Bike trailer hitch

Simple No-Weld Bike Trailer: As with all good instructables, this one was born out of necessity. I needed to get a bunch of stuff from point A to point B. I am a scavenger so I needed a bike and trailer to get me around to garage sales, curb alerts, landfills, dump…

Bike Trailer Hitch: For a while now I have been looking for a bike trailer hitch that would allow full movement by the trailer in both the vertical and side to side lateral directions. I wanted something that would allow for the trailer to hit bumps, without it affecti…

No Weld, Lightweight, Foldable Urban Bike Trailer: This cargo trailer is super easy to make, requiring no welding, just using nuts and bolts to put things together.The inspiration for this DIY project is the wonderful Burley Travoy, an urban bike trailer that doubles as a hand truck -- very useful f…

Bicycle Trailer Hitch - Quick Release Hose Coupling.: I saw this design on a folding bike and thought it awesome. I used to hitch my bike trailers with a lashed inner tube, but this is faster and more convenient. Works very nicely.

Easy Bike Trailer Hitch: Don't feel like messing with air hose couplings to make your next trailer hitch? Want to allow anyone to take your trailer with out special hitches or hardware? Then this trailer hitch is for you! This is another installment of the No-Weld Bike Tra…

Single Wheeled Bike Trailer: Tired of bumbling along single track trails with two tires on your trailer fighting for the track? Too full of pride to plunk down the dough for a store-bought one? Never again. With this instructable, you'll be the envy of the trail.I built this…

Nomad bicycle camper - Elkinsdiy

Bike Trailer Hitch: This is a very cheap Hitch made with a swivel caster, a bracket for antenna poles and a piece of square iron pipe. To be fixed under the bike saddle. Great just because it allows the movement on three axes, so there's complete freedom while bi…

Utility Cycling - Trailer Construction Tips - I have a rather specific question. I'm building another trailer, but this one will have suspension for each wheel. I've been looking for a suitable (cheap) shock absorber for the purpose. something with a spring and damping. Ideally not more than 8inches long. Stroke of

Im trying to make my own ideas has any made one any ideas?