Tin Man Miniatures Princess Livia

Presenting her royal highness, Princess Livia from Tin Man Miniatures. Tin Man Miniatures is best known for producing 28mm-32mm scale figures based on the Barsoom planetary romance series written by Edgar Rice Burroughs. This is the non-"A" version of the figure. The "A" version represents the same character, but wearing less than what is seen here.

Extraterrestrial beach attire.

Figures representing women clad more in concept than reality don't regularly feature on this blog, but this one has been in my unpainted pile for more than long enough. I picked her out of the pile since I was in a swords and sorcery mood after an involuntary month long break. Although "sword and planet" might be a better description here.

My first attempt ended with Livia taking a bath in Simple Green. I tried out a different spray primer and found that it went on too thick and obscured the finer details. Then the nozzle broke and I threw out the can. Worse, I didn't like how the paint scheme I picked out - pale skin and gold metallics - blended together.

Sometimes a fresh start is the best option. Besides, I need more practice with painting flesh tones. This wasn't the end of the challenges I ran into with this project, though.


Preparation

This figure required nothing other than the warm soap and water cleaning I give to all of my miniatures as a first step. I wasn't able to find any mold lines or flash.


Base Assembly

I decided that the small integral base is not fit for the purpose of keeping the figure standing upright. My solution is the same one I use for Reaper Bones miniatures - gluing the figure on a steel fender washer.


Color Scheme

I opted to paint this figure as a human rather than a Red Martian. No offense intended to Edgar Rice Burroughs, but I felt that I would get more utility out of a swords and sorcery appearance for this figure.

The warm colors of the figure's skin and hair contrast with the cold metallics of the figure's outfit and jewelry. The small amount of blue cloth continues the warm/cold contrast.

Hair flowing in the winds of an alien desert.

Spray Primer

Tamiya Surface Primer (L) Gray
Tamiya Surface Primer (L) White

Sprayed in a zenithal pattern. This worked much better for preserving the details of the model.


Skin

Reaper 09041 Dark Skin
Reaper 09221 Olive Skin
Reaper 09260 Bronzed Skin
Secret Weapon W005 Flesh Wash

I built up a tanned appearance from the Dark Skin base layer to the Bronzed Skin highlights. All of these paints work well as various skin tones. The wash added surprisingly little and I'll skip it the next time I use this recipe.


Hair

Reaper 09221 Olive Skin
Reaper 09257 Blond Hair
Secret Weapon W005 Flesh Wash

Using Olive Skin as a base layer meant one less paint bottle to dig around for. The wash was much more useful here, bringing out the flowing hair sculpted on the figure.


Metal

Citadel Colour Codex Grey
Citadel Colour Boltgun Metal
Citadel Colour Mithril Silver
Formula P3 Armor Wash

Metallic paints don't always coat well, so I started with a non-metallic base layer. Even applied as a highlight, the Mithril Silver overwhelmed the layers it was sitting on. The wash toned down the shine and brought back the details of the metallic areas.


Cloth

Reaper 09017 True Blue

Basing

The basing material is my usual mix of sand with water, PVA glue, and FolkArt 231 Real Brown to fix it in place. Next came a dry brush of FolkArt 420 Linen to give the surface a drier, sandy appearance. I used Citadel Colour Chaos Black for the rim and - judging by the photos - I'll need to touch it up.

The base still needs a little work, but good results overall.

The initial set of photos I took of this miniature revealed all of the flaws in my paint job. This wasn't the first time I ran into this issue, but it was the first time it was bad enough for me to go back, fix things, and reshoot. Most of the flaws were with the cloth and skin tones. Also, it was at this point that I applied the wash to the metallic areas since the reflections were giving my camera fits.

This project turned out to be more of a challenge that I anticipated. This is not the fault of the figure, which is well sculpted and cast. An unplanned month off from painting left me a little out of practice. Perhaps something else might have been a better choice for a first project back. On the other hand, I did come out with new recipes for painting skin tones and metallics. Overall, I enjoyed the process of finding solutions for the problems I ran into and extracting a figure from the unpainted miniatures pile.

