Section.

Bill of Quantities

Name of works: Supply, installation, testing and commissioning of Electrical, sub-station and Lift
S.N. Description system for under construction of Market at Savar, Qnt. unit board,
Cantonment UnitDhaka.
rate Amount
(taka) (taka)
1. S/F Wiring complete for one light ,fan and bell point controlled
by one switch using PVC non shd single core cable1.3/1.5rm
(3/0.029) (iyal), holder, celing rose with PVC concealed
conduit as sch spd. Including switch board final sub ckt,
conduit heavy gauze and necessary consumables.

1.Light Point Connected with Generator for Corridor 2400 Nos.

2. Supply ,Fitting, Fixing of 5-15watt LED Light, holder/shed for 2400 Nos.
Corridor with necessary fitting, Brand is as per direction of EIC

3. Supply ,fitting, Fixing of Garden, Security Lighting , Stair 400 Nos.

Lighting ,Toilet Lighting and Others as per direction of EIC

4. Exhaust fan AC 230/220 volts single plase 50HZ complete with 30 Nos.
capacitor ,blade ,louver, rain guard etc 400 mm sewp .Brand GEC or
direction of EIC

5. Pole PC tubular 12 m height supply ,setting & erection in position all 20 Nos.
as spd and direction of EIC

6. Three phage Meter Board with all excesories for Each Shop 15-200 amps 30 Nos.

7. Single phage Meter Board with all excesories for Each Shop 15-25 amps 1700 Nos.

8. Dish Cable Point for the all floor DB point with specified dish line cable 40
,other arrangement ,connectors point and as per direction of the EIC

9. PABX Cable,Connector, Control room equipment and all 40

arrangement in DB point as per the direction of EIC

10. Steel box made with 16 BG,MS/ plain sheet complete with hinged
type door(single/double shutter) built-in type locking system with
necessary arrangement for fixing of MCB/MCCBs by locking it’s
knob out on the top cover is shutter grey hammer spray painting to
the satisfaction of engineer in charge. All MCCB`s & ACB, From ABB,
SACE Italy /USA / UK / Germany / Switzerland /France (Adjustable),

10.1 Steel box for MDB- size 1800mmx900 mmx600 mm 4

10.2 Steel box for EMDB- size 1800mmx900 mmx600 mm 4

10.3 Steel box for DB- size 900mmx600 mmx600 mm 40

10.4 Steel box for EDB- size 900mmx600 mmx600 mm 40

10.5 MK Steel box for SBD- size 4500mmx300 mmx125 mm 2000

Main Distribution board (MDB) fabricated with

16BG,MS/ plain sheet ,FI bar and specified
MCCBs/busbar etc including hammer paints & locking
arrangement consisting of foreign MCB/MCCBs
(Adjustable)

10.6 1000A 04

10.7 800A 04

10.8 300A 04

10.9 250A 08

10.10 225A 02

10.11 200A 16
10.12 160A 02

10.13 150A 02

10.14 125A 36

10.15 100A 10

10.16 70A 02

10.17 63A 20

10.18 40A 30

10.19 16-32A 4000

11.0 LT CABLE WORK

Supply, laying including installation, testing and commissioning of
the following sizes XLPE insulated and PVC sheathed (N2XY)
cable and PVC insulated (BYA) cable manufactured by M/S
BRB/paradise/supersign/others Cables Ltd. Cable electric low and
medium tension laid in trenches trench excavation, embankments,
required bricks/ tiles sand etc (Including pipe /conduit/duct is to be
paid separarately) as specified voltage & current rating according to
cablecode BYA/NYY/BYM/A2×Y/NYSEYFG by to VDE standard.
11.1 4X(2 X1C-300sq mm(NYY) cable) with AS ECC-300 sq.mm BYA 100 M

11.2 4X1c-400 sq mm(NYY) cable) with ECC-400 sq.mm BYA 100 m

11.3 4X(2 X1C-630sq mm(NYY) cable) with AS ECC-400 sq.mm BYA 50 M

11.4 4X(1C-70 sq mm(NYY) cable) with AS ECC-70 sq.mm BYA 50 m

11.5 4X(1C-120 sq mm(NYY) cable) with AS ECC-70 sq.mm BYA 50 m

11.6 4X(1C-95 sq mm(NYY) cable) with AS ECC-70 sq.mm BYA 1201 m

11.7 4X(2 X1C-185 sq mm(NYY) cable)with ECC-95 sq.mm BYA 60 m

11.11 4X50 sq mm(NYY) cable with ECC-25 sq.mm BYA 100 m

11.12 4X35 sq mm(NYY) cable with ECC-16 sq.mm BYA 100 m

11.13 4X25 sq mm(NYY) cable with ECC-16 sq.mm BYA 100 m

11.14 4X16 sq mm(NYY) cable with ECC-16 sq.mm BYA 1000 m

11.15 4X10 sq mm(NYY) cable with ECC-10 sq.mm BYA 1000 m

11.16 4X6 sq mm(NYY) cable with ECC-6 sq.mm BYA 3000 m

11.17 2X10 sq mm(NYY) cable with ECC-10 sq.mm BYA 1000 m

11.18 2X6 sq mm(NYY) cable with ECC-6 sq.mm BYA 3000 m

11.19 2X4 sq mm(NYY) cable with ECC-4 sq.mm BYA 3000 m

11.20 2X1C-2.5 sq mm(NYY) cable with ECC-2.5 sq.mm BYA 3000 m

12. S/F Wiring complete for three pin point using pvc non 50 Nos.
sheathed single core cable 2.5 rm (direct from SDB) with 3 pin
15/20 Amps socket as sch spd.

13. S/F PVC conduit 20 mm dia as spd 5000 m

14. S/F -do-but 25 mm dia on spd 5000 m

15. Supply installation and tsting of end suction vertical discharge 03

direct coupled centrifugal pumping set having capacity
150GPM against water head 60m at efficiency not less than
60% complete with motor electric AC 400volt ,50Hz, 3 phase
HP 25 as specified model including base plate ,coupling
guard, control panel with soft starter, main switch and switches
 connecting cables and testing /commissioning/trail run to the
satisfaction of the EIC.The components shall be manufactured and
tested in UK/USA/Germany/Japan/France.

16. upply and installation of submersible pumping set having 01

capacity 150GPM against water head 70m at efficiency not
less than 60% complete with motor electric AC 400volt ,50Hz,
3 phase HP 25 as specified model including base plate
,coupling guard, control panel with soft starter, main switch
and switches connecting cables and testing /commissioning/
trail run to the satisfaction of the EIC.The components shall be
manufactured and tested in UK/USA/Germany/Japan/France.
 Lift
S.N. Description unit Qnt. Unit rate amount

1. ELEVATOR - PASSENGER (LIFT-01 & LIFT-05) 02 set

Design, Supply ,Installation, testing & commissioning of Electric
Traction type Fully automatic Passenger Elevator Having
Stainless Steel mirror polish with Ac variable voltage & variable
frequency drive unit suitable for operation on 415 v,3 phase ,50
hz,Ac supply ,having speed of 1.5 MPS ,power operated glass
central opening /two -panel side opening type car & landing
doors, electro magnet brake system , operating panel with
luminous buttons, overload warning indicator , battery
operated alarm bell , emergency light , intercom suitable for
hook up to AAI's EPABX, infrared ray sensing door protection
for full height , reverse phase relay on controller , fire man's
switch at ground floor , digital car positions indicator in car & at
all floors with up/down direction , light fixtures ,ventilation
fan , landing sill , main beam in shaft for machine , pit laddr etc
complete with all accessories serving different floors in the lift
shaft along with Automatic Rescue Device (ARD ) complete with
dry maintenance free sealed batteries as required etc ., as per
detailed specifications enclosed : manufactured, assembled and
tested in USA/ UK/ GERMANY/ FRANCE/ SWEDEN/JAPAN/
SPAIN

Passenger Lifts with 15 passenger /1000 kg capacity, 1.5

mps speed, ACVVVF control, Single Selective control
Operation

a). 7 stops ( Ground floor + 1st Flr-6th floor) all on same side,
travel 25000 mm approx.

b). Spare Requirement parts for 5 years: relar- 01 set, mccb

(10-100A)- 01 set, sensor-01 set, electronics card -01 set,.

necessary tools- Multimeter (voltcraft, m-3850), clamp meter-

266, mega-ohm meter-dy5103, infrared thermometers laser
temperature meter, combination hand & machine box socket tools
(300 pcs, etc),

2. ELEVATOR - PASSENGER (LIFT-02& LIFT-04) 02 set

Design, Supply ,Installation, testing & commissioning of Electric

Traction type Fully automatic Passenger Elevator Having Stainless
Steel mirror polish with Ac variable voltage & variable frequency
drive unit suitable for operation on 415 v,3 phase ,50 hz,Ac
supply ,having speed of 1.5 MPS ,power operated glass central
opening /two -panel side opening type car & landing doors, electro
magnet brake system , operating panel with luminous buttons,
overload warning indicator , battery operated alarm bell ,
emergency light , intercom suitable for hook up to AAI's EPABX,
infrared ray sensing door protection for full height , reverse phase
relay on controller , fire man's switch at ground floor , digital car
positions indicator in car & at all floors with up/down direction ,
light fixtures ,ventilation fan , landing sill , main beam in shaft for
machine , pit laddr etc complete with all accessories serving
different floors in the lift shaft along with Automatic Rescue Device
(ARD ) complete with dry maintenance free sealed batteries as
required etc ., as per detailed specifications enclosed :
manufactured, assembled and tested in USA/ UK/ GERMANY/
FRANCE/ SWEDEN/JAPAN/ SPAIN

Passenger Lifts with 18 passenger /1200 kg capacity, 1.5 mps

speed, ACVVVF control, Single Selective control Operation
 a). 7 stops ( Ground floor + 1st Flr-6th floor) all on same side,
travel 25000 mm approx.

