Multilayer Ceramic Chip Capacitor

Standard EIA Sizes

HOW TO ORDER
L 0603 5 A 271 J A T 2 A
1 2 3 4 56 789
W 1 Size: 0402, 0603, 0805, 1206, 1210, 1812, 1825
2 Voltage: 10V=Z, 16V=Y, 25V=3, 50V=5, 100V=1, 200V=2
T 3 Dielectric: NP0=A, X7R=C, Z5U=E, Y5V=G
4 Capacitance Code
5 Tolerance:
F=±1%(≥50pF), G=±2%(≥25pF), J=±5%
K=±10%, M=±20%, Z=+80, -20%
6 Failure Rate: A = Standard
7 Termination:
T = Plated Ni and Solder
8 Packaging:
2 = 7" Reel/unmarked
4 = 13" Reel/unmarked
9 Special Code:
A = Standard Product

Dimensions: millimeters (inches) Standard Packaging

L W T BULK TAPE & REEL
7" 13"
0402 1.0±0.1 (0.039±0.004) 0.5±0.1 (0.020±0.004) 0.6 max. (0.024 max.) 0402 50,000 10,000 N/A
0603 1.6±0.15 (0.063±0.006) 0.8±0.15 (0.031±0.006) 0.9 max. (0.035 max.) 0603 15,000 4,000 10,000
0805 2.0±0.2 (0.079±0.008) 1.25±0.2 (0.049±0.008) 1.3 max. (0.051 max.) 0805 10,000 (T=0.6mm) 4,000 10,000
5,000 (T=1.25mm)
1206 3.2±0.2 (0.126±0.008) 1.6±0.2 (0.063±0.008) 1.5 max. (0.059 max.)
1206 N/A 4,000 10,000
1210 3.2±0.2 (0.126±0.008) 2.5±0.2 (0.098±0.008) 1.7 max. (0.067 max.) 1210 N/A 4,000 10,000
1812 4.5±0.3 (0.177±0.012) 3.2±0.2 (0.126±0.008) 1.7 max. (0.067 max.)
1825 4.5±0.3 (0.177±0.012) 6.4±0.4 (0.252±0.016) 1.7 max. (0.067 max.)

Capacitance Range
NP0 X7R Z5U Y5V
Type 25V 50V 100V 200V 10V 16V 25V 50V 100V 200V 25V 50V 10V 16V 25V 50V
0402 Min. 0.5pF 0.5pF — — — 100pF 100pF 100pF — — — — 2200pF 2200pF 2200pF 2200pF
Max. 220pF 120pF — — — .047µF 6800pF 3900pF — — — — 0.1µF .1µF .022µF 0.01µF
0603 Min. 0.5pF 0.5pF 0.5pF — 100pF 100pF 100pF 100pF 100pF — .01µF .01µF 2200pF 2200pF 2200pF 2200pF
Max. 1000pF 1000pF 330pF — .22µF 0.1µF .047µF .015µF 4700pF — .047µF .027µF 1.0µF .33µF .22µF .056µF
0805 Min. 0.5pF 0.5pF 0.5pF 0.5pF 100pF 100pF 100pF 100pF 100pF 220pF .01µF .01µF .01pF .01µF .01µF .01µF
Max. 4700pF 2200pF 1000pF 470pF 2.2µF .47µF .22µF .1µF .022µF 1500pF .12µF .1µF 4.7µF 2.2µF 1.0µF .33µF
1206 Min. 0.5pF 0.5pF 0.5pF 0.5pF 1000pF 1000pF 1000pF 1000pF 1000pF 330pF .01µF .01µF .01µF .01µF .01µF .01µF
Max. .01µF 4700pF 2200pF 1000pF 4.7µF 1.0µF 1.0µF .22µF 0.1µF 5600pF .33µF .33µF 10.0µF 4.7µF 2.2µF 1.0µF
1210 Min. 560pF 560pF 560pF 560pF — 1000pF 1000pF 1000pF 1000pF 470pF .01µF .01µF .1µF .1µF .1µF .1µF
Max. .01µF .01µF 3900pF 1500pF — 4.7µF 2.2µF .22µF .1µF 8200pF .56µF .47µF 22µF 10µF 4.7µF 1.0µF
1812 Min. 1000pF 1000pF 1000pF 1000pF — — — .01µF .01µF — .01µF .01pF — — .15µF .15µF
Max. .015µF .01µF 4700pF 3300pF — — — 1.0µF .47µF — 1.0µF 1.0µF — — 1.5µF 1.5µF
1825 Min. — 1000pF 1000pF 1000pF — — — .01pF .01pF — .01µF .01pF — — .47µF .47µF
Max. — .022µF .012µF 6800pF — — — 1.0µF .47µF — 1.0µF 1.0µF — — 1.5µF 1.0µF

For maximum capacitance - consult factory.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #001. Visit our website http://www.avxcorp.com

1
Low Profile Chips
Z5U & Y5V Dielectric
HOW TO ORDER
L 1206 3 E 224 Z A T 2 T
1 2 3 4 5 6 7 8 9
W

1 Size: (L" x W")

T 2 Voltage: 25V = 3
3 Dielectric: Z5U = E, Y5V = G
4 Capacitance Code
5 Capacitance Tolerance: Z = +80/-20%
6 Failure Rate: A = Not Applicable
7 Terminations: T = Plated Ni and Solder
8 Packaging: 2 = 7" Reel, 4 = 13" Reel
9 Thickness: T = .026" Max.
S = .022" Max.
R = .018" Max.

Z5U Y5V
25V 25V
L W
Type T Min. Max. Min. Max.
mm (inches) mm (inches)
0.46 (0.018) .01µF .033µF .01µF .082µF
0805 2.01 ± 0.2 1.25 ± 0.2 0.56 (0.022) .01µF .056µF .01µF .12µF
(0.079 ± 0.008) (0.049 ± 0.008)
0.66 (0.026) .01µF .082µF .01µF .18µF
0.46 (0.018) .01µF .082µF .01µF .22µF
1206 3.2 ± 0.2 1.6 ± 0.2 0.56 (0.022) .01µF .15µF .01µF .27µF
(0.126 ± 0.008) (0.063± 0.008)
0.66 (0.026) .01µF .22µF .01µF .33µF
0.46 (0.018) .01µF .15µF .01µF .33µF
1210 3.2 ± 0.2 2.5 ± 0.2 0.56 (0.022) .01µF .27µF .01µF .39µF
(0.126 ± 0.008) (0.098 ± 0.008)
0.66 (0.026) .01µF .33µF .01µF .47µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #002. Visit our website http://www.avxcorp.com

2
 Low Inductance Chip Capacitors
Specially Designed MLC Chips for Low Inductance
HOW TO ORDER
0508 5 C 822 M A T 1 W
1 2 3 4 5 6 7 8 9
X t 1 AVX Style: 0306, 0508, 0612
W 2 Voltage: 25V = 3, 16V = Y, 10V = Z
3 Temperature Coefficient: C = X7R, G = Y5V
4 Capacitance Code: (2 significant digits + no. of zeros)
T Examples: 10 pF = 100 100 pF = 101
1,000 pF = 102 22,000 pF = 223
L 220,000 pF = 224 1 µF = 105
5 Capacitance Tolerance: M = ±20% Z = +80, -20%,
P = GMV K = ±10%
6 Failure Rate: A = Does not apply, H = High, Rel*
7 Termination: T = NiGuard Nickel Barrier Solder Plate
8 Marking Packaging: 9 = Bulk Unmarked, 1 = Reel Unmarked
9 Special Code: Thickness: mm (in.)
U = .51 (.020) max., V = .76 (.030) max., W = 1.02 (.040) max.
*Consult factory for details.

Capacitance Range: Maximum Capacitance Values, (µF)

X7R and Y5V Dielectric millimeters (inches) Thickness X7R Y5V
(T) Size 10V 16V 25V 10V 16V 25V
AVX 0306 0508 0612
Style 0.050 0612 2.2 1.0 0.27 6.8 3.3 1.2
0612 1.5 0.68 0.22 4.7 1.8 .82
Length 0.81 ± 0.15 1.27 ± .25 1.6 ± .25 0.040
(L) (0.032 ± 0.006) (0.050 ± 0.010) (0.060 ± 0.010) 0508 0.68 0.27 0.1 2.2 1.0 .47
Width 1.60 ± 0.15 2.0 ± .25 3.2 ± .25 0612 1.0 0.47 0.12 3.3 1.5 .56
(W) (0.063 ± 0.006) (0.080 ± 0.010) (0.126 ± 0.010) 0.030
0508 0.47 0.18 0.056 1.5 .56 .22
Separation 0612 0.47 0.18 0.056 1.5 .68 .27
0.23 (0.009) 0.38 (0.015) 0.50 (0.020)
(X)
0.022 0508 0.22 0.082 0.022 0.68 .33 .12
terminal 0.38 max. / 0.13 min. 0.50 max. / 0.13 min. 0.46 max. / 0.13 min.
(t)* (0.015 max. / 0.005 min.) (0.020 max. / 0.005 min.) (0.018 max. / 0.005 min.) 0306 0.1

Impedance vs. Frequency

ESR and Impedance vs. Frequency 0805 vs. 0508 0.1µF - Y5V
0612 0.1µF - X7R 10

10
05
08 08
IMPEDANCE, Ohms

05
1.0
ESR and IMPEDANCE, Ohms

1.0 .1
E
NC
DA
PE
IM .01
1 10 100 1,000
.1 FREQUENCY, MHz

ESR
0612 vs. 1206
10

.01 1206
1.0 10 100 1,000
IMPEDANCE, Ohms

FREQUENCY, MHz 1.0

0612

.1

.01
1 10 100 1,000
FREQUENCY, MHz

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #003. Visit our website http://www.avxcorp.com

3
Tip & Ring
Multilayer Ceramic Chip Capacitors
General Specifications HOW TO ORDER
Capacitance Range 0.1µF to 1.2µF 1812 P C 104 K A T 1 A
(25°C, 1.0 ± 0.2Vrms at 1kHz) 1 2 3 4 5 6 7 8 9
Capacitance Tolerance ±10%, ±20% 1 AVX Style: 1812, 1825, 2220, 2225
Dissipation Factor 2.5% max. 2 Voltage: 250VDC Telco Rating
(25°C, 1.0 ± 0.2Vrms at 1kHz) 3 Temperature Coefficient: X7R
Temperature Characteristic X7R ±15% (0 VDC) 4 Capacitance Code:
2 significant digits + no. of zeros
Voltage Rating 250VDC Telco Rating Examples: 1,000 pF = 102
IR (25°C, at 250VDC) 1000 Megaohm-Microfared min. 22,000 pF = 223
220,000 pF = 224
Dielectric Strength 250% Rated VDC for 5 seconds 1 µF = 105
at 50mA max. current 5 Capacitance Tolerance: K = ±10%, M = ±20%
6 Failure Rate: A = Not Applicable
7 Termination: T = Nickel Barrier and Solder Plate
8 Packaging: 1 = 7" Reel 1,000 pcs.
3 = 13" Reel 4,000 pcs.
9 = Bulk 500 pcs.
9 Special Code: A = Unmarked

Dimensions: millimeters (inches)

SIZE 1812 1825 2220 2225
Length (L) 4.6 ±0.3 4.6 ±0.3 5.6 ±0.3 5.6 ±0.3 W
(0.180 ±0.012) (0.180 ±0.012) (0.220 ±0.012) (0.220 ±0.012) L
Width (W) 3.2 ±0.2 6.35 ±0.4 5.1 ±0.4 6.35 ±0.4
(0.125 ±0.008) (0.250 ±0.016) (0.200 ±0.016) (0.250 ±0.016)
Thickness (T) 2.0 max. 2.0 max. 2.0 max. 2.0 max. T
(0.080 max.) (0.080 max.) (0.080 max.) (0.080 max.)
terminal (t) .63 ±0.38 .63 ±0.38 .63 ±0.38 .63 ±0.38
(0.025 ±0.015) (0.025 ±0.015) (0.025 ±0.015) (0.025 ±0.015)
t
Capacitance 0.10 0.33 0.47 0.47
Range µF 0.47 1.0 1.0 1.2

Standard Part Number Offering “TIP & RING” Graph

(Others available upon request)
1812PC104KAT1A 1825PC334KAT1A 2220PC474KAT1A 2225PC474KAT1A
1812PC124KAT1A 1825PC394KAT1A 2220PC564KAT1A 2225PC564KAT1A
1812PC154KAT1A 1825PC474KAT1A 2220PC684KAT1A 2225PC684KAT1A
1812PC184KAT1A 1825PC564KAT1A 2220PC824KAT1A 2225PC824KAT1A
1812PC224KAT1A 1825PC684KAT1A 2220PC105KAT1A 2225PC105KAT1A
1812PC274KAT1A 1825PC824KAT1A 2225PC125KAT1A
1812PC334KAT1A 1825PC105KAT1A
1812PC394KAT1A
1812PC474KAT1A

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #004. Visit our website http://www.avxcorp.com

4
MIL-PRF-55681/MLC Chips
Military Part Number Identification
CDR01/02/03/04/05/06
Military Designation Per MIL-PRF-55681
L Part Number Example
W D t (example) CDR01 BP 101 B K S M
1 2 3 4 5 6 7
1 MIL Style: CDR01, CDR02, CDR03, CDR04, CDR05, CDR06
T
2 Voltage Temperature Limits:
BP = 0 ± 30 ppm/°C without voltage; 0 ± 30 ppm/°C
with rated voltage from -55°C to +125°C
BX = ± 15% without voltage; +15 –25% with rated
voltage from -55°C to +125°C
Standard Packaging 3 Capacitance Code
BULK 4 Rated Voltage: A = 50V, B = 100V
CDR01 5,000
5 Capacitance Tolerance: J ±5%, K ±10%, M ±20%
CDR02 5,000
CDR03 3,000
6 Termination Finish:
CDR04 3,000 M = Palladium Silver U = Base Metallization/Barrier
CDR05 1,000 N = Silver Nickel Gold Metal/Solder Coated*
CDR06 1,000
S = Solder Coated W = Base Metallization/Barrier
Metal/Tinned (Tin or Tin/
Lead Alloy)
7 Failure Rate Level: M = 1.0% R = .01%
P = .1% S = .001%

Tape & Reel Quantities

All tape and reel specifications are in compliance
with RS481.
8mm 12mm
Embossed or Punched Carrier CDR01
Embossed Only CDR02, CDR03, CDR04, CDR05, CDR06
Qty. per Reel/7" Reel 2,000 or 4,000 max. 1,000 max.
Qty. per Reel/13" Reel 10,000 max. 4,000 max.

Dimensions: millimeters (inches) Capacitance Range, pF

Per Thickness D Termination MIL Type TC Min. Max. Tolerance WVDC
AVX Length Width
MIL-PRF- Style (L) (W) (T) Band (t) CDR01 BP 10 180 ±5%, ±10% 100
55681 Max. Min. Max. Min. Max. Min. BX 120 3,300 ±10%, ±20% 100
CDR01 0805 2.03±.381 1.27±.381 1.40 .508 — .762 — .254 BX 3,900 4,700 ±10%, ±20% 50
(0.080±0.015) (0.050±0.015) (0.055) (0.020) — (0.030) — (0.010) CDR02 BP 220 270 ±5%, ±10% 100
CDR02 1805 4.57±.381 1.27±.381 1.40 .508 — — .762 .254 BX 3,900 10,000 ±10%, ±20% 100
(0.180±0.015) (0.050±0.015) (0.055) (0.020) — — (0.030) (0.010) BX 12,000 22,000 ±10%, ±20% 50
CDR03 1808 4.57±.381 2.03±.457 2.03 .508 — — .762 .254 CDR03 BP 330 1,000 ±5%, ±10% 100
(0.180±0.015) (0.080±0.018) (0.080) (0.020) — — (0.030) (0.010) BX 12,000 33,000 ±10%, ±20% 100
CDR04 1812 7.57±.381 3.18±.381 2.03 .508 — — .762 .254 BX 39,000 68,000 ±10%, ±20% 50
(0.180±0.015) (0.125±.015) (0.080) (0.020) — — (0.030) (0.010) CDR04 BP 1,200 3,300 ±5%, ±10% 100
CDR05 1825 4.57 +.508 6.35 +.508 BX 39,000 56,000 ±10%, ±20% 100
-.381 -.381 2.03 .508 — — .762 .254 BX 82,000 180,000 ±10%, ±20% 50
(0.180 +0.020) (0.250 +0.020) (0.080) (0.020) — — (0.030) (0.010)
-0.015) -0.015) CDR05 BP 3,900 5,600 ±5%, ±10% 100
BX 68,000 150,000 ±10%, ±20% 100
CDR06 2225 5.72±.508 6.35 +.508 2.03 .508 — — .762 .254 BX 220,000 330,000 ±10%, ±20% 50
(0.225±0.020) (0.250 +0.020) (0.080) (0.020) — — (0.030) (0.010)
CDR06 BP 6,800 10,000 ±5%, ±10% 100
*For CDR11, 12, 13, and 14 see AVX Microwave Chip Capacitor Catalog BX 390,000 470,000 ±10%, ±20% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #005. Visit our website http://www.avxcorp.com

5
MIL-PRF-55681/Chips
Military Part Number Identification
CDR31/32/33/34/35
Military Designation Per MIL-PRF-55681
L
W
Part Number Example
D t
(example) CDR31 BP 101 B K S M
1 2 3 4 5 6 7
T 1 MIL Style: CDR31, CDR32, CDR33, CDR34, CDR35
2 Voltage Temperature Limits:
BP = 0 ± 30 ppm/°C without voltage; 0 ± 30 ppm/°C
Standard Packaging with rated voltage from -55°C to +125°C
BULK BX = ± 15% without voltage; +15 –25% with rated
CDR31 5,000
voltage from -55°C to +125°C
CDR32 5,000 3 Capacitance Code
CDR33 5,000 4 Rated Voltage: A = 50V, B = 100V
CDR34 3,000 5 Capacitance Tolerance: C ±.25 pF, D ±.5 pF, F ±1%,
CDR35 1,000 J ±5%, K ±10%, M ±20%
6 Termination Finish:
Tape & Reel Quantities M = Palladium Silver U = Base Metallization/Barrier
All tape and reel specifications are in compliance N = Silver Nickel Gold Metal/Solder Coated*
with RS481. S = Solder Coated W = Base Metallization/Barrier
8mm 12mm Metal/Tinned (Tin or Tin/
Embossed or CDR31, CDR32 Lead Alloy)
Punched Carrier CDR33 *Solder shall have a melting point of 200°C or less.
Embossed Only CDR34, CDR35
Qty. per Reel/7" Reel 2,000 or 4,000 max. 1,000 max.
7 Failure Rate Level: M = 1.0% R = .01%
P = 0.1% S = .001%
Qty. per Reel/13" Reel 10,000 max. 4,000 max.

Dimensions: millimeters (inches)

Per MIL-PRF-55681 AVX Thickness (T) D Termination Band (t)
Style Length (L) Width (W) Max. Min. Max. Min.
CDR31 0805 2.00 (0.079) 1.25 (0.049) 1.3 (0.051) .50 (0.020) .70 (0.028) .30 (0.012)
CDR32 1206 3.20 (0.126) 1.60 (0.063) 1.3 (0.051) — .70 (0.028) .30 (0.012)
CDR33 1210 3.20 (0.126) 2.50 (0.098) 1.5 (0.059) — .70 (0.028) .30 (0.012)
CDR34 1812 4.50 (0.177) 3.20 (0.126) 1.5 (0.059) — .70 (0.028) .30 (0.012)
CDR35 1825 4.50 (0.177) 6.40 (0.252) 1.5 (0.059) — .70 (0.028) .30 (0.012)

Capacitance Range, pF
MIL Type TC Min. Max. Tolerance WVDC
CDR31 BP 1.0 9.1 ±.25pF, ±.5pF 100
10 470 ±1%, ±5%, ±10%
BP 510 680 ±1%, ±2%, ±10% 50
BX 470 4,700 ±10%, ±20% 100
BX 5,600 18,000 ±10%, ±20% 50
CDR32 BP 1.0 9.1 ±.25pF, ±.5pF 100
10 1,000 ±1%, ±5%, ±10%
BP 1,100 2,200 ±1%, ±5%, ±10% 50
BX 4,700 15,000 ±10%, ±20% 100
BX 18,000 39,000 ±10%, ±20% 50
CDR33 BP 1,000 2,200 ±1%, ±5%, ±10% 100
BP 2,400 3,300 ±1%, ±5%, ±10% 50
BX 15,000 27,000 ±10%, ±20% 100
BX 39,000 100,000 ±10%, ±20% 50
CDR34 BP 2,200 4,700 ±1%, ±5%, ±10% 100
BP 5,100 10,000 ±1%, ±5%, ±10% 50
BX 27,000 56,000 ±10%, ±20% 100
BX 100,000 180,000 ±10%, ±20% 50
CDR35 BP 4,700 10,000 ±1%, ±5%, ±10% 100
BP 11,000 22,000 ±1%, ±5%, ±10% 50
BX 56,000 150,000 ±10%, ±20% 100
BX 180,000 470,000 ±10%, ±20% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #006. Visit our website http://www.avxcorp.com

6
Microwave Thin-Film Chip Capacitors
Accu-F® Series
HOW TO ORDER
B 0603 5 J 120 G A W TR
1 23 4 5 6 7 8
W
1 Size code
T 2 Voltage: 3 = 25V, 5 = 50V, 1 = 100V
L 3 Temperature Coefficient:
J = 0±30ppm/°C
K = 0±60ppm/°C
4 Capacitance Code
Dimensions: millimeters (inches) 5 Tolerance:
0603 0805 For C≤5.6pF: A = ±0.05pF, B = ±0.1pF, C = ±0.25pF
For 5.6pF<C<10pF: B = ±0.1pF, C = ±0.25pF,
L 1.6±0.1 (0.063±0.004) 2.01±0.1 (0.079±0.004)
D = ±0.5pF
W 0.81±0.1 (0.032±0.004) 1.27±0.1 (0.050±0.004)
For C≥10pF: F = ±1%, G = ±2%, J = ±5%
T 0.63±0.1 (0.025±0.004) 0.63±0.1 (0.025±0.004)
6 A = Accu-F®
B 0.30±0.1 (0.012±0.004) 0.30±0.1 (0.012±0.004)
7 Termination:
*For other chip sizes please consult factory.
W = Ni/Solder Coated (Sn63, Pb37)
8 Packaging: TR = 7" Tape and Reel
TR/3 = 13" Tape and Reel

T
Recommended Pad Layout mm (inches) Standard Packaging
L W S T TAPE & REEL
7" 13"
W 0603 1.0 (0.039) 0.8 (0.031) 0.8 (0.031) 2.8 (0.110) 0603 3,000 10,000
0805 1.0 (0.039) 1.3 (0.051) 1.0 (0.039) 3.0 (0.118) 0805 3,000 10,000
Units: mm (inches)
L S L

Capacitance Range, pF
Temp. Characteristic Temp. Characteristic
J K
Size
25V 50V 100V 25V 50V 100V
min. 0.1 0.1 0.1 0.1 0.1 0.1
0603 max. 22 15 4.7 22 15 4.7
min. 0.1 0.1 0.1 0.1 0.1 0.1
0805 max. 47 33 10 100 33 15

ESR
ACCU-F® 0805
Ohm
1

1pF

0.1 3.3pF

33pF

0.01
0 0.5 1 1.5 2 2.5 3GHz
Measured on Boonton 34-A
(34-A limits measurements to 3 GHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #007. Visit our website http://www.avxcorp.com

7
Microwave Thin-Film Chip Capacitors
Accu-P® Series
HOW TO ORDER
B1
1210 5 J 560 G B T TR
1 23 4 5 6 7 8
W 1 Size code
T 2 Voltage: Z = 10V Y = 16V 3 = 25V
B2 5 = 50V 1 = 100V
L
3 Temperature Coefficient:
J = 0±30ppm/°C
Dimensions: millimeters (inches) K = 0±60ppm/°C
0402 0603 0805 1210 4 Capacitance Code
L
1.00±0.1 1.60±0.1 2.01±0.1 3.02±0.1 5 Tolerance:
(0.039±0.004) (0.063±0.004) (0.079±0.004) (0.119±0.004) For C≤2.0pF: A = ±0.05pF, B = ±0.1pF,
0.55±0.07 0.81±0.1 1.27±0.1 2.5±0.1 C = ±0.25pF, P = ±0.02pF,
W (0.022±0.003) (0.032±0.004) (0.050±0.004) (0.100±0.004)
Q = ±0.03pF
0.40±0.1 0.63±0.1 0.93±0.2 0.93±0.2
T (0.016±0.004) (0.025±0.004) (0.037±0.008) (0.037±0.008) For 2.0pF<C≤3pF: A = ±0.05pF, B = ±0.1pF,
0.00+0.10/-0 0.35±0.15 0.30±0.1 0.43±0.1 C = ±0.25pF, Q = ±0.03pF
B1 (0.00+0.004/-0) (0.014±0.006) (0.012±0.004) (0.017±0.004) For 3.0pF<C≤5.6pF: A = ±0.05pF, B = ±0.1pF
B2
0.20±0.1
— — —
C = ±0.25pF
(0.008±0.004) For 5.6pF<C<10pF: B = ±0.1pF, C = ±0.25pF,
D = ±0.5pF
Standard Packaging For C≥10pF: F = ±1%, G = ±2%, J = ±5%
TAPE & REEL
7" 13" 6 B = Accu-P®
0402 5,000 20,000 7 Termination: T = Ni/High temperature solder
0603 3,000 10,000 (Sn 96, Ag 4) for 0603, 0805, 1210
0805 3,000 10,000
1210 3,000 10,000 W = Nickel/Solder Coated (Sn, Pb) for 0402 size
8 Packaging: TR = 7" Tape and Reel
TR/3 = 13" Tape and Reel
Capacitance Range, pF
Temp. Characteristic Temp. Characteristic
J K
Size
10V 16V 25V 50V 100V 25V 50V 100V
min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
0402 0.1 7.5 0.1 10 0.1 12
0603 0.1 24 0.1 12
0805 0.1 33 0.1 27 0.1 8.2 0.1 47 0.1 33 0.1 12
1210 0.1 27 0.1 33 0.1 47 0.1 33

ESR ESR
ACCU-P® 0805 ACCU-P® 1210
Ohm
1 Ohm
1

1pF
1pF
0.1 3.3pF
0.1 3.3pF
10pF
33pF
33pF
0.01
0 0.5 1 1.5 2 2.5 3GHz 0.01
0 0.5 1 1.5 2 2.5 3GHz
Measured on Boonton 34-A
(34-A limits measurements to 3 GHz) Measured on Boonton 34-A
(34-A limits measurements to 3 GHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #008. Visit our website http://www.avxcorp.com

8
Microwave Multilayer Capacitors
High “Q” - AQ Series
HOW TO ORDER
AQ 11 E M 100 J A 1 B A
W
L
1 2 3 4 5 67 8 9 0
1 AVX Style
A 1J
T
10 2 Case Style: 11, 12, 13, 14
3 Voltage: 50V=5, 150V=E, 300V=9, 100V=1, 200V=2, 500V=7
4 Temperature Coefficient: M=+90±20ppm/°C, A=0±30ppm/°C
5 (2 Significant digits + no. of zeros)
Examples: 10pF=100, 100pF=101, 1000pF=102
6 Capacitance B=±.1pF C=±.25pF D=±.5pF F=±1%
Tolerance: G=±2% J=±5% K=±10% M=±20%
Standard Packaging 7 Failure Rate: A=Not applicable
TAPE & REEL WAFFLE
7" 13"
8 Terminations:
1=Pd/Ag, 7=Ag/Ni/Au, J=Nickel barrier: Sn/Pb (60/40)
AQ11 2,000 10,000 100
AQ12 2,000 10,000 100 9 Packaging: B=Bulk, M=7" reel, R=13" reel, W=Waffle pack
AQ13 2,000 10,000 48 0 Special Code: A=Standard
AQ14 2,000 10,000 48

Mechanical Dimensions: millimeters (inches)

Case Length (L) Width (W) Thickness (T) Band Width Avail. Termination
1.60±.152 .813±.152 .889 .357±.152
AQ06 (0.063±0.006) (0.032±0.006) (0.035) max. (0.014±0.006) J
1.40±.381 1.40±.381 .508/1.45 .254+.254-.127
AQ11 (0.055±0.015) (0.055±0.015) (0.020±0.057) (0.010+0.010-0.005) 1, 7
1.40±.381 1.40±.381 .508/1.45 .254+.254-.127
AQ12 (0.055±0.015) (0.055±0.015) (0.020±0.057) (0.010+0.010-0.005) J
2.79±.508 2.79±.508 .762/2.59 .381±.254
AQ13 (0.110±0.020) (0.110±0.020) (0.030±0.102) (0.015±0.010) 1, 7
2.79±.508 2.79±.508 .762/2.59 .381+.254
AQ14 (0.110±0.020) (0.110±0.020) (0.030±0.102) (0.015±0.010) J

Capacitance Range, pF
A (0±30ppm/°C) M (+90±20ppm/°C) C (±15%)
50V 150V 200V 300V 500V 50V 150V 200V 300V 500V 50V
min. — — — — — 68 0.1 — — — —
AQ06 max. — — — — — 120 62 — — — —
min. 110 0.1 — — — — 0.1 — — — —
AQ11 max. 1000 100 — — — — 100 — — — —
min. 110 0.1 — — — — 0.1 — — — 1000
AQ12 max. 1000 100 — — — — 100 — — — 10000
min. 1100 510 220 110 0.1 — 510 220 110 0,1 —
AQ13 max. 5100 1000 470 200 100 — 1000 470 200 100 —
min. 1100 510 220 110 0.1 — 510 220 110 0,1 5000
AQ14 max. 5100 1000 470 200 100 — 1000 470 200 100 10000

Typical Performance Curves

Q vs Frequency ESR vs Frequency Q vs Frequency ESR vs Frequency
BP AQ11/12 BP AQ11/12 BG AQ11/12 BG AQ11/12
1 10000 1
10000

1000 1000
ESR (Q) 0.01 ESR (Q) 0.01
Q Q

100 100

0.01 10 0.01
10 100 Freq. (MHz) 1000 100 100 Freq. (MHz) 1000
100 Freq. (MHz) 1000 Freq. (MHz) 1000
-1pF -15pF -100pF -3.3pF -10pF -330pF
-1pF -15pF -100pF -1pF -10pF -47pF -330pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #009. Visit our website http://www.avxcorp.com

9
MIL-PRF-55681/4 RF/Microwave Chips
CDR11/12, 13/14

HOW TO ORDER
L
W CDR12 BG 101 A K U M
W
L
T A 0J
1 2 3 4 5 6 7
47
0J
T 10
1 MIL Style: CDR11, CDR12, CDR13, CDR14
2 Voltage Temperature Limits:
BG = +90 ± 20 ppm/°C with and without rated
voltage from -55°C to +125°C
CDR11/12 CDR13/14 BP = 0 ± 30 ppm/°C with and without rated voltage
from -55°C to +125°C
3 Capacitance Code
4 Rated Voltage: A = 50V B = 100V C = 200V
Standard Packaging D = 300V E = 500V
TAPE & REEL WAFFLE 5 Capacitance Tolerance:
7" 13" B = ±.1pF C = ±.25pF D = ±.5pF F = ±1%,
CDR11 2,000 10,000 100 G = ±2% J = ±5% K = ±10% M = ±20%
CDR12 2,000 10,000 100 6 Termination Finish (Military Designations):
CDR13 2,000 10,000 48
M = Palladium/Silver CDR11/13 only
CDR14 2,000 10,000 48 N = Silver, Nickel, Gold CDR11/13 only
S = Solder Coated, Final CDR12/14 only
U = Base Metallization, Barrier Metal, Solder
Coated (Solder M.P. 200°C or Less)
CDR12/14 only
W = Base Metallization, Barrier Metal, Tinned
(Tin or Tin/Lead Alloy) CDR12/14 only
7 Failure Rate Level:
M, P, R & S

Dimensions: millimeters (inches)

Per AVX Thickness (T) Termination Band (TB) Available
Length (L) Width (W)
MIL-PRF-55681 Style Max Min Max Min Termination
1.40±.381 1.40±.381 1.45 .508 .508 .127
CDR11 AQ11 M, N
(0.055±0.015) (0.055±0.015) (0.057) (0.020) (0.020) (0.005)
1.40±.635 1.40±.381 1.45 .508 .508 .127
CDR12 AQ12 S, U, W
(0.055±0.025) (0.055±0.015) (0.057) (0.020) (0.020) (0.005)
2.79±.508 2.79±.508 2.59 1.47 .635 .127
CDR13 AQ13 M, N
(0.110±0.020) (0.110±0.020) (0.102) (0.058) (0.025) (0.005)
2.79 +.889 -.508 2.79±.508 2.59 1.47 .635 .127
CDR14 AQ14 S, U, W
(0.110+0.035,-0.020) (0.110±0.020) (0.102) (0.058) (0.025) (0.005)

Capacitance Range
50V 50V 200/500V 200/300V 200V 100V
Voltage-Temp. BG, BP BP BG, BP BG, BP BG, BP BG, BP
CDR11 0.1pF ~ 100pF 110pF ~ 1,000pF
CDR12 0.1pF ~ 100pF 110pF ~ 1,000pF
CDR13 — 680pF ~ 5100pF 0.1pF ~ 100pF 110pF ~ 200pF 220pF ~ 470pF 510pF ~ 620pF
CDR14 — 680pF ~ 5100pF 0.1pF ~ 100pF 110pF ~ 200pF 220pF ~ 470pF 510pF ~ 620pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #010. Visit our website http://www.avxcorp.com

10
Microwave NP0 Chip Capacitors
HOW TO ORDER
0603
0805 1 U 100 J A T M A
A
1 23 4 56 7 8 9
B C

D E D 1 Case Size
2 Voltage: A = 50V B = 100V C = 200V
0805 3 Dielectric = Ultra Low ESR
A 4 Capacitance Code
B
5 Capacitance Tolerance:
C B=±.1pF C=±.25pF D=±.5pF F=±1%
G=±2% J=5% K=10% M=±20%
D E D
6 A = Not applicable
1210 7 Termination
A
8 Packaging: M = 7" reel embossed tape/marked
R = 13" reel embossed tape/marked
9 = Bulk
B 9 Standard: 2 = 7" reel paper tape/unmarked
C
4 = 13" reel paper tape/unmarked

D E D Standard Packaging
BULK TAPE & REEL
7" 13"
0603 5,000 4,000 10,000
0805 5,000 4,000 10,000
1210 5,000 4,000 10,000
Dimensions: millimeters (inches)
Size A B C D E
0603 1.52±.25 (0.060±0.010) .76±.25 (0.030±0.010) .91 (0.036) max. .25±.13 (0.010±0.005) .76 (0.030) min.
0805 2.01±.2 (0.079±0.008) 1.25±.2 (0.049±0.008) 1.02±.127 (0.040±0.005) .51±.255 (0.020±0.010) .51 (0.020) min.
1210 3.2±.2 (0.126±0.008) 2.49±.2 (0.098±0.008) 1.27±.127 (0.050±0.005) .635±.381 (0.025±0.015) 1.02 (0.040) min.

Capacitance Range - NP0 (C0G)

Available Size Available Size Available Size

Cap (pF) Tolerance 0603 0805 1210 Cap (pF) Tolerance 0603 0805 1210 Cap (pF) Tolerance 0603 0805 1210
1.0 BCD 50V 100V 200V 7.5 BCJKM 50V 100V 200V 100 FGJKM N/A 100V 200V
u m m m
1.1
1.2
m m m m 8.2
9.1 BCJKM
110
120
m m m m
1.3 10 FGJKM 130
1.4 11 m 140
1.5 12 150 n
1.6 13 160 100V
1.7 15 180 N/A
1.8 16
18
200 m
1.9 220
2.0 20 270
2.1 22 300
2.2 24 330
2.4 27
30
360 n
2.7 390 200V
33
3.0 430 100V
36
3.3
39
470 m
3.6
3.9
43 n 510
560
47 50V
4.3 620
51 N/A
4.7 680
5.1
56 m 750
5.6 n 68
75 820
6.2 BCD n n n 82 n n n n 910 n n n n
6.8 BCJKM 50V 100V 200V 91 FGJKM N/A 100V 200V 1000 FGJKM N/A N/A 100V

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #011. Visit our website http://www.avxcorp.com

11
Microwave Multi-Cap SLC’s
Multi-Cap Series
HOW TO ORDER
GH B 5 5 A 6R8 K N 6
1 2 3 4 5 6 7 8 9
1 Type
2 Array Code: B = 2, C = 3, D = 4, E = 5, F = 6
3 Size Code: 2 = .020" W 3 = .030" W 5 = .050" W
Y = .025" W 4 = .040" W S = Special
4 Working Voltage Code: 5 = 50WVDC, 1 = 100WVDC
5 Dielectric Code
6 Capacitance: EIA Capacitance Code in pF
First two digits = significant figures or “R” for decimal place
Third digit = number of zeros or after “R” significant figures
7 Capacitance Tolerance:
<10pF >10pF
A = ±0.05pF (special order) J = ±5%
B = ±0.1pF K = ±10%
C = ±0.25pF M = ±20%
D = ±0.5pF
8 Termination: N = 99.99% pure sputtered gold over Ni.
(<1000 Å thickness)
9 Packaging: 6 = Waffle Pack
6N = Antistatic Waffle Pack
GHB Series: Dual Cap Single Layer Capacitors millimeters (inches)
GHB2 GHBY GHB3 GHBZ GHB5
L=1.27±.254 L=2.03±.381 L=2.03±.381 L=2.03±.381 L=2.03±.381
(0.050±0.010) (.080±.015) (.080±.015) (.080±.015) (.080±.015)
W=.508±.127 W=.635±.127 W=.762±.254 W=.889±.254 W=1.27±.254
(0.020±0.005) (0.025±0.005) (0.030±0.010) (0.035±0.010) (0.050±0.010)
T=.178±.076 T=.178±.076 T=.178±.076 T=.178±.076 T=.178±.076
(0.007±0.003) (0.007±0.003) (0.007±0.003) (0.007±0.003) (0.007±0.003)
Gap=.254±.076 Gap=.254±.076 Gap=.254±.076 Gap=.254±.076 Gap=.254±.076
(0.010±0.003) (0.010±0.003) (0.010±0.003) (0.010±0.003) (0.010±0.003)
Minimum Max. Cap Max. Cap Max. Cap Max. Cap Max. Cap
Dielectric “K” Capacitance Per Each Per Each Per Each Per Each Per Each
Code Factor Tolerance Cap. Pad Cap. Pad Cap. Pad Cap. Pad Cap. Pad
pF pF pF pF pF
A (NP0) 75 ±0.25 pF 1.5 3.0 3.5 4.0 6.0
1200 ±10% 47 68 82 91 130
C 2000 ±10% 68 110 130 150 220
4000 ±10% 75 150 200 225 325
B 5000 ±10% 130 270 330 390 510
Maxi 20,000 ±10% 320 650 750 900 1250
**For Capacitance below 10pF, C & D tolerance apply.

GH Series: Multi-Cap Array Single Layer Capacitors

Maximum Capacitance Per Each Capacitor Pad, pF millimeters (inches)
GH–2 GH–Y GH–3 GH–4
for 3 Cap Arrays 1.65±.381 (0.065±0.015) 1.65±.381 (0.065±0.015) 1.65±.381 (0.065±0.015) 1.65±.381 (0.065±0.015)
or 4 Cap Arrays 2.16±.381 (0.085±0.015) 2.16±.381 (0.085±0.015) 2.16±.381 (0.085±0.015) 2.16±.381 (0.085±0.015)
Length: for 6 Cap Arrays 3.18±.508 (0.125±0.020) 3.18±.508 (0.125±0.020) 3.18±.508 (0.125±0.020) 3.18±.508 (0.125±0.020)
Width .508±.127 (0.020±0.005) .635±.254 (0.025±0.010) .762±.254 (0.030±0.010) 1.02±.254 (0.040±0.010)
Pad Size .508±.381 (0.020x0.015) .635±.381 (0.025x0.015) .762±.381 (0.030x0.015) 1.02±.381 (0.040x0.015)
Minimum Max. Cap Max. Cap Max. Cap Max. Cap
Dielectric “K” Capacitance Per Each Per Each Per Each Per Each
Code Factor Tolerance Cap. Pad Cap. Pad Cap. Pad Cap. Pad
pF pF pF pF
A (NP0) 75 ±0.25 pF 0.9 1.1 1.25 1.75
C 4000 ±10% 50 60 75 100
B 5000 ±10% 60 75 90 120
Maxi 20,000 ±10% 200 250 300 400
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #012. Visit our website http://www.avxcorp.com

12
Gigahertz Single Layer Microwave Capacitors
Single Layer Ceramic - GH Series
HOW TO ORDER
L
W GH35 5 A 6R8 C A W
1 23 4 567
T
Termination 1 Case Size
(Fine grained high density 2 Voltage: 5 = 50V, 1 = 100V
ceramic dielectric)
3 Dielectric Code: (See Table below)
4 Capacitance Code
5 Tolerance:
Standard Packaging <10pF >10pF
WAFFLE B = ±0.1pF (Special order) J = ±5%
GH10 484 C = ±0.25pF K = ±10%
GH15 484 D = ±0.5pF M = ±20%
GH20 400/625
GH25 400/625 6 Termination:
GH35 400/625 A = 99.99% pure sputtered gold over Ti/W. (<1000 Å thickness)
GH50 256 N = 99.99% pure sputtered gold over nickel. (<1000 Å thickness)
GH70 256 7 Packaging:
GH90 100 6 = Waffle pack
6N = Antistatic waffle pack

Single Layer Capacitor Selection Chart millimeters (inches)

GH10 GH15 GH20 GH25 GH35 GH50 GH70 GH90
L=.254±.076 L=.381±.127 L=.508±.127 L=.635±.127 L=.889±.127 L=1.27±.254 L=1.78±.254 L=2.29±.254
(0.010±0.003) (0.015±0.005) (0.020±0.005) (0.025±0.005) (0.035±0.005) (0.050±0.010) (0.070±0.010) (0.090±0.010)
W=.254±.076 W=.381 +.000;
-.076 W=.508 +.000;
-.076 W=.635 +.000;
-.076 W=.889±.127 W=1.27±.254 W=1.78±.254 W=2.29±.254
(0.010±0.003) (0.015 +0.000;
-0.003 ) (0.020 +0.000;
-0.003 ) (0.025 +0.000;
-0.003 ) (0.035±0.005) (0.050±0.010) (0.070±0.010) (0.090±0.010)
T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.178±.051 T=.178±.051
(0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.007±0.002) (0.007±0.002)
Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap
Dielec- “K” Min. Value Value Value Value Value Value Value Value Value Value Value Value Value Value Value Value
tric Factor Cap. pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF
Code Tol. min max min max min max min max min max min max min max min max

A 14 ±0.1pF* 0.10 0.15 0.10 0.27 0.13 0.47 0.22 0.75 0.47 1.60 0.82 3.60 1.50 3.90 2.40 6.20

37 ±0.1pF* 0.10 0.18 0.16 0.33 0.33 0.68 0.56 1.20 1.20 2.40 2.00 4.30 3.60 7.50 6.20 13.00
Temperature Compensation

75 ±0.1pF* 0.15 0.82 0.33 1.50 0.68 2.40 1.20 3.90 2.40 8.20 4.30 18.00 7.50 20.00 13.00 33.00

4 205 ±0.25pF 0.36 2.20 0.91 3.90 1.80 6.80 3.30 10.00 6.20 22.00 11.00 51.00 20.00 56.00 36.00 82.00

7 370 ±0.25pF 0.68 3.90 1.60 7.50 3.30 12.00 5.60 18.00 12.00 39.00 20.00 91.00 36.00 100.00 62.00 150.00

Y 650 ±0.25pF 1.20 6.80 2.70 13.00 5.60 22.00 10.00 33.00 20.00 68.00 36.00 160.00 62.00 160.00 110.00 270.00

1200 ±5%** 2.20 13.00 5.60 24.00 11.00 39.00 20.00 62.00 39.00 130.00 68.00 300.00 120.00 330.00 220.00 510.00

C 2200 ±5%** 3.90 24.00 10.00 47.00 20.00 75.00 36.00 110.00 68.00 240.00 120.00 560.00 220.00 560.00 390.00 910.00
X7R

4400 ±5%** 7.50 47.00 18.00 82.00 39.00 150.00 68.00 220.00 150.00 470.00 240.00 1100.00 430.00 1200.00 750.00 1800.00
Y5V Z5U

E 9000 ±20% 16.00 100.00 39.00 180.00 82.00 300.00 150.00 430.00 270.00 910.00 510.00 2200.00 910.00 2400.00 1500.00 3600.00

G 14000 ±20% 24.00 150.00 62.00 270.00 130.00 470.00 220.00 680.00 430.00 1500.00 750.00 3300.00 1300.00 3600.00 2400.00 5600.00
**= Consult Factory

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #013. Visit our website http://www.avxcorp.com

13
Gigahertz Single Layer Microwave Capacitors
Single Layer Ceramic with Borders - GB Series
HOW TO ORDER
GB GB35 5 A 6R8 C A W
W
L 1 2 3 4 5 6 7
1 Case Size
T
2 Voltage: 5 = 50V, 1 = 100V
Termination
3 Dielectric Code: (See Table below)
(Fine grained high density
ceramic dielectric)
4 Capacitance Code
B
5 Capacitance Tolerance:
<10pF >10pF
B = ±0.1pF (Special order) J = ±5%
C = ±0.25pF K = ±10%
Standard Packaging D = ±0.5pF M = ±20%
WAFFLE
6 Termination:
A = 99.99% pure sputtered gold over
GB10 484
Ti/W (<1000 Å thickness)
GB15 484 N = 99.99% pure sputtered gold over nickel
GB20 400/625 (<1000 Å thickness)
GB25 400/625
GB35 400/625
7 Packaging: 6 = Waffle pack
6N = Antistatic waffle pack
GB50 256
GB70 256
GB90 100

GB Series: Single Layer Capacitor with Borders millimeters (inches)

GB10 GB15 GB20 GB25 GB35 GB50 GB70 GB90
B=.051±.025 B=.051±.025 B=.051±.025 B=.051±.025 B=.051±.025 B=.051±.025 B=.051±.025 B=.051±.025
(0.002±0.001) (0.002±0.001) (0.002±0.001) (0.002±0.001) (0.002±0.001) (0.002±0.001) (0.002±0.001) (0.002±0.001)
L=.254±.076 L=.381±.127 L=.508±.127 L=.635±.127 L=.889±.127 L=1.27±.254 L=1.78±.254 L=2.29±.254
(0.010±0.003) (0.015±0.005) (0.020±0.005) (0.025±0.005) (0.035±0.005) (0.050±0.010) (0.070±0.010) (0.090±0.010)
W=.254±.076 W=.381 +.000;
-.076 W=.508+.000;
-.076 W=.635 +.000;
-.076 W=.889±.127 W=1.27±.254 W=1.78±.254 W=2.29±.254
(0.010±0.003) (0.015+0.000;
-0.003
) (0.020 +0.000;
-0.003
) (0.025 +0.000;
-0.003
) (0.035±0.005) (0.050±0.010) (0.070±0.010) (0.090±0.010)
T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.127±.051 T=.178±.051 T=.178±.051
(0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.005±0.002) (0.007±0.002) (0.007±0.002)
Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap Cap
Dielec- “K” Min. Value Value Value Value Value Value Value Value Value Value Value Value Value Value Value Value
tric Factor Cap. pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF
Code Tol. min max min max min max min max min max min max min max min max
Compensation
Temperature

A 75 ±0.25pF 0.10 0.50 0.20 1.10 0.50 2.00 1.00 3.10 2.00 7.00 3.75 15.00 7.00 18.50 12.00 31.00
X7R

C 4400 ±10%** 5.50 35.00 11.50 52.00 33.00 130.00 52.00 175.00 125.00 400.00 215.00 1000.00 400.00 1100.00 700.00 1700.00
X7U

B 5000 10% 6.20 39.00 13.00 56.00 36.00 145.00 56.00 200.00 140.00 450.00 240.00 1100.00 450.00 1200.00 775.00 1900.00

**For Capacitance below 10pF, C & D tolerance apply.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #014. Visit our website http://www.avxcorp.com

14
Microwave Single Layer Capacitors
Maxi SLC’s-High Capacitance Single Layer Capacitors
HOW TO ORDER
W
L GH 01 5 8 101 K A 6
T
1 2 34 5 6 78
Termination

(Fine grained high density

ceramic dielectric)
1 Gigahertz
2 Case Size
3 Working Voltage: 5 = 50 WVDC
Standard Packaging 4 Dielectric Code: 8 = Maxi-SLC
WAFFLE 5 Capacitance Code: EIA capacitance code in pF
GH01 484 First two digits = significant figures
GH02 400/625
Third digit = number of zeros
GH03 400/625 6 Capacitance Tolerance: K = ±10%, M = ±20%
GH04 256 7 Termination:
GH05 256 A = 99.99% pure sputtered gold over
GH06 100 Ti/W (<2000 Å thickness)
N = 99.99% pure sputtered gold over
Ni (<2000 Å thickness)
8 Packaging: 6 = Waffle pack
6N = Antistatic waffle pack
Nominal Size/Capacitance (pF)/Tolerance Specifications millimeters (inches)

AVX Style GH01 GH02 GH03 GH04 GH05 GH06

(L) Length .381 .635 .889 1.27 1.78 2.29
(0.015) (0.025) (0.035) (0.050) (0.070) (0.090)
(W) Width .381 .635 .889 1.27 1.78 2.29
(0.015) (0.025) (0.035) (0.050) (0.070) (0.090)
(LW) Tolerance .127 .127 .127 .254 .254 .254
(±0.005) (±0.005) (±0.005) (±0.010) (±0.010) (±0.010)
(T) Thickness .178 .178 .178 .178 .178 .178
(0.007) (0.007) (0.007) (0.007) (0.007) (0.007)
(T) Tolerance .051 .051 .051 .051 .051 .051
(±0.002) (±0.002) (±0.002) (±0.002) (±0.002) (±0.002)

Cap. Cap. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol.
pF Code Avail. Avail. Avail. Avail. Avail. Avail.
68 680 K/M
75 750 K/M
82 820 K/M
100 101 K/M
120 121 K/M
150 151 K/M
220 221 K/M
270 271 K/M
330 331 K/M
390 391 K/M
470 471 K/M
560 561 K/M
680 681 K/M
750 751 K/M
820 821 K/M
1000 102 K/M
1200 122 K/M
1500 152 K/M
1800 182 K/M
2200 222 K/M
2700 272 K/M
3300 332 K/M
3900 392 K/M
4700 472 K/M
5600 562 K/M
6300 632 K/M

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #015. Visit our website http://www.avxcorp.com

15
Microwave Single Layer Capacitors
Maxi with Borders SLC’s-High Capacitance
HOW TO ORDER
GB
W GB 01 5 8 101 K A 6
L
1 2 34 5 6 78
T
Termination 1 Gigahertz with Borders
(Fine grained high density
2 Case Size
B ceramic dielectric) 3 Working Voltage: 5 = 50 WVDC
4 Dielectric Code: 8 = Maxi-SLC
5 Capacitance Code: EIA capacitance code in pF
First two digits = significant figures
Standard Packaging Third digit = number of zeros
WAFFLE
6 Capacitance Tolerance: K = ±10%, M = ±20%
GB01 484 7 Termination:
GB02 400/625 A = 99.99% pure sputtered gold over
GB03 400/625 Ti/W (<2000 Å thickness)
GB04 256 N = 99.99% pure sputtered gold over
GB05 256
Ni (<2000 Å thickness)
GB06 100 8 Packaging: 6 = Waffle pack
6N = Antistatic waffle pack
Nominal Size/Capacitance (pF)/Tolerance Specifications millimeters (inches)
AVX Style GB01 GB02 GB03 GB04 GB05 GB06
(L) Length .381 ± .127 .635 ± .127 .889 ± .127 1.27 ±.254 1.78 ± .254 2.29 ±.254
(0.015 ± 0.005) (0.025 ± 0.005) (0.035 ± 0.005) (0.050 ± 0.010) (0.070 ± 0.010) (0.090 ± 0.010)
(W) Width .381 ± .127 .635 ± .127 .889 ± .127 1.27 ± .254 1.78 ±.254 2.29 ±.254
(0.015 ± 0.005) (0.025 ± 0.005) (0.035 ± 0.005) (0.050 ± 0.010) (0.070 ± 0.010) (0.090 ± 0.010)
(T) Thickness .178 ± .051 .178 ± .051 .178 ± .051 .178 ± .051 .178 ± .051 .178 ± .051
(0.007 ± 0.002) (0.007 ± 0.002) (0.007 ± 0.002) (0.007 ± 0.002) (0.007 ± 0.002) (0.007 ± 0.002)
(B) Border .051 ± .025 .051 ± .025 .051 ± .025 .051 ± .025 .051 ± .025 .051 ± .025
(0.002 ± 0.001) (0.002 ± 0.001) (0.002 ± 0.001) (0.002 ± 0.001) (0.002 ± 0.001) (0.002 ± 0.001)

Cap. Cap. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol. Cap. Tol.
pF Code Avail. Avail. Avail. Avail. Avail. Avail.
43 430 K/M
51 510 K/M
56 560 K/M
68 680 K/M
75 750 K/M
82 820 K/M
100 101 K/M
220 221 K/M
270 271 K/M
330 331 K/M
390 391 K/M
470 471 K/M
560 561 K/M
680 681 K/M
750 751 K/M
820 821 K/M
1000 102 K/M
1200 122 K/M
1500 152 K/M
1800 182 K/M
2200 222 K/M
2700 272 K/M
3300 332 K/M
3900 392 K/M
4700 472 K/M
5600 562 K/M

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #016. Visit our website http://www.avxcorp.com

16
SMPS Capacitors
Surface Mount and Through-Hole Series (SM0, SM5)
HOW TO ORDER
SM0 1 7 C 106 M A N 650
D
E
CHIP SEPARATION
0.254 (0.010) TYP. 1 23 4 5 6 78 9
1.397 (0.055)
1 AVX Style:
B A
±0.254 (0.010)
Size: SM0 = Uncoated
6.35
SM5 = Epoxy coated (add .005" to max. and
(0.250) MIN.
0.254 (0.010) TYP.
NOM dimensions A, B, D & E)
0.508 (0.020) TYP.
2.54 (0.100) TYP. C 2 Size: (See dimensions chart)
2.54 (0.100) MAX.
0.635 (0.025) MIN. 3 Voltage: 50V = 5, 100V = 1, 200V = 2, 500V = 7
"N" STYLE LEADS
4 Temperature Coefficient:
C0G = A, X7R = C, Z5U = E
5 Capacitance Code
0.254 (0.010)
RAD. (TYP.) 6 Capacitance Tolerance:
C0G: J = ±5% X7R: K = ±10% Z5U: Z = +80, -20%
1.27 (0.050) K = ±10% M = ±20% P = GMV
MIN. (TYP.)
1.778 (0.070)
±0.254 (0.010) M = ±20% Z = +80, (+100, -0%)
"J" STYLE LEADS -20%
7 Failure Rate: A = Does not apply
8 Termination:
N = Straight Lead J = Leads formed in
0.254 (0.010)
RAD. (TYP.) L = Leads formed out
T = Ni Plate Solder plate (Chips only SM04 and SM05
1.27 (0.050) sizes C0G and X7R only)
MIN. (TYP.)
9 Height: (.650 is standard maximum thickness for
1.778 (0.070)
±0.254 (0.010)

"L" STYLE LEADS 5 chip stack see dimensions chart reference

dimension A)

Dimensions: millimeters (inches) Standard Packaging

No. of leads Trays
Style A (max.) B (max.) C ±.025 D ±.025 E (max.) per side
SM-1 6
SM-1 16.5 (0.650) 18.0 (0.710) 11.4 (0.450) 52.1 (2.051) 12.7 (0.500) 20 SM-2 12
SM-2 16.5 (0.650) 18.0 (0.710) 20.3 (0.800) 38.4 (1.512) 22.1 (0.870) 15
SM-3 20
SM-3 16.5 (0.650) 18.0 (0.710) 11.4 (0.450) 26.7 (1.051) 12.7 (0.500) 10
SM-4 25/40
SM-4 16.5 (0.650) 18.0 (0.710) 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4
SM-5 25/70
SM-5 16.5 (0.650) 18.0 (0.710) 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3
SM-6 16.5 (0.650) 18.0 (0.710) 31.8 (1.250) 52.1 (2.051) 34.3 (1.350) 20 SM-6 6
Note: Dimensions A & B are max. dimensions for 5 chip stacks (.120 max. each chip).
For SM-5 add .005" to max. and NOM dimensions A, B, D, & E

Maximum Capacitance Available Versus Style

AVX Style SM-1 SM-2 SM-3 SM-4 SM-5 SM-6
Max. Cap. (µF)* 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V

C0G (NP0)*** 5.00 3.50 1.90 0.90 6.00 5.00 2.80 1.30 2.30 1.90 1.00 0.45 0.80 0.65 0.35 0.12 0.25 0.20 0.10 0.05 16.0 12.0 6.50 2.50

X7R 130.0 60.0 27.0 13.0 200.0 90.0 42.0 20.0 90.0 30.0 14.0 6.50 36.0 9.00 5.50 2.00 12.00 3.40 1.60 0.80 400 200 120 45.0

Z5U 420.0 160.0 60.0 –– 590.0 230.0 170.0 –– 200.0 75.0 30.0 –– 60.0 23.0 15.0 –– 23.0 9.00 3.60 –– 1300 720 460 ––

No. of Leads/side** 20 15 10 4 3 20

Standard Max. Stack* 5 5 5 5 5 5

* Values given are for 5 chips stacked. For maximum per chip divide by 5. Maximum thickness per individual chip equals 3.05mm (0.120").
** Based on 2.54mm (0.100") centers.
*** TC FORMULATIONS AVAILABLE UPON REQUEST.
Note: Contact factory for other voltage ratings.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #017. Visit our website http://www.avxcorp.com

17
SMPS Capacitors
Plastic Case (SM9)
HOW TO ORDER
D ±0.254 (0.010)
+.000 (.000)
E -.254 (0.010)
SM9 1 7 C 106 M A N 660
1 23 4 5 6 78 9
Height 0.381 (0.015)
1 AVX Style: Size SM9 = Plastic Case
(see table) ±0.127 (0.005)
2 Size: (See dimensions chart)
6.35 (0.250) MIN.
3 Voltage: 50V = 5, 100V = 1, 200V = 2, 500V = 7
2.54 (0.100)
0.254 (0.010)
4 Temperature Coefficient:
CENTERS 0.508 (0.020)
±0.05 (0.002)
±0.05 (0.002)
C ±0.635 (0.025)
C0G = A, X7R = C, Z5U = E
5 Capacitance Code: (2 significant digits + no. of zeros)
(TYP.)

Dimensions: millimeters (inches) 10 pF = 100 22,000 pF = 223 1 µF = 105

No. of 100 pF = 101 220,000 pF = 224 10 µF = 106
Case
Code C D E leads 1,000 pF = 102 100 µF = 107
per side*
SM91 11.4 (0.450) 54.7 (2.155) 0.58 (0.023) 20
6 Capacitance Tolerance:
C0G: J = ±5% X7R: K = ±10% Z5U: Z = +80, -20%
SM92 20.3(0.800) 41.0 (1.615) 24.1 (0.950) 15
K = ±10% M = ±20% P = GMV
SM93 11.4 (0.450) 29.3 (1.155) 14.7 (0.580) 10
M = ±20% Z = +80, (+100, -0%)
SM94 10.2 (0.400) 12.3 (0.485) 12.3 (0.485) 4 -20%
SM95 6.35 (0.250) 9.02 (0.355) 9.02 (0.355) 3
SM96 31.8 (1.250) 54.6 (2.150) 36.3 (1.430) 20
7 Failure Rate: A = Does not apply
*Leads styles N, J or L available 8 Termination: N = Straight Lead J = Leads formed in
L = Leads formed out
9 Height: See table below for max cap. per height
Max Cap (µF) Available Versus Style with Height of 6.86mm (0.270")
SM91 _ _ _ _ _ _ AN270 SM92 _ _ _ _ _ _ AN270 SM 93 _ _ _ _ _ _ AN270 SM94 _ _ _ _ _ _ AN270 SM95 _ _ _ _ _ _ AN270 SM96 _ _ _ _ _ _ AN270
AVX
STYLE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V
C0G 1.0 .70 .38 .18 1.2 1.0 .56 .26 .46 .38 .20 .09 .16 .13 .07 .02 .05 .04 .02 .01 3.2 2.4 1.3 .50
X7R 27 12 5.4 2.6 40 18 8.4 4.0 18 6.0 2.8 1.3 7.2 1.8 1.1 .40 2.4 .68 .32 .16 80 40 24 9.0
Z5U 84 32 12 – – 110 46 34 –– 40 15 6.0 – – 12 4.6 3.0 – – 4.6 1.8 .72 – – 260 140 92 ––

Max Cap (µF) Available Versus Style with Height of 9.91mm (0.390")
SM91 _ _ _ _ _ _ AN390 SM92 _ _ _ _ _ _ AN390 SM93 _ _ _ _ _ _ AN390 SM94 _ _ _ _ _ _ AN390 SM95 _ _ _ _ _ _ AN390 SM96 _ _ _ _ _ _ AN390
AVX
STYLE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V
C0G 2.0 1.4 .76 .36 2.4 2.0 1.1 .52 .92 .76 .40 .18 .32 .26 .14 .04 .10 .08 .04 .02 6.4 4.8 2.6 1.0
X7R 54 24 10 5.2 80 36 16 8.0 36 12 5.6 2.6 14 3.6 2.2 .80 4.8 1.3 .64 .32 160 80 48 18
Z5U 160 64 24 – – 230 92 68 –– 80 30 12 –– 24 9.2 6.0 – – 9.2 3.6 1.4 – – 520 280 180 – –

Max Cap (µF) Available Versus Style with Height of 13.5mm (0.530")
SM91 _ _ _ _ _ _ AN530 SM92 _ _ _ _ _ _ AN530 SM93 _ _ _ _ _ _ AN530 SM94 _ _ _ _ _ _ AN530 SM95 _ _ _ _ _ _ AN530 SM96 _ _ _ _ _ _ AN530
AVX
STYLE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V

C0G 3.0 2.1 1.1 .54 3.6 3.0 1.6 .78 1.3 1.1 .60 .27 .48 .39 .21 .07 .15 .12 .06 .03 9.6 7.2 3.9 1.5
X7R 81 36 16 7.8 120 54 25 12 54 18 8.4 3.9 21 5.4 3.3 1.2 7.2 2.0 .96 .48 240 120 72 27
Z5U 250 96 36 – – 350 130 100 – – 120 45 18 –– 36 13 9.0 – – 13 5.4 2.1 – – 780 430 270 – –

Max Cap (µF) Available Versus Style with Height of 16.8mm (0.660")
SM91 _ _ _ _ _ _ AN660 SM92 _ _ _ _ _ _ AN660 SM93 _ _ _ _ _ _ AN660 SM94 _ _ _ _ _ _ AN660 SM95 _ _ _ _ _ _ AN660 SM96 _ _ _ _ _ _ AN660
AVX
STYLE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V
C0G 4.0 2.8 1.5 .72 4.8 4.0 2.2 1.0 1.8 1.5 .80 .36 .64 .52 .28 .09 .20 .16 .08 .04 12 9.6 5.2 2.0
X7R 100 48 21 10 160 72 33 16 72 24 11 5.2 28 7.2 4.4 1.6 9.6 2.7 1.2 .64 320 160 96 36
Z5U 330 120 48 – – 470 180 130 – – 160 60 24 –– 48 18 12 –– 18 7.2 2.8 – – 1000 570 360 – –

Max Cap (µF) Available Versus Style with Height of 20.3mm (0.800")
SM91 _ _ _ _ _ _ AN800 SM92 _ _ _ _ _ _ AN800 SM93 _ _ _ _ _ _ AN800 SM94 _ _ _ _ _ _ AN800 SM95 _ _ _ _ _ _ AN800 SM96 _ _ _ _ _ _ A N800
AVX
STYLE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V

C0G 5.0 3.5 1.9 .90 6.0 5.0 2.8 1.3 2.3 1.9 1.0 .45 .80 .65 .35 .12 .25 .20 .10 .05 16 12 6.5 2.5
X7R 130 60 27 13 200 90 42 20 90 30 14 6.5 36 9.0 5.5 2.0 12 3.4 1.6 .80 400 200 120 45
Z5U 420 160 60 – – 590 230 170 – – 200 75 30 –– 60 23 15 –– 23 9.0 3.6 – – 1300 720 460 – –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #018. Visit our website http://www.avxcorp.com

18
High Voltage SMPS Capacitors
Surface Mount and Through-Hole Series
HOW TO ORDER
D E
CHIP SEPARATION
0.254 (0.010) TYP. HV 01 A C 104 M A N 650
B A 1.397 (0.055)
1 23 4 5 6 78 9
±0.254 (0.010)
1 AVX Style
2 Size: (See dimensions chart)
6.35
(0.250) MIN.
.015 x 45 o
CHAM TYP. C
0.254 (0.010) TYP.
3 Voltage: 1K = A, 2K = G, 3K = H, 4K = J, 5K = K
0.508 (0.020) TYP.
2.54 (0.100) MAX. 4 Temperature Coefficient:
0.635 (0.025) MIN.
2.54 (0.100) TYP.
C0G = A, X7R = C, N1500 = 4
"N" STYLE LEADS
5 Capacitance Code
6 Capacitance Tolerance:
C0G: J = ±5% X7R: K = ±10% N1500: J = ±5%
K = ±10% M = ±20% K = ±10%
0.254 (0.010)
RAD. (TYP.) M = ±20% Z = +80, M = ±20%
-20%
1.778 (0.070)
1.27 (0.050)
MIN. (TYP.)
7 Failure Rate: A = Does not apply
±0.254 (0.010)
8 Termination:
"J" STYLE LEADS
N = Straight Lead
J = Leads formed in
L = Leads formed out
0.254 (0.010)
9 Height: (.650 is standard maximum thickness for
RAD. (TYP.) 5 chip stack see dimensions chart reference
dimension A)
1.27 (0.050)
1.778 (0.070) MIN. (TYP.)
±0.254 (0.010)

"L" STYLE LEADS

Dimensions: millimeters (inches)

No. of leads
Style A (max.) B (max.) C ±.025 D ±.025 E (max.) per side
HV01 16.5 (0.650) 18.0 (0.710) 53.3 (2.100) 10.5 (0.415) 54.9 (2.160) 4
HV02 16.5 (0.650) 18.0 (0.710) 39.1 (1.540) 20.3 (0.800) 40.6 (1.600) 8
HV03 16.5 (0.650) 18.0 (0.710) 27.2 (1.070) 10.5 (0.415) 28.7 (1.130) 4
HV04 16.5 (0.650) 18.0 (0.710) 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4
HV05 16.5 (0.650) 18.0 (0.710) 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3
HV06 16.5 (0.650) 18.0 (0.710) 53.3 (2.100) 29.0 (1.140) 54.9 (2.160) 11
Note: Dimensions A & B are max. dimensions for 5 chip stacks (.120 max. each chip).

