Data Sheet
Data Sheet
2010
Product Guide
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND
SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed
herein is provided on an "AS IS" basis, without warranties of any kind.
This document and all information discussed herein remain the sole and exclusive property of Samsung
Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property
right is granted by one party to the other party under this document, by implication, estoppel or other-
wise.
Samsung products are not intended for use in life support, critical care, medical, safety equipment, or
similar applications where product failure could result in loss of life or personal or physical harm, or any
military or defense application, or any governmental procurement to which special terms or provisions
may apply.
For updates or additional information about Samsung products, contact your nearest Samsung office.
All brand names, trademarks and registered trademarks belong to their respective owners.
                                                                 -1-
                                                                                                        May. 2010
1 2 3 4 5 6 7 8 9 10 11
                            K 4 B X X X X X X X - X X X X
  SAMSUNG Memory                                                                                        Speed
  DRAM                                                                                          Temp & Power
  DRAM Type                                                                                     Package Type
  Density                                                                                             Revision
  Bit Organization                                                                        Interface (VDD, VDDQ)
                                                                                           # of Internal Banks
      2. DRAM : 4
                                                 8. Revision
                                                      M    : 1st Gen.
      3. DRAM Type                                    A    : 2nd Gen.
            B : DDR3 SDRAM                            B    : 3rd Gen.
                                                      C    : 4th Gen.
                                                      D    : 5th Gen.
      4. Density                                      E    : 6th Gen.
                                                      F    : 7th Gen
            51 : 512Mb
                                                      G    : 8th Gen
            1G :   1Gb
                                                      H    : 9th Gen
            2G :   2Gb
            4G :   4Gb
                                                 9. Package Type
                                                      Z    :   FBGA (Lead-free)
      5. Bit Organization
                                                      H    :   FBGA (Halogen-free & Lead-free)
            04 : x 4                                  J    :   FBGA (Lead-free, DDP)
            08 : x 8                                  M    :   FBGA (Halogen-free & Lead-free, DDP)
            16 : x16
                                                -2-
                                                                                                                                May. 2010
                                         K4B4G0446A    HC(L)F8/H9/K0               1G x 4
                                                                                                 1.5V
                                         K4B2G0846A    HC(L)F8/H9/K0              512M x 8                  78 ball
     4Gb A-die          8Banks                                                                              FBGA       Now
                                         K4B4G0446A    HY(L)F8/H9/K0               1G x 4
                                                                                                 1.35V
                                         K4B2G0846A    HY(L)F8/H9/K0              512M x 8
                                         K4B4G0446B    MC(L)F7/F8/H9               1G x 4                   78 ball
  DDP 4Gb B-die         8Banks                                                                   1.5V                  Now
                                         K4B2G0846B    MC(L)F7/F8/H9              512M x 8                  FBGA
                                                                            -3-
                                                                                                                              May. 2010
                     M X X X B X X X X X X X - X X X
Memory Module
DIMM Type
Data bits                                                                                                                        Speed
DRAM Component Type                                                                                                        Temp & Power
Depth                                                                                                                      PCB Revision
# of Banks in Comp. & Interface                                                                                                Package
Bit Organization                                                                                                  Component Revision
    7. Bit Organization
        0 : x4
        3 : x8
        4 : x16
                                                                   -4-
                                                                                                                                                  May. 2010
                                                                                                                            78 ball
  1Gx 64      8GB     M378B1G73AH0           CF8/H9/K0*   B(2Rx8)       512M x 8 * 16 pcs   4Gb   A-die      8        2               30mm     Now
                                                                                                                            FBGA
                                                                                                                            78 ball
  1Gx 72      8GB     M391B1G73AH0           CF8/H9/K0*   E(2Rx8)       512M x 8 * 18 pcs   4Gb   A-die      8        2               30mm     Now
                                                                                                                            FBGA
* NOTE : K0(1600Mbps) will be available by ES level
                                                                                                                            78 ball
  1Gx 72      8GB     M391B1G73AH0            YF8/H9      E(2Rx8)       512M x 8 * 18 pcs   4Gb   A-die      8        2               30mm     Now
                                                                                                                            FBGA
                                                                                 -5-
                                                                                                                                             May. 2010
                                                                                                                      78 ball
  1Gx 64      8GB      M471B1G73AH0          CF8/H9    F(2Rx8)   512M x 8 * 16 pcs   4Gb   A-die      8        2                  30mm       Now
                                                                                                                      FBGA
                                                                                                                     78 ball
  1Gx 64      8GB      M471B1G73AH0          YF8/H9   F(2Rx8)    512M x 8 * 16 pcs   4Gb   A-die      8        2                30mm       Now
                                                                                                                     FBGA
                                                                          -6-
                                                                                                                                   May. 2010
                                                                    -7-
                                                                                                                                            May. 2010
                                                                             -8-
                                                                                                                                  May. 2010
                                                                 -9-
                                                                                                                                             May. 2010
                                                                           - 10 -
                                                                                                  May. 2010
                                                 - 11 -
                                                                                                                                                                      May. 2010
78Ball FBGA for 1Gb E-die (x4/x8) / 1Gb F-die (x4/x8) / 2Gb C-die (x4/x8)
7.50 ± 0.10
                                                                                                                                                            0.10MAX
                                                       A
                              0.80 x 8 = 6.40
                                                           #A1 INDEX MARK
  (Datum A)               0.80 1.60          3.20
                                                                                                                  #A1       7.50 ± 0.10
                         9 8 7 6 5 4 3 2 1                                                           B
                  A