3. ELEVATOR - PASSENGER (LIFT_-3 ,FIRE LIFT) 01 set

Design, Supply ,Installation, testing & commissioning of Electric

Traction type Fully automatic Passenger Elevator Having Smoke
proof Cabin & fire proof door with fire proof cables with Ac
variable voltage & variable frequency drive unit suitable for
operation on 415 v,3 phase ,50 hz,Ac supply ,having speed of 1.5
MPS ,power operated glass central opening /two -panel side
opening type car & landing doors, electro magnet brake system ,
operating panel with luminous buttons, overload warning indicator ,
battery operated alarm bell , emergency light , intercom suitable for
hook up to AAI's EPABX, infrared ray sensing door protection for
full height , reverse phase relay on controller , fire man's switch at
ground floor , digital car positions indicator in car & at all floors
with up/down direction , light fixtures ,ventilation fan , landing sill ,
main beam in shaft for machine , pit laddr etc complete with all
accessories serving different floors in the lift shaft along with
Automatic Rescue Device (ARD ) complete with dry maintenance
free sealed batteries as required etc ., as per detailed specifications
enclosed : manufactured, assembled and tested in USA/ UK/
GERMANY/ FRANCE/ SWEDEN/JAPAN/ SPAIN

Passenger Lifts with 18 passenger /1200 kg capacity, 1.5 mps

speed, ACVVVF control, Single Selective control Operation

a) 7 stops (Ground floor + 1st Flr-6th floor) all on same side

travel 25000 mm approx.

4. ELEVATOR - PASSENGER ( OBSERVATION ) 01 set

Design, Supply ,Installation, testing & commissioning of Electric

Traction type Fully automatic Passenger Elevator Having
Observation sides Transparent glass with Ac variable voltage &
variable frequency drive unit suitable for operation on 415 v,3
phase ,50 hz,Ac supply ,having speed of 1 MPS ,power operated
glass central opening /two -panel side opening type car & landing
doors, electro magnet brake system , operating panel with luminous
buttons, overload warning indicator , battery operated alarm bell ,
emergency light , intercom suitable for hook up to AAI's EPABX,
infrared ray sensing door protection for full height , reverse phase
relay on controller , fire man's switch at ground floor , digital car
positions indicator in car & at all floors with up/down direction ,
light fixtures ,ventilation fan , landing sill , main beam in shaft for
machine , pit laddr etc complete with all accessories serving
different floors in the lift shaft along with Automatic Rescue Device
(ARD ) complete with dry maintenance free sealed batteries as
required etc ., as per detailed specifications enclosed :

Passenger ( Observation) Lifts with 6 passenger /450 kg

capacity, 1 mps speed, ACVVVF control, Single Selective
control Operation

a) 7 stops ( Ground floor + 1st Flr-6th floor) all on same side,

travel 25000 mm approx.
 Sub-station

S.N. description Qn.ty unit Unit rate amount

1. Lightning arrester: 01 set

Supply, installation, testing and commissioning of indoor/outdoor
type 33 KV, 50 Hz, 140A, (7 KA), 230 KV BIL lightning arrester
complete with mounting accessories etc. Manufactured by GEM
Co. Ltd, Bangladesh or equivalent product of USA / UK / Germany
/ Switzerland /France origin. (3 nos. in a set).

2. 33KV AUTOMATIC VOLTAGE REGULATOR: 01 set

Supply, Installation, Testing & commissioning of type tested 140A

(min.), 19.08KV, 3 nos. (1 set) of single phase, indoor/outdoor type
Automatic Voltage Regulator (AVR) in sealed tank design as per
Technical Specification with the following data. The AVR must
comply with the latest requirements of BPDB. The work shall be
completed with 33KV By-Pass switch including all necessary
accessories to complete the installation.
Rated Current: 140A (min.)
Rated Voltage: 19.08KV
Single phase/33KV three phase, 50 Hz.
Voltage Regulation: ±10% in 32 steps or 5/8% each
Complete with following spares for the above Regulation
- 6 nos. Fuses
- 2 nos. Position Indicator Glass
- 6 nos. Oil sight glass

3. H.T. SWITCHGEAR 01 set

Supply, installation, testing and commissioning of type tested
locally assembled confirming to IEC 298/694 high voltage switch
gear (33KV) of sheet steel clad, dust and vermin proof, free
standing, floor mounting, indoor type, 33KV,50Hz, 210A (min.),
350 MVA rated capacity. The switchgear shall be inclusive of
withdrawable type Vacuum circuit Breaker (VCB), CT, PT, relay,
ammeter, voltmeter, energy meter, bus-bar, interlocked earth switch,
internal wiring etc all equipment and accessories complete as per
design, specification, standard, and instruction of Engineer-in-
charge. The switchgear must comply with the requirement of
relevant local Authority. The components shall be manufactured
and tested in UK/USA/Germany/Japan/France.

Incoming Feeder :
1 No. 33KV, 50HZ, 7KA (1 sec), Earthing switch to be interlocked
with the vacuum circuit breaker
1 No. 210A, 33KV, 50HZ, 7KA (3 sec) triple pole totally with-
drawable horizontal isolation type Vacuum Circuit Breaker with
both manual and motor operated mechanism with closing solenoid,
trip button, shunt releases, operating cycle counter, 6 N/O + 6 N/C
contacts, mechanical ON/OFF indicators etc.
2 Nos. 33KV cast resin insulated, double pole potential transformer
having ratio 33000/110V, class 0.5, of 50VA burden (in open delta
connection) for metering and protection.
1 No. of TP MCB for PT secondary protection.
3 Nos. of cast resin insulated 33 KV double core current
transformer having ratio 140/5/5A Core-1, 10VA. Class 0.5M10
Core-2, 15VA, Class 10 P10
1 No. of 0-15KV voltmeter with selector switch
1 No. of 0-140A Ammeter with selector switch
1 No. 3 phase 3 wire, two part time of the day solid state micro-
computer operated digital KWH meter with indicating "PEAK" &
OFF PEAK energy with maximum demand indicator in KW with
integrating time of 30 minutes.
 1 No. of synchrous time switch for double tariff operation of KWH
meter
3 Nos. of indicating lamps (ON/OFF/TRIP)
1 No. of panel heater with thermostat
3 Nos of indicating lamp for presence of three phase (R.Y.B.)
1 No. of operating handle.
1 No. of Triple pole solid state micro processor operated IDMT
relay with 2 (two) over current and 1 (one) earth fault protection
element with standard settings.
Outgoing Feeders:
2 nos. outgoing Feeder, each shall be equipped with the following:
1 No. 33KV, 50HZ, 7KA (1 sec.) Triple pole Earthing switch to be
interlocked with Vacuum Circuit Breaker
1 No. of 210A, 33KV, 50Hz, 7KA (3 sec) rupturing capacity,
Tripole, totally withdrawable horizontal isolation type of Vacuum
Circuit Breaker with both manual & motor operated mechanism
with closing solenoid, Trip button, shunt releases, operating cycle
counter, 6 N/O + 6 N/C anxillary contacts, mechanical ON/OFF
indicator etc
1 No. 33KV cast resin insulated, double pole potential transformer
having ratio 33000/110V, class 0.5, of 50VA burden (in open delta
connection) for metering and protection.
3 Nos. of cast resin insulated double core current transformer
having ratio 110/5/5A, Core -1, 10VA, class 0.5M10 Core - 2,
15VA, class 10P10
1 No. of 0-110A Ammeter with selector switch
3 Nos. of indicating lamp for the presence of three phases (R.Y.B.)
3 Nos. of indicating lamp (ON/OFF/TRIP)
1 No. of operating handle
1 No. of Triple pole solid state microprocessor operated IDMT
relay with 2 (two) over current and 1 (one) earth fault protection
element with standard settings
The tripping coil of the circuit breakers shall be activated by a
capacitor storage tripping device without DC (battery) supply
source for trip coil.

