Scribd
Upload
2K views1 page

Atf Wpqr-Blank v1

This document is a welder qualification record that contains details of a welder's test including: the welder's name and identification number, the date, welding process used, materials welded, filler metal details, welding variables, test positions, mechanical and non-destructive testing results, and certification that the test was performed according to the proper code or specification. It provides a record of the welder's qualifications to perform certain welding jobs.

Uploaded by

lth770310
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Atf Wpqr-Blank v1

This document is a welder qualification record that contains details of a welder's test including: the welder's name and identification number, the date, welding process used, materials welded, filler metal details, welding variables, test positions, mechanical and non-destructive testing results, and certification that the test was performed according to the proper code or specification. It provides a record of the welder's qualifications to perform certain welding jobs.

Uploaded by

lth770310
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WELDER and WELDING OPERATOR PERFORMANCE

QUALIFICATION RECORD

Welder’s Name: ATF No: Test No.


Welder’s SS No. XXX-XX- Date: Reference WPS No:

VARIABLE QUALIFICATION TEST DETAIL QUALIFICATION RANGE*


Code or Specification Used:
Welding Process and Type:
Manual Semiautomatic Manual Semiautomatic
Mechanized Automatic Mechanized Automatic
Backing: Used Not Used Required if used
Base Metal Spec/P or M-Number
Plate/Pipe Thickness – Groove Plate Pipe Thick.
Plate/Pipe Thickness – Fillet Plate Pipe Thick.
Pipe/Tubular Outside Diameter – Groove
Pipe/Tubular Outside Diameter – Fillet
Filler Metal Specification No.
Classification No.
F No.
Diameter
Consumable Insert Yes No
Penetration Enhancing Flux Yes No
Deposited Weld Metal Thickness
Current/Polarity & Current Range Type/Polarity:
Range: Amperes
Metal Transfer Mode (GMAW or FCAW)
Torch Shielding Gas Type: Flow:
Root Shielding Gas NA Type: Flow:
Position(s) Test Position(s) (1G, 2G, etc.): Qualified Position(s) (F, H, V, O, or All)

Vertical Progression Uphill Downhill Uphill Downhill


* NOTE: Insert NA for Variables that are identified as Non-essential in the Code or Specification used for the Performance Qualification Test
MECHANICAL TEST RESULTS
Type And Figure No. Results Type And Figure No. Results

Guided mechanical Testing Conducted By: Date:


NONDESTRUCTIVE EXAMINATION RESULTS
Radiographic Results: Report No.
Radiographic Testing Conducted By:

Welding Witnessed By: Visual Inspection: Pass Fail (reason )


We certify that the statements in this record are correct and the test welds were prepared, welded and tested in accordance with
the requirements of: AWS D1.1- , AWS B2.1- Other:
Date Qualified: ATF Name and Number:
Signed By: CWI No.

ATF WPQR Blank Form 2010-04-15 1

You might also like