How to apply wood veneer

Applying wood veneer was once rumored to be a difficult task, reserved mainly for seasoned professionals. These days, since tools and supplies are readily available and many of the methods are so simple, even a novice woodworker can easily...

It may seem impossible but these easy to follow steps on how to apply wood veneer to a curved surface worked for me, they will work for you.

Erin Shuford • DIY Furniture Flips • MCM Refinishing on Instagram: "➡️ Share this if you found it helpful! ⬅️ This is how I fix burned through veneer! This happens when you’re sanding a bit too aggressively, or when you’re using too low of a grit on an area of veneer. Veneer is a thin sheet of higher quality wood glued over a lower quality wood. It can be sanded and stained as normal, you just have to handle it with a bit more care than solid wood. You can find these products linked in my A

This is the first in a three-part story, each showing a different way of applying veneer to a substrate. When veneering wood, it is important to remember a couple of things. First, and foremost, veneer always needs to be counterbalanced, meaning, ALWAYS apply veneer to both sides of the substrate. When glue is applied between two surfaces, it shrinks, or contracts when it dries. This contraction pulls the surface in tension and cups it. To balance this out, the exact procedure should be…

Kreg Tool

By Bruce Kieffer Most woodworkers cringe at the thought of applying wood edging to a plastic-laminated top. Unlike wood veneer surfaces, you can’t sand this edging flush without scratching the…

Simple and easy step-by-step instruction for applying veneer with contact cement! The only veneering tutorial you'll ever need!You can read the whole tutoria...

A special cut of veneer can turn a project from ordinary to extraordinary, but you get the cool look that you are after, you will have to learn how to attach veneer to a substrate. Many woodworkers are intimidating by the idea of gluing veneer themselves. They have concerns that special tools and glues will be needed, along with tricky techniques that will have to be used. Don’t worry, gluing veneer is actually not hard at all! Gluing veneer can be done effectively by following a few simple…

Have you removed veneer before? Yeah, it sucks. If you dry scrape, it can take ages and seem impossible. If you wet scrape, it still is long, hard work. This ti…

Did you remember to bring your sanding equipment? You’re going to need if for this week’s sanding techniques. Dave Munkittrick teaches you a simple memory trick that he likes to use when he is sanding his woodworking projects. Rather than leaving a project overnight, coming back to it in the morning and guessing which grit he was using, Dave writes the grit directly on the part of the piece that he’s sanding.