4. TRANSFORMER 02 set
Supply, installation, testing and commissioning of following dry
type cast resin, natural air cooled, 3-phase, 50 Hz, 33/0.415KV
indoor type distribution Transformer of DYN 11 vector group having
percentage impedance 4 - 6%, basic impulse insulation level
100KV, HV & LV bushings, complete with two windings , earthing
terminals, temperature sensor with thermometer, lifting lugs, name
plate arranged on tank top, conservator, oil level indicator, drain and filling
valves, bi-directional rollers, with first filling of oil in Transformer etc.
complete as required and suitable for operation at 40 0C ambient
temperature with maximum temperature rise 100 0C, manufactured
and tested in UK/USA/Germany/Japan/France in accordance with
IEC/NEMA /VDE/BSS/JIS standard.
technical Data:
-Rated Capacity : 3150 KVA
-Rated Frequency : 50 Hz
Rated Voltage,
-Primary : 33000 V
-Secondary : 415 V
Rated Current
-Primary : 55.11 A
-Secondary : 4390 A
Vector Group : DYN 11
Off-load tap changer : ± 2.5% , -5%, -7.5%
Ambient Temperature : 40°C
Temperature rise :
- in Oil : 60°C (Max)
- in Coil : 65°C (Max)
Star point brought
out & loadable upto : 100%
Max. service altitude : 1000 Meters
Installation : Indoor
No load losses : 5200 watts (approx.)
Full load losses : 25000 watts (approx.)
Impedance : 6% (approx)
Tolerances, As per IEC 60076 :
 Total Losses : + 10% of the total losses
Component losses : + 15% of each component
loss, provided that the tolerance
for total losses is not exceeded
Impedance voltage at rated ± 10% of the declared
current (principal tapping Impedance voltage for that tapping.
Accessories: -
-Silica gel breather
-Dial type thermometer with trip & alarm contact.
-Pressure relief device.
-Buchholz relay with trip & alarm contact.

5.0 L.T SWITCHGEAR

Supply, installation, testing and commissioning of 415V, 3-phase,
50 Hz, indoor type low tension switchgear of following
specification complete with voltmeter (0-600V) & ammeter of
adequate rating both with selector switch, indicting lamps for ON-
OFF and following components manufactured in
UK/USA/Germany/Japan/France, locally factory assembled in 16
SWG sheet steel clad, dust & vermin proof, free standing, floor
mounting epoxy resin powder coat painted cabinet. (MCCB's in LT
panel must comply NEMA/VDE/IEC/JIS/BSS standard)

5.1 LT PANEL 02 set

Incoming:
1 Set- 415V, 8000A, TPN&E hard drawn electrolytic insulated
copper busbar.
1 x 6000A, 80KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxiliary
contacts.
3 Nos. - 415V, 5000/5A ratio current transformer with suitable
accuracy and burden.
1 - Ammeter 0-5000A with selector switch
1 - Volt meter (0-500/600V) with selector switch
1 - Push button trip
3 - Indicating lamps (ON/OFF/TRIP)
3 - Indicating lamps for R.Y.B. phases.

Outgoing:
1x1000A (50KA), TP MCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release

1x800A (50KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5x160A (35KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5x100A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5x63A (25KA), TPMCCB with thermal overload and instantaneous

Electro-magnetic short circuit release.

5.2 LT PANEL-1 01 set

Incoming:
1 Set- 415V, 8000A, TPN&E hard drawn electrolytic insulated
copper busbar.
1 x 5000A, 80KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxiliary
contacts.
3 Nos.- 415V, 5000/5A ratio current transformer with suitable
accuracy and burden.
1 - Ammeter 0-5000A with selector switch
1 - Volt meter (0-500/600V) with selector switch
1 - Push button trip
3 - Indicating lamps (ON/OFF/TRIP)
3 - Indicating lamps for R.Y.B. phases.
 Outgoing:
1 x 3200A, 65KA, Triple pole with fixed type Metal clad Air
Circuit Breaker with motor operated electronic controlled time
dependent selectively operating with built in adjustable overload,
adjustable short circuit protection, under voltage releases and
auxiliary contacts.

1 x 1600A, 65KA, Triple pole with fixed type Metal clad Air
Circuit Breaker with motor operated electronic controlled time
dependent selectively operating with built in adjustable overload,
adjustable short circuit protection, under voltage releases and
auxiliary contacts.

2x1250A (65KA), TP MCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

2x1000A (50KA), TP MCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

1x800A (50KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

3x160A (35KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5x100A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

6x63A (25KA), TPMCCB with thermal overload and instantaneous

Electro-magnetic short circuit release.

5.3 BUS COUPLER 01 set

Supply, installation, testing and commissioning of 1x5000A, 80KA
TP+N withdrable type, metal clad Air Circuit Breaker with motor
and manual operated electric controlled time dependent selectively
ACB with built in adjustable overload and short circuit protection,
under voltage release & will be auxiliary contracts. This will be
used as BUS COUPLER between the NORMAL LT PANEL-1 &
NORMAL LT PANEL-2. This breaker and the main incoming
breakers of NORMAL LT PANEL-1 & NORMAL LT PANEL-2
shall be electrically interlocked such that this bus coupler breaker
can only be closed if either one of the main incoming breaker is
opened with components manufactured in
UK/USA/Germany/Japan/France.

5.4. LT PANEL-2 01 set

Incoming:
1 Set- 415V, 8000A, TP&NE hard drawn electrolytic insulated
copper busbar.
1 x 6000A, 80KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxillary
contacts.

3 Nos. - 415V, 5000/5A ratio current transformer with suitable

accuracy and burden.
1 - Ammeter 0-5000A with selector switch
1 - Volt meter (0-500/600V) with selector switch
1 - Push button trip
3 - Indicating lamps (ON/OFF/TRIP)
3 - Indicating lamps for R.Y.B. phases.
Outgoing:
1 x 6000A, 80KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxiliary
contacts.

1 x 3200A, 65KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxillary
contacts.
 3x160A (35KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release

5x100A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release
6x63A (25KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release

6.5 LT PANEL-AC 01 set

Incoming:
1 Set- 415V, 8000A, TP&NE hard drawn electrolytic insulated
copper busbar.
1 x 6000A, 80KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxiliary
contacts.

3 Nos. - 415V, 5000/5A ratio current transformer with suitable

accuracy and burden.
1 - Ammeter 0-5000A with selector switch
1 - Volt meter (0-500/600V) with selector switch
1 - Push button trip
3 - Indicating lamps (ON/OFF/TRIP)
3 - Indicating lamps for R.Y.B. phases.
Outgoing:
7 x 1000A, 65KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxillary
contacts.

18x125A (50KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

10x100A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

20x(10-40A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5.6 ESSENTIAL LT PANEL 01 set

Incoming:
1 Set- 415V, 1500A, TP&NE hard drawn electrolytic insulated
copper busbar.
1x800A (50KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release

3 Nos.- 415V, 800/5A ratio current transformer with suitable

accuracy and burden.
1 - Ammeter 0-800A with selector switch
1 - Volt meter (0-500/600V) with selector switch
1 - Push button trip
3 - Indicating lamps (ON/OFF/TRIP)
3 - Indicating lamps for R.Y.B. phases.

Outgoing:
1x320A (35KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release

1x260A (35KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

2x200A (35KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

3x160A (35KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

5x100A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

6x63A (25KA), TPMCCB breaker with thermal overload and

 instantaneous Electro-magnetic short circuit release

10x40A (25KA), TPMCCB breaker with thermal overload and

instantaneous Electro-magnetic short circuit release

6. P.F.I. PLANT
Supply, installation, testing and commissioning of following 415
volt, 3 phase, 50 Hz power factor improvement plants complete
with TP busbars and earth block micro processor control auto
power factor correction ralay with digital PF reading display,
capacitor bank, contactor, fuse, ON/OFF indiators for every stage
of capacitor bank (except directly connected one) etc. locally
factory assembled in 16 SWG sheet steel clad dust & vermin proof,
free standing, floor mounting, epoxy resin powder coat painted
cabinet. contactors, capacitor bank, relays, discharge resistor, fuse
etc. shall comply MENA/VDE/IEC/JIS/BSS standard and shall be
manufactured in UK/USA/Germany/Japan/France.

