Guest Posting at A Jennuine Life

I am guest posting over at A Jennuine Life! 

Go here to check it out and see what Jenn has been up to lately!!

I’m Guest Posting at A Jennuine Life Today!

Go check out my guest post on how to make wool felt…

at A Jennuine Life! 

See you there!

Sarah’s posting soon!

I have this sister named Sarah…

She is really crafty…but she always says I am the crafty one…

She is the middle girl of five, so she is that notorious middle child!  Well, except we also have three brothers.  Yep, that is a total of eight kids!

And yep, that’s a total of four all polyester leisure suits in that photo!  And you can’t tell but there are three (maybe four) maxi dresses! Trust me, they were in style then.  At least I hope they were because we were all wearing them then!

So Sarah and I exchange gifts every other months, must be handmade things…usually that we make for the other.  I have made lots of cool things, most of which you see here on my blog.  Sarah doesn’t really have a blog, but I have been encouraging her to start one.  She always says she doesn’t have time.   But she made this felted wool ball garland.

And these JOY blocks…

and these labels for my crafts…

And these wonderful mug mats for my desk at work….

And this really cute felted present for my tree…

And darling snowman magnet for the fridge…

And this soap holder for the shower…

And this package for Christmas last year…  Well, you get the idea, I guess…Sarah is very crafty and I am happy to announce she is going to be doing an occasional guest post here and there!  So, watch closely for the next post, which will be by Sarah!

Ribbon Organizer Tutorial

I made a few ribbon spool holders a few years ago...they didn't quite hold all my spools, but they were a help!  The pink one in the back is the new one I am going to show you how to make.
I have made ribbon organizers before, but they were too small or too wonky to work well. 

This is my pre organizer ribbon storage…yeah, not working so much!  The more I dug to find a color, the more I couldn’t find it!

And this is the after!  Six dowels all full of ribbon…

So, a few weekends ago I acquired about 50 more rolls of ribbon (major deal~~$5 for 50 rolls, plus some lace and rick rack, plus I donated a large quantity of trims and things I won’t use to Goodwill) and clearly needed more efficient storage. 

Since there are different sized rolls, I decided to make one to fit the larger ribbon rolls.

I found a board that was 4.25 inches wide and I cut it to 18.5 inches long.  I laid my large ribbon roll along the board and used a black marker to mark the hole in the center of the ribbon spool.

I just kept repeating until I was to the end of the board.  If you want actual measurements, the holes were 4.5 inches apart and the first and last holes were 2.5 inches from the end of the board.

Then I used a yardstick to tidy the spacing up a bit so the dots were equal distance from the sides and from each other. As I walk to the garage I remember that I haven’t fed my fish yet today…so I stop and do that…

One of these days the big goldfish is going to jump right out of there!

Ok, back to the project!  I got my Craftsman drill ready and used the appropriate sized drill bit which happened to be 3/8 inch.  Now here is the tricky part…this is how I got my holes to be straight so the dowels don’t lean crazy.  I put a ribbon spool on the board and held it while I drilled. 

Ok, now I know there is probably a tool to accomplish this in a less silly fashion, but I use what I have!  I make do!  My mom taught me that…she has eight kids and she could whip up a big meal out of not much or make us all clothes out of what she could get.  So that is my mom’s trait that I am happy to have—she is much better at it though!

Looking pretty straight now, huh?  So next, sand it all nice and purty!  I have an electric sander and couldn’t quite find the coordination to sand with two hands and take a pic, so no pics of that part! 

Now give it a nice coat of spray paint (or you wouldn’t have to do this step, it works fine either way!).  And yes, that is my trash can lid that I spray painted on.  I always use it for all my spray painting—that’s just how I roll around here!  Let the paint dry all the way (trust me on this one—it is hard to peel a ribbon roll off the board when you didn’t let the paint dry all the way) and….

I  used a small rubber mallet to pound the dowels into the drilled holes.  (The dowels are 12 inches tall, did I mention that?)  You could put a drop of wood glue or Gorilla glue on dowel before you hit it into the hole.

Drum roll please!!!!  All done…..

Total cost to make…nothing!  I had the dowels, paint, sandpaper, boards left over from another project. 

Now, I hate to admit it, but I have more spools of ribbon in my craft room that need to be stored onto my new holder too!  Can a person have too much ribbon?
I had linked this project up to Jill's great blog Creating My Way to Success last week, but thought I would share it here too!

Ellen

Guest posting at Creating My Way to Success!!

Jill asked me to guest post over at Creating my Way to Success!!  You should bop over there and check it out…you will find a tutorial on how to make this wooden ribbon organizer!

And while you are there, check out Jill’s blog…she has a great linky party and lots of great ideas!

       
Ellen