Maximum Capacitance Available Versus Style

AVX Style HV01 HV02 HV03 HV04 HV05 HV06
Max. Cap. (µF) 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 3KV 4KV 5KV 1KV 2KV 1KV 2KV 3KV 4KV 5KV

C0G (NP0)*** .430 .120 .056 .031 .026 .610 .170 .079 .044 .037 .210 .065 .029 .015 .012 .064 .020 .009 .0045 .0037 .024 .0068 1.20 .330 .140 .092 .078

N1500 .700 .210 .092 .050 .042 1.00 .290 .120 .072 .060 .340 .100 .045 .025 .020 .100 .033 .014 .0072 .0063 .039 .011 1.90 .530 .230 .150 .130

X7R 5.50 1.30 .750 .330 .260 7.90 1.80 1.00 .470 .390 2.60 .690 .360 .160 .120 .820 .210 – – – .300 – 15.0 3.50 2.20 1.00 .850

No. of Leads/side** 4 8 4 4 3 11

Standard Max. Stack* 5 5 5 5 5 5

* Values given are for 5 chips stacked. For maximum per chip divide by 5. Maximum thickness per individual chip equals 3.05mm (0.120").
** Based on 2.54mm (0.100") centers.
*** TC FORMULATIONS AVAILABLE UPON REQUEST.
Note: Contact factory for other voltage ratings.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #019. Visit our website http://www.avxcorp.com

19
SK Series/SMPS Capacitors
Product Offering – C0G, X7R and Z5U
HOW TO ORDER
L
H
L
SK 01 3 E 125 Z A A
H
T
1 2 3 4 5 6 78
1 Style
2 Size: See chart below
M
LD M

LL LD
LL 3 Voltage: 25V = 3, 50V = 5, 100V = 1,
200V = 2, 500V = 7
4 Temperature Coefficient:
LS LS Z5U = E, X7R = C, C0G = A
SK01 SK03 - SK10
5 Capacitance Code
Dimensions: millimeters (Inches)
6 Capacitance Tolerance:
Z5U: Z = +80, -20%, P = GMV
Style L (max.) H (max.) T (max.) LS (nom.) LD (nom.) X7R: K = ±10%, M = ±20%, Z = +80, -20%
SK01 5.08 (0.200) 4.57 (0.180) 3.56 (0.140) 5.08 (0.200) .508 (0.020) C0G: J = ±5%, K = ±10%, M = ±20%
SK03 7.62 (0.300) 7.62 (0.300) 4.06 (0.160) 5.08 (0.200) .508 (0.020) 7 Failure Rate: A = Does not apply
SK04 10.2 (0.400) 10.2 (0.400) 4.06 (0.160) 5.08 (0.200) .508 (0.020)
8 Leads: A = Does not apply
SK05 12.7 (0.500) 12.1 (0.475) 4.06 (0.160) 10.2 (0.400) .635 (0.025)
SK06 22.9 (0.870) 15.0 (0.590) 4.06 (0.160) 20.1 (0.790) .813 (0.032)
Standard Packaging
SK07 27.9 (1.100) 15.0 (0.590) 4.06 (0.160) 24.9 (0.980) .813 (0.032)
BULK REEL (13")
SK08 27.9 (1.100) 15.0 (0.590) 7.62 (0.300) 24.9 (0.980) .813 (0.032)
SK01 300 2000
SK09 17.0 (0.670) 13.7 (0.540) 5.08 (0.200) 13.0 (0.515) .635 (0.025)
SK03 200 1000
SK10 23.6 (0.930) 18.3 (0.720) 7.11 (0.280) 20.3 (0.800) .813 (0.032)
SK04 200 1000
SK05 200 750
L = Length T = Thickness LS = Lead Spacing (Nominal ±0.031) SK06 16 N/A
H = Height M = Meniscus (0.060 max.) LL = Lead Length (2" max./1" min.)
SK07 10 N/A
LD = Lead Diameter (Nominal ±0.002)
SK08 10 N/A
SK09 50 N/A
SK10 10 N/A

Maximum Capacitance Values (C0G), µFd Maximum Capacitance Values (X7R), µFd
25 50 100 200 500 25 50 100 200 500
Style WVDC WVDC WVDC WVDC WVDC Style WVDC WVDC WVDC WVDC WVDC
SK01 0.015 0.012 0.010 0.0056 0.0018 SK01 0.39 0.33 0.27 0.12 0.033
SK03/SK53 0.056 0.047 0.039 0.022 0.0068 SK03/SK53 2.2 1.8 1.5 0.56 0.18
SK04/SK54 0.12 0.10 0.082 0.047 0.015 SK04/SK54 4.7 3.3 2.7 1.0 0.33
SK05/SK55 0.18 0.15 0.12 0.068 0.022 SK05/SK55 6.8 5.6 3.9 1.8 0.56
SK06 0.56 0.47 0.39 0.22 0.068 SK06 15 10 5.6 3.9 1.2
SK07 0.68 0.56 0.47 0.27 0.082 SK07 18 14 8.2 4.7 1.8
SK08 1.20 1.10 0.82 0.47 0.15 SK08 33 22 15 8.2 3.3
SK09 0.27 0.22 0.18 0.10 0.039 SK09 8.2 5.6 3.3 2.2 1.0
SK10 0.68 0.56 0.47 0.27 0.082 SK10 18 12 6.8 4.7 1.5

Maximum Capacitance Values (Z5U), µFd

25 50 100 200
Style WVDC WVDC WVDC WVDC
SK01 1.2 0.82 0.47 0.33
SK03/SK53 5.6 3.30 2.20 1.50
SK04/SK54 10.0 8.20 4.70 3.30
SK05/SK55 18.0 10.00 6.80 4.70
SK06 47.0 39.00 22.00 15.00
SK07 68.0 47.00 27.00 18.00
SK08 120.0 100.00 47.00 33.00
SK09 27.0 18.00 10.00 6.80
SK10 56.0 39.00 22.00 18.00

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #020. Visit our website http://www.avxcorp.com

20
SMPS Capacitors (European Versions)
Surface Mount and Through-Hole
Radial 4 Terminal Dual SMT SMT HOW TO ORDER
In-Line ‘J’ Style ‘L’ Style CH 52 5 C 106 M A 8 O A 0
1 2 3 4 5 6 7 8 9 0 s 11
1 Avx Series: CH
2 Avx Size
3 Voltage: 5=50VDC, 1=100VDC,
2=200VDC, 7=500VDC
4 Dielectric: A=C0G
C=X7R
For dimensions consult AVX European Sales 5 Capacitance Code:
Capacitance in pF 1st two significant
digits + no. of zeros. R denotes decimal point
e.g., 102=1000pF
6 Capacitance Tolerance:
J=±5% M=±20%
K=±10%
7 Specification:
A=Failure rate does not apply
8 Finish: 3=Uncoated 4=Varnish
8=Varnish & end fill (Multi-Chip Array)
9 Lead Diameter: 0=Dual in-line
0 Lead Space: S=CV radial, A=Dual in-line,
s
11 Lead Style:
0=Straight dual 5=Low profile ‘L’
2=2 lead radial Single in-line
3=Low profile ‘J’ 7=‘L’ dual in-line
Single Chip 8=‘J’ dual in-line
4=4 terminal

Capacitance Ranges
C0G (µF) X7R (µF)
Series 50VDC 100VDC 200VDC 500VDC 50VDC 100VDC 200VDC 500VDC
CH 41-44 0.068 ~ 0.39 0.047 ~ 0.33 0.033 ~ 0.27 0.01 ~ 0.068 1.8 ~ 12 1.2 ~ 10 0.33 ~ 2.2 0.12 ~ 1.0
CH 51-54 0.12 ~ 0.68 0.1 ~ 0.47 0.068 ~ 0.39 0.022 ~ 0.1 3.9 ~ 22 2.2 ~ 15 0.68 ~ 3.9 0.27 ~ 1.5
CH 61-64 0.22 ~ 1.2 0.15 ~ 1.0 0.12 ~ 0.68 0.033 ~ 0.22 6.8 ~ 39 4.7 ~ 33 1.0 ~ 10 0.47 ~ 3.3
CH 71-74 0.39 ~ 2.2 0.27 ~ 1.8 0.22 ~ 1.2 0.068 ~ 0.39 12 ~ 68 8.2 ~ 47 2.2 ~ 12 0.82 ~ 5.6
CH 76-79 0.39 ~ 2.2 0.27 ~ 1.8 0.22 ~ 1.2 0.068 ~ 0.39 12 ~ 68 8.2 ~ 47 2.2 ~ 12 0.82 ~ 5.6
CH 81-84 0.39 ~ 2.7 0.27 ~ 2.2 0.22 ~ 1.8 0.068 ~ 0.56 15 ~ 82 12 ~ 68 2.2 ~ 15 0.82 ~ 5.6
CH 86-89 0.68 ~ 3.7 0.56 ~ 0.33 0.39 ~ 3.3 0.12 ~ 0.82 22 ~ 120 15 ~ 100 3.9 ~ 27 1.5 ~ 8.2
CH 91-94 1.2 ~ 5.6 1.0 ~ 4.7 0.82 ~ 3.9 0.22 ~ 1.2 39 ~ 180 33 ~ 150 8.2 ~ 39 2.7 ~ 18

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #021. Visit our website http://www.avxcorp.com

21
SMPS Capacitors (European Versions)
Surface Mount “J” Lead
SMT only
RH31, RH32, RH41, RH51, RH61 HOW TO ORDER
L max W max
RH31 5 C 225 M A 3 0 A 3
1 2 3 4 5 6 7 8 90
H max 1 AVX Series: RH31, RH32, RH41, RH51, RH61
h
2 Voltage: 5=50VDC, 1=100VDC, 2=200VDC,
1.4 7=500VDC
0.25 Bend
(0.055)
Typ 3 Dielectric: C=X7R
(0.010)
Typ
Radius
90° ± 5°
S
2.54 (0.100) ± 0.05 (0.002)
4 Capacitance Code:
Capacitance in pF 1st 2 significant digits + no. of
0.6 (0.024)
± 0.1 (0.004) zeros. R denotes decimal point e.g., 102=1000pF
M1 5 Capacitance Tolerance:
M1 = M2 ± 0.5 (0.020)
K=±10%, M=±20%
6 Specification: A=Failure rate does not apply
M2
7 Finish: 3=Waffle Pack
1.65 (0.065) A=Tape & Reel
± 0.15 (0.006)
SMT Only:
8 Lead Diameter: 0=Dual in-line
9 Lead Space: A=Dual in-line
0 Lead Style: See below
millimeters (inches)
Lead
Style L max. W max. H max. S ± 0.1 h
Style
RH31 7.62 7.00 5.08 5.08 1.78 ±0.25 3
(0.300) (0.276) (0.200) (0.200) (0.070±0.010)
RH32 7.62 7.00 8.13 5.08 1.78 ±0.25 3
(0.300) (0.276) (0.320) (0.200) (0.070±0.010)
RH41 9.20 8.70 4.90 5.08 1.10 max. 9
(0.362) (0.343) (0.193) (0.200) (0.043)
RH51 10.7 10.7 4.90 7.62 1.10 max. 9
(0.421) (0.421) (0.193) (0.300) (0.043)
RH61 14.9 13.6 4.90 10.16 1.60 max. 9
(0.587) (0.535) (0.193) (0.400) (0.063)

RH31, RH32, RH41, RH51, RH61 Capacitance Ranges

Voltage Capacitance (µF)
(VDC) RH31 RH32 RH41 RH51 RH61
50 2.2 4.4 2.7 3.3 6.8 - 10.0
100 1.0 ~ 1.5 2.0, 3.0 1.8 2.2 - 3.9 6.8 - 10.0
200 0.33 ~ 0.39 0.66 ~ 0.78 0.47 0.56
500 0.1 0.2 0.27 0.33 - .47

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #022. Visit our website http://www.avxcorp.com

22
Integrated Passive Components (IPC)
0405 2 Cap Array

HOW TO ORDER
L W 1 A 2 3 C 682 M A T 2 A
P 1 2 3 4 5 6 7 8 9 0s 11 s
12
S S
1 AVX Style
2 AVX Size: 1=0405
T 3 Array
4 Number of Caps
BW C/L
5 Voltage: Y=16V, 3=25V, 5=50V
C
L
OF CHIP 6 Dielectric: A=NP0/C0G, C=X7R,G=Y5V
7 Capacitance Code
8 Capacitance Tolerance:
J=±5%, K=±10%,
BL W M=±20%, Z=+80 -20%
9 Failure Rate: A=Not Applicable
0 Terminations:
T=Plated Ni and Solder
Dimensions: millimeters (inches)
W L T BW BL P S s
11 Packaging Code (Reel Size):
0.94±0.15 1.37±0.15 0.66 MAX 0.254±0.06 0.20±0.10 0.64 REF 0.32±0.10 1=7" Reel Embossed Tape
(0.037±0.006) (0.054±0.006) (0.026 MAX) (0.010±0.0025) (0.008±0.004) (0.025 REF) (0.0125±0.004)
2=7" Reel Paper Tape
Pad Layout Dimensions 3=13" Reel Embossed Tape
4=13" Reel Paper Tape
E
s
12 Quantity (Pcs./Reel):
D F=1,000
A=4,000 or 10,000
A

B
C

A B C D E
0.69 0.97 1.65 0.30 0.64
(0.027) (0.038) (0.065) (0.012) (0.025)

Available Cap Values

Voltage NP0/C0G X7R Y5V
16V 10pF ~ 100pF 220pF ~ .022µF .01µF ~.12µF
0405
25V 10pF ~ 100pF 220pF ~ .0068µF .01µF ~.068µF
2 element
50V 10pF ~ 100pF 220pF ~ .0068µF .01µF ~.068µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #023. Visit our website http://www.avxcorp.com

23
Integrated Passive Components (IPC)
0508 4 Cap Array

L HOW TO ORDER
X X W 2 A 4 Y C 103 M A T 3 A
P
S S
1 2 3 4 5 6 7 8 9 0s 11 s
12

1 AVX Style
T 2 AVX Size: 2=0508
3 Array
BW C/L OF CHIP
4 Number of Caps
C
L 5 Voltage: 3=25V, Y=16V, Z=10V, 5=50V
6 Dielectric: A=NP0, C=X7R, G=Y5V
7 Capacitance Code
BL
8 Capacitance Tolerance:
W
M=±20% K=±10%
9 Failure Rate: A=Not Applicable
0 Terminations:
T=Plated Ni and Solder
Dimensions: millimeters (inches) s Packaging Code (Reel Size):
11

L W T BW BL P X S 1=7" Reel Embossed Tape

2.03±0.2 1.27±0.2 0.965 0.254±0.1 0.18+0.25
-0.08 0.508 REF 0.76±0.1 0.254±0.1 2=7" Reel Paper Tape
(.080±.008) (.050±.008) (.038 MAX) (.010±.004) (.007+.010
-.003) (.020 REF) (.030±.004) (.010±.004)
3=13" Reel Embossed Tape
Pad Layout Dimensions 4=13" Reel Paper Tape
E s
12 Quantity (Pcs./Reel):

D F=1,000
A=2,000, 4,000 or 10,000
A

B
C

A B C D E
0.64 1.27 1.91 0.28 0.51
(.025) (.050) (.075) (.011) (.020)

Available Cap Values

Voltage NP0/C0G X7R Y5V
16V 10pF ~ 270pF 220pF ~ .056µF .01µF ~.27µF
0508 25V 10pF ~ 270pF 220pF ~ .018µF .01µF ~.18µF
4 element 50V 10pF ~ 270pF 220pF ~ .018µF .01µF ~.10µF
100V 10pF ~ 270pF 220pF ~ .0047µF –
16V 10pF ~ 470pF 220pF ~ .1µF .01µF ~.47µF
0508 25V 10pF ~ 470pF 220pF ~ .033µF .01µF ~.33µF
2 element 50V 10pF ~ 470pF 220pF ~ .033µF .01µF ~.18µF
100V 10pF ~ 390pF 220pF ~ .037µF –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #024. Visit our website http://www.avxcorp.com

24
Integrated Passive Components (IPC)
0612 4 Cap Array
HOW TO ORDER
L
X
W 3 A 4 3 C 103 K A T 3 A
X
P
S S 1 2 3 4 5 6 7 8 9 0s 11 s
12

1 AVX Style
T 2 AVX Size: 3=0612
3 Array
BW C/L OF CHIP
4 Number of Caps
C
L 5 Voltage: Y=16V, 3=25V, 5=50V, 1=100V
6 Dielectric: A=NP0, C=X7R, G=Y5V
7 Capacitance Code
BL
W 8 Capacitance Tolerance:
J=±5% M=±20%
K=±10% Z=+80-20%
9 Failure Rate: A=Not Applicable
Dimensions: millimeters (inches) 0 Terminations:
L W T BW BL P X S T=Plated Ni and Solder
3.20±0.2 1.60±0.2 1.35 MAX 0.41±0.1 0.18+0.25
-0.08
(.126±.008) (.063±.008) (.053 MAX) (.016±.004) (.007+.010
0.76 REF
-.003 ) (.030 REF)
1.14±0.1 0.38±0.1
(.045±.004) (0.015±.004) s
11 Packaging (Reel Size):
1=7" Reel Embossed Tape
Pad Layout Dimensions 2=7" Reel Paper Tape
3=13" Reel Embossed Tape
E
4=13" Reel Paper Tape
D
s
12 Quantity (Pcs./Reel):
A F=1,000
B A=2,000, 4,000 or 10,000
C

A B C D E
0.89 1.65 2.54 0.46 0.79
(.035) (.065) (.100) (.018) (.031)
millimeters (inches)

Available Cap Values – 0612 - 4 Elements

Voltage NP0/C0G X7R Y5V
16V 10pF ~ 470pF 220pF ~ .1µF .01µF ~.47µF
Standard 25V 10pF ~ 470pF 220pF ~ .033µF .01µF ~.33µF
Range 50V 10pF ~ 470pF 220pF ~ .033µF .01µF ~.18µF
100V 10pF ~ 390pF 220pF ~ .0082µF —
Extended 6.3V — .1µF ~ .1.0µF —
Range 10V — .1µF ~ .1.0µF —

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #025. Visit our website http://www.avxcorp.com

25
Integrated Passive Components (IPC)
Multi-Value Cap Array
L HOW TO ORDER
X X
W 3 A 4 Y C 102 M 104 M A T 3 A
P
S S 1 2 3 4 5 6 7 8 9 0 ss 11 12 s
13 s
14

1 AVX Style
T 2 AVX Size: 3=0612
3 A=Array
4 Number of Caps
BW C/L OF CHIP
C 5 Voltage: Y=16V, 3=25V, 5=50V, 1=100V
L
6 Dielectric: A=NP0, C=X7R
7 Capacitance Code: Cap 1
BL 8 Tolerance: M=±20%, Cap 1
W
9 Capacitance Code: Cap 2
0 Tolerance: M=±20%, Cap 2
s
11 Failure Rate: A=Not Applicable

s
12 Termination Code: T=Plated Ni and Solder
Dimensions: millimeters (inches)
L W T BW BL P X S
s
13 Packaging Code:
3.20±0.20 1.60±0.20 1.22 MAX 0.41±0.10 0.18+0.25-0.08 0.76 REF 1.14±0.10 0.38±0.10 Reel Size
(.126±.008) (.063±.008) (.048 MAX) (.016±.004) (.007+.010-.003) (.030 REF) (.045±.004) (.015±.004) 1=7" Reel Embossed Tape
3=13" Reel Embossed Tape
Pad Layout Dimensions s
14 Special Code

B
C

Performance Characteristics
Capacitance NP0 X7R
Tolerance ±10% ±20%
Dissipation 0.1% max. 5% max.
Factor
A B C D E Insulation 100,000 MΩ min. or 100,000 MΩ min. or
0.89 1.65 2.54 0.46 0.79
Resistance 1000 MΩ - µF, 1000 MΩ - µF,
(0.035) (0.065) (0.100) (0.018) (0.030) (+25°C, VDC) whichever is less whichever is less

Available Cap Values

pF µF
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.100
100
120
150
180
220
270
330
390
470
560
680
820

Capacitance
10
12
15
18
22
27
33
39
47
56
68
82

16V
25V
NP0 50V
100V

16V
25V
X7R 50V
100V

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #026. Visit our website http://www.avxcorp.com

26
Integrated Passive Components (IPC)
0805 Feedthru Capacitors
1206 Feedthru Capacitors
HOW TO ORDER
W 3 F 1 5 C 223 8 A T 3 A
1 2 3 4 5 6 7 8 9 0s 11 s
12

1 AVX Style
2 AVX Size: 2=0805, 3=1206
L 3 Feedthru
X
S 4 Number of Elements
5 Voltage: 5=50V, 1=100V
T 6 Dielectric: A=NP0, C=X7R
7 Capacitance Code
BW 8 Capacitance Tolerance: 8=+50/-20%
CL 9 Failure Rate: A=Not Applicable
0 Terminations: T=Plated
s
11 Packaging (Reel Size):
BL
W 1=7" Reel Embossed Tape
3=13" Reel Embossed Tape
s
12 Quantity (Pcs./Reel):
F=1,000
EW
COMMON GND A=2,000, 4,000 or 10,000

Dimensions: millimeters (inches)

Size L W T BW BL EW X S Part No. Size Voltage Dielectric Capacitance
0805 2.01±0.20 1.25±0.20 0.76±0.08 0.46±0.10 0.18+0.25-0.08 0.25±0.13 1.02±0.10 0.23±0.05 W2F11A 220 8ATxx 0805 100V NP0 22pF
(.079±.008) (.049±.008) (.030±.003) (.018±.004) (.007+.010-.003) (.010±.005) (.040±.004) (.009±.002) W2F11A 470 8ATxx 0805 100V NP0 47pF
1206 3.20±0.20 1.60±0.20 1.22±0.08 0.89±0.10 0.18+0.25-0.08 0.38±0.18 1.60±0.10 0.46±0.05 W2F11A 101 8ATxx 0805 100V NP0 100pF
(.126±.008) (.063±.008) (.048±.003) (.035±.004) (.007+.010-.003) (.015±.007) (.063±.004) (.018±.002) W2F11A 221 8ATxx 0805 100V NP0 220pF
W2F11A 471 8ATxx 0805 100V NP0 470pF
Pad Layout Dimensions W2F15C 102 8ATxx 0805 50V X7R 1000pF
W2F15C 222 8ATxx 0805 50V X7R 2200pF
W2F15C 472 8ATxx 0805 50V X7R 4700pF
T
W2F15C 103 8ATxx 0805 50V X7R 10000pF
P W2F15C 223 8ATxx 0805 50V X7R 22000pF
W2F15C 473 8ATxx 0805 50V X7R 47000pF
P W3F11A 220 8ATxx 1206 100V NP0 22pF
W3F11A 470 8ATxx 1206 100V NP0 47pF
W3F11A 101 8ATxx 1206 100V NP0 100pF
W
W3F11A 221 8ATxx 1206 100V NP0 220pF
S W3F11A 471 8ATxx 1206 100V NP0 470pF
W3F15C 102 8ATxx 1206 50V X7R 1000pF
W3F15C 222 8ATxx 1206 50V X7R 2200pF
W3F15C 472 8ATxx 1206 50V X7R 4700pF
W3F15C 103 8ATxx 1206 50V X7R 10000pF
W3F15C 223 8ATxx 1206 50V X7R 22000pF
C L W3F15C 473 8ATxx 1206 50V X7R 47000pF

Size T P S W L C
0805 3.45 0.51 0.76 1.27 1.02 0.46
Typical Performance Characteristics
(.136) (.020) (.030) (.050) (.040) (.018) NP0 X7R
1206 4.45 0.94 1.02 1.65 1.09 0.71 Capacitance Tolerance +50% -20% +50% -20%
(.175) (.037) (.040) (.065) (.043) (.028)
Voltage Ratings (VDC) 100V 50V
Rated Current 300ma 200ma
Insulation Resistance 1000mΩ 1000mΩ
DC Resistance ≤0.6Ω ≤0.6Ω
Operating
Temperature Range -55 to +125°C

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #027. Visit our website http://www.avxcorp.com

27
Integrated Passive Components (IPC)
1206 4 Element Feedthru Capacitor Array

L BL HOW TO ORDER
W 3 F 4 5 C 221 8 A T 3 A
1 2 3 4 5 6 7 8 9 0s 11 s
12

ES W 1 AVX Style
2 AVX Size: 3=1206
3 Feedthru
P
4 Number of Elements: 4
S
5 Voltage: 5=50V, 1=100V
6 Dielectric: A=NP0, C=X7R
X
7 Capacitance Code
8 Capacitance Tolerance: 8=+50/-20%
W
9 Failure Rate: A=Not Applicable
0 Terminations: T=Plated
BW s
11 Packaging (Reel Size):

Center Line = Feedthru Paths 1=7" Reel Embossed Tape

= Common Ground 3=13" Reel Embossed Tape
s
12 Quantity (Pcs./Reel):
Dimensions: millimeters (inches) F=1,000
L W T BW BL P X S ES A=2,000, 4,000 or 10,000
3.25±.0.15 1.60±0.2 1.22 MAX 0.41±0.1 0.18+0.25
-0.08 0.76 REF 1.14±0.1 0.38±0.1 0.41±0.1
(.128±.006) (.063±.008) (.048 MAX) (.016±.004) (.007+.010
-.003) (.030 REF) (.045±.004) (.015±.004) (.016±.004)

Part No. Size Voltage Dielectric Capacitance

W3F41A 220 8ATxx 1206 100V NP0 22pF
W3F41A 470 8ATxx 1206 100V NP0 47pF
W3F41A 101 8ATxx 1206 100V NP0 100pF
W3F45C 221 8ATxx 1206 50V X7R 220pF
W3F45C 471 8ATxx 1206 50V X7R 470pF

Typical Performance Characteristics

NP0 X7R
Capacitance Tolerance +50% -20% +50% -20%
Voltage Ratings (VDC) 100V 50V
Rated Current 300ma 200ma
Insulation Resistance 1000mΩ 1000mΩ
DC Resistance ≤0.6Ω ≤0.6Ω
Operating
Temperature Range -55 to +125°C

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #028. Visit our website http://www.avxcorp.com

28
Integrated Passive Components (IPC)
|Z| Chip – 0603 Series Resistor/Capacitor
|Z| Array – 0612 4 Element Array
HOW TO ORDER
Z 1 D 1 3 Y 680 M 510 K A T 2 A
1 2 3 4 5 6 7 8 9 0 ss 11 12 s
13 s
14
|Z| Chip 1 AVX Style
2 AVX Size: 1=0603, 3=0612
Stock Part Values 3 D=Discrete, A=Array
Part Number Capacitance Resistance 4 Number of Elements
Z1D13Y470M101KAT2A 47pF 100 ohms
5 Voltage: 3=25V
Z1D13Y680M510KAT2A 68pF 51 ohms
6 Dielectric: Y=500ppm/C
Z1D13Y101M470KAT2A 100pF 47 ohms
7 Capacitance Code
Z1D13Y151M330KAT2A 150pF 33 ohms
8 Capacitance Tolerance
9 Resistance Code
0 Resistance Tolerance
s
11 Failure Rate

s
12 Termination Code

s
13 Packaging Code
s
14 Special Code

|Z| Array Impedance Characteristics

1,000,000

100,000
Stock Part Values
Impedance (ohms)

100 Ohm 47pF

Part Number Capacitance Resistance 10,000
47 Ohm 100pF
33 Ohm 150pF
Z3A43Y470M101KAT2A 47pF 100 ohms
1,000
Z3A43Y680M510KAT2A 68pF 51 ohms
Z3A43Y101M470KAT2A 100pF 47 ohms 100
Z3A43Y470M470KAT2A 47pF 47 ohms
10
0.01 0.1 1 10 100 1,000 10,000 100,000
Frequency (MHz)

|Z| Chip Termination of an

Performance Characteristics 80 MHz Transmission Line
Capacitance Performance
Dielectric, TCC 0±500 ppm/°C
Capacitor Tolerance ±20%
WVDC 25V
DF (1kHz) 2.5% Max.

Resistor Performance
Tolerance ±10%
TCR ±250 ppm/°C M 10.0ns/d 1.665ns 1.00nsv

Ch 1 2.00V
2.00V 2.00ns/d 1.6650ns

Ringing in an 80 MHz clock pulse (light line)

is eliminated when terminated with a
100pF/47 ohm |Z| Chip (bold line)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #029. Visit our website http://www.avxcorp.com

29
Integrated Passive Components (IPC)
Inter-Digitated Capacitor
0508 / 0612 IDC HOW TO ORDER
L W 3 L 1 Y C 105 M A T 3 A
X X 1 2 3 4 5 6 7 8 9 0s 11 s
12

P
S S
1 AVX Style
2 AVX Size: 2=0508, 3=0612
T
3 Low Inductance
4 Number of Caps
5 Voltage: 6=6.3V, Z=10V, Y=16V
BW C/L OF CHIP 6 Dielectric: C=X7R
C
L 7 Capacitance Code
(–) (+) (–) (+)
8 Capacitance Tolerance: M=±20%
9 Failure Rate: A=Standard
BL
W
0 Terminations: T=Plated Ni and Solder
s
11 Packaging (Reel Size):
1=7" Reel Embossed Tape
3=13" Reel Embossed Tape
(+) (–) (+) (–)
s
12 Quantity (Pcs./Reel): F=1,000

Dimensions: millimeters (inches)

L W T BW BL P X S Comparison of ESL for Various Parts
2.03±0.2 1.27±0.2 0.965 0.254±0.1 0.18 +0.25
-0.08 0.508 REF 0.76±0.1 0.254±0.1
0508 Measured
(.080±.008) (.050±.008) (.038 MAX) (.010±.004) (.007)+.010 (.020 REF) (.030±.004) (.010±.004)
-.003 Package Style
3.20±0.2 1.60±0.2 1.14 MAX 0.41±0.1 0.18 +0.25
-0.08 0.76 REF 1.14±0.1 0.38±0.1 Inductance (pH)
0612 (.126±.008) (.063±.008) (.045 MAX) (.016±.004) (.007)+.010 (.030 REF) (.045±.004) (.015±.004)
-.003 0508 IDC 110
Pad Layout Dimensions 0612 IDC 175
E
Feedthru 375
0612 550
D
1206 1200

B
C

- + - +

A B C D E + - + -
0.64 1.27 1.91 0.28 0.51
0508 (.025) (.050) (.075) (.011) (.020) Mechanical Specs
0.89 1.65 2.54 0.46 0.79
0612 (.035) (.065) (.100) (.018) (.031) CTE (ppm/°C) X7R: 12.0
Thermal Conductivity 4-5 W / M°K
Available Cap Values Terminations Available Plated Nickel and Solder
Capacitance (µF) 0.047 0.1 0.22 0.47 0.68 1.0 2.2 Thickness 0.038" max* (0508)
6.3V 0.048" max* (0612)
0508 10V
*Thickness will depend on cap value and dielectric.
16V
6.3V
0612 10V
16V
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #030. Visit our website http://www.avxcorp.com

30
Integrated Passive Components (IPC)
Dual & Triple Resonance Capacitor

HOW TO ORDER
W 1 D 1 5 A 2 4 0 A
12 3 45 6 7 8 9 0
1 AVX Style: IPC
2 AVX Size: 1=0603, 2=0805
3 D=DRC, T=TRC
T 4 Number of Elements
5 Voltage: 5=50V
6 Dielectric: A=NP0
W L
7 First Resonance Code
8 Second Resonance Code
9 Third Resonance Code
0 Standard Packaging:
7" Paper reel 4,000 pieces per reel

L W T Resonance Code Table

1.60±0.15 0.80±0.15 0.90 max. 0=None
0603 (0.063±0.006) (0.031±0.006) (0.035 max.) 2=880 MHz
2.00±0.20 1.25±0.20 1.30 max. 4=1800 MHz
0805 (0.079±0.008) (0.049±0.008) (0.051 max.)
6=1900 MHz
8=2400 MHz

Typical Performance Characteristics

Frequency Tolerance 3%
Voltage Rating 50V

Typical Insertion Loss (S21) For 0603 DRC

S21 FORWARD TRANSMISSION
LOG MAG. REF = -19.000dB 5.000dB/DIV

Marker 1
0.883 GHz
-28.203 dB
2
1 Marker 2
1.805 GHz
-22.686 dB

0.1000 GHz 0.0000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #031. Visit our website http://www.avxcorp.com

31
Integrated Passive Components (IPC)
LICA® Low Inductance Decoupling Capacitor Arrays
C4 and Pad Dimensions: millimeters HOW TO ORDER
0.8 ± .03 (2 plcs)
0.6 ± .100
j "Centrality"* LICA 3 T 802 P 1 C C 4
1 2 3 4 56 7 8 9
0.925 ± .03 1 Style and Size
"L" ± .06 mm 2 Voltage: 25V = 3
Vertical and 0.925 ± .03 3 Dielectric: T = T60T
Horizontal Pitch
0.4 ± .02 mm 4 Cap/Section
(EIA Code): 102 = 1000 pF 103 = 10 nF
C4 Ball Code Face (Optional)
104 = 0.1 mF
diameter: 5 Capacitance Tolerance: M = ±20%, P = GMV
0.132 ±.015 mm
*NOTE: The C4 6 Height Code: 1 = 0.875mm, 3 = 0.650mm
"Ht" = (Hb + .1 mm typ) "Hb" ± .06 pattern will be
within 0.1 mm
7 Termination: C = C4 Solder Balls-97/3
of the center of O = Others
the LICA body, A = Thin-film
"W" ± .06 mm in both axes.
8 Reel Packaging:
Code Width Length Height M = 7" Reel C = 4"x4" Waffle Pack
(Body Height) (W) (L) Body (Hb) R = 13" Reel U = Termination Side Up
1 1.600mm 1.850mm 0.875mm 6 = 2"x2" Waffle Pack In 4"x4" Waffle Pack
3 1.600mm 1.850mm 0.650mm 9 Number of Caps/Parts: 1 = one, 2 = two, 4 = four
Table 1
Typical Parameters T60T Units Typical Parameters T60T Units
Capacitance, 25°C Co Nanofarads Dielectric Breakdown, Min 500 Volts
Capacitance, 60°C 1.4 x Co Nanofarads Rated Voltage 25 Volts
Capacitance, 85°C Co Nanofarads Thermal Coefficient of Expansion 8.5 ppm/°C 25-100°
Dissipation Factor 25° 8 Percent Inductance: (Design Dependent) 15 to 120 Pico-Henries
DC Resistance 0.2 Ohms Use Frequency DC to 1 Gigahertz
IR, Minimum 25° (QUAD) 4.5 Gigaohms Ambient Temp Range -55° to 125°C

Configuration and Capacitance Options (Co)

Single Capacitor Design
Typical nanofarads (nF) per section Schematic Code
D B
25V Rated
Single
1 Cap/Unit
0.875 0.650 CAP D C B A

T60T 130 90 C A

Double Capacitor Design

Typical nanofarads (nF) per section Schematic Code
D1 B1 D2 B2

25V Rated
D1 C1 B1 A1
Double
2 Caps/Unit
0.875 0.650 CAP 1 CAP 2

T60T 60 40 C1 A1 C2 A2
D2 C2 B2 A2

Quadruple Capacitor Design

Typical nanofarads (nF) per section Schematic Code
D1 B1 D2 B2
D1 C1 B1 A1
25V Rated CAP 1 CAP 2 D2 C2 B2 A2
Quad
4 Caps/Unit
0.875 0.650 C1 A1 C2 A2
D3 C3 B3 A3

D4 C4 B4 A4
T60T 25 18 D3 B3 D4 B4

CAP 3 CAP 4

C3 A3 C4 A4

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #032. Visit our website http://www.avxcorp.com

32
Radial Leads/SkyCap®
SR Series
Dimensions: Millimeters (Inches)
HOW TO ORDER
W
W
Max. H Max.
Max. SR21 5 E 104 M A A TR 1
H Max.

LD
1 2 3 4 5 6 7 8
LD
Nom. T
Max.
Nom.
T
1 AVX Style and Size: SR15, SR20, SR21, SR22, SR27,
Max.
1.52/.060 1.0" Min.
See Note
SR30, SR40, SR50
2 Voltage: 50V = 5, 100V = 1, 200V = 2
Max.
LD
1.0" Min. Nom.
L.S.
L.S. +.762/.030

3 Dielectric: NP0 = A, X7R = C, Z5U = E

+.762/.030 -
- 45 o

4 Capacitance Code
Styles SR15, SR20, Style SR22/SR27
SR30, SR40, SR50 W Max.

.031 Clean
H 5 Tolerance: NP0: C = ±.25pF, D = ±.5pF,
Above Seat F = ±1.0%(>50pF only),
G = ±2.0% (>25pF only),
Style
J = ±5%, K = ±10%
SR21/SR59/SR65
1.00 Min.
X7R: J = ±5%, K = ±10%, M = ±20%
.200 ±.030 Z5U: M = ±20%, Z = +80%, -20%
Note: Coating clean .784/.031 min. above seating plane
6 Failure Rate: A = Not Applicable, T = CECC Release
Standard Packaging 7 Leads: T = Trimmed Leads, .230"±.030"
A = Long Leads, 1.0" minimum
BULK TAPE & REEL AMMO
14" 8 Packaging: Bulk = Blank
SR15 1,000 3,500 3,500 Tape and Reel = TR1 (Standard 1) or
SR20 1,000 3,000 3,000 TR2 (Standard 2)
SR21 1,000 3,000 3,000 Ammo = AP1 (Standard 1) or
SR22 1,000 N/A N/A AP2 (Standard 2)
SR27 1,000 N/A N/A Marking is as size permits in descending order.
SR30 1,000 2,000 2,000 (For code identification, see How to Order section)
SR40 500 2,000 2,000 — Capacitance Code — Voltage Code
— Tolerance Code — Temperature Coefficient Code
SR50 500 N/A N/A — A (AVX) — 3-Digit EIA Date Code/Lot Code
Dimensions: millimeters (inches)
AVX Style SR15 SR20 SR21 SR22 SR27 SR30 SR40 SR50
AVX “Insertable” SR07 SR29 SR59 N/A N/A SR65 SR75 N/A
Width 3.81 5.08 5.08 5.08 6.604 7.62 10.16 12.70
(W) (0.150) (0.200) (0.200) (0.200) (0.260) (0.300) (0.400) (0.500)
Height 3.81 5.08 5.08 5.08 6.35 7.62 10.16 12.70
(H) (0.150) (0.200) (0.200) (0.200) (0.250) (0.300) (0.400) (0.500)
Thickness 2.54 3.175 3.175 3.175 4.06 3.81 3.81 5.08
(T) (0.100) (0.125) (0.125) (0.125) (0.160) (0.150) (0.150) (0.200)
Lead Spacing 2.54 2.54 5.08 6.35 7.62 5.08 5.08 10.16
(L.S.) (0.100) (0.100) (0.200) (0.250) (0.300) (0.200) (0.200) (0.400)
Lead Diameter .508 .508 .508 .508 .508 .508 .508 .635
(L.D.) (0.020) (0.020) (0.020) (0.020) (0.020) (0.020) (0.020) (0.025)

Capacitance Range
Capacitance NP0 X7R Z5U
Size Range 50V 100V 200V 50V 100V 200V 50V 100V
Min. 330pF 100pF 1.0pF 470pF 470pF 470pF .01µF .01µF
SR15 Max. 1000pF 680pF 220pF .022µF .01µF 3300pF .047µF .01µF
Min. 1500pF 1000pF 330pF .033µF .015µF 470pF 0.1µF .047µF
SR20 Max. 8200pF 6800pF 2200pF 0.22µF 0.1µF .033µF 1.0µF .22µF
Min. 1000pF 330pF 1.0pF 1000pF 1000pF — .01µF .01µF
SR21 Max. 8200pF 6800pF 2200pF 0.22µF 0.1µF — 1.0µF .22µF
Min. 1000pF 330pF 1.0pF 1000pF 1000pF — .01µF .01µF
SR22 Max. 8200pF 6800pF 2200pF 0.22µF 0.1µF — 1.0µF .22µF
Min. 1000pF 330pF 1.0pF 1000pF 1000pF — .01µF .01µF
SR27 Max. 6800pF 3900pF 2200pF 0.22µF 0.1µF — 1.0µF .22µF
Min. .01µF 8200pF — .33µF .15µF 470pF .68µF .33µF
SR30 Max. .033µF .022µF — 1.0µF .47µF .22µF 3.3µF 1.0µF
Min. .039µF .033µF — 2.2µF 1.0µF 470pF 4.7µF 1.5µF
SR40 Max. .068µF .047µF — 2.7µF 1.0µF .39µF 4.7µF 2.2µF
Min. .01µF .01µF — 1.0µF .33µF 470pF 1.0µF 1.0µF
SR50 Max. .1µF .068µF — 4.7µF 2.2µF .39µF 4.7µF 2.2µF
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #033. Visit our website http://www.avxcorp.com

33
Radial Leads/Ceralam®
MR04/05/06/07/08
Dimensions: Millimeters (Inches)
HOW TO ORDER
1.14 (.045) W
Max.
L
T
MR05 1 A 561 J A A
31.7 (1.25)
Min.
1 23 4 5 6 7
L.D. W
L
1 AVX Style and Size:
MR04, MR05, MR06, MR07, MR08
T
L.S.
31.7 (1.25)
Min. 2 Voltage: 50V=5, 100V=1, 200V=2
3 Dielectric: NP0=A, X7R=C, Z5U=E
Style MR05
L.D. 4 Capacitance Code
L.S. Styles MR04, MR06, 5 Tolerance:
MR07, MR08
NP0: D=±.5pF (<10pF only)
Marking is as size permits: for code identification see F=±1.0% (>50pF only)
How To Order. G=±2.0% (>25pF only)
— AVX J=±5%, K=±10%
— Capacitance and Tolerance
— Voltage Rating
X7R: J=±5%, K=±10%, M=±20%
— Temperature Coefficient Z5U: M=±20%, Z=+80%, -20%
— Date Code 6 Failure Rate:
— Lot Code A= Does Not Apply, T = CECC Release
Standard Packaging 7 Leads: A = Standard Solderable
T1 = Trimmed Leads, .230"±.030"
BULK TAPE & REEL AMMO
14"
1
Trimmed lead length for the MR05 style will
MR04 1,000 2,500 2,500 be measured from the bend in the lead
MR05 1,000 2,500 2,500 (seating plane).
MR06 1,000 2,500 2,500
MR07 300 N/A N/A
MR08 300 N/A N/A

Dimensions: millimeters (inches)

AVX Style MR04 MR05 MR06 MR07 MR08
Length ±0.25 (±0.010) 4.83 (0.190) 4.83 (0.190) 7.36 (0.290) 12.44 (0.490) 12.44 (0.490)

Width ±0.25 (±0.010) 4.83 (0.190) 4.83 (0.190) 7.36 (0.290) 12.44 (0.490) 12.44 (0.490)

Thickness ±0.25 (±0.010) 2.28 (0.090) 2.28 (0.090) 2.28 (0.090) 3.55 (0.140) 6.09 (0.240)

Lead Spacing ±0.38 (±0.015) 2.54 (0.100) 5.08 (0.200) 5.08 (0.200) 10.16 (0.400) 10.16 (0.400)
Lead Diameter ±0.05 (±0.002) .635 (0.025) .635 (0.025) .635 (0.025) .635 (0.025) .635 (0.025)

Capacitance Range
Size Capacitance NP0 X7R Z5U
Range 50V 100V 200V 50V 100V 200V 50V 100V
Min. 1.0pF 1.0pF 1.0pF 100pF 100pF 100pF .01µF .01µF
MR04 Max. 8200pF 4700pF 1200pF .15µF .068µF .015µF .39µF .22µF
Min. 1.0pF 1.0pF 1.0pF 100pF 100pF 100pF .01µF .01µF
MR05 Max. 8200pF 4700pF 1200pF .15µF .068µF .015µF .39µF .22µF
Min. .01µF 5600pF 1500pF .18µF .082µF .018µF .47µF .27µF
MR06 Max. .022µF .015µF 3900pF 1.0µF .68µF .047µF 1.0µF .47µF
Min. 2200pF 2200pF 2200pF 5600pF 5600pF 5600pF 0.1µF 0.1µF
MR07 Max. 0.1µF .082µF 4700pF 3.3µF 2.2µF .47µF 4.7µF 2.2µF
Min. 0.12µF 0.10µF 5600pF 3.9µF 2.7µF 0.56µF 5.6µF 2.7µF
MR08 Max. 0.15µF 0.12µF 6800pF 4.7µF 3.9µF 1.0µF 10.0µF 3.3µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #034. Visit our website http://www.avxcorp.com

34
Two Pin DIP/DIPGuard®
MD01/02/03
T
HOW TO ORDER
L MAX.
MD01 5 E 104 M A B
SEE
H1 H2 1 23 4 5 67
MAX.
NOTE 1 MAX.
1 AVX Style and Size: MD01, MD02, MD03
SEE 2 Voltage: 50V= 5, 100V = 1
NOTE 2
.015
.148
±.028 3 Temp. Coefficient: NP0 = A, X7R = C, Z5U = E,
.325 MIN.
±.035 Y5V = G
.012
±.004 .400 max. .019 ± .004 4 Capacitance Code
.0575 ± .0125 5 Capacitance Tolerance:
NP0: F = ±1%, J = ±5%, K = ±10%
X7R: J = ±5%, K = ±10%, M = ±20%
60° TYP.
±20°
Z5U: M = ±20%, Z = +80%, -20%
Y5V: M = ±20%, Z = +80%, -20%
Note 1 = Leads centered within ±.010" .019 ±.004 6 Failure Rate: A = Not Applicable
Note 2 = Angle shall be 95°, +10°, -5°
.010 MAX. 7 Assembly Method: B = Automated Assembly

Marking Standard Packaging: 200 pieces per slide pack.

Part Number Example ±.005
.025 ±.002
MD015 E 104MAB Top of Unit: WT .123 DIA. THRU 2 HOLES

A 5 E 104 M
HI
HO
AVX Tolerance Code HC
Dielectric
Voltage A = NP0 3 Digit Code
1, 2, or 5 C = X7R For Capacitance WC L
E = Z5U See Table WI
G = Y5V WO

Slide Package Dimensions

MD01 MD02 MD03
(HO) Overall Height .400 ref. .430 ref. .545 ref.
(HC) Channel Height .141 ± .006 .171 ± .006 .295 ± .010
(HI ) Inside Height .350 .380 .495
(WO) Overall Width .540 ref. .540 ref. .600 ref.
(WI ) Inside Width .490 .490 .550
(WC ) Channel Width .210 .210 .170
(WT) Top Width .350 .310 .300
(L) Length 20.073 ± .06 20.073 ± .06 20.073 ± .06
Dimensions: millimeters (inches)
AVX Style Length (L) Height (H1) Height(H2) Thickness
6.60 3.43 4.19 2.54
MD01 (0.260±0.020) (0.135 max.) (0.165 max.) (0.100 max.)
6.60 4.19 5.08 2.54
MD02 (0.260±0.020) (0.165 max.) (0.200 max.) (0.100 max.)
6.60 7.37 8.13 2.54
MD03 (0.260±0.020) (0.290 max.) (0.320 max.) (0.100 max.)

Capacitance Range
Capacitance NP0 X7R Z5U Y5V
Size
Range 50V 100V 50V 100V 50V 16V 50V
Min. 10pF 10pF 220pF 220pF .01µF 1.0µF —
MD01 Max. 3300pF 150pF 0.1µF .01µF .33µF 3.3µF —
Min. 4700pF — .15µF — .47µF — 1.0µF
MD02 Max. .01µF — .22µF — .47µF — 1.0µF
Min. — — .33µF — .68µF — —
MD03 Max. — — 1.0µF — 1.0µF — —

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #035. Visit our website http://www.avxcorp.com

35
Axial Leads/SpinGuard®
SA Series
.483 + .05mm ( + .002")
( .019" ) - - HOW TO ORDER
D
SA10 5 E 104 Z A A
1 2 3 4 567
Max.

1 AVX Styles and Sizes:

SA05, SA10, SA11, SA20, SA30, SA40
L
Max.
2 Voltages: 50V=5, 100V=1, 200V=2
Lead Length
3 Dielectric: NP0=A, X7R=C, Z5U=E
Min.
4 Capacitance Code
5 Capacitance Tolerance:
Marking NP0: C=+0.25pF, D=±.5pF, F=±1%,
VOLTAGE
(5 = 50V) G=±2%, J=±5%, K=±10%
AVX TC
(E = Z5U)
X7R: J=±5%, K=±10%, M=±20%
A 5 E Z5U: M=±20%, Z=+80%, -20%
1 0 4
CAP CODE
6 Failure Rate: A = Not Applicable, T = CECC Release
AND MULTIPLIER 7 Packaging:
Z A B

9 1 0
A = Standard Reels
ALPHA-ALPHA,
LOT CODE B = 1000 piece reels (distributors only, tight
TOLERANCE
(Z = +80, -20%)
AB = LOT #2 IN WEEK tolerance only)
YEAR (1999) WEEK (10th) C = AMMO Pack
D thru J = See Special Lead Configurations
Standard Packaging L = Twin Coat Leads (95/5 Flash Tin/Lead)
TAPE & REEL AMMO M = 26mm tape and reel
14"
N = 26mm ammo pack
SA05 7,500 4,000
SA10 7,500 4,000
SA11 5,000 2,000
SA20 5,000 4,000
SA30 5,000 2,000
SA40 5,000 2,000

Dimensions: millimeters (inches)

AVX Style SA05 SA10 SA11 SA20 SA30 SA40
Length 3.00 4.32 4.32 6.60 7.37 10.16
(L) (0.118) (0.170) (0.170) (0.260) (0.290) (0.400)
Diameter 2.30 2.54 3.05 2.54 3.81 3.81
(D) (0.090) (0.100) (0.120) (0.100) (0.150) (0.150)
Lead .483 .483 .483 .483 .483 .483
Diameter (0.019) (0.019) (0.019) (0.019) (0.019) (0.019)
Lead 25.4 25.4 25.4 25.4 25.4 25.4
Length (1.000) (1.000) (1.000) (1.000) (1.000) (1.000)

Capacitance Range
Size Capacitance NP0 X7R Z5U
Range 50V 100V 200V 50V 100V 200V 50V 100V
Min. — 150pF 1.0pF 8200pF 560pF 220pF 0.01µF —
SA05 Max. — 560pF 120pF .018µF 6800pF 470pF 0.1µF .—
Min. 1000pF 150pF 1.0pF 8200pF 560pF 220pF .01µF .01µF
SA10 Max. 1200pF 1000pF 120pF 0.1µF .015µF .01µF .22µF .047µF
Min. 1800pF 1000pF — .047µF .018µF — .22µF .1µF
SA11 Max. 3900pF 2700pF — 0.1µF .039µF — .47µF .1µF
Min. 1800pF 1000pF — .027µF 8200µF — .047µF .033µF
SA20 Max. 3300pF 1800pF — 0.1µF .033µF — .22µF .047µF
Min. 4700pF 1800pF — .056µF .022µF — .47µF .068µF
SA30 Max. 5600pF 3900pF — .33µF 0.1µF — 1.0µF .33µF
Min. 8200pF 4700pF — .33µF .12µF — — .15µF
SA40 Max. .012µF 8200pF — .47µF .18µF — — .47µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #036. Visit our website http://www.avxcorp.com

36
Axial & Radial Leads/Mini-Ceramic Capacitor
MC01-4 Series Radial & Axial Leads
1.1
HOW TO ORDER
(0.040) MC02 Y C 222 K A A
1.3 (0.050) Max.
Max. 1 2 3 4 567
1.1 (0.040)
1.3 (0.050)
Max.
1 AVX Style: MC01, MC02, MC03, MC04
Max.
2 Voltages: 16V=Y, 10V=Z, 6V=6
3 Temperature Characteristics:
X7R=C, Y5V=G
2.5 (0.100) .18 ±.035
Max. (.007 ±.001) 4 Capacitance Code
5 Capacitance Tolerance:
2.5 (0.100) X7R: J=±5%, K=±10%, M=±20%
Max.
Y5V: Z=+80%, -20%
0.825 (0.030) 6 Failure Rate: Standard
MC01 7 Lead Configuration: A=Axial
MC02 R=Radial (MC01 only)
1.3 1.0
(0.050) (0.040) Packaging Standard
Max. Max.
100 pieces per bag
1.9 (0.075) 1.0 (0.040)
Max. Max. Marking
Three digit Capacitance Code
.18 ±.035
(.007 ±.001) Color coded Capacitance Tolerance:
.18 ±.035
(.007 ±.001) ±5% = Gold Dot
±10% = Silver Dot
2.9 1.9 (0.075)
(0.115) Max.
Max.

MC03 MC04
Dimensions: mm (inch)

Capacitance Specifications
Cap. in Typical AVX Cap. in Typical AVX Cap. Typical AVX Cap. in Typical AVX
pF Part Nos. pF Part Nos. in pF Part Nos. pF Part Nos.
MC01 (16V) MC02-X7R (16V) MC03 MC04-X7R (16V)
1000 MC01YC102KAR 1000 MC02YC102KAA µF X7R (16V) µF Y5V (10V) 1000 MC04YC102KAA
1500 MC01YC152KAR 1500 MC02YC152KAA .33 MC03YC334KAA 2.2 MC03ZG225Z 1500 MC04YC152KAA
2200 MC01YC222KAR 2200 MC02YC222KAA .47 MC03YC474KAA 2200 MC04YC222KAA
3300 MC01YC332KAR 3300 MC02YC332KAA 1.0 MC03YC105KAA 3300 MC04YC332KAA
4700 MC01YC472KAR 4700 MC02YC472KAA 4700 MC04YC472KAA
5600 MC01YC562KAR 5600 MC02YC562KAA 5600 MC04YC562KAA
6800 MC01YC682KAR 6800 MC02YC682KAA 6800 MC04YC682KAA
8200 MC01YC822KAR 8200 MC02YC822KAA 8200 MC04YC822KAA
10,000 MC01YC103KAR 10,000 MC02YC103KAA 10,000 MC04YC103KAA
15,000 MC01YC153KAR 15,000 MC02YC153KAA
22,000 MC01YC223KAR 22,000 MC02YC223KAA 15,000 MC04YC153KAA
(6V) 33,000 MC02YC333KAA 22,000 MC04YC223KAA
47,000 MC02YC473KAA (6V)
33,000 MC016C333KAR
47,000 MC016C473KAR 68,000 MC02YC683KAA 33,000 MC046C333KAA
68,000 MC016C683KAR 100,000 MC02YC104KAA 47,000 MC046C473KAA
100,000 MC016C104KAR (6V) 68,000 MC046C683KAA
220,000 MC026C224KAA 100,000 MC046C104KAA
330,000 MC026C334KAA
470,000 MC026C474KAA
680,000 MC026C684KAA
1,000,000 MC026C105KAA

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #037. Visit our website http://www.avxcorp.com

37
Axial Leads/Ceralam®
MA10/20/30/40/50/60
HOW TO ORDER
L
MA10 5 E 104 Z A A
LD 1 2 3 4 5 6 7
1 AVX Styles and Sizes:
MA10, MA20, MA30, MA40, MA50, MA60
D
2 Voltages: 50V = 5, 100V = 1, 200V = 2
3 Dielectric: NP0 = A, X7R = C, Z5U = E
Lead Length
Min. 4 Capacitance Code
5 Capacitance Tolerance:
NP0: F = ±1.0%, J = ±5%, K = ±10%, M = ±20%,
D = ±.5pF <10pF only
Marking X7R: J = ±5%, K = ±10%, M = ±20%
Z5U: M = ±20%, Z = +80%, -20%
Line 1, A (for AVX), 5 = 50 Volts (V is optional), E = TC
Line 2, 104 = Capacitance Code 6 Failure Rate: Standard
Line 3, Tolerance, 2 digit Lot Code 7 Leads: Standard
Date Code: 9 = 1999
10 = Week
Four Digit Date Code Optional ‡ C tolerance available NP0 from 1.0 to 9.1 pF only.
Minimum tolerance for values 10pF - 100pF is D or F,
whichever is greater.
Standard Packaging
BULK TAPE & REEL AMMO
14"
MA10 100 5,000 4,000
MA20 100 5,000 4,000
MA30 100 3,000 2,000
MA40 100 3,000 2,000
MA50 50 950 N/A
MA60 50 650 N/A

Dimensions: millimeters (inches)

AVX Style MA10 MA20 MA30 MA40 MA50 MA60
4.07±.25 6.35±.25 6.09±.25 9.91±.25 12.7±.51 17.53±.51
Length (0.160±0.010) (0.250±0.010) (0.240±0.010) (0.390±0.010) (0.500±0.020) (0.690±0.020)
2.29±.25 2.29±.25 3.30±.25 3.56±.25 6.35±.38 8.89±.51
Diameter (0.090±0.010) (0.090±0.010) (0.130±0.010) (0.140±0.010) (0.250±0.015) (0.350±0.020)
Lead .48±.05 .48±.05 .48±.05 .63±.05 .63±.05 .63±.05
Diameter (0.019±0.002) (0.019±0.002) (0.019±0.002) (0.025±0.002) (0.025±0.002) (0.025±0.002)
Lead 25.4 25.4 25.4 25.4 25.4 25.4
Length (1.000) (1.000) (1.000) (1.000) (1.000) (1.000)

Capacitance Range
Size Capacitance NP0 X7R Z5U
Range 50V 100V 200V 50V 100V 200V 50V 100V 200V
MA10 Min. 1.0pF 1.0pF 1.0pF 220pF 220pF 220pF 1000pF 1000pF 1000pF
Max. 1000pF 820pF 180pF .022µF 6800pF 1200pF .1µF .022µF 4700pF
MA20 Min. 82pF 82pF 82pF 220pF 220pF 220pF 3300pF 3300pF 3300pF
Max. 1800pF 1500pF 330pF .056µF .018µF 2700pF .12µF .047µF .012µF
MA30 Min. 120pF 120pF 120pF 560pF 560pF 560pF 5600pF 5600pF 5600pF
Max. 5600pF 4700pF 1200pF .1µF .047µF 6800pF .47µF .1µF .027µF
MA40 Min. 180pF 180pF 180pF 1000pF 1000pF 1000pF .01µF .01µF .01µF
Max. .012µF 6800pF 2200pF .27µF .10µF .022µF 1.0µF .22µF .068µF
MA50 Min. 1000pF 1000pF 1000pF 3300pF 3300pF 3300pF .033µF .033µF .033µF
Max .056µF .033µF 8200pF 1.0µF .33µF .068µF 2.2µF .56µF .18µF
MA60 Min. 3300pF 3300pF 3300pF .01µF .01µF .01µF .1µF .1µF .1µF
Max. 0.15µF 0.1µF 0.033µF 3.3µF 1.0µF 0.33µF 8.2µF 2.7µF 0.82µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #038. Visit our website http://www.avxcorp.com

38
MIL-PRF-39014/Radial Leads
CKR04/05/06/08
L.D. W T HOW TO ORDER
CKR05 BX 104 K S (V)
L.S. L Figure 1 1 2 3 4 5 6
1 Military Type Designation:
1.250
Min. Styles CKR04, CKR05, CKR06, CKR08
W
L.D.
Slash Number Option: MIL-PRF-39014/01/02/20/23
(Appropriate Dash Number)
L L.S.
Figure 2 2 Voltage-Temperature Limits:
First letter identifies temperature range.
1.250
Min. B = -55°C to +125°C
Second letter identifies voltage-temperature
L T L T coefficient.
Capacitance Change with Reference to 25°C
W
W Second Letter No Voltage Rated Voltage
X +15,-15% +15,-25%
1.250 Min. L.D.
1.250 Min. L.D.
3 Capacitance Code
L.S.
L.S. 4 Capacitance Tolerance: K = ±10%, M = ±20%
Figure 3 Figure 4 5 Military Failure Rate: M = 1% per 1000 hours;
P = 0.1% per 1000 hours; R = 0.01% per 1000 hours;
S = 0.001% per 1000 hours
Dimensions: millimeters (inches) (CKR08 - “M” Level only)
Per Mil Note: AVX reserves the right to substitute a lower
Spec Case Size
failure rate part per MIL-PRF-39014. Substitutability for
MIL- Length Width Thickness Lead Lead failure rate levels shall be as follows:
PRF- (L) (W) (T) Spacing Diameter
39014 (L.S.) (L.D.) Failure Rate Level Will Replace Failure Rate Level
CKR04 4.83±.25 4.83±.25 2.29±.25 2.54±.38 .64±.05
(Fig. 2) (0.190±0.010) (0.190±0.010) (0.090±0.010) (0.100±0.015) (0.025±0.002)
S (STD) (X-ray) R,P,M,L
CKR05 4.83±.25 4.83±.25 2.29±.25 5.08±.38 .64±.05 R (STD) (No X-ray) P,M,L
(Fig. 1,4) (0.190±0.010) (0.190±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002) P M,L
CKR06 7.37±.25 7.37±.25 2.29±.25 5.08±.38 .64±.05 M L
(Fig. 2,3) (0.290±0.010) (0.290±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002)
CKR08 7.37±.25 7.37±.25 3.68±.38 5.08±.38 .64±.05
(Fig. 2) (0.290±0.010) (0.290±0.010) (0.145±0.015) (0.200±0.015) (0.025±0.002)
6 To order standoff option: place “V” at the end of
the part number. For example: CKR05BX104KSV.

Marking Radial Lead Standard Packaging

Date Code BULK TAPE & REEL AMMO
Front CKR04/CKR05 Back CKR06/CKR08
J for JAN 9907 A
Lot Code 14"
M390 Abb. Military Part Number J AVX M39014 Abb. Military Part Number
14/01 Military Slash Number 9907 Mfg. I.D. Symbol 2-1350 Military Slash/Dash Number J 50V J for JAN
Voltage Rating
CKR04 100 2,500 2,500
1593 Military Dash Number A Date Code AVX Mfg. I.D. Symbol
Lot Code
105K
Capacitance Value CKR05 100 2,500 2,500
(3 digit code)
& Cap. Tol. CKR06 100 2,500 2,500
CKR08 100 1,500 1,500

Capacitance Range, pF
Mil Type Temperature Min. Max. Tolerance WVDC
Characteristic
CKR04 BX 10 1,000 10%, 20% 200
BX 1,200 10,000 10%, 20% 100
BX 12,000 100,000 10%, 20% 50
CKR05 BX 10 1,000 10%, 20% 200
BX 1,200 10,000 10%, 20% 100
BX 12,000 100,000 10%, 20% 50
CKR06 BX 1,200 10,000 10% 200
BX 12,000 100,000 10% 100
BX 120,000 1,000,000 10% 50
CKR08 BX 1,200,000 2,000,000 10% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #039. Visit our website http://www.avxcorp.com

39
MIL-PRF-39014/2 Pin DIP
CKR22/23/24
T
MAX.
HOW TO ORDER
L
CKR22 BX 104 K R
SEE
NOTE 1
H1
MAX. H2 1 2 3 4 5
MAX.
1 Style:CK = General purpose, ceramic dielectric,
SEE fixed capacitors.
NOTE 2 See R = Established Reliability parts.
.015 Note 3
.325 MIN 22 = Remaining two numbers identify
±.035
.012
shape and dimension.
.400 max. .019 ±.004
±.004
.058 ±.012
2 Voltage-Temperature Limits:
First letter identifies temperature range.
B = -55°C to +125°C
60° TYP. C = -55°C to +150°C
±20° Second letter identifies voltage-temperature
Note 1 = Leads centered within ±.005" coefficient.
Note 2 = Angle shall be 95°, +10°, -5° .019 ± .004
Note 3 = .140 ± .020 inch (3.56 ±0.51 mm) for .010 MAX. Capacitance Change with Reference to 25°C
standard lead length; .170 ±.010 inch
(4.32 ±0.25 mm) for optional longer Second
lead length. Letter No Voltage Rated Voltage

G +30, -30ppm +30,-30ppm

H +60, -60ppm +60,-60ppm
Dimensions: millimeters (inches) R +15, -15% +15,-40%
MIL-PRF- X +15, -15% +15,-25%
39014 Length (L) Height (H1) Height (H2) Thickness
6.60 3.25 4.45 max. 2.34
CKR22 (0.260±0.020) (0.128±0.007) (0.175) (0.092±0.006) 3 Capacitance Code
CKR23 6.60 3.94
(0.260±0.020) (0.155±0.007)
4.95 max.
(0.195)
2.34
(0.092±0.006)
4 Capacitance Tolerance: D=±.5pF, F=±1%, J=±5%,
K=±10%, M=±20%
6.60 7.19 8.13 max. 2.34
CKR24 (0.260±0.020) (0.283±0.007) (0.320) (0.092±0.006) 5 Military Failure Rate:
M=1% per 1000 hours R=0.01% per 1000 hours
Marking P=0.1% per 1000 hours S=0.001% per 1000 hours
Note: AVX reserves the right to substitute a lower failure
7
0
9

rate part per MIL-PRF-39014. Substitutability for failure

A
1
0
0
0

Date Code (year and week) rate levels shall be as follows:

Trademark
4-Digit Dash Number

Failure Rate Level Will Replace Failure Rate Level

S (STD) (X-ray) R, P, M, L
R (STD) (No X-ray) P, M, L
P M, L
Standard Packaging M L
200 pcs/slide pack.

