3d printed cable organizer

Created a simple design to organize the cables of my 3D printer. Hope it can help to organize yours as well.Dimensions:L:171mm x W:20mm x H:24mmUPDATE

Yet another add-on to your cable management solution.PROS:Cable is easy to insert/removeSuper lightweightDurableFast, easy to printHolds your cable in roll.CONS:NoneMedium size is good for standard 1m USB cable.Try it, it takes 6g of plastic and 15 min to try.I'd be happy to see your to see your prints. Boost MeModels like this requires lots of filament for testing model. Please, support me with Boost, so I can create more models. Thank you!

This **cable organizer** is a handy thing I designed to clear the mess of iPhone, Nintendo Switch, Apple Watch and any other charging cables and also to fit our living room. You can print it with **two different filament colors** to match your room decoration. It's a simple mechanism: just turn the inside wheel to bloc the cable. **Several models are provided** for 1 to 6 charging cables. Max cable diameter is 6 millimeters. You can use double sided foam tape to keep it in place on a desk…

Here's an awesome list of cool and useful things you can do with a 3D printer to upgrade your home.

Another cable organizer... Better use a large nozzle (Volcano + 1.0 or 1.2mm), or it will take ages to be printed ! | Download free and paid 3D printable STL files

Another cable clip! I designed this as I wanted to do a project with my son to use up the last bits of PLA left on our spools. It’s a simple design with a slight taper on the gap that prevents the cables from popping back out. Easily scalable to whatever size you require. If you like this model check out my Magnetic Cable Tidy. https://makerworld.com/en/models/803740#profileId-744023 As always, I would love to see pictures of your prints.

Tired of cables hanging all over the place? Turn your cable problem into an organized spot so that you can easily access the wires necessary. This 3D Printed Cable Organizer Clip is the perfect print to organize your cables with a built-in open and close mechanism. This print also allows you to mount your cables onto your desk so while making it easily removable for on the go use. This print takes less than 20 minutes to print and less than 10G of filament! (This is based off BambuLabs X1C…

This is basically a remix of Papos98 Cable hanger which can be printed all in one go with the hinge mechanism as a print in place. The main difference is that this is optimized to be able to be placed below a table where the one Papos98 has a hard time because of the fact that the weight of the cables opens the tie.With this cable hanger you can hang as many cables as it can fit and the clip does not open.Only 19g of PLA!!

I recommend to print this model with 0.1mm layer height or low if u can this will reduce stairs effect I print this one with 0.4mm nozzle and 0.25mm layer height (that's too much) It's perfect for usb cables

As someone who uses multiple gadgets and therefore carries several cords with me at all times, the chances of these cords tangling themselves with each other an