PFI CAPACITY 1900 KVAR

3 Nos.- 415V, 3200A hard drawn electrolytic insulated copper
busbar
1 No.- 415V, 100 KVAR, 50Hz TP Power capacitor bank with built-
in/separate discharge coil for connection directly with line through
fuse.
2 Nos.- 415V, 25 KVAR, 50Hz TP Power capacitor bank with built-
in/separate discharge resistor.
3 No.- 415V, 50 KVAR, 50Hz TP Power capacitor bank with built-
in/separate discharge resistor.
7 Nos.- 415V, 100 KVAR, 50Hz TP Power capacitor bank with
built-in/separate discharge resistor.
6 Nos.- 415V, 150 KVAR, 50Hz TP Power capacitor bank with
built-in/separate discharge resistor.
2 Nos.- 415V, 40 Amps. 50 Hz TP magnetic contactor with AC3
duty
3 No.- 415V, 80 Amps. 50 Hz TP magnetic contactor with AC3
duty
7 Nos.- 415V, 160 Amps. 50 Hz TP magnetic contactor with AC3
duty
6 Nos.- 415V, 250 Amps. 50 Hz TP magnetic contactor with AC3
duty
6 Nos.- 415V, 50 Amps HRC fuses with base
9 Nos.- 415V, 100 Amps HRC fuses with base
24 Nos.- 415V, 200 Amps HRC fuses with base
18 Nos.- 415V, 300 Amps HRC fuses with base

7. H.T. CABLE WORK

Supply, laying including installation, testing and commissioning of
the following sizes 33KV XLPE insulated HT cable With HT Cable
manufactured by M/S BRB/Paradise/super sign/Cables Ltd. In
kutcha ground by cutting 45.70cm width x 91.40cm depth trench
with necessary brick or tile protection and mending the damages
good by refilling trench with proper compaction. In pucca road and
tower top to tower bottom including G.I. pipe (National Tubes Ltd.)
with necessary accessories by cutting 45.70cm width x 91.40cm
depth trench mending the damages goods by earth filling providing
50mm thick compacted premix bituminous carpeting over one layer
flat brick soling and 75mm thick compacted water bound macadam
of khoa of brick.
3x240 sq. mm XLPE insulated HT cable. 300 M

3C-185 sq mm XLPE insulated HT cable. 100 m

8. LT CABLE WORK
Supply, laying including installation, testing and commissioning of
the following sizes XLPE insulated and PVC sheathed (N2XY)
cable and PVC insulated (BYA) cable manufactured by M/S
BRB/paradise/super sign Cables Ltd. Cable electric low and
medium tension laid in trenches trench excavation, embankments,
required bricks/ tiles sand etc (Including pipe /conduit/duct is to be
paid separarately) as specified voltage & current rating according to
cable code BYA/NYY/BYM/A2×Y / NYSEYFG by to VDE
standard.
4X(3X1C-400 sq mm(NYY) cable) with AS ECC-400 sq.mm BYA 100 m

4X(1C-500 sq mm(NYY) cable) with AS ECC-500 sq.mm BYA 100 m

9. EARTHING
Earthing the electrical installation with 38.10 mm (1.5") dia G.I.
pipe (earth electrode) having 6.35 mm dia holes across the dia at
305 mm interval securedly bonded with 2 nos. of NO. 2 SWG
HDBC earth lead with washer, nuts, bolts etc. sunk upto
undermentioned depth and protection of earth lead by 20mm mm
(3/4") dia G.I. pipe upto plinth level run at a depth of 609.6 mm (2
ft.) below G.L. upto main board to be earthed including necessary
connecting copper sockets, bolts, nuts including additional vertical
run of 12.7 mm dia G.I. pipe upto G.L. from 609.6 mm (2') depth
with blind socket for water pouring facility etc. complete for
maintaining earth resistance less than 1 ohm.

Depth of bottom of main electrode at 37338 mm. (122.5 ft) from 10 set
GL & length of electrode 36576 mm. (120 ft).

Construction of Earth inspection pit inside measurement 600mm 10 set

x600mm with 250mm thick brick in cement morter (1:4) with
100mm thick RCC top slab (1:2:4) with 1% re-inforcement 450mm
dia water sealed CI man hole cover with locking arrangement
including necessary earth works,site filling and one brick flat soling
75mm thick (1:3:6) base concereate for making inlet channel &
12mm thick (1:2) cement plaster with neat finishing etc. all
complete up to a depth of .75 meter.

10. Suppling, Fiting and Fixing of single lighting arrester on the top of 10 set
the building 1.22m long 12mm dia GI pipe and clamp with bolts
and 3mm mounted air spike ,Top of the lighting arrester should be
soldered and other fittings required etc.all complete in all respects
as per directions of the E-I-C.
11. Providing and drawing NO.2 SWG HDBC wire through 19mm 450 m
(3/4") dia G.I. pipe including fitting, fixing the G.I. pipe in wall or
column complete as required. The rate includes the supply &
installation of a copper earthing block of size 30"x2.5"x3/4"
(approx. as required) to be installed on sub-station wall using
suitable insulator.

12. CABLE KITS

Supply and fixing of heat shrink termination kit outdoor/indoor use
complete with DIN lugs earth connection hardware and cable
preparation kit (Indoor and Outdoor) at the point of cable
termination for 33 KV, 3-core XLPE insulated and PVC sheathed &
armoured cable of the following sizes (Made in
GERMANY/USA/UK/FRANCE)

3x240 sq.mm (FOR OUTDOOR USE) 4 set

3x240 sq.mm (FOR INDOOR USE) 7 set

13. GENERATOR

600 KVA Diesel Generator Set 01 No.

Supply, installation, testing and commissioning of 600 KVA (Prime
rating), 415V, 50 Hz, P.f. 0.8, 3-phase 4-wire diesel generator with
foreign made acoustic canopy (sound level max. 75 dB @ 7m),
including auto-changeover/auto-transfer (1000A) switch (ATS),
 battery, battery charger, earthing, fuel tank (min. 8 hrs. capacity)
etc. complete as per design, specification, standard, and direction
of. Engineer-in-charge. The Engine, Alternator, ATS, Control Panel
etc. must be manufactured, assembled and tested in USA/ UK/
GERMANY/ FRANCE/ SWEDEN/JAPAN/ SPAIN. The diesel
generator and its accessories must comply with the technical
requirement of relevant local Authority. One number of manual
changeover switches shall be supplied so that the continuity of the
service can be maintained in case of any disturbance in auto-
changeover switch. water cooled radiator with blower fan
(water cooled engine only) with fan guards and fuel and
injection pump, electrically operated with ammeter, lubricating
oil pump, auto-speed governor air cleaner fuel and oil tank,
automatic safely shut off for high water temperature, low oil
pressure, over speed etc. water temperature gauge, oil
pressure gauge tachometer, hour meter, start and stop
switch, exhaust silencer, fly wheel coupling steel disc.
Vibration isolator mounding steel base frame to support
radiator, all complete in all respect as per direction of the
Engineer-in-charge.

Alternator having one single bearing brush less rotating type

compound self exciting compound system drip-proof screen
protected type with output voltage maintained within 1% with
electronically operated automatic voltage regulator etc. all
complete in all respect as per direction of the Engineer-in-
charge.

Full set of tools necessary for maintenance of the complete

generating set, foundation bolts with nuts starting DC
batteries connecting leads with sockets battery first filling of
lubricants and fuel etc. all complete in all respect as per
direction of the Engineer-in–charge.
Spare Requirement parts for 5 years: all filter-2 set,
relar/timer-2 set, mccb(10-100A)- 30 pcs, sensor- 1set, all
electronics card- 1set, etc.
High speed computer- 1 set.

necessary tools- Multimeter (voltcraft, m-3850), clamp meter-

266, mega-ohm meter-dy5103, infrared thermometers laser
temperature meter, combination hand & machine box socket tools
(300 pcs, etc),

14. The contractor shall be responsible for communicating with the 1 job
local electric supply office and other authority viz. Chief Inspector
of electric lisence board, Govt. of Bangladesh for their
inspection/clearance and sanction of eclectic load, thereof, if any
shall be included in the price of the item. The contractor shall
submit the application for required load sanction and other paper
formalities on behalf of the employer till the sub-station is
commissioned and handed over to the employer. However, the
security deposit money and HT metering panel installation charges
for the proposed sub-station will be directly paid to local electric
supply authority by the employer on submission of deposit slip &
HT metering panel installation charges from the concern office of
local electric supply authority. The contractor will not include in
this item the amount of security deposit money and HT metering
panel installation charges but all other incidental charges.
15. Supply and fixing of following capacities multipurpose ABCE dry
chemical powder stored pressure type with manometer system Fire
Extinguisher suitable for repeated use complete with wall bracket,
CO2 cartridge, easy refilling system etc. as per sample approved by
the Engineer-in-charge.
6 Kg. capacity. 10 eac

16. Supply and installation of required no./quantity of approved type 1 job

danger sign and rubber floor mat in the sub-station area as per
direction of the Engineer.

Grand Total Tk.

In words TK... .......................................................................................................................................................................

 SIGN & SEAL OF TENDERER

Section 6. Bill of Quantities

Name of works: Supply, installation, testing and commissioning of Fire fighting system for under
construction of Market at Savar, Cantonment board, Dhaka.

