Showing posts with label SAGA. Show all posts
Showing posts with label SAGA. Show all posts

Wednesday, 20 October 2021

10 Months! Really?!?! Elves and more Elves

Good grief. 10 whole months without a post is pretty slack to say the least!

I could blame all sorts of things but the answer really is basically just laziness. I love painting and modelling, but no so much spending time on the PC posting stuff. That's got a lot to do with my day job being entirely spent in front of screens too.

Still, the point of the blog is to, well... blog stuff. So here you go, here's a chunk of new painted stuff - Oathmark plastic Elves, kitbashed to some extent with Gripping Beast Arab Cavalry (there are no Oathmark Elf Cavalry... yet) and WFB Elf shields.

Firstly, all the "Wood Elves", plus some scratch built way stones.


Frostgave female wizard masquerading as an Elven Wizardess

Mounted rangers

Dismounted rangers and command


And now the "High Elves"...





These two forces are part of a larger SAGA fantasy project I have going on. More of that sooner rather than later!

Cheers,
Millsy


Tuesday, 6 October 2020

Old Dog Learns New (Terrain) Tricks - Part the Last (At Last)

My modest terrain project has been languishing in obscurity for the last three months while real life does its damndest to upset my personal applecart, but I'm going to draw a line under the blasted thing and blog it.

OK, the last we saw of the piece, it was awaiting paint and groundwork. The plaster rocks had been hot glued into place, the gaps filled with Sculptamold, and the MDF base smoothed over with more of that excellent product.


Painting was next, using the "leopard-spotting" technique I picked up from Mel the Terrain Tutor and Luke at Geek Gaming Scenics (both channels are an absolute must for aspiring scenery builders). No, it doesn't mean taking a pair of binoculars out on the savannah. It's a technique for painting rocky surfaces more realistically than the old "three shades of grey plus a drybrush" that many of us cut our terrain painting teeth on.

I splashed a thin wash of yellow ochre acrylic (the cheap stuff from the $2 shop) over about a third of the rock faces and ruins, following that with burnt sienna and umber in similar quantities. These soak into the plaster and give a realistic mottled effect. Leaving some of the plaster in its natural white will give some nice contrasts for the final wash.

Once dry, a thin wash of black is applied over all. Have plenty of paper towel ready to soak up the excess. The flatter areas were going to be flocked, so I painted them in basic burnt sienna to prevent any white plaster showing through.

I used foam flocks for the ground covers, spraying with diluted PVA glue as I went to build up layers of progressively lighter-coloured flock. I'd never worked with foam flocks prior to this, but I was delighted to find that once they're dry, they harden up a treat, providing a realistically textured surface without sacrificing durability. 

Most of the work was done down in the garage out of consideration for the cleanliness of our kitchen, so I didn't end up documenting the whole process step by step, but I can at least share pics of the finished product.


The slopes of the hill and flat areas are finished with assorted foam flocks, plus Tajima's wild grass tufts and Moorland diorama effects. More tufts were placed in recesses in the rock faces. Small rocks, twigs, and sand were scattered around and hit with liquid super glue to fix them immediately in place.




More offcuts from my mother-in-law's garden were pressed into service to make a dead tree, because this tower has been a ruin for a long time. This was painted with GW Dryad Bark and drybrushed with GW Gorthor Brown and a light dusting of Vallejo Game Colour Cold Grey. Geek Gaming Scenics Forest Floor flock was scattered around the tower's interior.


Add a few tufts growing out from between the stones, and a raven perched in the tree (courtesy of the Warhammer Giant kit, the best source of fantasy set dressing materials for my money) and voila, it's done!



So what lessons have I taken away from this? 

Firstly, Sculptamold doesn't take up the washes used in the leopard-spotting technique as readily as plain plaster, so use it sparingly when building rocky surfaces. It's best as a simple gap filler in this situation. I used a bit too much on this piece and had to go over the affected areas a couple of times to ensure coverage.

Be sure to mop up excess washes quickly - MDF REALLY doesn't like to get wet.

When spraying diluted PVA from a spray bottle, sooner or later you'll get blockages. A squeeze bottle with a fine nozzle can do just as well when wetting down flocked surfaces. It can be messy, but as I said above, keep plenty of paper towels on hand and you should be right.

Working with washes and successive sprays of PVA glue means a fair bit of waiting time between steps, and the completed piece can take a while to dry, so patience is a virtue.

I'm quite pleased with the results, and this little project has definitely given me some more ideas to go on with. Considerations of space probably mean that I won't be building any huge modular gaming tables in the near future, but if ever I get a shed, watch out!

What's next? Maybe some more Frostgrave, or maybe a detour to the Bronze Age?

Stay tuned...

Ev

Sunday, 28 June 2020

Old Dog Learns New (Terrain) Tricks - Part the First

It all started innocently enough.

