Scribd
Upload
78 views2 pages

Specification Sheet : K B Electronics

The document provides the specifications for a KB Electronics switch mode power supply model PS2410A. The power supply has an input of 230V AC, outputs 24V DC at 10A, and has protections for overloads, short circuits, and over voltage. It has a startup time of less than 1.5 seconds, holds power for 10ms without AC, and operates between 0 to 50 degrees Celsius with less than 95% humidity.

Uploaded by

Sourav Sain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views2 pages

Specification Sheet : K B Electronics

The document provides the specifications for a KB Electronics switch mode power supply model PS2410A. The power supply has an input of 230V AC, outputs 24V DC at 10A, and has protections for overloads, short circuits, and over voltage. It has a startup time of less than 1.5 seconds, holds power for 10ms without AC, and operates between 0 to 50 degrees Celsius with less than 95% humidity.

Uploaded by

Sourav Sain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

K B ELECTRONICS

SPECIFICATION SHEET
===================
SWITCH MODE POWER SUPPLY

MODEL : PS2410A

INPUT
* I/P : 230V AC, 1-Ph
* Frequency : 47-63Hz
* Range : 180-270V AC
* Fuse Protection. : Yes
* I/P MOV : Yes
* Soft Start : Yes
* Inrush current : 46A@230V AC
* AC current : 3.5A@230V AC

OUTPUT
* Nominal Voltage : 24V DC
* Voltage Range : 24-28V
* Rated Current : 10A
* Line Regulation : +/- 1%
* Load Regulation : +/- 1%
* Ripple Max : +/- 1% (P-P)
* Noise Max : +/- 1% (P-P)
* Protections
: a) Overload Protection auto recovery type:102-105%
b) Short circuit protection auto recovery type:Yes
c) Over Voltage Protection Latching type:105-110%
* Current Limit. : Yes
* Start up time : <1.5sec
* Hold up time : 10ms@230V AC

ENVIRONMENTAL
* Operating temperature 0 to 500 C.
* Humidity : < 95% Rh
* Enclosure IP 20 Protection

GENERAL
* Isolation : Input to Output – 1.5KV
Input to Earth – 1.5KV
Output to Earth- 500V
* MTBF : 50K Hrs to MIL
INDICATIONS LED : a) Input OK
b) Output OK
c) Output OVP

MECHANICAL
* Dimension : approx. 195W X 130D X 95H mm
* Cooling type : Fan cooled
* Weight : approx. 1.4 Kgs

OPTIONAL
* Redundancy by external diode.
* Potential Free Contact – Alarm contact
* Programmable by external signal – voltage & current
* Remote ON/OFF
* With Digital Voltmeter & Currenmeter

You might also like