0% found this document useful (0 votes)
61 views1 page

Service Bulletin: Compatibility Between Older Firmware and Newer Flash Memory

This service bulletin notifies technicians that the flash memory component used in some printer models has been changed from Spansion to Numonyx. Firmware versions mentioned in the document are required to support the new Numonyx flash memory. The firmware and manual updates are needed to prevent issues from incompatible older firmware and the new flash memory type.

Uploaded by

ondemandprint
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
61 views1 page

Service Bulletin: Compatibility Between Older Firmware and Newer Flash Memory

This service bulletin notifies technicians that the flash memory component used in some printer models has been changed from Spansion to Numonyx. Firmware versions mentioned in the document are required to support the new Numonyx flash memory. The firmware and manual updates are needed to prevent issues from incompatible older firmware and the new flash memory type.

Uploaded by

ondemandprint
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Service Bulletin

SB Number: SB 2G1-024 Creation Date: 26/04/2010


Subject: Compatibility between older firmware and newer flash memory
Model: FS-9130DN/9530DN

Because the commonly used Spansion flash memory has become difficult to obtain, we changed the common type
to Numonyx flash memory. The firmware mentioned below has been upgraded to support the Numonyx flash
memory. Therefore please unsure that the firmware is at least upgraded to the versions mentioned in the table
below.

When the system firmware does not support the flash memory on the main board, the flash memory can not be
recognized and the machine can not operate. Older flash memory then Spansion is supported by later firmware
versions.

Firmware version supporting the Numonyx flash memory


Model Firmware type Supporting version Service bulletin Affected part
FS-9130DN/9530DN Main S2G1_3000.013.001 2G1-023 No. 1

Parts
No. Old Parts New Parts Description Q’TY Interchange- SP
No. No. ability
Old New Old New
1 302G101040 302G101041 CODE DIMM PWB ASS’Y WITH SOFTWARE 1 1 O O O
2G101040 2G101041

Classification Entire stock rework X In-field modification by case No modification necessary


In-field modification at next visit
Field measure Please confirm the firmware version of the installed board by printing out the status page/service
status page, before downloading the firmware to prevent downloading of the old firmware.

Serial numbers of affected machines


Type Serial number
FS-9130DN/9530DN Not available

KMIS Service Department, Kyocera Mita Europe


Page  of 1 A016 / SB 2G1-024

You might also like