Capacitance Range, pF
Mil Type Temperature Min. Max. Tolerance WVDC
Characteristic
CKR22 CG 1.0 470 D*, F, J, K 200
CG 560 2,200 F, J, K 100
CG 2,700 10,000 F, J, K 50
BX 270 820 K, M 200
BX 1,000 10,000 K, M 100
BX 12,000 100,000 K, M 50
CKR23 CG 560 1,200 F, J, K 200
CG 2,700 3,300 F, J, K 100
CG 4,700 10,000 F, J, K 50
BX 1,000 10,000 K, M 200
BX 12,000 100,000 K, M 100
BX 120,000 220,000 K, M 50
CKR24 BR 120,000 150,000 K, M 100
BR 180,000 1,000,000 K, M 50
* ±0.5pF closest tolerance available for 1.0pF to 56pF.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #040. Visit our website http://www.avxcorp.com

40
MIL-PRF-39014/Axial Leads
CKR11/12/14/15/16
HOW TO ORDER
L
1.25
MIN.
D CKR11 BX 103 K S
L.D. 1 2 3 45
1 Military Type Designation:
Styles CKR11, CKR12, CKR14, CKR15, CKR16
Slash Number Option
MIL-PRF-39014/05 (Add appropriate dash number
from AVX Leaded Catalog)
2 Voltage-Temperature Limits:
Dimensions: millimeters (inches) First letter identifies temperature range.
B = -55°C to +125°C
Per Mil Case Size
Spec Second letter identifies voltage-temperature
coefficient.
MIL-PRF-39014 Length Diameter Lead Diameter
(L) (D) (L.D.) Capacitance Change with Reference to 25°C
4.07±.25 2.29±.25 .48±.05 Second
CKR11 No Voltage Rated Voltage
(0.160±0.010) (0.090±0.010) (0.019±0.002)
Letter
6.35±.25 2.29±.25 .48±.25
CKR12 R +15,-15% +15,-40%
(0.250±0.010) (0.090±0.010) (0.019±0.010)
9.91±.25 3.56±.25 .63±.25 X +15,-15% +15,-25%
CKR14 (0.390±0.010) (0.140±0.010) (0.025±0.010)

CKR15 12.7±.51 6.35±.38 .63±.05 3 Capacitance Code

(0.500±0.020) (0.250±0.015) (0.025±0.002)
17.53±.51 8.89±.51 .63±.05
4 Capacitance Tolerance: K = ±10%, M = ±20%
CKR16 (0.690±0.020) (0.350±0.020) (0.025±0.002) 5 Military Failure Rate: M = 1% per 1000 hours
P = 0.1% per 1000 hours
R = 0.01% per 1000 hours
Marking S = 0.001% per 1000 hours

CKR11 CKR12
JA J for JAN, A for AVX CKR12 Style
100 Capacitance Value (3 digit code) 2257J Military Slash/Dash Number “J” or “
KS99 K for Cap. Tol. code (K±10%, M±20%) 9907AA 4 digit Date Code, 2 digit Lot Code
11AA S for failure rate, 2 digit year 04222 AVX FSCM
2 digit week, 2 digit Lot Code

CKR14, 15, 16
Standard Packaging
Abb. Military Part Number
M39014 Military Slash/Dash Number BULK TAPE & REEL AMMO
5-2291 Mfg. I.D. Symbol
AVX 4 digit Date Code, 2 digit Lot Code
14"
9907AA
J50V “J” Brand Symbol, Voltage CKR11 100 5,000 4,000
104K Capacitance Value (3 digit code)
and Cap. Tolerance CKR12 100 5,000 4,000
CKR14 100 3,000 2,000
CKR15 50 950 N/A
CKR16 50 650 N/A

Capacitance Range, pF
Mil Type TC Min. Max. Tolerance WVDC
CKR11 BX 10 4,700 10%, 20% 100
BX 5,600 10,000 10%, 20% 50
CKR12 BX 5,600 10,000 10%, 20% 100
BX 12,000 47,000 10%, 20% 50
CKR14 BX 12,000 47,000 10%, 20% 100
BX 56,000 100,000 10%, 20% 50
BR 56,000 100,000 10%, 20% 100
BR 120,000 270,000 10%, 20% 50
CKR15 BX 56,000 100,000 10%, 20% 100
BR 120,000 330,000 10%, 20% 100
BR 470,000 1,000,000 10%, 20% 50
CKR16 BR 470,000 1,000,000 10%, 20% 100
BR 2,200,000 3,300,000 10%, 20% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #041. Visit our website http://www.avxcorp.com

41
MIL-PRF-11015/Radial Leads
CK05/06

L.D. W T
HOW TO ORDER
CK05 BX 104 K
L.S. L Figure 1 1 2 3 4
1 Style:
1.250
Min.
CK = General purpose, ceramic dielectric,
W fixed capacitors.
L.D.
05 = Remaining two numbers identify shape
L L.S.
Figure 2 and dimension.
2 Voltage-Temperature Limits:
1.250
Min.
First letter identifies temperature range.
B = -55°C to +125°C
Second letter identifies voltage-temperature
Dimensions: millimeters (inches) coefficient.
Per MIL Case Size
Spec Capacitance Change with Reference to 25°C
MIL- Lead Lead Second No Voltage Rated Voltage
PRF- Length Width Thickness Spacing Diameter Letter
11015 (L) (W) (T) (L.S.) (L.D.)
CK05 4.83±.25 4.83±.25 2.29±.25 5.08±.38 .64±.05 X +15,-15% +15,-25%
(Fig. 1) (0.190±0.010) (0.190±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002)
CK06 7.37±.25 7.37±.25 2.29±.25 5.08±.38 .64±.05
(Fig. 2) (0.290±0.010) (0.290±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002) 3 Capacitance Code
4 Capacitance Tolerance: K = ±10%, M = ±20%

Marking Standard Packaging

CK05/CK06 BULK TAPE & REEL AMMO
14"
Front Back CK05 1,000 2,500 3,000
CK05
Style
100V Voltage Rating
CK06 1,000 2,500 3,000
Temperature Characteristic
BX AAAY A for AVX; Plant ID (X); Lot Code (XX)
Capacitance Value
103K 9907 Date Code
(3 digit code) and Capacitance Tolerance

Capacitance Range, pF
Mil Type TC Min. Max. Tolerance WVDC
CK05 BX 10 1,000 10%, 20% 200
BX 1,200 10,000 10%, 20% 100
BX 12,000 100,000 10%, 20% 50
CK06 BX 1,200 10,000 10%, 20% 200
BX 12,000 100,000 10%, 20% 100
BX 120,000 1,000,000 10%, 20% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #042. Visit our website http://www.avxcorp.com

42
MIL-PRF-11015/Axial Leads
CK12/13/14/15/16
L
1.25 D HOW TO ORDER
MIN.
L.D. CK12 BX 103 K
1 2 3 4
1 Style:
CK = General purpose, ceramic dielectric,
fixed capacitors.
12 = Remaining two numbers identify shape
and dimension.
Dimensions: millimeters (inches) 2 Voltage-Temperature Limits:
Per Mil Case Size
First letter identifies temperature range.
Spec B = -55°C to +125°C
MIL-PRF-11015 Length Diameter Lead Diameter Second letter identifies voltage-temperature
(L) (D) (L.D.) coefficient.
4.07±.25 2.29±.25 .48±.05 Capacitance Change with Reference to 25°C
CK12 (0.160±0.010) (0.090±0.010) (0.019±0.002)
6.35±.25 2.29±.25 .48±.05 Second No Voltage Rated Voltage
CK13 (0.250±0.010) (0.090±0.010) (0.019±0.002) Letter
9.91±.25 3.56±.25 .63±.05 R +15,-15% +15,-40%
CK14 (0.390±0.010) (0.140±0.010) (0.025±0.002)
X +15,-15% +15,-25%
12.7±.51 6.35±.38 .63±.05
CK15 (0.500±0.020) (0.250±0.015) (0.025±0.002)
17.53±.51 8.89±.51 .63±.05 3 Capacitance Code
CK16 (0.690±0.020) (0.350±0.020) (0.025±0.002) 4 Capacitance Tolerance: K = ±10%, M = ±20%
Marking Standard Packaging
BULK TAPE & REEL AMMO
CK12/CK13 Style 14"
CK12 Temperature Characteristic
BX Capacitance Value CK12 100 5,000 4,000
103K (3 digit code) and Cap. Tolerance
9907 CK13 100 5,000 4,000
AVX Date Code
Mfg. I.D. Code CK14 100 3,000 2,000
CK14, CK15, CK16 CK15 50 950 N/A
Style and Temp. Characteristic
CK14BR
104K Capacitance Value and Cap. Tolerance CK16 50 650 N/A
9907 Date Code
AVX Mfg. I.D. Code

Capacitance Range, pF
Mil Type TC Min. Max. Tolerance WVDC
CK12 BX 10 4,700 ±10%, ±20% 100
BX 5,600 10,000 ±10%, ±20% 50
CK13 BX 5,600 10,000 ±10%, ±20% 100
BX 12,000 22,000 ±10%, ±20% 50
BR 27,000 47,000 ±10%, ±20% 50
CK14 BX 12,000 47,000 ±10%, ±20% 100
BR 56,000 100,000 ±10%, ±20% 100
BR 120,000 270,000 ±10%, ±20% 50
CK15 BX — 100,000 ±10%, ±20% 100
BR 120,000 330,000 ±10%, ±20% 100
BR 470,000 1,000,000 ±10%, ±20% 50
CK16 BR 470,000 1,000,000 ±10%, ±20% 100
BR 2,200,000 3,300,000 ±10%, ±20% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #043. Visit our website http://www.avxcorp.com

43
MIL-PRF-20/Radial Leads
CCR05/06/07/08/09 HOW TO ORDER
Figure 1 Figure 2
L.D. W T W
L.D.
CCR06 CG 183 J R V
1 2 3 45 6
L.S. L L L.S. 1 Style:
CC = Identifies temperature compensating, ceramic
T L T dielectric, fixed capacitors.
L
R = Identifies Established Reliability parts.
06 = Numbers identify shape and dimension.
W
W
2 Temperature Characteristic:
1.250 Min. L.D. 1.250 Min. L.D. Permissible capacitance change from capacitance at
+25°C in ppm/°C
L.S.
L.S.
Temp. Characteristic
Figure 3 Figure 4 CX CK CJ CH CG
Dimensions: millimeters (inches) +125°C 1/ ±250 ppm/°C ±120 ppm/°C ±60 ppm/°C ±30 ppm/°C
+246.25 +116.25 +55.00 +27.50
Per MIL -55°C 2/ 1/
Case Size -326.25 -166.25 -91.25 -53.75
Spec
1/ Not practically measurable.
Lead Lead
MIL-PRF-20 Length Width Thickness Spacing Diameter 2/ The ppm/°C values for -55°C were calculated by dividing ppm by
(L) (W) (T) (L.S.) (L.D.) negative 80°C.

CCR05/CC05 4.83±.25 4.83±.25 2.29±.25 5.08±.38 .64±.05 3 Capacitance Code

(Fig. 1,4) (0.190±0.010)(0.190±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002) 4 Capacitance Tolerance:
CCR06/CC06 7.37±.25 7.37±.25 2.29±.25 5.08±.38 .64±.05 C = ±0.25 pF, D = ±0.5 pF, F =±1%,
(Fig. 2,3) (0.290±0.010)(0.290±0.010) (0.090±0.010) (0.200±0.015) (0.025±0.002) G = ±2%, J = ±5%, K =±10%
CCR07/CC07 12.19±.51
(Fig. 2)
12.19±.51 3.56±.25 10.16±.51 .64±.05
(0.480±0.020)(0.480±0.020) (0.140±0.010) (0.400±0.020) (0.025±0.002) 5 Military Failure Rate:
M = 1% per 1000 hours, P = 0.1% per 1000 hours,
CCR08/CC08 12.19±.51 12.19±.51 6.1±.25 10.16±.51 .64±.05
(Fig. 2) (0.480±0.020)(0.480±0.020) (0.240±0.010) (0.400±0.020) (0.025±0.002) R = 0.01% per 1000 hours, S = 0.001% per
1000 hours.
CCR09/CC09 4.83±.25 4.83±.25 2.29±.25 2.54±.38 .64±.05
(Fig. 2) (0.190±0.010)(0.190±0.010) (0.090±0.010) (0.100±0.015) (0.025±0.002) 6 To Order Stand-Off Option: place “V” at the end of
the part number. For example: CR05CG332FSV.
Radials
CC05 & CC09 CC06 CC07 CC08
CC05 9907 Date Code CC06 9907A Date Code & Lot Letter CG Characteristic CC08CG
CH A0 A=Lot Letter CG 200V 200V=Rated Voltage 103 Capacitance Value 392K Trademark or Manufacturer’s Name
100G 4222 0=1st Digit of AVX FSCM # 102F 04222 G9 AVX Source Code (FSCM)
04222=AVX FSCM # Cap. Tolerance & Year Code (9 for 1999) 96095 Voltage, Date Code and Lot Symbol
4222=Last four digits of AAVX Lot Code & Trademark 200V 9907A
FRONT BACK AVX FSCM # FRONT BACK
CCR06
CCR05 & CCR09 Date Code CCR06 9907A Date Code & Lot Letter CCR07 CCR08
CG102 J200V J=”J” or “JAN” Brand “J” Brand (J) and Characteristic (CG)
CCR0 9907 A=Lot Letter 200V=Rated Voltage JCG CCR08CG “JAN” Brand & Trademark or
5CH1 AJ0 J=”J” or “JAN” Brand FM 04222 103 Capacitance Value 392KM
0=1st Digit of AVX FSCM # 04222=AVX FSCM # Cap. Tolerance (G) FR Level (M), JAN AVX Manufacturer’s Name
00GM 4222 FRONT BACK GM9 96095 Source Code (FSCM)
4222=Last four digits of AAVX & Year Code (9 for 1999)
FRONT BACK 200V 9907A Voltage, Date Code and Lot Symbol
AVX FSCM # Lot Code (A); and Trademark (AVX)

Standard Packaging
BULK TAPE & REEL AMMO BULK TAPE & REEL AMMO
14" 14"
CCR05 100 2,500 2,500 CCR07 100 N/A N/A
CCR06 100 2,500 2,500 CCR08 100 N/A N/A
CCR09 100 N/A N/A
Capacitance Range, pF
Mil Type TC Min. Max. Tolerance WVDC
CCR05 CX 1.0 2.0 ±0.25pF 200
CK 2.2 3.9 ±0.25pF, ±0.5pF 200
CJ 4.3 7.5 ±0.25pF, ±0.5pF 200
CH 8.2 18 ±2%, ±5% 200
CG 20 330 ±1%, ±2%, ±5% 200
CG 360 1,800 ±1%, ±2%, ±5% 100
CG 2,000 3,300 ±1%, ±2%, ±5% 50
CCR06 CG 360 1,800 ±1%, ±2%, ±5% 200
CG 2,000 4,700 ±1%, ±2%, ±5% 100
CG 5,100 18,000 ±1%, ±2%, ±5% 50
CCR07 CG 2,200 4,700 ±1%, ±2%, ±5%, ±10% 200
CG 5,600 12,000 ±1%, ±2%, ±5%, ±10% 100
CG 15,000 100,000 ±1%, ±2%, ±5%, ±10% 50
CCR08 CG 3,900 4,700 ±2%, ±5%, ±10% 200
CG 15,000 18,000 ±2%, ±5%, ±10% 100
CG 56,000 68,000 ±2%, ±5%, ±10% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #044. Visit our website
http://www.avxcorp.com

44
MIL-PRF-20/Axial Leads
CCR75/76/77/78/79
1.25 D
HOW TO ORDER
L MIN.
L.D. CCR76 CG 102 J R
1 2 3 45
1 Style:
CC = Identifies temperature compensating,
ceramic dielectric, fixed capacitors.
R = Identifies Established Reliability parts.
Dimensions: millimeters (inches) 76 = Numbers identify shape and dimension.
Per MIL 2 Temperature Characteristic:
Case Size
Spec Permissible capacitance change from capacitance at
Length Diameter Lead Diameter +25°C in ppm/°C
MIL-PRF-20
(L) (D) (L.D.) Temp. Characteristic
CCR75 4.07±.25 2.29±.25 .48±.05 CX CK CJ CH CG
CC75 (0.160±0.010) (0.090±0.010) (0.019±0.002) +125°C 1/ ±250 ppm/°C ±120 ppm/°C ±60 ppm/°C ±30 ppm/°C
CCR76 6.35±.25 2.29±.25 .48±.05 +246.25 +116.25 +55.00 +27.50
-55°C 2/ 1/
CC76 (0.250±0.010) (0.090±0.010) (0.019±0.002) -326.25 -166.25 -91.25 -53.75
CCR77 9.91±.25 3.56±.25 .63±.05 1/ Not practically measurable.
CC77 (0.390±0.010) (0.140±0.010) (0.025±0.002)
CCR78 12.7±.51 6.35±.38 .63±.05
3 Capacitance Code
CC78 (0.500±0.020) (0.250±0.015) (0.025±0.002) 4 Capacitance Tolerance:
CCR79 17.53±.51 8.89±.51 .63±.05 C = ±0.25 pF, D = ±0.5 pF, F = ±1%,
CC79 (0.690±0.020) (0.350±0.020) (0.025±0.002) G = ±2%, J = ±5%, K = ±10%
5 Military Failure Rate:
Marking M = 1% per 1000 hours, P = 0.1% per 1000 hours,
CC75, CC76 R = 0.01% per 1000 hours, S = 0.001%
CG
Characteristic
Capacitance Value
per 1000 hours.
101 Cap. Tolerance & 2 digit Year Code
G99 2 digit Week, 2 digit Lot Code, CCR77
07AAA A for AVX
CCR77C Type Designation
CCR75, CCR76 G151FM
J04222 “J” Brand and FSCM
Standard Packaging
“J” Brand (J) and Characteristic (CG) 9907AA
JCG
Capacitance Value
4 digit Date Code, 2 digit Lot Code BULK TAPE & AMMO
101
GM99 Cap. Tolerance (G) FR Level (M), REEL
2 digit Year Code CC78, CC79 CCR78, CCR79
07AAA
2 digit Week, A for AVX Type Designation
14"
Type Designation CCR78 TC
CC77 CC78CG
CG Capacitance Tolerance,
CCR75 100 5,000 4,000
821K Trademark or 821KM
CC77C Type Designation AVX Failure Rate CCR76 100 5,000 4,000
Manufacturer’s Name JAN A “JAN” Brand, A for AVX
G151F 04222 Source Code (FSCM) 04222
04222 FSCM 200V 200V FSCM CCR77 100 3,000 2,000
4 digit Date Code, 2 digit Lot Voltage Voltage
9907AA 9907AA 4 Digit Date Code 9907AA
Code 4 digit Date Code, CCR78 50 950 N/A
2 digit Lot Code
CCR79 50 650 N/A

Capacitance Range, pF
Mil Type TC Min. Max. Tolerance WVDC
CCR75 CX 1.0 2.0 ±0.25pF 200
CK 2.2 3.9 ±0.25pF, ±0.5pF 200
CJ 4.3 7.5 ±0.25pF, ±0.5pF 200
CH 8.2 18.0 ±0.25pF, ±0.5pF 200
CG 20 75 ±1%, ±2%, ±5% 200
CG 82 240 ±1%, ±2%, ±5% 100
CG 270 680 ±1%, ±2%, ±5% 50
CCR76 CG 82 130 ±1%, ±2%, ±5% 200
CG 270 680 ±1%, ±2%, ±5% 100
CG 750 1,000 ±1%, ±2%, ±5% 50
CCR77 CG 150 680 ±1%, ±2%, ±5% 200
CG 750 2,200 ±1%, ±2%, ±5% 100
CG 2,400 5,600 ±1%, ±2%, ±5% 50
CCR78 CG 820 3,300 ±1%, ±2%, ±5%, ±10% 200
CG 3,900 12,000 ±1%, ±2%, ±5%, ±10% 100
CG 15,000 27,000 ±1%, ±2%, ±5%, ±10% 50
CCR79 CG 3,900 10,000 ±1%, ±2%, ±5%, ±10% 200
CG 15,000 39,000 ±1%, ±2%, ±5%, ±10% 100
CG 47,000 82,000 ±1%, ±2%, ±5%, ±10% 50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #045. Visit our website http://www.avxcorp.com

45
MIL-PRF-123
CKS Series
MIL-Spec Test Requirements HOW TO ORDER
Test Description MIL-PRF-123 M123 A 01 BX B 103 K C
NDT 100% Ultrasonic Scan or
(Non-Destructive Test) Neutron-Radiography 1 2 3 4 5 6 7 8
Pre-Cap Visual
(Pre-Encapsulation 100%
1 Mil-Spec Number
Visual Examination) 2 Modification Spec.
D.P.A.
(Destructive Physical Analysis)
Lot by Lot—Pre-Termination
Lot by Lot—Finished Product 3 Slash Sheet Number
Pre-Cap 4 Voltage-Temperature Limits:
Terminal Strength Lot by Lot
(Pre-Encapsulation Pull Test) Capacitance Change with reference to 25°C
Life Test / (Lot by Lot) Lot by Lot—1000 Hours over temperature range -55°C to +125°C
Low Voltage / Humidity Lot by Lot
Thermal Shock / 100 Cycles Lot by Lot
Symbol Without Voltage With Rated DC Voltage
BP 0±30 ppm/°C 0±30 ppm/°C
MIL-PRF-123/Style CKS05,-/01 BX +15, -15 percent +15, -25 percent
1.14 MAX.

4.83 +- 0.254
(.190 +- 0.010)
(.045)
SEE NOTE 4 2.29 +- 0.254
(.090 +- 0.010)
Cap Range
BP-TCVC
RVDC
5 Rated Voltage: 7 Capacitance Tolerance:
4.83 +- 0.254 4.7-240pF 100 Rated Voltage Cap. Tolerance
CL (.190 +- 0.010) Symbol Symbol
270-2,700pF 50 Volts, DC ±
31.75
MIN. BX-TCVC B 50 C 0.25pF
54 +- .381 (1.25) CL OF LEADS
100 +- .015) .635 +- .051 WITHIN .381 (.015)
Cap Range RVDC C 100 D 0.5pF
(.025 +-.002) CL OF CASE
270-4,700pF 100 F 1%
5.08 +- .381 5,600-10,000pF 50 6 Capacitance Code J 5%
(.200 +- .015)
K 10%
MIL-PRF-123/Style CKS06,-/02
8 Termination:
7.37 +- 0.254
(.290 +- 0.010)
2.29 +- 0.254
(.090 +- 0.010) BP-TCVC Lead Capacitors
Cap Range RVDC Symbol
7.37 CL OF LEADS 270-2,400pF 100 Termination Style
(.290) WITHIN .762 (.030)
CL OF CASE 2,700-4,700pF 50 C Copper, solder coated
BX-TCVC (type C-4 or C-5 of MIL-STD-1276
31.75
(1.25)
MIN.
Cap Range RVDC
.635 +-.051 5,600-100,000pF 100
(.025 +- .002)
5.08 +- .381 56,000-470,000pF 50
(.200 +- .015)

MIL-PRF-123/Style CKS11,-/04 MIL-PRF-123/Style CKS12,-/05 MIL-PRF-123/Style CKS14,-/06

4.06 6.35
(.160) .508 +- .051 (.250) 390
.508 +- .051 .020
(.020 +-.002) (.020 +-.002) +-.002

31.75
MIN. 2.29 31.75 1.250 MIN.
(1.25) MIN. 140
(.090) (1.25) 2.29
(.090)

BP-TCVC BX-TCVC BP-TCVC BX-TCVC BP-TCVC BX-TCVC

Cap Range RVDC Cap Range RVDC Cap Range RVDC Cap Range RVDC Cap Range RVDC Cap Range RVDC
47-100pF 100 100-1,000pF 100 110-220pF 100 1,200-4,700pF 100 240-1,000pF 100 5,600-10,000pF 100
110-560pF 50 1,200-4,700pF 50 240-470pF 50 5,600-10,000pF 50 1,100-6,800pF 50 12,000-47,000pF 50

MIL-PRF-123/Style CKS15,-/07 MIL-PRF-123/Style CKS16,-/08

500
.025 690
.025
+.002
- +.002
-

1.250 MIN. 1.250 MIN.

250 350

BP-TCVC BX-TCVC BP-TCVC BX-TCVC

Cap Range RVDC Cap Range RVDC Cap Range RVDC Cap Range RVDC
1,100-2,200pF 100 12,000-100,000pF 100 2,400-10,000pF 100 120,000-470,000pF 100
2,400-22,000pF 50 120,000-180,000pF 50 11,000-22,000pF 50 560,000-1,000,000pF 50

MIL-PRF-123/Style CKS22,-/16 MIL-PRF-123/Style CKS23,-/17 MIL-PRF-123/Style CKS24,-/18

.260 .092 .260 .092 .260 .092
+ + SEE +
- .020 +
- .006 SEE +
- .020 +
- .006 SEE
- .020 - .006
NOTE 2 NOTE 3 NOTE 2

.128 .175 .155 .195 .283 .320

+ +
-.007 +
-.007
-.007 MAX. MAX. MAX.

.015 (SEE NOTE 4) .015 (SEE NOTE 3) .015

(SEE NOTE 3) .148 MIN. .148 MIN. .148
MIN.
+ .012 +
- .028 +
- .028
.012 - .028 .012
+ +
-.004 +
-.004
-.004
.325 +
- .035 .325 +
- .035 .325 +
- .035
.058 .058 .058
(SEE NOTE 4) (SEE NOTE 5) + (SEE NOTE 4) +
+
- .012 - .012 - .012

.090 .090 .090

+ +
- .004 +
- .004
- .004
60o +
- 20
o 60o +
- 20
o
60o +
- 20
o

TYP TYP .010 TYP .010

.010
MAX MAX MAX
.019 .019 .019
BP-TCVC + 004
BX-TCVC BP-TCVC +
-.004 BX-TCVC +
-.004

Cap Range RVDC Cap Range RVDC Cap Range RVDC Cap Range RVDC BX-TCVC
1.0-470pF 200 270-820pF 200 560-1,200pF 200 1,000-10,000pF 200 Cap Range RVDC
560-2,200pF 100 1,000-10,000pF 100 2,700-3,300pF 100 12,000-100,000pF 100 120,000-150,000pF 100
2,700-4,700pF 50 12,000-100,000pF 50 4,700-10,000pF 50 120,000-220,000pF 50 180,000-470,000pF 50
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #046.
Visit our website http://www.avxcorp.com

46
European Detail Specifications
CECC 30-601 & 30-701
SkyCap, SpinGuards and Ceralam capacitors are
available to European CECC specifications covering
three standard dielectric materials: 1B/C0G, 2C1/X7R
and 2F4/Y5V.
To order use AVX part number with the Failure Rate
code of “T” for CECC.

SpinGuard – CECC
1B/A 2C1/C 2F4/E
BSCECC 30 601 010 Issue 1 BSCECC 30 701 014 Issue 1 BSCECC 30 701 015 Issue 1
50V 100V 200V 50V 100V 200V 50V 100V
A/SA10 1R0-102 1R0-102 1R0-681 221-393 221-273 221-682 102-224 102-154
B/SA20 1R0-222 1R0-222 1R0-152 271-823 271-563 271-153 472-474 472-334
C/SA30 3R3-562 3R3-472 3R3-392 561-184 561-154 561-333 103-105 103-824

Molded Radial – CECC

1B/A 2C1/C 2F4/E
CECC 30 601 009 Issue 1 CECC 30 701 007 Issue 1 CECC 30 701 008 Issue 1
50V 100V 200V 50V 100V 200V 50V 100V
B/MR05 1R0-682 1R0-472 1R0-332 221-224 221-154 221-393 103-125 103-224
C/MR06 1R0-223 1R0-153 1R0-123 122-105 122-474 122-124 223-335 223-684

SkyCap – CECC SR15 = D2 SR20 = D6 SR21 = D7 SR30 = D11 SR40 = D15 SR50 = D14 SR65 = D16
1B/A 2C1/C 2F4/E
CECC 30 601 801 Issue 2 CECC 30 701 801 Issue 2 CECC 30 701 802 Issue 1
50V 100V 200V 500V 50V 100V 200V 500V 50V 100V
SR15 1R0-122 1R0-681 1R0-471 — 221-333 221-273 221-562 — 103-154 103-393
SR20 1R0-682 1R0-392 1R0-392 1R0-152 102-184 102-124 102-333 102-103 103-824 103-224
SR21 1R0-682 1R0-392 1R0-392 1R0-152 102-184 102-124 102-333 102-153 103-824 103-224
SR30 102-273 102-223 102-223 101-472 333-105 333-334 333-124 103-473 104-225 104-684
SR40 103-563 103-393 103-393 — 334-155 334-105 124-274 — 105-156 105-335
SR50 103-104 103-823 103-563 — 104-155 104-185 104-564 — 225-276 225-685
SR65 102-273 102-223 102-103 101-472 333-105 333-334 333-124 103-473 104-225 104-684

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #047. Visit our website http://www.avxcorp.com

47
Disc Ceramic Capacitors
Ordering Code
HOW TO ORDER
5O Q 222 M A E A A
1~2 3 4 5 6 7 8 9
1 General Purpose *Upon Request 7 Capacitor Diameter ± 2 (0.079) millimeters (inches)
5A = NP0 / I *5I = N2200 / I 5S = Y5U / II A = 4 (0.157) E = 8 (0.315) J = 13 (0.512)
*5B = P100 / I *5J = N4700 / I 5T = Y5V / II B = 5 (0.197) F = 9 (0.354) K = 15 (0.591)
*5C = N150 / I 5K = SL 5U = Z5V / II C = 6 (0.236) G = 10 (0.394) M* = 19 (0.748)
*5D = N220 / I 5M = Y5E / II *5V = Z4V / III
*5E = N330 / I 5N = Y5F / II 5W = Y5P / III D = 7 (0.276) H = 11 (0.433)
*5F = N470 / I 5O = Y5P / II 5Y = Y5U / III *Wire 0.8 (0.031) recommended
5G = N750 / I *5P = Y5R / II 5Z = Y5V / III 8 Finishing Diam ≤9 (0.354) and For every other:
5H = N1500 / I *5Q = Y5T / II F = 5.00 (0.197)
2 Professional Switch Mode Safety *Upon Request
6A = NP0 / I 61 = SAFETY *6Q = X5T / II
*6B = P100 / I 62 = SAFETY 6S = X5U / II
*6C = N150 / I 65 = SAFETY 6T = X5V / II
Coating does not
*6D = N220 / I 67 = Y5U / SM 6U = Z5V / II surpass the bend
*6E = N330 / I 68 = Y5V / SM *6V = Z4V / III
*6F = N470 / I 6L = Y5P / SM 6W = Y5P / III Low Voltage
6G
*6H
=
=
N750 / I
N1500 / I
6M
6N
=
=
X5E / II
X5F / II
6Y
6Z
=
=
Y5U / III
Y5V / III
A = Phenolic ( Purpose
General
) Q = Waxed phenolic
*6I = N2200 / I 6O = X5P / II S = Epoxy (Professional) cap. diameter ≤ 8 (0.315)
6J = N4700 / I *6P = X5R / II D = Epoxy (Professional) cap. diameter > 8 (0.315)
3 Rated Voltage (dc) *Upon Request High Voltage
D = 16V N = SAFETY S = 2000V W = 5000V F = Measured
F = 25V O = SAFETY T = 3000V *X = 6000V from the
H = 50V Q = 500V U = 4000V *Y = 7500V center of
K = 100V R = 1000V V = SAFETY leads
4 Capacitance 222 = 2.2 nF
Capacitance = TPC code *Upon Request C = Epoxy wire diameter 0.6 (0.024) ± 0.1 (0.004)
I = Epoxy wire diameter 0.8 (0.031) ± 0.1 (0.004)
1 pF = 1R0 18pF = 180 270pF = 271 3.9nF = 392
1.2pF = 1R2 22pF = 220 330pF = 331 4.7nF = 472 L = Phenolic wire diameter 0.6 (0.024) ± 0.1 (0.004)
1.5pF = 1R5 27pF = 270 390pF = 391 5.6nF = 562
1.8pF = 1R8 33pF = 330 470pF = 471 6.8nF = 682
2.2pF = 2R2 39pF = 390 560pF = 561 8.2nF = 822 9 Packaging
2.7pF = 2R7 47pF = 470 680pF = 681 10nF = 103 Cardboard Strips
3.9pF = 3R9 56pF = 560 820pF = 821 15nF = 153
4.7pF = 4R7 68pF = 680 1nF = 102 22nF = 223
5.6pF = 5R6 82pF = 820 1.2nF = 122 33nF = 333 A=
6.8pF = 6R8 100pF = 101 1.8nF = 182 47nF = 473 Bulk
8.2pF = 8R2 120pF = 121 2.2nF = 222 100nF = 104 E = 5 (0.197) ± 1 (0.039) free wire length
10pF = 100 150pF = 151 2.7nF = 272 200nF = 204
C = 10 (0.394) ± 1 (0.039) free wire length
12pF = 120 180pF = 181 3.3nF = 332
15pF = 150 220pF = 221 D = 25 (0.984) ± 1 (0.039) free wire length

5 Tolerance Taping
C = ±0.25 pF K = ±10% Z = -20+80% Reel Avisert Panasert
D = ±0.50 pF M = ±20% P = 0+100%
J = ±5% S = -20+50%
6 Lead H L L J L L
Forming millimeters (inches)
Ammo Avisert Panasert
2.5 ±0.5 (0.100 ± 0.025) D – – Pack
5 +0.6 (0.200 ± 0.025) A O N
-0.2
I M M K M M
6 +0.6
-0.2 (0.250 ± 0.025) E X –
+1
7.5 -0.5 (0.300 ± 0.050) B R Q

10 +0.5 (0.400 ± 0.050) C W –

-1.0
+1
12.5 -0.5 (0.500 ± 0.050) P – – Please note that not all code combinations are either possible or available.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #048. Visit our website http://www.avxcorp.com

48
Disc Ceramic Capacitors
Temperature Compensating - Class I
Performance Characteristics
100 V → 500 V 1kV → 5kV
Measured at 1.0 MHz @ 1.0 Vrms & 25ºC 1.0 MHz @ 1.0 Vrms & 25ºC
Dissipation Factor CR ≤ 30 pF → ≤1/CR + 0.07 CR ≤ 30 pF → ≤1/CR + 0.07
(%) CR > 30 pF → ≤ 0.1% CR > 30 pF → ≤ 0.1%
CR < 10 pF → ±0.25 pF, ±0.5 pF CR < 10 pF → ±0.25 pF, ±0.5 pF
Ø= 0.6 ± 0.1 Tolerance CR ≥ 10 pF → ±5%, ±10% CR ≥ 10 pF → ±5%, ±10%
(0.024) (0.004) Insulation
Resistance (IR) @ VR ≥ 10 GΩ @ 500V ≥ 10 GΩ
Dielectric Strength
NOTE: Charging @ VR = 100V → Vt = 250V (DC)
1.5 x VR + 500 (DC)
Preferred lead spacing current limited @ VR = 500V → Vt = 1.25kV (DC)
to 50 mA
F = 5 (0.197)
Operating
-30 → +85 Phenolic Coated
Temperature -30 → +85
-30 → +125 Epoxy Coated
Range (ºC)
Climatic 30 / 085 / 21 Phenolic Coated 30 / 085 / 21 Phenolic Coated
Category 30 / 085 / 56 Epoxy Coated
Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied.

Dielectric - Class I For Ordering Code See Page 48

Cap. Disc. Dia. Available Capacitance Range, pF
Dia. mm (in.)
Code D ± 2 T max. NP0 N750 N1500
(7) (±0.079) 100VDC 500VDC 1000VDC 2000VDC 3000VDC 4000/5000VDC 100VDC 500VDC 1000VDC 2000VDC 3000VDC 4000VDC 5000VDC 100VDC 500VDC
4.0 3.0
A (0.157) (0.118) 1.0-15 1.0-15 3.9-5.6 3.9-4.7 – – 1.5-33 1.5-33 – – – – – 6.0-47 6.0-47
5.0 4.0
B (0.197) (0.157) 18-39 18-27 6.0-15 5.0-12 – – 39-68 39-56 6.8-27 6.8-22 – – – 50-120 50-56
6.0 4.0
C (0.236) (0.157) – 33 18 15-18 5.6 -7.0 4.7-7.0 82 68 33 27-33 6.8-20 – – – 68-100
7.0 4.0
D (0.276) (0.157) 47-50 39-50 20-39 20-33 8.0-15 – 100-150 82-100 39-50 39-50 22-33 – – 150-220 120
8.0 4.0
E (0.315) (0.157) 56-82 56-68 47-50 39 18-27 8.0-15 180 120 56-68 56-68 39-56 15-27 – 270 150-180
9.0 5.0
F (0.354) (0.197) 100-120 82 56-68 47-56 33-39 – 220 150 82-100 82 68 – – 330 220
10.0 5.0
G (0.394) (0.197) – – – – – 18-27 – – – – – – – – –
11.0 5.0
H (0.433) (0.197) 150-180 100-150 82-100 68-82 47-56 33-39 270 180-220 120-150 100-120 82 33-56 15-50 – 270-330
13.0 6.0
J (0.512) (0.236) – – 120 100 68-82 47-50 – 270 180-220 150 100-120 – – – –
15.0 6.0
K (0.591) (0.236) – 180-220 150 120-150 100-120 56 – 330 – 180-270 150-220 68-82 56-68 – –
19.0 7.0
M – 270-330 180 – – 68-100 – – – – – 100-120 82-100 – –
(0.748) (0.276)

Class SL: For Ordering Code See Page 48

Cap. Disc. Dia. Available Capacitance Range, pF
Dia. mm (in.)
Code D ± 2 T max.
(7) (±0.079) 50V 100V
4.0 3.0
A (0.157) (0.118) 1.0-220 1.0-220
5.0 4.0
B (0.197) (0.157) 270-470 –
6.0 4.0
C (0.236) (0.157) 560 270-470
7.0 4.0
D (0.276) (0.157) 680-1000 560-680
8.0 4.0
E (0.315) (0.157) – 820-1,000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #049. Visit our website http://www.avxcorp.com

49
Disc Ceramic Capacitors
General Purpose - Class II

Performance Characteristics
Voltage Rating 100V and 500V
Measured at 1.0 kHz / 3.0 Vef / 25ºC
Dissipation Factor Y5E / Y5F / Y5P ≤ 2.5%
Y5U / Y5V / Z5V ≤ 3.0%
Capacitance Y5E / Y5F / Y5P → ±10%
Ø= 0.6 ± 0.1 Tolerance Y5E / Y5E / Y5P / Y5U → ±20%
(0.024) (0.004) Y5U / Y5V / Z5V → -20% +50%
Insulation @ VR → ≥ 10 GΩ
Resistance
Dielectric Strength
NOTE: Charging VR = 100V → Vt = 250V (DC)
current limited VR = 500V → Vt = 1250V (DC)
Preferred lead spacing to 50 mA
Operating
F = 5 (0.197) Temperature -30... +85
Range (ºC)
Climatic 30 / 085 / 21 Phenolic Coated
Category
Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied.

Performance Characteristics
Voltage Rating 1kV ... 5kV
Measured at 1.0 kHz / 3.0 Vef / 25ºC
Dissipation Factor Y5F → ≤ 2.5%
Y5U / Y5V ≤ 3.0%
Capacitance Y5F → ±10% / ±20%
Tolerance Y5U → ±20% / -20 +50%
Y5V → -20 +50%
Insulation @ 500V → ≥ 10 GΩ
Resistance
Dielectric Strength
NOTE: Charging 1.5 x VR + 500 (DC)
current limited
to 50 mA
Operating
-30... +85 Phenolic Coated
Temperature
-30... +125 Epoxy Coated
Range (ºC)
Climatic 30 / 085 / 21 Phenolic Coated
Category 30 / 085 / 56 Epoxy Coated

Dielectric - Class II Low and Medium Voltage For Ordering Code See Page 48
Cap. Disc. Dia.
Dia. mm (in.) Available Capacitance Range, pF
Code D ± 2 T max. Y5E Y5F Y5P Y5U Y5V Z5V
(7) (±0.079) 100V 500V 100V 500V 100V 500V 100V 500V 100V 500V 100V
4.0 3.0
A (0.157) (0.118) 56-330 56-330 390 390 470-560 470-560 680-1,000 680-1,000 1,200-2,200 1,200-2,200 4,700
5.0 4.0
B (0.197) (0.157) 390-680 390-470 470-1,000 470-560 680-1,200 680-820 1,200-2,200 1,200-1,500 2,700-3,900 2,700-3,300 10,000
6.0 4.0
C (0.236) (0.157) 820 560-680 1,200 680-820 1,500 1,000-1,200 2,700-3,300 1,800 4,700 3,900 –
7.0 4.0
D (0.276) (0.157) 1,000 820-1,000 1,500-1,800 1,000 1,800 1,500-1,800 3,900-6,800 2,200-2,700 5,600-6,800 4,700-5,600 –
8.0 4.0
E (0.315) (0.157) 1,200-1,500 1,200 2,200 1,200-1,500 2,200-2,700 2,200 – 3,300-3,900 8,200-10,000 6,800 22,000
9.0 5.0
F (0.354) (0.197) 1,800-2,200 1,500-1,800 2,700-3,300 1,800 3,300 2,700-3,300 8,200 4,700-5,600 12,000 8,200-10,000 –
11.0 5.0 10,000-
H (0.433) (0.197) 2,700-3,300 2,200 3,900-4,700 2,200-2,700 3,900-5,600 3,900-4,700 12,000 6,800-10,000 15,000 12,000 –
13.0 6.0
J (0.512) (0.236) – – – 3,300 6,800 5,600 – 12,000 22,000 15,000 –
15.0 6.0
K (0.591) (0.236) – 2,700-3,300 – 3,900-4,700 – 6,800 – – – 22,000 –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #050. Visit our website http://www.avxcorp.com

50
Disc Ceramic Capacitors
General Purpose - Class II
Dielectric - Class II High Voltage For Ordering Code See Page 48
Cap. Disc. Dia.
Dia. mm (in.) Available Capacitance Range, pF
Code D ± 2 T max. Y5F Y5U Y5V
(7) (±0.079) 1000V 2000V 3000V 1000V 2000V 3000V 4000V 5000V 1000V 2000V 3000V
4.0 3.0
A (0.157) (0.118) 100-270 100-150 100-150 330-680 – – – – 820-1,200 – –
5.0 4.0
B (0.197) (0.157) 330-470 180-270 100-150 820-1,200 330-470 – – – 1,500 – –
6.0 4.0
C (0.236) (0.157) 560 330 180 1,500 560-820 – – – 1,800 1,000-1,200 –
7.0 4.0
D (0.276) (0.157) 680-1,200 390-560 220-330 1,800-2,700 1,000-1,500 390-1,000 – – 2,200-3,900 1,500-2,200 1,200-1,500
8.0 4.0
E (0.315) (0.157) 1,500 680-820 390-560 3,300-3,900 1,800 1,200 100-820 – – 2,700 1,800
9.0 5.0
F (0.354) (0.197) 1,800 1,000-1,200 680 4,700 2,200-2,700 1,500-1,800 – – 4,700-5,600 3,300-3,900 2,200-2,700
10.0 5.0
G (0.394) (0.197) – 1,500 820-1,000 5,600 3,300-3,900 2,200 1,000 – 6,800-8,200 – –
11.0 5.0
H (0.433) (0.197) 2,200-2,700 1,800 1,200 6,800 4,700 2,700-3,300 1,200-2,200 100-1,000 – 4,700-6,800 3,300-3,900
13.0 6.0 10,000-
J (0.512) (0.236) 3,300 2,200-2,700 1,500-1,800 8,200-12,000 5,600-8,200 3,900-5,600 2,700-3,300 1,200-2,200 15,000 8,200 4,700-6,800
15.0 6.0 10,000-
K (0.591) (0.236) 3,900 3,300-3,900 2,200-2,700 15,000 10,000 6,800 3,900-4,700 2,700-3,300 22,000 15,000 8,200
19.0 7.0
M (0.748) – – 3,300-3,900 – – 8,200-10,000 5,600-6,.800 3,900-4,700 – – 10,000
(0.276)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #051. Visit our website http://www.avxcorp.com

51
Disc Ceramic Capacitors
General Purpose - Class III
Performance Characteristics
Measured at 1.0 kHz / 0.1 Vef / 25ºC
Dissipation CR ≤ 22 nF → Y5V, Y5U ≤ 7.5%
Factor CR > 22 nF → Y5V, Y5P ≤ 5.0%
Capacitance Y5P → ±20% / -20 +50%
Ø = 0.6 ± 0.1 Tolerance Y5U → ±20% / -20 +80%
Y5V → ±20% / -20 +80%
(0.024) (0.004)
Climatic
30 / 085 / 21
Category
Insulation Y5P ≥12 MΩ
Resistance Y5U 4.7 nF...100 nF → ≥ 10 MΩ
@ VR 200 nF → ≥ 1 MΩ
Y5V ≥ 100 MΩ
Dielectric Strength Between
Preferred lead spacing NOTE: Charging leads Vt = 1.25 VR
F = 5 (0.197) current limited Body VR = 25V Vt = 100V (DC)
to 50 mA insulation VR = 50V Vt = 150V (DC)
Operating
Temperature -30... +85
Range (ºC)
Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied.

Dielectric - Class III For Ordering Code See Page 48

Cap. Disc. Dia.
Dia. mm (in.)
Available Capacitance Range, pF
Code D ± 2 T max. Y5P Y5U Y5V
(7) (±0.079) 25V 50V 25V 50V 50V
4.0 3.0
A (0.157) (0.118) 4,700 4,700 4,700-10,000 4,700-10,000 4,700-47,000
5.0 4.0
B (0.197) (0.157) – – 22,000 – 50,000-68,000
6.0 4.0
C (0.236) (0.157) 10,000 10,000 33,000 22,000 –
7.0 4.0
D (0.276) (0.157) 22,000 – 47,000-68,000 33,000 100,000
8.0 4.0
E (0.315) (0.157) 33,000 22,000 100,000 47,000-50,000 200,000
9.0 5.0
F (0.354) (0.197) – 33,000 – 68,000-100,000 –
10.0 5.0
G (0.394) (0.197) 47,000-50,000 – – – –
11.0 5.0
H (0.433) (0.197) 68,000 47,000 – – –
13.0 6.0
J (0.512) (0.236) 100,000 68,000 200,000 – –
15.0 6.0
K (0.591) (0.236) – 100,000 – – –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #052. Visit our website http://www.avxcorp.com

52
Disc Ceramic Capacitors

These ceramic capacitors have linear temperature

coefficient, very low tolerances, low losses, high insula-
tion resistance and are specially suitable for tuned
circuits, timing and other precision circuits.
Meets IEC 384-8 (1988).

Safety Ceramic Capacitors For Ordering Code See Page 48

Cap. Dia. Disc. Dia. T max.
Code mm (in.) Available Capacitance Range
±2 (±0.079)
Part Type
(1st 3 digits of Part No.) 61V 62O 65N
6.0 4.0
C (0.236) (0.157) 100-150 100-220 220-470
7.0 4.0
D (0.276) (0.157) 220-470 330-680 560-1,000
8.0 4.0
E (0.315) (0.157) 560-680 820-1,000 1,200-1,500
9.0 5.0
F (0.354) (0.197) 820-1,000 1,200-1,500 2,200
10.0 5.0
G (0.394) (0.197) – 2,200 –
11.0 5.0
H (0.433) (0.197) 1,200-2,200 – 3,300
13.0 6.0
J (0.512) (0.236) 3,300 3,300-3,900 3,900-4,700
15.0 6.0
K (0.591) (0.236) 3,900 4,700 –
19.0 7.0
M 4,700 – –
(0.748) (0.276)

AC and Switch Mode Capacitors For Ordering Code See Page 48

Cap. Dia. Disc. Dia. T max. Available Capacitance Range
Code mm (in.) Y5P Y5U Y5V
±2 (±0.079) 1000V 2000V 3000V 2000V 2000V
7.0 4.0
D (0.276) (0.157) 220-470 220-270 220-270 – –
8.0 4.0
E (0.315) (0.157) 560-820 330-390 – 1,000 4,700
9.0 5.0
F (0.354) (0.197) 1,000-1,200 470-560 330-390 2,200 –
10.0 5.0
G (0.394) (0.197) – 680 470-560 3,300 –
11.0 5.0
H (0.433) (0.197) 1,500-1,800 820-1,200 680 4,700 10,000
13.0 6.0
J (0.512) (0.236) 2,200 1,500 820-1,000 – –
15.0 6.0
K (0.591) (0.236) 2,700-3,900 1,800-3,300 1,200-2,700 – –
19.0 7.0
M – 3,900-4,700 3,300-4,700 – –
(0.748) (0.276)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #053. Visit our website http://www.avxcorp.com

53
Disc Ceramic Capacitors
Professional Ceramic Capacitors - Class I, II and III
Class I Professional For Ordering Code See Page 48
Cap. Disc. Dia.
Dia. mm (in.)
Available Capacitance Range, pF
Code D ± 2 T max. NP0 N750 N1500
(±0.079) 100V 500V 100V 500V 100V 500V
4.0 3.0
A (0.157) (0.118) 1.0-15 1.0-15 1.0-33 1.0-33 6.0-47 6.0-47
5.0 4.0
B (0.197) (0.157) 18-39 18-27 39-68 39-56 50-120 50-56
6.0 4.0
C (0.236) (0.157) – 33 82 68 – 68-100
7.0 4.0
D (0.276) (0.157) 47-50 39-50 100-150 82-100 150-220 120
8.0 4.0
E (0.315) (0.157) 56-82 56-68 180 120 270 150-180
9.0 5.0
F (0.354) (0.197) 100-120 82 220 150 330 220
10.0 5.0
G (0.394) (0.197) – – – – – –
11.0 5.0
H (0.433) (0.197) 150-180 100-150 270 180-220 – 270-330
13.0 6.0
J (0.512) (0.236) – – – 270 – –
15.0 6.0
K (0.591) (0.236) – 180-220 – 330 – –
19.0 7.0
M (0.748) – 270-330 – – – –
(0.276)

Class II Professional Low and Medium Voltage For Ordering Code See Page 48
Cap. Disc. Dia.
Dia. mm (in.) Available Capacitance Range
Code D ± 2 T max. X5E X5F X5P X5U X5V Z5V
(±0.079) 100V 500V 100V 500V 100V 500V 100V 500V 100V 500V 100V
4.0 3.0
A (0.157) (0.118) 56-330 56-330 390 390 470-560 470-560 680-1,000 680-1,000 1,200-2,200 1,200-2,200 4,700
5.0 4.0
B (0.197) (0.157) 390-680 390-470 470-1,000 470-560 680-1,200 680-820 1,200-2,200 1,200-1,500 2,700-3,900 2,700-3,300 10,000
6.0 4.0
C (0.236) (0.157) 820 560-680 1,200 680-820 1,500 1,000-1,200 2,700-3,300 1,800 4,700 3,900 –
7.0 4.0
D (0.276) (0.157) 1,000 820-1,000 1,500-1,800 1,000 1,800 1,500-1,800 3,900-6,800 2,200-2,700 5,600-6,800 4,700-5,600 –
8.0 4.0
E (0.315) (0.157) 1,200-1,500 1,200 2,200 1,200-1,500 2,200-2,700 2,200 – 3,300-3,900 8,200-10,000 6,800 22,000
9.0 5.0
F (0.354) (0.197) 1,800-2,200 1,500-1,800 2,700-3,300 1,800 3,300 2,700-3,300 8,200 4,700-5,600 12,000 8,200-10,000 –
11.0 5.0
H (0.433) (0.197) 2,700-3,300 2,200 3,900-4,700 2,200-2,700 3,900-5,600 3,900-4,700 – 6,800-10,000 15,000 12,000 –
13.0 6.0
J (0.512) (0.236) – – – 3,300 6,800 5,600 10,000-12,000 12,000 22,000 15,000 –
15.0 6.0
K (0.591) (0.236) – 2,700-3,300 – 3,900-4,700 – 6,800 – – – 22,000 –

Dielectric - Class III For Ordering Code See Page 48

Cap. Disc. Dia.
Dia. mm (in.) Available Capacitance Range
Code D ± 2 T max. Y5P Y5U Y5V
(±0.079) 25V 50V 25V 50V 50V
4.0 3.0
A (0.157) (0.118) 4,700 4,700 4,700-10,000 4,700-10,000 4,700-47,000
5.0 4.0
B (0.197) (0.157) – – 22,000 – 50,000-68,000
6.0 4.0
C (0.236) (0.157) 10,000 10,000 33,000 22,000 –
7.0 4.0
D (0.276) (0.157) 22,000 – 47,000-68,000 33,000 100,000
8.0 4.0
E (0.315) (0.157) 33,000 22,000 – 47,000-68,000 –
9.0 5.0
F (0.354) (0.197) – 33,000 – – –
10.0 5.0
G (0.394) (0.197) 47,000,-50,000 – – – –
11.0 5.0
H (0.433) (0.197) 68,000 47,000 – – –
13.0 6.0
J (0.512) (0.236) 100,000 68,.000 200,000 –` –
15.0 6.0
K (0.591) (0.236) – 100,000 – – –
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #054.
Visit our website http://www.avxcorp.com

54
High Voltage Chips
For 500V to 5000V Applications
HOW TO ORDER
1808 A A 271 K A 1 1 A
l
1 2 3 4 5 6 7 8 9
1 AVX Style: 1206, 1210, 1808, 1812, 1825,
2220, 2225, 3640
T W 2 Voltage: 500V=7, 600V=C, 1000V=A, 1500V=S,
2000V=G, 2500V=W, 3000V=H, 4000V=J, 5000V=K
L
3 Temperature Coefficient: C0G=A, X7R=C
4 Capacitance Code
5 Capacitance Tolerance:
C0G: J = ±5% X7R: K = ±10%
Standard Packaging K = ±10% M = ±20%
BULK TAPE & REEL M = ±20% Z = +80%
7" 13"
-20%
1206 5,000 4,000 10,000
1210 5,000 4,000 10,000 6 Failure Rate: A = Not Applicable
1808 500 2,000 4,000 7 Termination: 1 = Pd/Ag, T = Plated Nickel and Solder
1812 500 1,000 3,000
8 Packaging:
1825 500 1,000 3,000
1 = 7" Reel/Unmarked
2225 500 1,000 3,000
3 = 13" Reel/Unmarked
3640 100 N/A 1,000
9 = Bulk/Unmarked
9 Special Code: A = Standard
Dimensions: millimeters (inches)
SIZE 1206 1210 1808 1812 1825 2220 2225 3640
(L) Length 3.20 ± 0.20 3.20 ± 0.20 4.57 ± .254 4.50 ± .030 4.50 ± 0.30 5.72 ± 0.40 5.72 ± .254 9.14 ± .254
(0.126 ± 0.008) (0.126 ± 0.008) (0.180 ± 0.010) (0.177 ± 0.012) (0.177 ± 0.012) (0.225 ± 0.016) (0.225 ± 0.010) (0.360 ± 0.010)
(W) Width 1.60 ± 0.20 2.50 ± 0.20 2.03 ± .254 3.20 ± 0.20 6.40 ± 0.30 5.00 ± 0.40 6.35 ± .254 10.2 ± .254
(0.063 ± 0.008) (0.098 ± 0.008) (0.080 ± 0.010) (0.126 ±0.008) (0.252 ± 0.012) (0.197 ± 0.016) (0.250 ± 0.010) (0.400 ± 0.010)
(T) Thickness 1.52 1.70 2.03 2.54 2.54 3.30 2.54 2.54
max. (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (0.100)
(t) terminal min. .254 (0.010) .254 (0.010) .254 (0.010) .254 (0.010) .254 (0.010) .254 (0.010) .254 (0.010) .762 (0.030)
max. .762 (0.030) .762 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.00 (0.039) 1.02 (0.040) 1.52 (0.060)

High Voltage C0G

VOLTAGE 1206 1210 1808 1812 1825 2220 2225 3640
500/600 680 pF 1500 pF 2700 pF 5600 pF 0.012 µF 0.012 µF 0.015 µF 0.047 µF
1000 470 pF 820 pF 1500 pF 2700 pF 6800 pF 0.010 µF 0.010 µF 0.018 µF
1500 150 pF 330 pF 470 pF 1000 pF 2700 pF 2700 pF 3300 pF 8200 pF
2000 68 pF 150 pF 270 pF 680 pF 1800 pF 2200 pF 2200 pF 5600 pF
2500 — — 150 pF 390 pF 1000 pF 1000 pF 1200 pF 3900 pF
3000 — — 100 pF 300 pF 680 pF 680 pF 820 pF 2200 pF
4000 — — — — — — 1000 pF
5000 — — — — — — 680 pF

High Voltage X7R

VOLTAGE 1206 1210 1808 1812 1825 2220 2225 3640
500/600 0.015 µF 0.027 µF 0.033 µF 0.068 µF 0.015 µF 0.15 µF 0.22 µF 0.56 µF
1000 4700 pF 0.010 µF 0.015 µF 0.027 µF 0.068 µF 0.068 µF 0.082 µF 0.22 µF
1500 1200 pF 2700 pF 3900 pF 8200 pF 0.018 µF 0.022 µF 0.027 µF 0.068 µF
2000 470 pF 1000 pF 1800 pF 4700 pF 8200 pF 0.010 µF 0.012 µF 0.027 µF
2500 — — 1200 pF 2200 pF 5600 pF 6800 µF 8200 pF 0.022 µF
3000 — — 560 pF 1200 pF 2700 pF 3300 µF 4700 pF 0.018 µF
4000 — — — — — — 6800 pF
5000 — — — — — — 3300 pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #055. Visit our website http://www.avxcorp.com

55
High Voltage MLC Radials
HOW TO ORDER
SV01 A A 102 K A A
L T 1 2 3 4 5 6 7
1 AVX Style
H 2 Voltage: 1000V = A, 2000V = G, 3000V = H
4000V = J, 5000V = K
3 Temperature Coefficient: C0G = A, X7R = C
4 Capacitance Code
31.75
(1.25)
MIN
5 Capacitance Tolerance:
C0G: J = ±5% X7R: K = ±10%
S
K = ±10% M = ±20%
M = ±20% Z = +80%, -20%
6 Failure Rate: A = Does not apply
7 Leads: A = Does not apply
Dimensions: millimeters (inches)
AVX Style Length Height Thickness Lead Spacing LD Standard Packaging
(L) max. (H) max. (T) max. ±.030 (S) (Nom.) BULK
SV01 6.35 (0.250) 5.59 (0.220) 5.08 (0.200) 4.32 (0.170) .635 (0.025) SV01 300
SV02 8.13 (0.320) 7.11 (0.280) 5.08 (0.200) 5.59 (0.220) .635 (0.025) SV02 300
SV03 9.40 (0.370) 7.62 (0.300) 5.08 (0.200) 6.99 (0.275) .635 (0.025) SV03 300
SV04 11.4 (0.450) 5.59 (0.220) 5.08 (0.200) 7.62 (0.300) .635 (0.025) SV04 200
SV05 11.9 (0.470) 10.2 (0.400) 5.08 (0.200) 9.53 (0.375) .635 (0.025) SV05 200
SV06 14.0 (0.550) 7.1 (0.280) 5.08 (0.200) 10.2 (0.400) .635 (0.025) SV06 200
SV07 14.5 (0.570) 12.7 (0.500) 5.08 (0.200) 12.0 (0.475) .635 (0.025) SV07 200
SV08 17.0 (0.670) 15.2 (0.600) 5.08 (0.200) 14.6 (0.575) .635 (0.025) SV08 50
SV09 19.6 (0.770) 18.3 (0.720) 5.08 (0.200) 17.1 (0.675) .635 (0.025) SV09 50
SV10 26.7 (1.050) 12.7 (0.500) 5.08 (0.200) 22.9 (0.900) .635 (0.025) SV10 10
SV11 31.8 (1.250) 15.2 (0.600) 5.08 (0.200) 27.9 (1.100) .635 (0.025) SV11 10
SV12 36.8 (1.450) 18.3 (0.720) 5.08 (0.200) 33.0 (1.300) .635 (0.025) SV12 10
SV13 7.62 (0.300) 9.14 (0.360) 5.08 (0.200) 5.08 (0.200) .508 (0.020) SV13 300
SV14 10.2 (0.400) 11.7 (0.460) 5.08 (0.200) 5.08 (0.200) .508 (0.020) SV14 200
SV15 12.7 (0.500) 14.2 (0.560) 5.08 (0.200) 10.2 (0.400) .635 (0.025) SV15 200
SV16 22.0 (0.870) 16.8 (0.660) 5.08 (0.200) 20.0 (0.790) .813 (0.032) SV16 16
SV17 23.6 (0.930) 19.8 (0.780) 6.35 (0.250) 20.3 (0.800) .813 (0.032) SV17 10
Maximum Capacitance Value
C0G X7R
Style 1000V 2000V 3000V 4000V 5000V Style 1000V 2000V 3000V 4000V 5000V
SV01 1000pF 180pF 82pF — — SV01 .012µF 1500pF — — —
SV02 3300pF 680pF 270pF 150pF 100pF SV02 .047µF 5600pF 2700pF — —
SV03 5600pF 1200pF 470pF 270pF 180pF SV03 .082µF .01µF 4700pF 1800pF —
SV04 2200pF 470pF 180pF 100pF 68pF SV04 .033µF 3900pF 1800pF 820pF —
SV05 .015µF 3300pF 1200pF 680pF 470pF SV05 .22µF .027µF .12µF 4700pF —
SV06 .0068µF 1500pF 560pF 330pF 220pF SV06 .10µF .012µF 6800pF 2700pF 1200pF
SV07 .027µF 5600pF 2200pF 1200pF 820pF SV07 .39µF .047µF .027µF .01µF 6800pF
SV08 .039µF .01µF 3900pF 2200pF 1500pF SV08 .68µF .082µF .047µF .018µF .012µF
SV09 .068µF .015µF 6800pF 3900pF 2700pF SV09 1.00µF .12µF .068µF .027µF .018µF
SV10 .056µF .012µF 5600pF 3300pF 2200pF SV10 .82µF .10µF .056µF .022µF .018µF
SV11 .082µF .022µF .0082µF 4700pF 3300pF SV11 1.2µF .18µF .10µF .039µF .027µF
SV12 .15µF .033µF .015µF 8200pF 5600pF SV12 2.20µF .27µF .15µF .056µF .033µF
SV13 8200oF 1800pF 820pF 390pF 270pF SV13 0.10µF .012µF 6800pF 2700pF —
SV14 .015µF 4700pF 1500pF 820pF 560pF SV14 0.18µF .022µF .015µF 5600pF —
SV15 .033µF .01µF 2700pF 1800pF 1200pF SV15 0.27µF .033µF .022µF 8200pF 4700pF
SV16 .068µF .018µF 6800pF 3900pF 2700pF SV16 1.0µF .12µF .068µF .027µF .018µF
SV17 .10µF .039µF .012µF 6800pF 4700pF SV17 1.2µF .15µF .082µF .039µF .027µF
Note: Contact factory for other voltage ratings or values
and for AVX qualifications to DSCC drawings.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #056. Visit our website http://www.avxcorp.com

56
High Voltage Capacitors (European Versions)
Radial and Dual In-Line MLC
HOW TO ORDER Dual In-line only
Radial – CV CH 61 K C 103 M A 4 O A 7
1 2 3 4 5 6 7 8 9 0 s
T max. L max. 11

1 AVX Series: CH, CV

H max.
2 AVX Size
3 Voltage: A=1KVDC H=3KVDC K=5KVDC
25 (0.984)
G=2KVDC J=4KVDC
±3 (0.118) 4 Dielectric: A=C0G, C=X7R
Lead Dia.
(See table) 5 Capacitance Code
S ±0.5 6 Capacitance Tolerance: J=±5%, K=±10%, M=±20%
(0.020)
7 Specification: A=Failure rate does not apply
8 Packaging:
Dual In-line – CH CV/CH series – 4=Varnished (Single Chip Assy.)
W max 9 Lead Diameter: See Table Below
2.0
H max
(0.079)
max
0 Lead Space: See Table Below
s
11 Lead Style: 0=Straight Dual-in-line

13 (0.512) 7=‘L’ lead Dual-in-line

± 1 (0.039)

L2 L1 Dimensions: millimeters (inches)

2.54 (0.100) ± 0.5 (0.020)
Lead Lead
W max L max Size L H S Dia. Dia.
(max.) (max.) (nom.) (nom.) Code
CH41 9.2 (0.362) 8.7 (0.343) 3.8 (0.150) 8.2 (0.323) n/a
S ± 0.5 CV41 10.6 (0.417) 8.7 (0.343) 8.2 (0.323) 0.7 (0.028) 4 (0.157)
L max 3.8 (0.020)
(0.149) CH51 10.7 (0.421) 10.7 (0.421) 3.8 (0.150) 10.16 (0.400) n/a
2.54 (0.100)
max
± 0.5 (0.020) CV51 11.9 (0.469) 10.7 (0.421) 10.16 (0.400) 0.9 (0.035) 3 (0.118)
CH61 14.9 (0.587) 13.6 (0.535) 3.8 (0.150) 14.0 (0.551) n/a
CV61 16.5 (0.650) 13.6 (0.535) 15.24 (0.600) 0.9 (0.035) 3 (0.118)
CH76 21.6 (0.850) 16.6 (0.654) 3.8 (0.150) 20.32 (0.800) n/a
L2 L1
CV76 22.7 (0.894) 16.6 (0.654) 21.2* (0.835) 0.9 (0.035) 3 (0.118)
2.54 (0.100) S ± 0.5
± 0.5 (0.020) (0.020) CH91 24.0 (0.945) 40.6 (1.600) 3.8 (0.150) 20.32 (0.800) n/a
CV91 22.7 (0.894) 40.6 (1.600) 21.2* (0.835) 1.2 (0.047) 1 (0.039)

*Tolerance 0.8mm
Capacitance Ranges “T” Max = 3.8mm

C0G (pF) X7R (nF)

Size 1kV 2kV 3kV 4kV 5kV 1kV 2kV 3kV 4kV 5kV
CH41 5600 1800 820 390 330 18 8.2 4.7 1.8 1.2
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
CV41 15000 4700 1500 820 560 120 15 8.2 4.7 2.7
CH51 12000 3300 1800 1000 680 39 18 10 5.6 3.3
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
CV51 33000 10000 2700 1800 1200 270 33 18 8.2 3.9
CH61 22000 6800 3300 2200 1500 100 39 22 10 4.7
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
CV61 68000 18000 5600 3300 2200 560 82 39 15 10
CH76 47000 15000 6800 3900 2700 180 100 47 18 12
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
CV76 100000 39000 12000 6800 4700 1000 150 68 39 18
CH91 120000 47000 15000 8200 5600 390 180 82 47 22
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
CV91 330000 100000 33000 18000 12000 2700 330 180 120 56

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #057. Visit our website http://www.avxcorp.com

57
High Voltage Ceramic Capacitors
HZ Type - Strontium-based Dielectric
Capacitance Range
Style Capacitance Voltage Dimensions millimeters (inches)
Size Code
pF ±20% V DC Dmax Tmax
D max T max
100 12KV
4 (.157) max

D + 1.0 (.039) max

HZ9 150 9KV 9.5 (0.374) 9.0 (0.354)

220 6KV
250 12KV
HZ12 330 9KV 12.0 (0.472) 9.0 (0.354)
25.4 (1.00)

Ø 0.8 (.003)
430 6KV
500 12KV
HZ16 680 9KV 16.0 (0.630) 9.0 (0.354)
12.7 (0.50)
± 2 (.079) 820 6KV
750 12KV
HZ18 1000 9KV 18.0 (0.709) 9.0 (0.354)
1300 6KV
1000 12KV
HZ20 1300 9KV 20.0 (0.787) 9.0 (0.354)
1800 6KV
1250 12KV
HZ22 1600 9KV 22.0 (0.866) 10.0 (0.394)
2200 6KV
1500 12KV
HZ26 2000 9KV 26.0 (1.024) 10.0 (0.394)
2700 6KV

HP Type - Strontium-based Dielectric

Rated Test AC Corona inception Capacitance Dimensions millimeters (inches)
Style Voltage Voltage Reference voltage (kV) ± 20% D d L h
0.5 (.02) max. kVdc kVrms <5 pico C 50Hz (pF) ±1 ±1 ±2
HP 30 E Y 0751 M.-.- 750 28 (1.102) 12 (0.472) 23 (0.906) 17 (0.669)
HP 40 E Y 0142 M.-.- 1400 38 (1.500) 12 (0.472) 23 (0.906) 17 (0.669)
HP 40 E Y 0152 M.-.- 1500 38 (1.500) 12 (0.472) 23 (0.906) 17 (0.669)
h L 20 22 HP 50 E Y 0202 M.-.- 10 2000 48 (1.900) 12 (0.472) 23 (0.906) 17 (0.669)
HP 50 E Y 0252 M.-.- 2500 48 (1.900) 12 (0.472) 23 (0.906) 17 (0.669)
HP 60 E Y 0302 M.-.- 3000 58 (2.283) 15 (0.591) 23 (0.906) 17 (0.669)
HP 60 E Y 0402 M.-.- 4000 58 (2.283) 15 (0.591) 23 (0.906) 17 (0.669)
HP 30 E 3 0511 M.-.- 510 28 (1.102) 12 (0.472) 26 (1.024) 20 (0.787)
D HP 40 E 3 0941 M.-.- 940 38 (1.500) 12 (0.472) 26 (1.024) 20 (0.787)
HP 40 E 3 0102 M.-.- 1000 38 (1.500) 12 (0.472) 26 (1.024) 20 (0.787)
30 33 HP 50 E 3 0152 M.-.- 15 1500 48 (1.900) 12 (0.472) 26 (1.024) 20 (0.787)
HP 50 E 3 0172 M.-.- 1700 48 (1.900) 12 (0.472) 26 (1.024) 20 (0.787)
HP 60 E 3 0202 M.-.- 2000 58 (2.283) 15 (0.591) 26 (1.024) 20 (0.787)
HP 60 E 3 0272 M.-.- 2700 58 (2.283) 15 (0.591) 26 (1.024) 20 (0.787)
HP 30 E 4 0391 M.-.- 390 28 (1.102) 12 (0.472) 30 (1.181) 24 (0.945)
HP 40 E 4 0701 M.-.- 700 38 (1.500) 12 (0.472) 30 (1.181) 24 (0.945)
HP 40 E 4 0721 M.-.- 720 38 (1.500) 12 (0.472) 30 (1.181) 24 (0.945)
M5 40 44 HP 50 E 4 0102 M.-.- 20 1000 48 (1.900) 12 (0.472) 30 (1.181) 24 (0.945)
HP 50 E 4 0132 M.-.- 1300 48 (1.900) 12 (0.472) 30 (1.181) 24 (0.945)
d HP 60 E 4 0152 M.-.- 1500 58 (2.283) 15 (0.591) 32 (1.260) 26 (1.024)
HP 60 E 4 0202 M.-.- 2000 58 (2.283) 15 (0.591) 32 (1.260) 26 (1.024)
HP 40 E 5 0561 M.-.- 560 38 (1.500) 12 (0.472) 35 (1.378) 23 (0.906)
50 55 HP 50 E 5 0102 M.-.- 25 1000 48 (1.900) 12 (0.472) 35 (1.378) 23 (0.906)
HP 60 E 5 0112 M.-.- 1100 58 (2.283) 12 (0.472) 35 (1.378) 23 (0.906)
HP 40 E 9 0281 M.-.- 280 38 (1.500) 12 (0.472) Following
100 110 HP 50 E 9 0501 M.-.- 50 500 48 (1.900) 12 (0.472) Customers Spec.
HP 60 E 9 0851 M.-.- 850 58 (2.283) 12 (0.472) But
> 80mm
– Tightening torque; 0.3m.daN max.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #058. Visit our website http://www.avxcorp.com

58
High Voltage Ceramic Capacitors
HT/HU Types - Type I Table of Values
Style Type Dimensions millimeters (inches) Tightening Rated Rated Test Capacitance vs
ø
Size D L h [ d p e torque Type Cap. Voltage Voltage Temperature
(ISO) S (m.daN) CR (pF) VR (kV) VE TC
(kV/150Hz) (ppm/°C)
L max

h max
HT/HU30A 4.7-5.6 17 25
25.5 50 30 8 5 9 7
p HT 30 (1.00) (1.97) (1.18) (0.31) (0.20) (0.35) (0.28)
HT/HU30A 0.3 6.8 10 15
HT/HU40A 8.2 17 25
d
38 50 30 8 5 9 7 HT/HU40A 10-15 10 15 +100 ±100
HT 40 (1.50) (1.97) (1.18) (0.31) (0.20) (0.35) (0.28) 0.3 HT/HU60A 18-22 17 25
D ± 2 (.079)

HT/HU60A 27-47 10 15
e

56 55 35 12 8 13 10 HT/HU30H 10 17 25
HT 60 (2.20) (2.16) (1.38) (0.47) (0.31) (.051) (0.39) 1 HT/HU30H 12 10 15
HT/HU40H 15-22 17 25 -33 ±60
Important: HT type Hardware supplied for capacitor HT/HU40H 27-33 10 15
In order to improve capacitor mounting, connections mounting HT/HU60H 39-47 17 25
ends are designed with two flats. Thus, tightening 2 x screws TCB M5 L8
according HT/HU60H 56-100 10 15
torque is only applied on the screw (consult chart or TCB M8 L12 to Ø HT/HU30T 22 10 15
above for torque “S” value). 2 x washers HT/HU40T 27-33 17 25
HT/HU40T 39-56 10 15 -470 ±160
HU 30 22
h ± 2 (.079)

— HT/HU60T 68-82 17 25
(0.87) HT/HU60T 100-150 10 15
Height h: Depending on capacitance HT/HU30U 22-27 17 25
HU 40 30 — HT/HU30U 33-39 10 15
please consult us
D ± 2 (.079)

(1.18) HT/HU40U 47-56 17 25 -750 ±250

HT/HU40U 68-100 10 15
HU 60 42 — HT/HU60U 120-150 17 25
(1.65) HT/HU60U 180-270 10 15
Important: HU type
Handling of uncoated types must be done under strict cleanliness conditions.