Ser Description of Items Unit Qty. Unit Rate Total Amount

1 2 3 4 5 6
1 Fire pump(Diesel Driven)

Supply, Installation & testing of Horizontal split case Centrifugal Set 1.00
pump Discharge Capacity 1250 USGPM Head 140 M efficiency
60% minimum speed 2960 RPM Automatic and continuous during
occasional use operation 175 BHP Power. Engine with Diesel driven
Pump control panel, soft strainer, main MCCB, first filling of fuel
tank & Additional accessories (Cooling loop, base, drive shaft,
guard, fuel tank and accessories, pump shall be operate on pressure
signal and pressure switch, flex connector and battery set) UL / FM /
CE certified as spd. The components shall be manufactured and
tested in UK/USA/Germany/Japan/France.
necessary tools- Multimeter (voltcraft, m-3850), clamp meter-
266, combination hand & machine box socket tools (300 pcs, etc),

2 Fire pump(Motor Driven)

Supply, Installation & testing of single/multi-stage horizontal Split Set 1.00

case Centrifugal pump with cast iron body, bronze impeller, stainless
steel shaft coupled directly through flexible coupling on a common
fabricated MS base frame to 150 HP, TEFC squirrel cage induction
motor suitable for operation on 400/440 volts, 3 phase, 50 Hz
Discharge Capacity 1250 USGPM, Head 140 M. The Electric motor
shall be provided with in-built heating system/ arrangements. The
pump set shall be complete with couplings guard; vibration isolation
pads (cushy foot) mechanical seal, control panel, soft strainer, main
MCCB & Additional accessories etc. pump shall be operate on
pressure signal and pressure switch . UL / FM / CE certified
including control panel & Additional accessories as spd. The
components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

3 Jockey Pump:

a) Supply & Installation of multi-stage vertical turbine pump with Set 1.00
cast iron body, bronze impeller, steel C-40 steel shaft coupled
directly through flexible coupling on a common fabricated MS base
frame to 65 USGPM 15 HP, Head 150 m, TEFC squirrel cage
induction motor suitable for operation on 400/440 volts, 3 phase, 50
Hz. The Electric motor shall be provided with in-built heating
system/arrangements. The pump set shall be complete with
couplings guard, vibration isolation pads (cushy foot) mechanical
seal etc ISO standard including control panel & Additional
accessories as spd.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
4 Fire Hose Cabinet.

Supply & fixing of painting & labeling of fire hose cabinet different Each 68.00
locations. Type: wall mounted recessed type, Material: Mild steel
sheet of 1.5 mm thick operation: Manual swings type rack/cradle, 4
mm thick float glass and hand-key. ‘FIRE HOSE’ written on the
front. Cabinet Size 915 mm x 760 mm x 250 mm. Capacity: Ti
accommodates Inos. 65 mm dia& 30 meter long Hose pipes with
Nozzle. Finishing: Epoxy Powder red paint.

5 Fire Hose rack.

Supply & fixing of fire hose rack with 40 mm dia hose pipe 30 m Each 56.00
length Adopter/coupling including accessories ( nipple, landing
valve, clip, nozzle etc) fire resistant rubber lined material collapsible
type UL/FM/CE certified.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

6 Fire Hose Pipe.

Supply & fixing in position 65 mm nominal bore and 30 m long Each 12.00
synthetic fiber, circular woven jacketed, rubberized fabric reinforced
rubber lined (RRL) fire hose pipe of approved make having TAC &
MMD approval with a pair of 65 x 65 mm gunmetal instantaneous
type, heavy duty delivery hose coupling bound to hose coupling with
copper wire, complete type: Collapsible. Material: Fire resistant
synthetic twill. Diameter: 65 mm. Length : 30 m. Accessories:
Adopter/ Coupling etc
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

7. Nozzle (Jet & Spray )

Supply & fixing in position short gun metal nozzle of approved Each 12
quality 65 mm dia with instantenous branch pipe type: adjustable
spray/jet. Material: capper alloy/gun metal

8 Fire Hydrant valve (Landing valve)

Supply & Fixing in position gun metal fire Hydrant valve of Each 56.00
approved quality 65 mm dia Female instant oblique single outlet, 75
mm Flanged inlet, Brass spindle cast iron wheel, gun metal blank
cap and chain complete with companion flange, bolts, nuts, rubber
gasket and fire red painted.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

9 Fire Pillar Hydrant Valve: Supply& fixing of 100 mm diapiller Each 12.00
hydrant 2 way & 65 mm dia side landing valve as spd
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
.

10 Fire Brigade Inlet box with breeching connection

Supply & fixing in position fire brigade inlet connection with CI Each 2.00
body having 4 way Gun metal 65 mm male instantaneous inlets
fitted with built in check valves, gun metal blank caps and chains.
150 mm gun metal flaned outlet, 25 mm nominal bore gun metal
drain valve complete with bolts, nuts, compressed asbestos gasket,
painted in fire red colour including cutting and making good the
walls and floors wherever required
11 Valve and accessories:

Supply & Fixing of valves and accessories made of bronze/cast

malleable steel as per Specification
GATE VALVE:
Supply & fixing of gate valve. Type O, S & Y Material: Bronze
(Upto 65 mm ), cast steel (above 65 mm) Pressure rating : PN-16
 (Minimum) Joints : Threaded (Upto 65 mm), flanged ( above 65
mm) The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

a) 200 mm dia Each 4.00

b) 150 mm dia Each 8.00

c) 100 mm dia Each 20.00

d) 80 mm dia\ Each 1.00

e) 65 mm dia Each 1.00

12 Glove Valve :

a) 150 mm dia Each 2.00

b) 65 mm dia Each 1.00
13 CHECK VALVE:
Supply & fixing of Check valve. Type: Swing Check. Lift check,
Spring loaded. Material: Cast iron. Pressure rating : PN-16
(minimum) Joints: flaged type)
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

a) 150 mm dia Each 2.00

b) 65 mm dia Each 1.00
14 FLEXIBLE CONNECTION:

Supply & fixing of Flexible joint: Type: Sperical, material: Butyle or

neoprene, pressure rating: PN-16 (minimum), Joints flagged type as
spd. The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

a) 150 mm dia Each 4.00

b) 80 mm dia Each 1.00
c) 65 mm dia Each 1.00
15 Auto Air Vent valve :

Supply & fixing of Auto Air vent valve, Type Free floating
automatic, and materials cast steel, Accessories: Pad cock. Mounting
accessories The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

a) 20 mm dia Each 6.00

16 Ball Valve

a) 40 mm dia Each 50.00

b) 65 mm dia Each 56.00

17 FOOT VALVE:

Supply & fixing of foot valve type: lift check, Material: Malleable
steel, Pressur rating: PN-16 (minimum), Joints: flagged type.
a) 200 mm dia Each 2.00
b) 65 mm dia Each 1.00
18 Y-STRAINER:

Supply & fixing of Y-Strainer. Type: Y-Type, Material: Bronze (for

upto 65 mm), cast iron (for above 65), pressure rating : PN-16
(minimum) Joint: flaged type.

a) 200 mm dia Each 1.00

b) 65 mm dia Each 1.00
19 PRESSURE SWITCH
Supply and fixing of pressure gauge and accessories as per Each 3.00
specification. Type Adjustable. Capacity range: 0-16 bar. Operation:
Cut in & cut out & 15 mm dia as spd.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
20 PRESSURE GAUGE
Supply and fixing of pressure gauge and accessories as per
specification. Type Direct. Reading dial type: Capacity range 0-35
bar. Dial size : 50 mm
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

a) 100 mm dia Each 5.00

21 Pressure Reducing valve The components shall be manufactured and

tested in UK/USA/Germany/Japan/France.

a) 40 mm dia Each 56.00

22 Pipe Works (Black steel Pipe) :

Supply & fixing in position black steel MS pipe bearing code No-40
(Heavy class) complete with fittings (Heavy class) such as Elbows
Bends. Tees, Reducers, Union, Flanges etc welded as required and
clamps, hanger, supports, dash fasteners, bolts, nuts, rubber
insertions/ compressed asbestos gasket etc. Including threading
screwing welding wherever required. cutting and making good the
walls and floors wherever required, complete in all respect. Pipe
works include painting & underground pipe anti –corrosive
treatment.
a) 200 mm dia M 100.00

b) 150 mm dia M 600.00

c) 100 mm dia M 600.00

d) 80 mm dia M 200.00

e) 65 mm dia M 300.00

f) 50 mm dia M 100.00

g) 40 mm dia M 400.00
h) 25 mm dia M 100.00

23 Electrical work for Fire Pump

Supply and installation single/multi core pvc insulted pvc sheathed

electrical cable, copper coductor size as per drawing and direction

a) 1 x 120 rm NYY M 300.00

b) 1 x 50 rm NYY M 100.00
c) 1 x 25 rm NYY M 100.00
24 Portable fire Extinguisher
Supply and fixing of portable and hand operated multipurpose fire
extinguisher as per following specification

a. CO2 Type
Supply and fixing of CO2 type fire extinguisher. Consisting of brand Each 300.00
new high pressure steel Cylinder bearing standard mark and having
the approval of explosive controller. Valve, Internal discharge tube,
high pressure discharge hose, non conducting horn, Suspension
bracket, Fully charged fixed with brass screws including cutting and
making good the walls where ever required 5 kg capacity
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

b. ABC Dry Powder Type.

