Menu

Commit [r271]  Maximize  Restore  History

Some bugs solved. The undesired behaviors are listed below, and were fixed.

1- At latitude zero, inverted altitude (all mount types).
2- In manual mounts and "Return on end", again and at some circumstances (not solved in V5.1.1.269, including rounding floating-point errors), invalidate PEC recording and does not record the PEC file at end of PEC (NPEC) cycle.
3- When parking, the PEC trackbar returns faster than RA trackbar.
4- If park button is pressed during pulseguiding or manual guiding, it "memorizes" the guiding speed and start moving at this speed after parking, on manual mounts.
5- At some circumstances the PEC recording does not start, even starting at sidereal speed from park position, on manual mounts.
6- Position locked (does not start) after return to park position using left arrow, on manual mounts.
7- Accepts park position below horizon on manual mounts. Move to this park position, and then unpark, moving to nearest point above horizon.

macielbassp 2014-10-20

changed /V5/ENG.LNG
changed /V5/PTB.LNG
changed /V5/source/SStepper_Aux.pas
changed /V5/source/SStepper_FGoToRaDec.pas
changed /V5/source/SStepper_Form1.pas
changed /V5/source/SStepper_GenericMotor.pas
changed /V5/source/SStepper_Telescope.pas
changed /V5/source/soundstepper.dof
changed /V5/source/soundstepper.res
/V5/ENG.LNG Diff Switch to side-by-side view
Loading...
/V5/PTB.LNG Diff Switch to side-by-side view
Loading...
/V5/source/SStepper_Aux.pas Diff Switch to side-by-side view
Loading...
/V5/source/SStepper_FGoToRaDec.pas Diff Switch to side-by-side view
Loading...
/V5/source/SStepper_Form1.pas Diff Switch to side-by-side view
Loading...
/V5/source/SStepper_GenericMotor.pas Diff Switch to side-by-side view
Loading...
/V5/source/SStepper_Telescope.pas Diff Switch to side-by-side view
Loading...
/V5/source/soundstepper.dof Diff Switch to side-by-side view
Loading...
/V5/source/soundstepper.res
Binary file was changed.
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.