HF/HB Types - Type II

CR VR VE Corona Dimensions millimeters (inches)
Style (pF) (kVrms) (kVrms) level D L l Weight
Reference (kVrms) ±1 ±2 ±1.5 (g)
“HF” HF 60 00 1250M-- 125 15 60 >14 17 (0.669) 81 (3.19) 61 (2.40) 115
HF 60 00 0100M-- 100 15 60 >14 17 (0.669) 81 (3.19) 61 (2.40) 115
HF 60 00 0500M-- 50 15 60 >14 17 (0.669) 81 (3.19) 61 (2.40) 115
HF 60 00 0250M-- 25 15 60 >14 17 (0.669) 81 (3.19) 61 (2.40) 115
D
HF 60 00 0160M-- 16 15 60 >14 17 (0.669) 81 (3.19) 61 (2.40) 115
l HF 40 00 0181M-- 180 11 42 >11 17 (0.669) 60 (2.36) 40 (1.57) 80
L HF 40 00 0750M-- 75 11 42 >11 17 (0.669) 60 (2.36) 40 (1.57) 80
HF 40 00 0360M-- 36 11 42 >11 17 (0.669) 60 (2.36) 40 (1.57) 80
HF 40 00 0240M-- 24 11 42 >11 17 (0.669) 60 (2.36) 40 (1.57) 80
HF 30 00 0251M-- 250 8 30 >8 17 (0.669) 50.5 (1.99) 30.5 (1.20) 65
HF 30 00 0101M-- 100 8 30 >8 17 (0.669) 50.5 (1.99) 30.5 (1.20) 65
HF 30 00 0180M-- 48 8 30 >8 17 (0.669) 50.5 (1.99) 30.5 (1.20) 65
HF 30 00 0320M-- 32 8 30 >8 17 (0.669) 50.5 (1.99) 30.5 (1.20) 65
HB 60 00 1250M-- 125 15 60 >14 17 (0.669) — 61 (2.40) 110
“HB” HB 60 00 0100M-- 100 15 60 >14 17 (0.669) — 61 (2.40) 110
HB 60 00 0500M-- 50 15 60 >14 17 (0.669) — 61 (2.40) 110
HB 60 00 0250M-- 25 15 60 >14 17 (0.669) — 61 (2.40) 110
l HB 60 00 0160M-- 16 15 60 >14 17 (0.669) — 61 (2.40) 110
HB 40 00 0181M-- 180 11 42 >11 17 (0.669) — 40 (1.57) 70
HB 40 00 0750M-- 75 11 42 >11 17 (0.669) — 40 (1.57) 70
HB 40 00 0360M-- 36 11 42 >11 17 (0.669) — 40 (1.57) 70
HB 40 00 0240M-- 24 11 42 >11 17 (0.669) — 40 (1.57) 70
HB 30 00 0251M-- 250 8 30 >8 17 (0.669) — 30.5 (1.20) 55
HB 30 00 0101M-- 100 8 30 >8 17 (0.669) — 30.5 (1.20) 55
HB 30 00 0180M-- 48 8 30 >8 17 (0.669) — 30.5 (1.20) 55
HB 30 00 0320M-- 32 8 30 >8 17 (0.669) — 30.5 (1.20) 55
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #059. Visit our website http://www.avxcorp.com

59
High Voltage Ceramic Capacitors

HR/HS Types - Type II

Style Dimensions millimeters (inches) Torque
CR VR VE Weight
D1 S
ø Reference (pF) (kVC~) (kVC~) D D1 L h [ d p e (m.daN) (g)
HR 30 0X 0471S-- 470 16 24 27 (1.06) 25 (0.98) 37 (1.46) 23 (0.91) 8 (0.31) 5 (0.20) 9 (0.35) 7 (0.28) 0.3 32
L ± 2 (.079)

HR 30 0Y 0471S-- 470 20 30 34 (1.34) 32 (1.26) 40 (1.57) 28 (1.10) 8 (0.31) 5 (0.20) 9 (0.35) 7 (0.28) 0.3 45
h

HR 40 0X 0102S-- 1000 16 24 39 (1.54) 37 (1.46) 37 (1.46) 23 (0.91) 8 (0.31) 5 (0.20) 9 (0.35) 7 (0.28) 0.3 65
p

HR 40 0Y 0102S-- 1000 20 30 44 (1.73) 42 (1.65) 40 (1.57) 28 (1.10) 8 (0.31) 5 (0.20) 9 (0.35) 7 (0.28) 0.3 90
D

HR 60 0Y 0222S-- 2200 20 30 54 (2.13) 52 (2.05) 47 (1.85) 28 (1.10) 12 (0.47) 8 (0.31) 13 (0.51) 10 (.039) 1 180
HR 60 0X 0502S-- 5000 16 24 55 (2.17) 54 (2.13) 40 (1.57) 21 (0.83) 12 (0.47) 8 (0.31) 13 (0.51) 10 (.039) 1 180
e

d Important: HR type Hardware supplied for capacitor mounting

(ISO)
In order to improve capacitor mounting, connections ends are 2 x screws TCB M5 L8
according
designed with two flats. Thus, tightening torque is only applied or TCB M8 L12
to Ø
on the screw (consult chart above for torque “S” value). 2 x washers
h ± 2 (.079)

HS 30 0X 0471S-- 470 16 24 17 — — 13
HS 30 0Y 0471S-- 470 20 30 19 — — 17
HS 40 0X 0102S-- 1000 16 24 26 — — 14 Handling of uncoated types must be done
D ± 2 (.079)

HS 40 0Y 0102S-- 1000 20 30 29 — — 16 under strict cleanliness conditions.

HS 60 0Y 0222S-- 2200 20 30 37 — — 14
HS 60 0X 0502S-- 5000 16 24 42 — — 8

HD/HE Types - Type II (N)

Style Dimensions millimeters (inches) Torque
ø CR VR VE S Weight
Reference (pF) (kVC~) (kVC~) D L h [ d p e (m.daN) (g)
HD 30 0X 0251S-- 250 15 20 26.5 (1.04) 33 (1.30) 16 (.630) 8 (.315) 5 (.197) 9 (.354) 7 (.276) 0.3 30
L ± 2 (.079)

HD 30 0X 0501S-- 500 15 20 26.5 (1.04) 33 (1.30) 16 (.630) 8 (.315) 5 (.197) 9 (.354) 7 (.276) 0.3 30
h

HD 40 0X 0102S-- 1000 15 20 39.5 (1.56) 33 (1.30) 16 (.630) 8 (.315) 5 (.197) 9 (.354) 7 (.276) 0.3 60
p

d HD 60 0Y 0202S-- 2000 20 30 45 (1.77) 21 (.827) 160

56.5 (2.22) 12 (.472) 8 (.315) 11 (.433) 10 (.394) 1
HD 60 0X 0302S-- 3000 15 20 40 (1.57) 19 (.748) 135
D ± 2 (.079)

Important: HD type Hardware supplied for capacitor mounting

e

In order to improve capacitor mounting, connections ends are 2 x screws TCB M5 L8

according
designed with two flats. Thus, tightening torque is only applied or TCB M8 L12
to Ø
on the screw (consult chart above for torque “S” value). 2 x washers

HE 30 0X 0251S-- 250 15 20 12 — 8
h ± 2 (.079)

HE 30 0X 0501S-- 500 15 20 17 — 9
HE 40 0X 0102S-- 1000 15 20 26 — 9 Handling of uncoated types must be done
under strict cleanliness conditions.
HE 60 0Y 0202S-- 2000 20 30 42 — 12
D ± 2 (.079)

HE 60 0X 0302S-- 3000 15 20 42 — 9

Important: HE type

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #060. Visit our website http://www.avxcorp.com

60
High Voltage Ceramic Capacitors
HV/HW Types – Feed-Thru – Type II
HV 30 00 0102 M-- HW 30 00 0102 M--
ø 5 (.197)
5 (.197)
± 1 (.039)
Fastening hole
25 (.984
±3 (.118) ø 30 (1.18)
±1 (.039) 22 (.866) 5 (.197)
± 2 (.079)
1 (.039)
max
15 (.590)
max
5 (.197)

ø 11 (.433) ø 11.1 (.437)

15 (.590)
2 nuts 17 on flats. th. = 2 Important
Handling of uncoated type must be done
20 (.787) ø 2 (.079)
under strict cleanliness conditions.

HC Type Custom Designed Cascades – Type II

How to Design the Stacks
• The design of the capacitor assembly can be done by possible, do not hesitate to consult us for any particular
choosing the desired parameter among the different pos- requirement or information.
sibilities listed below. Since not all combinations may be

No. of Discs: 2 to 14 Disc Dia.: 4 to 15mm

Voltage/Disc: 6 to 20kVDC Cap Value/Disc: 100pF to 1200pF
millimeters (inches)
Spacer Style Number of Rated Voltage Size Dielectric Type Capacitance
Style Number Elements (kVDC ) (disc diameter) TPC codes/ε/ class per Disc (pF)

1 Z
2 2600
X7R 100
3 8
2 120
4 150
6
5 (0.236) 180
4
3 10
6 3300 220
8 Y5T
7 250
(0.315)
4 8 12 270
9 330
10
5 10 (0.394) W 390
16 7000
11 Z5U 470
12 680
6 12 (0.472)
20 820
13
7 1000
Encapsulated 14 17.5
version, high (0.689)
voltage dedicated

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #061. Visit our website http://www.avxcorp.com

61
Power Ceramic Capacitors
WA Type Plates - Type I / Type II
Styles and Dimensions
Dimensions millimeters (inches) Weight
Style Type D E [ (g) Assembly Parts
max min max M min max Each capacitor is delivered with
two silvered fixing screws and two
silvered lockwashers. Washer
WA02 23 (.906) 15 (.590) 25 (.984) 5 (.197) 12 32 thickness and screw lengths are
defined in order to avoid any pull up
WA03 33 (1.30) 14 (.551) 25 (.984) 5 (.197) 20 50 on ceramic plate center and conse-
quent destruction of connections.

WA04 45 (1.77) 15 (.590) 25 (.984) 6 (.236) 40 100

Type
WA05 58 (2.28) 15 (.590) 25 (.984) 6 (.236) 50 120 [ Screw Washer
M5 TCB M5-4.5 AZ 8/1.5
WA06 65 (2.56) 16 (.630) 25 (.984) 6 (.236) 100 200
M6 TR M6-6 AZ 11/2

Type I Plates: Table of Values

Capacitance TC
Type ranges (ppm / °C) VR VE Irms WR max
(pF) ∆θ = 45°C (kVc) (kV ~ / 50 Hz) (A) (kVAR)
WA 02 A0 .... • -- 5.6-15 5 7.5 5 4
WA 03 A0 .... • -- 10-33 + 100 ± 100 5 7.5 9 14
WA 04 A0 .... • -- 20-56 5 7.5 15 20
WA 05 A0 .... • -- 68-110 5 7.5 18 40
WA 02 H0 .... • -- 20-27 5 7.5 6 10.8 ... 9.2
WA 03 H0 .... • -- 30-68 7/5 7.5 10 24 ... 20
WA 04 H0 .... • -- 62-120 – 33 ± 60 7/6 7.5 15 31 ... 26
WA 05 H0 .... • -- 120-168 7/6 7.5 18 38 ... 31
WA 02 T0 .... • -- 30-56 5 7.5 5 4
WA 03 T0 .... • -- 62-120 5 7.5 9 11
WA 04 T0 .... • -- 130-240 – 470 ± 160 5 7.5 15 15
WA 05 T0 .... • -- 240-330 5 7.5 18 20
WA 02 U0 .... • -- 62-100 6.5/5 10 8 30 ... 25
WA 03 U0 .... • -- 110-220 7.5/5.5 10 11 35 ... 30
WA 04 U0 .... • -- 220-390 – 750 ± 250 6.7/5.5 10 15 38 ... 35
WA 05 U0 .... • -- 330-560 7.2/6 10 18 55 ... 50
Remarks: When two values are specified for power or voltage the higher value is indicated
for min capacitance and the lower value for max capacitance of the range.

Type II Plates: Table of Values

Capacitance TC
Type ranges (ppm / °C) VR VE Irms WR max
(pF) ∆θ = 45°C (kVc) (kV ~ / 50 Hz) (A) (kVAR)
WA 02 W0 0102S -- 1000 3.5 7.5 10 0.25
WA 02 W0 0152S -- 1500 3.5 7.5 10 0.25
WA 03 W0 0222S -- 2200 3.5 7.5 20 0.5
WA 03 W0 0332S -- 3300 3.5 7.5 20 0.5
WA 04 W0 0472S -- 4700 Type II 3.5 7.5 25 1
WA 04 W0 0682S -- 6800 3.5 7.5 25 1
WA 04 W0 0103S -- 10000 3.5 7.5 25 1
WA 05 W0 0103S -- 10000 4 8 30 1
WA 05 W0 0223S -- 22000 3.5 7.5 30 1
WA 06 W0 0223S -- 22000 4 8 35 1

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #062. Visit our website http://www.avxcorp.com

62
Power Ceramic Capacitors
WR Type Plates - Type I / Type II
References - Dimensions
Dimensions millimeters (inches) Weight
Style Type D E [ (g) Assembly Parts
max min max M min max Each capacitor is delivered with
two silvered fixing screws and two
silvered lockwashers. Washer
WR02 23 (.906) 16 (.630) 20 (.787) 5 (.197) 12 32 thickness and screw lengths are
defined in order to avoid any pull up
WR03 33 (1.30) 16 (.630) 27 (1.06) 5 (.197) 20 50 on ceramic plate center and conse-
quent destruction of connections.

WR04 45 (1.77) 16 (.630) 28 (1.10) 5 (.197) 40 100

Type
WR05 58 (2.28) 16 (.630) 26 (1.02) 6 (.236) 50 120 [ Screw Washer
M5 TCB M5-4.5 AZ 8/1.5
WR06 65 (2.56) 16 (.630) 28 (1.10) 6 (.236) 100 200
M6 TR M6-6 AZ 11/2

Table of Values
Capacitance TC VR (kVc) VE Wr max
Type ranges (ppm / °C) in oil Irms (kVAR)
(pF) Air Oil (kV ~ / 50 Hz) (A) ∆U ≤ 45°C
WR03A 4.7 1.5 17 25 9 6
WR03A 6.8-10 +100 ± 100 1.5 10 15 9 6
WR04A 6.8-10 2 17 25 15 10
WR04A 12-18 2 10 15 15 10
WR02H 10 1 17 25 5 1.5
WR02H 12-18 1 10 15 5 1.5
WR03H 12-18 1.5 17 25 9 6
WR03H 22 1.5 10 15 9 6
WR04H 27 -33 ± 60 2 17 25 15 11.5
WR04H 33-47 2 10 15 15 11.5
WR05H 56 2.5 17 25 18 20
WR05H 68-100 2.5 10 15 18 20
WR02T 15-18 1 17 25 5 1.5
WR02T 22-27 1 10 15 5 1.5
WR03T 33 1.5 17 25 9 6
WR03T 39-47 -470 ± 160 1.5 10 15 9 6
WR04T 56-68 2 17 25 15 11.5
WR04T 82-100 2 10 15 15 11.5
WR05T 120-150 2.5 17 25 18 17.5
WR05T 180 2.5 10 15 18 17.5
WR02U 33 1 17 25 5 1.5
WR02U 47-56 1 10 15 5 1.5
WR03U 47-68 1.5 17 25 9 6
WR03U 82-100 1.5 10 15 9 6
WR04U 82-120 -750 ± 250 2 17 25 15 11.5
WR04U 150-220 2 17 25 15 11.5
WR05U 150-220 2.5 17 25 18 17.5
WR05U 270-330 2.5 10 15 18 17.5
WR06U 220-270 3 17 25 40 22
WR06U 330-470 3 10 15 40 18
WR02W 1000 2.5 5 10 0.25
WR03W 2200 Type II 2.5 5 10 See 0.50
WR03W 3300 See curve 2.5 5 10 curve 0.50
WR04W 4700 below 2.5 5 10 below 1
WR04W 6800 2.5 5 10 1

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #063. Visit our website http://www.avxcorp.com

63
Power Ceramic Capacitors
WT / WF Type Tubes - Type I
Type WT Type WF

Thickness 2 Screw-bolt: M7-L18 Dimensions: millimeters (inches)

References - Capacitance Range

Wm Dimensions millimeters (inches)
CR TC VR VE Irms ∆u 45°C L D Weight
Reference (pF) (ppm/°C) (kVc) (kV~/50Hz) (A) (kVAR) min max max l 1±3 l 2±3 Ø (A)
120-150-160-200
WT09A –100 ±100 8.5 12 25 90 80 (3.15) 100 (3.94) 48 (1.89) 46 (1.81) 30 (1.18) 17/26 (.669/1.02) 235
220-240-280
WT/WF10T 510-560 8.5 12 50 115 80 (3.15) 100 (3.94) 70 (2.76) 50 (1.81) 32 (1.26) 30/36 (1.18/1.42) 480
WT/WF11T 680-750 –470 ±160 8.5 12 50 85 (3.35) 110 (4.33) 70 (2.76) 45 (1.97) 22 (.866) 32/37 (1.26/1.46) 510/650
WT/WF12T 680-820 8.5 12 50 160 100 (3.94) 120 (4.72) 70 (2.76) 50 (1.81) 22 (.866) 31/37 (1.22/1.46) 660/715
WT/WF14T 1000 8.5 12 50 180 110 (4.33) 140 (5.51) 70 (2.76) 55 (2.17) 22 (.866) 35/39 (1.38/1.54) 750
WT/WF10U 820-1000 8.5 12 50 75 80 (3.15) 100 (3.94) 70 (2.76) 50 (1.81) 32 (1.26) 30/36 (1.18/1.42) 480
WT/WF11U 1000-1200 –750 ±250 8.5 12 50 75 90 (3.54) 110 (4.33) 70 (2.76) 45 (1.97) 22 (.866) 30/35 (1.18/1.38) 510/650
WT/WF12U 1500 8.5 12 50 85 100 (3.94) 120 (4.72) 70 (2.76) 50 (1.81) 22 (.866) 33/37 (1.30/1.46) 660/715
WT/WF14U 1800-2000 8.5 12 50 100 120 (4.72) 140 (5.51) 70 (2.76) 55 (2.17) 22 (.866) 33/38 (1.30/1.50) 750
WT/WF14V 4700 –1500 ± 500 6 8.5 35 35 120 (4.72) 140 (5.51) 70 (2.76) 55 (2.17) 22 (.866) 35/40 (1.38/1.57) 800
Remarks: Min weights indicate max capacitances and reciprocally.
References - Capacitance Range / Electrical Characteristics
VE With ventilation Reason Dimensions millimeters (inches) Mean
CR TC VR (kV~ Irms WR |rms WR Frequen. L weight Flange
Reference (pF) (ppm/°C) (kVc) 50Hz) (A) (kVAR) (A) (kVAR) (MHz) min max D d1 d2 (g) Color
WT27A00331K— 330 12 17 65 300 37 110 (4.33) 130 (5.12) 90 (3.54) 70 (2.75) 64 (2.52) 1500 White
WT27A00501K— 500 12 17 65 300 170 (6.69) 200 (7.87) 92 (3.62) 71 (2.80) 58 (2.28) 1800 White
WT27A00821K— 820 +100 ±100 18 26 65 450 78 700 33 240 (9.45) 270 (10.62) 91 (3.58) 70 (2.75) 58 (2.28) 2000 White
WT27A00102K— 1000 15 21 65 300 240 (9.45) 270 (10.62) 91 (3.58) 70 (2.75) 58 (2.28) 2000 White
WT27H00102K— 1000 –33 ± 60 18 26 30 135 240 (9.45) 270 (10.62) 86 (3.39) 66 (2.60) 47 (1.85) 2700 Green
WT27T00152K— 1500 18 26 65 350 240 (9.45) 270 (10.62) 91 (3.58) 74 (2.91) 50 (1.98) 3100 Orange
WT27T00222K— 2200 –470 ±160 15 21 72 375 240 (9.45) 270 (10.62) 90 (3.54) 70 (2.75) 60 (2.36) 2500 Orange
WT27U00222K— 2200 18 26 54 275 70 600 240 (9.45) 270 (10.62) 88 (3.46) 67 (2.64) 47 (1.85) 2900 Yellow
WT27U00332K— 3300 –750 ±250 15 21 60 275 240 (9.45) 270 (10.62) 90 (3.54) 70 (2.75) 53.5 (2.11) 2400 Yellow
WT27U00402K— 4000 15 21 60 275 240 (9.45) 270 (10.62) 90 (3.54) 70 (2.75) 53.5 (2.11) 2400 Yellow
WT 27 Type Tubes - Type I

Remarks:

It is strongly recommended to tighten again

connections after a certain working time.
Dim. (mm)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #064. Visit our website http://www.avxcorp.com

64
Multilayer Ceramic Chip Trimmer Capacitors
CTZ2 Series
HOW TO ORDER
CTZ2 E - 03 A - W 2 - P
1 2 3 4 5 6 7
1 CTZ2 Series
2 Type: S=Reflow non-washable type, E=Reflow washable type
3 Maximum Capacitance:
03=3pF, +100, -0%; 05=5pF, +100, -0%;
10=10pF, +100, -0%; 20=20pF, +100, -0%
4 Temperature Characteristic:
A=NP0±500ppm/°C, C=N750±500 ppm/°C
5 Packaging Method:
B=Bulk, W=Taping (W direction), X=Taping (X direction)
6 Standard Packaged Quantity: 2=2000 pcs per reel
7 Standard: P=Philips adjust
Optional: A=Setting drift ±1% (Philips adjust)
I=Ultra thin 1.0mm max.

Philips Adjustment Dimensions Note: Bulk packaging = 2,000 pcs

2.5±0.1
1.0±0.1
0.72±0.1 0.45±0.1 0.7±0.1
0.70±0.1 0.50±0.1
0.23±0.1 0.35±0.1
(0.55)
3.0±0.1

2.3+0.15
-0.05
0.25±0.05
1.5±0.1
1.0±0.1

0.23±0.1 0.27±0.05 0.35±0.1

0.70±0.1
(0.5)
0.72±0.1 0.45±0.15 0.7±0.1
1.0±0.1
0.72±0.1
Effective terminal area
1.5±0.1 1.3 max Unit: mm

Specifications
TYPE CTZ2-A TYPE CTZ2-P
Min. cap Max. cap TC Voltage Min. cap Max. cap TC Voltage
Part No. Part No.
value (pF) value (pF) (ppm/°C) Rating value (pF) value (pF) (ppm/°C) Rating
CTZ2s-03A 2 3 NP0±500 25V CTZ2s-03A 2 3 NP0±500 25V
CTZ2s-05A 3 5 NP0±500 25V CTZ2s-05A 3 5 NP0±500 25V
CTZ2s-05C 2.5 5 N750±500 25V CTZ2s-05C 2.5 5 N750±500 25V
CTZ2s-10A 3 10 NP0±500 25V CTZ2s-10A 3 10 NP0±500 25V
CTZ2s-10C 5 10 N750±500 25V CTZ2s-10C 5 10 N750±500 25V
CTZ2s-20C 5.5 20 N750±500 25V CTZ2s-20C 5.5 20 N750±500 25V
CTZ2s-30C 7 30 N750±500 25V CTZ2s-30C 7 30 N750±500 25V

TYPE CTZ2-I
Min. cap Max. cap TC Voltage
Part No.
value (pF) value (pF) (ppm/°C) Rating
CTZ2s-03A 2 3 NP0±500 25V
CTZ2s-05A 3 5 NP0±500 25V
CTZ2s-05C 2.5 5 N750±500 25V
CTZ2s-10A 3 10 NP0±500 25V
CTZ2s-10C 5 10 N750±500 25V
CTZ2s-20C 5.5 20 N750±500 25V
CTZ2s-30C 7 30 N750±500 25V

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #065. Visit our website http://www.avxcorp.com

65
Multilayer Ceramic Chip Trimmer Capacitors
CTZ3 Series
HOW TO ORDER
CTZ3 E – 03 A – W – 1 – P F
1 2 3 4 5 6 78
1 CTZ3 Series
2 Type: S=Reflow non-washable type,
E=Reflow washable type
3 Maximum Capacitance:
03=3pF, +100, -0%; 05=5pF, +100, -0%;
10=10pF, +100, -0%; 20=20pF, +100, -0%;
30=30pF, +100, -0%; 40=40pF, +100, -0%
4 Temperature Characteristic:
A=NP0±500ppm/°C, B=N400±500ppm/°C,
Philips Adjustment Dimensions C=N750±500 ppm/°C
3.2±0.1
0.45±0.1
0.78 5 Packaging Method:
0.9±0.1
0+0.2
-0 0.12±0.06
(0.09)
B=Bulk, W=Taping (W direction)
0.5±0.1 (1.0)
+0
0.6-0.1 X=Taping (X direction option)
4.5±0.1
(0.65)
6 Packaging Quantity: (per reel)
2.3±0.1
3.0+0.15
-0.06
0.35±0.06 (1.8) 1=1000 pcs, 5=5000 pcs
1.0±0.1
7 Standard: P=Philips Adjust
0.4±0.1 0.32±0.06 +0
Optional:
0.6-0.1
0.78±0.06
0.15±0.06 (0.1)
A=Setting drift ±1% (Philips adjust)
0.45±0.01
0+0.2
-0
1.1±0.1 1.8max
0.6
P1.5=Product height 1.5mm max.
1.7±0.1 Effective terminal area (Philips adjust)
Unit: mm PR=Reverse Type (bottom adjust)
Lead Form Dimensions
3.2±0.1
0.78
8 Standard: F=Lead Form
0.9±0.1 0.45±0.1
0+0.2
-0 0.12±0.06
+0
0.5±0.1 0.6-0.1

4.5±0.1
3.0+0.15
-0.06
2.3±0.1 0.5±0.05
1.0±0.1

0.4±0.1 0.35±0.06 +0
0.6-0.1
0.15±0.06
0.78±0.05
0+0.2 0.45±0.01
-0 0.6
1.1±0.1 1.8max
1.7±0.1
Effective terminal area
Unit: mm
Specifications
TYPE CTZ3-A (max. height - 1.8mm) TYPE CTZ3-P (max. height - 1.8mm)
Min. cap Max. cap TC Voltage Min. cap Max. cap TC Voltage
Part No. Part No.
value (pF) value (pF) (ppm/°C) Rating value (pF) value (pF) (ppm/°C) Rating
CTZ3s-03A 1.5 3 NP0±500 25V CTZ3s-03A 1 3 NP0±500 25V
CTZ3s-05A 2 5 NP0±500 25V CTZ3s-05A 1.5 5 NP0±500 25V
CTZ3s-05C 3 5 N750±500 25V CTZ3s-05C 2 5 N750±500 25V
CTZ3s-10A 4 10 NP0±500 25V CTZ3s-10A 2.5 10 NP0±500 25V
CTZ3s-10B 2 10 N400± 500 25V CTZ3s-10B 1.5 10 N400±500 25V
CTZ3s-10C 3 10 N750±500 25V CTZ3s-10C 3 10 N750±500 25V
CTZ3s-20C 7.5 20 N750±500 25V CTZ3s-20C 5 20 N750±500 25V
CTZ3s-30C 7.5 30 N750±500 25V CTZ3s-30C 5 30 N750±500 25V
CTZ3s-40C 7.5 40 N750±500 25V CTZ3s-40C 5 40 N750±500 25V
CTZ3s-50C 12.5 50 N750±500 25V CTZ3s-50C 7 50 N750±500 25V

TYPE CTZ3-P1.5 (max. height - 1.8mm) TYPE CTZ3-PR (max. height - 1.8mm)
Min. cap Max. cap TC Voltage Min. cap Max. cap TC Voltage
Part No. Part No.
value (pF) value (pF) (ppm/°C) Rating value (pF) value (pF) (ppm/°C) Rating
CTZ3s-03A 1 3 NP0±500 25V CTZ3s-03A 1 3 NP0±500 25V
CTZ3s-05A 1.5 5 NP0±500 25V CTZ3s-05A 1.5 5 NP0±500 25V
CTZ3s-05C 2 5 N750±500 25V CTZ3s-05C 2 5 N750±500 25V
CTZ3s-10A 2.5 10 NP0±500 25V CTZ3s-10A 2.5 10 NP0±500 25V
CTZ3s-10B 1.5 10 N400±500 25V CTZ3s-10B 1.5 10 N400±500 25V
CTZ3s-10C 3 10 N750±500 25V CTZ3s-10C 3 10 N750±500 25V
CTZ3s-20C 5 20 N750±500 25V CTZ3s-20C 5 20 N750±500 25V
CTZ3s-30C 5 30 N750±500 25V CTZ3s-30C 5 30 N750±500 25V
CTZ3s-40C 5 40 N750±500 25V CTZ3s-40C 5 40 N750±500 25V
CTZ3s-50C 7 50 N750±500 25V CTZ3s-50C 7 50 N750±500 25V
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #066. Visit our website http://www.avxcorp.com

66
Surface Mount Tantalum Capacitors
TACmicrochip
HOW TO ORDER
L TAC L 225 M 003 R **
Lt S Lt 1 2 3 4 5 6 7
1 Type: Microchip
H 2 Case: L=0603, R=0805
3 Capacitance: pF code: 1st two digits represent significant figures,
3rd digit represents multiplier (number of zeros to follow)
4 Capacitance Tolerance: K=±10%, M=±20%
W 5 Rated DC Voltage
Polarity Stripe Identifies
Positive Termination 6 Packaging Termination Finish:
X=8mm 4 1/4" Tape & Reel, R=7" Tape and Reel Solder Plated
(For Gold Plated, Solder Plated or Waffle Packaging - Consult Factory)
7 Additional characters may be added for special requirements
Ratings and Part Number Reference-0603
Dimensions: millimeters (inches)
AVX Case Capacitance Leakage DF ESR Max
Case Size L S W H Style Size µF@120Hz µA (Max) % Max @100kHz
0603 (1608) 1.6 +0.25 0.8 min 0.85 +0.20
-0.10 0.85 +0.20
-0.10
(2 volt)
-0.15
(0.063 +.010 (0.033 +.008 (0.033 +.008 TAC 0603 3.3 0.5 6 10
-.006 ) (0.031) min -.004 ) -.004 )
TAC 0603 4.7 0.5 6 10
0805 (2012) 2.0 +0.25
-0.15
1.1 min 1.35 +0.20
-0.10 1.35 +0.20
-0.10 TAC 0603 6.8 0.5 6 10
(0.079 +.010
-.006 ) (0.043) min (0.053 +.008
-.004 ) (0.053 +.008
-.004 ) (3 volt)
TAC 0603 2.2 0.5 6 10
TAC 0603 3.3 0.5 6 10
Capacitance and Voltage Matrix TAC 0603 4.7 0.5 6 10
TAC 0603 6.8 0.5 6 10
Rated Voltage at 85°C TAC 0603 10 0.5 6 10
Cap µF Code 2 3 4 6.3 10 (4 volt)
0.47 474 0603j
S TAC 0603 1.5 0.5 6 10
TAC 0603 2.2 0.5 6 10
0.68 684 0603j
S
TAC 0603 3.3 0.5 6 10
1.0 105 0603j
S 0603j
S TAC 0603 4.7 0.5 6 10
1.5 155 0603j
S 0603E 0603E (6.3 volt)
2.2 225 0603j
S 0603j
S 0603E 0603E TAC 0603 1.0 0.5 6 10
3.3 335 0603j
S 0603j
S 0603E 0603D 0805j
S TAC 0603 1.5 0.5 6 10
TAC 0603 2.2 0.5 6 10
4.7 475 0603j
S 0603E 0603E 0603D 0805j
S
(10 volt)
6.8 685 0603E 0603E 0805j
S 0805E
TAC 0603 0.47 0.5 6 10
10 106 0603E 0805j
S 0805j
S 0805E TAC 0603 0.68 0.5 6 10
15 156 0805j
S 0805j
S 0805D TAC 0603 1.0 0.5 6 10
TAC 0603 1.5 0.5 6 10
22 226 0805j
S 0805E TAC 0603 2.2 0.5 6 10
33 336 0805E 0805E 0805E
47 476 0805E 0805D Ratings and Part Number Reference-0805
AVX Case Capacitance Leakage DF ESR Max
j = Standard Range s = Extended Range d = Development Range Style Size µF@120Hz µA (Max) % Max @100kHz
(2 volt)
TAC 0805 22 0.5 8 6
TAC 0805 33 0.7 8 6
Enhancing Leakage TAC 0805 47 1.0 8 6
Current & Battery Efficiency (3 volt)
70 TAC 0805 15 0.5 8 6
TACL155M006 TAC 0805 22 0.7 8 6
60 vs Voltage TAC 0805 33 1.0 8 6
50 (Typical) (4 volt)
DCL/nA

40 TAC 0805 10 0.5 8 6

TAC 0805 15 0.6 8 6
30 TAC 0805 33 1.3 8 6
20 (6.3 volt)
TAC 0805 6.8 0.5 8 6
10 TAC 0805 10 0.6 8 6
0 TAC 0805 15 0.9 8 6
0 1 2 3 4 5 6 (10 volt)
Voltage/V TAC 0805 3.3 0.5 8 6
TAC 0805 4.7 0.5 8 6
TAC 0805 6.8 0.7 8 6
TAC 0805 10 1.0 8 6

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #067. Visit our website http://www.avxcorp.com

67
Surface Mount Tantalum Capacitors
TAZ Series
W L HOW TO ORDER
TAZ D 335 M 015 C R SZ 0000
1 2 3 4 5 67 8 9
H H 1 Type
2 Case Code: (See table)
3 Capacitance Code
W1 A S A 4 Tolerance: J=±5%, K=±10%, M=±20%
5 Rated DC Voltage
Dimensions: millimeters (inches) 6 Lead Configuration:
Case Length Width Height Term. Width Term. Length “S” Min C = Chip, X = Extended Range
Code L±.38 (0.015) W±.38 (0.015) H±.38 (0.015) W1±.13 (0.005) A±.13 (0.005)
7 Packaging: R = 7" tape and reel
“Regular”
S = 13" tape and reel
A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27 (0.050) .76 (0.030) .38 (0.015)
8 Manufacturing Routing and Failure Rate:
B 3.81 (0.150) 1.27 (0.050) 1.27 (0.050) 1.27 (0.050) .76 (0.030) 1.65 (0.065)
S = Standard, Z = Not applicable
D 3.81 (0.150) 2.54 (0.100) 1.27 (0.050) 2.41 (0.095)* .76 (0.030) 1.65 (0.065)
9 Termination Finish*:
E 5.08 (0.200) 2.54 (0.100) 1.27 (0.050) 2.41 (0.095)* .76 (0.030) 2.92 (0.115)
0000 = Fuse solder plated
F 5.59 (0.220) 3.43 (0.135) 1.78 (0.070) 3.30 (0.130) .76 (0.030) 3.43 (0.135) 0800 = Hot solder dipped
G 6.73 (0.265) 2.79 (0.110) 2.79 (0.110) 2.67 (0.105) 1.27 (0.050) 3.56 (0.140) 0900 = Gold plated*
H 7.24 (0.285) 3.81 (0.150) 2.79 (0.110) 3.68 (0.145)** 1.27 (0.050) 4.06 (0.160)
Note: For solder coated terminations add 0.38 (0.015) max. to length and height Standard Packaging
dimensions.
TAPE & REEL
7" 13"
* Tolerance: +0.13/-0.25 (+0.005/-0.010) A 2,500 9,000
** Tolerance: +0.13/-0.51 (+0.005/-0.020)
B 2,500 9,000
C 2,500 9,000
D 2,500 8,000
E 2,500 8,000
F 1,000 3,000
G 500 2,500
H 500 2,500

Capacitance and Voltage Range (letter denotes case code)

Capacitance Rated Voltage (VR) at 85°C
µF Code 4V 6V 10V 15V 20V 25V 35V 50V
0.1 104 A
0.15 154 A
0.22 224 A B
0.33 334 A B
0.47 474 A B
0.68 684 A B A B D
1.0 105 A A B B D E
1.5 155 A B D E F
2.2 225 A B A D B E D F
3.3 335 B A D B E D E F G
4.7 475 B A D B E D E F G H
6.8 685 D B E D F E G F H
10 106 D B E D F E G H
15 156 E D F E G F H
22 226 D F E E G F H G H
33 336 F E G H
47 476 G H F H
68 686 G H F G H
100 107 H F G H
150 157 G
220 227 H
j = Standard Range
s = Extended Range Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #068. Visit our website http://www.avxcorp.com

68
Surface Mount Tantalum Capacitors
TAJ Series - Solid Tantalum Chip Capacitors (EIA Standard)
HOW TO ORDER
L W
TAJ B 335 M 016 R *
1 2 3 4 5 67
H
1 Type
2 Case Code: (See table below)
3 Capacitance Code:
pF Code: 1st two digits represent significant
A S A W1 figures, 3rd digit represents multiplier
(number of zeros to follow)
Standard Packaging 4 Tolerance:
TAPE & REEL K=±10%, M=±20%
7" 13" (J=±5%, consult factory for details)
A 2,000 8,000
B 2,000 8,000 5 Rated DC Voltage
C 500 3,000 6 Packaging: R=7" tape and reel, S=13" tape and reel
D 500 2,500 7 Additional characters may be added for
E 400 1,500
special requirements
V 400 1,500
Dimensions: millimeters (inches)
Code EIA L±0.2 (0.008) W+0.2 (0.008) H+0.2 (0.008) W1±0.2 (0.008) A+0.3 (0.012) S Min.
Code -0.1 (0.004) -0.1 (0.004) -0.2 (0.008)
A 3216 3.2 (0.126) 1.6 (0.063) 1.6 (0.063) 1.2 (0.047) 0.8 (0.031) 1.1 (0.043)
B 3528 3.5 (0.138) 2.8 (0.110) 1.9 (0.075) 2.2 (0.087) 0.8 (0.031) 1.4 (0.055)
C 6032 6.0 (0.236) 3.2 (0.126) 2.6 (0.102) 2.2 (0.087) 1.3 (0.051) 2.9 (0.114)
D 7343 7.3 (0.287) 4.3 (0.169) 2.9 (0.114) 2.4 (0.094) 1.3 (0.051) 4.4 (0.173)
E 7343H 7.3 (0.287) 4.3 (0.169) 4.1 (0.162) 2.4 (0.094) 1.3 (0.051) 4.4 (0.173)
3.45±0.3
V — 6.1 (0.240) 7.3 (0.287) (0.136±0.012) 3.1 (0.122) 1.4 (0.055) 3.4 (0.134)
W1 dimension applies to the termination width for A dimensional area only.

Capacitance and Voltage Range (letter denotes case code)

Capacitance Rated Voltage (VR) at 85°C
µF Code 2V 4V 6.3V 10V 16V 20V 25V 35V 50V
0.10 104 A A
0.15 154 A A/B
0.22 224 A A/B
0.33 334 A B
0.47 474 A A/B C
0.68 684 A A A/B C
1.0 105 A A A B A C
1.5 155 A A A A/B B/C A D C
2.2 225 A A A/B A/B B A B/C D
3.3 335 A A A/B A/B B/C CB D
4.7 475 A A A/B BA B/C A C B C/D B D
6.8 685 A A/B A/B B/C A B/C C B DC D
10 106 A A/B B/C A B/C A CB C/D DC
15 156 BA BA B/C A C B C/D B D DC
22 226 A B/C A CBA C/D B DCB DC ED
33 336 A/B CBA C/D B DCB DC ED D
47 476 A BA C/D B DCB DC DC D E
68 686 B/C C/D B DC DC ED VE
100 107 B/C DCB D C ED D/E
150 157 B B C/D E D D E
220 227 C/D C/D E D D/E
330 337 C E DE D/E/ V E
470 477 E/VD E V
680 687 D E V
1000 108 D E
1500 158 E

BOLD = Standard Range

s = Extended Range Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
d = Development Range Call 1-800-879-1613 and request document #069. Visit our website http://www.avxcorp.com

69
Surface Mount Tantalum Capacitors
TAJ Series - Low Profile Solid Tantalum Chip Capacitors
HOW TO ORDER
L W
TAJ R 105 K 010 R *
1 2 3 4 5 6 7
H
1 Type
2 Case Code: (See table below)
3 Capacitance Code:
pF Code: 1st two digits represent significant
A S A W1 figures, 3rd digit represents multiplier
(number of zeros to follow)
4 Tolerance:
Standard Packaging K=10%, M=±20%
TAPE & REEL (J=±5%, consult factory for details)
7" 13"
5 Rated DC Voltage
R 2,500 10,000
S 2,500 10,000 6 Packaging: R=7" tape and reel,
T 2,500 10,000
S=13" tape and reel
W 1,000 5,000 7 Additional characters may be added for
Y 1,000 4,000 special requirements

Dimensions: millimeters (inches) - metric dimensions govern

Code EIA L±0.2 W+0.2 (0.008) H max. W1±0.1 A+0.30 (0.012) S Min.
Code (0.008) -0.1 (0.004) (0.004) -0.1 (0.004)
0805 Equivalent
R 2012 2.05 (0.081) 1.3 (0.051) 1.2 (0.047) 1.2 (0.047) 0.5 (0.020) 0.85 (0.033)
Low Profile Versions
S 3216L 3.2 (0.126) 1.6 (0.063) 1.2 (0.047) 1.2 (0.047) 0.8 (0.031) 1.1 (0.043)
T 3528L 3.5 (0.138) 2.8 (0.110) 1.2 (0.047) 2.2 (0.087) 0.8 (0.031) 1.4 (0.055)
W — 6.0 (0.236) 3.2 (0.126) 1.5 (0.059) 2.2 (0.087) 1.3 (0.051) 2.9 (0.114)
Y — 7.3 (0.287) 4.3 (0.169) 2.0 (0.079) 2.4 (0.094) 1.3 (0.051) 4.4 (0.173)
W1 dimension applies to the termination width for A dimensional area only.
Pad stand-off is 0.1±0.1.
Capacitance and Voltage Range (letter denotes case code)
Capacitance Rated Voltage (VR ) at 85°C
µF Code 2V 4V 6.3V 10V 16V 20V 25V
0.10 104 R/S
0.15 154 R/S
0.22 224 R/S
0.33 334 R/S
0.47 474 R/S
0.68 684 R/S R/S/T
1.0 105 R/S R/S/T R/S/T
1.5 155 R/S R/S S T
2.2 225 R/S R/S R/S T T
3.3 335 R/S R/S S/T T
4.7 475 R R/S S/T T R
6.8 685 R S/T T T W
10 106 S R/T R T W
15 156 T W X
22 226 W W Y
33 336 W W W
47 476 X
68 686 W Y W X Y
100 107 W Y Y
150 157 W XY
220 227 W X Y
330 337 W X Y
470 477 X Y
680 687 X/Y
1000 108 Y
BOLD = Standard Range X = 1.5mm height in a D case footprint
s = Extended Range
d = Development Range Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #070. Visit our website http://www.avxcorp.com

70
Surface Mount Tantalum Capacitors
TPS Series - Low ESR Solid Tantalum Chip Capacitors (EIA Standard)
HOW TO ORDER
L W
TPS E 107 M 016 R 0100
1 2 3 4 5 6 7
H
1 Type
2 Case Code: (See table below)
3 Capacitance Code:
pF Code: 1st two digits represent significant
A S A W1 figures, 3rd digit represents multiplier
(number of zeros to follow)
4 Tolerance:
Dimensions: millimeters (inches) K=10%, M=±20%
Code EIA W+0.2 H+0.2 W1 A+0.3 S Min. 5 Rated DC Voltage
Code (0.008)
-0.1
L±0.2
(0.008)
(0.008)
-0.1
±0.2
(0.008)
(0.012)
-0.2
6 Packaging:
(0.004) (0.004) (0.008) R=7" tape and reel, S=13" tape and reel
A 3216 1.6 (0.063) 3.2 (0.126) 1.6 (0.063) 1.2 (0.047) 0.8 (0.031) 1.1 (0.043) 7 Maximum ESR at 100kHz at 25°C in
B 3528 2.8 (0.110) 3.5 (0.138) 1.9 (0.075) 2.2 (0.087) 0.8 (0.031) 1.4 (0.055) milliohms (from matrix)
C 6032 3.2 (0.126) 6.0 (0.236) 2.6 (0.102) 2.2 (0.087) 1.3 (0.051) 2.9 (0.114) Standard Packaging
D 7343 4.3 (0.169) 7.3 (0.287) 2.9 (0.114) 2.4 (0.094) 1.3 (0.051) 4.4 (0.173)
TAPE & REEL
E 7343H 4.3 (0.169) 7.3 (0.287) 4.1 (0.162) 2.4 (0.094) 1.3 (0.051) 4.4 (0.173) 7" 13"
3.45 ±0.3 A 2,000 8,000
V 6.1 (0.240) 7.3 (0.287) 3.1 (0.122) 1.4 (0.055) 3.4 (0.134)
(0.136±0.012) B 2,000 8,000
W1 dimension applies to the termination width for A dimensional area only. C 500 3,000
D 500 2,500
E 400 1,500
V 400 1,500

Capacitance and Voltage Range (letter denotes case code)

Capacitance Rated Voltage (VR) at 85°C
µF Code 6.3V 10V 16V 20V 25V 35V
1.5 155 A(3000) B(3000)
2.2 225 A(3500) A(3000) B(2500) B(2000)
3.3 335 A(3500) A(2500) B(2000) C(700)
4.7 475 A(2500) A(2000) A(1800) B(1500) C(600)
6.8 685 A(1800) A(1800) B(1200) C(700) C(700) D(500)
10 106 A(1500) A(1800) B(800) B(1000) C(500) D(300)
C(700)
15 156 A(1500) A(1000) B(800) C(450) D(300) C(450)
D(300)
A(1000) C(400) D(400)
22 226 B(600) B(700) C(375) D(300) D(200) E(200-300)
33 336 B(600) C(375-500) C(300) D(200) E(175-300) D(300)
47 476 B(500) C(350) C(350) D(200) D(250)
C(300) D(150-200) E(150)
B(500)
68 686 C(200) D(150) D(150) E(125-170) V(95-300)
C(100-200) D(125-150) D(175)
100 107 C(150) D(65-140) E(100-150) V(85-200)
C(150) D(150)
150 157 D(125) D(100) V(75)
D (100-150)
220 227 D(100) E(60-150) V(75-150)
V(60)
D(100) D(100-150)
330 337 E(100-150) E(60-100)
V(60-100) V(60-100)
D (100-200)
470 477 V(55-100) E(50-200)
E(50-200)
ESR limits quoted in brackets are in milliohms Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #071. Visit our website http://www.avxcorp.com

71
Surface Mount Tantalum Capacitors
THJ - High Temperature Series
HOW TO ORDER
W L W THJ B 156 M 006 R
1 2 3 4 5 6
H 1 Series Name
2 Case Size
W1 A S A W1 3 Capacitance Code
4 Capacitance Tolerance:
K=10%, M=±20%
Mechanical Specifications 5 Voltage:
Case Size Dimensions 004 = 4V 006 = 6.3V 010 = 10V
016 = 16V 020 = 20V 025 = 25V
AVX EIA L W H A+0.3 S W1 ±0.2 035 = 35V
±0.2 +0.2/-0.1 +0.2/-0.1 -0.2 min.
6 Packaging:
A 3216 3.2 1.6 1.6 0.8 1.1 1.2
X = 4 1/4" reel
(0.126) (0.063) (0.063) (0.031) (0.043) (0.047)
R = 7" reel
B 3528 3.5 2.8 1.9 0.8 1.4 2.2
S = 13" reel
(0.138) (0.110) (0.075) (0.031) (0.055) (0.087)
C 6032 6.0 3.2 2.6 1.3 2.9 2.2 MARKING
(0.236) (0.126) (0.102) (0.051) (0.114) (0.087) 1. Voltage Code J for 6.3V
D 7343 7.3 4.3 2.9 1.3 4.4 2.4 J15µ
2. Capacitance in µF
(0.287) (0.169) (0.114) (0.051) (0.173) (0.094) 9901
3. Date Code
Polarity

Range Offering
Capacitance Rated Voltage (VR) at 85°C
µF 4V 6.3V 10V 16V 20V 25V 35V
0.10 A
0.15 A
0.22 A
0.33 A
0.47 A B
0.68 A B
1.0 A B
1.5 A C
2.2 A B C
3.3 A B C
4.7 A B C
6.8 B C D
10 B C D
15 B C D
22 B C D
33 C D
47 C D
68 C D
10.0 D
15.0 D
22.0

Technical Specifications
Rated Voltage DC (VR) @ ≤ +85°C: 6.3 10 16 20 25 35
Category Voltage DC (VC) @ +150°C: 3.2 5 8 10 12.5 17.5
Surge Voltage (VS) @ ≤ +85°C: 8.2 13 20.8 26 32.5 45.5
Surge Voltage (VS) @ +150°C: 4.1 6.5 15.4 13 16.2 22.7
Temperature Range: -55°C to +150°C

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #072. Visit our website http://www.avxcorp.com

72
Surface Mount Tantalum Capacitors
CWR09 Style (MIL-PRF-55365/4)
Marking (military qualified) HOW TO ORDER
CWR09 J B 225 J M A \TR
The “V” following rated voltage is replaced 1 2 3 4 56 7 8
with a “J” for JAN Brand. 1 Style
2 Voltage:
C=4VDC, D=6VDC, F=10VDC, H=15VDC, J=20VDC,
Polarity Stripe (+) K=25VDC, M=35VDC, N=50VDC
3 Termination Finish:
B=Gold Plated, C=Hot Solder Dipped,
K=Solder Fused
4 Capacitance Code
685 Capacitance Code 5 Tolerance:
J=±5%, K=±10%, M=±20%
6 Failure Rate: Exponential: M=1%/1000 hours
20J Rated Voltage
"J" for "JAN" Brand
P=0.1%/1000 hours
R=0.01%/1000 hours
S=0.001%/1000 hours
Weibull: B=0.1%/1000 hours
C=0.01%/1000 hours
Standard Packaging 7 Optional Surge Current:
A=10 cycles at 25°C
CASE TAPE & REEL WAFFLE B=10 cycles at -55°C and +85°C
SIZE 7" 13"
A 2,500 9,000 160
8 Packaging:
B 2,500 9,000 112
Bulk (Standard if nothing is specified in this position)
\TR=7" Tape & Reel
C 2,500 9,000 90
\TR13=13" Tape & Reel
D 2,500 8,000 88
\W=Waffle Pack
E 2,500 8,000 60
F 1,000 3,000 48
G 500 2,500 50
H 500 2,500 28

Range Series
Capacitance and Voltage Range (letter denotes case code)
Capacitance Rated Voltage DC (VR) at 85°C
µF Code 4V 6V 10V 15V 20V 25V 35V 50V
0.1 104 A
0.15 154 A
0.22 224 A B
0.33 334 A B
0.47 474 A B C
0.68 684 A B B C D
1.0 105 A B C D E
1.5 155 A B C D E F
2.2 225 A B C D E F
3.3 335 B C D E F G
4.7 475 B C D E F G H
6.8 685 C D E F G H
10 106 D E F G
15 156 E F G H
22 226 F G H
33 336 F G H
47 476 G H
68 686 G H
100 107 H
Note: CWR09 is fully interchangeable with CWR06. Case sizes correspond to TAZ A through H.
Contact AVX for latest qualification status.
Note: “C” case size has limited availability. Where possible use “D” case size.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #073. Visit our website http://www.avxcorp.com

73
Surface Mount Tantalum Capacitors
CWR11 Style (MIL-PRF-55365/8)
MIL-PRF-55365/8 Marking (CWR11 style) HOW TO ORDER
Polarity Stripe CWR11 J B 225 K M A \TR
J "J" for "JAN" Brand 1
1 Style
2 3 4 5 6 7 8

2 Voltage: C=4VDC, D=6VDC, F=10VDC, H=15VDC,

J=20VDC, K=25VDC, M=35VDC, N=50VDC
335 Capacitance code 3 Termination Finish: B=Gold Plated
C=Hot Solder Dipped, K=Solder Fused
4 Capacitance Code
25A Rated Voltage
(with manufacturer's ID)
5 Tolerance: J=±5%, K=±10%, M=±20%
6 Failure Rate: Exponential: M=1%/1000 hours
P=0.1%/1000 hours
R=0.01%/1000 hours
S=0.001%/1000 hours
Weibull: B=0.1%/1000 hours
Standard Packaging C=0.01%/1000 hours
Case Size Tape width 180mm (7") reel 330mm (13") reel 7 Optional Surge Current:
reference mm Qty. Qty. A=10 cycles at 25°C
A 8 2,000 8000 B=10 cycles at -55°C and +85°C
B 8 2,000 8000
C 12 500 3000
8 Packaging:
Bulk (Standard if nothing is specified in this position)
D 12 500 2500
\TR=7" Tape & Reel
\TR13=13" Tape & Reel
\W=Waffle Pack
Dimensions: millimeters (inches)
Case H2 P W2
Code H (min) L .3 (±0.012) W .1 (±0.004)
1.6±.2 0.7 3.2±.2 0.8 1.6±.2 1.2
A (0.063±0.008) (0.028) (0.126±0.008) (0.031) (0.063±0.008) (0.047)
1.9±.2 0.7 3.5±.2 0.8 2.8±.2 2.2
B (0.075±0.008) (0.028) (0.138±.0008) (0.031) (0.110±0.008) (0.087)
2.5±.3 1.0 6.0±.3 1.3 3.2±.3 2.2
C (0.098±0.012) (0.039) (0.236±0.012) (0.051) (0.126±0.012) (0.087)
2.8±.3 1.0 7.3±.3 1.3 4.3±.3 2.4
D (0.110±0.012) (0.039) (0.287±.0012) (0.051) (0.169±0.012) (0.094)

Range Series
Capacitance and Voltage Range (letter denotes case code)
Capacitance Rated Voltage DC (VR) at 85°C
µF Code 6V 10V 15V 20V 25V 35V 50V
0.10 104 A A
0.15 154 A B
0.22 224 A B
0.33 334 A A B
0.47 474 A A B C
0.68 684 A A B B C
1.0 105 A A A B B C
1.5 155 A A A B B C D
2.2 225 A A B B C C D
3.3 335 A B B B C C
4.7 475 B B B C C D
6.8 685 B B C D
10 106 B C D
15 156 C C D
22 226 C D
33 336 D
47 476 D
68 686
Note: Contact AVX for latest qualification status.
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #074. Visit our website http://www.avxcorp.com

74
Dipped Radial Tantalum Capacitors
TAP Series
D
HOW TO ORDER
TAP 475 M 035 SCS
i 1 2 3 4 5
i
1 AVX Type
2 Capacitance Code
H
3 Capacitance Tolerance:
K=±10%, M=±20%,
Dimensions: mm (inches) Standard Packaging For J=±5% tolerance, please consult factory
CASE
A
H *H1 D
8.5 (0.33) 7.0 (0.28) 4.5 (0.18)
CASE BULK T/R 14" AMMO
A 1000 1500 3000
4 Rated DC Voltage
B 9.0 (0.35) 7.5 (0.30) 4.5 (0.18) B 1000 1250 3000 5 Suffix indicating
C 10.0 (0.39) 8.5 (0.33) 5.0 (0.20) C 1000 1250 3000 wire form and packaging:
D 10.5 (0.41) 9.0 (0.35) 5.0 (0.20) D 1000 1250 3000
E 10.5 (0.41) 9.0 (0.35) 5.5 (0.22) E 1000 1000 2500 Figure 1 D Figure 2 D Figure 3
D
F 11.5 (0.45) 10.0 (0.39) 6.0 (0.24) F 1000 1000 2500
G 11.5 (0.45) 10.0 (0.39) 6.5 (0.26) G 1000 750 2500 H 0.08 (2.0)
H 1 +0.16 (4) H1
H 12.0 (0.47) 10.5 (0.41) 7.0 (0.28) H 1000 750 2000 +
max max
+
J 13.0 (0.51) 8.0 (0.31) J 500 750 2000
K 14.0 (0.55) 8.5 (0.33) K 500 500 1000 L L
L 14.0 (0.55) 9.0 (0.35) L 500 500 1000 S
S
L
S
M 14.5 (0.57) 9.0 (0.35) M 100 500 1000 d 0.079 (2) d 0.079 (2)
N 16.0 (0.63) 9.0 (0.35) N 100 500 1000 Wire Form C min Wire Form B d Wire Form S min

P 17.0 (0.67) 10.0 (0.39) P 100 500 1000

Packaging
R 18.5 (0.73) 10.0 (0.39) R 100 500 1000 Wire Figure Case L S d Suffixes
Form Size (see note 1)
*H1 refers to H dimension on S wire form. Available
CCS Bulk
Marking C Figure 1 16±4
A - R* 5.0±1.0 0.5±0.05 CRW
(0.630±0.160) (0.200±0.040) (0.020±0.002)
Tape/Reel
Capacitance, DC voltage, polarity and an “A” are laser marked on CRS Tape/AMMO
the capacitor body. 16±4 5.0±1.0 0.5±0.05 BRW Tape/Reel
B Figure 2 A - H
• Polarity • Voltage (0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/AMMO
• Capacitance • AVX logo SCS Bulk
• ±10% tolerance coded with “K” on reverse side of unit. S Figure 3 A - H* 16±4 2.5±0.5 0.5±0.05 SRW Tape/Reel
(0.630±0.160) (0.100±0.020) (0.020±0.002)
SRS Tape/AMMO
Note 1: Consult factory for other special wire forms.
Capacitance Range (letter denotes case code)
Capacitance Rated Voltage DC (VR)
µF 6.3V 10V 16V 20V 25V 35V 50V
0.1 A A
0.15 A A
0.22 A A
0.33 A A
0.47 A A
0.68 A B
1.0 A A A C
1.5 A A A A D
2.2 A A A A B E
3.3 A A A B B C F
4.7 A A B C C E G
6.8 A B C D D F H
10 B C D E E F J
15 C D E F F H K
22 D E F H H K L
33 E F F J J M
47 F G J K M N
68 G H L N N
100 H K N N
150 K N N
220 M P R
330 P R
Values outside this standard range may be available on request without appropriate release or qualification.
AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #075. Visit our website http://www.avxcorp.com

75
Molded Axial Capacitors
TAR Series
HOW TO ORDER
TAR R 335 M 015
D1 25 (1) L
min. 1 2 3 4 5
1 Type
2 Case Code
d 3 Capacitance Code
4 Capacitance Tolerance:
Polarity mark
J=±5%, K=±10%, M=±20%
5 Rated DC Voltage

Dimensions: millimeters (inches)

Case L D1 d Typical
Size ±0.25 (0.010) ±0.25 (0.010) ±0.05 (0.020) Weight g
Q 6.35 (0.250) 2.16 (0.085) 0.5 (0.020) 0.20
R 7.4 (0.291) 2.5 (0.098) 0.5 (0.020) 0.25
S 8.6 (0.339) 4.3 (0.169) 0.5 (0.020) 0.52
W 10.4 (0.409) 4.3 (0.169) 0.5 (0.020) 0.53

Marking Standard Packaging

• Polarity • Capacitance • Date Code
• Tolerance • Voltage TAPE & REEL AMMO
14"
Q 3,000 3,000
R 3,000 3,000
S 2,000 2,000
W 2,000 2,000

Capacitance Range (letter denotes case code)

Capacitance Rated Voltage DC (VR)
µF 4V 6.3V 10V 15V 20V 25V 35V 50V
0.1 Q Q
0.15 Q Q
0.22 Q Q
0.33 Q R
0.47 Q Q R
0.68 Q R R
1.0 Q Q R R
1.5 Q Q R R S
2.2 Q Q R R S S
3.3 Q Q R R R S W
4.7 Q Q R R R S S W
6.8 Q R R R S S W
10 R R R S S S W
15 R R S S W W
22 R S S W W
33 S S W W
47 S W W
68 W W
Values outside this standard range may be available on request without appropriate release or qualification.
AVX reserves the right to supply capacitors to a tighter specification than that ordered.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #076. Visit our website http://www.avxcorp.com

76
Hermetic Axial Capacitors
TAA Series
HOW TO ORDER
TAA A 105 M 035 G
L2 Polarity Mark 1 2 3 4 5 6
d
1 Type
+ 2 Case Code
3 Capacitance Code
LL L1 LL D 4 Capacitance Tolerance:
J=±5%, K=±10%, M=±20%
5 Rated DC Voltage
Standard Packaging 6 TAA Packaging Suffixes:
G=Taped & Reeled
TAPE & REEL AMMO W=AMMO Pack
14"
A 3,500 1,500
B 2,500 1,000
C 500 250
D 400 250

Dimensions: millimeters (inches)

Case L1 L2 D Lead Length (LL) d Weight
Size max. max. max. min. nom. max. g
A 7.2 (0.283) 10.7 (0.421) 3.6 (0.142) 28 (1.102) 0.5 0.7
B 12.0 (0.472) 15.5 (0.610) 4.8 (0.189) 28 (1.102) 0.5 1.3
C 17.3 (0.681) 20.9 (0.823) 7.4 (0.291) 23 (0.906) 0.6 4.7
D 19.9 (0.783) 23.4 (0.921) 9.0 (0.354) 23 (0.906) 0.6 7.4
Note: The tabulated dimensions are for non-insulated capacitors. Insulated capacitors are standard, dimension L1 will increase by 0.8mm maximum, and dimen-
sion D by 0.2mm maximum.

Capacitance Range (letter denotes case code)

Capacitance Cap Rated Voltage DC
µF Code 6.3V 10V 16V 20V 25V 35V 40V 50V
0.1 104 A A A
0.15 154 A A A
0.22 224 A A A
0.33 334 A A A
0.47 474 A A A
0.68 684 A A A
1.0 105 A A A
1.5 155 A A B B B
2.2 225 A B B B
3.3 335 A B B B
4.7 475 A B B B B
6.8 685 A B B B C
10 106 B B B C C C
15 156 B B C C C
22 226 B C C C D
33 336 B C C C D D
47 476 B C C D D
68 686 C C D D
100 107 C D D
150 157 C D D
220 227 D D
330 337 D

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #077. Visit our website http://www.avxcorp.com

77
Minitan Capacitors
TMH Series
Figure 1 HOW TO ORDER
TMH W 104 M 020 R*
1 2 3 4 5 6
1 Type
C B 2 Case Code
3 Capacitance Code
A 4 Tolerance:
L=+40/-20%, M=±20%,
K=±10%, J=±5%
E 5 Rated DC Voltage
Radial Axial 6 Lead Configuration:
R=Radial, A=Axial
*Note: Other digits will be added by
Case Sizes factory to identify specific
X, W, U customer requirements. Contact
factory for details.
Leads – Leads are solder coated pure nickel wire suitable for soldering or welding.
Tested in accordance with MIL-STD-202, Method 211, .010 diameter leads
withstand a 1-lb. pull and .007 diameter leads an 8-oz. pull. All lead diameters
withstand 5 rotations twist.
Standard Packaging
Bulk (100 pcs.)

