3d print cable management

3D Printed Cable Management SpineMany Standing desks suffer from poor cable management due to all the cables having to be twice as long to support the

整理宜家洞洞板上的USB线缆。小尺寸的可以穿过6mm以下线缆，大尺寸的则为8mm。Organize USB cable on Skadis board.smaller size for cable under 6mm.bigger size for cable under 8mm.

Cable Management - Clockwerk Industries

Hi Everyone, I was so tired of seeing my charging cables laying all over the floor so I wanted to design a little simple cable management holder. I used 3M Command mounting strips to secure the holder to the back of my dresser. Now I just grab the cable I need, charge my device and put the cable back into its holder. My wife liked mine so I printed one for her as well. Hope you like it. | Download free and paid 3D printable STL files

Parts for cable management under a desk. They are screwed to the desk and use tie wraps to fasten the cables.Added 4,5 and 6 Cable holders.Added Samsu

Another cable clip! I designed this as I wanted to do a project with my son to use up the last bits of PLA left on our spools. It’s a simple design with a slight taper on the gap that prevents the cables from popping back out. Easily scalable to whatever size you require. If you like this model check out my Magnetic Cable Tidy. https://makerworld.com/en/models/803740#profileId-744023 As always, I would love to see pictures of your prints.

Created a simple design to organize the cables of my 3D printer. Hope it can help to organize yours as well.Dimensions:L:171mm x W:20mm x H:24mmUPDATES: 06/03/2021Added a version where the organizer can be cut to different sizes.

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size. After printing, you'll want to place the cable within the groove at its halfway point, close the lid…

If you could support my YouTube channel that would be awesome :)!Or leave a LIKE and comment on the video would really help!https://bit.ly/SubscribeTo

The model has been upgraded structurally based on the model I previously uploaded (see figure below), eliminating the need for double-sided tape. By tightening the bolts appropriately, it can be fixed relative to the edge of the table, making it easier to store and apply data cables.The 5-pole cable clamp version this time is almost compatible with all mobile phone data cables. Among the 5 data cable holes, 2 have a diameter of 5.5mm (suitable for thicker fast charging data cables) and 3…

Download this 3D Model for 3D printer made by Makeit3d. Tired of cables hanging all over the place? Turn your cable problem into an organized spot so that you can easily access the wires necessary. This 3D Printed Cable Organizer Clip is the perfect print to organize your cables with a built-in open and close mechanism. This print also allows you to mount your cables onto your desk so while making it easily removable for on the go use. This print takes less than 20 minutes to print and less…

Cable organizer under the desk. On one side is an area for thick cables, and on the other - for thinner ones.

The Cable Winder is a sleek and functional solution to keep your cables neat and tangle-free. Designed with a compact and ergonomic shape, it easily fits into bags, drawers, or your workspace. Ideal for managing charging cables, earphones, or any other cords you want to keep organised.Features:Compact Design: Space-saving spherical shape for easy portability.Tangle-Free Storage: Keeps cables neatly wound and protected from damage.Durable Construction: 3D-printed with robust, lightweight…

Another cable organizer... Better use a large nozzle (Volcano + 1.0 or 1.2mm), or it will take ages to be printed ! | Download free and paid 3D printable STL files

DescriptionA box designed specifically for storing cables. You can choose from one of three sizes. It has a lightweight design and requires only 65g to 85g of plastic to print depending on the size. I recommend using PETG or PLA+ for better durability. The extended container's edge prevents cables from slipping out.The box's dimensions are:- 9 compartments - 172mm x 81mm x 60mm- 10 compartments - 201mm x 81mm x 60mm- 12 compartments - 241mm x 81mm x 60mmIf you are looking for a box…

I made this one inspired by several other solutions. It is designed so it should be possible to print on my LulzBot mini.There are three versions. The

Joseph Willis on Instagram: "The Clean Cable Caddy for the Apple USB-C 1 Meter Cable So this started off as a little side project where I was trying to create something that solves one of the big issues I have with most cable management systems: there’s always those free ends of the cable that tend to never be accounted for in a pleasing way. Here’s what I came up with: 1. Initially, I borrowed the design from the Brick Bud design to hold one end of the cable. I quickly realized that it…