Bombshell Miniatures 36020 Science Officer Helen Salinger

Here's another 32mm pewter figure from Bombshell Miniatures. I'm pretty sure that Science Officer Helen Salinger is inspired by the lead character of a certain sci-fi franchise featuring hive creatures with parasitic life cycles and two sets of toothy smiles each. Note that I didn't follow up on the idea of a homage to that character when coming up with a paint scheme.

"Sign here."

There's more detail than I expected at first glance, particularly on the suit. The figure should fit into a variety of sci-fi settings. Although the pistol does have a "ray gun" appearance.

I used a mix of techniques on this figure. Some areas were painted in a darker base color with brushed on highlights. Others got my more usual approach of a lighter color darkened with a coat of wash. 

"I shouldn't need to ask you twice."

Priming
Zenithal spray priming using Tamiya Surface Primer L in Gray and White.

Skin Base Color
Reaper 09221 Olive Skin. I wanted to experiment with this color.

Skin Highlight Color
A mix of Reaper 09221 Olive Skin and Reaper 09047 Fair Skin.

Shirt Base Color
Reaper 09183 Cloud Pink. A bright color chosen to stand out from the rest of the scheme.

Shirt Highlight Color
A mix of Reaper 09183 Cloud Pink and Reaper 09281 Brains Pink.

Flight Suit Base Color
A mix of Reaper 09122 Terran Khaki and Reaper 09129 Faded Khaki. Terran Khaki resembles brand new khaki cloth while Faded Khaki is a darker color.

Flight Suit Highlight Color
Reaper 09122 Terran Khaki.

Hair Base Color
Reaper 09088 Stormy Grey.

Hair Wash Color
Diluted Citadel Colour Chaos Black allowed to flow into the recesses and darken the overall tone.

Accessories Base Color
Reaper 09088 Stormy Grey.

Accessories Highlight Color
Citadel Colour Codex Grey. Also applied to the screen of the tablet computer.

Accessories Wash Colors
Secret Weapon W001 Soft Body Black Wash. Diluted Citadel Colour Chaos Black was also applied to the boots to darken them further.

Overall, I think the combination of approaches worked well on this figure. Some of the wash flowed out of the areas they were applied to. I was able to correct this, but I might choose one method or the other for specific projects in the future.

Bombshell Miniatures 36003 Wanda Whitestar

This 32mm scale pewter model is from Bombshell Miniatures and is part of their Counterblast line. Wanda Whitestar would work in a variety of sci-fi settings, but the retro hair style suggests that space opera might be the best fit.

With retro in mind, I decided on a paint scheme influenced by a piece of 1980s sci-fi. Specifically, the Buck Rogers in the 25th Century television series. Many of the costumes worn by Erin Gray as Colonel Wilma Deering were shiny, brightly colored, and form fitting. I picked the pink one as my inspiration.

Preparation
There was no discernible flash or mold lines. I glued the figure to a 30mm round plastic base, being careful to leave a little room between the base surface and the miniature's feet. This space would later be filled by the sand I used for texturing the base.

Zenithal Spray Priming
Tamiya Surface Primer L in Gray and White. This was less for the zenithal priming to show through and more so that I could have a guide for shading later on.

Skin Base Color Coat
A mix of Reaper 09047 Fair Skin and Reaper 09233 Bright Skin. Bright Skin resembles no natural human skin tone I've ever encountered. It works well for non-human flesh, though. In this case, I mixed it with Fair Skin to produce a slightly darker color.

Skin Highlight
Reaper 09047 Fair Skin.

Hair Base Color Coat
Mix of Reaper 09122 Terrain Khaki and Reaper 09139 Faded Khaki. This produces a color that works for dark blonde hair or light tan clothing.

Hair Highlight
Reaper 09257 Blond Hair.

Body Suit Base Color Coat
Reaper 09163 Cloud Pink. This is a medium tone pink.

Body Suit Highlight
Mix of Reaper 09281 Brains Pink and Reaper 09163 Cloud Pink. This produced a cotton candy pink.