Dimensions: millimeters (inches)

Case Size Applicable Figure A Max B Max C Max E
X Figure 1 1.9 (0.075) 1.3 (0.051) 1.1 (0.043) 0.8±0.4 (0.031±0.016)
W Figure 1 2.5 (0.098) 1.3 (0.051) 1.1 (0.043) 0.8±0.4 (0.031±0.016)
U Figure 1 3.2 (0.126) 1.8 (0.071) 1.1 (0.043) 1.3±0.4 (0.051±0.016)
Lead Length: All case sizes: Pos. 41.3±3.2 (1.625±0.125) Lead Diameter: W, X = .178±.025 (0.007±0.001);
Neg. 34.9±3.2 (1.375±0.125) U = .254±.025 (0.010±0.001)

Maximum Capacitance, µF
Case Size 2VDC 3VDC 4VDC 6VDC 10VDC 15VDC 20VDC 35VDC 50VDC
X 2.2 — 0.33 0.22 0.15 0.1 0.068 — —
W 2.2 — 0.33 0.22 0.15 0.1 0.068 — —
U 10.0 4.7 1.0 — — — 0.22 — —

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #078. Visit our website http://www.avxcorp.com

78
Film Chip Capacitors
7) HOW TO ORDER
00
(0. CF 04 2 D 0334 J - -
± 0.2
0. 01
2) W 1 2 3 4 5 6 7
0.3( 1 Type
2 Size Code:
1 = 1206; 02 = 1210; 03 = 1812; 04 = 2220;
H 05 = 2824; 16 = 4030; 17 = 5040; 18 = 6054
3 Dielectric Class: 2 = PET
4 Voltage Code
50/63 V = D; 100 V = E; 160 V = F; 250 V = G
5 Capacitance EIA Code
1st digit: 0 (zero). 2nd & 3rd: 2nd significant
L figures of the capacitance value. 4th digit:
number of zeros to be added to the capaci-
tance value.
6 Tolerance Code: J = 5%; K = 10%
7 Suffix
- - = Bulk
BA = Taped on reel ø 180
Dimensions: millimeters (inches) BC = Taped on reel ø 330
Size Code 01 02 03 04 05 16 17 18
Equivalent
Size 1206 1210 1812 2220 2824 4030 5040 6054
Length (L) mm 3.2 ± 0.3 3.2 ± 0.3 4.5 ± 0.5 5.7 ± 0.5 7.1 ± 0.5 10.2 ± 0.6 12.7 ± 0.6 15.2 ± 0.6
(inches) (0.126 ±0.012) (0.126 ± 0.012) (0.177 ± 0.020) (0.224 ± 0.020) (0.280 ± 0.020) (0.401 ± 0.024) (0.500 ± 0.024) (0.598 ± 0.024)
Width (W) mm 1.6 ± 0.3 2.5 ± 0.3 3.2 ± 0.5 5.0 ± 0.5 6.1 ± 0.5 7.6 ± 0.8 10.2 ± 0.8 13.7 ± 0.8
(inches) (0.063 ± 0.012) (0.098 ± 0.012) (0.126 ± 0.020) (0.197 ± 0.020) (0.240 ± 0.020) (0.299 ± 0.031) (0.401 ± 0.031) (0.539 ± 0.031)

Capacitance and Voltage Range: Case Sizes 1206 and 1210 millimeters (inches)
DC Rated Voltage (105°C / 125°C)
Capacitance Capacitance 25 V / 19 V 50 V / 38 V 100 V / 75 V
Code Size Code H max Size Code H max Size Code H max
1 nF 0102 01 1.1 (0.043) 01 1.1 (0.043) 01 1.1 (0.043)
1.5 0152 01 1.1 (0.043) 01 1.1 (0.043) 01 1.1 (0.043)
2.2 0222 01 1.1 (0.043) 01 1.1 (0.043) 01 1.1 (0.043)
3.3 0332 01 1.1 (0.043) 01 1.1 (0.043) 01 1.1 (0.043)
4.7 0472 01 1.1 (0.043) 01 1.1 (0.043) 01 1.3 (0.051)
6.8 0682 01 1.1 (0.043) 01 1.1 (0.043) 02 1.6 (0.063)
10 0103 01 1.3 (0.051) 01 1.3 (0.051) 02 1.6 (0.063)
15 0153 01 1.3 (0.051) 02 1.8 (0.071) 02 1.8 (0.071)
22 0223 01 1.3 (0.051) 02 2.2 (0.087) 02 2.2 (0.087)
33 0333 02 2.2 (0.087) 02 2.2 (0.087)
47 0473 02 1.8 (0.071) 1.8 (0.071)
68 0683 02 2.2 (0.087)
100 0104 02 2.2 (0.087)

Capacitance and Voltage Range: Case Sizes 1812 to 6054 millimeters (inches)
DC Rated Voltage (105°C / 125°C)
Capacitance Capacitance 63 V / 47 V 100 V / 75 V 160 V / 120 V 250 V / 187 V
Code Size Code H max Size Code H max Size Code H max Size Code H max
1 nF 0102 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
1.5 0152 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
2.2 0222 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
3.3 0332 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
4.7 0472 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
6.8 0682 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
10 0103 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059)
15 0153 03 1.5 (0.059) 03 1.5 (0.059) 03 1.5 (0.059) 03 2.5 (0.098)
22 0223 03 1.5 (0.059) 03 1.5 (0.059) 03 2.0 (0.079) 04 2.0 (0.079)
33 0333 03 1.5 (0.059) 03 1.5 (0.059) 03 2.5 (0.098) 04 2.0 (0.079)
47 0473 03 2.0 (0.079) 03 2.0 (0.079) 04 2.1 (0.083) 04 3.0 (0.118)
68 0683 03 2.0 (0.079) 03 3.0 (0.118) 04 3.0 (0.118) 04 4.0 (0.157)
100 0104 03 2.0 (0.079) 03 3.0 (0.118) 04 3.4 (0.134) 05 3.6 (0.142)
150 0154 03 2.5 (0.098) 04 3.0 (0.118) 05 5.1 (0.201) 05 5.1 (0.201)
220 0224 03 3.0 (0.118) 04 4.5 (0.177) 05 5.0 (0.197) 16 3.8 (0.150)
330 0334 04 3.4 (0.134) 04 4.5 (0.177) 16 3.8 (0.150) 16 5.8 (0.228)
470 0474 04 4.0 (0.157) 05 5.4 (0.213) 17 3.8 (0.150) 17 4.6 (0.181)
680 0684 04 4.5 (0.177) 05 5.1 (0.201) 17 4.6 (0.181) 18 4.4 (0.173)
1 µF 0105 05 5.0 (0.197) 16 4.8 (0.189) 18 4.4 (0.173) 18 5.7 (0.224)
1.5 0155 17 4.6 (0.181) 17 4.6 (0.181) 18 6.2 (0.244)
2.2 0225 17 5.5 (0.217) 17 5.5 (0.217)
3.3 0335 18 6.2 (0.244) 18 6.2 (0.244)
4.7 0475 18 7.0 (0.276) 18 7.0 (0.276)
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #079. Visit our website http://www.avxcorp.com

79
Metallized Polyester
BF-Film Dielectric Capacitors
Schoop HOW TO ORDER
Metallized film BF 01 4 D 0104 K --
1 2 3 4 5 6
e
1 Type and Size: *
BF (CPM-83): Std.
L BH (CPM-N): High Performance
2 Dielectric Class: 4 = PET
0.4 (0.016). min

3 Voltage
H
4 Capacitance Value
5 Tolerance
6 Suffix
± 0.5 (0.020)
4.1 (0.161)

*STANDARDIZATION
+0.6 (0.024)
5.08 (0.020) -0.1 (0.004) BF (CPM-83): BH (CPM-N):
Generic specifications: Generic specifications:
Dimensions: millimeters (inches) CEI 384-1/CECC 30000/UTE 83100 CEI 384-1/CECC 30000/UTE 83100
Sectional specifications: Sectional specifications:
Case L max. H max. e max. ø ± 0.02 Observations
CEI 384-2/CECC 30400/UTE 83151 CEI 384-2/CECC 30400/UTE 83151
01 7.5 (0.295) 6.5 (0.256) 2.5 (0.098) 0.5 (0.020) 1nF ≤ CR ≤ 220nF Complies with special specification: On the LNZ list:
CECC 30401-063 Complies with type CPM-N
02 7.5 (0.295) 8.0 (0.315) 3.2 (0.126) 0.5 (0.020) 12nF ≤ CR ≤ 330nF
On the LNZ list: RAQ2 production,
05 7.5 (0.295) 12.0 (0.472) 6.0 (0.236) 0.5 (0.020) 560nF ≤ CR ≤ 2.2µF Complies with type CPM-N equivalent AQAP-4 of NATO
06 7.5 (0.295) 9.6 (0.378) 6.0 (0.236) 0.5 (0.020) 47nF / 400V
RAQ2 production, Climate Category:
equivalent AQAP-4 of NATO -55/125/56
07 7.5 (0.295) 8.0 (0.315) 5.0 (0.197) 0.5 (0.020) 27nF ≤ CR ≤ 1µF Climate Category:
-55/100/56

BF 01/02/05/06/07 BH 01/02/05/06/07
Capacitance Values (CR) and Capacitance Values (CR) and
Nominal Voltages (VR) vs Case Size Nominal Voltages (VR) vs Case Size
Capacitance BF Capacitance BH
Range VR-/VR~ Range VR-/VR~
(CR) 63/40 100/63 250/160 400/200 (CR) 63/40 100/63 250/160 400/200
1,000 pF BF01 BF01 BF01 BF01 1,000 pF BH01 BH01 BH01 BH01
1,200 BF01 BF01 BF01 BF01 1,200 BH01 BH01 BH01 BH01
1,500 BF01 BF01 BF01 BF01 1,500 BH01 BH01 BH01 BH01
1,800 BF01 BF01 BF01 BF01 1,800 BH01 BH01 BH01 BH01
2,200 pF BF01 BF01 BF01 BF01 2,200 pF BH01 BH01 BH01 BH01
2,700 BF01 BF01 BF01 BF01 2,700 BH01 BH01 BH01 BH01
3,300 BF01 BF01 BF01 BF01 3,300 BH01 BH01 BH01 BH01
3,900 BF01 BF01 BF01 BF01 3,900 BH01 BH01 BH01 BH01
4,700 pF BF01 BF01 BF01 BF01 4,700 pF BH01 BH01 BH01 BH01
5,600 BF01 BF01 BF01 BF01 5,600 BH01 BH01 BH01 BH02
6,800 BF01 BF01 BF01 BF01 6,800 BH01 BH01 BH01 BH02
8,200 BF01 BF01 BF01 BF01 8,200 BH01 BH01 BH01 BH07
10,000 pF BF01 BF01 BF01 BF01 10,000 pF BH01 BH01 BH01 BH07
12,000 BF01 BF01 BF01 BF02 12,000 BH01 BH01 BH01 BH07
15,000 BF01 BF01 BF01 BF02 15,000 BH01 BH01 BH01 BH07
18,000 BF01 BF01 BF01 BF02 18,000 BH01 BH01 BH01/BH02* BH06/BH05*
22,000 BF01 BF01 BF01 BF02 22,000 BH01 BH01 BH02 BH06/BH05*
27,000 BF01 BF01 BF01 BF07 27,000 BH01 BH01 BH02 BH06/BH05*
33,000 BF01 BF01 BF02 BF07 33,000 BH01 BH01 BH02 BH06/BH05*
39,000 BF01 BF01 BF02 BF07 39,000 BH01 BH01 BH07 BH05
47,000 pF BF01 BF01 BF02 BF06 47,000 pF BH01 BH01 BH07 BH05
56,000 BF01 BF01 BF07 56,000 BH01 BH01 BH07
68,000 BF01 BF01 BF07 68,000 BH01 BH01 BH07
82,000 BF01 BF01 BF07 82,000 BH01 BH01 BH06/BH05*
100 nF BF01 BF01 BF07 100 nF BH01 BH01 BH06/BH05*
120 BF01 BF01 120 BH01 BH01/BH07* BH05
150 BF01 BF01 150 BH01 BH01/BH07* BH05
180 BF01 BF07 180 BH01 BH02/BH07*
220 nF BF01 BF07 220 nF BH01/BH02* BH02/BH07*
270 BF02 BF07 270 BH02 BH07
330 BF02 BF07 330 BH02 BH07
390 BF07/BF02* BF07 390 BH07 BH07/BH05*
470 nF BF07/BF02* BF07 470 nF BH07 BH05
560 BF07 BF05 560 BH07 BH05
680 BF07 BF05 680 BH07/BH06* BH05
820 BF07 BF05 820 BH07/BH06* BH05
1 µF BF07 BF05 1 µF BH07/BH06* BH05
1.5 µF BF05 1.5 µF BH05
2.2 µF BF05** 2.2 µF BH05**
* Upon request ** Upon request & only available 50 V (VR) ** (VR = 50 V) * Upon request

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #080. Visit our website http://www.avxcorp.com

80
Metallized Polyester
BT-Film Dielectric Capacitors
BT 07/10/15/22/27
CPM-85 — 7.5/10/15/22.5/27.5 Radial Leads
63/100/160/250/400/630 V- HOW TO ORDER
BT 10 4 G 0104 K --
Schoop 1 2 3 4 5 6
Metallized film 1 Type and Size
2 Dielectric Class: 4 = PET
3 Voltage
e
4 Capacitance Value
L
5 Tolerance
6 Suffix
0.4 (0.016). min

Tape and Reel

H STANDARDIZATION
Generic specifications:
CEI 384-1/CECC 30000/UTE 83100
Sectional specifications:
+ 0 (0.000)
6 (0.236) – 1 (0.039)

LS CEI 384-2/CECC 30400/UTE 83151

On the LNZ list:
Complies with type CPM85 – CPM-R

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
S C DIMENSIONS: Range of Capacitance (CR min. ... max.)
i a millimeters (inches) BT
z s Max Max Max Ø LS VR-/VR~
e e +10%
L H e -0.05 ±0.4 63/40 100/63 160/80 250/160 400/200 630/220
9.25 8.0 3.25 0.6
1 68 nF ... 220 nF 22 nF ... 150 nF – 6.8 nF ... 47 nF 1 nF ... 22 nF 1 nF ... 3.3 nF
(0.364) (0.315) (0.128) (0.024)
10.1 10.0 5.0 0.6
2 330 nF/470 nF 220 nF/330 nF – 68 nF ... 100 nF – 4.7 nF/6.8 nF
(0.398) (0.394) (0.197) (0.024) 7.5
07 10.1 11.0 5.0 0.6 (0.295)
C 680 nF – – – – 10 nF
(0.398) (0.433) (0.197) (0.024)
10.1 12.0 6.0 0.6
D 1µF – – 150 nF 33 nF ... 47 nF 15 nF
(0.398) (0.472) (0.236) (0.024)
12.5 9.0 4.0 0.6
EO 220 nF ... 470 nF 100 nF ... 220 nF 100 nF ... 220 nF 33 nF ... 100 nF 6.8 nF ... 33 nF –
(0.492) (0.354) (0.157) (0.024) 10.0
10 12.5 10.0 5.0 0.6 (0.394)
4 – – – – 47 nF 4.7 nF/22 nF
(0.492) (0.394) (0.197) (0.024)
17.5 10.5 5.0 0.8
6 680 nF ... 1 µF 150 nF ... 1 µF 330 nF/470 nF 68 nF ... 220 nF 47 nF/68 nF 33 nF
(0.689) (0.413) (0.197) (0.031)
17.5 13.5 5.0 0.8
7 – – – – 100 nF –
(0.689) (0.531) (0.197) (0.031)
17.5 12.0 6.0 0.8 15.0
15 IO 2.2 µF – 680 nF 330 nF – –
(0.689) (0.472) (0.236) (0.031) (0.591)
17.5 13.5 6.25 0.8
8 – – 1 µF 390 nF 150 nF 47 nF
(0.689) (0.531) (0.246) (0.031)
17.5 14.5 8.5 0.8
9 – – 2.2 µF – – 68 nF
(0.689) (0.571) (0.335) (0.031)
26.25 15.0 7.5 0.8
11 – 1.5 µF – 470 nF/680 nF 220 nF 100 nF
(1.033) (0.591) (0.295) (0.031)
26.25 17.5 7.5 0.8 22.5
22 12 3.3 µF 2.2 µF – – 330 nF 150 nF
(1.033) (0.689) (0.295) (0.031) (0.886)
26.25 19.5 10.0 0.8
13 4.7 µF/6.8 µF 3.3 µF – 1 µF/1.5 µF 470 nF 220 nF
(1.033) (0.768) (0.394) (0.031)
31.25 19.5 10.0 0.8
16 6.8 µF 4.7 µF 3.3 µF 1.5 µF 470 nF 680 nF 330 nF
(1.230) (0.768) (0.394) (0.031)
31.25 22.5 12.5 0.8
17* 10 µF 6.8 µF – 2.2 µF 1 µF 470 nF
(1.230) (0.886) (0.492) (0.031) 27.5
27 31.25 26.0 15.0 0.8 (1.083)
18* 15 µF 10 µF – 3.3 µF 1.5 µF 680 nF
(1.230) (1.024) (0.591) (0.031)
31.25 30.0 17.5 0.8
19* 22 µF – – 4.7 µF 2.2 µF 1 µF
(1.230) (1.181) (0.689) (0.031)
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #081. Visit our website http://www.avxcorp.com

81
Metallized Polyester
BG-Film Dielectric Capacitors
BG 07/10/15/22/27 HOW TO ORDER
CPM-85 – 7.5/10/15/22.5/27.5 BG 10 4 G 0104 K --
Boxed Metallized Polyester Capacitor 1 2 3 4 5 6
e L
1 Type: Pitch 10mm = 10
Pitch 15mm = 15
Pitch 22.5mm = 22
H Pitch 27.5mm = 27
Max
2 Dielectric Class: 4 = PET
3 Voltage
6 (0.24)
LS ±0.4
4 Capacitance Value
d (0.016) 5 Tolerance
6 Suffix
millimeters (inches)
Lead Spacing (LS) Diameter d STANDARDIZATION
Generic specifications:
7.5 (0.295) 0.6 (0.024) CEI 384-1/CECC 30000/UTE 83100
10 (0.394) 0.6(1) (0.024) / 0.8 (0.031) Sectional specifications:
> 10 (0.394) 0.8 (0.031) CEI 384-2/CECC 30400/UTE 83151
On the LNZ list:
(1): 0.6 (0.024) for capacitors with e ≤ 6 (0.024) Complies with type CPM85 – CPM-R

Dimensions: millimeters (inches)

63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC
Capacitance
e H L LS e H L LS e H L LS
0.01 µF
0.01 µF 2.5 (0.098) 7.5 (0.295) 10.0 (0.394) 7.5 (0.295)
0.015 µF
0.015 µF 2.5 (0.098) 7.5 (0.295) 10.0 (0.394) 7.5 (0.295)
0.022 µF
0.022 µF 2.5 (0.098) 7.0 (0.276) 10.0 (0.394) 7.5 (0.295) 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295)
0.033 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295)
0.033 µF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
0.047 µF
0.047 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295)
0.047 µF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 9.0 (0.354) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
0.068 µF
0.068 µF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.068 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
0.1 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.1 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
0.1 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.15 µF 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
0.15 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
0.15 µF 2.5 (0.098) 7.0 (0.276) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.22 µF
0.22 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295) 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394)
0.22 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.33 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.33 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394)
0.33 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.47 µF 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
0.47 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295) 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.47 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
0.68 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.68 µF 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591)
0.68 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
1 µF 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
1 µF 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591)
1 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
1.5 µF 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591) 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886)
1.5 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
2.2 µF 7.0 (0.276) 14.0 (0.551) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591) 10.5 (0.413) 19.5 (0.768) 25.5 (1.004) 22.5 (0.886)
2.2 µF 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
3.3 µF 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591) 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591)
3.3 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
4.7 µF 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591) 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886)
4.7 µF 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
6.8 µF 10.5 (0.413) 19.5 (0.768) 25.5 (1.004) 22.5 (0.886)
6.8 µF 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
10 µF 10.5 (0.413) 19.5 (0.768) 25.5 (1.004) 22.5 (0.886)
10 µF 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
15 µF 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
22 µF 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #082. Visit our website http://www.avxcorp.com

82
Metallized Polyester
Film Dielectric Capacitors
BG 07/10/15/22/27
CPM-85 – 7.5/10/15/22.5/27.5
Boxed Metallized Polyester Capacitor

e L

H
Max

6 (0.24)
LS ±0.4
d (0.016)

Dimensions: millimeters (inches)

400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC
Capacitance
e H L LS e H L LS e H L LS
1 nF 2.5 (0.098) 7.0 (0.276) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
1.5 nF
1.5 nF 2.5 (0.098) 7.0 (0.276) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
2.2 nF
2.2 nF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
3.3 nF
3.3 nF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
4.7 nF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295)
4.7 nF 2.5 (0.098) 7.0 (0.276) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394)
6.8 nF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295)
6.8 nF 3.0 (0.118) 8.6 (0.339) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394)
0.01 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.01 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.015 µF 4.0 (0.157) 9.0 (0.354) 10.0 (0.394) 7.5 (0.295) 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
0.015 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591)
0.022 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295)
0.022 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591)
0.033 µF 5.0 (0.197) 11.0 (0.433) 10.0 (0.394) 7.5 (0.295) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394)
0.033 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
0.047 µF 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
0.047 µF 4.0 (0.157) 9.0 (0.354) 13.0 (0.512) 10.0 (0.394) 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394)
0.047 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
0.068 µF 6.0 (0.236) 12.0 (0.472) 10.4 (0.409) 7.5 (0.295)
0.068 µF 5.0 (0.197) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 14.0 (0.551) 13.0 (0.512) 10.0 (0.394)
0.068 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
0.1 µF
0.1 µF 6.0 (0.236) 11.0 (0.433) 13.0 (0.512) 10.0 (0.394) 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591)
0.1 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 8.5 (0.335) 16.5 (0.650) 25.5 (1.004) 22.5 (0.886)
0.15 µF
0.15 µF 7.0 (0.276) 14.0 (0.551) 13.0 (0.512) 10.0 (0.394) 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591)
0.15 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
0.22 µF
0.22 µF 5.5 (0.216) 10.5 (0.413) 18.0 (0.709) 15.0 (0.591) 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591)
0.22 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
0.33 µF
0.33 µF 7.0 (0.276) 12.5 (0.492) 18.0 (0.709) 15.0 (0.591) 10.5 (0.413) 19.5 (0.768) 25.5 (1.004) 22.5 (0.886)
0.33 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
0.47 µF
0.47 µF 9.0 (0.354) 14.5 (0.571) 18.0 (0.709) 15.0 (0.591)
0.47 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886) 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
0.68 µF
0.68 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
0.68 µF 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
1 µF
1 µF 7.0 (0.276) 15.0 (0.591) 25.5 (1.004) 22.5 (0.886)
1 µF 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083) 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)
1.5 µF 10.5 (0.413) 19.5 (0.768) 25.5 (1.004) 22.5 (0.886)
1.5 µF 11.0 (0.433) 20.0 (0.787) 32.0 (1.260) 27.5 (1.083)
2.2 µF
2.2 µF 14.0 (0.551) 25.0 (0.984) 32.0 (1.260) 27.5 (1.083)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #083. Visit our website http://www.avxcorp.com

83
Metallized Polyester
BC/BD/BO-Film Dielectric Capacitors
Schoop BC/BD 15-250V HOW TO ORDER
STANDARDIZATION BC 15 4 G 0105 K --
Metallized film
Generic specifications: 1 2 3 4 5 6
CEI 384-1/CECC 30000/UTE 83100
Sectional specifications:
1 Type and Size: BC/BD/BO
2 Dielectric Class: 4 = PET
e

CEI 384-2/CECC 30400/UTE 83151

L 3 Voltage
BO 07/10/15/27
4 Capacitance Value
. min

CPM-50 — 7.5/10/15/27.5
5 Tolerance
0.4 (0.016)

40/63/160/250/400V
6 Suffix
H

STANDARDIZATION Tape and Reel

Generic specifications:
CEI 384-1/CECC 30000/UTE 83100
Sectional specifications:
+ 0 (0.000)
6 (0.236) – 1 (0.039)

LS CEI 384-2/CECC 30400/UTE 83151

On the LNZ 44-04 list:
Complies with type CPM50
On the GAM-T1 list:
ARIANE qualified
BC/BD 15
15 Radial Leads – 250V -
Nominal Voltage (VR) and Capacitance Values (CR)
Depending on the Dimensions millimeters (inches)
Type Case CR L h e LS Ø
(µF) max max max ±0.4 +10% -0.05
i0 0.47 17.5 (0.689) 12.0 (0.472) 6.0 (0.236) 15.0 (0.591) 0.8 (0.031)
8 0.68 17.5 (0.689) 13.5 (0.531) 6.25 (0.246) 15.0 (0.591) 0.8 (0.031)
9 0.80 17.5 (0.689) 14.5 (0.571) 8.5 (0.335) 15.0 (0.591) 0.8 (0.031)
BC 15 9 0.82 17.5 (0.689) 14.5 (0.571) 8.5 (0.335) 15.0 (0.591) 0.8 (0.031)
9 1.0 17.5 (0.689) 14.5 (0.571) 8.5 (0.335) 15.0 (0.591) 0.8 (0.031)
9 1.5 17.5 (0.689) 14.5 (0.571) 8.5 (0.335) 15.0 (0.591) 0.8 (0.031)
9 2.2 17.5 (0.689) 14.5 (0.571) 8.5 (0.335) 15.0 (0.591) 0.8 (0.031)
8 0.80 17.5 (0.689) 13.5 (0.531) 6.25 (0.246) 15.0 (0.591) 0.8 (0.031)
BD 15 8 0.82 17.5 (0.689) 13.5 (0.531) 6.25 (0.246) 15.0 (0.591) 0.8 (0.031)
8 1.0 17.5 (0.689) 13.5 (0.531) 6.25 (0.246) 15.0 (0.591) 0.8 (0.031)

BO 07/10/15/27
CPM-50 – 7.5/10/15/27.5 Radial Leads 40/63/160/250/400 V -
Nominal Voltage (VR) and Capacitance Values (CR)
Depending on the Dimensions
S C DIMENSIONS: Range of Capacitance (CR min. ... max.)
i a millimeters (inches)
BO
z s Ø
e e Max Max Max +10% LS VR-/VR~
L H e -0.05 ±0.4 40/25 63/40 160/100 250/180 400/200
07 10.1 10.0 5.0 0.6 7.5
2 (0.398) (0.394) (0.197) (0.024) (0.295) – – – 4.7 nF/8.2 nF 1 nF ... 3.3 nF
12.5 10.0 5.0 0.6 10.0
10 4 (0.492) (0.394) (0.197) (0.024) (0.394) 68 nF ... 220 nF 33 nF ... 100 nF 10 nF ... 47 nF 10 nF ... 22 nF 4.7 nF ... 10 nF
17.5 10.5 5.0 0.8
6 (0.689) (0.413) (0.197) (0.031) 330 nF/470 nF 150 nF/220 nF 68 nF ... 150 nF 33 nF/47 nF 15 nF/22 nF
17.5 13.5 5.0 0.8
7 (0.689) (0.531) (0.197) (0.031) 680 nF 330 nF 220 nF 68 nF 33 nF
17.5 13.5 6.25 0.8 15.0
15 8 (0.689) (0.531) (0.246) (0.031) (0.591) 1 µF 470 nF – 100 nF 47 nF
17.5 14.5 8.5 0.8
9 (0.689) (0.571) (0.335) (0.031) 1.5 µF 680 nF 330 nF 150 nF 68 nF
17.5 16.5 10.0 0.8
10 (0.689) (0.650) (0.394) (0.031) 2.2 µF 1 µF 470 nF 220 nF 100 nF
31.25 15.0 7.5 0.8
14 (1.230) (0.591) (0.295) (0.031) 3.3 µF 1.5 µF 680 nF/1 µF 330 nF 330 nF
31.25 17.5 8.75 0.8
15 (1.230) (0.689) (0.344) (0.031) 4.7 µF 2.2 µF 1.5 µF/2.2 µF 470 nF 220 nF
31.25 19.5 10.0 0.8
16 (1.230) (0.768) (0.394) (0.031) 27.5 6.8 µF 3.3 µF – 680 nF 330 nF
27 31.25 22.5 12.5 0.8 (1.083)
17* 10 µF 4.7 µF – 1 µF 470 nF
(1.230) (0.886) (0.492) (0.031)
31.25 26.0 15.0 0.8
18* (1.230) (1.024) (0.591) (0.031) 15 µF 6.8 µF 3.3 µF 1.5 µF 680 nF
31.25 30.0 17.5 0.8
19* (1.230) (1.181) (0.689) (0.031) 22 µF 10 µF 4.7 µF/6.8 µF 2.2 µF 1 µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #084. Visit our website http://www.avxcorp.com

84
Metallized Polyester
S4-Film Dielectric Capacitors
S4 07/10/15/27
CPM-13 — 7.62/10.16/15.24/27.94 Radial Leads
63/160/250/400 V-

Schoop
STANDARDIZATION HOW TO ORDER
Metallized film
Generic specifications: S4 15 4 G 0104 K --
CEI 384-1/CECC 30000/UTE 83100
L Sectional specifications: 1 2 3 4 5 6
CEI 384-2/CECC 30400/UTE 83151 1 Type and Size
On the LNZ 44-04 list:
Complies with type CPM13 2 Dielectric Class: 4 = PET
On the GAM-T1 list. 3 Voltage
4 Capacitance Value
L.S. 5 Tolerance
e 6 Suffix
Tape and Reel
H
6 (0.236) min.

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitance (CR min. ... max.)
millimeters (inches)
S4
Ø
Size Max Max Max LS VR-/VR~
+10%
Code L H e -0.05 ±0.5 63/40 160/100 250/160 400/200
07 12.0 (0.472) 7.5 (0.295) 4.5 (0.177) 0.6 (0.024) 7.62 – – 4.7 nF/6.8 nF 1 nF ... 3.3 nF
(0.300)
10 14.5 (0.571) 7.5 (0.295) 4.5 (0.177) 0.6 (0.024) 10.16 33 nF ... 100 nF 10 nF ... 33 nF 10 nF ... 22 nF 4.7 nF ... 10 nF
14.5 (0.571) 8.0 (0.315) 5.0 (0.197) 0.6 (0.024) (0.400) – 47 nF – –
20.0 (0.787) 8.0 (0.315) 4.5 (0.177) 0.8 (0.031) – 68 nF 33 nF 15 nF
20.0 (0.787) 8.0 (0.315) 5.5 (0.217) 0.8 (0.031) – 100 nF – –
20.0 (0.787) 8.5 (0.335) 4.5 (0.177) 0.8 (0.031) 150 nF – – –
20.0 (0.787) 8.5 (0.335) 5.0 (0.197) 0.8 (0.031) 220nF – – 22 nF
20.0 (0.787) 9.0 (0.354) 5.0 (0.197) 0.8 (0.031) – – 47 nF –
20.0 (0.787) 9.0 (0.354) 6.0 (0.236) 0.8 (0.031) 330 nF – 68 nF –
20.0 (0.787) 9.5 (0.374) 6.0 (0.236) 0.8 (0.031) – – – 33 nF
20.0 (0.787) 9.5 (0.374) 6.5 (0.256) 0.8 (0.031) – 150 nF – –
15 20.0 (0.787) 10.0 (0.394) 7.0 (0.276) 0.8 (0.031) 15.24 470 nF – 100 nF –
20.0 (0.787) 10.5 (0.413) 6.5 (0.256) 0.8 (0.031) (0.600) – – – 47 nF
20.0 (0.787) 10.5 (0.413) 7.5 (0.295) 0.8 (0.031) – 220 nF – –
20.0 (0.787) 11.5 (0.453) 8.5 (0.335) 0.8 (0.031) 680 nF – – –
20.0 (0.787) 13.5 (0.531) 6.5 (0.256) 0.8 (0.031) – – – 68 nF
20.0 (0.787) 13.5 (0.531) 8.0 (0.315) 0.8 (0.031) – – 150 nF –
20.0 (0.787) 13.5 (0.531) 10.5 (0.413) 0.8 (0.031) 1 µF – – –
20.0 (0.787) 14.0 (0.551) 7.5 (0.295) 0.8 (0.031) – 330 nF – –
20.0 (0.787) 15.0 (0.591) 8.5 (0.335) 0.8 (0.031) – – 220 nF 100 nF
20.0 (0.787) 15.5 (0.610) 9.0 (0.354) 0.8 (0.031) – 470 nF – –
33.0 (1.299) 11.0 (0.433) 8.0 (0.315) 1.0 (0.039) 1.5 µF – – –
33.0 (1.299) 13.0 (0.512) 7.0 (0.276) 1.0 (0.039) – – – 150 nF
33.0 (1.299) 13.0 (0.512) 10.0 (0.394) 1.0 (0.039) 2.2 µF – – –
33.0 (1.299) 13.5 (0.531) 7.5 (0.295) 1.0 (0.039) – 680 nF 330 nF –
33.0 (1.299) 14.5 (0.571) 8.5 (0.335) 1.0 (0.039) – – 470 nF 220 nF
33.0 (1.299) 14.5 (0.571) 11.5 (0.453) 1.0 (0.039) 3.3 µF – – –
33.0 (1.299) 15.0 (0.591) 9.0 (0.354) 1.0 (0.039) – 1 µF – –
33.0 (1.299) 15.0 (0.591) 10.5 (0.413) 1.0 (0.039) – – – 330 nF
27 33.0 (1.299) 15.5 (0.610) 11.0 (0.433) 1.0 (0.039) 27.94 – – 680 nF –
33.0 (1.299) 16.0 (0.630) 11.5 (0.453) 1.0 (0.039) (1.100) – 1.5 µF – –
33.0 (1.299) 18.5 (0.728) 14.0 (0.551) 1.0 (0.039) 4.7 µF – – –
33.0 (1.299) 20.0 (0.787) 12.0 (0.472) 1.0 (0.039) – 2.2 µF – –
33.0 (1.299) 20.5 (0.807) 11.0 (0.433) 1.0 (0.039) – – 1 µF 470 nF
33.0 (1.299) 21.0 (0.827) 16.5 (0.650) 1.0 (0.039) 6.8 µF – – –
33.0 (1.299) 23.5 (0.925) 14.0 (0.551) 1.0 (0.039) – – – 680 nF
33.0 (1.299) 24.0 (0.945) 14.5 (0.571) 1.0 (0.039) – – 1.5 µF –
33.0 (1.299) 24.5 (0.965) 15.0 (0.591) 1.0 (0.039) – 3.3 µF – –
33.0 (1.299) 26.5 (1.043) 17.0 (0.669) 1.0 (0.039) – – – 1 µF
33.0 (1.299) 27.5 (1.083) 18.0 (0.709) 1.0 (0.039) 10 µF 4.7 µF 2.2 µF –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #085. Visit our website http://www.avxcorp.com

85
Metallized Polyester
SH-Film Dielectric Capacitors
SH 13/18/15/25/30/40
CPM-8 – Axial Leads 63/100/250/400/630/1000 V-
dø
HOW TO ORDER
H
SH 15 4 G 0104 K --
1 2 3 4 5 6
35 ± 5 L 35 ± 5 e 1 Type and Size
STANDARDIZATION 2 Dielectric Class: 4 = PET
Generic specifications: 3 Voltage
CEI 384-1/CECC 30000/UTE 83100
4 Capacitance Value
Sectional specifications:
CEI 384-2/CECC 30400/UTE 83151
5 Tolerance
On the LNZ 44-04 list: 6 Suffix
Complies with type CPM8 Tape and Reel
Dimensions: millimeters (inches)
63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC
Capacitance Size e H L Size e H L Size e H L
Code Code Code
0.01 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512)
0.015 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512)
0.022 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 13 4.0 (0.157) 8.0 (0.315) 13.0 (0.512)
0.033 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 13 4.0 (0.157) 8.0 (0.315) 13.0 (0.512)
0.047 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512)
0.068 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512)
0.1 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 18 4.0 (0.157) 8.0 (0.315) 18.0 (0.709)
0.15 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 18 5.0 (0.197) 9.0 (0.354) 18.0 (0.709)
0.22 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 5.0 (0.197) 10.0 (0.394) 18.0 (0.709)
0.33 µF 13 4.0 (0.157) 7.0 (0.276) 13.0 (0.512) 18 5.0 (0.197) 8.0 (0.315) 18.0 (0.709) 18 6.0 (0.236) 11.0 (0.433) 18.0 (0.709)
0.47 µF 13 5.0 (0.197) 9.0 (0.354) 13.0 (0.512) 18 5.0 (0.197) 9.0 (0.354) 18.0 (0.709) 25 5.0 (0.197) 12.0 (0.472) 25.0 (0.984)
0.68 µF 13 6.0 (0.236) 9.0 (0.354) 13.0 (0.512) 18 6.0 (0.236) 9.0 (0.354) 18.0 (0.709) 25 6.0 (0.236) 13.0 (0.512) 25.0 (0.984)
1 µF 13 6.0 (0.236) 9.0 (0.354) 13.0 (0.512) 13 8.0 (0.315) 11.0 (0.433) 13.0 (0.512) 18 9.0 (0.354) 14.0 (0.551) 18.0 (0.709)
1 µF 18 5.0 (0.197) 10.0 (0.394) 18.0 (0.709) 18 7.0 (0.276) 11.0 (0.433) 18.0 (0.709) 25 7.0 (0.276) 15.0 (0.591) 25.0 (0.984)
1.5 µF 13 7.0 (0.276) 10.0 (0.394) 13.0 (0.512) 18 9.0 (0.354) 13.0 (0.512) 18.0 (0.709) 25 9.0 (0.354) 15.0 (0.591) 25.0 (0.984)
1.5 µF 18 6.5 (0.260) 11.0 (0.433) 18.0 (0.709) 25 6.0 (0.236) 14.0 (0.551) 25.0 (0.984) 30 8.0 (0.315) 16.0 (0.630) 30.0 (1.181)
2.2 µF 13 9.0 (0.354) 12.0 (0.472) 13.0 (0.512) 18 11.0 (0.433) 15.0 (0.591) 18.0 (0.709) 25 9.0 (0.354) 17.0 (0.669) 25.0 (0.984)
2.2 µF 18 7.0 (0.276) 12.0 (0.472) 18.0 (0.709) 25 7.0 (0.276) 16.0 (0.630) 25.0 (0.984) 30 10.0 (0.394) 18.0 (0.709) 30.0 (1.181)
3.3 µF 18 8.5 (0.335) 13.5 (0.531) 18.0 (0.709) 18 13.0 (0.512) 17.0 (0.669) 18.0 (0.709) 25 15.0 (0.591) 19.0 (0.748) 25.0 (0.984)
3.3 µF 25 6.0 (0.236) 14.0 (0.551) 25.0 (0.984) 25 9.0 (0.354) 16.0 (0.630) 25.0 (0.984) 30 12.0 (0.472) 20.0 (0.787) 30.0 (1.181)
4.7 µF 18 10.0 (0.394) 15.0 (0.591) 18.0 (0.709) 25 12.0 (0.472) 18.0 (0.709) 25.0 (0.984) 30 16.0 (0.630) 22.0 (0.866) 30.0 (1.181)
4.7 µF 25 7.0 (0.276) 15.0 (0.591) 25.0 (0.984) 30 10.0 (0.394) 18.0 (0.709) 30.0 (1.181) 40 12.0 (0.472) 27.0 (1.063) 40.0 (1.575)
6.8 µF 18 14.0 (0.551) 19.0 (0.748) 18.0 (0.709) 25 15.0 (0.591) 21.0 (0.827) 25.0 (0.984) 30 18.0 (0.709) 24.0 (0.945) 30.0 (1.181)
6.8 µF 25 8.0 (0.315) 16.0 (0.630) 25.0 (0.984) 30 13.0 (0.512) 21.0 (0.827) 30.0 (1.181) 40 11.0 (0.433) 21.0 (0.827) 40.0 (1.575)
10 µF 25 11.0 (0.433) 18.0 (0.709) 25.0 (0.984) 25 18.0 (0.709) 25.0 (0.984) 25.0 (0.984) 30 21.0 (0.827) 26.0 (1.024) 30.0 (1.181)
10 µF 30 9.0 (0.354) 17.0 (0.669) 30.0 (1.181) 30 14.0 (0.551) 26.0 (1.024) 30.0 (1.181) 40 14.0 (0.551) 23.0 (0.906 40.0 (1.575)
15 µF upon request upon request
22 µF upon request upon request

400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC

Capacitance
Size e H L Size e H L Size e H L
Code Code Code
0.01 µF 13 4.0 (0.157) 8.0 (0.315) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 5.0 (0.197) 10.0 (0.394) 18.0 (0.709)
0.015 µF 13 4.0 (0.157) 8.0 (0.315) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 5.0 (0.197) 10.0 (0.394) 18.0 (0.709)
0.022 µF 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 5.5 (0.217) 11.0 (0.433) 18.0 (0.709)
0.033 µF 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 5.0 (0.197) 9.0 (0.354) 18.0 (0.709) 25 5.0 (0.197) 11.0 (0.433) 25.0 (0.984)
0.047 µF 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 6.0 (0.236) 10.0 (0.394) 18.0 (0.709) 25 6.0 (0.236) 12.0 (0.472) 25.0 (0.984)
0.068 µF 13 5.0 (0.197) 8.0 (0.315) 13.0 (0.512) 18 6.0 (0.236) 12.0 (0.472) 18.0 (0.709) 25 7.0 (0.276 16.0 (0.630) 25.0 (0.984)
0.1 µF 18 5.0 (0.197) 9.0 (0.354) 18.0 (0.709) 18 6.0 (0.236) 13.0 (0.512) 18.0 (0.709) 25 9.0 (0.354) 16.0 (0.630) 25.0 (0.984)
0.15 µF 18 6.0 (0.236) 10.0 (0.394) 18.0 (0.709) 25 6.0 (0.236) 13.0 (0.512) 25.0 (0.984) 30 9.0 (0.354) 16.0 (0.630) 30.0 (1.181)
0.22 µF 25 5.0 (0.197) 10.0 (0.394) 25.0 (0.984) 25 7.0 (0.276) 15.0 (0.591) 25.0 (0.984) 30 10.0 (0.394) 20.0 (0.787) 30.0 (1.181)
0.33 µF 25 6.0 (0.236) 12.0 (0.472) 25.0 (0.984) 30 8.0 (0.315) 18.0 (0.709) 30.0 (1.181) 30 14.0 (0.551) 23.0 (0.906) 30.0 (1.181)
0.47 µF 25 7.0 (0.276) 14.0 (0.551) 25.0 (0.984) 30 11.0 (0.433) 18.0 (0.709) 30.0 (1.181) 40 10.0 (0.394) 22.0 (0.866) 40.0 (1.575)
0.68 µF 25 8.0 (0.315) 16.0 (0.630) 25.0 (0.984) 30 12.0 (0.472) 21.0 (0.827) 30.0 (1.181)
1 µF 25 11.0 (0.433) 18.0 (0.709) 25.0 (0.984) 25 11.0 (0.433) 20.0 (0.787) 25.0 (0.984)
1 µF 30 10.0 (0.394) 17.0 (0.669) 30.0 (1.181) 30 14.0 (0.551) 23.0 (0.906) 30.0 (1.181)
1.5 µF 30 11.0 (0.433) 20.0 (0.787 30.0 (1.181) 30 16.0 (0.630) 25.0 (0.984) 30.0 (1.181)
1.5 µF 40 9.0 (0.354) 18.0 (0.709) 40.0 (1.575) 40 13.0 (0.512) 25.0 (0.984) 40.0 (1.575)
2.2 µF 30 12.0 (0.472) 22.0 (0.866) 30.0 (1.181) 30 19.0 (0.748) 27.0 (1.063) 30.0 (1.181)
2.2 µF 40 10.0 (0.394) 20.0 (0.787) 40.0 (1.575) 40 15.0 (0.591) 30.0 (1.181) 40.0 (1.575)
3.3 µF 30 13.0 (0.512) 25.0 (0.984) 30.0 (1.181)
3.3 µF 40 12.0 (0.472) 23.0 (0.906) 40.0 (1.575)
4.7 µF 30 15.0 (0.591) 26.0 (1.024) 30.0 (1.181)
4.7 µF 40 14.0 (0.551) 26.0 (1.024) 40.0 (1.575)
6.8 µF
6.8 µF
10 µF
10 µF
15 µF
22 µF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #086. Visit our website http://www.avxcorp.com

86
Metallized Polyester
SG-Film Dielectric Capacitors
SG 13/18/25/30/40
CPM72 – Axial Leads 63/100/250/400/630/1000 V-
dø STANDARDIZATION HOW TO ORDER
Generic specifications: SG 13 4 G 0104 K --
CEI 384-1/CECC 30000/UTE 83100
Sectional specifications: 1 2 3 4 5 6
35 ± 5 35 ± 5
(1.378 ± 0.197)
L
(1.378 ± 0.197)
D CEI 384-2/CECC 30400/UTE 83151 1 Type and Size
On the LNZ 44-04 list: 2 Dielectric Class: 4 = PET
Complies with type CPM72
3 Voltage
4 Capacitance Value
5 Tolerance
6 Suffix Tape and Reel
Nominal Voltage (VR) and Capacitance Values (CR)
Depending on the Dimensions millimeters (inches)
63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC
Capacitance Size Code D L Size Code D L Size Code D L
0.01 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF 13 6.5 (0.256) 13.0 (0.512)
0.068 µF 13 6.5 (0.256) 13.0 (0.512) 13 7.0 (0.276) 13.0 (0.512)
0.1 µF 13 6.5 (0.256) 13.0 (0.512) 13 7.0 (0.276) 13.0 (0.512)
0.15 µF 13 6.5 (0.256) 13.0 (0.512) 13 7.5 (0.295) 13.0 (0.512)
0.22 µF 13 6.5 (0.256) 13.0 (0.512) 13 6.5 (0.256) 13.0 (0.512) 13 8.0 (0.315) 13.0 (0.512)
0.33 µF 13 6.5 (0.256) 13.0 (0.512) 18 6.0 (0.236) 18.0 (0.709) 18 8.0 (0.315) 18.0 (0.709)
0.47 µF 13 7.0 (0.276) 13.0 (0.512) 18 7.0 (0.276) 18.0 (0.709) 18 9.0 (0.354) 18.0 (0.709)
0.68 µF 13 7.0 (0.276) 13.0 (0.512) 18 8.0 (0.315) 18.0 (0.709) 18 10.0 (0.394) 18.0 (0.709)
0.68 µF 18 6.5 (0.256) 18.0 (0.709)
1 µF 13 8.0 (0.315) 13.0 (0.512) 13 11.0 (0.433) 13.0 (0.512) 18 12.0 (0.472) 18.0 (0.709)
1 µF 18 7.5 (0.276) 18.0 (0.709) 18 9.0 (0.354) 18.0 (0.709) 25 10.0 (0.394) 25.0 (0.984)
1.5 µF 13 8.0 (0.315) 13.0 (0.512) 18 11.0 (0.433) 18.0 (0.709) 25 10.0 (0.394) 25.0 (0.984)
1.5 µF 18 8.5 (0.335) 18.0 (0.709) 25 9.0 (0.354) 25.0 (0.984) 30 11.0 (0.433) 30.0 (1.181)
2.2 µF 18 9.5 (0.374) 18.0 (0.709) 18 13.0 (0.512) 18.0 (0.709) 25 14.0 (0.551) 25.0 (0.984)
2.2 µF 25 8.5 (0.335) 25.0 (0.984) 25 11.0 (0.433) 25.0 (0.984) 30 13.0 (0.512) 30.0 (1.181)
3.3 µF 18 11.0 (0.433) 18.0 (0.709) 18 15.0 (0.591) 18.0 (0.709) 25 17.0 (0.669) 25.0 (0.984)
3.3 µF 25 10.0 (0.394) 25.0 (0.984) 25 12.0 (0.472) 25.0 (0.984) 30 14.0 (0.551) 30.0 (1.181)
4.7 µF 18 13.0 (0.512) 18.0 (0.709) 25 15.0 (0.591) 25.0 (0.984) 30 18.0 (0.709) 30.0 (1.181)
4.7 µF 25 12.0 (0.472) 25.0 (0.984) 30 14.0 (0.551) 30.0 (1.181) 40 11.0 (0.433) 40.0 (1.575)
6.8 µF 25 15.0 (0.591) 25.0 (0.984) 25 17.0 (0.669) 25.0 (0.984) 30 21.0 (0.827) 30.0 (1.181)
6.8 µF 30 12.0 (0.472) 30.0 (1.181) 30 16.0 (0.630) 30.0 (1.181) 40 13.0 (0.512) 40.0 (1.575)
10 µF 25 17.0 (0.669) 25.0 (0.984) 30 18.0 (0.709) 30.0 (1.181) 30 23.0 (0.906) 30.0 (1.181)
10 µF 30 14.5 (0.571) 30.0 (1.181) 40 16.0 (0.630) 40.0 (1.575) 40 14.0 (0.551) 40.0 (1.575)
15 µF upon request upon request
22 µF upon request upon request
400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC
Capacitance Size Code D L Size Code D L Size Code D L
0.01 µF 13 6.5 (0.256) 13.0 (0.512) 13 8.0 (0.315) 13.0 (0.512)
0.015 µF 13 7.0 (0.276) 13.0 (0.512) 18 8.0 (0.315) 18.0 (0.709)
0.022 µF 13 6.5 (0.256) 13.0 (0.512) 13 8.0 (0.315) 13.0 (0.512) 18 9.0 (0.354) 18.0 (0.709)
0.033 µF 13 6.5 (0.256) 13.0 (0.512) 18 6.5 (0.256) 18.0 (0.709) 18 11.0 (0.433) 18.0 (0.709)
0.047 µF 13 7.5 (0.276) 13.0 (0.512) 18 7.0 (0.276) 18.0 (0.709) 18 12.0 (0.472) 18.0 (0.709)
0.068 µF 13 8.0 (0.315) 13.0 (0.512) 18 8.0 (0.315) 18.0 (0.709) 25 11.0 (0.433) 25.0 (0.984)
0.1 µF 18 7.0 (0.276) 18.0 (0.709) 18 10.0 (0.394) 18.0 (0.709) 25 13.0 (0.512) 25.0 (0.984)
0.15 µF 18 8.5 (0.335) 18.0 (0.709) 25 10.0 (0.394) 25.0 (0.984) 30 14.0 (0.551) 30.0 (1.181)
0.22 µF 25 9.0 (0.354) 25.0 (0.984) 25 12.5 (0.492) 25.0 (0.984) 30 16.0 (0.630) 30.0 (1.181)
0.33 µF 25 9.5 (0.374) 25.0 (0.984) 25 13.0 (0.512) 25.0 (0.984) 40 16.0 (0.630) 40.0 (1.575)
0.47 µF 25 11.0 (0.433) 25.0 (0.984) 25 14.0 (0.551) 25.0 (0.984) 40 19.0 (0.748) 40.0 (1.575)
0.68 µF 30 10.0 (0.394) 30.0 (1.181) 30 12.0 (0.472) 30.0 (1.181) 40 21.0 (0.827) 40.0 (1.575)
0.68 µF
1 µF 25 16.0 (0.630) 25.0 (0.984) 30 14.0 (0.551) 30.0 (1.181)
1 µF 30 11.0 (0.433) 30.0 (1.181) 40 15.0 (0.591) 40.0 (1.575)
1.5 µF 30 12.0 (0.472) 30.0 (1.181) 30 16.0 (0.630) 30.0 (1.181)
1.5 µF 40 14.0 (0.551) 40.0 (1.575) 40 16.0 (0.630) 40.0 (1.575)
2.2 µF 30 13.0 (0.512) 30.0 (1.181) 30 17.0 (0.669) 30.0 (1.181)
2.2 µF 40 17.0 (0.669) 40.0 (1.575) 40 18.0 (0.709) 40.0 (1.575)
3.3 µF 30 16.0 (0.630) 30.0 (1.181)
3.3 µF 40 20.0 (0.787) 40.0 (1.575)
4.7 µF
4.7 µF
6.8 µF
6.8 µF
10 µF
10 µF
15 µF
22 µF
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #087.
Visit our website http://www.avxcorp.com

87
Metallized Polyester
Film Dielectric Capacitors
ST 22/36
Axial Leads 630 V- ... 10,000 V-

HOW TO ORDER
25 (0.984) min. L ST 36 4 V 0102 M --
1 23 4 5 6
1 Type and Size
2 Dielectric Class: 4 = PET
3 Voltage
Ø 4 Capacitance Value
5 Tolerance
D
6 Suffix
Tape and Reel

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitances (CR min. ... max.)
millimeters (inches)
ST
Size Max Max Ø VR-
+10%
Code L D -0.05 630 1,000 1,600 2,500 5,000 6,300 10,000
22.0 10.0 0.8 – 15 nF/22 nF 6.8 nF ~ 15 nF 2.2 nF ~ 4.7 nF 150 pF/220 pF – –
(0.866) (0.394) (0.031)
22.0 12.5 0.8 – 33 nF/47 nF 22 nF 6.8 nF 330 pF/470 pF – –
22 (0.866) (0.492) (0.031)
22.0 15.0 0.8 – 68 nF 33 nF 10 nF/15 nF 680 pF – –
(0.866) (0.591) (0.031)
22.0 17.5 0.8 – 100 nF 47 nF/68 nF 22 nF 1 nF – –
(0.866) (0.689) (0.031)
36.0 10.0 1.0 – 47 nF 15 nF~ 33 nF 6.8 nF ~ 10 nF 1.5 nF/2.2 nF 1 nF 100 pF/220 pF
(1.417) (0.394) (0.031)
36.0 12.5 1.0 – 68 nF/100 nF 47 nF 15 nF/22 nF 3.3 nF/4.7 nF 1.5 nF 330 pF
(1.417) (0.492) (0.031)
36.0 15.0 1.0 – 150 nF 68 nF/100 nF 33 nF 6.8 nF 2.2 nF/3.3 nF 470 pF/680 pF
(1.417) (0.591) (0.031)
36 36.0 17.5 1.0 – 220 nF 150 nF 47 nF 10 nF 4.7 nF 1 nF
(1.417) (0.689) (0.031)
36.0 20.0 1.0 – 330 nF – 68 nF 15 nF – –
(1.417) (0.787) (0.031)
36.0 22.5 1.0 1 µF 470 nF 220 nF 100 nF – 6.8 nF 1.5 nF
(1.417) (0.886) (0.031)
36.0 25.0 1.0 1.5 µF – 330 nF – 22 nF 10 nF 2.2 nF
(1.417) (0.984) (0.031)
36.0 27.5 1.0 – 680 nF – 150 nF 33 nF – –
(1.417) (1.083) (0.031)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #088. Visit our website http://www.avxcorp.com

88
TPC 'X' Class Suppression Capacitors
QX Series
L W HOW TO ORDER
QX 22 4 H 0334 M EN
H
1 2 3 4 5 6 7
1 Series Code:
QX = 'X' Class
6 (.236)+0 *
-2 (-.079)
2 Size Code:
10 = 10mm Pitch; 15 = 15mm Pitch
p±0.4
+10%
22 = 22.5mm Pitch; 27 = 27.5mm Pitch
(.016) Ø = 0.8 (.031) -0.05 (-.002)
3 Dielectric Code:
*Other lead lengths upon request 4 = QX
4 Voltage Code:
• For X2 electromagnetic interference suppression. H = 275 Vac QX Series
• Specially designed to meet the requirements of the 5 Capacitance Code:
NEW IEC 384-14 specification (2.5 kV peak pulse volt- 1st digit: insignificant. 2nd & 3rd: 2 signifi-
age test). cant figures of the capacitance value. 4th
digit: number of zeros to follow the capac-
• Approved for 3 kV pulse test. itance code.
Approvals Example: 0334 = 330,000pF
VDE EN 132 400 Class X2 capacitors 6 Tolerance Code:
K = ±10%
up to 1µF File No. 94684
M = ±20%
IMQ EN 132 400 Class X2 capacitors
7 Packaging Code:
up to 1µF File No. V 4492
Blank Bulk
SEV EN 132 400 Class X2 capacitors EN: Taped
up to 1µF File No. 96.1 10440.01
CSA C22.2 Across the line
N° 1-94 capacitors
up to 1µF File No. LR 100430.8
UL 1414 Across the line capacitors
up to 1µF File No. E 184051
CSA and UL approved with a voltage of 250 Vac only.
Approved according to EN 132 400 (IEC 384-14, 2nd Edition 1993).

Capacitance Range and Dimensions: millimeters (inches)

Dimensions Rated
Size Capacitance P ± 0.4 L H W current at 50 Hz
Pitch Length ± 0.4 Height ± 0.3 Width ± 0.4 (mA)
1 nF 10.0 (0.394) 12.4 (0.488) 9.9 (0.390) 5.0 (0.197) 0.10
1.5 nF 10.0 (0.394) 12.4 (0.488) 9.9 (0.390) 5.0 (0.197) 0.15
2.2 nF 10.0 (0.394) 12.4 (0.488) 9.9 (0.390) 5.0 (0.197) 0.22
10 3.3 nF 10.0 (0.394) 12.4 (0.488) 9.9 (0.390) 5.0 (0.197) 0.33
4.7 nF 10.0 (0.394) 12.4 (0.488) 9.9 (0.390) 5.0 (0.197) 0.47
6.8 nF 10.0 (0.394) 12.4 (0.488) 13.4 (0.528) 5.0 (0.197) 0.68
10 nF 10.0 (0.394) 12.4 (0.488) 13.4 (0.528) 5.0 (0.197) 1.00
10 nF 15.0 (0.591) 17.4 (0.685) 10.4 (0.409) 5.0 (0.197) 1.00
15 nF 15.0 (0.591) 17.4 (0.685) 10.4 (0.409) 5.0 (0.197) 1.50
22 nF 15.0 (0.591) 17.4 (0.685) 10.4 (0.409) 5.0 (0.197) 2.20
33 nF 15.0 (0.591) 17.4 (0.685) 10.4 (0.409) 5.0 (0.197) 3.30
15 47 nF 15.0 (0.591) 17.4 (0.685) 10.4 (0.409) 5.0 (0.197) 4.70
68 nF 15.0 (0.591) 17.4 (0.685) 13.4 (0.528) 5.0 (0.197) 6.80
100 nF 15.0 (0.591) 17.4 (0.685) 13.4 (0.528) 6.1 (0.240) 10.0
150 nF 15.0 (0.591) 17.4 (0.685) 14.4 (0.567) 8.3 (0.327) 15.0
150 nF 22.5 (0.886) 26.1 (1.028) 14.9 (0.587) 7.3 (0.287) 15.0
220 nF 22.5 (0.886) 26.1 (1.028) 14.9 (0.587) 7.3 (0.287) 22.0
22 330 nF 22.5 (0.886) 26.1 (1.028) 19.4 (0.764) 9.8 (0.386) 33.0
470 nF 22.5 (0.886) 26.1 (1.028) 19.4 (0.764) 9.8 (0.386) 47.0
470 nF 27.5 (1.083) 31.1 (1.224) 19.3 (0.760) 9.8 (0.386) 47.0
680 nF 27.5 (1.083) 31.1 (1.224) 22.4 (0.882) 12.9 (0.508) 68.0
27 1000 nF 27.5 (1.083) 31.1 (1.224) 22.4 (0.882) 12.9 (0.508) 100.0
1500 nF 27.5 (1.083) 31.1 (1.224) 29.8 (1.173) 17.3 (0.681) 150.0
2200 nF 27.5 (1.083) 31.1 (1.224) 31.3 (1.232) 20.7 (0.815) 220.0
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #089. Visit our website http://www.avxcorp.com

89
TPC 'Y' Class Suppression Capacitors
BY Series
HOW TO ORDER
e
BY 22 6 G 0334 M EN
1 2 3 4 5 6 7
L 1 Series Code:
0.4 BY = 'Y' Class
(.016)
Min. H 2 Size Code:
10 = 10mm Pitch; 15 = 15mm Pitch
22 = 22.5mm Pitch; 27 = 27.5mm Pitch
6 (.236) +0 *
-2 (-.079) 3 Dielectric Code:
6 = BY
d ±0.4
(.016) 0.8 (.031) +10%
-0.05%
4 Voltage Code:
G = 250 Vac BY Series
Dimensions mm (inches) 5 Capacitance Code:
*Other lead lengths upon request 1st digit: insignificant. 2nd & 3rd:
2 significant figures of the capacitance value.
• Y function suppression capacitor (Urms = 250 V).
4th digit: number of zeros to follow the
• Mains suppression, earth-mains connection, shock capacitance code.
protection. Example: 0334 = 330,000pF
• Non-inductive, self-healing, insulated. 6 Tolerance Code:
K = ±10%
M = ±20%
Approvals 7 Packaging Code:
Blank Bulk
VDE 0565-1 All models File No. 49950
EN: Taped

IMQ All models File No. V2258

DEMKO All models File No. 91975 EC

SEMKO All models File No. 8850110

FI SETI All models File No. 126107-01

NEMKO All models File No. M 69061

ÖVE All models File No. 19602/R

UL 1283 All models File No. 102673

Capacitance Range and Dimensions: millimeters (inches)

Format CR Dimensions
Size (nF) L max. H max. e max. d ± 0.4
1 - 1.5 - 2.2 12.5 (.492) 10.0 (.394) 5.0 (.197) 10.0 (.394)
10
3.3 12.5 (.492) 13.5 (.531) 5.0 (.197) 10.0 (.394)
4.7 / 6.8 17.5 (.689) 10.5 (.413) 5.0 (.197) 15.0 (.591)
15 10 17.5 (.689) 13.5 (.531) 5.0 (.197) 15.0 (.591)
15 - 22 17.5 (.689) 14.5 (.571) 8.5 (.335) 15.0 (.591)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #090. Visit our website http://www.avxcorp.com

90
Metallized Polypropylene
SI-Precision Film Dielectric Capacitors

Polypropylene

Armature
HOW TO ORDER
SI18 6 G 0103 J --
1 23 4 5 6
25 (0.984) min. L 1 Type and Size
2 Dielectric Class: Polypropylene
3 Voltage: D = 63, G = 250,
F = 160, I = 400
+10% 4 Capacitance Value: 10,000pF
Ø -0.05 5 Tolerance: ±1%, ±2%, ±5%
6 Suffix
D

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitances (CR min. ... max.)
millimeters (inches) VR- / VR~
Size Max Max Ø D F G I
+10%
Code L D -0.05 63 VR 160 VR 250 VR 400 VR
18 20.0 (0.787) 7.5 (0.295) 0.8 (0.031) 30.9nF ~ 47.5nF 16.2nF ~ 30.1nF 3.92nF ~ 16.2nF 100pF ~ 4.32nF
20.0 (0.787) 8.75 (0.344) 0.8 (0.031) 48.7nF ~ 68.1nF 30.9nF ~ 43.2nF 16.5nF ~ 24.3nF 4.42nF ~ 6.34nF
20.0 (0.787) 10.0 (0.394) 0.8 (0.031) 69.8nF ~ 100nF 44.2nF ~ 63.4nF 24.9nF ~ 33.2nF 6.49npF ~ 9.31nF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #091. Visit our website http://www.avxcorp.com

91
Metallized Polypropylene
SC-Precision Film Dielectric Capacitors

Schoop

Metallized film HOW TO ORDER

SC18 6 I 0104 J --
1 2 3 4 5 6
25 (0.984) min. L 1 Type and Size
2 Dielectric Class: Polypropylene
3 Voltage: F = 160, I = 400,
G = 250, K = 630
4 Capacitance Value: 0.1µF
+10%
Ø -0.05 5 Tolerance: ±1%, ±2%, ±5%
6 Suffix
D

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitances (CR min. ... max.)
millimeters (inches) VR- / VR~
Size Max Max Ø F G I K
+10%
Code L D -0.05 160/100 250/160 400/200 630/250
10 12.0 (0.472) 5.0 (0.197) 0.6 (0.024) 8.25nF ~ 21.5nF 4.30nF ~ 8.25nF 2.40nF ~ 4.22nF 1nF ~ 2.37nF
13 14.5 (0.571) 5.0 (0.197) 0.6 (0.024) 22nF ~ 42.2nF 8.45nF ~ 17.8nF 4.3nF ~ 9.1nF 2.40nF ~ 5.11nF
14.5 (0.571) 6.25 (0.246) 0.6 (0.024) 43nF ~ 75nF 18nF ~ 31.6nF 9.31nF ~ 17.8nF 5.23nF ~ 10nF
14.5 (0.571) 7.5 (0.295) 0.6 (0.024) 76.8nF ~ 133nF 32.4nF ~ 62nF 18nF ~ 31.6nF 10.2nF ~ 19.6nF
18 19.0 (0.748) 7.5 (0.295) 0.8 (0.031) 137nF ~ 215nF 63.4nF ~ 91nF 32.4nF ~ 51.1nF 20nF ~ 31.6nF
19.0 (0.748) 8.75 (0.344) 0.8 (0.031) 220nF ~ 316nF 93.1nF ~ 147nF 52.3nF ~ 75nF 32.4nF ~ 47nF
19.0 (0.748) 10.0 (0.394) 0.8 (0.031) 324nF ~ 470nF 150nF ~ 215nF 76.8nF ~ 110nF 47.5nF ~ 75nF
25 27.5 (1.083) 8.75 (0.344) 0.8 (0.031) 475nF ~ 634nF 220nF ~ 274nF 113nF ~ 150nF 76.8nF ~ 100nF
27.5 (1.083) 10.0 (0.394) 0.8 (0.031) 649nF ~ 910nF 280nF ~ 402nF 154nF ~ 221nF 102nF ~ 147nF
27.5 (1.083) 11.25 (0.443) 0.8 (0.031) 931nF ~ 1.21µF 412nF ~ 536nF 226nF ~ 294nF 150nF ~ 196nF
27.5 (1.083) 12.5 (0.492) 0.8 (0.031) 1.24µF ~ 1.54µF 549nF ~ 698nF 300nF ~ 383nF 200nF ~ 249nF
31 32.5 (1.280) 12.5 (0.492) 0.8 (0.031) 1.58µF ~ 1.96µF 715nF ~ 866nF 390nF ~ 487nF 255nF ~ 316nF
32.5 (1.280) 15.0 (0.591) 0.8 (0.031) 2µF ~ 3.01µF 887nF ~ 1.33µF 499nF ~ 750nF 324nF ~ 487nF
32.5 (1.280) 17.5 (0.689) 0.8 (0.031) 3.09µF ~ 4.22µF 1.37µF ~ 1.78µF 768nF ~ 1.07µF 499nF ~ 681nF
32.5 (1.280) 20.0 (0.787) 0.8 (0.031) 4.30µF ~ 5.62µF 1.8µF ~ 2.55µF 1.1µF ~ 1.43µF 698nF ~ 931nF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #092. Visit our website http://www.avxcorp.com

92
Metallized Polypropylene
SA-Voltage Gradient Film Dielectric Capacitors

Voltage Gradients According to Voltage and Size HOW TO ORDER

Schoop
Tension/Voltage Format Gradient* SA18 6 G 0334 J --
Metallized film Size (du/dt)R
VR- VR~ (eff/rms) (V/µs) 1 23 4 5 6
10 1200
13 850 1 Type and Size
160V 100V 18
27
400
160
2 Dielectric Class: Polypropylene
L
25 (0.984) min.
31 110 3 Voltage: F = 160
10 1310 G = 250
13 1000
250V 160V 18 440 I = 400
27 195 K = 630
31
10
150
1620
4 Capacitance Value: 10,000pF
Ø 13 1250 5 Tolerance
400V 200V 18 985
+10%
27 260 6 Suffix
-0.05 31 200 *For nominal rms currents consult AVX.
H 10 2750
13 2500
630V 250V 18 1930
27 1090
e 31 760
Absolute limits which must not be exceeded for
rapid discharges with nominal voltage VR –