                  B
                  C
  (Datum B)
                                                              4.80
                  D
                  E                                                  0.80 x 12 = 9.60
                                                                                                                                                                       0.50 ± 0.05
                                                       0.80
11.00 ± 0.10
                                                                                                                                          11.00 ± 0.10
                  F
                  G
                  H
                  J
                  K
                                                       0.80
                  L
                  M
                  N
                                                                                                                                                                              0.35 ± 0.05
                                           (0.95)
   78 - ∅0.45 Solder ball
                                                    MOLDING AREA
 (Post Reflow ∅0.05 ± 0.05)                                                                                                                                       1.10 ± 0.10
             0.2 M A B            (1.90)
Bottom Top
7.50 ± 0.10
                                                                                                                                                            0.10MAX
                                                       A
                              0.80 x 8 = 6.40
                                                           #A1 INDEX MARK
                           0.80 1.60         3.20                                                                           7.50 ± 0.10
                                                                                                                      #A1
                         9 8 7 6 5 4 3 2 1                                                               B
                  A
  (Datum A)       B
                  C
                  D
                                                              6.00
 (Datum B)        E
                                                                                                                                                                      0.50 ± 0.05
                  F
                                                                      0.80 x 15 = 12.00
                                                       0.40
13.30 ± 0.10
                  G
                                                                                                                                             13.30 ± 0.10
                  H
                  J
                  K
                  L
                  M
                  N
                                                       0.80
                  P
                  R
                  T
                                                                                                                                                                             0.35 ± 0.05
                                           (0.95)
   96 - ∅0.45 Solder ball
                                                    MOLDING AREA
 (Post Reflow ∅0.05 ± 0.05)
                                                                                                                                                                  1.10 ± 0.10
             0.2 M A B            (1.90)
Bottom Top
                                                                                                             - 12 -
                                                                                                                                                                        May. 2010
9.00 ± 0.10
                                                                                                                                                             0.10MAX
                                                               A
              A
              B
              C
 (Datum B)
                                                                  4.80
              D
              E
                                                                               0.80 x 12 = 9.60
                                                        0.80
11.50 ± 0.10
                                                                                                                                             11.50 ± 0.10
              F
              G
              H
              J
              K
                                                        0.80
              L
              M
              N
                                                                                                                                                                         0.35 ± 0.05
                                           (0.95)
   78 - ∅0.45 Solder ball
                                                    MOLDING AREA
 (Post Reflow ∅0.50 ± 0.05)
                                                                                                                                                                  1.10 ± 0.10
            0.2 M A B             (1.90)
Bottom Top
9.00 ± 0.10
                                                                                                                                                              0.10MAX
                                                              A
              A
 (Datum A)    B
              C
              D
                                                               6.00
(Datum B)     E
              F
                                                                         0.80 x 12 = 12.00
                                                       0.40
                                                                                                                                              13.30 ± 0.10
                                                                                                  13.30 ± 0.10
              G
              H
              J
              K
              L
              M
              N
                                                       0.80
              P
              R
              T
                                                                                                                                                                          0.35 ± 0.05
                                           (0.95)
  96 - ∅0.45 Solder ball
                                                    MOLDING AREA
(Post Reflow ∅0.50 ± 0.05)
                                                                                                                                                                       1.10 ± 0.10
            0.2 M A B            (1.90)
Bottom Top
                                                                                                                      - 13 -
                                                                                                                                                                       May. 2010
9.00 ± 0.10
                                                                                                                                                            0.10MAX
                                                            A
                               0.80 x 8 = 6.40
                                                                #A1 INDEX MARK
 (Datum A)              0.80     1.60      3.20
                                                                                                             #A1     9.00 ± 0.10
                      9 8 7 6 5 4 3 2 1                                                                 B
             A
             B
             C
 (Datum B)
                                                            4.80
             D
             E
                                                                     0.80 x 12 = 9.60
                                                     0.80
11.50 ± 0.10
                                                                                                                                     11.50 ± 0.10
             F
             G
             H
             J
             K
                                                     0.80
             L
             M
             N
                                                                                                                                                                        0.35 ± 0.05
  78 - ∅0.45 Solder ball
(Post Reflow ∅0.50 ± 0.05)
                                                                                                                                                                 1.40 ± 0.10
          0.2 M A B
Bottom Top
10.00 ± 0.10
                                                                                                                                                             0.10MAX
                                                            A
                               0.80 x 8 = 6.40
                                                                #A1 INDEX MARK
 (Datum A)             0.80      1.60         3.20
                                                                                                               #A1    10.00 ± 0.10
                      9 8 7 6 5 4 3 2 1                                                                 B
             A
             B
             C
(Datum B)
                                                            4.80
             D
             E
                                                                    0.80 x 12 = 9.60
                                                     0.80
11.50 ± 0.10
11.50 ± 0.10
             F
