Pot glazing ideas

Carole's Pottery: Ombré effect. Ice Celadon 3x with Seaweed sponged on at bottom and Dark Green nearer the top 3x each. Start at bottom and overlap colors.

Pinar Sayin | Finally I am fully satistified with a carved mug. Super clean lines and the glaze sat just right in every line without dripping. Yes, she... | Instagram

Planter inspo 🪴 Starting to glaze pots for my next restock & it’s always fun to look at previous pieces I’ve made. Assuming all goes well in the kiln, I should have about 15 pots available ranging in size from 3 inches to 6ish inches. Cheers! 🥂

Speckled buff clay. Orange beige glaze on bottom half. Strip of unglazed clay through the middle. Top half is satin matte green with clear over it. Inside is just clear glaze.

From Victoria Ward Pottery: These are some more of my favourite Amaco glaze combinations. White Earthstone stoneware clay ES5. The base glazes are all x 3 all over, the mid glaze is x 2 on top of this covering the top two thirds of the vessel. I usually choose a runny glaze for the top and apply it just around the rim to encourage the dripping effect. Bottom right is only two glazes but Ancient Jasper is extremely runny! I fire to 1200c in an electric kiln with a 20 min hold (cone5/6)

judith on Instagram: "i had a ton of fun making these tumblers and i have a few more that need to be bisqued + glazed - but I’m sick of these bad boys and will prolly get obsessed with bowls soon! . . . . . . . . #ceramics #wheelthrownceramics #clay #handmadepottery #pottery #seattlepottery #ceramicartist #handmadepottery #wheelthrowing #handmadeceramics #ceramicplanter #claylife #wheelthrownpottery #potteryofinstagram #potterystudio #potteryforall #modernceramics #potteryofinstagram…

Chun Plum x3, then Seaweed x2 on rim.