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitances (CR min. ... max.)
millimeters (inches) VR- / VR~
Size Max Max Max Ø F G I K
+10%
Code L H e -0.05 160/100 250/160 400/200 630/250
10 12.0 (0.472) 7.5 (0.295) 4.5 (0.177) 0.6 (0.024) 16nF ~ 33nF 9.1nF ~ 15nF 5.6nF ~ 8.2nF 1nF ~ 5.1nF
13 14.5 (0.571) 7.5 (0.295) 4.5 (0.177) 0.6 (0.024) 36nF ~ 68nF 16nF ~ 30nF 9.1nF ~ 16nF 5.6nF ~ 10nF
14.5 (0.571) 11.0 (0.433) 4.5 (0.177) 0.6 (0.024) 75nF ~ 0.13µF 33nF ~ 56nF 18nF ~ 33nF 11nF ~ 20nF
18 20.0 (0.787) 11.0 (0.433) 4.5 (0.177) 0.8 (0.031) 0.15µF ~ 0.24µF 62nF ~ 0.11µF 36nF ~ 62nF 22nF ~ 39nF
20.0 (0.787) 11.0 (0.433) 5.75 (0.226) 0.8 (0.031) 0.27µF ~ 0.33µF 0.12µF ~ 0.13µF 68nF ~ 82nF 43nF ~ 51nF
20.0 (0.787) 12.0 (0.472) 7.0 (0.276) 0.8 (0.031) 0.36µF ~ 0.47µF 0.15µF ~ 0.20µF 91nF ~ 0.11µF 56nF ~ 75nF
20.0 (0.787) 13.0 (0.512) 8.25 (0.325) 0.8 (0.031) 0.51µF ~ 0.56µF 0.22µF ~ 0.27µF 0.12µF ~ 0.15µF 82nF ~ 0.1µF
20.0 (0.787) 14.0 (0.551) 9.5 (0.374) 0.8 (0.031) 0.62µF ~ 0.75µF 0.30µF ~ 0.33µF 0.16µF ~ 0.18µF 0.11µF ~ 0.12µF
20.0 (0.787) 16.0 (0.630) 9.5 (0.374) 0.8 (0.031) 0.82µF ~ 0.91µF 0.36µF ~ 0.43µF 0.20µF ~ 0.24µF 0.13µF ~ 0.15µF
20.0 (0.787) 18.0 (0.709) 12.0 (0.472) 0.8 (0.031) 1µF ~ 1.3µF 0.47µF ~ 0.56µF 0.27µF ~ 0.33µF 0.16µF ~ 0.22µF
20.0 (0.787) 22.0 (0.866) 14.0 (0.551) 0.8 (0.031) 1.5µF ~ 2µF 0.62µF ~ 0.82µF 0.36µF ~ 0.51µF 0.24µF ~ 0.33µF
20.0 (0.787) 26.0 (1.024) 16.5 (0.650) 0.8 (0.031) 2.2µF ~ 2.7µF 0.91µF ~ 1.2µF 0.56µF ~ 0.68µF 0.36µF ~ 0.47µF
27 28.5 (1.122) 12.0 (0.472) 7.0 (0.276) 1.0 (0.039) 0.82µF 0.36µF ~ 0.39µF 0.20µF ~ 0.22µF 0.13µF
28.5 (1.122) 13.5 (0.531) 7.0 (0.276) 1.0 (0.039) 0.91µF ~ 1µF 0.43µF 0.24µF 0.15µF ~ 0.16µF
28.5 (1.122) 14.5 (0.571) 8.25 (0.325) 1.0 (0.039) 1.1µF ~ 1.3µF 0.47µF ~ 0.62µF 0.27µF ~ 0.36µF 0.18µF ~ 0.22µF
28.5 (1.122) 16.0 (0.630) 9.5 (0.374) 1.0 (0.039) 1.5µF ~ 1.6µF 0.68µF ~ 0.75µF 0.39µF ~ 0.43µF 0.24µF ~ 0.30µF
28.5 (1.122) 18.0 (0.709) 12.0 (0.472) 1.0 (0.039) 1.8µF ~ 2.4µF 0.82µF ~ 1.1µF 0.47µF ~ 0.62µF 0.33µF ~ 0.39µF
28.5 (1.122) 22.0 (0.866) 14.0 (0.551) 1.0 (0.039) 2.7µF ~ 3.6µF 1.2µF ~ 1.6µF 0.68µF ~ 0.91µF 0.43µF ~ 0.62µF
28.5 (1.122) 26.0 (1.024) 16.5 (0.650) 1.0 (0.039) 3.9µF ~ 5.1µF 1.8µF ~ 2.4µF 1µF ~ 1.3µF 0.68µF ~ 0.91µF
31 33.0 (1.300) 16.0 (0.630) 9.5 (0.374) 1.0 (0.039) 1.8µF ~ 2µF 0.82µF ~ 0.91µF 0.47µF ~ 0.51µF 0.33µF ~ 0.36µF
33.0 (1.300) 19.0 (0.748) 12.0 (0.472) 1.0 (0.039) 2.2µF ~ 3µF 1µF ~ 1.3µF 0.56µF ~ 0.82µF 0.39µF ~ 0.51µF
33.0 (1.300) 22.5 (0.886) 14.5 (0.571) 1.0 (0.039) 3.3µF ~ 4.7µF 1.5µF ~ 2.2µF 0.91µF ~ 1.2µF 0.56µF ~ 0.82µF
33.0 (1.300) 26.5 (1.043) 17.0 (0.669) 1.0 (0.039) 5.1µF ~ 6.8µF 2.4µF ~ 3µF 1.3µF ~ 1.8µF 0.91µF ~ 1.1µF
33.0 (1.300) 28.5 (1.122) 19.0 (0.748) 1.0 (0.039) 7.5µF ~ 8.2µF 3.3µF ~ 3.9µF 2µF ~ 2.2µF 1.2µF ~ 1.3µF
33.0 (1.300) 31.0 (1.220) 21.5 (0.846) 1.0 (0.039) 9.1µF ~ 10µF 4.3µF ~ 4.7µF 2.4µF ~ 2.7µF 1.5µF ~ 1.8µF
Values from the E24 Series (tol. ±5%)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #093. Visit our website http://www.avxcorp.com

93
Metallized Polypropylene
S2-Voltage Gradient Film Dielectric Capacitors

Schoop Voltage Gradients According to Voltage and Size HOW TO ORDER

Metallized film Tension/Voltage Format Gradient* S218 6 K 0103 J --
Size (du/dt)R
Armatures VR- VR~ (eff/rms) (V/µs) 1 23 4 5 6
18 2400
630V 330V 27 2000 1 Type and Size
35
45
1700
1300
2 Dielectric Class: Polypropylene
25 (0.984) min. L 18 3600 3 Voltage: K = 630, M = 1600,
1kF 425V 27 3000 L = 1000, N = 2000
35 2300
45 2000 4 Capacitance Value: 10,000pF
18
27
7400
6400
5 Tolerance
1.6kV 500V
+10% 35 4300 6 Suffix
Ø -0.05 45 3400
*For nominal rms currents consult AVX.
18 10100
2kV 500V 27 10100
35 6700
D 45 3800
Absolute limits which must not be exceeded in
rapid discharge under nominal voltage VR –

Nominal Voltage (VR) and Capacitance Values (CR)

Depending on the Dimensions
DIMENSIONS: Range of Capacitances (CR min. ... max.)
millimeters (inches) VR- / VR~
Size Max Max Ø K L M N
+10%
Code L D -0.05 630/330 1000/425 1600/500 2000/500
18 20.0 (0.787) 7.5 (0.295) 0.8 (0.031) 2.4nF ~ 4.7nF 910pF ~ 2.2nF 680pF ~ 820pF 100pF ~ 560pF
20.0 (0.787) 8.75 (0.344) 0.8 (0.031) 5.1nF ~ 6.8nF 2.7nF ~ 3.6nF 910pF ~ 1.3nF 620pF ~ 910pF
20.0 (0.787) 10.0 (0.394) 0.8 (0.031) 7.5nF ~ 10nF 3.9nF ~ 4.7nF 1.5nF ~ 1.8nF 1nF ~ 1.2nF
20.0 (0.787) 12.5 (0.492) 0.8 (0.031) 11nF ~ 16nF 5.1nF ~ 8.2nF 2nF ~ 3.3nF 1.3nF ~ 2.2nF
20.0 (0.787) 13.75 (0.541) 0.8 (0.031) 18nF ~ 20nF 9.1nF ~ 10nF 3.6nF ~ 3.9nF 2.4nF ~ 3nF
20.0 (0.787) 15.0 (0.591) 0.8 (0.031) 22nF ~ 24nF 11nF ~ 12nF 4.3nF ~ 4.7nF 3.30nF
27 29.0 (1.142) 7.5 (0.295) 0.8 (0.031) 7.5nF ~ 15nF 2.7nF ~ 6.8nF 1.6nF ~ 2.4nF 0.62nF ~ 1.5nF
29.0 (1.142) 8.75 (0.344) 0.8 (0.031) 16nF ~ 22nF 7.5nF ~ 10nF 2.7nF ~ 3.6nF 1.6nF ~ 2.4nF
29.0 (1.142) 10.0 (0.394) 0.8 (0.031) 24nF ~ 30nF 11nF ~ 15nF 3.9nF ~ 5.1nF 2.7nF ~ 3.6nF
29.0 (1.142) 12.5 (0.492) 0.8 (0.031) 33nF ~ 51nF 16nF ~ 24nF 5.6nF ~ 9.1nF 3.9nF ~ 6.2nF
29.0 (1.142) 15.0 (0.591) 0.8 (0.031) 56nF ~ 75nF 27nF ~ 36nF 10nF ~ 13nF 6.8nF ~ 9.1nF
29.0 (1.142) 17.5 (0.689) 0.8 (0.031) 82nF ~ 100nF 39nF ~ 51nF 15nF ~ 20nF 10nF ~ 13nF
29.0 (1.142) 20.0 (0.787) 0.8 (0.031) 110nF ~ 130nF 56nF ~ 68nF 22nF ~ 27nF 15nF ~ 18nF
35 33.0 (1.300) 10.0 (0.394) 1.0 (0.039) 24nF ~ 47nF 9.1nF ~ 22nF 5.6nF ~ 8.2nF 1nF ~ 5.1nF
33.0 (1.300) 12.5 (0.492) 1.0 (0.039) 51nF ~ 75nF 24nF ~ 39nF 9.1nF ~ 13nF 5.6nF ~ 10nF
33.0 (1.300) 15.0 (0.591) 1.0 (0.039) 82nF ~ 120nF 43nF ~ 56nF 15nF ~ 22nF 11nF ~ 15nF
33.0 (1.300) 17.5 (0.689) 1.0 (0.039) 130nF ~ 160nF 62nF ~ 82nF 24nF ~ 30nF 16nF ~ 22nF
33.0 (1.300) 20.0 (0.787) 1.0 (0.039) 180nF ~ 220nF 91nF ~ 110nF 33nF ~ 43nF 24nF ~ 30nF
33.0 (1.300) 22.5 (0.886) 1.0 (0.039) 240nF ~ 270nF 120nF ~ 130nF 47nF ~ 51nF 33nF ~ 36nF
33.0 (1.300) 25.0 (0.984) 1.0 (0.039) 300nF ~ 360nF 150nF ~ 160nF 56nF ~ 62nF 39nF ~ 47nF
33.0 (1.300) 27.5 (1.083) 1.0 (0.039) 390nF ~ 430nF 180nF ~ 220nF 68nF ~ 82nF 51nF ~ 56nF
33.0 (1.300) 30.0 (1.181) 1.0 (0.039) 470nF ~ 510nF 240nF ~ 280nF 91nF ~ 100nF 62nF ~ 68nF
33.0 (1.300) 32.5 (1.280) 1.0 (0.039) 560nF ~ 620nF 300nF 110nF 75nF ~ 82nF
33.0 (1.300) 35.0 (1.378) 1.0 (0.039) 680nF 330nF ~ 360nF 120nF ~ 130nF 91nF
33.0 (1.300) 37.5 (1.476) 1.0 (0.039) 750nF ~ 820nF 390nF 150nF ~ 160nF 100nF ~ 110nF
45 45.0 (1.772) 12.5 (0.492) 1.0 (0.039) 82nF ~ 110nF 47nF ~ 56nF 16nF ~ 22nF 10nF ~ 15nF
45.0 (1.772) 15.0 (0.591) 1.0 (0.039) 120nF ~ 180nF 62nF ~ 82nF 24nF ~ 36nF 16nF ~ 24nF
45.0 (1.772) 17.5 (0.689) 1.0 (0.039) 200nF ~ 240nF 91nF ~ 120nF 39nF ~ 47nF 27nF ~ 33nF
45.0 (1.772) 20.0 (0.787) 1.0 (0.039) 270nF ~ 330nF 130nF ~ 160nF 51nF ~ 62nF 36nF ~ 43nF
45.0 (1.772) 22.5 (0.886) 1.0 (0.039) 360nF ~ 430nF 180nF ~ 220nF 68nF ~ 82nF 47nF ~ 56nF
45.0 (1.772) 25.0 (0.984) 1.0 (0.039) 470nF ~ 560nF 240nF ~ 270nF 91nF ~ 110nF 62nF ~ 75nF
45.0 (1.772) 27.5 (1.083) 1.0 (0.039) 620nF ~ 680nF 300nF ~ 330nF 120nF ~ 130nF 82nF ~ 91nF
45.0 (1.772) 30.0 (1.181) 1.0 (0.039) 750nF ~ 820nF 360nF ~ 390nF 150nF 100nF ~ 110nF
45.0 (1.772) 32.5 (1.280) 1.0 (0.039) 910nF 430nF ~ 470nF 160nF ~ 180nF 120nF
45.0 (1.772) 35.0 (1.378) 1.0 (0.039) 1µF ~ 1.1µF 510nF ~ 560nF 200nF ~ 220nF 130nF ~ 150nF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #094. Visit our website http://www.avxcorp.com

94
Thick Film Chip Resistors
CR05 / CR10 / CR21 / CR32 Series
HOW TO ORDER
L
CR 32 - 101 J - T
W 1 2 3 4 5
1 Style: CR = Chip resistor; CJ = Zero ohm jumper
C C 2 Case Size:
05 = 0402 10 = 0603
T 21 = 0805 32 = 1206
D D 3 Resistance Code:
G, J, and K tolerances = 2 significant digits plus number of zeros
F tolerance = 3 significant digits plus number of zeros
Standard Packaging: Zero ohm jumper = 000
BULK TAPE & REEL 4 Resistance Tolerance:
7" 10" Blank = Jumper K = ±10%
CR05 1,000 10,000 50,000 G = ±2% J = ±5%
CR10 1,000 5,000 10,000 F = ±1% (available in case size CR10, CR21 and CR32 only)
CR21 1,000 5,000 10,000 5 Packaging
CR32 1,000 5,000 10,000

Dimensions: millimeters (inches)

CR05 (0402) CR10 (0603) CR21 (0805) CR32 (1206)
L 1.00 ±0.05 (.039±.002) 1.60 ±0.10 (.063 ±.004) 2.00 ±0.10 (.079 ±.004) 3.10 ±0.10 (.122±.004)
W 0.50 ±0.05 (.020±.002) 0.80 +0.15
-0.10 (.031
-
+.006 +0.15
–.004) 1.25 -0.10 (.049 +.006 +0.15
–.004) 1.55 –0.10
+.006
(.061–.004 )
T 0.35±0.05 (.014±.002) 0.50 ±0.10 (.020 ±.004) 0.55 ±0.10 (.022 ±.004) 0.55 +0.10
–0.05
+.004
(.022–.002 )
C 0.20±0.15 (.008±.006) 0.25 ±.020 (.010 ±.008) 0.35±0.20 (.014 ±.008) 0.45±0.20 (.018±.008)
D 0.20±0.10 (.008±.004) 0.20 +0.20
-0.15 (.008
-
+.008
–.006) 0.40 ±0.20 (.016 ±.008) 0.45±0.20 (.018±.008)

Temperature Coefficient of Resistance

CR05 CR10
Tolerance F J K F G J K
(±1%) (±5%) (±10%) (±1%) (±2%) (±5%) (±10%)

Resistance 10Ω 10Ω 1MΩ 2.2Ω 10Ω 1MΩ 10Ω 100Ω 10Ω 1MΩ 1.0Ω 10Ω 1MΩ
∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫
Range 1MΩ 1MΩ 2.2MΩ 10Ω 1MΩ 10MΩ 100Ω 1MΩ 1MΩ 2.2Ω 10Ω 1MΩ 10MΩ
TCR -500 -100 -500 -500 -100 -500
±100 ±250 ∫ ∫ ±250 ∫ ±100 ±100* ±200 ∫ ∫ ±200 ∫
(ppm/°C) +300 +600 +300 +300 +600 +300

CR21 CR32
Tolerance D F G J K D F G J K
(±0.5%) (±1%) (±2%) (±5%) (±10%) (±0.5%) (±1%) (±2%) (±5%) (±10%)

Resistance 10Ω 10Ω 100Ω 10Ω 1MΩ 1.0Ω 10Ω 1MΩ 0.47Ω 1.0Ω 10Ω 1MΩ 10Ω 10Ω 100Ω 10Ω 1MΩ 1.0Ω 1MΩ 10Ω 0.36Ω 1.0Ω 10Ω 1MΩ
∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫
Range 1MΩ 100MΩ 1MΩ 1MΩ 2.2MΩ 10Ω 1MΩ 10MΩ 1.0Ω 10Ω 1MΩ 10MΩ 1MΩ 100Ω 1MΩ 1MΩ 2.2MΩ 10Ω 10MΩ 1MΩ 1.0Ω 10Ω 1MΩ 10MΩ

TCR -500 -100 -500 -100 -100 -500 -500 -100 -500 -100 -100 -500
±100 ±100 ±100 ±200 ∫ ∫ ±200 ∫ ∫ ∫ ±200 ∫ ±100 ±100 ±100 ±200 ∫ ∫ ∫ ±200 ∫ ∫ ±200 ∫
(ppm/°C) +300 +600 +300 +1000 +600 +300 +300 +600 +300 ±1000 +600 +300

Chip Resistor Ratings

Style
Spec CR05 (0402) CR10 (0603) CR21 (0805) CR32 (1206)
Power 0.603 (1/16) W 0.603 (1/10) W 0.100 (1/8) W 0.125 (1/4) W
Voltage 50V 50V 100V 200V
F J K F G J K D F G J K D F G J K
Tolerance (±1%) (±5%) (±10%) (±1%) (±2%) (±5%) (±10%) (±0.5%) (±1%) (±2%) (±5%) (±10%) (±0.5%) (±1%) (±2%) (±5%) (±10%)
10Ω 10Ω 2.2Ω 10Ω 10Ω 1.0Ω 10Ω 10Ω 10Ω 1.0Ω 1.0Ω 10Ω 10Ω 10Ω 1.0Ω 0.36Ω 1.0Ω
Value ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫
Range 1MΩ 2.2 MΩ 10MΩ 1MΩ 2.2MΩ 10MΩ 1MΩ 1MΩ 2.2MΩ 10MΩ 10MΩ 1MΩ 1MΩ 2.2MΩ 10MΩ 10MΩ 10MΩ
Working -55°C ~ +125°C
Temperature

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #095. Visit our website http://www.avxcorp.com

95
Thick Film Chip Resistor
Arrays (2, 4 & 8 Resistors)

HOW TO ORDER
CRA3A 3E 103 J T
1 2 3 45
2
2

22
1 Style & Size:
47
27

4477
CRB1A/CRC1A
CRA3A/CRB3A/CRC3A
CRB2A
RNA4A
Note: change CR to CJ for
Dimensions: millimeters (inches) 0 ohm jumpers
2 elements
CRB1A2E series
2 elements
CRC1A2E series 2 Number of Resistors:
L C L t
2E = Two resistors
d
e1 t d e2
4E = Four resistors
C
Style W
W 8E = Eight resistors
P
C
d
C P d 3 Resistance Code:
W 1.60±0.15 (.063±.006) 1.60±0.15 (.063±.006) Standard decade values
L 1.60±0.15 (.063±.006) 1.60±0.15 (.063±.006) 4 Resistance Tolerance:
c 0.30±0.20 (.012±.008) 0.30±0.20 (.012±.008) K = ±10%, J = ±5%
d 0.40±0.15 (.016±.006) 0.20±0.15 (.008±.006)
t 0.60±0.10 (.024±.004) 0.50±0.10 (.020±.004) 5 Packaging:
p 0.8 typ (.031) 0.8 typ (.031) B = Bulk (1,000 pcs/bag)
e1 0.50±0.15 (.020±.006) ————— T = Taping (5,000 pcs/reel)
e2 ————— 0.60±0.15 (.024±.006)
Please contact Kyocera for specifications not covered in this catalog.

4 elements 4 elements 4 elements 4 elements

CRA3A4E series CRB2A4E series CRB3A4E series CRC3A4E series
C d b d C d C d
e1 e1 e1 e1 e2

W W W W
Style C
t P t P t
P P t
L L L L

W 1.60±0.15 (.063±.006) 1.0±0.10 (.039±.004) 1.60±0.15 (.063±.006) 1.60±0.15 (.063±.006)

L 3.20±0.15 (.126±.006) 2.0±0.10 (.079±.004) 3.20±0.15 (.126±.006) 3.20±0.15 (.126±.006)
c 0.30±0.20 (.012±.008) 0.20±0.15 (.008±.006) 0.30±0.20 (.012±.008) 0.30±0.20 (.012±.008)
d 0.20±0.15 (.008±.006) 0.25±0.15 (.010±.006) 0.40±0.15 (.016±.006) 0.20±0.15 (.008±.006)
t 0.50±0.10 (.020±.004) 0.40±0.10 (.016±.004) 0.60±0.10 (.024±.004) 0.50±0.10 (.020±.004)
p 0.8 typ (.031) 0.50±0.05 (.020±.002) 0.8 typ (.031) 0.8 typ (.031)
e1 0.45±0.15 (.018±.006) 0.25 typ (.010) ————— 0.45±0.15 (.018±.006)
e2 ————— ————— 0.50±0.15 (.020±.006) 0.60±0.15 (.024±.006)
b ————— 0.15 typ (.006) ————— —————
Specifications
8 elements Chip Resistor CRB2A/CRB1A/CRC1A RNA4A Series
RNA4A8E series Arrays CRA3A/CRB3A/CRC3A
L
P D F2 A2 T Ratings Series
E1 E2
Style B1 B2 W Rated 1/16W
power (70°C) 1/16W (0.0625W / element)
F1 A1 Maximum
W 2.10±0.15 (.083±.008) working 50V 25V
L 4.00±0.15 (.157±.006) voltage
T 0.60±0.10 (.024±.004) Maximum
A1 0.50±0.10 (.020±.004) over-load 100V 50V
A2 0.40±0.10 (.016±.004) voltage
B1 0.25±0.15 (.010±.006) Nominal
B2 0.40+0.15 (.016±.004) resistance 10Ω ~ 2.2MΩ 10Ω ~ 220KΩ
E1 0.50±0.10 (.020±.004) value range
E2 0.50±0.10 (.020±.004) Resistance
F1 0.30±0.15 (.012±.006) J: ±5% J: ±5%
tolerance
F2 0.35±0.15 (.014±.006)
D 0.30 typ. (.012) Working
temperature -55°C ~ +125°C -55°C ~ +125°C
P 0.80 typ. (.031) range
Chip Jumper Arrays TCR -250 ~ +250 ppm/°C -250 ~ +250 ppm/°C
Item Rating
Rated current 1A
Conductive resistance value 50 MΩ max. Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #096. Visit our website http://www.avxcorp.com

96
Resistor
Mini-Resistor Axial Leads

HOW TO ORDER
D
HR01 104 J
1 2 3
C 1 AVX Style
2 Resistance:
First two digits are the significant figures
A B of resistance.
The third digit indicates the number of
additional zeros.
Example: 2R2 = 2.2Ω
100 = 10Ω
Dimensions: millimeters (inches) 104 = 100,000Ω
106 = 10,000,000Ω
Tolerance
A 1.91 (0.075) ±.005 3 Tolerance: J=±5%, K=±10
B 0.91 (0.036) ±.005
C 0.91 (0.036) ±.005
D 0.20 (0.008) ±.001

Temperature Coefficient of Resistance Resistance Ranges

HR01 HR01
Tolerance J K Tolerance J K
(±5%) (±10%) (±5%) (±10%)
Resistance 10Ω 1MΩ 2.2Ω 10Ω 1MΩ 10Ω 2.2Ω
Range ∫ ∫ ∫ ∫ ∫ Value
to to
1MΩ 2.2MΩ 10Ω 1MΩ 10MΩ Range 2.2MΩ 10MΩ
TCR -500 -100 -500
(ppm/°C) ±250 ∫ ∫ ±250 ∫
+300 +600 +300

Resistor Ratings for HR01

Power 0.063 (1/16) w
Voltage 50V max.
-55°C to +70°C no derating
Working
+70°C to +125°C with derating

Marking
Three digit identification code
Example: 47 x 103 = 47000 Ω = 47 kΩ
0 : 0 Ω (Jumper)
100 : 10 Ω
102 : 1 kΩ
105 : 1 MΩ
Note: > 225 is K tolerance, ≤ 225 is J tolerance

473

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #097. Visit our website http://www.avxcorp.com

97
Thick Film Chip Trimmer Potentiometers
CVR-32 / CVR-42 / CVR-43 Series
HOW TO ORDER
CVR 4 3 C - 223 S W 1 u
1 234 5 6 78 9
1 Chip Trimmer Potentiometer
2 Size: 4 = 4mm, 3 = 3mm
3 Terminal Number:
2 = 2 terminals
3 = 3 terminals (except for CVR-3)
4 Circuit Type:
A = Voltage adjustment
C = Current adjustment (except for CVR-3)
5 Nominal Resistance Value:
3 digits (2 significant digits and 1 number of zeros)
Standard Values 6 Adjustment Method:
S = Standard
Style Full Resistance Value Code
G = Automatic
(Ω, kΩ, MΩ) (a) (b)
R = Bottom (CVR-43 only)
CVR-u u u-101 100Ω 1 1
CVR-u u u-151 150Ω A 1 7 Packaging:
CVR-u u u-201 200Ω 1 B = Bulk
2
CVR-u u u-221 220Ω 1 W = Taping (W direction)
CVR-u u u-301 300Ω 3 1
X = Taping (X direction) option
CVR-u u u-331 330Ω 8 Standard Quantity per Package:
CVR-u u u-471 470Ω 4 1 CVR42, 43: 1 = 1,000 pcs, 5 = 5,000 pcs
CVR-u u u-501 500Ω 5 1 CVR32: 2 = 2,000 pcs, 5 = 5,000 pcs, 0 = 10,000 pcs
CVR-u u u-681 680Ω 6 1 9 Others
CVR-u u u-102 1.0kΩ 1 2
CVR-u u u-152 1.5kΩ A 2 Rating
CVR-u u u-202 2.0kΩ Rating
2 2
CVR-u u u-222 2.2kΩ Specifications
CVR-4 Series CVR-3 Series
CVR-u u u-302 3.0kΩ 3 2 Rated Power 0.2W (70°C) 0.1W (70°C)
CVR-u u u-332 3.3kΩ
CVR-u u u-472 4.7kΩ 4 2 Rated Voltage 100V 50V
CVR-u u u-502 5.0kΩ 5 2 Resistance
CVR-u u u-682 6.8kΩ 6 2 Value 100Ω~2.2MΩ 100Ω~2.2MΩ
CVR-u u u-103 10kΩ 1 3 Resistance
CVR-u u u-153 15kΩ A 3 Tolerance ±30% ±30%
CVR-u u u-203 20kΩ Resistance Change
2 3
CVR-u u u-223 22kΩ Linearity Straight line “B” Straight line “B”
CVR-u u u-303 30kΩ Rotation Life (20 rotations) ±15% (20 rotations) ±15%)
3 3
CVR-u u u-333 33kΩ Torque 20~200g•cm 20~200g•cm
CVR-u u u-473 47kΩ 4 3
Rotation Angle 270°±20° 270°±20°
CVR-u u u-503 50kΩ 5 3
CVR-u u u-683 68kΩ 6 3 Operating Temp -40°C~+100°C -40°C~+100°C
CVR-u u u-104 100kΩ 1 4 T.C.R. ±250 ppm/°C ±250 ppm/°C
CVR-u u u-154 150kΩ A 4
CVR-u u u-204 200kΩ Code
2 4 (2)
CVR-u u u-224 220kΩ (a) (b) Code (a) Code (b)
CVR-u u u-304 300kΩ (The first two significant figures) (10 logarithmic multiplier)
3 4
CVR-u u u-334 330kΩ Sign Value Sign Value
CVR-u u u-474 470kΩ 4 4
1 10 1 101
CVR-u u u-504 500kΩ 5 4
A 15 2 102
CVR-u u u-684 680kΩ 6 4
CVR-u u u-105 1.0MΩ 1 5 2 20, 22 3 103
(1) (3)
CVR-u u u-155 1.5MΩ A 5 3 30, 33 4 104
CVR-u u u-205 2.0MΩ Type
2 5 Marking 4 47 5 105
CVR-u u u-225 2.2MΩ 5 50
( Left
Both side (1)&(3). . .circuit type A )
side (1) only. . .circuit type C
6 68
Example (a) 4 (b) 3 " 47 x 103 = 47 kΩ

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #098. Visit our website http://www.avxcorp.com

98
Thick Film Chip Trimmer Potentiometers
CVR-32 / CVR-42 / CVR-43 Series
Dimensions:
Circuit Equivalent
Item Dimensions
Type Circuit (Unit:mm)
Contact Point
(Face) (Back) 3.8±0.2 Marking Ceramic 0.4 2.0
(1) (3) (a) Substrate

A type
(b)
0.6
[3.55 1.25
[1.5 3.0
(2) 4.3±0.2 1.2
Solder
Pad 1.1
0.55 0.8
(1) (3) (0.25) (0.25)

C type
2.7 (0.3)
0.64±.08
1.8±0.2 Rotor
0.64±.08
0.64±.08
(2) 0.64±.08
CVR-43 Auto 0.64±.08

Contact Point Ceramic

(3) 0.4
(1) Marking Substrate
A type
3.8±0.2 Rotor 1.9±0.1
(a) (b) Terminal

(2) [3.55 1.5 2.2

[1.5 3.0
4.5±0.2 1.5
Solder
(1) (3)
C type

Pad
0.55 2.7 (0.3) 0.8 1.20 (0.8)
CVR-42 Auto (2)
1.8±0.2 Rotor 1.05 1.05
3.8±0.2 2.2max
Ceramic 2.2
(1) (3) (b) 0.3 Substrate
A type

(a)
Screw 0.4 0.6
0.4±0.1 for
Adjust- 1.25
4.3±0.2 f2.0 f1.8
(2) ment 1.2
Solder
1.1
Pad
(1) (3) 0.8 (0.25) (0.25)
C type

(0.3)
2.8±0.2 Rotor 0.64±.08
1.6±0.2 0.64±.08
0.64±.08
(2) 0.64±.08
CVR-43 Reverse 0.64±.08
3.8±0.2 2.2max
(3) Ceramic
(1) 2.0
A type

(b) 0.3 Substrate

(a)
0.6
0.4±0.1
1.25
(2) 4.3±0.2
1.2
Solder
1.1
Pad
C type

(1) (3) 0.8 (0.25) (0.25)

(0.3)
2.8±0.2 Rotor 0.64±.08
1.6±0.2 0.64±.08
0.64±.08
(2)
0.64±.08
CVR-43 Standard 0.64±.08
(1) (3) 3.8±0.2
1.9±0.1
A type

Rotor
(a) (b) Terminal Ceramic
Substrate
1.5 2.2
(2)
4.5±0.2 1.5
(1) (3) 0.4±0.1
Solder
C type

Pad

2.8±0.2 (0.3)
0.8
1.20 (0.8)
CVR-42 Standard (2)
1.6±0.2
Rotor
1.05 1.05
Ceramic
3.0±0.1 Substrate 1.5 max
(1) (3) 1.2±0.1 0.75 Rotor
(a)
A type

(b)
Rotor
Terminal 0.6
Rotor
[2.8±0.1 1.2
(2) 3.7±0.1
Solder 1.0
0.4±0.1 Pad 0.9
0.8 ±0.1
Type 1.2
CVR-32 Standard 2.0±0.1 Marking
0.8±0.1 0.8±0.1
0.75
0.5±0.1

Ceramic
3.0±0.1 Substrate 1.2
Terminal
A type

(1) (3)
2

1.8
3.7±0.2
1.2
[2.9

1.8
1.0
0.9
(2) Solder
2.3 Rotor 0.8 Pad
1.0
CVR-32 Auto 1.7 max
0.8 0.8

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #099. Visit our website http://www.avxcorp.com

99
Transient Voltage Suppressors
TransGuard® Surface Mount
HOW TO ORDER
l
V C 1206 05 D 150 R
12 3 4 5 6 7
1 Product Designator: V = Varistor (TransGuard®)
T W 2 Case Designator: C = Chip
3 Case Size Designator
L 4 Working Voltage:
Where: 03 = 3.3VDC; 14 = 14.0VDC; 30 = 30.0VDC;
05 = 5.6VDC; 18 = 18.0VDC; 48 = 48.0VDC;
09 = 9.0VDC; 26 = 26.0VDC; 60 = 60.0VDC
5 Energy:
Where: A = 0.1J; D = 0.4J; G = 0.9J; K = 2.0J;
B = 0.2J; E = 0.6J; H = 1.2J; V = 0.02J;
C = 0.3J; F = 0.7J; J = 1.5J; X = 0.05J
6 Clamping Voltage:
Where: 100 = 10.0V; 200 = 20.0V; 560 = 56.0V;
101 = 100.0V; 300 = 30.0V; 580 = 58.0V;
121 = 120.0V; 390 = 39.0V; 620 = 62.0V;
150 = 15.5V; 400 = 40.0V; 650 = 65.0V;
7 Standard Packaging
(Pcs/Reel): Style D R T
VC0402 – 4,000 10,000
VC0603 1,000 4,000 10,000
VC0805 1,000 4,000 10,000
VC1206 1,000 4,000 10,000
VC1210 1,000 2,000 10,000
Voltage and Dimensions: millimeters (inches)
Case Size 0402 0603 0805 1206 1210
Voltages 5.6, 9.0, 14.0 3.3, 5.6, 9.0, 14, 18, 26 3.3, 5.6, 9, 12, 14, 18, 26 3.3, 5.6, 14, 18, 26, 30 18, 26, 30, 48
or 18VDC or 30VDC or 30VDC or 48VDC or 60VDC
Actual Size
Length (L) 1.00±0.10 (.040±.004) 1.6±0.15 (.063±.006) 2.01±0.2 (0.79±.008) 3.20±0.2 ( .126±.008) 3.20±0.6 ( .126±.008)
Width (W) .50±0.10(.020±.004) 0.8±0.15 (.032±.006) 1.25±0.2 (.049±.008) 1.60±0.2 (.063±.008) 2.49±0.2 (.098±.008)
Thickness (T) .60 max. (.024) 0.9 max. (.035) 1.02 max. (.040) 1.70 max. (.067) 1.70 max. (.067)
Land Length (l) - - 0.71 max. (.028) 0.71 max. (.028) 0.71 max. (.028)
Termination Band Width .25±0.15 (.010±.006) .035±0.15 (.014±.006) - - -
Termination Separation .30 (0.12) min. 0.7 (.028) min. - - -
Termination Finish* Pt/Pd/Ag Pt/Pd/Ag Pt/Pd/Ag Pt/Pd/Ag Pt/Pd/Ag
*For Ni terminations contact factory.

0402 Surface Mount

AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Units Volts (max.) Volts Volts (max.) Amp. (max.) Joules (max.) pF (typ.) nH (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1MHz
VC040205X150 5.6 7.6 ~ 9.3 15.5 20 0.05 360 <1
VC040209X200 9.0 11.0 ~ 14.0 20.0 20 0.05 230 <1
VC040214X300 14.0 16.5 ~ 20.3 30.0 20 0.05 120 <1
VC040218X400 18.0 22.9 ~ 28.0 40.0 20 0.05 90 <1
0603 Surface Mount
AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Units Volts (max.) Volts Volts (max.) Amp. (max.) Joules (max.) pF (typ.) nH (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1kHz 1MHz
VC060303A100 3.3 4.1 ~ 6.0 10 30 0.1 1800 1230 <1.0
VC060305A150 5.6 7.6 ~ 9.3 15.5 30 0.1 1000 825 <1.0
VC060309A200 9.0 11.0 ~ 14.0 20 30 0.1 650 550 <1.0
VC060314A300 14.0 16.5 ~ 20.3 30 30 0.1 500 425 <1.0
VC060318A400 18.0 22.9 ~ 28.0 40 30 0.1 275 225 <1.0
VC060326A580 26.0 31.0 ~ 38.0 58 30 0.1 200 160 <1.0
VC060330A650 30.0 37.0 ~ 46.0 65 30 0.1 175 150 <1.0
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #100.
Visit our website http://www.avxcorp.com

100
Transient Voltage Suppressors
TransGuard® Surface Mount (continued from pg. 100)
0805 Surface Mount
AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Volts Volts Amp. Joules pF nH
Units (max.) Volts (max.) (max.) (max.) (typ.) (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1kHz 1MHz
VC080503A100 3.3 4.1 ~ 6.0 10 40 0.1 1300 930 <1.5
VC080503C100 3.3 3.7 ~ 5.6 10 120 0.3 5500 4000 1.5
VC080505A150 5.6 7.6 ~ 9.3 15.5 40 0.1 1250 860 <1.5
VC080505C150 5.6 7.1 ~ 8.7 15.5 120 0.3 3500 2400 1.5
VC080509A200 9 11.0 ~ 14.0 20 40 0.1 780 585 <1.5
VC080512A250 12 14.0 ~ 18.3 25 40 0.1 525 400 <1.5
VC080514A300 14 16.5 ~ 20.3 30 40 0.1 375 280 <1.5
VC080514C300 14 15.9 ~ 19.4 30 120 0.3 1100 820 1.5
VC080518A400 18 22.9 ~ 28.0 40 30 0.1 350 275 <1.5
VC080518C400 18 22.5 ~ 27.5 40 100 0.3 650 500 1.5
VC080526A580 26 31.0 ~ 37.9 58 30 0.1 140 110 <1.5
VC080526C580 26 30.5 ~ 37.3 58 100 0.3 250 190 1.5
VC080530A650 30 37.0 ~ 46.0 65 30 0.1 100 80 <1.5

1206 Surface Mount

AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Volts Volts Amp. Joules pF nH
Units (max.) Volts (max.) (max.) (max.) (typ.) (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1kHz 1MHz
VC120603A100 3.3 4.1 ~ 6.0 10 40 0.1 2000 1500 <1.7
VC120603D100 3.3 3.7 ~ 5.6 10 150 0.4 4700 3800 1.7
VC120605A150 5.6 7.6 ~ 9.3 15.5 40 0.1 1200 870 <1.7
VC120605D150 5.6 7.1 ~ 8.7 15.5 150 0.4 3000 2300 1.7
VC120614A300 14 16.5 ~ 20.3 30 40 0.1 600 500 <1.7
VC120614D300 14 15.9 ~ 19.4 30 150 0.4 1200 900 1.7
VC120618A400 18 22.9 ~ 28.0 40 30 0.1 350 270 <1.7
VC120618D400 18 22.5 ~ 27.5 40 150 0.4 800 635 1.7
VC120626D580 26 30.5 ~ 37.3 58 120 0.4 550 450 1.7
VC120630D650 30 36.0 ~ 45.0 65 120 0.4 500 400 1.7
VC120648D101 48 56.0 ~ 68.0 100 100 0.4 225 185 1.7

1210 Surface Mount

AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Volts Volts Amp. Joules pF nH
Units (max.) Volts (max.) (max.) (max.) (typ.) (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1kHz 1MHz
VC121018J390 18 21.5 ~ 26.5 39 500 1.5 3100 2400 2.0
VC121026H560 26 29.7 ~ 36.3 56 300 1.2 2150 1675 2.0
VC121030G620 30 35.0 ~ 43.0 62 220 0.9 1900 1530 2.0
VC121030H620 30 35.0 ~ 43.0 62 280 1.2 1975 1575 2.0
VC121048G101 48 54.5 ~ 66.5 100 220 0.9 500 430 2.0
VC121048H101 48 54.5 ~ 66.5 100 250 1.2 525 450 2.0
VC121060J121 60 67.0 ~ 83.0 120 250 1.5 450 375 2.0
See note page 103

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #101. Visit our website http://www.avxcorp.com

101
Transient Voltage Suppressors
StaticGuard – ESD Protection for CMOS Systems
l D
Max.

Lead
Diameter

T W L
Max.

Lead Length
L Min.

HOW TO ORDER HOW TO ORDER

V C 08 LC 18 A 500 R V A 10 LC 18 A 500 R
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 AVX Style: V=Varistor (StaticGuard) 1 AVX Style: V=Varistor (StaticGuard)
2 Case Size: C=Chip 2 Case Size: A=Axial
3 Case Size Designator: 3 Case Size Designator:
CODE SIZE LENGTH WIDTH CODE LENGTH WIDTH
04=0402 1.00±0.1mm 0.5±0.1mm 10 4.32mm max. 2.54mm max.
(.039"±.004") (.020"±.004") (.170") (.100")
06=0603 1.60±0.15mm
(.063"±.006")
0.8±0.15mm
(.032"±.006")
4 Low Capacitance Design
08=0805 2.01±0.2mm 1.25±0.2mm 5 Working Voltage
(.079"±.008") (.049"±.008") 6 Energy Rating
12=1206 3.20±0.2mm
(.126"±.008")
1.60±0.2mm
(.063"±.008")
7 Clamping Voltage
4 Low Capacitance Design 8 Packaging (Pcs/Reel):
D = 1,000 pieces per reel
5 Working Voltage R = 3,000 pieces per reel
6 Energy Rating T = 7,500 pieces per reel
7 Clamping Voltage
8 Packaging (Pcs/Reel):
D = 1,000 pieces per reel
R = 4,000 pieces per reel
T = 10,000 pieces per reel
AVX Part Number Working Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VC Ipeak Etrans C IL
Units Volts (max.) Volts (max.) Amp. (max.) Joules (max.) pF (typ.) nH (typ.)
Test Condition <50µA 8/20µS† 8/20µs 10/1000µS 0.5Vrms @: 1MHz di/dt = 100 mA/ns
VC04LC18V500 ≤18V <50V 15 0.02 40 <1.0
VC06LC18X500 18V 50V 20 0.05 75 <1.0
VC08LC18A500 18V 50V 30 0.1 100 <1.0
VC12LC18A500 18V 50V 30 0.1 200 <1.0
VA10LC18A500 18V 50V 30 0.1 200 <1.0
See note page 105

StaticGuard ESD RESPONSE

IEC 1000-4-2 (8Kv Contact Discharge)
50

VC12LC18A500 VC08LC18A500
Clamping Voltage (V)

45

VC06LC18X500

40

35
VC04LC18V500

30
1 10 100 1000 10000
Number of ESD Strikes
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #102. Visit our website http://www.avxcorp.com

102
AntennaGuard 0402/0603
ESD Protection for Antennas
Catalog Part Numbers/Electrical Values HOW TO ORDER
AVX Working Capacitance Cap Inductance VC 04 AG 18 3R0 Y A 1 X X
Part Number Voltage Value Tolerance (Typical)
IL < 1 MHz di/dt = 1 2 3 4 5 678 9 0
100nA 0.5V RMS 0.1 A/nS 1 Varistor Chip
VC04AG183R0YA1 18 VDC 3 pF Maximum < 1.0 2 Chip Size: 04 = 0402, 06 = 0603
VC06AG183R0YA1 18 VDC 3 pF Maximum < 1.0
VC06AG18120YA1 18 VDC 12 pF Maximum < 1.0
3 Varistor Series: AntennaGuard
4 Working Voltage: (DC)
5 Capacitance: 3pF = 3R0, 12pF = 120
Physical Dimensions millimeters (inches)
6 Non-Std. Cap Tolerance: (Maximum)
7 Not Applicable
0402 0603
Length 1.0 (0.039") ±0.1 (0.004") 1.6 (0.063") ±0.15 (0.006") 8 Termination: 1 = PtPdAg
Width 0.5 (0.020") ±0.1 (0.004") 0.8 (0.031") ±0.15 (0.006") T = Plated Ni, and Solder
Thickness 0.6 Max. (0.024") 0.9 Max. (0.035") 9 Reel Size: 1 = 7", 3 = 10"
Termination
Band Width 0.25 (0.010") ±0.15 (0.006") 0.35 (0.014") ±0.15 (0.006")
0 Reel Quantity: A = 4,000 or 10,000
(i.e., 1A = 4,000, 3A = 10,000)
Termination
0.3 Min. (0.012") 0.7 Min. (0.028")
Separation

millimeters (inches)
Suppression Pad Dimensions
Device D1 D2 D3 D4 D5
0402 TransGuard 1.79 (0.070) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020)
0603 TransGuard 2.29 (0.090) 0.76 (0.030) 0.76 (0.030) 0.76 (0.030) 0.76 (0.030)
SOT23 Diode See Below

0.96
(0.037)
D2 0.96
(0.037)
D1
D3
2.0
(0.079)
D4
0.9
(0.035)
D5
0.8
(0.031) mm (inches)

0402/0603 IR Solder Pad Layout SOT23 - Solder Pad Layout

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #103. Visit our website http://www.avxcorp.com

103
Transient Voltage Suppressors
MultiGuard 2-Element TVS Arrays - 0508
ESD Protection for CMOS and Bi-Polar Systems
HOW TO ORDER
L
MG 05 2 S 14 A 300 T
P 1 2 3 4 5 6 7 8
S S 1 MultiGuard
2 Chip Size: 05=0508
3 Configuration: 2=2 Elements
T BL W
4 Style: S=Standard Construction
L=Low Capacitance
5 Working Voltage:
BW C/L 05=5.6V 14=14.0V
OF CHIP
C
L 9=9.0V 18=18.0V
Dimensions: millimeters (inches) 6 Energy Rating:
A=0.10 Joules X=0.05 Joules
L W T BW BL P S
2.01±0.2 1.25±0.2 1.02 MAX 0.41±0.1 0.18 +0.25 -0.08 0.76 REF 0.38±0.1
7 Clamping Voltage:
+.010
(.079±.008) (.049±.008) (.040 MAX) (.016±.004) (.007 -.003 ) (.030 REF) (.015±.004) 150=15.5V 400=40.0V
200=20.0V 500=50.0V
E
300=30.0V
Pad Layout Dimensions 8 Packaging (Pcs/Reel):
D D=1,000 T=10,000
A B C D E R=4,000
A 0.89 1.27 2.16 0.46 0.76
(.035) (.050) (.085) (.018) (.030)
B
C

Electrical Characteristics Per Element

AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Volts Volts Volts Amp. Joules pF nH
Units (max.) (max.) (max.) (max.) (typ.) (typ.)
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS 0.5Vrms @: 1MHz di/dt = 100mA/nS
MG052S05A150 5.6 6.8 - 9.3 15.5 30 0.1 825 <1.0
MG052S09A200 9.0 10.0 - 14.0 20 30 0.1 550 <1.0
MG052S14A300 14.0 14.7 - 20.3 30 30 0.1 425 <1.0
MG052S18A400 18.0 20.4 - 28.0 40 30 0.1 225 <1.0
MG052L18X500 ≤18.0 N/A 50 20 0.05 <75 <1.0
*Test Condition = <25µA

VWM—Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50µA leakage current
VB—Voltage across the device measured at 1mA DC current
VC—Maximum peak voltage across the varistor measured at a specified pulse current and waveform
†Transient Energy Rating Pulse Current & Waveform
.1 Joule 2A 8/20µS
.05 Joules 1A 8/20µS

I peak—Maximum peak current which may be applied with the specified waveform without device failure
ETrans—Maximum energy which may be dissipated with the specified waveform without device failure
C—Device capacitance measured with zero volt bias at 0.5Vrms and 1MHz
L—Device inductance measured with a current edge rate of 100mA/nS

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #104. Visit our website http://www.avxcorp.com

104
Transient Voltage Suppressors
MultiGuard 4-Element TVS Array - 0612
HOW TO ORDER
L
MG 06 4 S 14 A 300 T
X
S S
X
1 2 3 4 5 6 7 8
P
1 MultiGuard
2 Chip Size: 06=0612
T
3 Configuration: 4=4 Elements
4 Style: S=Standard Construction
BW C/L OF CHIP
L=Low Capacitance
C
L 5 Working Voltage:
05=5.6V 14=14.0V
09=9.0V 18=18.0V
BL 6 Energy Rating:
W A=0.10 Joules
X=0.05 Joules
7 Clamping Voltage:
150=15.5V 400=40.0V
200=20.0V 500=50.0V
300=30.0V
8 Packaging (Pcs/Reel):
D=1,000
R=4,000
T=10,000

Dimensions: millimeters (inches)

L W T BW BL P X S
3.20±0.2 1.60±0.2 1.22 MAX 0.41±0.1 0.18+0.25
-0.08 0.76 REF 1.14±0.1 0.38±0.1
(.126±.008) (.063±.008) (.048 MAX) (.016±.004) (.007+.010
-.003 ) (.030 REF) (.045±.004) (.015±.004)

Electrical Characteristics Per Element

AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VC VC Ipeak Etrans C IL
Volts Volts Volts Amp. Joules pF µ Amp
Units (max.) (max.) (max.) (max.) (typ.) (max.)
Test Condition <50µA 1nA DC 8/20µS† 8/20µs 10/1000µS 0.5Vrms @: 1MHz @VWM
MG064S05A150 5.6 7.6 - 9.3 15.5 30 0.1 825 <1.0
MG064S09A200 9.0 11.0 - 14.0 20 30 0.1 550 <1.0
MG064S14A300 14.0 16.5 - 20.3 30 30 0.1 425 <1.0
MG064S18A400 18.0 22.9 - 28.0 40 30 0.1 220 <1.0
MG064L18X500 ≤18.0* N/A 50 30 0.05 <75 <1.0
*Test Condition = <25µA

VWM—Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50µA leakage current
VB—Voltage across the device measured at 1mA DC current
VC—Maximum peak voltage across the varistor measured at a specified pulse current and waveform
†Transient Energy Rating Pulse Current & Waveform
.1 Joule 2A 8/20µS
.05 Joules 1A 8/20µS

I peak—Maximum peak current which may be applied with the specified waveform without device failure
ETrans—Maximum energy which may be dissipated with the specified waveform without device failure
C—Device capacitance measured with zero volt bias at 0.5Vrms and 1MHz
L—Device inductance measured with a current edge rate of 100mA/nS

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #105. Visit our website http://www.avxcorp.com

105
TransFeed 0805 Surface Mount Chip
AVX-TVS Protection and EMI Suppression
Within a Single SMT Component
Schematic Diagram Electrical Model HOW TO ORDER
IN OUT
IN OUT LS LS
V 2 F 1 05 A 150 Y 2 E D
RV C RP 1 2 3 4 5 6 7 89 0 s 11

RON
1 Varistor
LP
2 Chip Size: 2=0805
3 Feedthru Capacitor
4 Number of Elements
5 Voltage: 05=5.6V 14=14V
TransFeed Electrical Specifications 09=9.0V 18=18V
Part Vc Ip Cap DCR Feedthru 6 Energy Rating: X=0.05J
Number Vwm Vb 8x20µS 8x20µS Il Et 1MHz Ohms Current A=0.1J
@ 2A C=0.3J
V2F105A150Y2E 5.6 7.6 - 9.3 15.5 30 <50 µA 0.1 800 0.200 750 mA
7 Varistor Clamping Voltage:
V2F109A200Y2E 9.0 11.0 - 14.0 20.0 30 <40 µA 0.1 575 0.200 750 mA
150=15.5V 500=50.0V
V2F114A300Y2E 14.0 16.5 - 20.3 30.0 30 <30 µA 0.1 300 0.200 750 mA
200=20.0V 400=40.0V
V2F118A400Y2E 18.0 22.9 - 28.0 40.0 30 <25 µA 0.1 200 0.200 750 mA
V2F118X500Y3D <18.0 N/A <50.0* 20 <10 µA 0.05 <100 0.250 500 mA
300=30.0V
V2F105C150Y1F 5.6 7.1 - 8.7 15.5 120 <50 µA 0.3 2500 0.150 1 Amp 8 Capacitance Tolerance:
V2F109C200Y1F 9.0 10.5 - 13.5 20.0 120 <40 µA 0.3 1800 0.150 1 Amp 8=+50/-20% Y=+100/-50%
V2F114C300Y1F 14.0 15.9 - 19.4 30.0 120 <30 µA 0.3 900 0.150 1 Amp 9 DC Resistance:
V2F118C400Y1F 18.0 22.5 - 27.5 40.0 120 <25 µA 0.3 500 0.150 1 Amp 1=.150 Ohms 4=.300 Ohms
*Vc at 8x20µS @ 1A 2=.200 Ohms 6=.600 Ohms
3=.250 Ohms
0 Feedthru Current:
D=500 mA, E=750 mA, F=1.0 Amp
L
X
CL
s Packaging Code (Pcs/Reel):
1
1
S
D=1,000
BL
T W R=4,000
T=10,000

BW EW

Dimensions: millimeters (inches)

Size L W T BW BL EW X S
0805 2.01±0.20 1.25±0.20 0.76±0.08 0.46±0.10 0.18+0.25-0.08 0.25±0.13 1.02±0.10 0.23±0.05
(.079±.008) (.049±.008) (.030±.003) (.018±.004) (.007+.010-.003) (.010±.005) (.040±.004) (.009±.002)

4 Pad Layout 3 Pad Layout

T T
P Note: It is only necessary P
to ground one center
terminal. However,
AVX recommends that
P both side terminals be P
connected.
S W S W
INPUT OUTPUT INPUT OUTPUT

C L C L

Recommended Solder Pad Layout (Typical Dimensions) millimeters (inches)

Size T P S W L C
0805 3.45 (0.136) 0.51 (0.020) 0.76 (0.030) 1.27 (0.050) 1.02 (0.040) 0.46 (0.018)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #106. Visit our website http://www.avxcorp.com

106
Transient Voltage Suppressors
TransGuard® Axial Lead
HOW TO ORDER
D V A 1000 03 D 100 R
Max.
1 2 3 4 5 6 7
Lead
Diameter
1 Product Designator: V = Varistor (TransGuard®)
2 Case Designator: A = Axial
3 Case Size Designator
L
Max.
4 Working Voltage:
Where: 03 = 3.3VDC; 26 = 26.0VDC;
Lead Length 05 = 5.6VDC; 30 = 30.0VDC;
Min.
14 = 14.0VDC; 48 = 48.0VDC;
18 = 18.0VDC; 60 = 60.0VDC
5 Energy:
VA1000 VA2000 Where: A = 0.1J; D = 0.4J; G = 0.9J; K = 2.0J;
Body Length (L) = 4.32mm. 4.83mm B = 0.2J; E = 0.6J; H = 1.2J; V = 0.02J;
(170" Max.) (.190" Max.) C = 0.3J; F = 0.7J; J = 1.5J; X = 0.05J
Body Diameter (D) = 2.54mm 3.56mm Max. 6 Clamping Voltage:
(.100" Max.) (.140") Where: 100 = 10.0V; 300 = 30.0V;
Lead Diameter 0.51 ± .05mm 0.51 ± .05mm 101 = 100.0V; 400 = 40.0V;
(.020 ± .002) (.020 ± .002) 121 = 120.V; 580 = 58.0V;
Lead Length 25.4mm 25.4mm 150 = 15.5V; 650 = 65.0V2
(1" Min.) (1" Min.)
7 Standard Packaging (Pcs/Reel):
Style D R T
VA1000 1,000 3,000 7,500
VA2000 1,000 2,500 5,000
Axial Leaded Devices
AVX Part Number Working Voltage Breakdown Voltage Clamping Voltage Peak Current Transient Energy Capacitance Inductance
Symbol VWM VB VC Ipeak Etrans C L
Volts Volts Amp. Joules pF nH
Units (max.) Volts (max.) (max.) (max.) (typ.) (typ.)
0.5Vrms @:
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS di/dt = 100mA/nS
1kHz 1MHz
VA100003A100 3.3 4.1 ~ 6.0 10 40 0.1 1500 1100 3.5
VA100003D100 3.3 3.7 ~ 5.6 10 150 0.4 4700 3800 3.5
VA100005A150 5.6 7.6 ~ 9.3 15.5 40 0.1 1000 750 3.5
VA100005D150 5.6 7.1 ~ 8.7 15.5 150 0.4 2800 2150 3.5
VA100014A300 14 16.5 ~ 20.3 30 40 0.1 400 300 3.5
VA100014D300 14 15.9 ~ 19.4 30 150 0.4 1200 900 3.5
VA100018A400 18 22.9 ~ 28.0 40 40 0.1 350 270 3.5
VA100018D400 18 22.5 ~ 27.5 40 150 0.4 900 700 3.5
VA100026D580 26 30.5 ~ 37.3 58 120 0.4 700 550 3.5
VA100030D650 30 36.0 ~ 45.0 65 120 0.4 600 500 3.5
VA100048D101 48 56.0 ~ 68.0 100 100 0.4 200 165 3.5
VA200060K121 60 67.0 ~ 83.0 120 300 2.0 400 340 3.5

VWM—Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50µA leakage current
VB—Voltage across the device measured at 1mA DC current
VC—Maximum peak voltage across the varistor measured at a specified pulse current and waveform
†Transient Energy Rating Pulse Current & Waveform
.1 Joule 2A8/20µS
.2–.3 Joules 5A 8/20µS
≥.4Joules 10A 8/20µS

I peak—Maximum peak current which may be applied with the specified waveform without device failure
ETrans—Maximum energy which may be dissipated with the specific waveform without device failure
C—Device capacitance measured with zero volt bias at .5Vrms and 1kHz
L—Device inductance measured with a current edge rate of 100mA/nS
Dimensions: Millimeters (Inches)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #107. Visit our website http://www.avxcorp.com

107
Zinc Oxide Varistors
VE/VF Types – General Application (“M” Series)
HOW TO ORDER
D t
VE 09 M 0 0251 K DB
1 2 3 4 5 6 7
1 Type Code:
H VE = Selection by working voltage
VF = Selection by breakdown voltage
2 Size Code:
30 (1.18) min

VE Series: 07, 09, 13, 17, 24

VF Series: 05, 07, 10, 14, 20
3 Material Code:
M = Standard
4 Voltage Marking Code:
E 0 = VE Series
1 = VF Series
5 Voltage Code:
Dimensions millimeters (inches) VE Series: 1st digit: zero. 2nd & 3rd digit: 2
D significant figures of working voltage. 4th digit:
Maximum ø number of significant zeros to be added.
Type Type Ceramic coated H +10% E Example: 0750 = 75 V, 0301 = 300 V
diameter diameter max. –0.05 (.002) ± 0.8 (.031)
VF Series: 1st, 2nd & 3rd digits: significant fig-
VE07 VF05 5 (.196) 7 (.275) 10 (.394) 0.6 (.024) 5.08 (0.20)
VE09 VF07 7 (.275) 9 (.354) 12 (.472) 0.6 (.024) 5.08 (0.20)
ures of breakdown voltage. 4th digit: number
VE13* VF10* 10 (.393) 13* (.512) 16 (.630) 0.8* (.031) 7.62* (0.30) of significant zeros to be added.
VE17 VF14 14 (.551) 17 (.669) 20 (.787) 0.8 (.031) 7.62 (0.30) Example: 2050 = 205 V
VE24 VF20 20 (.787) 24 (.945) 27 (1.06) 0.8** (.031) 7.62 (0.30) 6 Tolerance Code:
K = ±10% (contact factory for ±5%)
* VE13 / VF10: For models with VRMS ≤ 320 V
7 Packaging Code:
other version/suffixes available with:
Please refer to fall catalog
E = 5.08 (0.20) Suffix:
Ø = 0.6 (.024) Bulk: HB
D = 12.5 (.492) max Tape: DA, DB, DC,
DD, DQ, ...

“M” Series Range Capability Dimensions: millimeters (inches)

Operating Breakdown Clamping Energy Max. Peak Typical Mean
Style Voltage Voltage Voltage Absorption Current Capacitance Power
Vrms 1mAdc (J) 1p (A) pF@1kHz Dissipation
(W)
VE07 14 min. 22 min. 43 min. 0.3 min. 100 min. 40 min. 0.01 min.
VF05 to 300 max. to 470 max. to 775 max. to 9.0 max. to 400 max. to 1050 max. to 0.10 max.
VE09 14 min. 22 min. 43 min. 0.9 min. 250 min. 80 min. 0.02 min.
VF07 to 420 max. to 680 max. to 1720 max. to 25.0 max. to 1200 max. to 1900 max. to 0.20 max.
VE13 14 min. 22 min. 43 min. 2.0 min. 500 min. 74 min. 0.05 min.
VF10 to 625 max. to 1000 max. to 1650 max. to 68.0 max. to 2500 max. to 4000 max. to 0.40 max.
VE17 14 min. 22 min. 43 min. 4.0 min. 1000 min. 165 min. 0.10 min.
VF14 to 625 max. to 1000 max. to 1650 max. to 130.0 max. to 4500 max. to 4000 max. to 0.60 max.
VE24 75 min. 120 min. 200 min. 40.0 min. 6500 max. 410 min. 0.80 max.
VF20 to 625 max. to 1000 max. to 1650 max. to 230.0 max. to 4200 max.
NB: VE Series - Allows ordering code to be built by specifying operating voltage.
VF Series - Allows ordering code to be built by specifying breakdown voltage.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #108. Visit our website http://www.avxcorp.com

108
Zinc Oxide Varistors
VE/VF Types for Heavy Duty Applications (“P” Series)
D t
HOW TO ORDER
VE 09 P 0 0251 K DB

H
1 2 3 4 5 6 7
1 Type Code:
30 (1.18) min

VE = Selection by working voltage

VF = Selection by breakdown voltage
2 Size Code:
E VE Series: 07, 09, 13, 17, 24
VF Series: 05, 07, 10, 14, 20
Dimensions millimeters (inches) 3 Material Code:
D P = Power Series
Maximum
Type Type Ceramic coated H t
ø
+10% E 4 Voltage Marking Code:
diameter diameter max. max. –0.05 (.002) ± 0.8 0 = VE Series
VE07 VF05 5 (.196) 7 (.275) 10 (.394) 0.6 (.024) 5.08 (0.20) 1 = VF Series
VE09 VF07 7 (.275) 9 (.354) 12 (.472) see 0.6 (.024) 5.08 (0.20) 5 Voltage Code:
VE13* VF10* 10 (.393) 13* (.512) 16 (.630) table 0.8* (.031) 7.62* (0.30) VE Series: 1st digit: zero. 2nd & 3rd digit:
VE17 VF14 14 (.551) 17 (.669) 20 (.787) 0.8 (.031) 7.62 (0.30)
VE24** VF20** 20 (.787) 24 (.945) 27 (1.06) 0.8** (.031) 7.62 (0.30) 2 significant figures of working voltage. 4th
* VE13 / VF10: For models with VRMS ≤ 320 V digit: number of significant zeros to be added.
other version/suffixes available with: Example: 0750 = 75 V, 0301 = 300 V
E = 5.08 (0.20) Suffix: VF Series: 1st, 2nd & 3rd digits: significant
Ø = 0.6 (.024) Bulk: HB figures of breakdown voltage. 4th digit: number
D = 12.5 (.492) max Tape: DA, DB, DC,
DD, DQ, ...
of significant zeros to be added.
**VE24 / VF20: For lead diameter = 1.0 (.039), Example: 2050 = 205 V
please consult us. 6 Tolerance Code:
Types VE 07/09 - VF 05/07 (VE13 - VF10 320 Vrms upon request) K = ±10% (contact factory for ±5%)
Leads Straight Kinked (type 1) Kinked (type 2) 7 Packaging Code:
Please refer to fall catalog
Dimensions
0.6 (.024) 0.6 (.024) 0.6 (.024) Packaging Quantities
5.08 (0.2)
Type Bulk AMMOPACK REEL
5.08 (0.2) 5.08 (0.2)

Packaging AMMOPACK REEL AMMOPACK REEL AMMOPACK REEL VE07 - VF05 all 1500 1500 1500
H/Ho = 16 ± 0.5 DA(*) DB(*) DQ(**) DR(**) D7(**) D5(**) VE09 - VF07 < 230 Vrms 1000 1500 1500
H/Ho = 18 -0/+2 DC(**) DD(**) DS DT D8 D6 VE09 - VF07 230 V ≤ Vrms ≤ 300 V 1000 1000 1000
Types VE 13/17 - VF 10/14 VE09 - VF07 > 300 Vrms 750 1000 1000
Leads Straight Kinked (type 1) Kinked (type 2)
VE13 - VF10 ≤ 230 Vrms 500 750 750
VE13 - VF10 230 V ≤ Vrms ≤ 300 V 500 500 500
VE13 - VF10 > 300 Vrms 500 — —
Dimensions VE17 - VF14 ≤ 230 Vrms 500 750 750
0.8 (.031) 0.8 (.031) 0.8 (.031) VE17 - VF14 230 V ≤ Vrms ≤ 300 V 500 500 500
VE17 - VF14 > 300 Vrms 500 — —
7.62 (0.3) 7.62 (0.3) 7.62 (0.3)
VE24 - VF20 250 — —
Packaging AMMOPACK REEL AMMOPACK REEL AMMOPACK REEL
H/Ho = 16 ± 0.5 EA(*) EN(*) EC(**) EF(**) EQ(**) ER(**)
H/Ho = 18 -0/+2 EB(**) ED(**) EG EH ES ET
(*) DA, DB, EA, EN suffixes are not available for varistors with VRMS 300V and
available only upon request. (**) Preferred versions according to IEC 286-2
“P” Series Range Capability Dimensions: millimeters (inches)
Operating Breakdown Clamping Energy Max. Peak Typical Mean
Style Voltage Voltage Voltage Absorption Current Capacitance Power
Vrms 1mAdc (J) 1p (A) pF@1kHz Dissipation
(W)
VE07 130 min. 205 min. 340 min. 8.5 min. 800 90 min. 0.01
VF05 to 230 max. to 360 max. to 595 max. to 16 max. to 55 max.
VE09 130 min. 205 min. 340 min. 17.5 min. 250 min. 0.02
VF07 to 230 max. to 360 max. to 595 max. to 32 max. 1750 to 140 max.
VE13 130 min. 205 min. 340 min. 35 min. 450 min.
VF10 to 230 max. to 360 max. to 595 max. to 65 max. 3500 to 250 max. 0.40
VE17 130 min. 205 min. 340 min. 70 min. 1000 min.
VF14 to 230 max. to 360 max. to 595 max. to 130 max. 6000 to 550 max. 0.60
VE24 130 min. 205 min. 340 min. 140 min. 2500 min. Additional information on this product is available from
VF20 to 230 max. to 360 max. to 595 max. to 250 max. 10,000 to 1500 max. 0.80 AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613
NB: VE Series - Allows ordering code to be built by specifying operating voltage. and request document #109. Visit our website
VF Series - Allows ordering code to be built by specifying breakdown voltage. http://www.avxcorp.com

109
Zinc Oxide Varistors
VN 32 Uncoated Disc Series
HOW TO ORDER
VN32 M 0 0461 K --
1 23 4 5 6
1 Type
2 Material
3
4 RMS Operating Voltage
5 Tolerance
6 Suffix

d
D t

Dimensions: millimeters (inches)

Type D d t
±1.5 ±1 max.
VN32M00251K- - 32 (1.26) 28 (1.10) 2.8 (.110)
VN32M02750K- - 32 (1.26) 28 (1.10) 3.1 (.122)
VN32M00321K- - 32 (1.26) 28 (1.10) 3.7 (.146)
VN32M00381K- - 32 (1.26) 28 (1.10) 4.4 (.173)
VN32M00421K- - 32 (1.26) 28 (1.10) 4.9 (.193)
VN32M00461K- - 32 (1.26) 28 (1.10) 5.5 (.217)
VN32M00511K- - 32 (1.26) 28 (1.10) 6.0 (.236)
VN32M00750K- - 32 (1.26) 28 (1.10) 6.6 (.260)
Marking
On packaging only
Remark
Discs of 14 mm and 20 mm available upon request.