Body Suit Wash Coat
The results of the base and highlight were brighter than I liked and the recessed details weren't as clearly visible as I wanted. I applied a light coat of Secret Weapon W025 Just Red Wash to darken down the color and bring out the details.

Jacket and Accessories Base Color Coat
Reaper 09088 Stormy Grey.

Jacket and Accessories Highlight
Citadel Colour Codex Grey.

Jacket and Accessories Wash Coats
Diluted Citadel Colour Chaos Black on the boots, gloves, and weapons to create a subtle difference in shade between them and the jacket. I followed up with a coat of Secret Weapon W001 Soft Body Black over the jacket and areas previously coated with Chaos Black.

Basing
Mix of sand, tacky glue, brown craft paint, and water in the recessed portion of the base. I painted the edge of the base with Citadel Colour Chaos Black.

Overall, I'm happy with how this one turned out. Although I am still debating the merits of hitting the hair and skin with a wash. It would bring out more of the details, but I don't want to change the colors as they are now.

Bombshell Miniatures Bug Spray

This is "Bug Spray" from Bombshell Miniatures, based on artwork by Matt Dixon. This 32mm scale miniature was introduced as part of Bombshell's "Babes" Kickstarter back in 2012. It is no longer available for purchase from Bombshell Miniatures.

"Bug Spray" going to work.

"Bug Spray" seems to draw from a variety of genre sources. Sigourney Weaver's Ellen Ripley - particularly her depiction in Aliens - may have been the inspiration. The clothes would not be out of place on Tomb Raider's Lara Croft. And the purple hair (as seen on the original artwork) reminds me of Leela from Futurama.

Painting this figure is part of an ongoing effort to complete the out of production products in my collection. I also wanted a straightforward miniature painting project - no hydrophobic plastic to deal with or parts to assemble. This was also a chance to try out a couple of the Secret Weapon washes I picked up awhile back.

Skin
Reaper 09044 Tanned Skin. A clean, even layer was important to provide a foundation for the later wash layer.

Hair
My initial approach was a base layer of Reaper 09025 Burgundy Wine with Reaper 09024 Amethyst Purple applied as highlight. The results were disappointing. There was too much contrast between the two layers. I applied some watered down 09025 Burgundy Wine to better blend the two colors and darken the overall appearance of the hair. Next time I decide to try for purple hair, I might try reversing the initial process - using 09024 Amethyst Purple with some thinned down 09025 Burgundy Wine as a wash.

I'm not sure if the weapon is supposed to be a flame thrower, a plasma projector, or just a BFG.

Shorts
I went with a clean layer of Reaper 09158 Olive Drab and relying on the wash for shading and details.

Top
Reaper 09074 Palomino Gold with 09009 Lemon Yellow for highlighting. There was a strong contrast between the layers, but I knew that the wash I planned on applying later would bring it down.

Leather Accessories
The boots, gloves, and belt all got a clean coat of Reaper 09284 Lonestar Leather. It is a good color for relatively new leather. I would normally apply another color for a more weathered appearance, but I wanted to see what the wash layer would do.

Band Aid
Preserving this detail from the original artwork was a nice touch on Bombshell Miniature's part. Reaper 09233 Bright Skin is too pink to be useful as a skin tone, but works fine for a plastic adhesive bandage.

Weapon
I dipped into my last bottles of old Citadel Colour metallics for this part. Boltgun for the body. Tin Bitz for some of the details with Shining Gold as a highlight. Again, I was relying on the wash layer to bring things together.

Note the adhesive bandage on the right knee. A nice touch on the sculpt!

Weapon - Wash Layer
Secret Weapon W003 Armor Wash. The black-brown brings out the details and gives the weapon a used look.

Almost Everything Else - Wash Layer
Everything except the weapon, the hair, and the adhesive bandage got a layer of Secret Weapon W005 Flesh Wash. Secret Weapon calls it a "medium orange/brown tint" on their website. The tint turned out darker than I expected, but the dirty look fits the figure. The wash works well with the Reaper 09044 Tanned Skin to produce a sun-kissed tone. There is a shine that I initially found a little annoying, but I realized that it helps sell the idea of sweaty and exhausted woman who is having a bad day.