5-25GS Series
Submersible Pumps
Submittal Data MODEL : 5GS07412C
Hydraulic Data Motor Data 4 Inch Submersible Standard Capacity
Maximum Flow Flow at Duty Point Maximum TDH TDH at Duty Point Voltage / Phase / Enclosure Model
9 US g.p.m. 5 US g.p.m. 165 m 105 m 230 V 3 Phase 5GS07412C
Submittal Prepared for: Job:
Engineer: Contractor:
Submittal Prepared by: Company:
Submittal Date: 7/26/2019 Approved by: Date:
Engineering Data Standard Equipment / Capability:
Pump Code: 5GS07412C FEATURES
Pump Size: 4" Standard Capacity Powered for Continuous Operation: All ratings are within the working limits of the motor
as recommended by the motor manufacturer. Pump can be operated continuously without damage
Pump Max Horsepow er: 0,00 kW to the motor.
Pump Shut Off Head: 541 ft Field Serviceable: Pump can be rebuilt in the field to like new
Motor Speed: 3450 1/min condition with common tools and readily available spare parts.
NOTE: The Model GS has left hand casing threads.
Max. Temperature: Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over
Liquid: Water, pure 40 years as a superior sand handling, durable pump design.
Motor Code: M07412 Stainless Steel Metal Parts: AISI types 302, 303 and 304 are
corrosion resistant, non-toxic and non-leaching.
System Input Pow er: 1~ 230 V FDA Compliant Non-Metallic Parts: Impellers, diffusers and
Motor Rated Horsepow er: 0,56 kW bearing spiders are constructed of glass filled engineered composites.
They are corrosion resistant and non-toxic.
Max. Frequency:60 Discharge Head: High profile precision cast 303 stainless steel
Electrical Enclosures:-- for superior strength and durability. Cast in loop for safety line.
Motor Standard: -- Motor Adapter: Precision cast 303 stainless steel is extremely rigid
for accurate alignment of liquid end to motor. Generous space for
Suction Flange Standard: removal of motor mounting nuts with regular open-end wrench.
Suction Flange Rating: Bowls: Stainless steel for strength and abrasive resistance.
Suction Size: Check Valve: Built in check valve constructed of stainless
steel and low compression, FDA compliant, BUNA rubber for excellent
Discharge Flange Standard: abrasive resistance and quiet, efficient operation.
Discharge Flange Rating: Stainless Steel Casing: Polished stainless steel is strong, attractive and corrosion resistant.
Discharge: Hex Shaft Design: Six sided shafts for positive impeller drive.
Shaft Coupling: Exposed for ease of field alignment to motor
Approximate Net Weight: 15 kg shaft and to check pump rotation.
Impeller Size: 0 mm Urethane Upper and Middle Bearings: Fluted design for free
Impeller Construction: Cerrado passage of abrasives and excellent resistance to sand damage.
NEMA Motor:
Impeller Type: Rodete radial • Corrosion resistant stainless steel construction.
Impeller Material: • Built-in surge arrestor is provided on single phase motors through 5 HP.
• Stainless steel splined shaft. • Hermetically sealed windings.
Glass Filled Engineered Composite • Replaceable motor lead assembly.
Sense of Rotation: contra el sentido del reloj • UL 778 recognized. • NEMA mounting dimensions.
Shaft Seal: • Control box is required with 3 wire single phase units.
• Three phase units require a magnetic starter with three leg
protection. Magnetic starter and heaters must be ordered separately.
Printed f rom data f ile
7/26/2019
5-25GS Series
Submersible Pumps
Performance Data MODEL : 5GS07412C
Hydraulic Data Motor Data 4 Inch Submersible Standard Capacity
Maximum Flow Flow at Duty Point Maximum TDH TDH at Duty Point Voltage / Phase / Enclosure Model
9 US g.p.m. 5 US g.p.m. 165 m 105 m 230 V 3 Phase 5GS07412C
Submittal Prepared for: Job:
Engineer: Contractor:
Submittal Prepared by: Company:
Submittal Date: 7/26/2019 Approved by: Date:
Fluid: Water, pure Duty Chart: 3450 RPM
[m] Altura de impulsión 1
175
170
165 5GS07
160
155
150
145
140
135
130
125
120
115
110 112 m
105
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
5,15 US g.p.m.
0
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0[US g.p.m.]
Printed f rom data f ile
7/26/2019
5-25GS Series
Submersible Pumps
Unit Dimensions MODEL : 5GS07412C
Hydraulic Data Motor Data 4 Inch Submersible Standard Capacity
Maximum Flow Flow at Duty Point Maximum TDH TDH at Duty Point Voltage / Phase / Enclosure Model
9 US g.p.m. 5 US g.p.m. 165 m 105 m 230 V 3 Phase 5GS07412C
Submittal Prepared for: Job:
Engineer: Contractor:
Submittal Prepared by: Company:
Submittal Date: 7/26/2019 Approved by: Date:
Dimension Value
Discharge 1.25" NPT
L.O.A. 706,12
Motor Length 274,32
W E Length 431,8
Printed f rom data f ile
7/26/2019
