CAS NO：126-83-0
Molecular weight：196.5851
Molecular formula：C3H6ClNaO4S
Project | Index |
|---|---|
Appearance | Colorless to light yellow transparent liquid |
Color，APHA | ≤60 |
Viscosity，25℃mPa.s | 100-200 |
Epoxy value，eq/100g | 0.60-0.70 |
Easily saponifiable chlorine，eq/100g | ≤0.01 |
Inorganic，eq/100g | ≤0.005 |
Hydrolyzable chlorine，% | ≤0.1 |
Moisture，% | ≤0.1 |
Note: Customization is available upon customer's request.
Avoid contact with skin, eyes, and clothing. Wear protective glasses and rubber gloves during operation. After contact, immediately rinse with plenty of water or soapy water for at least 15 minutes and seek medical attention.
Packaged in 25kg woven bags, or as per customer requirements. Store in a sealed condition and use up as soon as possible after opening. Store indoors in a cool, dry, and well-ventilated area with a shelf life of twelve months. The warehouse should be equipped with dry powder, foam, sand, and carbon dioxide fire extinguishers.
CAS NO：2224-15-9
Molecular weight：174.19
Molecular formula：C8H14O4
項(xiàng) 目 | 指 標(biāo) |
|---|---|
Appearance | Colorless to light yellow transparent liquid |
Chroma, APHA | ≤100 |
Viscosity，25℃ mPa. | 15～25 |
Epoxy, eq/100 | 0.70-0.80 |
Easily saponifiable chlorine, eq/100g | ≤0.01 |
Inorganic, eq/100g | ≤0.005 |
Hydrolyzable chlorine, % | ≤0.1 |
Moisture content, % | ≤0.1 |
Note: Customization is available upon customer's request.
Avoid contact with skin, eyes, and clothing. Wear protective glasses and rubber gloves during operation. Immediately wash with plenty of water or soap water after contact. In case of eye contact, open the eyelid and rinse with running water for at least 15 minutes and seek medical attention.
This product is packaged in 250 kg/PE drums or 1250 kg/IBC drums, or as per customer requirements. After use, the packaging must be tightly sealed to prevent moisture absorption. It should be stored indoors in a cool, dry, and well-ventilated area, with a storage period of twelve months.
CAS NO：25038-04-4，90529-77-4
Molecular weight：260.284
Molecular formula：C12H20O6
項(xiàng) 目 | 指 標(biāo) |
|---|---|
Appearance | Colorless to light yellow transparent liquid |
Chroma APHA | ≤100 |
Viscosity，25℃ mPa. | 15～25 |
Epoxy, eq/100 | 0.70-0.80 |
Easily saponifiable chlorine, eq/100g | ≤0.01 |
Inorganic, eq/100g | ≤0.005 |
Hydrolyzable chlorine, % | ≤0.1 |
Moisture content, % | ≤0.1 |
Note: Customization is available upon customer's request.
Avoid contact with skin, eyes, and clothing. Wear protective glasses and rubber gloves during operation. Immediately wash with plenty of water or soap water after contact. In case of eye contact, open the eyelid and rinse with running water for at least 15 minutes and seek medical attention.
This product is packaged in 250 kg/PE drums or 1250 kg/IBC drums, or as per customer requirements. After use, the packaging must be tightly sealed to prevent moisture absorption. It should be stored indoors in a cool, dry, and well-ventilated area, with a storage period of twelve months.
active ingredient
Copolymer of styrene and acrylate monomers, approximately 54% aqueous dispersion.
Laws and regulations
Its composition complies with the national standard GBT20623-2006 for emulsions used in architectural coatings.
◆ Excellent flexibility and toughness.
◆ Excellent stain resistance.
◆ Excellent compatibility with high-alkalinity materials.
◆ The formula has a wide adaptability.
Appearance：Milky white liquid
Odor: None or slightly ammoniacal
Solids content: 53.0-55.0% (105℃, 2h)
Density: 1.00-1.10 g/cm3 (at 20℃)
Viscosity: 500-2000 mPa.s (at 25℃)
pH value: 6.0-8.0 (at 25℃)
Glass transition temperature: -15℃
Minimum film-forming temperature: -8℃
Ionicity: Anionic
Note: The above data are typical for the product. For detailed specifications, please refer to the enterprise standard.
◆ After adding an appropriate amount of dispersant, defoamer, and other additives to this product, simply mix the prepared powder until it is evenly dispersed.
◆ Do not mix with cationic substances.
◆ The addition process is the same as that of SBR.
Before using this product, please refer to and understand the Material Safety Data Sheet (MSDS) and container label to obtain information on safe use, hazards, and health and environmental information related to the product.
Store in a cool and dry warehouse, with a storage temperature of 5-35℃, and prevent freezing.
The shelf life is 6 months when unopened. Please keep the container tightly closed when not in use.
Packaging specification: 200KG/PE drum, 1000KG/PE drum.
◆ No scaling: This product does not contain scaling or coking components, and it is supplemented with anti-scaling ingredients. Long-term use will not affect heat conduction on metal surfaces due to scaling.
◆ High corrosion inhibition: It has a strong protective effect on carbon steel and copper pipes. The corrosion rate of this product on carbon steel is 1/14 of tap water, 1/3 of 40% ethylene glycol, and 1/4 of 20% calcium chloride.
◆ High specific heat: High efficiency in transferring cold.
◆ High thermal conductivity: It enhances heat transfer efficiency and conserves heat transfer area.
◆ Low viscosity: At -20℃, its viscosity is 14cps, lower than that of conventional secondary refrigerant ethylene glycol (17cps). Compared to ethylene glycol, it has lower pipe resistance during flow, lower pump energy consumption, and is more efficient and energy-saving.
◆ Soluble in water, facilitating system maintenance and cleaning.
◆ High flash point: non-flammable, non-explosive, safe to use.
◆ Safe and non-toxic, this product has a neutral pH value, no odor, and does not produce any toxic gases in the usage environment. It is friendly to humans and has lower toxicity than calcium chloride and ethylene glycol.
◆ Good compatibility. It can be mixed and used with both calcium chloride and ethylene glycol systems, and can serve as a supplementary fluid for these systems.
Appearance: Light yellow to yellow transparent liquid
Density: 1.10-1.20g/cm3 (at 20℃)
Viscosity: ≤30 mPa·s
pH value: 6.0-8.0
Specific heat: 3.500 kJ/(kg·K)
Thermal conductivity: 0.540 w/m·K
Boiling point: ≥105℃
Freezing point: -24℃
Water solubility: miscible in any proportion
Note: The above data are typical for the product and should not be construed as technical standard specifications. For the latest values and complete information, please refer to the Material Safety Data Sheet (MSDS).
◆ Clean the refrigeration system to remove mechanical impurities.
◆ Add this product as needed.
◆ Start the refrigeration system according to the refrigeration steps.
Your customer service representative will recommend the most ideal addition amount and point of addition based on the paint system, to ensure that your system achieves optimal performance.
Before using this product, please refer to and understand the Material Safety Data Sheet (MSDS) and container label to obtain information on safe use, hazards, as well as health and environmental information related to the product.
When adding the refrigerant to the refrigeration system, please wear appropriate personal protective equipment (see Section 8 of the MSDS for details).
Store at will under natural conditions.
The shelf life is 24 months without opening.
Packaging specifications: 250KG/PE drum, 1250KG/IBC drum, or tanker.