Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart

(10) Pack - 1" Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart Conduit Clip, 1" Tube, For 7/32" & 1/4" Conduit

Torque Converter Motor Riser Plate for 196cc/212cc Engines on Coleman Mini Bikes

Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes Hardware to install the engine to the plate, and the plate to the frame. Fits Coleman 200 Series bikes Without modifying the frame or Torque converter. Fits many mini bikes...

5" x 5/8" Weld On Mini Bike Fork Neck w/ Bronze Bushings

5" x 5/8" Weld On Mini Bike Fork Neck w/ Bronze Bushings 5" Long x 1" OD DOM Tube recessed for bronze bushings.

Black Torque Converter Engine Riser Plate + Hardware Kit

Powder Coated Black Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes the following: (1) Torque Converter Riser Plate (4) SAE Engine to Plate Bolts (4) SAE Nuts and Bolts to hold the plate to the frame (1) Grade 8 SAE Torque...

Torque Converter Engine Riser Plate + Hardware Kit

Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes the following: (1) Torque Converter Riser Plate (4) SAE Engine to Plate Bolts (4) SAE Nuts and Bolts to hold the plate to the frame (1) Grade 8 SAE Torque Converter Clutch...

Torque Converter Engine Riser Plate

Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes Hardware to install the engine to the plate, and the plate to the frame. Fits Coleman 200 Series bikes Without modifying the frame or Torque converter. Fits many mini bikes...

Bonanza Chopper Rear Axle Mounts / Suspension

Bonanza Chopper Rear Axle Mounts / Suspension Reproduced from an original set. 

Bonanza Chopper Sissy Bar

1" Vintage Mini Bike Custom Fork Kit - U-Weld-It

1" Mini Bike Fork Kit. 32" Long Kit Includes: 1" x 32" L Forks with Triple Trees (2) 5/8 Id spacers for the axle mount

7/8" Vintage Mini Bike Custom Fork Kit - U-Weld-It

7/8" Mini Bike Fork Kit. 32" Long Kit Includes: 7/8"x .083 DOM x 33" L Forks with Triple Trees (34" with the axle mount) (2) 5/8 Id spacers for the axle mount (1) 5" Weld on Fork Neck Spacing between the forks is 5"

Go Kart Throttle & Brake Pedal Kit

Throttle & Brake Pedals for AZUSA Go-Karts, fits many others as well. 

Bonanza Chopper Triple Trees - 1"

Pair of 1" Triple Trees. Fits many others. Holes are 1" for the fork tubes 5" Center to Center between Forks

Torque Converter Engine Riser Plate w/Stage 1 Header Silicone Wrap

Powder Coated Black Torque Converter Riser Plate for Predator Engines, Honda Clones, etc. Includes Hardware to install the engine to the plate, and the plate to the frame. Fits Coleman 200 Series bikes Without modifying the frame or Torque converter...

Conduit Clamp, 1/4" ID, For 1/4" & 9/32" Conduit

Conduit Clamp, 1/4" ID, For 1/4" & 9/32" Conduit

Conduit Clamp, 7/32" ID, For 3/16 & 7/32" Conduit

Conduit Clamp, 7/32" ID, For 3/16 & 7/32" Conduit

Conduit Clip, 3/4" Tube, For 7/32" & 1/4" Conduit

Conduit Clip, 3/4" Tube, For 7/32" & 1/4" Conduit

1" Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart

1" Conduit Clip for Throttle & Brake Cables - Vintage Mini Bike & Go Kart Conduit Clip, 1" Tube, For 7/32" & 1/4" Conduit

Conduit Clip, 7/8" Tube, For 7/32", 3/16" & 1/4" Conduit

Conduit Clip, 7/8" Tube, For 7/32", 3/16" & 1/4" Conduit

Steel Fender 14.5" x 3.75" Tall x 4.2" Wide

Fender, Steel, Not Plated 14.5" Length, 3.75" Height, Maximum Width 4.2" For 4", 5" & 6" Tires for 4", 5", 6" and 8" Wheels; manufactured From cold rolled Steel.

Vintage Mini Bike Folding Foot Pegs - with Mounts (Pair)

Long Mounting studs; sturdy rubber treads; Pegs fold up when not in use.

Vintage Mini Bike Folding Foot Pegs (Pair)

Long Mounting studs, sturdy rubber treads, fold up when not in use

Kick Stand with Return Spring for Mini-Bike

Sturdy design, Zinc-Plated Steel. Requires a Mounting Bracket. (Also see #1728.)

Weld on Bracket for Mini-Bike Kick Stand

Weld on Bracket only, for 1729 Kick Stand. Works well for Custom Mini Bikes, Choppers and more. 

Vintage Mini Bike Kickstand with Weld on Bracket

For small vehicles like Mini-Bikes. Sturdy design of Zinc-Plated Steel. Has a Return Spring. Complete with Mounting Bracket.

Push Button Engine Kill Switch - On/Off

Spring Loaded Ground contact Switch fits 7/8" or 1" frame or handle bars. 36" Shielded wire, with a spade Type End Fitting. A must safety device for any engine.