Apps, radio tools and open-source firmware, lined up along one road. Steer into the left or right gate to open a project. Skip one and it waits for you at the next gate. Hold B to fire the thrusters and take off. After the top projects you pull into my pit. The store apps come first, then the repos with the most GitHub stars.
←→ steer↑ gas↓ brakeSpace autopilotB boosterM musicL list
Hold the left or right half of the screen to steer.Autopilot keeps the speed. ▲ gas, ▼ brake, B booster.Music on: switch off silent mode.
All projects
Finish ·
You made it to the end of the road.
You saw the top projects. There are more in the full list, plus the websites I run and a little 3D-print shop.
Your browser could not start WebGL. All projects are in the list instead.
Peter Holzhauser
AI developer in Stuttgart. Apps, radio tools and open source. This browser cannot run the driving game; here are the projects as a list.
Apps
V2X2MAP: Live map of ITS-G5 / V2X traffic radio on 5.9 GHz. Traffic lights per lane, countdowns, green-wave speed and emergency-vehicle alerts, on the phone, in Android Auto and in CarPlay. Needs a $20 ESP32-C5 receiver.
QTc Tracker: Reads the QT/QTc interval from Apple Watch ECG recordings, logs SSRI and SNRI doses, shows the trend and builds a PDF for the doctor. All data stays on the phone.
Okteye (coming soon): Okteye turns an ESPARGOS board with eight antennas into a Wi-Fi direction finder. It shows where each transmitter sits: as an overlay in the live camera view (EspargosVR), on a compass rose and on the map, plus spectrum, radar and motion detection. iPhone, iPad and Android.
ClimaPilot: Controls Midea air conditioners locally over Wi-Fi. No account, no ads, widgets on the home screen. Free and open source, also on F-Droid.
Funkl-Go (coming soon): A collecting game on real streets: shop windows, cafés and events hide small lamps that flash light codes. Point your iPhone at a lamp, hold still, read the code and catch the Funkl inside, with a serial-numbered card you can trade by flashing it between two phones. No ads, no in-app purchases.
Open source
ESPsoup: Scoop signals from the frequency soup. A receive-only radio scanner: spectrum, waterfall, panorama sweep, BLE, Zigbee, Wi-Fi and analog TV.
muxwright: Multi-standard test transmitter for the ADALM-Pluto: DAB+, FM/RDS/RBDS, DVB-T/T2/C/S/S2, ATSC, ISDB-T, DTMB, J.83B, PAL/NTSC and QO-100 DATV from one browser dashboard.
espsoup-p4-bridge: ESPsoup on the Waveshare ESP32-P4 module: the on-module ESP32-C6 as a receive-only SDR, bridged by the P4 to Ethernet (~10 MB/s) and USB. Bridge firmware, web flasher and tools.
etherbulb: The lamp that shows you the air. An ESP32-C3 smart bulb turned into a receive-only radio that glows in a colour per signal type.
tremvia: Vibration and noise meter with FFT and PDF report.
marstek-cell-monitor: Live LiFePO4 cell voltages of a Marstek Venus E via Home Assistant.
mr60bha2-radar-console: Local dashboard for MR60BHA2 / HLK-LD6002 60 GHz breathing and heartbeat radars, with a browser-based Web Serial flasher.