If I start my computer with the USB 3 device connected and powered on the USB 3 functionality seems to work. If the device is off when the computer starts the USB 3 functionality does not appear to work.
I have same problem in my computer, with usb 3.0. It is powered ok With a connected a device before booting the OS. If i plug the device later i can't get it to work any device, i have -gux_defer_usb2 guy_no_idle.
It's something relating powering . I have a renesas/nec usb 3.0 upd720200.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
View and moderate all "tickets Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Tickets"
I have same problem in my computer, with usb 3.0. It is powered ok With a connected a device before booting the OS. If i plug the device later i can't get it to work any device, i have -gux_defer_usb2 guy_no_idle.
It's something relating powering . I have a renesas/nec usb 3.0 upd720200.
View and moderate all "tickets Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Tickets"
Yeah,I have the same problem too,hope to be resolved,thanks!!!