Particular Characteristics
Max. operating Nominal voltage Clamping voltage Energy Max. peak current
voltage at 1 mA DC Vp(V) 1 surge with insulating coating
Type (10 x 1000 µs) (8 x 20 µs)
VRMS VDC VR W lp (kA)
(V) (V) (V) at 2.5 kA at 2.5 kA (J) 1 pulse 2 pulses
VN32M00251K- - 250 330 390 970 1100 200 25 15
VN32M02750K- - 275 369 430 1075 1230 260 25 15
VN32M00321K- - 320 420 510 1200 1380 300 25 15
VN32M00381K- - 380 500 610 1350 1550 350 25 15
VN32M00421K- - 420 560 680 1500 1700 400 25 15
VN32M00461K- - 460 615 750 1650 1900 450 25 15
VN32M00511K- - 510 675 820 1800 2070 500 25 15
VN32M00750K- - 575 730 910 2000 2300 550 25 15

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #110. Visit our website http://www.avxcorp.com

110
Zinc Oxide Varistors
VB 32 Blocks
HOW TO ORDER
Dimensions millimeters (inches) VB32 M 0 0421 K --
1 23 4 5 6
15...45°
5 (.197)
1 Type
2 Material
54 (2.13)
44 (1.73)
24 (.945)

40 (1.57)
3
4 RMS Operating Voltage
5 Tolerance

~
5 (.197) 6 Suffix
o 5.1 (.201)
20 (.787) 20 (.787)
44 (1.73)

Packaging
Bulk or three units per box (one for each phase)

Marking
Type
AC nominal voltage (EIA code)
Logo

Particular Characteristics
Max. operating Nominal voltage Clamping voltage Energy Max. peak current
voltage at 1 mA DC at 2.5 kA 1 surge with insulating coating
Type (10 x 1000 µs) (8 x 20 µs)
VRMS VDC VR Vp W lp (kA)
(V) (V) (V) (V) (J) 1 pulse 2 pulses
VB32M00251K- - 250 330 390 970 200 25 15
VB32M02750K- - 275 369 430 1075 260 25 15
VB32M00321K- - 320 420 510 1200 300 25 15
VB32M00381K- - 380 500 610 1350 350 25 15
VB32M00421K- - 420 560 680 1500 400 25 15
VB32M00461K- - 460 615 750 1650 450 25 15
VB32M00511K- - 510 675 820 1800 500 25 15
VB32M00750K- - 575 730 910 2000 550 25 15

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #111. Visit our website http://www.avxcorp.com

111
NTC SMD Thermistors
NC 12 - NC 20
NC 12 NC 20 HOW TO ORDER
IEC SIZE : 08-05 IEC SIZE : 12-06
NC 20 K0 0103 M BA
1 2 3 4 5
2 (.079) ± 0.3 (.012)
3.2 (.126) ± 0.4 (.016)
1 Type
1.25 (.049)
± 0.2 (.008)
1.6 (.063)
± 0.25 (.010) 2 Material Code*
0.5 (.020)
0.5 (.020) 3 Resistance
10,000 Ω
... 1.5 (.059)
... 1.3 (.051)
0.2 (.008) min 0.2 (.008) min
0.2 (.008) min 0.2 (.008) min
4 Tolerance
M = (±20%)
Silver – palladium – platinum metallization K = (±10%)
0.12 W max. at 25ºC 0.24 W max. at 25ºC J = (±5%)
2 mW/°C 4 mW/°C 5 Suffix: Packaging
5s 7s --: Bulk
BA: Super 8 plastic tape
Table of Values BE: Super 8 plastic tape (1/2 reel)
NC 12 NC 20
IEC SIZE : 08-05 IEC SIZE : 12-06
Rn at 25°C Material B (K) a at 25°C Rn at 25°C Material B (K) a at 25°C
(Ω) Code(1) (DB/B) (%/°C) (Ω) Code (1) (DB/B) (%/°C)
18 10 Marking:
22 12
27 15 On package only
33 18
39 KC 3470 (±5%) – 3.9 22
47 27 KC 3470 (±5%) – 3.9
56 33
68 39
82 47
100 56
68
120 82
150 100
180
220 120
270 150
330 180
390 220
470 270
560 MC 3910 (±5%) – 4.4 330
680 390 MC 3910 (±5%) – 4.4
820 470
1,000 560
1,200 680
1,500 820
1,800 1,000
2,200 1,200
2,700 1,500
3,300 1,800
3,900 2,200
4,700 J5 3480 (±5%) – 3.9 2,700 I 3250 (±5%) – 3.7
5,600 3,300
6,800 3,900
8,200 K 3630 (±5%) – 4.0 4,700 J 3480 (±5%) – 3.9
10,000 5,600
12,000 6,800
15,000 L 3790 (±3%) – 4.2 8,200
18,000 10,000 K 3630 (±5%) – 4.0
12,000
22,000 15,000
27,000 M 3950 (±3%) – 4.4
33,000 18,000 L 3790 (±3%) – 4.2
39,000 22,000
47,000 27,000
56,000 N 4080 (±3%) – 4.6 33,000 M 3950 (±3%) – 4.4
68,000 39,000
82,000 47,000
100,000 56,000
120,000 P 4220 (±3%) – 4.7 68,000 N 4080 (±3%) – 4.6
150,000 82,000
180,000 100,000
220,000 Q 4300 (±3%) -4.7 120,000
150,000
*See catalog for material resistance 180,000 P 4220 (±3%) – 4.7
temperature characteristics. 220,000
270,000
330,000
390,000 Q 4300 (±3%) – 4.7
470,000
560,000 Additional information on this product is available
680,000 R 4400 (±3%) – 4.8 from AVX’s catalog or AVX’s FAX Service.
820,000 Call 1-800-879-1613 and request document #112.
1,000,000
Visit our website http://www.avxcorp.com

112
NTC SMD Thermistors
With Nickel Barrier Termination NB 12 - NB 20 - NB 21
NB 21 NB 12 NB 20 HOW TO ORDER
IEC SIZE : 06-03 IEC SIZE : 08-05 IEC SIZE : 12-06
NB 20 K0 0103 M BA
2 (.079) ± 0.3 (.012) 3.2 (.126) ± 0.4 (.016)
1 2 3 4 5
1.6 (.063) ± 0.2 (.008)

0.8 (.031)
1.25 (.049) 1.6 (.063)
1 Type
± 0.2 (.008)
± 0.2 (.008)
0.5 (.020)
± 0.25 (.010)
0.5 (.020)
2 Material Code*
... 1.3 (.051) ... 1.5 (.059) 3 Resistance
0.2 (.008) min 0.2 (.008) min
0.2 (.008) min 0.2 (.008) min 0.2 (.008) min 0.2 (.008) min 10,000 Ω
4 Tolerance
Nickel Barrier M = (±20%)
0.07 W max. at 25ºC 0.12 W max. at 25ºC 0.24 W max. at 25ºC K = (±10%)
1 mW/°C 2 mW/°C 4 mW/°C J = (±5%)
4s 5s 7s 5 Suffix: Packaging
--: Bulk
BA: Super 8 plastic tape
BE: Super 8 plastic tape (1/2 reel)
Table of Values
NB 21 NB 12
NB 20
IEC SIZE : 06-03 IEC SIZE : 08-05
IEC SIZE : 12-06
Rn at 25°C Material B (K) a at 25°C Rn at 25°C Material B (K) a at 25°C
Rn at 25°C Material B (K) a at 25°C
(Ω) Code (1) (DB/B (1) ± 5%
(2) ± 3%)
(%/°C) (Ω) Code (1) (DB/B (1) ± 5%
(2) ± 3% ) (%/°C) (1) ± 5%
(Ω) Code (1) (DB/B (2) ± 3% ) (%/°C)
4,700 PC 4200 (1) – 4.7 18
4,700 J 3480 (1) – 3.9
22
10,000 J5 3480 (1) – 3.9 5,600
27
15,000 K 3630 (2) – 4.0 6,800 3480 (2) – 3.9
33
8,200
22,000 L 3790 (2) – 4.2 39 KC 3470 (1) – 3.9
47 10,000 K 3630 (1) – 4.0
47,000 M 3950 (2) – 4.4 56 12,000
100,000 N5 4160 (2) – 4.7 68 15,000
82 18,000 L 3790 (2) – 4.2
150,000 P 4220 (2) – 4.7 100 22,000
120 27,000
150 33,000 M 3950 (2) – 4.4
180 39,000
220 47,000
270
330 56,000
390 68,000 N 4080 (2) – 4.6
470 82,000
560 MC 3910 (1) – 4.4 100,000 N5 4160 (2) -4.7
680
820 120,000
1,000 150,000 P 4220 (2) – 4.7
1,200 180,000
1,500 220,000
1,800 270,000
2,200 330,000 Q 4300 (2) – 4.7
2,700 390,000
3,300 470,000
3,900 560,000
4,700 J 3480 (1) – 3.9 680,000
5,600 820,000 R 4400 (2) – 4.8
6,800 1,000,000
8,200 K 3630 (1) – 4.0
10,000
12,000
15,000 L 3790 (2) – 4.2
18,000
22,000
27,000 M 3950 (2) – 4.4
33,000
39,000
47,000 N 4080 (2) – 4.6
56,000
68,000
82,000 N5 4160 (2) -4.7
100,000
120,000 P 4220 (2) – 4.7
*See catalog for material resistance temperature 150,000
characteristics. 180,000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #113. Visit our website http://www.avxcorp.com

113
NTC Disc Thermistors
Accurate: NJ 28 - NI 28 - NK 20

ACCURATE HOW TO ORDER

NJ 28 NI 28 NK 20 NJ28 NA 0103 F --
Coated chip with phenolic Coated chip with epoxy Chip 1 2 3 4
resin + varnish
2.8 (.110) max 2.8 (.110) max 2.8 (.110) max
insulated leads
2.8 (.110) max
1 Type

0.75 (.030) ± 0.25 (.010)

NJ = Accurate non-insulated leads
NI = Accurate insulated leads
3 (.118) max

3 (.118) max
NK = Accurate Chip
2
35 (1.38) min
35 (1.38) min

Material Code*

(0 )
0)
25 69
.1
.....0.25 (.010)min

0. .0
3

± 75 (
Resistance

1.
0.4 (.016) +10 %
- 0.06 0.4 (.016) +10 %
- 0.06
1.75 (.069) ± 0.25 (0.10)
10 kΩ
4 Tolerance
±1%, ±2%, ±3% K = 1%
0.16 W (See Table)
3 mW/°C 3 mW/°C 2 mW/°C
8s 8s 6s
<2s

ACCURATE
Rn at 25°C (Ω) Material Code B (K) a at 25°C (%/°C)
2,000 KA 3625 ± 1% – 4.1
3,000 MA 3960 ± 0.5% – 4.5
5,000 MA 3960 ± 0.5% – 4.5
10,000 NA 4100 ± 1% – 4.6
20,000 PA 4235 ± 1% – 4.8
50,000 QA 4250 ± 1% – 4.8
100,000 RA 4380 ± 1% – 4.9

Table of Values
GENERAL PURPOSE
Rn at Material B (K) a at 25°C
(∆B/B (2) ± 3% )
(1) ± 5%
25°C (Ω) Code (%/°C)
47 F 2800 (1) – 3.2
68
100 G 3030 (1) – 3.4
150
220 H 3160 (1) – 3.5
330 I 3250 (1) – 3.7
470
680 J 3480 (1) – 3.9
1,000
1,500 K 3630 (1) – 4.0
2,200
3,300 L 3790 (2) – 4.2
4,700 M 3950 (2) – 4.4
6,800
10,000 N 4080 (2) – 4.6
15,000
22,000 P 4220 (2) – 4.7
33,000
47,000 Q 4300 (2) – 4.7
68,000
100,000 R 4400 (2) – 4.8
150,000
220,000 S 4520 (2) – 5.0
330,000
470,000 T 4630 (2) – 5.1
1,000,000 U 4840 (2) – 5.3
*See catalog for material resistance temperature characteristics.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #114. Visit our website http://www.avxcorp.com

114
NTC Disc Thermistors
General Purpose: ND 03 / ND 06 / ND 09

( D) ( T) HOW TO ORDER
ND 06 P0 0103 K --
1 2 3 4
3 (.118) max 1 Type
35 (.138) min

ND 03 = General Purpose
+10%
ND 06 = General Purpose
ø 0.6 (.024) -0.05
ND 09 = General Purpose
2 Material Code*
5.08 (.02) 3 Resistance
10 kΩ
Dimensions: mm (inches) 4 Tolerance
D Max T Max K = (±10%)
ND 03 3.5 (.138) 3.0 (.118)
ND 06 6.0 (.236) 4.0 (.157)
ND 09 9.5 (.375) 5.0 (.197)

GENERAL PURPOSE
Types ND 03 ND 06 ND 09
Finish Coated disc with phenolic resin Coated disc with phenolic resin Coated disc with phenolic resin
Standards

Marking On package only Nominal resistance Tolerance for ±5%, ±10% Nominal resistance Tolerance for ±5%, ±10%
Climatic category – – –
Operating temperature -55°C to +150°C -55°C to +150°C-55°C to +150°C -55°C to +150°C
Tolerance on Rn (25°C) 47Ω to 1MΩ: ±5%, ±10%, ±20% ±5%, ±10%, ±20% ±5%, ±10%, ±20%
1500Ω to 150 kΩ: ±3%
Maximum dissipation at 25°C 0.25 W 0.71 W 0.9 W
Thermal dissipation factor 5 mW/°C 7.1 mW/°C 9 mW/°C
Thermal time constant 10 s 22 s 30 s

Table of Values
ND 03 ND 06 ND 09
B (K) B (K) B (K)
Rn at 25°C (Ω) Material Code ∆B/B (1) ± 5% a at 25°C (%/°C) Rn at 25°C (Ω) Material Code (1) ± 5% a at 25°C (%/°C) Rn at 25°C (Ω) Material Code a at 25°C (%/°C)
(∆B/B (2) ± 3%) (∆B/B (2) ± 3% )
(1) ± 5%
( (2) ± 3% )

47 F 2800 (1) – 3.2 10 68

68 15 F 2800 (1) – 3.2 100 J 3480 (1) – 3.9
100 G 3030 (1) – 3.4 22 150
150 33 G 3030 (1) – 3.4 220 K 3630 (1) – 4.0
220 H 3160 (1) – 3.5 47 330 L 3790 (2) – 4.2
68 H 3160 (1) – 3.5
330 I 3250 (1) – 3.7 470
470 100 I 3250 (1) – 3.7 680 M 3950 (2) – 4.4
680 J 3480 (1) – 3.9 150 J 3480 (1) – 3.9 1,000
1,000 220 1,500 N 4080 (2) – 4.6
1,500 K 3630 (1) – 4.0 330 K 3630 (1) – 4.0 2,200 P 4220 (2) – 4.7
2,200 470 3,300
3,300 L 3790 (2) – 4.2 680 4,700
1,000 L 3790 (2) – 4.2 6,800 Q 4300 (2) – 4.7
4,700 M 3950 (2) – 4.4
6,800 1,500 M 3950 (2) – 4.4 10,000
15,000 R 4400 (2) – 4.8
10,000 N 4080 (2) – 4.6 2,200 N 4080 (2) – 4.6
15,000 3,300 22,000 S 4520 (2) – 5.0
22,000 P 4220 (2) – 4.7 4,700 33,000
33,000 6,800 P 4220 (2) – 4.7 47,000 T 4630 (2) – 5.1
47,000 10,000 68,000
Q 4300 (2) – 4.7
68,000 15,000 100,000 U 4840 (2) – 5.3
22,000 Q 4300 (2) – 4.7 150,000
100,000 R 4400 (2) – 4.8
150,000 33,000 R 4400 (2) – 4.8
220,000 S 4520 (2) – 5.0 47,000
68,000 S 4520 (2) – 5.0
330,000
470,000 T 4630 (2) – 5.1 100,000 T 4630 (2) – 5.1
1,000,000 U 4840 (2) – 5.3 150,000

*See catalog for material resistance temperature characteristics.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #115. Visit our website http://www.avxcorp.com

115
NTC Thermistors
Insulated Metal Case NM 06
Type NM 06 HOW TO ORDER
Disc thermistor, insulated metal
NM 06 P0 0103 M --
Finish
case for chassis mounting 1 2 3 4
1 Type

+10%
ø 0.6 (.024) - 0.05
± 0.1
5.5 (.216) 10 (.394) ± 0.1
DIMENSIONS:
2.5 (.098) ± 1
This type can
be delivered
2 Material Code
millimeters (inches) with fixing nut, P

(ISO) ø 4
add suffix WC
to the reference. (See table below)
35 (.138) 12.6 (.496)
3 Resistance
min max 10 kΩ
Marking Nominal resistance
Tolerance for ±10% 4 Tolerance
Operating temperature -55°C to +150°C M = (±20%)
Tolerance on Rn (25°C) ±10% ±20% K = (±10%)
0.8 W - without heat sink Rn at 25°C B (K)
(Ω) Material Code ( ∆B/B (1) ±5% ) α at 25°C (%/°C)
Maximum dissipation at 25°C 2 W - with heat sink (2) ±3%

Part mounted in the center of a brass plate 10

15 F 2800 (1) – 3.2
(dim.: 100 x 100 x 1 mm)
22 G 3030 (1) – 3.4
Thermal dissipation factor* 8 mW/°C: without heat sink 33
20 mW/°C: with heat sink 47 H 3160 (1) – 3.5
Thermal time constant Depending on cooling system 68
100 I 3250 (1) – 3.7
Test voltage to earth 380 Vrms (50 Hz)
150 J 3480 (1) – 3.9
220
*Typical value
330 K 3630 (1) – 4.0
470
680 L 3790 (2) – 4.2
1,000
NTC Leadless 1,500
2,200
M
N
3950 (2)
4080 (2)
– 4.4
– 4.6
Disc Thermistors 3,300
4,700
6,800 P 4220 (2) – 4.7
Types NR 10,000
Metallization 15,000 Q 4300 (2) – 4.7
22,000
33,000 R 4400 (2) – 4.8
Physical data (dim. in mm) 47,000 S 4520 (2) – 5.0
68,000
100,000 T 4630 (2) – 5.1
D E 150,000
220,000 U 4840 (2) – 5.3
330,000
Marking On package only / On parts upon request
Operating temperature -40°C to +200°C HOW TO ORDER
Custom - designed products defined with:
Values and tolerances D ± ∆D-R1 ± ∆R1/R1 at T1 NR55 - - 3002 - 99
E ± ∆E R2 ± ∆R2/R2 at T2, . . . 1 2
1 Type
DIMENSIONS: millimeters (inches)
Material B R1 ± DR1 T1 R2 ± DR2 T2 R3 ± DR3 T3
Types D E
Code (k) at T1 (°C) at T2 (°C) at T3 (°C)
NR 55 -- 3002 - 99 5.5 (.217) ± 0.5 (.020) 1.1 (.043) ± 0.4 (.016) N5 4160 1230 Ω ± 7.5% 40 160 Ω ± 5% 96.5 – –
NR 67 -- 3068 - 99 6.7 (.264) ± 0.5 (.020) 1.7 (.067) ± 0.3 (.012) N 4080 150 Ω ± 3.3% 100 51 Ω ± 5.3% 140 – –
NR 55 -- 3049 - 99 5.5 (.217) ± 0.5 (.020) 1.0 (.040) ± 0.2 (.008) N5 4160 107 Ω ± 2.9% 110 80.6 Ω ± 2.8% 120 – –
NR 55 -- 3046 - 99 5.5 (.217) ± 0.5 (.020) 1.3 (.051) ± 0.4 (.016) S 4520 48600 Ω± 7.5% 25 3210 Ω ± 5% 90 – –
NR 49 -- 3119 - 99 4.9 (.193) ± 0.3 (.012) 1.5 (.060) ± 0.4 (.016) M 3950 840 Ω ± 10% 37.8 84 Ω ± 5% 104.4 – –
NR 55 -- 3114 - 99 5.5 (.217) ± 0.4 (.016) 1.0 (.040) ± 0.2 (.008) P 4220 5000 Ω ± 10% 25 – – – –
NR 70 -- 3121 - 99 7.0 (.275) ± 0.3 (.012) 1.2 (.047) ± 0.2 (.008) L 3790 210 Ω ± 10% 40 40 Ω ± 7.5% 90 30 Ω ± 6.7% 100
NR 29 -- 3107 - 99 2.9 (.014) ± 0.3 (.012) 1.5 (.060) ± 0.3 (.012) K 3630 2050 Ω ± 6% 25 193 Ω ± 5.4% 96.5 – –
NR 55 -- 3122 - 99 5.5 (.217) ± 0.5 (.020) 1.5 (.060) ± 0.4 (.016) J 3480 210 Ω ± 5% 25 – – – –
NR 55 -- 3126 - 99 5.5 (.217) ± 0.5 (.020) 1.0 (.040) ± 0.2 (.008) P 4220 3340 Ω ± 10% 25 264 Ω ± 7% 90 107 Ω ± 7% 120
NR 47 -- 3116 - 99 4.7 (.185) ± 0.4 (.016) 1.2 (.047) ± 0.2 (.008) R 4400 33000 Ω ± 2% 25 – – – –
NR 49 -- 3113 - 99 4.9 (.193) ± 0.3 (.012) 1.2 (.047) ± 0.2 (.008) N 4080 1680 Ω ± 10% 40 382 Ω ± 6.7% 80 176 Ω ± 5% 105
NR 47 -- 3101 - 99 4.6 (.181) ± 0.3 (.012) 1.4 (.055) ± 0.3 (.012) J 3480 146 Ω ± 13% 40 22 Ω ± 10% 100 – –
NR 55 -- 3071 - 99 5.8 (.228) ± 0.3 (.012) 1.0 (.040) ± 0.2 (.008) L 3790 262 Ω ± 8.7% 40 120 Ω ± 10% 60 35.5 Ω ± 7.8% 100
NR 61 -- 3063 - 99 6.1 (.240) ± 0.3 (.012) 1.5 (.060) ± 0.3 (.012) N 4080 760 Ω ± 9.2% 50 130 Ω ± 8.5% 100 56.6 Ω ± 8.5% 130
NR 67 -- 3053 - 99 6.7 (.264) ± 0.4 (.016) 1.7 (.067) ± 0.3 (.012) N 4080 540 Ω ± 11% 60 144 Ω ± 7% 100 – –
NR 50 -- 3048 - 99 5.0 (.197) ± 0.5 (.020) 1.5 (.060) ± 0.5 (.020) J 3480 233 Ω ± 10% 25 13.3 Ω ± 7% 121 – –
NR 60 -- 3021 - 99 6.0 (.236) ± 0.5 (.020) 3.2 (.125) ± 0.3 (.012) P 4220 3640 Ω ± 3% 40 457 Ω ± 3% 96.5 – –
NR 55 -- 3016 - 99 5.5 (.217) ± 0.5 (.020) 1.1 (.043) ± 0.4 (.016) Q 4300 5500 Ω ± 9% 40 650 Ω ± 7.7% 96.5 – –

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #116. Visit our website http://www.avxcorp.com

116
NTC Inrush Current Limiters Thermistors
NF 08 - 10 - 13 - 15 - 20
Outline Drawings millimeters (inches) HOW TO ORDER
D e NF 13 AA 0509 M --
3mm max. Notes H1 1 2 3 4 5
H H1
1 Type
I 2 Inrush Current Limiters
LS

d
3 Resistance
5 kΩ
Straight leads Internal kink Y kink
(Suffix - - or HB) (Suffix HL or 1N) (Suffix HY or 2B) 4 Tolerance
Notes: In case of adding strength to the lead wire from the side, it may occur crack and fragment at a part
of pant leg.
M = (±20%)
* 0.6 mm copper wire and 5.08 mm leads spacing for those two types. 5 Suffix
Bulk, Straight leads (see illustration)
Dimensions millimeters (inches)
D max e max H max H1 max I min d LS
Suffixes for Bulk Packing
Type
mm mm mm mm mm ±0.02 mm ±0.8 mm - - •Straight leads 0.8 or 1 mm wire diameter and 7.62 lead
NF08* 9.5 (0.374) 5.0 (0.197) 13.0 (0.512) 16.0 (0.630) 30 (1.181) 0.6 (0.024) 5.08 (0.200) spacing
NF08 9.5 (0.374) 5.0 (0.197) 13.0 (0.512) 16.0 (0.630) 30 (1.181) 0.8 (0.031) 7.62 (0.030) HB •Straight leads 0.6 mm wire diameter and 5.08 lead spacing
NF10* 11.5 (0.453) 5.0 (0.197) 15.0 (0.591) 18.0 (0.709) 30 (1.181) 0.6 (0.024) 5.08 (0.200) HL •Internal kink 0.8 mm or 1 mm wire diameter and 7.62 lead
NF10 11.5 (0.453) 5.0 (0.197) 15.0 (0.591) 18.0 (0.709) 30 (1.181) 0.8 (0.031) 7.62 (0.300) spacing
NF13 15.0 (0.591) 6.0 (0.236) 18.0 (0.709) 22.0 (0.866) 30 (1.181) 0.8 (0.031) 7.62 (0.300) 1N •Internal kink 0.6 mm wire diameter and 5.08 lead spacing
NF15 17.0 (0.669) 6.0 (0.236) 20.0 (0.787) 24.0 (0.945) 30 (1.181) 1.0 (0.039) 7.62 (0.300) HY •Y kink 0.8 or 1 mm wire diameter and 7.62 lead spacing
NF20 22.0 (0.866) 6.0 (0.236) 25.0 (0.984) 29.0 (1.142) 30 (1.181) 1.0 (0.039) 7.62 (0.300) 2B •Y kink 0.6 mm wire diameter and 5.08 lead spacing
Ceramic Zero power Max steady Resistance
Disc resistance stade current at max current
General Characteristics ø (mm) R25°C (Ω) Iss max 25°C (A) Riss max (Ω)
08 5.0 2.9 0.20
Standard Maximum Max power Thermal Thermal time Heat Packing 8.0 2.3 0.30
Type tolerance** operating 25°C dissipation constant capacity bulk tape 10.0 2.1 0.37
% T°C Watts δth (mW/K) τC (s) H (mJ/K) √ √ 15.0 1.8 0.50
33.0 1.3 0.97
NF08* 20 -40 / +200 1.6 8 60 480 √ √ 08 5.0 3.4 0.20
NF08 20 -40 / +200 2.2 11 60 660 √ √ 8.0 2.7 0.30
10.0 2.5 0.37
NF10* 20 -40 / +200 2.0 10 75 750 √ - 15.0 2.1 0.50
NF10 20 -40 / +200 2.6 13 75 975 √ √ 33.0 1.5 0.97
10 2.5 4.5 0.10
NF13 20 -40 / +200 3.2 16 100 1600 √ √ 4.0 3.6 0.16
NF15 20 -40 / +200 4.1 20 115 2300 √ - 5.0 3.3 0.19
8.0 2.6 0.30
NF20 20 -40 / +200 5.0 25 160 4000 √ - 10.0 2.5 0.34
16.0 2.0 0.50
* 0.6 mm copper wire and 5.08 mm leads spacing for those two types. 20.0 1.9 0.59
** Other tolerances available: L: ±15, X: ±25% 25.0 1.7 0.69
50.0 1.4 1.07
80.0 1.1 1.60
120.0 1.0 1.90
10 2.5 5.2 0.10
4.0 4.1 0.16
5.0 3.8 0.19
8.0 3.0 0.30
10.0 2.8 0.34
16.0 2.3 0.50
20.0 2.1 0.59
25.0 2.0 0.69
50.0 1.6 1.07
80.0 1.3 1.60
120.0 1.2 1.90
13 2.5 5.7 0.10
5.0 4.2 0.19
7.0 3.7 0.24
8.0 3.6 0.25
10.0 3.3 0.30
15.0 2.8 0.41
22.0 2.3 0.61
33.0 2.2 0.70
40.0 2.0 0.80
60.0 1.9 0.95
15 1.3 8.9 0.05
1.5 8.3 0.06
2.5 6.6 0.09
3.0 6.1 0.11
4.0 5.5 0.13
5.0 4.9 0.17
6.0 4.7 0.19
7.0 4.3 0.22
8.0 4.2 0.24
10.0 3.7 0.30
12.0 3.5 0.33
16.0 3.0 0.44
20.0 3.1 0.43
25.0 2.8 0.53
33.0 2.5 0.66
40.0 2.3 0.80
47.0 2.3 0.74
20 1.0 11.4 0.04
2.5 7.8 0.08
4.0 6.4 0.13
5.0 5.9 0.15
10.0 4.3 0.28
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. 15.0 4.0 0.32
Call 1-800-879-1613 and request document #117. Visit our website http://www.avxcorp.com 33.0 3.1 0.52

117
PTC Disc Thermistors
Overload Protection: PE - PG
Types PE PG HOW TO ORDER
Leadless disc
Finish Coated disc for soldering or clamping PE 12 J N 0100 X - -
D e
1 2 3 4 5

3 max
1 Type
Metallization
4.5 mm ± 1mm

DIMENSIONS: millimeters (inches)

PE = Coated Disc
PG = Leadless Disc

30 min
d +- 0.05
10 %

D
e
2 Size
Marking
LS
Logo / Rated resistance On packaging only
3 Material
See Tables
Characteristics and Dimensions: millimeters (inches) 4 Voltage
30V / Switching Temperature: 130ºC B = 30V
Rn Int* It* Imo Ires
Reference ± 25% at 25°C at 25°C at 25°C
PE PG G = 130V
(Ω) (mA) (mA) (A) (mA) Dmax
4.2
emax
3.5
d
0.5
LS
5
Dmax
4
emax
1.5
N = 265V
5
P■03 PB 0130 X - - 13 100 200 0.7 40 (0.165) (0.138) (0.020) (0.197) (0.157) (0.059)
P■04 PB 0130 X - - 13 125 250 1.5 40 5.3 4.5 0.6 5 4.8 3 Rn
(0.209) (0.177) (0.024) (0.197) (0.189) (0.118)
7.2 4 0.6 5 6.5 2.5 10Ω
P■06 PB 0609 X - - 6 220 440 2 50
6
(0.165) (0.157) (0.024) (0.197) (0.256) (0.098)
P■08 PB 0409 X - - 4 300 600 3 60 9
(0.283)
4
(0.157)
0.6
(0.024)
5
(0.197)
8.2
(0.323)
2.5
(0.098)
Tolerance
P■10 PB 0259 X - - 2.5 400 800 4.3 70 11
(0.433)
4
(0.157)
0.6
(0.024)
5
(0.197)
10.2
(0.402)
2.5
(0.098)
X = (± 25%)
P■12 PB 0189 X - - 1.8 500 1000 5.5 80 13 4 0.8 7.6 12 2.5
(0.512) (0.157) (0.031) (0.299) (0.472) (0.098)
P■16 PB 0119 X - - 1.1 800 1600 8 100 17.5 4 0.8 7.6 16.5 2.5
(0.689) (0.157) (0.031) (0.299) (0.650) (0.098)

130V / Switching Temperature: 110ºC

Rn Int* It* Imo Ires PE PG
Reference ± 25% at 25°C at 25°C at 25°C
(Ω) (mA) (mA) (A) (mA) Dmax emax d LS Dmax emax
P■04 MG 0101 X - - 100 45 90 0.35 8 5.3 5 0.6 5 4.8 3.5
(0.209) (0.197) (0.024) (0.197) (0.189) (0.059)
P■04 MG 0700 X - - 70 50 100 0.4 8 5.3 4.5 0.6 5 4.8 3
(0.209) (0.177) (0.024) (0.197) (0.189) (0.118)
P■04 MG 0550 X - - 55 60 120 0.45 8 5.3 4.5 0.6 5 4.8 3
(0.209) (0.177) (0.024) (0.197) (0.189) (0.118)
P■04 MG 0350 X - - 35 75 150 0.5 8.5 5.3 4.5 0.6 5 4.8 3
(0.209) (0.177) (0.024) (0.197) (0.189) (0.118)
P■06 MG 0250 X - - 25 95 190 1 10 7.2 4.5 0.6 5 6.5 3
(0.283) (0.177) (0.024) (0.197) (0.256) (0.118)
P■06 MG 0150 X - - 15 125 250 1.3 10.5 7.2 4.5 0.6 5 6.5 3
(0.283) (0.177) (0.024) (0.197) (0.256) (0.118)
P■08 MG 0100 X - - 10 170 340 2 11.5 9 4.5 0.6 5 8.2 3
(0.354) (0.177) (0.024) (0.197) (0.323) (0.118)
P■10 MG 0709 X - - 7 210 420 2.8 14 11 4.5 0.6 5 10.2 3
(0.433) (0.177) (0.024) (0.197) (0.472) (0.118)
P■12 MG 0459 X - - 4.5 280 560 4.5 18 13 5 0.8 7.6 12 3
(0.512) (0.197) (0.031) (0.299) (0.472) (0.118)
P■16 MG 0309 X - - 3 400 800 7 25 17.5 5 0.8 7.6 16.5 3
(0.689) (0.197) (0.031) (0.299) (0.650) (0.118)
P■20 MG 0189 X - - 1.8 650 1300 11 30 22 5 0.8 7.6 21 3
(0.866) (0.197) (0.031) (0.299) (0.827) (0.118)

265V / Switching Temperature: 80ºC

Rn Int* It* Imo Ires PE PG
Reference ± 25% at 25°C at 25°C at 25°C
(Ω) (mA) (mA) (A) (mA) Dmax emax d LS Dmax emax
5.3 5 0.6 5 4.8 3.5
P■04 JN 0151 X - - 150 28 56 0.25 5 (0.209) (0.197) (0.024) (0.197) (0.189) (0.138)
P■04 JN 0101 X - - 100 35 70 0.25 5 5.3
(0.209)
5
(0.197)
0.6
(0.024)
5
(0.197)
4.8
(0.189)
3.5
(0.138)
Notes
P■06 JN 0700 X - - 70 40 80 0.5 5 7.2 5 0.6 5 6.5 3.5
(0.283) (0.197) (0.024) (0.197) (0.256) (0.138) *Int and It values are given for PE series only.
P■08 JN 0250 X - - 25 75 150 0.9 6 9 5 0.6 5 8.2 3.5
(0.354) (0.197) (0.024) (0.197) (0.027) (0.138) For PG series, these values strongly depend
P■10 JN 0150 X - - 15 110 220 1.5 7 11 5 0.6 5 10.2 3.5 on the assembly mode.
(0.433) (0.197) (0.024) (0.197) (0.402) (0.138)
P■12 JN 0100 X HB 10 135 270 2.2 8 13
(0.512)
5
(0.197)
0.6
(0.024)
5
(0.197)
12
(0.472)
3.5
(0.138)
■ = Use E for leaded disc; use G for leadless
P■12 JN 0100 X - - 10 150 300 2.2 8 13 5 0.8 7.6 12 3.5 disc
(0.512) (0.197) (0.031) (0.299) (0.472) (0.138)
P■16 JN 0609 X - - 6 200 400 3.5 12 17.5 6 0.8 7.6 16.5 4
(0.689) (0.236) (0.031) (0.299) (0.650) (0.157)
22 6 0.8 7.6 21 4 Rn = Nominal resistance at 25°C
P■20 JN 0379 X - - 3.7 300 600 5 16 (0.866) (0.236) (0.031) (0.299) (0.827) (0.157)
Int = Maximum non-tripping
265V / Switching Temperature: 120ºC current
Rn Int* It* Imo Ires PE PG
UL Reference ±
25%
at
25°C
at
25°C
at
(A) 25°C
It = Minimum tripping current
(Ω) (mA) (mA) (mA) Dmax emax d LS Dmax emax
* P■04 NN 0221 X - - 220 35 70 0.25 5 5.6 (0.220) 5 (0.197) 0.6 (0.024) 5 (0.197) 4.8 (0.189) 3.5 (0.059)
Imo = Maximum overload current
* P■04 NN 0151 X - - 150 45 90 0.25 5 5.6 (0.220) 5 (0.197) 0.6 (0.024) 5 (0.197) 4.8 (0.189) 3.5 (0.059) Ires = Residual current at V max
* P■06 NN 0121 X - - 120 52 104 0.5 6 7.2 (0.283) 5 (0.197) 0.6 (0.024) 5 (0.197) 6.5 (0.256) 3.5 (0.059)
* P■06 NN 0101 X - - 100 58 116 0.5 6 7.2 (0.283) 5 (0.197) 0.6 (0.024) 5 (0.197) 6.5 (0.256) 3.5 (0.059) (typical value)
* P■06 NN 0700 X - - 70 65 130 0.5 6 7.2 (0.283) 5 (0.197) 0.6 (0.024) 5 (0.197) 6.5 (0.256) 3.5 (0.059)
* P■06 NN 0680 X - - 68 65 130 0.5 6 7.2 (0.283) 5 (0.197) 0.6 (0.024) 5 (0.197) 6.5 (0.256) 3.5 (0.059)
* P■08 NN 0550 X - - 55 80 160 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0470 X - - 47 85 170 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0450 X - - 45 85 170 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0350 X - - 35 90 180 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0330 X - - 33 90 180 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0250 X - - 25 100 200 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■08 NN 0220 X - - 22 105 210 0.9 8 9.0 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) 8.2 (0.323) 3.5 (0.059)
* P■10 NN 0150 X - - 15 135 270 1.5 9 11.5 (0.453) 5 (0.197) 0.6 (0.024) 5 (0.197) 10.2 (0.402) 3.5 (0.059)
* P■12 NN 0100 X HB 10 180 360 2.2 10 13.5 (0.209) 5 (0.197) 0.6 (0.024) 5 (0.197) 12 (0.472) 3.5 (0.059)
* P■12 NN 0100 X - - 10 225 450 2.2 12 13.5 (0.209) 5 (0.197) 0.8 (0.031) 7.6 (0.299) 12 (0.472) 3.5 (0.059) Additional information on this product is
* P■16 NN 0689 X - - 6.8 300 600 3.5 16 17.5 (0.689) 6 (0.236) 0.8 (0.031) 7.6 (0.299) 16.5 (0.650) 4 (0.157) available from AVX’s catalog or AVX’s FAX
* P■16 NN 0609 X - - 6 310 620 3.5 16 17.5 (0.689) 6 (0.236) 0.8 (0.031) 7.6 (0.299) 16.5 (0.650) 4 (0.157) Service. Call 1-800-879-1613 and request
* P■20 NN 0479 X - - 4.7 400 800 5 20 22 (0.866) 6 (0.236) 0.8 (0.031) 7.6 (0.299) 21 (0.827) 4 (0.157)
* P■20 NN 0379 X - - 3.7 460 920 5 20 22 (0.866) 6 (0.236) 0.8 (0.031) 7.6 (0.299) 21 (0.827) 4 (0.157)
document #118. Visit our website
http://www.avxcorp.com

118
PTC Disc Thermistors
Telecommunications Series: PE - PS
D e HOW TO ORDER
PE 10 - - 0020 - - -
Packaging: on tape and reel. 1 2
Quantity: 1500 parts per reel.
1 Type
d +10 %
- 0.05
2 TPC P/N
LS

Characteristics and Dimensions: millimeters (inches)

Vmax Rn Tolerance
Reference Dmax emax d LS Finish
Rms (Ω) on Rn
+10%
PS 06 N - 0005 - - - 130 70 -15% 6.4 (0.252) 4 (0.157) 0.6 (0.024) 5 (0.197) Uncoated
+10%
PS 06 N - 0015 - - - 245 70 -15% 6.4 (0.252) 4 (0.157) 0.6 (0.024) 5 (0.197) Uncoated

PS 10 - - 0019 - - - 245 16 ±25% 11 (0.433) 4.5 (0.177) 0.6 (0.024) 5 (0.197) Coated

PS 10 - - 0020 - - - 245 10 ±20% 11 (0.433) 4.5 (0.177) 0.6 (0.024) 5 (0.197) Coated

PS 08 - - 0021 - - -* 245 25 ±15% 8.3 (0.327) 4 (0.157) 0.6 (0.024) 5 (0.197) Uncoated

PS 08 - - 0022 - - - 245 25 ±25% 9 (0.354) 5 (0.197) 0.6 (0.024) 5 (0.197) Coated

*per reel DR = 1 Ω max
Individual data sheet: upon request

Industrial and Automotive HOW TO ORDER

PE PS PG
Resin-coated disc Uncoated disc Leadless disc PE 06 - - 1020 - - -
D e 1 2
D e

35
(1.38) 1 Type
min.

5.08 (0.2)
Ø0.6 (.024) +10%
-0.05 (.02)
2 TPC P/N

Overload Protection – Delayed Switching

Diam. Thick. Vmax R25°C DR25°C Tb Int It Imo Ires tb
Type (D) max. (e) max. (V) (Ohms) (%) (°C) (mA) (mA) (A) (mA) (s)
mm (inches) mm (inches)
PE 06 - - 1020 - - - 6.5 (0.256) 3 (0.118) 30 3.0 25 140 400 600 4.5 50 0.260
PE 04 - - 1019 - - - 5 (0.197) 3 (0.118) 30 6.0 25 140 270 400 2.5 45 0.230
PE 06 - - 1021- - - 8 (0.315) 5 (0.197) 30 8.2 20 115 180
PE 08 - - 1031 - - - 9 (0.354) 3.5 (0.138) 80 9.4 25 110 150 300 1.3 20 ≤3
PE 04 - - 1032 - - - 6.5 (0.256) 3.5 (0.138) 40 125 25 110 40 80 0.35 8

Time Delay For Lighting

Diam. Thick. Vmax R25°C DR25°C Tb Int It Imo Ires tb
Type (D) max. (e) max. (V) (Ohms) (%) (°C) (mA) (mA) (A) (mA) (s)
mm (inches) mm (inches)
PE 04 JN 0151 X - - 5.3 (0.209) 5 (0.197) 265 150 25 80 28 56 0.25 5
PE 04 JN 0101 X - - 5.3 (0.209) 5 (0.197) 265 100 25 80 35 70 0.25 5
PE 04 - - 1041 - - - 6.5 (0.256) 5 (0.197) 420 600 25 120 20 40 0.2

Heating Elements And Thermostats –

Measurement And Control
Diam. Thick. Vmax R25°C DR25°C T1 R1 T2 R2 T3 R3
Type (D) max. (e) max. (V) (Ohms) (%) (°C) (Ohms) (°C) (Ohms) (°C) (Ohms)
mm (inches) mm (inches)
8.0 + 0.5 1.0 +-.0.1
0.2 (0.009)
(0.004) 30 8.0 25 105 <2R25°C 115 >2R25°C
PG 08 - - 1008 - - - (0.04)
(0.315 + 0.020)
8.0 + 0.5 1.0 ± 0.1
PG 08 - - 1017 - - - 30 8.0 25 75 <2R25°C 85 >2R25°C
(0.315 + 0.020) (0.04 ± 0.004)
+ 0.2 (0.009)
8.0 + 0.5 1.2 -.0.1 (0.004)
PG 08 - - 1015 - - - (0.315 + 0.020)
12.5 16 90 <50 110 >1 k 125 >20 k
(0.047)
7 2.5
PS 06 - - 1005 - - - 30 12.5 20 50 <2R25°C 60 >2R25°C 100 >1 k
(0.276) (0.098)
4.7 ± 0.3 1.05 ± 0.3
PS 04 - - 1009 - - - 80 25.0 25 95 <2R25°C 105 >2R25°C
(0.185 ± 0.012) (0.041 ± 0.012)
Individual data sheet, marking, lead configuration, packaging, ... upon request.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #119. Visit our website http://www.avxcorp.com

119
Thin-Film Fuse
Accu-Guard II®- Surface Mount
Dimensions: millimeters (inches) HOW TO ORDER
F0805 B 1R00 F W TR
B
1 2 3 4 5
1 Style and Size: (Standard EIA chip sizes)
L2 2 Current Rating Code
W 3 F=Fast Fuse Speed
T
4 Termination: Ni/Solder (Sn 63, Pb 37)
5 Standard Packaging: Tape and reel
L (TR = 7"/3,000 pcs; TT = 13"/10,000 pcs)

0603 0805 1206

Marking Code* F2 H2 K2 12 P2 L2 22 V2 32
1.65±0.15 2.1±0.2 3.1±0.2
L (0.065±0.006) (0.083±0.008) (0.122±0.008) Rated Current (A) 0.25 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00
0.80±0.15 1.27±0.1 1.6±0.1
W *0805 only
(0.031±0.006) (0.050±0.004) (0.063±0.004)
0.70±0.15 0.9±0.2 1.2±0.2
T (0.028±0.006) (0.035±0.008) (0.047±0.008)
0.35±0.15 0.3±0.15 0.43±0.25
B
(0.014±0.006) (0.012±0.006) (0.017±0.010)

0603 Size
Current Resistance Voltage Drop Fusing Current Pre-Arc Rated
Part Number Rating @ 10% x I rated, 25°C @ 1 x I rated, 25°C (within 5 sec.) 25°C 12t @ 50A Voltage
A Ω (Max.) mV (Max.) A A2 - sec. V
F0603C0R15FWTR 0.15 1.75 (1.3 typ) 400 0.30 0.000004* 32
F0603C0R25FWTR 0.25 0.800 280 0.50 0.00003* 32
F0603C0R37FWTR 0.375 0.500 280 0.75 0.0001 32
F0603C0R50FWTR 0.50 0.320 280 1.00 0.0002 32
F0603C0R75FWTR 0.75 0.300 280 1.50 0.0015 32
F0603C1R00FWTR 1.00 0.200 240 2.00 0.004 32
F0603C1R25FWTR 1.25 0.170 240 2.50 0.007 32
F0603C1R50FWTR 1.50 0.110 240 3.00 0.012 32
F0603C1R75FWTR 1.75 0.090 240 3.50 0.02 24
F0603C2R00FWTR 2.00 0.075 240 4.00 0.03 24
F0603C2R50FWTR 2.50 0.055 200 5.00 0.05 16
F0603C3R00FWTR 3.00 0.045 200 6.00 0.1 16
*Current is limited to less than 50A at 32V due to internal fuse resistance.

0805 Size
Current Resistance Voltage Drop Fusing Current Pre-Arc Rated
Part Number Rating @ 10% x I rated, 25°C @ 1 x I rated, 25°C (within 5 sec.) 25°C 12t @ 50A Voltage
A Ω (Max.) mV (Max.) A A2 - sec. V
F0805B0R15FWTR 0.15 1.75 (1.3 typ) 400 0.30 0.000004 63
F0805B0R25FWTR 0.25 0.750 280 0.50 0.00003 63
F0805B0R50FWTR 0.50 0.350 280 1.00 0.0002 63
F0805B0R75FWTR 0.75 0.270 280 1.50 0.001 63
F0805B1R00FWTR 1.00 0.220 280 2.00 0.003 63
F0805B1R25FWTR 1.25 0.170 280 2.50 0.007 63
F0805B1R50FWTR 1.50 0.120 240 3.00 0.010 63
F0805B2R00FWTR 2.00 0.080 220 4.00 0.030 63
F0805B2R50FWTR 2.50 0.060 220 5.00 0.050 63
F0805B3R00FWTR 3.00 0.050 220 6.00 0.10 63

1206 Size
Current Resistance Voltage Drop Fusing Current Pre-Arc Rated
Part Number Rating @ 10% x I rated, 25°C @ 1 x I rated, 25°C (within 5 sec.) 25°C 12t @ 50A Voltage
A Ω (Max.) mV (Max.) A A2 - sec. V
F1206B0R25FWTR 0.25 0.750 280 0.50 0.00003 63
F1206B0R50FWTR 0.50 0.350 280 1.00 0.0002 63
F1206B1R00FWTR 1.00 0.180 240 2.00 0.003 63
F1206B1R50FWTR 1.50 0.120 240 3.00 0.010 63
F1206B2R00FWTR 2.00 0.080 220 4.00 0.030 63
F1206B3R00FWTR 3.00 0.050 220 6.00 0.10 63

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #120. Visit our website http://www.avxcorp.com

120
Thin-Film Fuse
Accu-Guard®- Surface Mount - Fast Speed
Dimensions: millimeters (inches) HOW TO ORDER
0.43±0.25
(0.017±0.010) B
F1206A 1R00 F W TR
1 2 3 4 5
1 Style and Size: (Standard EIA chip sizes)
W 1.6±0.1 2 Current Rating Code
(0.063±0.004)
1.2±0.2
3 F=Fast Fuse Speed
T
(0.047±0.008) 4 Termination: Ni/Solder (Sn 63, Pb 37)
L
3.1±0.2
5 Standard Packaging: Tape and reel
(0.122±0.008) (TR = 7"/3,000 pcs; TT = 13"/10,000 pcs.)

Current Resistance Voltage Drop Fusing Current Total Operating

Part Number Rating @ 10% x I rated, 25°C @ 1 x I rated, 25°C (within 5 sec.) 25°C 12t @ 50A
A Ω (Max.) mV (Max.) A A2 - sec.
F1206A0R20FWTR 0.200 0.95 350 0.40 0.00002*
F1206A0R25FWTR 0.250 0.75 280 0.50 0.00004*
F1206A0R37FWTR 0.375 0.40 220 0.75 0.00006
F1206A0R50FWTR 0.500 0.35 220 1.00 0.0002
F1206A0R75FWTR 0.750 0.25 220 1.50 0.003
F1206A1R00FWTR 1.000 0.18 220 2.00 0.005
F1206A1R25FWTR 1.250 0.15 220 2.50 0.009
F1206A1R50FWTR 1.500 0.11 220 3.00 0.02
F1206A1R75FWTR 1.750 0.10 210 3.50 0.035
F1206A2R00FWTR 2.000 0.065 160 4.00 0.04
*Current is limited to less than 50A at 32V due to internal fuse resistance.

Fuse Time – Current Characteristics

10
FUSE TOTAL OPERATING TIME, seconds

1 2.00A
1.75A
1.50A
10-1
1.25A
1.00A
10-2 0.75A

10-3
0.20A

10-4 0.25A

0.375A

10-5 0.50A

10-6
0.1 1 10 100
CURRENT (Amp.)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #121. Visit our website http://www.avxcorp.com

121
Thin-Film Directional Couplers
CP0805 Type
Dimensions: millimeters (inches) HOW TO ORDER
CP- 0805 A 0902 - A W
0805
L 2.03±0.1 1 2 3 4 5 6
(0.080±0.004)
1.55±0.1
1 Style: Directional Couplers
W (0.061±0.004) 2 Size: 0805
0.98±0.1
T (0.039±0.004) 3 Type: (see below)
A 0.56±0.25 4 Frequency: MHz
(0.022±0.010)
0.35±0.15 5 Sub Type: (see below)
B (0.014±0.006) 6 Termination: Nickel/Solder (Sn/Pb)
LAYOUT TYPE
Type A Sub-Type A Sub-Type B Sub-Type C Sub-Type D Sub-Type E
COUP 50 OHM COUP 50 OHM COUP 50Ω COUP 50Ω COUP 50Ω

IN OUT IN OUT IN OUT IN OUT IN OUT

Type B Note: All coupler types are designed to be used at any

Sub-Type A Sub-Type B Sub-Type C frequency within the 800MHz to 2500MHz range. The
part numbers listed are only examples for typical
IN COUP IN COUP IN COUP
applications.

Coupler Type : AE
OUT 50 OHM OUT 50 OHM OUT 50 OHM Part Frequency Coupling L Loss VSWR
Application
Number Band (MHz) (dB) [dB] max max
Coupler Type : AA AMPS CP0805A0836EW
CP0805A0881EW
824 ~ 849
869 ~ 894
11±1
10.5±1
Part Frequency Coupling L Loss VSWR GSM CP0805A0902EW 890 ~ 915 10.5±1
Application CP0805A0947EW 935 ~ 960 10±1 0.85 1.4
Number Band (MHz) (dB) max max
E-GSM CP0805A0897EW 880 ~ 915 10.5±1
GSM CP0805A0902AW 890 ~ 915 16±1 CP0805A0942EW 925 ~ 960 10±1
CP0805A0947AW 935 ~ 960 15.5±1 0.25dB 1.2
AMPS CP0805A0836AW 824 ~ 849 16.5±1 Coupler Type : BA
CP0805A0881AW 869 ~ 894 16±1 Frequency Coupling L Loss VSWR
Application Part
Coupler Type : AB Number Band (MHz) (dB) max max
PCN CP0805B1747AW 1710 ~ 1785 15.5±1 0.25dB
Part Frequency Coupling L Loss VSWR CP0805B1842AW 1805 ~ 1880 15±1
Application 0.3dB
Number Band (MHz) (dB) max max PCS CP0805B1890AW 1850 ~ 1910 15±1
GSM CP0805A0902BW 890 ~ 915 18±1 CP0805B1950AW 1930 ~ 1990 14.5±1 0.4dB 1.2
CP0805A0947BW 935 ~ 960 18±1 0.25dB 1.2 PHP CP0805B1907AW 1895 ~ 1920 15±1
0.3dB
AMPS CP0805A0836BW 824 ~ 849 19±1 DECT CP0805B1890AW 1880 ~ 1900 15±1
CP0805A0881BW 869 ~ 894 18.5±1 Wireless LAN CP0805B2442AW 2400 ~ 2484 13±1 0.4dB

Coupler Type : AC Coupler Type : BB

Frequency Coupling L Loss VSWR Part Frequency Coupling L Loss VSWR
Application Part Application
Number Band (MHz) (dB) [dB] max max Number Band (MHz) (dB) max max
AMPS CP0805A0836CW 824 ~ 849 14±1 PCN CP0805B1747BW 1710 ~ 1785 17±1
CP0805B1842BW 1805 ~ 1880 16.5±1
CP0805A0881CW 869 ~ 894 13.5±1
PCS CP0805B1890BW 1850 ~ 1910 16±1
GSM CP0805A0902CW 890 ~ 915 13.5±1
CP0805B1950BW 1930 ~ 1990 16±1 0.25dB 1.2
CP0805A0947CW 935 ~ 960 13±1 0.5 1.4 PHP CP0805B1907BW 1895 ~ 1920 16±1
E-GSM CP0805A0897CW 880 ~ 915 13.5±1 DECT CP0805B1890BW 1880 ~ 1900 16±1
CP0805A0942CW 925 ~ 960 13±1 Wireless LAN CP0805B2442BW 2400 ~ 2484 14±1
Coupler Type : AD Coupler Type : BC
Part Frequency Coupling L Loss VSWR Part Frequency Coupling L Loss VSWR
Application Application Number Band (MHz) (dB) max max
Number Band (MHz) (dB) [dB] max max
AMPS CP0805A0836DW 824 ~ 849 13 PCN CP0805B1747CW 1710 ~ 1785 18.5±1
CP0805A0881DW 869 ~ 894 12.5 CP0805B1842CW 1805 ~ 1880 18.5±1
PCS CP0805B1890CW 1850 ~ 1910 18±1
GSM CP0805A0902DW 890 ~ 915 12.5 CP0805B1950CW 1930 ~ 1990 17.5±1 0.25dB 1.2
CP0805A0947DW 935 ~ 960 12 0.5 1.4 PHP CP0805B1907CW 1895 ~ 1920 18±1
E-GSM CP0805A0897DW 880 ~ 915 12.5 DECT CP0805B1890CW 1880 ~ 1900 18±1
CP0805A0942DW 925 ~ 960 12 Wireless LAN CP0805B2442CW 2400 ~ 2484 16±1 0.4dB

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #122. Visit our website http://www.avxcorp.com

122
Thin-Film Directional Couplers
CP0603 Type
Dimensions: millimeters (inches) HOW TO ORDER
CP 0603 A 0836 A W
0603
L 1.6±0.1 1 2 3 4 5 6
W
L B
(0.063±0.004)
0.84±0.1
1 Style: Directional Couplers
W (0.033±0.004) 2 Size: 0603
0.60±0.1
T T (0.028±0.004) 3 Type: (see below)
B1 A 0.35±0.15
(0.014±0.006)
4 Frequency: MHz
A
B 0.175±0.1 5 Sub Type: (see below)
Top View Bottom View
(0.007±0.004)
0.00+0.1/-0.0
6 Termination: Nickel/Solder (Sn/Pb)
B1 (0.000+0.004/-0.0)
Terminals (Top View)

OUT 50 OHM

Coupler Part Number CP0603AxxxxAW IN COUPLING

Part Frequency Coupling L Loss VSWR
Application
Number Band (MHz) (dB) [dB] max max
AMPS CP0603A0836AW 824 ~ 849 18.5±1
CP0603A0881AW 869 ~ 894 18.5±1 0.25 Note: All coupler types are designed to
GSM CP0603A0902AW 890 ~ 915 18±1 1.2 be used at any frequency within
CP0603A0947AW 935 ~ 960 17.5±1 the 800MHz to 2500MHz range.
PDC CP0603A1441AW 1429 ~ 1453 14±1 0.3
PCN CP0603A1747AW 1710 ~ 1785 12.5±1
The part numbers listed are only
CP0603A1842AW 1805 ~ 1880 12±1 examples for typical applications.
PCS CP0603A1880AW 1850 ~ 1910 12±1
CP0603A1960AW 1930 ~ 1990 11.5±1 0.5 1.3
PHP CP0603A1907AW 1895 ~ 1920 12±1
DECT CP0603A1890AW 1880 ~ 1900 12±1
Wireless LAN CP0603A2442AW 2400 ~ 2484 10±1 0.8 1.3

Coupler Part Number CP0603AxxxxBW Coupler Part Number CP0603AxxxxDW

Part Frequency Coupling L Loss VSWR Part Frequency Coupling L Loss VSWR
Application Application
Number Band (MHz) (dB) [dB] max max Number Band (MHz) (dB) [dB] max max
AMPS CP0603A0836BW 824 ~ 849 16±1 AMPS CP0603A0836DW 824 ~ 849 15.5±1
CP0603A0881BW 869 ~ 894 15.5±1 0.25 CP0603A0881DW 869 ~ 894 15±1 0.35 1.2
GSM CP0603A0902BW 890 ~ 915 15.5±1 GSM CP0603A0902DW 890 ~ 915 14.5±1
CP0603A0947BW 935 ~ 960 15±1 CP0603A0947DW 935 ~ 960 14±1
PDC CP0603A1441BW 1429 ~ 1453 11.5±1 0.45 PDC CP0603A1441DW 1429 ~ 1453 10.5 0.55 1.3
PCN CP0603A1747BW 1710 ~ 1785 10±1 1.2 PCN CP0603A1747DW 1710 ~ 1785 9±1
CP0603A1842BW 1805 ~ 1880 9.5±1 CP0603A1842DW 1805 ~ 1880 8.5±1
PCS CP0603A1880BW 1850 ~ 1910 9±1 PCS CP0603A1880DW 1850 ~ 1910 8.5±1
CP0603A1960BW 1930 ~ 1990 9±1 0.8 CP0603A1960DW 1930 ~ 1990 8±1 0.9 1.5
PHP CP0603A1907BW 1895 ~ 1920 9±1 PHP CP0603A1907DW 1895 ~ 1920 8.5±1
DECT CP0603A1890BW 1880 ~ 1900 9±1 DECT CP0603A1890DW 1880 ~ 1900 8.5±1
Wireless LAN CP0603A2442BW 2400 ~ 2484 7.5±1 1.1 1.3 Wireless LAN CP0603A2442DW 2400 ~ 2484 6.5±1 1.4 1.5

Coupler Part Number CP0603AxxxxCW Coupler Part Number CP0603BxxxxAW

Part Frequency Coupling L Loss VSWR Part Frequency Coupling L Loss VSWR
Application Application
Number Band (MHz) (dB) [dB] max max Number Band (MHz) (dB) [dB] max max
AMPS CP0603A0836CW 824 ~ 849 21±1 AMPS CP0603B0836AW 824 ~ 849 24±1
CP0603A0881CW 869 ~ 894 20.5±1 0.25 1.2 CP0603B0881AW 869 ~ 894 24±1 0.2
GSM CP0603A0902CW 890 ~ 915 20.5±1 GSM CP0603B0902AW 890 ~ 915 23.5±1
CP0603A0947CW 935 ~ 960 20±1 CP0603B0947AW 935 ~ 960 23.5±1
PDC CP0603A1441CW 1429 ~ 1453 16.5±1 0.35 PDC CP0603B1441AW 1429 ~ 1453 20±1
PCN CP0603A1747CW 1710 ~ 1785 15±1 PCN CP0603B1747AW 1710 ~ 1785 18±1
CP0603A1842CW 1805 ~ 1880 14.5±1 CP0603B1842AW 1805 ~ 1880 18±1 0.25 1.2
PCS CP0603A1880CW 1850 ~ 1910 14.5±1 PCS CP0603B1880AW 1850 ~ 1910 17.5±1
CP0603A1960CW 1930 ~ 1990 14±1 0.5 1.3 CP0603B1960AW 1930 ~ 1990 17.5±1
PHP CP0603A1907CW 1895 ~ 1920 14.5±1 PHP CP0603B1907AW 1895 ~ 1920 17.5±1
DECT CP0603A1890CW 1880 ~ 1900 14.5±1 DECT CP0603B1890AW 1880 ~ 1900 17.5±1
Wireless LAN CP0603A2442CW 2400 ~ 2484 12.5±1 Wireless LAN CP0603B2442AW 2400 ~ 2484 15±1 0.4

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #123. Visit our website http://www.avxcorp.com

123
High Frequency Inductor
Accu-L® – Size 0805 – Surface Mount
Dimensions: HOW TO ORDER
0.25±0.15 L 0805 1R8 D EW TR
B
(0.010±0.006)
1 2 3 4 5 6
1 Type
1.5±0.1
2 EIA Chip Size
W
(0.059±0.004) 3 Inductance Code: (nH)
0.91±0.13 T
(0.036±0.005) 4 Tolerance:
L
C = ±0.2nH D = ±0.5 nH
2.11±0.1 G = ±2% J = ±5%
(0.083±0.004)
5 Termination: Ni/Solder (Sn 63, Pb 37)
6 Standard Packaging: Tape and reel
(7" = 3,000 pcs; 13" = 10,000 pcs.)
450 MHz 900 MHz 1700 MHz 2400 MHz
IDC max
Test Freq. Test Freq. Test Freq. Test Freq. SRF min RDC max
Part Number
(MHz) (Ω)
Inductance Q Q Q Q D15°C D70°C
L (nH) L (nH) L (nH) L (nH)
Tol. Typical Typical Typical Typical (1) (2)

L08051R2hEW ±0.2 ±0.5 nH 1.2 60 1.2 92 1.2 122 1.2 92 10000 0.05 1000 2000
L08051R5hEW ±0.2 ±0.5 nH 1.5 50 1.5 74 1.5 102 1.5 84 10000 0.05 1000 2000
L08051R8hEW ±0.2 ±0.5 nH 1.8 50 1.8 72 1.8 88 1.9 73 10000 0.06 1000 2000
L08052R2hEW ±0.2 ±0.5 nH 2.2 42 2.2 62 2.2 82 2.3 72 10000 0.07 1000 2000
L08052R7hEW ±0.2 ±0.5 nH 2.7 42 2.7 62 2.8 80 2.9 70 10000 0.08 1000 2000
L08053R3hEW ±0.2 ±0.5 nH 3.3 38 3.3 46 3.4 48 3.5 57 10000 0.11 750 1500
L08053R9hEW ±0.2 ±0.5 nH 3.9 27 3.9 36 4.0 38 4.1 42 10000 0.20 750 1500
L08054R7hEW ±0.2 ±0.5 nH 4.7 43 4.8 62 5.3 76 5.8 60 5500 0.10 750 1500
L08055R6hEW ±0.2 ±0.5 nH 5.6 50 5.7 68 6.3 73 7.6 62 4600 0.10 750 1500
L08056R8hEW ±0.2 ±0.5 nH 6.8 43 7.0 62 7.7 71 9.4 50 4500 0.11 750 1500
L08058R2hEW ±0.2 ±0.5 nH 8.2 43 8.5 56 10.0 55 15.2 32 3500 0.12 750 1500
L0805100hEW ±2%, ±5% 10 46 10.6 60 13.4 52 — — 2500 0.13 750 1500
L0805120hEW ±2%, ±5% 12 40 12.9 50 17.3 40 — — 2400 0.20 750 1500
L0805150hEW ±2%, ±5% 15 36 16.7 46 27.0 23 — — 2200 0.20 750 1000
L0805180hEW ±2%, ±5% 18 36 18.8 37 — — — — 1700 0.35 500 1000
L0805220hEW ±2%, ±5% 22 36 23.5 33 — — — — 1400 0.40 500 1000
h : C = ±0.2nH, D = ±0.5nH, G = ±2%, J = ±5%.
(1) IDC measured for 15°C rise at 25°C ambient temperature
(2) IDC measured for 70°C rise at 25°C ambient temperature

Inductance vs. Frequency (Typical) Q vs. Frequency (Typical)

100

100
80
1.8nH

5.6nH
60
Inductance (nH)

22nH
15nH Q
10 10nH 10nH
40
5.6nH
15nH
20
22nH
1.8nH

1 0
0.01 0.1 1 10 0.1 1 10
Frequency (GHz) Frequency (GHz)
Measured on Wiltron 360 Vector Analyzer Measured on Wiltron 360 Vector Analyzer

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #124. Visit our website http://www.avxcorp.com

124
KBR-Y kHz Band SMT Ceramic Resonators
KBR-Y Series ƒo: 380 to 1050kHz

HOW TO ORDER
KBR - 455 Y TR
1 2 3 4
1 Type: (Kyocera Bulk Resonator)
2 Oscillation Frequency: 380 to 1050 kHz
3 Resonator Type: Y = surface mountable
4 Standard Packaging: TR = tape and reel
(13" = 1000 pcs)

Specifications
Fig. A Fig. B Fig. C
Frequency Range 380 to 430kHz 440 to 525kHz 600 to 655kHz 795 to 815kHz 960 to 1050kHz

Frequency Tolerance ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%

Resonant Impedance 20Ω Max. 20Ω Max. 50Ω Max. 70Ω Max. 100Ω Max.

Anti-resonant Impedance 30kΩ Min. 35kΩ Min. 50kΩ Min. 70kΩ Min. 70kΩ Min.

Temperature Characteristics
(-20 to +80°C) ±0.3% ±0.3% ±0.3% ±0.3% ±0.3%

C1 100pF 100pF 100pF 100pF 100pF

C2 470pF 100pF 100pF 100pF 100pF

Test Circuit Dimensions: millimeters (inches)

VDD Fig. A Fig. B Fig. C
+5VDC Model Name
8.5 3.5 3.5
fosc (.138) 8.0 5.0 2.3
(.335) (.315) (.138) (.091)
Frequency (.197)
Date Frequency Date Frequency
1M Code Date
Code Code
9.0 5.0 9.0 5.0 6.3 2.5
(.354) (.197) 0.3 (.354) (.197) 0.3 (.248) (.098) 0.3
(.012) (.012) (.012)
C1 C2
IC : 4069 (HEX INVERTER) 0.6 0.6 0.6
(MOTOROLA) (.024) 0.7 (.024)
0.7 0.7 (.024) 0.7
(.028) 0.7 (.028) 0.6
(.028) (.028) (.028)
(.024)

Suggested Land Patterns Structure

380 to 430 kHz

440 to 525 kHz 795 to 815 kHz
High Temperature Resin Case
600 to 655 kHz 960 to1020 kHz

2.4 2.4
(.094) (.094)

1.5 1.5 1.4 1.4 Ceramic Element

(.059) (.059) (.055) (.055)
6.5 3.9
(.256) (.154) Outer Terminal

7unit: mm (inch)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #125. Visit our website http://www.avxcorp.com

125
kHz Band Leaded Ceramic Resonators
KBR -B, -BK, -F Series ƒo: 190 to 1050kHz
HOW TO ORDER
KBR - 455 BK TS
1 2 3 4
1 Type: (Kyocera Bulk Resonator)
2 Oscillation Frequency: 190 to 1020kHz
3 Resonator Types: B/BK = 190 to 680kHz
F = 795 to 1050kHz
4 Lead Style: Blank u = standard
TS = Single in-line
TL = formed lead
Specifications
Parameters Temperature
Frequency Frequency Resonant Anti-Resonant Standard Oscillating Case
Series C1 C2 Stability
Range Tolerance Impedance Impedance Frequency Color
Fig. (-20 ~ +80°C)
Fig. A 190 ~ 249KHz 25KΩ min 330pF 200KHz
B
Fig. B 250 ~ 379KHz 220pF 300KHz
30KΩ min 470pF
Fig. C 380 ~ 430KHz BK 400KHz
Fig. D 431 ~ 439KHz B 20Ω max -
Blue
Fig. E 440 ~ 525KHz BK 455,480,500KHz
Fig. F 526 ~ 539KHz B ±0.5% 35KΩ min ±0.3% -
540 ~ 599KHz 100pF 540,560KHz
Fig. E BK
600 ~ 655KHz 600,640KHz
50Ω max 50KΩ min 100pF
Fig. F 656 ~ 680KHz B 680KHz
795 ~ 815KHz 70Ω max 800KHz
Fig. G F 70KΩ min Green
960 ~ 1050KHz 100Ω max 1000KHz

Dimensions: millimeters (inches)

Fig. A Fig. B Fig. C Fig. D Fig. E Fig. F Fig. G
190 to 249kHz (B-Type) 250 to 379kHz (B-Type) 380 to 430kHz (BK-Type) 431 to 439kHz (B-Type) 440 to 525/540 to 655kHz 526 to 539/656 to 795 to 815/960 to
(Types: BK, AK, HK, AHK) 680kHz (B-Type) 1050kHz (F-type)
14.2 11.2 8.5 8.5 3.5
(.559) (.441) (.335) 8.0 Model Name Date Code 2.3 5.0
(.335) (.138) (.315) (.091)
8.0 (.197)
3.8(.150) K 3.8(.150) K 3.5(.138) 3.8(.150) K (.315)

Date Code 3.5 (.138)

Model Name Model Name Model Name Date Code Date Code
Date Code Model Name Model Name Date Code Model Name Date Code

13.5 9.0 9.0 8.0

16.5 8.5 (.315) 6.3
(.650) (.531) (.354) 0.8 (.335) (.354) 0.8
1.0 1.0 (.248)
(.039) (.039) (.031) 0.8 (.031)
(.031) 0.8 0.8
8.0 8.0 3.5(.138) (.031) (.031)
(.315) 4.5(.177) 4.5 (.177)
(.315) 3.5(.138)
3.5 (.138)
0.8 0.20 0.8 0.20 0.6 0.15 0.6 0.15
1.6 (.031) (.008) 1.6 (.008) 1.5 (.024) (.006) 0.6 0.15 1.5
(.031) (.059) 1.5 (.024) (.006) 0.6 0.15 (.059) (.024) (.006)
(.063) (.063) (.059) 1.5 0.6 0.2
(.059) (.024) (.006) (.024) (.008)

10.0 7.5 5.0 5.0 4.2

(.197) (.197) 5.0 5.0
(.394) (.338) (.197) (.197) 5.0 5.0 (.165)
(.197) 2.5
[TS] [TS] (.197)
(.098)
[TS]
unit: mm (inch)

Test Circuit
Lead Lead Shape Frequency Range
+5VDC
VDD
Type B-Type BK-Type F-Type
380 to 430 kHz 795 to 815 kHz
440 to 525 kHz 960 to 1050 kHz
1MV TS 540 to 655 kHz Single in-line is
standard for F Series
A* B* A* B* A* B*
C1 C2
190 to 379 kHz 3.0 3.0 380 to 430 kHz 3.5 5.0 795 to 815 kHz 1.9 1.9
C1, C2 : See Specifications
IC : 4069 (Hex Inverter)
TL A B
431 to 439 kHz 4.5 6.0 440 to 525 kHz 3.5 5.0 960 to 1050 kHz 1.9 1.9
(MOTOROLA) 526 to 539 kHz 4.5 6.0 540 to 655 kHz 3.5 5.0
656 to 680 kHz 4.5 6.0
*Dimensions in mm.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #126. Visit our website http://www.avxcorp.com

126
MHz Band SMT Resonators
PBRC-A Series ƒo: 2.00 to 8.00MHz

HOW TO ORDER
PBRC 4.00 A R
1 2 3 4
1 Type: (Piezo, Bulk Resonator, SMD)
2 Oscillation Frequency: (MHz)
3 Resonator Type: A = without capacitor
4 Packaging: R = tape and reel (10" = 2000 pcs.)

