Feels like home.
Snap on a new superpower.
Read, write & emulate.
13.56 MHz125 kHz
Share what you build.
Browse what the community ships: games, tools and toys. Run them on your Kode Dot.
Program it like any ESP32
Power is not an excuse anymore.
Main dual core processor up to 400MHz
Low power 2.4-5GHz WIFI, BLE, Zigbee
From idea to prototype in minutes.
Don't spend a lot of time putting together cables, screen, buttons, ...
Start right over
RF bench in your pocket.
- SubGHz
- 2.4GHz
- WiFi6
Snap on the F*CK module to unlock all the pentesting power. Always with responsibility :)
Just have fun.
- Apps
- Modules
- Watch faces
Collect modules, hoard community apps, hack your watch face. The gadget you always wanted to fidget with.
Small device. Big toolbox.
Every chip, sensor and port the Kode Dot packs in.
ESP32-P4 + C5
The P4 runs everything; the C5 does the wireless.
2.13″ AMOLED display
A crisp 502×410 touch panel.
32 MB PSRAM · 32 MB flash
Real memory headroom for real apps.
NFC · RFID · IR
Read and emulate tags, cards and remotes.
CO5300 display driver
Drives the AMOLED over MIPI-DSI, smooth and fast.
CST820 touch
Quick, accurate capacitive touch.
9-axis IMU
6-axis LSM6DSV plus a LIS2MDL compass: a full 9-axis motion stack.
ST25R3916B NFC
Read, write and emulate 13.56 MHz tags.
125 kHz RFID
Read and emulate cards through a discrete analog front-end.
IR transceiver
Blast and capture infrared. Learn any remote.
microSD (SD/MMC)
Removable storage for data and big apps.
Speaker + mic
ES8311 codec and NS4150B class-D amp drive the speaker, plus an on-board mic.
Haptic vibration motor
Crisp vibration feedback from an AW86233 LRA driver.
BQ25896 PMIC
USB-C charging with power path and OTG.
CW2217 fuel gauge
Knows exactly how much battery is left.
LiPo battery
Power your projects. Capacity TBD.
Battery-backed RTC
Keeps real time on the always-on domain.
USB-C + JTAG
Flash, charge, debug and USB OTG, all over one port.
Magnetic pogo connector
Charge in or power out, plus two programmable GPIOs.
20-pin GPIO header
14 programmable GPIOs, plus 5 V and 3.3 V rails up to 2 A each.
D-pad + 2 buttons
A 4-button D-pad and two extra buttons for games and menus.
KTD2026 RGB LED
An addressable status light to play with.