             G
             H
             J
             K
                                                     0.80
             L
             M
             N
                                                                                                                                                                        0.35 ± 0.05
  78 - ∅0.45 Solder ball
(Post Reflow ∅0.50 ± 0.05)
                                                                                                                                                                  1.40 ± 0.10
          0.2 M A B
Bottom Top
                                                                                                            - 14 -
                                                                                                                                                                          May. 2010
8.00 ± 0.10
                                                                                                                                                                    0.10MAX
                                                         A
                                 0.80 x 8 = 6.40
                                                                 #A1 INDEX MARK
   (Datum A)              0.80     1.60          3.20
                                                                                                                         #A1      8.00 ± 0.10
                        9 8 7 6 5 4 3 2 1                                                                   B
                 A
                 B
                 C
       (Datum B)
                                                                 4.80
                 D
                 E
0.80 x 12 = 9.60
                                                                                              11.00 ± 0.10
                                                         0.80
                                                                                                                                                     11.00 ± 0.10
                 F
                 G
                 H
                 J
                 K
                                                         0.80
                 L
                 M
                 N
                                                                                                                                                                                0.35 ± 0.05
   78 - ∅0.45 Solder ball
 (Post Reflow ∅0.50 ± 0.05)
                                                                                                                                                                         1.40 ± 0.10
           0.2 M A B
                              BOTTOM VIEW                                                                                        TOP VIEW
                                 10.00 ± 0.10
                                                          A
                                                                                                                                                                      0.10MAX
                               0.80 x 8 = 6.40
                                             3.20               #A1 INDEX MARK
  (Datum A)
                               0.80       1.60
                                                                                                                   #A1         10.00 ± 0.10
                                                                                                       B
                       9 8 7 6 5 4 3 2 1
                 A
                 B
                 C
    (Datum B)
                                                                4.80
                 D
                                                                        0.80 x 12 = 9.60
                 E
                                                        0.80
12.50 ± 0.10
12.50 ± 0.10
                 F
                 G
                 H
                 J
                 K
                                                        0.80
                 L
                 M
                 N
                                                                                                                - 15 -
                                                                                                                                                              May. 2010
Units : Millimeters
133.35 ± 0.15
                                                                                                          (4X)3.00 ± 0.1
                                           128.95
                                                                                                                                     30.00 ± 0.15
                                           N/A
      9.50
                                         (for x64)
                                                      SPD
                                          ECC
                                                                                                                           17.30
                                         (for x72)
                                                                                                        2.30
                 (2)
                2.50
54.675
                                A    B
                       47.00                                71.00                                                                    Max 4.0
                                            N/A
                                          (for x64)
                                           ECC
                                          (for x72)
                                                                                                                                   1.270 ± 0.10
                                                            2.50 ± 0.20
                         1.50±0.10
                                                                                   1.00
                2.50
Detail A Detail B
                                                                          - 16 -
                                                                                                                             May. 2010
Units : Millimeters
67.60 0.10 M C A B
                                                      63.60
                                                                                                                   Max 3.8
                                                                                                   30.00 ± 0.15
                                                       SPD
                  20.00
                                                                                         6
                                                                                                                  1.00 ± 0.10
                                     24.80
A B
                                     21.00                      39.00
          2X 1.80
       0.10 M C A B
    (OPTIONAL HOLES)
                                                                                             2X 4.00 ± 0.10
                                                                                                0.10 M C A B
0.60
                                                                               0.45 ± 0.03
                            1.65
                                        4.00 ± 0.10
                                                                           2.55
Detail A Detail B
                                                              - 17 -
                                                                                                                                                                      May. 2010
                                                                                                                                                             Units : Millimeters
                                          133.35 ± 0.15
                                                                                                              (2X)3.00
                                                  128.95                                                                                            Max 4.0
         9.76    10.9     18.92                   32.40                       18.93                  9.74
                                                                                                                                  30.00 ± 0.15
  9.50
Register
2.50
                                                                                                                          17.30
                                                                                                              2.30
                                                                                                                                                        1.0 max
                  54.675
                                   A          B
                                                                                                                                                    1.27 ± 0.10
                       47.00                                       71.00
                                                                       2.50 ± 0.20
                        5.00
                                                                                                      0.80 ± 0.05
                  2.50
                                                                                                                                                   50
                                  1.50±0.10                                                   1.00
                                                                                                                                                 0.