Supply and fixing 5 kg ABC dry powder type fire extinguisher Each 300.00
consisting of brand new high pressure steel cylinder bearing standard
mark an having the approval of explosive controller, valve, discharge
tube, discharge hose, non conducting horn. Suspension Bracket,
Fully charged fixed with brass screws including cutting and making
 good the walls where ever required

The components shall be manufactured and tested in

UK/USA/Germany/Japan/France.

25 Fire Alarm Master Panel :

Supply and Installation of addressable fire alarm master panel with Set 2.00
battery power supply and other accessories panel description is
following Microprocessor baded system fire alarm in less than 1 sec.
capcity of 500 addressable device 4 loop intelligent detection
circuits, upto 250 Device per loop 5” LCD Display 320 x 240 DPI
Resolution 15 LED statue indicators UL/FM/CE certified. The
components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

26 Fire Alam Sub Panel :

Supply and Installation of addressable fire alarm sub panel UL / Set 4.00
FM / CE certified. The components shall be manufactured and tested
in UK/USA/Germany/Japan/France.

27 Intelligent Heat Detector

Supply & Installation of addressable Heat detect for as spd Set 30.00

28 Supply & installation of Intelligent photo electric smoke detector as Set 550.00
spd.

29 Supply & Installation of addressable manual Call Point as spd. Set 80.00

30 Supply & Installation of Fire Alarm Bell/Audio/Visual Sounder as Set 80.00

spd
31 Supply & Fixing of Supervised out putmodule asspd. Set 30.00

32 Supply & fixing of Exit sign as spd. Set 120.00

33 Supply & fixing of emergency light as spd. Set 120.00

34 Supply & fixing of short circuit isolator module as spd. Set 40.00

35 Supply & fixing of Input/Out put module as spd. Set 20.00

36 Supply & fixing of BMS Interface as spd. Set 1.00

37 Supply & fixing of Graphics soft ware as spd. Set 1.00

38 Supply & fixing of Computer accessories as spd. Set 1.00

39 Supply & fixing of Cable work for alarm System

a) Power Cable 3 x 2.5 mm2 NYY M 300.00

b) Fire Cable 2 x 1.5 mm2 M 10000

40 PVC Conduit.
Supply and fixing of following diameter PVC conduit for running
electrical cables from control conduit for running electrical cables
from control console to pumps for operation of the pumps
a) 50 mm dia M 200.00
b) 25 mm dia M 10000

41 PUBLIC ADDRESS SYSTEM CONTROLLER

Supply and Installation of Public Adress System of Compliant with Each 1.00
standards for emergency sound system 6-zones system controller
expanded up to 60 zones Built-in 240W booster Amplifier.12
Business and emergency control inputs and outputs Up to 255
messages can be stored in the internal 16 MB flash ROM Heart of
the Plena Voice Alarm System Rated output: 240 W, Max. 360 W
Frequency response: 60 Hz-18, 000 Hz Rack Building: Rack
mounting kit included Data Format: WAV-file, 16-bit PCM, mono
Data Retention Time: > 10 years Weight: 15 kg The components
shall be manufactured and tested in
 UK/USA/Germany/Japan/France.

42 Ceiling Speaker
Supply and Installation of Suitable for speech and Flush-mounting in Each 400.00
ceiling cavity Easy to install, Simple power setting Unobtrusive in
virtually all interiors Complies with International installation and
safety Regulations Capacity : 6-9 Watt Maximum power: 9W Sound
pressure level: 94dB/86dB (SPL) Effective frequency range: 80Hz to
18kHz Rated voltage: 100V Rated impedance: 1667 ohm
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

43 Horn Speaker
Supply and Installation of Horn speaker High efficiency drivers Each 10.00
High efficiency drivers, Wide opening angle, Excellent speech
reproduction, Simple power setting, Water and dust protected to IP
65, Versatile mounting bracket, Comply with International
installation and safety regulation Max. Power: 15 W, Rated Power:
10 W (10-5-2.5 W) Effective Frequency range: 480 Hz – 5.5 k Hz
Horizontal: 160 / 50 degree, Vertical: 160/50 degree Rated input
voltage: 100 V Rated Impedance: 1000 ohm Connector: 4-wire
cable,2m long Weight: 1.4 Kg
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

44 6-ZONE CALL STATION:

Supply and Installation of Stylish 6 zone call station, intended for Each 1.00
LBBB 1990/00, Voice Alarm system Controller, Six-zone selection
keys, all-call key and momentary PTT-key, For calls, Selectable
gain, speech filter and limiter for improved intelligibility LED
indications for zone selection, fault and emergency state Call station
extension provides 7 additional zone and zone Group keys Voltage
Range: 18-24V Frequency Response: 100HZ-16 KHZ Weight: 1 Kg
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.

45 BOOSTER AMPLIFIER:
Supply and Installation of Booster Amplifier, Main Voltage: Each 4.00
110VAC-240VAC,50/60Hz, Max Mains Power Consumption: 1600
VA Sensitivity: 100V Impedance: Direct connection to line input
Rated output: 480 W, Max. 720 W Frequency response: 50 Hz-
20,000 Hz Input : 3-pin XLR,6.3mm phone jack, balanced Output:
3-pin XLR,6.3mm phone jack, balanced Impedance: 22 kOhm
Weight: 25 kg The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
46 BGM MUSIC SOURCE:
Supply and Installation of BGM Music Source unit for background Each 1.00
music DVD/CD- player for video and audio Supports MP3, JPEG,
and multi- format video outputs AM/FM tuner with 10 presets and
digital control Simulatances operation of- player and tuner
Combined DVD/CD-Player/tuner output with player priority Remote
Control System Overview Weight: 4.2 Kg
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
47 SPEAKER CABLE:

Supply and Installation of Speaker Cable alda brand cable origin (F. Coil 200.00
made)12 GA, water color as spd.

48 ACCESSORIES:

Supply & fixing of Microphone cable (F/Made) Cat-5 & others Set 1.00
1,500 VA UPS as spd.

49 Excavation in any soil upto 1.5 metre depth for Cable and pipe Cum 120.00
tranches as sdp.

50 Making embankments underground pipe tranches as sdp. Cum 100.00

51 TASTING, COMMISSIONING, BALANCING AND TRIAL RUN :

Testing, Commissioning, training trial run & balancing of the fire Job 1.00
 hydrant. system, fire alarm system and Public address system shall
be carried out as per specification and recommendation of the
manufacturer equipment and relevant fire fighting standard.

Grand Total Tk.

In words TK.. .......................................................................................................................................................................

SIGN & SEAL OF TENDERER

Name of works : Supply, installation, testing and commissioning of Power Saving System for under
construction of Market at Savar, Cantonment board, Dhaka.
S.N description unit Qnt. Unit rate amount
.
1. IP FIXED BOX CAMERA : 182 pcs

 IR Waterproof Network Camera

 Externally adjust Zoom/Focus on bottom
 Built-in 4~9mm vary-focus lens, (2.8~12mm lens is optional)
 42PCS 5mm IR LEDs, 40 meters IR distance
 High sensitivity, high S/N ratio CMOS sensor
 Advanced H.264 compression, Support D1 video resoduliton
encoding
 Support duel streams, network storage
 Built-in Web Server makes it possible for users to visit camera
through IE browser
 Adjust the stream and frame rate according to the bandwidth
 Support video lost, mobile detection, and sensor alarm function
 Support self connection to the internet when disconnection happens
 Support 10 users to visit the camera at the same time

 Support remote system upgrade function

 Compatible SDK and client software

Brand: New Surway/Taiwan/Axis /Sweden/ UK/USA/Germany/Japan/

France.

2. IP PTZ HIGH SPEED CAMERA : 08 pcs

network PTZ dome camera

1/3” 2Megapixel progressive CMOS

 H.264 & Dual-stream video encoding

 18x optical zoom, 12x digital zoom, Built-in 4.70mm～84.6mm

lens

 IR distance 150M; Multiple languages for OSD menu, English,

Spanish etc

 PWM function, intelligent IR illumination

 power consumption is variable, dependent the zoom factor

 Support ambient light detection, IR Illumination On 1-15 grade

selectable

 Dome ID, baud rate, communication protocol can be set via

the controller

 Supported Protocols : Pelco-D/P; Others on special request

Brand: New Surway/Taiwanor Axis /Sweden/ UK/USA/Germany/

 Japan/ France.

3. NVR: Can connect IP camera, IP speed dome camera and DVS;

support Onvif protocol;

Compatible with main brand IP cameras: AXIS, SONY, 06 pcs

Panasonic, SANYO, BOSCH, SAMSUNG, Honeywell, VIVOTEK,
HIKVISION, DAHUA, Histream, Grandstream, TOPSEE, Launch,
WISION, HYVISION, WAPA etc.;

Support megapixel HD network video preview, storage and

playback;

Click any area and zoom in or zoom out on the image by mouse;

Support digital zooming under preview and playback modes;

Support search, playback and backup by event;

Support 4ch playback simultaneously.

