C e l l u l a r ALAR M

TG-7FS C o mm u n i c a t o r
for 3g/4g networks

C o m m erc i a l F i re

P R O D U C T F E AT U R E S

Meets UL 864 requirements for sole, primary or backup path

communications.

Provides RMR protection by leveraging technology that operates

on 3G/4G networks.

Supports listen-in, two-way voice verification over cellular.

Minimizes false alarms by providing dual paths for self-tests.

Falls back to 2G (GSM) if a 3G/4G network isn’t available.

The Telguard TG-7FS is the ideal cellular alarm communications solution

for commercial fire systems. The TG-7FS transmits alarm signals from
the fire panel over the digital cellular network to the designated
monitoring station.

Compliant with the 2010 Edition of NFPA 72, the TG-7FS can serve as
the sole communications path for the fire alarm system. It replaces
all of the landlines currently dedicated to the master control unit. On
average, cellular monitoring costs the end user significantly less than
a dedicated landline. For each landline replaced with a TG-7FS, the
monthly communications bill decreases.

By being able to signal failures to the central station within five

minutes of an outage, the TG-7FS can be installed as the sole path for
commercial fire installations.  For existing installations, all landlines
can be swapped for a single TG-7FS because of the new five minute
supervision mode.

The TG-7FS can also be installed as a backup path and upgraded to sole
path at a later date.

Telguard Online Telguard Cellular Service Advanced Reliability

Telguard makes adopting cellular Telguard Cellular Service provides • Features SMS backup to reduce
easy with a secure Internet portal.  nationwide digital cellular network false alarms, providing self-tests
The straightforward web interface coverage for all Telguard units. using SMS if GPRS fails.
allows security dealers and central Telguard’s Communication Center • Automatic self-tests with central
stations to quickly and efficiently is UL compliant and provides station notification ensure the
access Telguard based services 24/7.  seamless connectivity between the cellular system is operating.
This advanced tool has multi-level alarm panel, the Telguard family
• Available relay output for tripping
user authorization and provides of products and the central station.
the alarm control panel when a
total account management of Telguard Technical Support provides
trouble condition occurs.
UL Listed Telguard cellular alarm a single point of contact for both
communicators. cellular service and Telguard product
questions.
 C e l l u l a r ALAR M
TG-7FS C o mm u n i c a t o r
for 3g/4g networks

Power

• Transmit power: 1.0W-2.0W

(maximum allowable).
• Power Consumption:
60mA (Standby)
250mA (Transmission).
• Transformer: 12VAC, 800mA
UL listed plug-in.
Telguard technology allows full data reporting for unlimited
point-to-point signal details and maximum transmitting power for
Radio Transceiver
superior in-building penetration.
• 3G cellular radio.
• GSM 850MHz: Class 4 (2 watts). Telguard products are easy to install, economical, and UL Listed.
• GSM 1900MHz: Class 1 (1 watt).
• UMTS WCDMA FDD 850/1900MHz. Accessories
• Antenna: 9” dipole with 2dBi gain,
• ACD 12, ACD 35, ACD 50, ACD 100:
12 ft of cable and universal mounting
12/35/50/100 feet of low loss, high performance cable.
bracket.
• HGD-0: High gain directional antenna.
• FCC part 15, 22, 24 and 68 compliant.
• EXD-0: External antenna.

Physical Details

• TG-7FS: 7.5” H x 11.5” W x 3.5” D.

• Shipping Weight: 8lbs.
• Operating Environment:
0°C to +50°C; up to 95% humidity
(non-condensing).

UL Listings
Standard Features Commercial Fire Commercial Burglary Residential
864 • Control units & 365 • Police Station 985 • Household fire
• Full data reporting. accessories for fire connected burglar warning systems
• Automatic self-test (5 min. & daily). alarm systems alarm units and
systems
• Power supply with battery harness. 1610 • Central station burglar
• Locking, red metal enclosure. alarm units;
• Two programmable supervisory Line security servcies

trip outputs. * For the most current product specifications and UL Listings visit www.Telguard.com.
• Alarm format support for SIA2,
Contact ID, pulse (3x1, 4x2),
modem IIe, & IIIa2 , DMP.
• Telephone line monitor built-in,
with Standard Line Security.

Telguard, a Division of Telular Corporation • 2727 Paces Ferry Road SE • Suite 1-800 • Atlanta, GA 30339 • USA
800-229-2326, Option 5 • www.Telguard.com • Copyright ©2012 Telular Corporation • All Rights Reserved

042012RevD