                                                                                                                                         R
                                                                                                                                                 2x 2.10 ± 0.15
                                                        Register
                                                                                     - 18 -
                                                                                                                                                       May. 2010
                               1. FRONT PART
                                  Outside
                                                             133.15 ± 0.2
                                                                                                                              0.65 ± 0.2
                                                                                                                                           1+0/ -0.3
                                                             130.45 ± 0.15
                 9.26                                                                29.77
                                                   11.9            31.4                                                             R0.2
                                                                                                  23.6 ± 0.15
                                                                                                                25.6 ± 0.15
                                                                                                                                                        25.6 ± 0.15
                                                                                                                                           R
                                                                                                                                            0.
                                                                                                                                               1
  4.65± 0.12
                                                                                                                                   0.15
                                                                                                                                   1.3     1
127 ± 0.12
                                                                                                                                 2
                           2
               2.6 ± 0.2
1.3
                                                                                             2 ± 0.1
                                  Inside
                                      0.4
7.45
                                                 80.78
                                                          119.29
                                                                   128.5
                 2. BACK PART
                                  Outside
                                  Inside
                                               Green Line : TIM Attatch Line
                                                                                    - 19 -
                                                                                                                                         May. 2010
                 3. CLIP PART
                          39.3 ± 0.2
                                           Upper Bending
                                            Tilting Gap
                             29.77
                                                0.1 ~ 0.3
         A
                         5
                       1.
             B                         C
                      R
0.5
132.95 ± 133.45
                                                                                         1.05
  1.27
                                                                                                39.3 ± 0.2
                                                                                                                                          D
                                                                              19 ± 0.1
19
                                                                     - 20 -
                                                                                                                                                             May. 2010
Units : Millimeters
133.35 ± 0.15
                                                         128.95
                                                                                                            C                           Max 4.0
                   9.76              20.92               32.40                                    20.93              9.74
    18.75 ± 0.15
Register
                                54.675
                                             A     B
                                                                                                                                        1.0 max
                                 47.00                                                    71.00
 12.60
1.27 ± 0.10
SPD/TS
                            18.10
                                                                            2.50 ± 0.20
                         5.00
                                                                                                           0.80 ± 0.05
                                                                                                                                           9.9
                                                                                                                                                       0.6
                                                  3.80
                                                                                                            0.2 ± 0.15
                                1.50±0.10
                                                                                                                                   50
                                                                                                                                 0.
                                                                                                  1.00
                                                                                                                                 R
2.50
                                                                                                                         VTT
                                                                                                                         VTT
                   VTT
SPD/TS
                                                                                                  - 21 -
                                                                                            May. 2010
1. FRONT PART
Outside
130.45
67
                                                                         14.3
                                             Driver
                                             IC(DP:0.18mm)
Inside
                                     Driver
                                     IC(DP:0.18mm)
2. BACK PART
Outside
                                     Driver
                                     IC(DP:0.18mm)
Inside
                                             Driver
                                             IC(DP:0.18mm)
                                                         - 22 -
                                                                                                                                                      May. 2010
3. CLIP PART
                                                                                             9.16 ± 0.12
                                                    9.16
      4. ASS’Y VIEW
          Reference thickness total (Maximum) : 7.71 (With Clip thickness)
                                                                                                           7.71
* Dimension Index
                                                           Mono                                                    DDP
                                                                                                                                               Note
                                           Min.            Typ.     Max.              Min.                         Typ.                 Max.
A - 43.9 - - 44.4 -
C - 5.8 - - 6.3 -
- 23 -