Multi-Language selectable:

English, Spanish, Italian, French, Russian, Persian, Japanese,

Chinese, Traditional Chinese, Polish, Thai, Hebrew, Dutch ,
Kazak

Support remote view with Windows Mobile Phone (Windows

mobile \ Symbian \ Iphone \ Blackberry \ Android)

Brand: New Surway/Taiwanor Axis /Sweden/ UK/USA/Germany/

Japan/ France.

4.a ACCESSORIES : 24 pcs

2 TB HDD

Brand : Western Digital/ Samsung/HTC/tosiba/rangs

4.b Supply, installation, testing and commissioning of 40” HD LED monitor, 06 pcs

Brand : Sony/Samsung/Walton/tosiba/rangs

5.a Cable and conduit 21000 M

Supplying and laying of 4 pair Category 6 UTP cable in
existing/surface/recess steel/PVC conduit or underground GI conduit.
The cable shall consist of 23 AWG solid bare copper conductors,
polyolefin insulation and with end termination as per the specification
and required hardware with end connectors to devices. The cable
should have flexible jacket and ripcord for easy strip ability.
Brand: New Surway/Taiwan/Axis /Sweden/ UK/USA/Germany/Japan/
France/ Pandwidth /Dlink/Tplink

5.b Power Cable : 1*1.5 rm 3wire double coated 12000 m

Brand :BRB /Paradise / Transtec/supersign

5.c Optical Fiber 4-Core (Fiber to Data) in meter 1500 m

Brand: New Surway/Taiwan/Axis /Sweden/ UK/USA/Germany/Japan/
France.
5.d Supply, laying & fixing of PVC Pipe :1"/1.25"/1.50"/2"/2"+ as required 15000 m

7.a OTHER ACCESSORIES 14 set

Supply, installation, testing and commissioning of Gigabit media
converter to convert 10/100/1000BASE-TX ethernet twisted-pair signals
to 100/1000BASE FX fast ethernet fiber signals and Convert
100/1000BASE FX fast ethernet fiber signals to 10/100/1000BASE-TX
ethernet twisted-pair signals support full duplex ethernet mode, with
two connectors one for transmission and other for reception.

Brand: New Surway/Taiwan/Axis /Sweden/ UK/USA/Germany/Japan/

France/ Lilin/ Taiwan or Axis /Sweden /D-link
7.b Supplying and fixing of suitable port Managed/Unmanaged Switch 14 Nos.
4port/8port/16port/24port (Layer 2 or Layer 03 Switch), Layer 2

7.c 4/8/16/24-Port 10/100/1000 BaseT(X) or 1000 BASE (SX/FX), Layer–3 1 Nos.

19” Industrial Size,Internal Power Supply

7.d Supplying and fixing of suitable port Switch 4port/8port/16 port/24port 30 Nos.
10/100 Base T(X)
8. 10 kVA Online UPS with minimum 30 minute battery backup With true 01
220V AC (+-1% user selectable)sine wave, Online Double
conversion,0ms Transfer time, Over load capacity of 110% for 1
minute,125% for 15 sec & 150% for 1sec.
Protection Against Low Battery, Short circuit, Surge and Spike

Brand: New Surway/Taiwan/Axis /Sweden/ UK/USA/Germany/Japan/

France/:East/Kstar/Micro Power

9 Fiber Optical Patch Cord’s 200 pcs

10 Patch Cord Splitter 100 pcs

11 Two Pin Sockets with MK box 350 set

12 RJ 45/Cat 6 connector Brand: Pandwidth /Dlink/Tplink 600

Power Adapter 2 Amp 250 pcs

13
HP 8300/3330 MT/equivalent Desktop pc with original OS for 01 set
14 monitoring

15 9u Rack for switch mounting 15 set

16. Cabling and Device Mounting 1500 m

0
17. Installation Commissioning and Testing 01 lot

Grand Total Tk.

In words TK.. .......................................................................................................................................................................

SIGN & SEAL OF TENDERER

 Section . Bill of Quantities

Name of works : Supply, installation, testing and commissioning of solar for under construction of
S.N. description Market at Savar, Cantonment board, Dhaka. unit Qn.t Unit amount
y
1. Solar Panel: Supply, Installation, Testing & commissioning of Solar 30kwp KW
Panel with all necessary fittings. The components shall be P
manufactured and tested in UK/USA/Germany/Japan/France.
2. Inverter/charger with Charge controller: Supply, Installation, Testing 30KW 01
& commissioning of hybrid Bi-Directional charge controller (built-in
MPPT) with all necessary fittings. The components shall be
manufactured and tested in UK/USA/Germany/Japan/France.
3. Storage Battery: Supply, Installation, Testing & commissioning of 200AH 60
Storage of AGM Battery with all necessary fittings. The components
shall be manufactured and tested in UK/USA/Germany/Japan/ France.
4. Supply and installation of DC Combiner Box for PV Array with 01
necessary protection devices. European Standard
5. Supply and installation of AC Disconnect Box for Loads & Grid Input 01
with necessary protection devices. European Standard
6 Supply & installation of steel structure made of hot dip galvanized 01 job
MS Angles for panel, including civil work.
7. Supply and installation of DC & AC Cables (solar cable), as per site 01 job
and system.
8. Supply and installation of System Control Panel for monitoring & 01 Nos.
Controlling all devices for complete functionality of the system.
9. Supply & Installation of Earthling Equipments 01 job
10. Testing & Commissioning of Solar Power System 01 job

Grand Total Tk.

In words TK.. .......................................................................................................................................................................

SIGN & SEAL OF TENDERER

 Section . Bill of Quantities

Name of works : Supply, installation, testing and commissioning of Plumbing system for under
SI Description Quan Dhaka.
construction of Market at Savar, Cantonment board, Unit Rate Amount
t
1 Supplying, fitting and fixing European type glazed porcelain commode "S" type 465
x 340 x 415 mm in size, approximately 14 kg by weight, plastic seat cover and
preparing the base with cement concrete and with wire mesh or rods, if necessary,
in all floors including making holes wherever required and mending good the
damages and fitting, fixing finishing etc. complete with all necessary fittings and
connection approved and accepted by the Engineer. or BISF (code no- 104/104-
A)/rak
White
105 each
2 Supplying, fitting and fixing European type glazed porcelain low-down, capacity 10
liter, 490 x 190 x 350 mm in size, approximately 14 kg by weight, on walls by
screws and F.I. bar clamps, rowel plugs, making holes wherever required and
mending good the damages and fitting, fixing finishing etc. complete with all
necessary fittings and connection approved and accepted by the Engineer.
White
105 each
3 Supplying, fitting and fixing European type glazed porcelain Combi closet, 700 x
410 x 795 mm in size, approximately 34.5 kg by weight, plastic seat cover and
preparing the base with cement concrete and with wire mesh or rods if necessary,
in all floors including making holes wherever required and mending good the
damages and fitting, fixing, finishing etc. complete with all necessary fittings and
connection approved and accepted by the Engineer. (BISF Item No. 118/418 or
equivalent)/rak
White
50 each
4 Supplying, fitting and fixing Bangladesh pattern 560 x 290 x 270 mm long pan,
approx. 7.1 kg by weight, made of Vitreous China/ BISF/rak and preparing the base
of pan with cement concrete and with wire mesh or rods if necessary in all floors
including making holes wherever required and mending good the damages and
fitting, fixing, finishing etc. complete with all necessary fittings and connection
approved and accepted by the Engineer.
White
40 each
5 Supplying, fitting and fixing white glazed vitreous W/H Wash Basin 580 x 445 x 235
mm size, approx. 14 kg by weight including fitting, fixing the same in position with
heavy type C.I. Brackets. 30 mm dia PVC waste water pipe with brass coupling (not
exceeding 750 mm in length), basin waste with chain plug including making holes in
walls and floors and fitting with wooden blocks, screws and mending good the
damages, finishing etc. all complete approved and accepted by the Engineer.
White
150 each
6 Supplying, fitting and fixing 490 x 385 x 290 mm in size European type glazed
vitreous standing bowl urinal, approx. 8.0 kg by weight including fitting, fixing the
same in position after making holes in walls and floors, providing 32 mm dia plastic
waste pipe with brass coupling up to grading below, 12 mm dia plastic connection
pipe with brass coupling, 12 mm dia brass stop cock including mending good the
damages with cement mortar (1:4) etc. all complete approved and accepted by the
Engineer.
White
85 each
7 Supplying, fitting and fixing of 450 x 350 mm size and 5 mm thick unframed super
quality mirror with hard boards at the back with all necessary fitting including
135 each
making holes in walls and mending good the damages with cement mortar (1:4) etc.
all complete approved and accepted by the Engineer. (Made in Japan or equivalent)
8 Supplying, fitting and fixing super quality 600 x 125 mm white glass (plate) shelf 135 each
 having 5 mm thickness with fancy C.P. brackets, screws and frames including
making holes in walls and mending good the damages with cement mortar (1:4) etc.
all complete approved and accepted by the Engineer.
9 Supplying, fitting and fixing super quality C.P. Towel rail of 600 mm long and 20 mm
in dia with C.P. holder including making holes in walls and mending good the
190 each
damages with cement mortar (1:4) etc. all complete approved and accepted by the
Engineer.
10 Supplying, fitting and fixing toilet paper holder of 150 x 150 x 126 mm size including
making holes in walls and mending good the damages with cement mortar (1:4) etc.
130 each
all complete approved and accepted by the Engineer.

