Open Source Linux Battery Monitoring Software

Apcupsd is a program for monitoring UPSes and performing a graceful computer shutdown in the event of a power failure. It runs on Linux, Mac OS/X, Win32, BSD, Solaris, and other OSes.

sispmctl is an application enabling the use of the GEMBIRD SiS-PM and mSiS(sispm) USB-controlled power-outlet device under Linux. Note that the device is also sold under different Names, i.e. as "IntelliPlug" in Germany.

O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl. Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/ Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto. Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações. Modelos suportados: 1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB 2) BACK-UPS BR 1500VA (BZ1500PBI-BR e BZ1500BI-BR) 3) BACK-UPS BR 2200VA (BZ2200BI-BR e BZ2200I-BR) 4) SMART-UPS BR 1000VA (SUA1000BI-BR e SOLIS1000BI) 5) SMART-UPS BR 1500VA (SUA1500BI-BR e SOLIS1500BI) 6) SMART-UPS BR 2000VA (SUA2000BI-BR) 7) SMART-UPS BR 3000VA (SUA3000BI-BR) Para entrar em contato, utilize lo formulário no site http://www.apcctrl.com.br

Hardware Visualizer is a lightweight and open-source tool for monitoring your hardware. It lets you track CPU, GPU, memory usage, and more with minimal system impact. Hardware Visualizer is an interactive visualization tool designed to map and display computer hardware components in real time. It helps users understand their system architecture through dynamic 3D or schematic views of components such as CPU, GPU, RAM, storage, and peripherals. Ideal for both enthusiasts and IT professionals, HardwareVisualizer provides insight into hardware performance, compatibility, and connectivity. With support for live monitoring, customizable themes, and exportable reports, it simplifies hardware diagnostics and documentation. Whether you're building a PC or managing enterprise systems, HardwareVisualizer turns complex configurations into intuitive visual layouts.

This application (a couple of PHP-scripts) allows webusers to wake up WOL-enabled remote hosts.

This is a small program that reads and writes the WakeUp time in the BIOS. This is done via /dev/nvram on recent kernels (>2.4.6, including 2.6.x) or, alternatively, via direct ISA access. On this WakeUp time the computer is powered on automatically.

gapcmon is a gtk/glib desktop monitor program for the apcupsd package. apcupsd interfaces with UPS power systems on local or networked systems. gapcmon connects to apcupsd via the NIS api to collect and displays the current operational state of the U

Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.

An opensource replacement for the Commander Pro software available for download from http://www.ups-software-download.com This works with the no-name UPS available from Dick Smith in Australia, and probably others that use this software As of 12-12-2008,

A simple yet powerful Power Daemon (powerd) to monitor an Uninteruptable Power Supply (UPS) with the additional capabilities of notifying remote hosts that may not have a way of knowing if their power is off.

This project has moved to GitHub, at https://github.com/deragon/autopoweroff/ Autopoweroff is a daemon for the Linux operating system that shuts down the server or run any other command at a specific time if no other workstations on the LAN requires it services or if any user is working on it . A GUI is provided for configuration. Useful for home servers.

DPM explores technologies to improve power management, with a focus on techniques applicable to running systems, adjusting power parameters on-the-fly in order to save power during brief idle periods or execution of tasks with lower power demands.

MultiWOL is a Perl CGI script for power up computers remotely that designed with multiuser environment in mind. MultiWOL offers capability of waking up multiple hosts simultaneously with automatic check that remote host has or may has not awoken.

Waik is a useful system utility for power management of your PC. It is written for Windows, and it features automatic stand by mode, shutdown, and even waking up from sleeping(stand by) mode at the set by you time!

apcupsdJcfg is written as a front-end companion to the program apcupsd. It is a gui front-end used to easily create the apcupsd.conf config file so the users do not have to manually edit the file with a text editor.

Conext Battery Backup UPS power daemon. cpowerd monitors power status of the Conext UPS. It can detect a power failure and shutdown the system safely or cancel shutdown when power is restored. Low battery alarm is not implemented yet.

A UPS monitor daemon for the CyberPower 320 SL UPS which allows you to specify any serial port to watch or any shutdown script you would like to occur. It is very compact and easily used.

Simple CGI viewer for CyberPower UPS PowerPanel commands on *NIX. Written in perl; uses POSIX, CGI, CGI::Carp. Single cgi file in download, to be used in conjunction with CyberPower's powerpanel utility.

The goal of EnerWare is to design and create language primitives and/or extensions that enable the support and provision for energy awareness in resource-constrained systems such as embedded sensors and large-scale servers.

Simple UPS monitoring plugin for GKrellM. Uses NUT (Network UPS Tools) for UPS connection. Based on "GKrellM Belkin UPS Plugin".

gpmudmon is a battery monitor for Linux PPC similar to Batmon but running as a Gnome applet. It displays the current charge of the battery and whether your Powerbook is connected to the power supply or not. It also has an optional gauge to show the curren

Genpower is a daemon that monitors the state of an uninterrupted power supply device (UPS) through an RS232 serial interface, and takes action according to the state of the UPS. A variety of device and cables are supported.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

Home Server Power Manager is a lightweight utility to allow suspending server machines when they are inactive for a certain period of time. This program allows you to automatically suspends home servers (i.e. headless servers used for file sharing, file printing, etc) when no clients are connected for a certain time (15 min) and when they do not have other tasks to complete. The program is composed of modules to monitor different tasks, as file sharing, printing, music playing, in order to decide if the machine shall be suspended. More details can be found in the wiki of the project.

A laptop battery meter for the KDE panel. KBatt can display current power status (AC online, offline), battery level, as well as remaining time.