Like so many of us in lockdown, my e-commerce activity has shown a bit of a spike lately. 150 or so MDF rounds from Warbases, some assorted Hellenistic figs from Warlord and Polemarch, and this thingy below;



It's a textured roller from Green Stuff World, and it has opened a veritable tin of terrain worms here at Chez Ev.

Of course, I had to test it out straight away, so it was off to the shops for a pound of Das air-drying clay. Grabbed a cardboard tube from the stash in the garage, rolled out a couple of sheets of the Das with the brickwork roller, stuck it to the tube with PVA glue, and left it to dry. This last step took longer than anticipated. Like a week longer.

But here's the result;



That worked well, thinks I, but what am I going to do with it? Why, make a piece of SAGA or fantasy skirmish terrain, of course! I drag out a Warbases terrain base and get to work with some extruded polystyrene foam and the hot glue gun. Oh, did I not mention the new glue gun...?

"This is the DeWalt Ceramic Glue Gun, the most powerful hot glue gun in the world..."
So yeah, things were escalating quickly...

Adding to the mayhem, I started looking for hints and tips on building realistic rocky terrain, and stumbled upon some YouTube channels which were to prove my downfall; Boulder Creek RailroadThe Terrain Tutor and Luke's APS. I admit it. I was hooked. What these guys can't do with foam, plaster and glue isn't worth doing.

Several days and a few dozen hours of viewing later, I'd grabbed some Woodland Scenics Rock Moulds, some Sculptamold Modelling Compound, and went a little bit crazy.


The rocks were cast in plaster of Paris and hot-glued on and around the edges of the foam, and blended into the piece with Sculptamold. Sculptamold is a mix of shredded tissue paper and plaster of Paris. It dries as hard as plaster, but weighs less and can be sculpted as it dries. In retrospect, I'd probably use less of it in future and leave more of the plaster rocks exposed. You'll see why later.

So where is this going? Somewhere potentially quite expensive and with a very steep learning curve!

Stay tuned...

Ev

Friday, 4 January 2019

Goodbye 2018, Hello 2019

G'day All,

I'm a little late with my annual looking back / looking forward post this year because I've been on hols. It's something I enjoy though as I always find it motivating and it helps kick me into gear for the year ahead. Here we go...

This year has seen the Distractability Index at close to an all-time high and whilst that has got loads of stuff done, it means a LOT of it wasn't from Glorious Plan Millsy 2018 (or maybe it was?).

Focus! Focus damn you!!

The plan for 2018 consisted of three main goals...

1. Continuation of the 55 Days at Peking Project

This one stalled big time. Too much of a good thing proved to be a bit of a killer for the enthusiasm but I did still manage to knock out a unit of Japanese Infantry.


I also managed to get a couple of games in which was great fun.






On the plus side I jumped on the Warbases Boxer Rebellion Kickstarter and will be shortly receiving another 8 beautiful building kits in the post. Add those to the table plus a few unfinished items and it will really look the duck's nuts! Enthusiasm restored.



2. More Warhammer Fantasy Empire

Great progress with the Empire in 2018, largely thanks to the first Old World Army Challenge spurring me on. It's back again this year and I'll be continuing my Empire so there will be a lot more stuff completed in 2019.











3. Other Stuff Yet to be Decided

I hinted that SAGA Crusaders might make an appearance and they did. Well, the start of them anyway... The rest are prepped and will be appearing over the next few months in AHPC IX. I'm also tray basing as you can see for use in To the Strongest!




Now I mentioned earlier that the Distractability Index played a bit part in 2018 and here's proof...

Konflikt '47 United States Army

Unplanned and not even on the lead pile. One beer, a chat and suddenly I have a large (but painted!) US Army for Konflikt '47 and Bolt Action.









Kill Team

Another "where the hell did that come from" effort means I also have a Heretic Astartes Kill Team, the Half Dozen Second Cousins of Chaos...



Fantasy Skirmish Warband for Frostgrave

If Evan gets his finger out we might actually play a game one day...



And quite a few randoms as well...





For King and Parliament

Finally, Simon Miller's For King and Parliament got designed and laid out. It's proved a huge success and I'm absolutely stoked for him!


Glorious Plan Millsy 2019


Finish the SAGA Crusaders
Already started, fully prepped and I'm keen as mustard to get these done.

Konflikt '47 Germans
Yep, I bought another army. Double face palm.

To the Strongest Later Medieval
TWO armies for this, of which I already have approximately 60% of the material in the Cupboard of Shame - Burgundian Ordonnance and Italian Condottieri.

Warhammer Fantasy Empire
There's another 1000 points to be painted for OWAC II.

More Commission Design Work
I currently have another two projects on the go, both well advanced. One is for an existing client and the other a new one.

Plus goodness knows what else!

Happy New Year people. Looking forward to seeing all your stuff and welcoming you here in 2019.

Cheers,
Millsy

Related Posts Plugin for WordPress, Blogger...