Metal casting

Melt Down Your Aluminum Cans: People that make metalworking and metal casting their main hobby are going to find many things wrong with what I am showing you here. Ignore most of that and give this a try even if it comes out crappy. This is a low investment way to observe a lost…

Melting Points of Various Metals

Lost Foam Casting: In this project, I'll be showing a simple way to cast a raw model, of your desire, called "lost foam casting".Lost foam casting is based on styrofoam, as the material for your model. As an example, i'm going to make a small copy, of the instructable…

How to Cast Small Metal and Rubber Parts (2nd Edition)

Artisan, the last word for luxury http://www.elizabethmachinpr.com/blog/-artisan-the-last-word-for-luxury

Learn how to do brass casting with sand cores. A good skill to learn to cast pieces that are no longer obtainable. #Instructables #outdoors #workshop #metalworking #motorcycle

Dezeen Book of Ideas: Pewter Stool by Max Lamb

from wax to metal 🕯️ crafted from recycled sterling silver using the ancient lost wax casting process, each piece starts from a block of wax that i carve, melt and engrave before sending it off to get cast into metal. all of these one off beauties are still available & looking for their forever homes!

Jewelry casting is a process of making jewelry pieces that involves the pouring of liquid metal alloy into a mold. It is usually referred to as lost-wax casting because the casting mold is created using a wax model that is melted away to...

Pewter Casting: Pewter casting is easy and you probably already have most of the things you need to try it out. There are lots of ways to cast pewter, I'll be talking about three ways: using foundry casting sand, using silicone molds, and using cuttlebone. This Ins…

Katie Morgan | Silversmith on Instagram: "I tried sand casting for the first time, I love the process and the instant results even though the final result wasn’t quite perfect. I’m going to keep practising and making slight adjustments to the process until I can get the perfect final result."

Undercut is a concept furniture project that blends two materials - Mahogany wood and cast aluminum - to create new furniture fashion without using any connectors or additives.