CAN

CAN line

USB and Ethernet bridges to isolated CAN FD, CANnify boards, and the DB-9 and terminal-block adapters.

draft This page is a stub; its content comes in a later step.

To come: CANnify boards and the released adapters.

B095, Ethernet to CAN

B095 prototype board with an Ethernet jack, two USB-C connectors, an SD card slot and a coin cell holder
FIG. 1B095, the first Ethernet-to-CAN board and the design that led to today's CAN line: an Ethernet jack, two USB-C connectors, an SD card slot and a coin cell holder. Superseded by B125 and B135.

B125, Ethernet to 2x isolated CAN FD

B125 Ethernet to 2x ISO FDCAN bridge PCB, three-quarter view
FIG. 2B125 rev B, the render: Ethernet to two isolated CAN FD channels on DB-9, with SD card logging and optional PoE or backplane power. Three rev A boards were hand-assembled 22 Apr 2024; commercial release: TBD.

B135, USB to isolated CAN FD

B135 USB HS to ISO FDCAN bridge PCB, three-quarter view
FIG. 3B135 rev B, the render
Assembled B135 rev B board on a bench: DB-9 connector, a transformer, a coin cell holder, a microSD slot and USB-C
FIG. 4B135 rev B, the real board