11 Supplying, fitting and fixing standard size CP soap tray including making holes in
walls and mending good the damages with cement mortar (1:4) etc. all complete
approved and accepted by the Engineer.
C.P. soap tray
140 each
12 Supplying, fitting and fixing 100 mm dia stainless steel floor grating in traps or in
drains including making holes in walls/floors and mending good the damages with
270 each
cement mortar (1:4) etc. all complete approved and accepted by the Engineer.

12 Supplying 100 mm inside diameter best quality uPVC rain water down pipe fitting,
fixed in position with head and shoes, bends, min.20 mm width F.I. Bar clamp and
nails, and including all accessories such as round grating/domed roof grating 75 rm
bands, sockets approved and accepted by the Engineer.

14 Supplying 50 mm inside dia HCI soil, waste and ventilation pipe each piece having
over length 1800 mm, thickness 6.5mm, spigot diameter 80 mm, weight min 12 kg
fitted and fixed in position with sockets thickness min 8.5 mm, internal depth min 68
mm, bead's outside diameter min 90 mm, ears flange length min 150 mm, caulking
clearance min 10 mm produced in foundry grade pig iron as per BSTI approved 45 rm
manufacturer standard fitting and fixing in position including head and shoes bends
made of minimum 20 mm x 3 mm F.I. bar or equivalent, trap, tee, offset, clamps and
nails etc. complete in all floors approved and accepted by the Engineer.

15 Supplying 100 mm inside dia HCI soil, waste and ventilation pipe each piece having
over length 1800 mm, thickness 6.5 mm, spigot diameter 117 mm, weight min 24.85
kg fitted and fixed in position with sockets thickness min 6.5 mm, internal depth min
75 mm, bead's outside diameter min155 mm, ears flange length min 208 mm,
caulking clearance min 8 mm produced in foundry grade pig iron as per BSTI 30 rm
approved manufacturer standard fitting and fixing in position including head and
shoes bends made of minimum 20 mm x 3 mm F.I. bar or equivalent, trap, tee,
offset, clamps and nails etc. complete in all floors accepted by the Engineer.

16 Supplying 50 mm inside dia best quality uPVC soil, waste and ventilation pipe
having specific gravity 1.35 - 1.45, wall thickness 2.5 - 3.0 mm, and other physical,
chemical, thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards fitted and fixed in position with sockets,
18 rm
bends, of uPVC Pipe with all accessories such as Round grating /domed roof
grating bands, sockets etc. approved and accepted by the Engineer (length: 6000
mm each).

17 Supplying 100 mm inside dia best quality uPVC soil, waste and ventilation pipe
having specific gravity 1.35-1.45, wall thickness 3.4- 4.0 mm, and other physical,
chemical, thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards fitted and fixed in position with sockets,
25 rm
bends, with all accessories such as Round grating/domed roof grating bands,
sockets etc. approved and accepted by the Engineer (length: 6000 mm each).

18 Supplying, fitting and fixing G.I. pipe with all special fittings, such as bends, elbows,
sockets, reducing sockets, Tee, unions, jam-nuts etc. including cutting trenches
where necessary and fitting the same with earth duly rammed and fixing in walls
with holder bats and making hole in floors, walls and consequent mending good the
damages etc. all complete in all respects approved and accepted by the Engineer.

12.5 mm dia G.I. pipe with wall thickness 3.25 mm, outside diameter min 21.1 mm,
60 rm
weight 1.45 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
20 mm dia G.I. Pipe with wall thickness 3.25 mm, outside diameter min 26.6 mm,
55 rm
weight 1.90 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
25 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 33.4 mm,
45 rm
weight 2.97 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
32 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 42.1 mm,
30 rm
weight 3.84 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
 40 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 48.0 mm,
weight 4.43 kg/m, can withstand min 50 kg/cm2 hydraulic pressure. 35 rm

19 Supplying different inside dia best quality CPVC pressure pipe for water supply
having specific gravity 1.35 - 1.45, and other physical, chemical, thermal, fire
resistivity properties etc. as per BSTI approved manufacturer standards or ASTM,
BS/ISO/IS standards fitted and fixed in position with sockets, bends, with all
accessories such as Round grating/domed roof grating, bends, sockets etc.
approved and accepted by the Engineer. (length: 6000 mm each)
12 mm dia wall thickness 2.8 mm - 3.3 mm 70 rm
19 mm dia wall thickness 2.9 mm - 3.4 mm 45 rm
25 mm dia wall thickness 3.4 mm - 4.0 mm 60 rm
32 mm dia wall thickness 3.6 mm - 4.2 mm 25 rm
37 mm dia wall thickness 3.7 mm - 4.3 mm
20 rm
20 Supplying, fitting and fixing laying Pipes up to depth of invert dia R.C.C pipe having
1.83 meter in length made of stone chips with 40 mm cement joint including all
fittings and specials like plain bend, Tees, reducing sockets, junctions, door bends
cowls, anti-siphon, gasket and cement joints, making holes in walls and mending
good the damages etc. all complete approved and accepted by the Engineer.
R.C.C pipe of 150 mm dia with thickness 40mm 50 rm
R.C.C pipe of 225 mm dia with thickness 40mm 30 rm
R.C.C pipe of 300 mm dia with thickness 50mm 20 rm
R.C.C pipe of 375 mm dia with thickness 50mm
35 rm
21 Supplying, fitting and fixing G.I. Union with sealant etc. complete in all respects
approved and accepted by the Engineer.
12 mm dia G.I. Union 145 each
20 mm dia G.I. Union 120 each
25 mm dia G.I. Union 100 each
32 mm dia G.I. Union 40 each
40 mm dia G.I. Union
25 each
22 Supplying, fitting and fixing best quality G.I. gate valve with sealant etc. complete
approved and accepted by the Engineer.
12 mm brass gate valve 225 each
20 mm brass gate valve 170 each
25 mm brass gate valve 135 each
32 mm brass gate valve 80 each
40 mm brass gate valve 40 each
50 mm brass gate valve 30 each

23 Supplying different inside dia best quality uPVC pressure waste pipe having specific
gravity 1.35 -1.45, wall thickness 2.7 mm - 3.4 mm, and other physical, chemical,
thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards, fitted and fixed in position with sockets,
bends, with all accessories such as Round grating/domed roof grating bands,
sockets etc. complete approved and accepted by the Engineer.
50 mm dia uPVC Y or T - Y Cleanout 55 each
100 mm dia uPVC ‘P’ or ‘S’ trap 40 each
100mm dia Upvc "X" trap 10 each
100mm dia Upvc "U" trap 90 each
100 mm dia uPVC Y or T - Y Cleanout 35 each

24 Supplying, fitting and fixing best quality faucets etc. complete approved and
accepted by the Engineer
12 mm CP bib cock 135 each
12 mm Special quality CP bib cock 220 each
12 mm Plastic bib cock with internal brass thread
50 each
25 Supplying, fitting and fixing best quality concealed fixed sink cock etc. complete
approved and accepted by the Engineer
12 mm CP Concealed fixed cock 20 each
12 mm CP Concealed moving cock
15 each
26 Supplying, fitting and fixing CP Shower Mixture including Shower Head and faucet
with all necessary hardware and consumables approved and accepted by the 10 each
Engineer.
12 mm brass Stop Cock for Surface Mount (general quality)
85 each
27 Supplying, fitting and fixing Special/Fancy quality C.P. concealed/ Surface Angle
stop cock etc. complete approved and accepted by the Engineer.
12 mm CP surface mounted angle stop cock (general) 65 each
28 Supply and installation of 400 gallon capacity Ferro-cement water tank including
necessary hardware, fittings and consumables etc. all complete approved and 35 each
accepted by the Engineer.
29 Supplying, fitting and fixing 12 mm dia, 450 mm long Plastic flexible lead
(connection) pipe approved and accepted by the Engineer. 75 each

30 Construction and placing of R.C.C inspection pit cover (slab) with supplying and
provisions for placing, fitting, fixing 450 mm dia C.I. Man-hole cover with locking/un-
locking arrangement including concrete (1:2:4) with approx. 1% re-enforcement,
necessary earth cutting, or cleaning, side filling, curing etc. with minimum 12 mm
cement plaster (1:4) and neat cement finishing on edges and top all complete and
accepted by the Engineer.

950 x 950 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 20 each
1025 x 1025 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 12 each
1100 x 1100 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 6 each
01 set tools for plumbing (300 pcs, etc),
31. 01 set

Grand Total Tk.

In words TK.. .......................................................................................................................................................................

SIGN & SEAL OF TENDERER