3d printed moss pole

3D Printed Voronoi Moss Pole: Some plants need a little extra support, and a moss pole can be a great way to provide that. Moss poles can be expensive, but 3D printing and making your own can significantly reduce the cost and allow you to customize it to your decor and your plan…

Download this STL Model for 3D printer made by haplostreams. Indoor gardeners rely on moss poles to recreate the natural conditions that climbing plants thrive in, providing crucial vertical support to prevent them from buckling under their own weight as they grow upwards. But why settle for ordinary moss poles when you can upgrade to this modular, stackable wonder? Not only does it offer the essential support your climbing indoor plants need, but it also adds a stylish touch to your indoor…

Download this STL Model for made by Anaran. This Ten-edged Moss Tower provides support for plants as an alternative to regular moss towers or coconut poles. It is suitable for Monstera, Epipremnum, Philodendron, Pothos and other climbing plants. Keep adding sections as your plants grow. For high poles, it is recommended to add a pvc pipe inside for more stability and it can also be good to tie the tower to the pot with steel wire. You can mix and match the different modules to personalize…

This modular, stackable self-watering moss pole totem provides support for climbing indoor plants as a beautiful alternative to traditional moss poles. Suitable for monstera, philodendron, pothos, and more. Add sections as your plants grow, and keep the moss watered with an easy-to-use Watering Tow

Download this STL Model for made by Dezhe. I was asked to design one. With a deep base that wont cut up all the roots on the way in. And here it is. With three depths available for the spike [2.5"/3.5"/5"], 4" and 7" sections and a cap.

The self watering planter and moss pole combo is up here too!

Your climbing plants deserve better than a wobbly stake. My 3D-printed moss poles are built to grow with your plants—just screw on another section when they need more height. Plus, the built-in slow-release watering system keeps moss damp for longer, so your plants get the humidity they crave. ✔️ Stackable design ✔️ Self-watering feature ✔️ Stable spike for support ✔️ Sleek, clean finish No more misting your moss pole every five minutes—this one’s got you covered. Grab yours now through…

Download this STL Model for made by gre66temp. New addition to my moss pole range. Not printed yet but should be fine, use Brim and normal PLA settings.

This modular, stackable self-watering 3D printable moss pole totem provides support for climbing indoor plants as a beautiful alternative to traditional moss poles. Suitable for monstera, philodendron, pothos, and more. Add sections as your plants grow, and keep the moss watered with an easy-to-use

Your climbing plants deserve better than a wobbly stake. My 3D-printed moss poles are built to grow with your plants—just screw on another section when they need more height. Plus, the built-in slow-release watering system keeps moss damp for longer, so your plants get the humidity they crave. ✔️ Stackable design ✔️ Self-watering feature ✔️ Stable spike for support ✔️ Sleek, clean finish No more misting your moss pole every five minutes—this one’s got you covered. Grab yours now through…

Discover how neilgates 3D-printed Gothic Tower Stackable Self-Watering Moss Pole. Download the 3D file, ready for 3D printing. Explore the print settings and admire real photos of the final result. I used the towers and also combined the tops to create my paludarium rebuild! I printed a few sections of the tower on my I-mates s printer for an actual moss pole, but in the meantime my paludarium sprung a leak. So, I used the pieces I already made and used them in the rebuild instead. I…

Your climbing plants deserve better than a wobbly stake. My 3D-printed moss poles are built to grow with your plants—just screw on another section when they need more height. Plus, the built-in slow-release watering system keeps moss damp for longer, so your plants get the humidity they crave. ✔️ Stackable design ✔️ Self-watering feature ✔️ Stable spike for support ✔️ Sleek, clean finish No more misting your moss pole every five minutes—this one’s got you covered. Grab yours now through…

🌻 Elegant Sunflower trellis for indoor houseplants 🌻 🌻 Handcrafted espresso brown and gold alcohol ink mirror center, uniquely designed by a young painter 🌻 One-of-a-kind design, perfect for small pothos vines or Hoya houseplants 🌻 10% of each sale donated to Heart of Missouri CASA (youth foster care advocacy) 🌻 Made in Columbia, Missouri, using high-quality, earth tone, plant fiber bioplastics 🌻 Support plants and children in need with this trellis 🌻 Each handmade flower center will…

I've been seeing a lot of people talking about the shortcomings of their moss poles—hard to fill, won't stay standing, won't stay moist. At Leafprints.3d, we aim to solve those problems! 🌿✨ Introducing our upcoming magnetic self-watering planters with a built-in shelf for a moss pole. Run a wick through the bottom of the planter and up the moss pole, keeping it perfectly watered for your climbing plants! 🌱💧 The best part? You can use the same cap to run a wick through our moss pole with…

Download this STL Model for made by spamstuffhereplease. Small moss pole. 2.5in dia. 6in height

A moss pole is not just about looking good, it's about creating a healthy growth environment for your plant. Moss poles provide vital support for climbing and vining plants while boosting humidity levels and promoting root health and maturity. They can also be channels to provide your plants with nutrients.