Specifications
Frequency Range 2.00 to 8.00MHz
Frequency Tolerance ±0.5%
200Ω Max. at 2.00 ~ 2.90MHz
Resonant Resistance 100Ω Max. at 3.00 ~ 3.57MHz
30Ω Max. at 3.58 ~ 8.00MHz
Temperature Characteristics
(-20 to +80°C) ±0.3%

Dimensions: millimeters (inches) Structure

Date Code 1.2 (.047)

Ceramic Case

3.58 2.6
(.102) 1 2 3.0
(.118)

7.4 (.291)
5.0
7.2 (.283) (.197)
Ceramic Element Electrode
2.0 Max Termination: nickel barrier with gold flash
(.079)
Conductive Paste
Alumina Ceramic Substrate
All dimensional tolerances = ±0.3mm
0.6
(.024)

Recommended Land Pattern Test Circuit

5.0mm (PBRC-j A)
(.197) VDD = 5.0V

14 MC14069UB
(MOTOROLA)
4.0mm 1 2 3 4 7
(.157)

R OUT GND
1.0MV
Resonator
1.7mm 1.7mm C1 C2
(.067) (.067) Unit: mm (inch) 33pF 33pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #127. Visit our website http://www.avxcorp.com

127
MHz Band SMT Resonators with
Built-in Capacitor
PBRC-B Series ƒo: 2.00 to 36.00MHz

HOW TO ORDER
PBRC 3.58 B R
1 2 3 4
1 Type: (Piezo, Bulk Resonator, SMD)
2 Oscillation Frequency: (MHz)
3 Resonator Type: B = with capacitor
4 Packaging: R = tape and reel (10" = 2000 pcs.)

Specifications
Frequency Range 2.00 to 8.00MHz 8.01 to 36.00MHz
Load Capacitor 33pF (typ.) 10pF (typ)
Frequency Tolerance ±0.5% ±0.7%
Resonant Resistance 30Ω Max. 150Ω Max.
Temperature Characteristics
(-20 to +80°C) ±0.3% ±0.1%

Dimensions: millimeters (inches) Pad Connection

Date Code 1.2 (.047)

1 3
3.58 2.6
(.102) 1 2 3 3.0
(.118)

7.4 (.291) 1. Input

2.5 2.5 2. Ground
7.2 (.283) (.098) (.098)
3. Output 2
2.0 Max Termination: nickel barrier with gold flash
(.079)

All dimensional tolerances = ±0.3mm

0.6
(.024) Note: Pads 1 and 3 are interchangeable.

Test Circuit
2.00 TO 8.00MHz 8.01 TO 36.00MHz
(PBRC-hB)
(PBRC-hB)
VDD = 5.0V
VDD = 5.0V

14 MC74HC04
14 MC14069UB (MOTOROLA)
(MOTOROLA)

1 2 3 4 7
1 2 3 4 7

R OUT
R OUT GND
GND 1.0MV
1.0MV

Resonator
Resonator
C1 C2
C1 C2
10pF 10pF
33pF 33pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #128. Visit our website http://www.avxcorp.com

128
MHz Band Leaded Ceramic Resonators
KBR, -M, -MS, -MSA, -MSB Series ƒo: 2.00 to 12.00MHz
HOW TO ORDER
KBR - 4.00 MSA TR
1 2 3 4
1 Type: (Kyocera Bulk Resonator)
2 Oscillation Frequency: (MHz)
3 Resonator Type: M = 6.01 to 12.00MHz
MS = 2.00 to 3.57MHz
MSA = 3.58 to 8.00MHz (Water Resistance)
MSB = 3.58 to 6.00MHz (No Clean)
4 Packaging: TR= tape and reel (14" = 2000 pcs)
Blank u = Bulk (2000 pcs)

Specifications
Series MS MSA/MSB M
Dimension Fig. A Fig. B Fig. C
Frequency Range 2.00 to 3.50MHz 3.51 to 8.00MHz 8.01 to 12.00MHz
Frequency Tolerance ±0.5% 0.5% ±0.5%
Resonant Resistance 100Ω Max. 30Ω Max. 40Ω Max.
Temperature Characteristics

KBR-3.58MSA - 200 Series for Telephone D.T.M.F. Applications

Temperature
Frequency Resonant
P/N Frequency Resistance Stability Dimensions
Tolerance
(-20 to +80°C)
KBR-3.58MSA-201 +0 -0.25%
KBR-3.58MSA-202 +0.15 -0.10%
KBR-3.58MSA-203 +0.30 -0.05%
KBR-3.58MSA-204 3.5795MHz +0.45 +0.20% 30Ω Max. ±0.3% Fig. B
KBR-3.58MSA-205 +0.60 +0.35%
KBR-3.58MSA-206 -0.30 -0.55%
KBR-3.58MSA-207 -0.15 -0.40%

Dimensions: millimeters (inches) Test Circuit

Fig. A Fig. B Fig. C
VDD
12.0 Max. Date of 12.0 Max.
(.472) Production Frequency (.394) Date of 10 Max.
Frequency (.394)
Frequency Production Date of
Production f osc

KBR 10.0 Max. KBR

10.0 Max. (.394) M R
MS (.394) 1.2 (.047) 1.2 (.047) RESONATOR
5.0
(.197)
1.2 (.047) 0.5 (.020) 0.6 (.024)
5.0
(.197)
0.6 (.024) 5.0 5.0 C1 C2
(.197) (.197)
5.0
(.197)
5.0 Max. 5.0 Max.
5.0 Max.
(.197) (.197) VDD : 5V (2.0-8MHz)
(.197)
12V (8.1-12MHz)
only M Series
7 Max.
(.276) R : 1MV
C1, C2 : 33pF
5.0 IC : 4069 (HEX INVERTER)
(.197) (MOTOROLA)
0.3 (.012) 0.2 (.008)

0.2 (.008)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #129. Visit our website http://www.avxcorp.com

129
High Frequency MHz Band Ceramic Resonators
KBR-MY, -MSA Series ƒo: 12.01 to 36.00MHz
HOW TO ORDER
KBR - 16.00 MY TR
1 2 3 4
1 Type: (Kyocera Bulk Resonator)
2 Oscillation Frequency: (MHz)
3 Resonator Type: MY = 12.01 to 15.90MHz
MSA = 16.00 to 36.00MHz
4 Standard Packaging: Blank u = Bulk (2000 pcs)
TR = tape and reel (14" = 2000 pcs)

Specifications
MY MSA
Frequency Range 12.01 to 15.90MHz 16.00 to 36.00MHz
Frequency Tolerance ±0.5% ±0.5%
Resonant Resistance 30Ω Max. 30Ω Max.
Temperature Characteristics
(-20 to +80°C) ±0.3% Max. ±0.3% Max.

Dimensions: millimeters (inches)

KBR-MY KBR-MSA
10.0 Max. 12.0 Max.
Frequency (.394) Date of
(.394) Frequency
Production
R
Date 10.0 Max.
Code (.394)
1.2 1.2 (.047)
(.047) 5.0
0.6 (.197)
(.024) 0.5 (.020)
5.0
(.197) 5.0
5.0 Max. (.197)
(.197)
5.0 Max.
10.0 Max. (.197)
(.394)

5.0
(.197)
0.2 (.008)

0.3 (.012)

Test Circuit
KBR-MY KBR-MSA

VDD = 5.0V VDD = 5.0V

14 MC74HC04 14 MC74HCU04
(MOTOROLA) (MOTOROLA)

1 2 3 4 7 1 2 3 4 7

OUT OUT
R GND R GND
1.0MV 1.0MV

Resonator Resonator
C1 C2 C1 C2
33pF 33pF 10pF 10pF

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #130. Visit our website http://www.avxcorp.com

130
Built-in Capacitor MHz Band Ceramic Resonators
KBR-MKC/MKD Series ƒo: 3.58 to 36.00MHz
HOW TO ORDER
KBR - 4.00 MKC TR
1 2 3 4
1 Type: (Kyocera Bulk Resonator)
2 Oscillation Frequency: (MHz)
3 Resonator Type: MKC = built-in capacitor (No Clean)
MKD = built-in capacitor (Water Resistance)
4 Standard Packaging: Blank u = Bulk (2000 pcs)
TR = tape and reel (14" = 2000 pcs)

Specifications
MKC/MKD MKD
Frequency Range 3.58 to 8.00MHz 16.00 to 36.00MHz
Frequency Tolerance ±0.5% ±0.5%
Resonant Resistance 30Ω 30Ω
Temperature Characteristics
(-20 to +80°C) ±0.5% ±0.3%

Dimensions: millimeters (inches)

3.45~8.0MHz(MKC Type) 3.45~8.0MHz(MKD Type) 16.0~36.0MHz(MKD Type)
10.0 max. 10.0 max.
10.0 max. (.394) 5.0 Max. 5.0 max.
5.0 max. (.394)
(.394)
8.0 max.
6.0 max. (.315) 9.5 max.
(.236) (.374)
5.0
5.0 0.5 (.197) 0.3 5.0
0.5 (.197) 0.3 (.012) 0.5 (.197) 0.3
(.012) (.020) (.012)
(.020) 1 2 3 (.020)
1 2 3 1,3 Input, Output 1 2 3
1,3 Input, Output 2 Ground 1,3 Input, Output
2 Ground 2.5 2.5
2.5 2.5 (No Polarity) (.098)(.098) (No Polarity) 2.5 2.5 2 Ground
(.098)(.098) (.098)(.098) (No Polarity)

Test Circuit Pin Connection

3.58~8.0MHz 16.0~36MHz
VDD 5V VDD 5V

fosc fosc 1 3

R R

1 3 1 3
1. Input
2. Ground
C1 C2 R : 1MV C1 C2 R : 1MV 3. Output
IC : MC14069 IC : MC74H404 2

C1, C2 : 33pF (Typ.) C1, C2 : 10pF (Typ.)

2 2
Note: Pins 1 and 3 are interchangeable.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #131. Visit our website http://www.avxcorp.com

131
SAW Resonators
PAR Series SMT MHz Band ƒo: 300 to 450MHz
Dimensions: millimeters (inches) HOW TO ORDER
4 – ( 1.0±0.2v
0.04±0.008)
PAR S 433.92 K 04 4
4 – ( 1.0±0.2
0.04±0.008) 4 – R ( 0.15
0.006) 1 2 3 4 5 6
1 SMT SAW Resonator
1 1.9±0.2 2 Type
2 (0.075
±0.008) 3 Frequency: Please see Electrical Characteristics table
4 – ( 0.6±0.2
0.024±0.008) 3.8±0.2
(0.15±0.008)
4 Marking Code: See table
4 5 Frequency Tolerance or Custom Specification:
3 00 : ±250KHz 04 : ±75KHz
4 – R ( 0.15
01 : ±200KHz 10≥ : Tolerance
0.006) 2.76±0.2
(0.11±0.008)
02 : ±150KHz 11≤ : Custom Spec
5.5±0.2 03 : ±100KHz
(0.22±0.008)
6 Package: R : Tape & reel (2K pcs/R)
Pin Function
➀ Hot
➁ NC
➂ Hot
➃ NC

Specifications (PARS)
Part Number Resonant Frequency (MHz) Resonant Loss (dB) Parallel Capacitance (pF)
PARS 304,45LXXR 304,45 2.5 max. 4.0 max.
PARS 310,00KXXR 310,00 2.5 max. 4.0 max.
PARS 314,00KXXR 314,00 2.5 max. 3.2 max.
PARS 314,50LXXR 314,50 2.5 max. 3.2 max.
PARS 315,00KXXR 315,00 2.5 max. 3.2 max.
PARS 320,65KXXR 320,65 2.5 max. 3.2 max.
PARS 423,22KXXR 423,22 2.5 max. 3.2 max.
PARS 432,92KXXR 432,92 2.5 max. 3.2 max.
PARS 432,42LXXR 433,42 2.5 max. 3.2 max.
PARS 433,92KXXR 433,92 2.5 max. 3.2 max.

Recommended Land Pattern:

millimeters (inches) Marking Code
Monthly Code
Resonant Frequency Marking Code
1.25 MHz
(0.05)
304,45 304 L
0.15 (0.006)
310,00 310 K
1.5
(0.06)
314,00 314 K
314,50 314 L 315K C
0.15 (0.006)
315,00 315 K
1.25
(0.05) 320,65 320 K
(4 digits
423,22 423 K Frequency Marking)
1.25 1.0 1.5 1.0 1.25
(0.05) (0.04) (0.06) (0.04) (0.05) 432,92 432 K
433,42 433 L

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #132. Visit our website http://www.avxcorp.com

132
SAW Resonators
KAR Series MHz Band ƒo: 46 to 315MHz
Dimensions: millimeters (inches)
HOW TO ORDER
9.0
3.2
(.126)
7.7
(.303) 2.75
(.354) KAR - 91 CS
(.108) 3.5 4 [ 0.65 7.2
1 2 3
8 (.283)
(.138) (.315) (.026) 2.0
(.079)

1 Type: (Kyocera Acoustic Resonator)

1
5.0

4 3 2 1
(.197) 15.6 12.0
(.614)
2 Oscillation Frequency: (MHz)
2
(.472)

3
4 3 - 2.5 (.098)
3 Resonator Type:
4 - [0.65
(.026)
2.5
(.098)
CS, CT = small packaging
CB, CD = standard packaging
CK = round packaging
Fig. A 1. L-ch Fig. B 1. L-ch
2. H-ch 2. H-ch
4. GND 3. GND
3. Common 4. Common

1 3
3.0

3.0
Ø0.45 Ø5.08
1 2 3
Ø9.20

Fig. C 1. Hot
2. Hot
3. Ground

Specifications (KAR -u-u)

Channel* Resonant Frequency Resonant Loss Parallel Temperature Stability
(MHz)** (dB) Capacitance (pF) -10°C to +60°C (ppm/°C) Dimension
KAR-55CD U- 2 55.24±0.08 5.0 MAX 3.8±1 ±8
3 61.24±0.08 3.9±1

KAR-83CB U- 5 77.24±0.08 4.0 MAX 4.5±1 ±7

6 83.24±0.08 4.2±1

KAR-55CB W- 3 55.24±0.08 5.0 MAX 4.3±1 ±8 Figure A

4 62.24±0.08 3.7±1

KAR-86CB A- 3 86.24±0.08 3.0 MAX 4.2±1 ±5

4 95.24±0.08 4.0±1

KAR-85CB O- 4 85.24±0.08 3.0 MAX 4.2±1 ±5

5 93.24±0.08 4.0±1

KAR-61CT U- 3 61.24±0.08 5.0 MAX 4.4±1 ±8

4 67.24±0.08 4.2±1

KAR-77CS O- 3 77.24±0.08 4.5 MAX 3.1±1 ±8

4 83.24±0.08 2.8±1

KAR-91CS J- 1 91.24±0.08 3.0 MAX 4.0±1 ±5 Figure B

2 97.24±0.08

KAR-211CS U-13 211.24±0.15 2.7 MAX 3.0±1 ±8

KAR-315CS US 315.24±0.25 2.5 MAX 3.2 MAX ±8

KAR-315CK US 315.24±0.25 2.5 MAX 3.2 MAX ±8 Figure C

*J: Japan, U: USA, W: Germany, A: Australia, O: East Europe

**Other frequencies available on request.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #133. Visit our website http://www.avxcorp.com

133
SAW Resonators
KAR Series MHz Band ƒo: 46 to 315MHz

Specifications (KAR -u-u)

Part Number Resonant Frequency Resonant Loss Parallel Temperature Stability
(MHz) (dB) Capacitance (pF) (ppm/°C) Dimension
KAR-303CS 303.875±0.250
KAR-304CS 304.300±0.250 4.0 max.
KAR-310CS 310.000±0.250
KAR-314CS 314.000±0.250
KAR-314CT 314.500±0.250
KAR-315CS 315.000±0.250
KAR-320CS 320.650±0.250
KAR-345CS 345.000±0.250 2.5 max. ±8 max. Fig. B
KAR-359CS 359.900±0.250 3.2 max.
KAR-417CS 417.500±0.250
KAR-418CS 418.000±0.250
KAR-423CS 423.220±0.250
KAR-432CS 432.920±0.250
KAR-433CS 433.920±0.250
KAR-433CT 433.420±0.250
KAR-479CS 479.500±0.500 2.3 max.
KAR-303CK 303.875±0.250
KAR-304CK 304.300±0.250 4.0 max.
KAR-310CK 310.000±0.250
KAR-314CK 314.000±0.250
KAR-314CL 314.500±0.250
KAR-315CK 315.000±0.250
KAR-320CK 320.650±0.250
KAR-345CK 345.000±0.250 2.5 max. ±8 max. Fig. C
KAR-359CK 359.900±0.250 3.2 max.
KAR-417CK 417.500±0.250
KAR-418CK 418.000±0.250
KAR-423CK 423.220±0.250
KAR-432CK 432.920±0.250
KAR-433CK 433.920±0.250
KAR-433CL 433.420±0.250
KAR-479CK 479.500±0.500 2.3 max.
KAR-303CF 303.875±0.250
KAR-304CF 304.300±0.250 4.0 max.
KAR-310CF 310.000±0.250
KAR-314CF 314.000±0.250
KAR-314CG 314.500±0.250
KAR-315CF 315.000±0.250
KAR-320CF 320.650±0.250
KAR-345CF 345.000±0.250
KAR-359CF 359.900±0.250 2.5 max. ±8 max. Fig. D
KAR-417CF 417.500±0.250 3.2 max.
KAR-418CF 418.000±0.250
KAR-423CF 423.220±0.250
KAR-432CF 432.920±0.250
KAR-433CF 433.920±0.250
KAR-433CG 433.420±0.250
KAR-479CF 479.500±0.500 2.3 max.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #134. Visit our website http://www.avxcorp.com

134
Crystal Clock Oscillators - Miniature SMT
K50-HC-CS Series: HCMOS Drive -
TTL/CMOS Compatible ƒo: 8 to 68MHz
HOW TO ORDER
K50-HC 1 - CS E 40.0000M R
1 2 3 4 5 6
1 Type: (K50-HC series)
2 Stability: 1-100ppm, 0-50ppm
3 Output Compatibility: CS = CMOS 45/55 duty cycle @ 50% VDD
4 Tristate Output: E with function
5 Frequency: (MHz)
6 Standard Packaging: R = tape and reel (1k per reel)

Specifications
CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 8~68 MHz ———
Frequency Precision Df/f ±100, ±50 ppm Inclusive of Temp, Load, Voltage variation
Aging Rate Df/f ±5 ppm/y ———
Operating Temp. TOPR -10~70 °C ———
Storage Temp. TSTR -55~125 °C ———
Supply Voltage Vcc 5±0.5 V ———
Supply Current I cc 50 max. mA CL=50pF, Temp.=25°C, f=50MHZ
Duty Ratio Sy 45~55 % 0.5Vcc DC Level
Output 0 Level V OL 0.1Vcc max. V I OL=16mA
Output 1 Level V OH 0.9Vcc min. V I OH=-16mA
Rise/Fall Time TR, TF 10 max. nsec 0.1Vcc-0.9Vcc
Load Capacitance CL 50 max. (f≤50MHz), 15 max. (f>50MHz) pF ———
Enable/Disable Time — 100 max. nsec ———
Input Voltage Low VIL 0.8 max. V ———
Input Voltage High VIH 2.2 min. V ———

Test Circuit Output Waveform Marking Specifications

Output Frequency
4 3

4 3
T.P. TR TF
A
0.9 VCC
Frequency
VCC V 1 2 50pF
0.5 VCC
Precision 32.0000
(max.) 31
1B W01
<

NC
0.1mF
0.1 VCC
1 2
A B
Pin #1 Indication Model Lot Number
CL=50pF (f≤50MHz), CL=15pF (f>50MHz)
A
(Inclusive of test JIG and probe capacitance) Duty Ratio = x 100
A+B
3 Marking
< <

3 1) I : ±100ppm, 0 : ±50ppm

Pin Connection Enable / Disable

Pad # Function Pin #1 Pin #3

1 CONTROL “H” or Open Oscillation

2 CASE GND “L” High impedance

3 OUTPUT

4 +VCC
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #135. Visit our website http://www.avxcorp.com

135
Crystal Clock Oscillators - Miniature SMT
K50-3C Series: 3.3Volt ƒo: 8 to 68MHz

HOW TO ORDER
K50-3C 1 - E 40.0000M R
1 2 3 4 5
1 Type: (K50-3C series)
2 Stability: 1-100ppm, 0-50ppm
3 Tristate Output: E with function
4 Frequency: (MHz)
5 Standard Packaging: R = tape and reel (1k per reel)

Specifications
CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 8~68 MHz ———
Frequency Precision Df/f ±100, ±50 ppm Inclusive of Temp, Load, Voltage variation
Aging Rate Df/f ±5 ppm/y ———
Operating Temp. T OPR -10~70 °C ———
Storage Temp. TSTR -55~125 °C ———
Supply Voltage Vcc 3.3±0.3 V ———
Supply Current I cc 25 max. mA CL=15pF, Temp.=25°C, f=68MHZ
Duty Ratio Sy 40~60 % 0.5Vcc DC Level
Output 0 Level V OL 0.1Vcc max. V I OL=8mA
Output 1 Level V OH 0.9Vcc min. V I OH=8mA
Rise/Fall Time TR, TF 10 max. nsec 0.1Vcc-0.9Vcc
Load Capacitance C L 15 max. pF ———
5 msec 8<f≤32MHz
Enable/Disable Time — 150 nsec 32<f≤50MHz
5 msec 50<f≤68MHz
Input Voltage Low VIL 0.5 max. V ———
Input Voltage High VIH 2.0 min. V ———

Test Circuit Output Waveform Marking Specifications

Output Frequency
4 3

T.P.
4 3 TR TF
A
0.9 VCC
Frequency
VCC V 1 2 15pF Precision 32.0000
0.5 VCC 31
1L W01
<

NC
0.1mF
0.1 VCC
1 2
A B
CL=15pF (Inclusive of test JIG and probe Pin #1 Indication Model Lot Number

capacitance) A
Duty Ratio = x 100
A+B 3 Marking
< <

3 1) I : ±100ppm, 0 : ±50ppm

Pin Connection Enable / Disable

Pad # Function Pin #1 Pin #3

1 CONTROL “H” or Open Oscillation

2 CASE GND “L” High impedance

or Oscillation Stop
3 OUTPUT

4 +VCC
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #136. Visit our website http://www.avxcorp.com

136
Crystal Clock Oscillators - Miniature SMT
K50-CS Series: Low Power Consumption ƒo: 8 to 50MHz

HOW TO ORDER
K50-CS 1 - S E 40.0000M R
1 2 3 4 5 6
1 Type: (K50-CS series)
2 Stability: 1-100ppm, 0-50ppm
3 Duty Cycle: 45 to 55%
4 Tristate Output: E with function
5 Frequency: (MHz)
6 Standard Packaging: R = tape and reel (1k per reel)

Specifications
CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 8~50 MHz ———
Frequency Precision Df/f ±100, ±50 ppm Inclusive of Temp, Load, Voltage variation
Aging Rate Df/f ±5 ppm/y ———
Operating Temp. TOPR -10~70 °C ———
Storage Temp. TSTR -55~125 °C ———
Supply Voltage Vcc 5±0.5 V ———
Supply Current I cc 30 max. mA CL=15pF, Temp.=25°C, f=50MHZ
Duty Ratio Sy 45~55 % 0.5Vcc DC Level
Output 0 Level V OL 0.1Vcc max. V I OL=4mA
Output 1 Level V OH 0.9Vcc min. V I OH=4mA
Rise/Fall Time TR, TF 10 max. nsec 0.1Vcc-0.9Vcc
Load Capacitance CL 15 max. pF ———
Enable/Disable Time — 100 max. nsec ———
Input Voltage Low VIL 0.8 max. V ———
Input Voltage High VIH 2.2 min. V ———

Test Circuit Output Waveform Marking Specifications

Output Frequency
4 3

T.P. TR TF
4 3
A 0.9 VCC
Frequency
VCC V 1 2 15pF 0.5 VCC Precision 32.0000
31
1A W01
<

NC
0.1mF 0.1 VCC
A B 1 2
Pin #1 Indication Model Lot Number
CL=15pF (Inclusive of test JIG A
Duty Ratio = x 100
and probe capacitance) A+B
3 Marking
< <

3 1) I : ±100ppm, 0 : ±50ppm

Pin Connection Enable / Disable

Pad # Function Pin #1 Pin #3

1 CONTROL “H” or Open Oscillation

2 CASE GND “L” High impedance

3 OUTPUT

4 +VCC
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #137. Visit our website http://www.avxcorp.com

137
KT14 Series SMT Crystal Clock Oscillators
Temperature Compensated

HOW TO ORDER
KT14
KT14 - E G R 28 N - 19.200M T
9.0 ± 0.3 1 23 4 5 6 7 8
PIN CONNECTION 1 Type
1 Vcont 2 Frequency Precision:
7.0 ± 0.3 2 GND/CASEGND D=±2ppm, E=±2.5ppm, K=±5ppm
3 OUTPUT
4 +VCC 3 Lower Temperature Limit:
C=-30°C; E=-20°C, G=-10°C
#1 Pin Mark Marking
Units: mm 4 Upper Temperature Limit:
V=80°C; T=70°C; R=60°C
1.7 Max 5 Supply Voltage: 28=2.8V, 30=3.0V;
6 AFC Function: V=with, N=without
5.08 ± 0.15 7 Output Frequency: 12.8M, 13.0M, 14.4M,
14.85M, 16.8M, 19.2M, 19.44M, 19.68M
1.2 ± 0.1
1 2 8 Reel Packaging: 2000 pcs per reel
(4.6)

4 3
1.2 ± 0.1
1.4 0.7

Test Circuit (Amplitude) KT14 Recommended Pad Layout

#2 PIN #1 PIN
(GND) (N. C. or Vcont)

1.60
A Osciloscope
(~100 MHz)
4 3
Power
Supply V Oscillator 4.6

VDD C1
1 2 10KΩ

N.C. or Vcon
1.60
C1: 10pF Inclusive of test jig and probe capacitance
1.40 3.68 1.40
#3 PIN #4 PIN
(OUTPUT) (Vcc)

Test Circuit (Harmonic Frequency) Recommended Reflow Profile

(°C)
A
Spectrum Analyzer/Counter 300
Peak
4 3 FET Probe Over 200°C 230°C ±5°C
Power 15 sec. max.
V Oscillator 200
Supply
VDD 10pF 150
1 2 10KΩ
100 Over
N.C. or Vcon 180°C
40 sec. max.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #138. Visit our website http://www.avxcorp.com

138
Crystal Clock Oscillators - Leaded
KXO-01 Series:
TTL DRIVE-TTL Compatible ƒo: 8 to 50MHz
HOW TO ORDER
KXO-01 - 1 - 32.0000M T
1 2 3 4
1 Type: (Kyocera Crystal Oscillators)
2 Frequency Precision: 0 = ±50ppm (special)
1 = ±100ppm
3 Frequency
4 Standard Packaging: T = tube (25 pcs.)
Specifications
CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 8~50 MHz ———
0 : ±50 ppm
Frequency Precision Df/f Ta=0~+70°C
1 : ±100 ppm
Aging Rate Df/f ±5 ppm/y ———
Operating Temp. TOPR 0~+70 °C ———
Storage Temp. TSTR -55~+125 °C ———
Supply Voltage Vcc 5±0.5 V ———
Supply Current I cc 35 max. mA CL=15pF, • 10TTL Load, Temp.=25°C
Duty Ratio Sy 40~60 % 1.4V DC Level
Output 0 Level V OL 0.4 max. V I OL=16mA
Output Output 1 Level V OH 2.4 min. V I OH=400µA
15 max. nsec 8~32MHz
Rise/Fall Time TR, TF
10 max. nsec 32.1~50MHz
Fan Out ———— 1~10 TTL ———

Test Circuit Dimensions and PIN Identification

5.0V #1 #7
TP

400V
13 max. 11 max. 4.58±0.5 7.62±0.3
14 8
A (.512) (.433) (.180±.02) (.300±.01)
KXO-01
VCC V 0.1mF 1 7 CL 19 max. 12.2±0.5
15pF (.748) (.480±.02)
21 max. #14 15.24±0.3
#8
(.827) (.600±.01)
CL = 15pF max (Inclusive of test JIG and probe capacitance) 0.8
(.031)
4.93
(.194)
6.35±0.5
(.250±.02)
Output Wave 0.5
(.020)
4 - f0.45 (.018)
mm (inch)
TF TR
H
2.4V Pin Connection Marking
Pad # Function
1.4V
1 N.C. MFG. ID
KXO-01-1 PART NUMBER
0.4V 40.0000 MHz OUTPUT FREQUENCY
7 CASE GND 9907 Japan COUNTRY OF ORIGIN
L
DATE CODE
A B 8 OUTPUT DOT (INDICATING PIN 1)
A
DUTY RATIO= ____
A+B 14 VCC

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #139. Visit our website http://www.avxcorp.com

139
 Crystal Clock Oscillators
386 Series: HCMOS Drive - CMOS Compatible ƒo: 24, 32, 40, 50MHz
HOW TO ORDER
386-HC 1 - C S E - 40.0000M T
1 2 3 4 5 6
1-CSE
386-HC MHz
32.0000
Japan
1 Type: 386 = 14 pin DIP
9907
2 Frequency Precision: 1 = ±100ppm
3 Output Level/Duty Cycle: CS = CMOS compatible/45 to 55%
4 Enable/Disable Function: u = without function, E = with function
5 Frequency
6 Packaging: T = tube (25 pcs.)
Specifications
CLASSIFICATION CODE RATING UNIT REMARKS
CL=150pF max. (25, 32, 40MHz)
Output Frequency f OUT 25, 32, 40, 50 MHz CL=80pF max. (50MHz)
Frequency Precision Df/f 1: ±100 ppm Ta=0~+70°C
(Inclusive of Temp. Voltage variation)
Aging Rate Df/f ±5 ppm/year ———
Operating Temp. TOPR 0~+70 °C ———
Storage Temp. TSTR -55~+125 °C ———
Supply Voltage Vcc 5±0.25 V ———
Supply Current I cc 65 max. mA CL=150pF, Ta=25°C
Duty Ratio Sy 45~55 % 0.5VCC DC Level
Output 0 Level V OL 0.1VCC max. V I OL = 12mA
Output
Output 1 Level V OH 0.9VCC min. V I OH = -1mA
Rise/Fall Time TR, TF See Clock Time Table nsec
Time to Enable/Disable ——— 100 max. nsec ———
I IH 10 max. µA VCC=5.25V
Input Current I IL -150 max. µA VCC=5.25V
V IH 2.2 min. V
Input Voltage ———
V IL 0.8 max. V
Fan Out ——— 7 TTL ———
150 pF f=25, 32, 40MHz
Loan Capacitance CL 80 pF f=50MHz

Dimensions Clock Time Table (32MHz, 40MHz)

Frequency 32MHz 40MHz 12a
12b
Clock time (ns) Min Max Min Max
VCC-0.8V
Clock high time t2a 9 – 8 –
Clock high time t2b 5 – 5 – 2.0V
Clock low time t3a 9 – 8 – 0.8V
PIN 1 PIN 7
Clock low time t3b 7 – 6 –
0.8 Clock tall time t4 – 7.5 – 8 t5 t3b
14
(.031)
7.5 (.28) Clock rise time t5 – 7.5 – 8 t3a
7.62
4.58 (.180) (.300) 13
(.512)
6.35 (.25)
Clock Time Table (50MHz)
4-ø0.45 12.2
(.018) PIN 14 (.408) PIN 8 Frequency 50MHz 12a
12b
15.24 (.600) Clock time (ns) Min Max
Clock high time t2a 7 – 3.7V
21 (.828) Unit: mm (inch)
Clock high time t2b 4 – 2.0V
Clock low time t3a 7 – 0.8V
Clock low time t3b 5 –
Clock tall time t4 – 7 t5 14 t3b
Clock rise time t5 – 7 t3a

Test Circuit Pin Connection Markings

T.P. 386 Function
MFG. ID
1 N.C. or Control
8 5 386-HC1-CSE PART NUMBER
A
7 Case GND 32.0000 MHz OUTPUT FREQUENCY
386-HC
VDD 0.1mF 1
CL 9907 Japan COUNTRY OF ORIGIN
V 4 50pF 8 Output DATE CODE
14 VDD DOT (INDICATING PIN 1)
CL = 150pF max (Inclusive of test JIG and probe capacitance)
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #140. Visit our website http://www.avxcorp.com

140
Crystal Clock Oscillators - Leaded
KXO-HC/KHO-HC Series: HCMOS Drive - ƒo: 1 to 72MHz
TTL or CMOS Compatible
HOW TO ORDER
KXO-HC 1 -TS E - 32.0000M T
1 23 4 5 6
1 Type: KXO = 14 pin DIP; KHO = 8 pin DIP
2 Frequency Precision: S = ±25ppm (special)
0 = ±50ppm
1 = ±100ppm
3 Output Level/Duty Cycle: TS = TTL compatible/45 to 55%
CS = CMOS compatible/45 to 55%
4 Enable/Disable Function: Blank u = without function
E = with function
5 Frequency
6 Standard Packaging: T = tube (KXO-HC = 25 pcs.)
(KHO-HC = 40 pcs.)

Specifications: TTL Compatible

CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 1~50 50.1~72 MHz ———
Frequency Precision 0 : ±50 ppm
Df/f Ta=0~+70°C
(Inclusive of Temp. Voltage variation) 1 : ±100 ppm
Aging Rate Df/f ±5 ppm/year ———
Operating Temp. TOPR 0~+70 °C ———
Storage Temp. TSTR -55~+125 °C ———
Supply Voltage Vcc 5±0.5 5±0.25 V ———
Supply Current I cc 50 max. 70 max. mA CL=15pF • 10TTL Load, Ta=25°C
Duty Ratio Sy 45~55 % 1.4V DC Level
Output 0 Level V OL 0.4 max. V I OL=16mA
Output Output 1 Level V OH 2.4 min. V I OH=-1mA
Rise/Fall Time TR, TF 5.0 max. 3.5 max. nsec 0.4V~2.4V CL=15pF, • 10TTL Load
Time to Enable/Disable ——— 100 max. nsec ———
I IH 10 max. µA VCC=5.5V
Input Current
I IL -150 max. µA VCC=5.5V
V IH 2.2 max. V
Input Voltage ———
V IL 0.8 max. V
Fan Out ——— 10 TTL ———
Load Capacitance CL 15 max. pF ———

Test Circuit Shape of Output Wave

(KXO-HC-T/KHO-HC-T) (KXO-HC-T/KHO-HC-T)

5.0V TF TR
TP H
2.4V
400V
14 8
A 1.4V
KXO-HC
VDD V 0.1mF 1 7 CL 0.4V
15pF
L
A B
CL = 15pF max (Inclusive of test jig and probe capacitance)
A
DUTY RATIO= ____
A+B

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #141. Visit our website http://www.avxcorp.com

141
Crystal Clock Oscillators - Leaded
KXO-HC/KHO-HC Series HCMOS Drive - ƒo: 1 to 72MHz
TTL or CMOS Compatible (Continued)
Specifications: CMOS Compatible
CLASSIFICATION CODE RATING UNIT REMARKS
Output Frequency f OUT 1~50 50.1~72 MHz ———
Frequency Precision 0 : ±50 ppm
Df/f Ta=0~+70°C
(Inclusive of Temp. Voltage variation) 1 : ±100 ppm
Aging Rate Df/f ±5 ppm/year ———
Operating Temp. TOPR 0~+70 °C ———
Storage Temp. TSTR -55~+125 °C ———
Supply Voltage Vcc 5±0.5 5±0.25 V ———
Supply Current I cc 50 max. 80 max. mA CL=50pF, Ta=25°C
Duty Ratio Sy 45~55 % 0.5VCC DC Level
Output 0 Level V OL 0.1VCC max. V I OL = 16mA
Output
Output 1 Level V OH 0.9VCC min. V I OH = 1mA
Rise/Fall Time TR, TF 10 max. 6 max. nsec 0.1CC~0.9CC CL=50pF
Time to Enable/Disable ——— 100 max. nsec ———
I IH 10 max. µA VCC=5.5V
Input Current
I IL -150 max. µA VCC=5.5V
V IH 2.2 max. V
Input Voltage ———
V IL 0.8 max. V
Load Capacitance CL 50 max. pF ———

Test Circuit Shape of Output Wave Markings

(KXO-HC-C/KHO-HC-C) (KXO-HC-C/KHO-HC-C)

T.P.
H
TF TR KXO-HC
0.9V
8 5
A MFG. ID
0.5V
KHO-HC CL
KXO-HC-TSE PART NUMBER
VDD V 0.1mF 1 4 50pF
42.0000 MHz OUTPUT FREQUENCY
0.1V
9907 Japan COUNTRY OF ORIGIN
L
DATE CODE
DOT (INDICATING PIN 1)
CL = 50pF max (Inclusive of test jig and probe capacitance) A B

A
DUTY CYCLE= ____
A+B
KHO-HC
Dimensions and PIN Identification MFG. ID
HCI-TS PART NUMBER
KXO-HC #1 #7 24.0000 OUTPUT FREQUENCY
0.8 9907 JPN COUNTRY OF ORIGIN
(.031)
4.93 DATE CODE
13 max. 11 max. 4.58±0.5 7.62±0.3
(.194) DOT (INDICATING PIN 1)
(.512) (.433) (.180±.02) (.300±.01) 6.35±0.5
(.250±.02)
0.5
(.020)
19 max. 12.2±0.5 4 - f0.45 (.018)
(.748) (.480±.02)
21 max. #14 15.24±0.3
#8 Pin Connection
(.827) (.600±.01)
mm (inch) KXO KHO
1 1 N.C. or Control
KHO-HC 7 4 Case/GND
12.9 #1 #4
(.508) 8 5 Output
0.8
(.031) 14 8 +5.0V D.C.
5.08
12.9 10.8 (.200)
(.425)
(.508) 6.35
(.250) Enable / Disable Function Chart
10.8 7.62 4 - f0.55max.
Pin 1 Pin 8
(.425) (.300)
#5
(.022) High or Open Oscillation
#8
mm (inch) Low High Impedance

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #142. Visit our website http://www.avxcorp.com

142
MIL-PRF-28861 /1, /4, /5, /12
Hermetically Sealed
EMI Filters (B-level) HOW TO ORDER
MIL-PRF-28861 /2 - 001
1 2 3
1 Mil-Spec Number
2 Slash Sheet
3 Dash Number
MIL-PRF-28861/1
.410 Dash Cir- Rated Min. Dash Cir- Rated Min.
B MAX number cuit voltage capaci- number cuit voltage capaci-
.200 .120 DC AC 1/ tance DC AC 1/ tance
A (µF) (µF)
±.010 .140 MIN volts volts volts volts
MIN 001, 011 L2 50 --- 1.2 010, 020 C 200 125 0.15
002, 012 C 50 --- 1.2 021, 031 L2 200 125 0.01
003, 013 L2 70 --- 0.7 022, 032 C 200 125 0.01
+.010 004, 014 C 70 --- 0.7 023, 033 L2 200 125 0.0027
.115 -.015
2 PLACES 005, 015 L2 100 --- 0.45 024, 034 C 200 125 0.0027
.410 .070±.010 DIA. 006, 016 C 100 --- 0.45 025, 035 L2 200 125 0.001
DIA. MAX 2 PLACES
009, 019 L2 200 125 0.15 026, 036 C 200 125 0.001
.250-2B UNF-2A

MIL-PRF-28861/4
Dash Cir- Max. Min. Max. Max. Dash Cir- Max. Min. Max. Max.
L number cuit current capaci- voltage DC number cuit current capaci- voltage DC
(amps) tance drop resist- (amps) tance drop resist-
(µF) (volts) ance (µF) (volts) ance
.200 A .145 (ohms) (ohms)
±.010 ±.045 001, 019 L1 0.10 0.70 0.17 1.7 010, 028 L1 1.0 0.70 0.14 0.14
.145 002, 020 L2 0.10 0.70 0.17 1.7 011, 029 L2 1.0 0.70 0.14 0.14
±.045 003, 021 π 0.10 1.4 0.17 1.7 012, 030 π 1.0 1.4 0.14 0.14
004, 022 L1 0.30 0.70 0.23 0.77 013, 031 L1 3.0 0.70 0.15 0.05
+.010
005, 023 L2 0.30 0.70 0.23 0.77 014, 032 L2 3.0 0.70 0.15 0.05
.115 -.015 006, 024 π 0.30 1.4 0.23 0.77 015, 033 π 3.0 1.4 0.15 0.05
2 PLACES 007, 025 L1 0.50 0.70 0.18 0.36 016, 034 L1 5.0 0.70 0.075 0.015
.410 .070±.010 DIA.
DIA. MAX 008, 026 L2 0.50 0.70 0.18 0.36 017, 035 L2 5.0 0.70 0.075 0.015
.250-2B UNF-2A 2 PLACES
009, 027 π 0.50 1.4 0.18 0.36 018, 036 π 5.0 1.4 0.075 0.015

MIL-PRF-28861/5
Dash Cir- Max. Capaci- Max. Max. Dash Cir- Max. Capaci- Max. Max.
.793 MAX number cuit current tance voltage DC number cuit current tance voltage DC
(amps) (µF) drop resist- (amps) (µF) drop resist-
+100% (volts) ance +100% (volts) ance
.200 A .145 -0% (ohms) -0% (ohms)
±.010 ±.045 001, 013 L1 0.25 0.15 0.375 1.5 007, 019 L1 3.0 0.15 0.150 0.05
.145 002, 014 L2 0.25 0.15 0.375 1.5 008, 020 L2 3.0 0.15 0.150 0.05
±.045
003, 015 π 0.25 0.30 0.375 1.5 009, 021 π 3.0 0.30 0.150 0.05
004, 016 L1 1.0 0.15 0.250 0.25 010, 022 L1 5.0 0.15 0.075 0.015
+.010 005, 017 L2 1.0 0.15 0.250 0.25 011, 023 L2 5.0 0.15 0.075 0.015
.115 -.015
2 PLACES 006, 018 π 1.0 0.30 0.250 0.25 012, 024 π 5.0 0.30 0.075 0.015
.410 .070±.010 DIA.
DIA. MAX .250-2B UNF-2A 2 PLACES

(See MIL-PRF-22861 for insertion loss and other specification details.)

MIL-PRF-28861/12 Dash
number
Circuit Max. Rated
current voltage
Capaci-
tance
(amps) volts (pF)
dc -0,
0.020 GLASS SEAL 0.128 +100%
0.030 (EITHER SIDE) 002, 018 C 5.0 50 15,000
±0.002 003, 019 L 5.0 100 2,700
004, 020 C 5.0 100 2,700
005, 021 L 5.0 100 5,000
006, 022 C 5.0 100 5,000
008, 024 C 5.0 200 10
009, 025 L 5.0 200 25
A 0.25 ±0.03 010, 026 C 5.0 200 25
012, 028 C 5.0 200 100
B REF 2 Places 0.156 013, 029 L 5.0 200 500
014, 030 C 5.0 200 500
034, 036 C 5.0 50 10,000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #143. Visit our website http://www.avxcorp.com

143
EMI Filters
Miniature, Subminiature & Microminiature
Solder-In Style, C Type Specifications
AVX Voltage Min. Current MINIMUM NO LOAD INSERTION LOSS
(db) @ 25°C PER MIL-STD-220
Part Vdc Cap Idc
Number (V) (pF) (A) 10 30 100 300 1 10
MHZ MHZ MHZ MHZ GHZ GHZ
ZXS .073±.002 .075±.005
ZXS1C3-402 50 4000 1.5 15 20 30 35 45 60
(1.85±0.05) (1.90±0.13) ZXS1C3-252 50 2500 1.5 10 15 25 30 40 60
GLASS
.016±.002 SEAL .008±.003 ZXS1A3-152 100 1500 1.5 5 12 22 27 35 55
(0.41±0.05) (0.20±0.08)
ZXS1A3-102 100 1000 1.5 4 10 20 25 31 55
.030 (0.76) ZXS1A3-501 100 500 1.5 – – 15 20 30 50
MAX. POTTING
.100±.020 MENISCUS ZXS1A3-251 100 250 1.5 – – 9 15 25 40
(2.54±0.5)
.093±.005 .275±.020
(2.36±0.13) (6.98±0.5)
ZXS1A3-101 100 100 1.5 – – 3 10 20 30
ZXS1A3-500 100 50 1.5 – – 1 6 15 25
ZYS ZYS1C3-402 50 4000 2.5 15 20 30 35 45 60
.100±.005
.105±.002
(2.67±0.05) GLASS (2.54±0.13) ZYS1C3-252 50 2500 2.5 10 15 25 30 40 60
SEAL .008±.003
.020±.002 (0.20±0.08) ZYS1A3-152 100 1500 2.5 5 12 22 27 35 55
(0.51±0.05) ZYS1A3-102 100 1000 2.5 4 10 20 25 31 55
.030 (0.76) ZYS1A3-501 100 500 2.5 – – 15 20 30 50
.125±.020 MAX. POTTING
MENISCUS
ZYS1A3-251 100 250 2.5 – – 9 15 25 40
.125±.005 (3.18±0.5)
(3.18±0.13) .350±.020 ZYS1A3-101 100 100 2.5 – – 3 10 20 30
(8.89±0.5)
ZYS1A3-500 100 50 2.5 – – 1 6 15 25

ZZS ZZS1C3-103 50 10,000 5 20 26 35 42 48 60

.105±.002 .100±.005 ZZS1C3-502 50 5000 5 15 20 30 35 45 60
(2.67±0.05) GLASS (2.54±0.13)
SEAL .008±.003 ZZS1A3-252 100 2500 5 10 15 25 30 40 60
.020±.002 (0.20±0.08)
(0.51±0.05) ZZS1A3-152 100 1500 5 5 12 22 27 35 55
ZZS1B3-102 200 1000 5 4 10 20 25 31 55
.030 (0.76) ZZS1B3-501 200 500 5 – – 15 20 30 50
.125±.020 MAX. POTTING
.125±.005 (3.18±0.5) MENISCUS
(3.18±0.13) .350±.020 ZZS1B3-251 200 250 5 – – 9 15 25 40
(8.89±0.5) ZZS1B3-101 200 100 5 – – 3 10 20 30

2-56
Screw-In Style, C Type 1-64 THD. Specifications
AVX Voltage Min. Current MINIMUM NO LOAD INSERTION LOSS
(db) @ 25°C PER MIL-STD-220
Part Vdc Cap Idc
Number (V) (pF) (A) 10 30 100 300 1 10
MHZ MHZ MHZ MHZ GHZ GHZ
SX .080±.005
(2.03±0.13)
SXD1C3-402 50 4000 3 15 20 30 35 45 60
.021±.001 SXT1C3-252 50 2500 3 10 15 25 30 40 60
(0.53±0.03) .018±.002 1.5 MAX. IMPERFECT THD.
(0.46±0.05) NO UNDERCUT SXT1A3-152 100 1500 3 5 12 22 27 35 55
#1-64UNC-2A THD.
SXT1A3-102 100 1000 3 4 10 20 25 31 55
.020±.003 SXT1A3-501 100 500 3 – – 15 20 30 50
.073±.003 (0.51±0.08) .090±.005
(1.85±0.08) (2.29±0.13) SXT1A3-251 100 250 3 – – 9 15 25 40
.180±.020 .190±.020
(4.57±0.5) (4.83±0.5) SXT1A3-101 100 100 3 – – 3 10 20 30
SXT1A3-500 100 50 3 – – 1 6 15 25
SYDASH NO .080±.005
SYD1C3-402 50 4000 3 15 20 30 35 45 60
.021±.001 (2.03±0.13) SYT1C3-252 50 2500 3 10 15 25 30 40 60
(0.53±0.03) .018±.002 1.5 MAX. IMPERFECT THD.
(0.46±0.05) NO UNDERCUT SYT1A3-152 100 1500 3 5 12 22 27 35 55
SYT1A3-102 100 1000 3 4 10 20 25 31 55
#2-56UNC-2A THD.
.020±.003 SYT1A3-501 100 500 3 – – 15 20 30 50
(0.51±0.08) .090±.005
.086±.003 (2.29±0.13) SYT1A3-251 100 250 3 – – 9 15 25 40
(2.18±0.08) .180±.020 .190±.020
(4.57±0.5) (4.83±0.5) SYT1A3-101 100 100 3 – – 3 10 20 30
SYT1A3-500 100 50 3 – – 1 6 15 25

SZ .110±.005
SZD1C3-502 50 5000 5 15 20 30 35 45 60
.021±.001
(2.79±0.13) SZT1A3-252 100 2500 5 10 15 25 30 40 60
.024±.002 1.5 MAX. IMPERFECT THD.
(.53±0.03) (0.61±0.05) NO UNDERCUT SZT1A3-152 100 1500 5 5 12 22 27 35 55
#2-56UNC-2A THD. SZT1A3-102 100 1000 5 4 10 20 25 31 55
SZT1A3-501 100 500 5 – – 15 20 30 50
.020±.003
.090±.005 SZT1A3-251 100 250 5 – – 9 15 25 40
(0.51±0.08)
(2.29±0.13)
.105±.005 .260±.020 .240±.020 SZT1A3-101 100 100 5 – – 3 10 20 30
(2.67±0.13) (6.60±0.5) (6.10±0.5)
SZT1A3-500 100 50 5 – – 1 6 15 25
NOTE: Dimensions in inches (millimeters). Torque limiting tool with custom adapter required for proper installation (see front).

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #144. Visit our website http://www.avxcorp.com

144
EMI Filters – Solder-in Style
ZZ, ZS, YS, XS, & WS Series
HOW TO ORDER
CD
Z S 2 C 2 – 103 H
END
VIEW
F 1 2 3 4 5 6 7
A L 1 AVX Style/Case Size
OD D 2 Glass Seal Orientation:
S = non-flange end (standard)
R = flange end (reverse)
3 Circuit (see diagrams to left):
1 = capacitor only (“C”)
2 = L – circuit (“C” and “L”)
B
4 Voltage (VDC):
A = 100 B = 200 C = 50
Circuit Diagrams E = 400 L = 300
1 5 Lead Material:
C 2 = nickel iron (std)
3 = special
2
6 3 – Digit Capacitance Code (in pF):
L (e.g. “103” = 10,000 pF)
C
7 H = Standard High Temperature Design

Mechanical Dimensions: millimeters (inches)

Case Style OD CD A1* A2** B1* B2** D L F

ZZ 3.56 3.00 2.80 ---- 10.16 ---- 0.76 3.56 0.51

(.140") (.118") (.110") ---- (.400") ---- (.030") (.140") (.020")
3.96 3.25 2.80 5.08 15.88 18.16 0.76 6.35 0.51
ZS / ZR (.156") (.128") (.110") (.200") (.625") (.715") (.030") (.250") (.020")
5.08 4.19 3.81 6.35 16.51 19.05 0.81 6.35 0.64
YS / YR (.200") (.165") (.150") (.250") (.650") (.750") (.032") (.250") (.025")
7.37 6.35 3.81 6.35 16.51 19.05 0.81 6.35 0.64
XS / XR (.290") (.250") (.150") (.250") (.650") (.750") (.032") (.250") (.025")
11.43 10.16 5.08 7.62 17.78 20.32 1.27 6.35 0.64
WS / WR (.450") (.400") (.200") (.300") (.700") (.800") (.050") (.250") (.025")
(*length for capacitor only; **length for “L-circuit”)

Capacitance Range: picofarads (pF)

Case Style 50V 100V 200V 300V 400V
min. 25 25 25 ---- ----
ZZ
max. 1500 1500 1000 ---- ----
min. 500 100 10 ---- ----
ZS / ZR
max. 15,000 15,000 2700 ---- ----
min. 1500 1500 1500 ---- ----
YS / YR
max. 100,000 75,000 27,000 ---- ----
min. 50,000 50,000 15,000 10,000 ----
XS / XR
max. 250,000 100,000 22,000 10,000 ----
min. 150,000 150,000 50,000 ---- 10,000
WS / WR
max. 1,200,000 1,000,000 150,000 ---- 50,000

Additional information on this and other styles of EMI filter products, including insertion loss curves, is available in
AVX’s catalog “AVX EMI Filters”.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #145. Visit our website http://www.avxcorp.com

145
Bolt Style EMI Filters
SA Series – 4-40 Thread - Epoxy Sealed –
Circuits Available – C & L
STANDARD CONFIGURATION
.154 A
.159 .030 .112-40 UNC-2A
MAX. (4-40)
.020 ±.002

.030
MAX. A = .120 ±.005
.220
±.010
.240 .360
±.020 ±.020

CIRCUIT DIAGRAMS

THRD
END L2
C
SA1 SA2

Specifications
Insertion Loss2 Per MIL-STD-220, +25°C
AVX DC 1 10 100 200 1 10
P/N CKT CAP1 Voltage DCR MHz MHz MHz MHz GHz GHz
SA1C1-102 C 1000 50 .02 – 4 20 25 25 55
SA1C1-502 C 5000 50 .02 – 15 34 41 42 55
SA1C1-103 C .01 50 .02 4 21 35 42 50 70
SA1C1-273 C .027 50 .02 10 30 39 43 65 70
SA1C1-503 C .05 50 .02 15 35 42 45 70 70
SA2C1-102 L2 1000 50 .02 – 4 20 27 30 60
SA2C1-502 L2 5000 50 .02 – 15 35 41 45 60
SA2C1-103 L2 .01 50 .02 4 21 35 44 50 70
SA2C1-273 L2 .027 50 .02 10 30 50 45 65 70
SA2C1-503 L2 .05 50 .02 15 37 45 45 70 70
SA1A1-102 C 1000 100 .02 – 4 20 25 25 55
SA1A1-502 C 5000 100 .02 – 15 35 41 42 55
SA1A1-103 C .01 100 .02 4 21 35 42 50 70
SA1A1-273 C .027 100 .02 10 30 39 43 65 70
SA1A1-453 C .045 100 .02 14 35 42 45 70 70
SA2A1-102 L2 1000 100 .02 – 4 20 27 30 60
SA2A1-502 L2 5000 100 .02 – 15 35 41 45 60
SA2A1-103 L2 .01 100 .02 4 21 35 44 50 70
SA2A1-273 L2 .027 100 .02 10 30 50 45 70 70
SA2A1-453 L2 .045 100 .02 14 37 45 45 70 70
SA1B1-102 C 1000 200 .02 – 4 20 25 25 55
SA1B1-502 C 5000 200 .02 – 15 34 41 42 55
SA1B1-103 C .01 200 .02 4 21 35 42 50 70
SA2B1-102 L2 1000 200 .02 – 4 20 27 30 60
SA2B1-502 L2 5000 200 .02 – 15 35 41 45 60
SA2B1-103 L2 .01 200 .02 4 21 35 44 50 70
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #146. Visit our website http://www.avxcorp.com

146
Bolt Style EMI Filters
SB Series – 8-32 Thread - Epoxy Sealed –
Circuits Available – C, L, π

STANDARD CONFIGURATION
.093
.187 ±.010
±.010 .040 .164-32 UNC-2A
.045 MAX. (8-32)
±.005 .032 ±.002

.050
±.005
.020 .216
±.005 ±.005
.312 .890
±.031 ±.013

CIRCUIT DIAGRAMS

THRD
END L2
C Pi
SB1 SB2 SB3

Specifications
Insertion Loss2 Per MIL-STD-220, +25°C
AVX DC 1 10 100 200 1 10
P/N CKT CAP1 Voltage DCR MHz MHz MHz MHz GHz GHz
SB1C1-102 C 1000 50 .01 – 4 20 25 40 50
SB1C1-502 C 5000 50 .01 – 15 34 41 50 55
SB1C1-103 C .01 50 .01 4 21 35 40 55 60
SB1C1-273 C .027 50 .01 10 30 39 45 65 70
SB1C1-503 C .05 50 .01 15 35 42 50 70 70
SB2C1-273 L2 .027 50 .01 10 30 50 54 65 70
SB2C1-503 L2 .05 50 .01 15 36 54 60 70 70
SB3C1-323 π .032 50 .01 12 30 60 70 70 70
SB1A1-102 C 1000 100 .01 – 4 20 25 40 50
SB1A1-502 C 5000 100 .01 – 15 34 41 50 55
SB1A1-103 C .01 100 .01 4 21 35 40 55 60
SB1A1-273 C .027 100 .01 10 30 39 45 65 70
SB1A1-503 C .05 100 .01 15 35 42 50 70 70
SB2A1-103 L2 .01 100 .01 4 21 35 38 65 70
SB2A1-273 L2 .027 100 .01 10 30 50 54 70 70
SB3A1-152 π 1500 100 .01 – 8 20 45 70 70
SB3A1-123 π .012 100 .01 – 12 60 70 70 70
SB3A1-153 π .015 100 .01 – 17 37 43 70 70
SB1B1-102 C 1000 200 .01 – 4 20 25 40 50
SB1B1-502 C 5000 200 .01 – 15 34 41 50 55
SB2B1-102 L2 1000 200 .01 – 4 20 27 45 70
SB2B1-502 L2 5000 200 .01 – 15 35 41 55 70
SB3B1-202 π 2000 200 .01 – 8 42 58 70 70

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #147. Visit our website http://www.avxcorp.com

147
Bolt Style EMI Filters
SP Series – 12-32 Thread - Epoxy Sealed –
Circuits Available – C, L, π

STANDARD CONFIGURATION

.250 .157
±.010 .040 .216 UNEF-2A
.045 MAX. (12-32)
.032 ±.002

.250
.020
±.005 .311
.343 .921
±.020 ±.020

CIRCUIT DIAGRAMS

THRD
END L2
C Pi
SP1 SP2 SP3

Specifications
Insertion Loss2 Per MIL-STD-220, +25°C
AVX DC 1 10 100 200 1 10
P/N CKT CAP1 Voltage DCR MHz MHz MHz MHz GHz GHz
SP1C1-204 C .20 50 .01 26 39 52 60 70 70
SP2C1-204 L2 .20 50 .01 26 38 65 70 70 70
SP3C1-124 π .12 50 .01 20 38 70 70 70 70
SP1A1-503 C .05 100 .01 15 35 38 50 70 70
SP1A1-104 C .10 100 .01 20 38 48 53 70 70
SP2A1-503 L2 .05 100 .01 15 36 54 60 70 70
SP3A1-753 π .075 100 .01 18 38 70 70 70 70
SP1L1-102 C 1000 200* .01 – 4 20 25 40 50
SP1L1-502 C 5000 200* .01 – 15 34 41 50 55
SP1L1-103 C .01 200* .01 4 21 35 40 55 60
SP1L1-253 C .025 200* .01 8 28 36 44 64 70
SP2L1-102 L2 1000 200* .01 – 4 20 27 45 70
SP2L1-502 L2 5000 200* .01 – 15 35 41 55 70
SP2L1-103 L2 .01 200* .01 4 21 35 38 65 70
SP3B1-152 π 1500 200 .01 – 8 20 45 70 70
SP3B1-123 π .012 200 .01 – 12 60 70 70 70

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #148. Visit our website http://www.avxcorp.com

148
Integrated Passive Components (IPC)
EMI Noise Filter - KNF
Recommended Foot Print HOW TO ORDER
Dimensions: millimeters (inches)
U (Via Hole)
KNF 21 KNF 32
KNF 21 400 -W 3
T 3.20 (0.126) 4.40 (0.173) 1 2 3 4 5
W 1.00 (0.039) 1.40 (0.055) 1 Series:
R 2.30 (0.091) 3.00 (0.118) KNF
Q S W R C
P
1.20 (0.047)
0.80 (0.031)
2.50 (0.098)
1.20 (0.047)
2 Size:
Q 0.40 (0.016) 0.60 (0.024)
21 = 0805; 32 = 1206
S 0.60 (0.024) 0.60 (0.024) 3 Cut Off Frequency:
U 0.30 (0.012) - 0.40 (0.016) 0.50 (0.020) MHz
P
Foot Print 4 Taping Direction:
C
Solder Resist W (STD)
Area
5 Quantity Per Reel:
T 2 = 2000; 3 = 3000
Dimensions
2.0
Taping Direction (W,X)
(0.079)
IN OUT
1.25
(0.049)

GND W (STD)

Equivalent Circuit
1.0
(0.039)
Max.
0.40
(0.016)
X (Option)
millimeters (inches)
Specifications
millimeters (inches)
Cut off Rated Rated
KNF 21 KNF 32 Part Number Frequency Capacitance Attenuation Current Voltage
A 2.00 (0.079) 3.20 (0.126) (MHz) (pF) (dB) (A) (V)
B 1.25 (0.049) 1.60 (0.063) KNF21050 50 130 20 (350-850) MHz 0.15 25
C 0.80 (0.031) 1.00 (0.039) KNF21100 100 65 20 (450-950) MHz 0.15 25
KNF21200 200 33 20 (700-1200) MHz 0.15 25
D 0.40 (0.016) 0.60 (0.024)
KNF21400 400 17 20 (900-1400) MHz 0.15 25
KNF32025 25 235 20 (200-600) MHz 0.20 25
KNF32050 50 130 20 (350-850) MHz 0.20 25
KNF32100 100 65 20 (450-950) MHz 0.20 25
KNF32200 200 33 20 (600-1100) MHz 0.20 25

KNF 21 SERIES KNF 32 SERIES

10 10
400MHz
200MHz 200MHz
0 0
Attenuation (dB)
Attenuation (dB)

100MHz
-10 -10

-20 -20
100MHz 50MHz
50MHz 25MHz
-30 -30

-40 -40

-50 -50
10 20 50 100 200 500 1000 2000 10 20 50 100 200 500 1000 2000
Frequency (MHz) Frequency (MHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #149. Visit our website http://www.avxcorp.com

149
Integrated Passive Components (IPC)
High Current EMI Noise Filter - KNH
HOW TO ORDER
2.0
(0.079) KNH 21 104 -3 AA
1 2 3 4 5
1.25
1 Series:
(0.049) KNH
2 Size:
21 = 0805
3 Capacitance Code
1.0 4 Taping Quantity:
(0.039) 3 = 3000
Max.
0.40 5 Standard
(0.016)
millimeters (inches)

IN OUT
Recommended Foot Print
U (Via Hole)
GND
Equivalent Circuit

Q S W R

Specifications
Rated Rated
Capacitance Current Voltage
Part Number
Value (A) (VDC)
Foot Print KNH21104 100nF 2.0 25
P KNH21473 47nF 2.0 50
Solder Resist
C Area KNH21471 470pF 1.0 50
KNH21221 220pF 1.0 50
T KNH21101 100pF 1.0 50
KNH21470 47pF 1.0 50
Dimensions: millimeters (inches) KNH21220 22pF 1.0 50

T 3.20 (0.126)
W 1.00 (0.039) Electric Characteristics (50Ω System)
R 2.30 (0.091) 10
C 1.20 (0.047) KNH21470
KNH21220
P 0.80 (0.031) 0
Q 0.40 (0.016)
S 0.60 (0.024) -10
Attenuation (dB)

U 0.30 (0.012) - 0.40 (0.016)

KNH21471
-20 KNH21221
KNH21101
-30

-40
KNH21104
KNH21473
-50

-60
1 2 5 10 20 50 100 200 500 1000
Frequency (MHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #150. Visit our website http://www.avxcorp.com

150
Integrated Passive Components (IPC)
EMI Noise Filter Array - KNA
Equivalent Circuit HOW TO ORDER
KNA 32 050 -W 3
OUT OUT OUT OUT
1 2 3 4 5
1 Series: KNA (Array Signal Line Type)
2 Size: 32 = 1206
3 Cut Off Frequency:
MHz
GND GND
IN IN IN IN 4 Taping Direction:
(W = IN Left/X = IN Right) STD = W
5 Quantity (Per Reel = Kpcs):
STD = 3Kpcs

Dimensions Taping Direction

Input Direction Mark W direction is standard specification. However, X
R OUT direction is possible, if specified.
Dimensions: mm (inches)
GND W G
L 3.20 ± 0.20
(0.126 ± 0.008)
IN W 1.60 ± 0.20
R L (0.063 ± 0.008)
T 0.90 max. W Direction X Direction
T (0.035 max.) Direction of feed
P P 0.80 (0.031)
S S 0.35 ± 0.15
(0.014 ± 0.006) Performance/Requirement
G 0.60 (0.024) A = Insulation Resistance -------- 1000MΩ min.
R 0.01 % (.0004) B = Operating Temperature-------- –25 ~ 85°C
P 0.80 (0.031)

Recommended Land Pattern

Dimensions: mm (inches) Electrical Characteristics
E A 2.20 (0.087) Part Cut off *1 Capaci- ATT Rated Rated
F B 1.00 (0.039) Frequency tance Characteristics*2 Current Voltage
Number
G H Via Hole K (MHz) (pF) (Typical 20dB) (mA = (V = DC)
C 0.40 (0.016) +25/-20% ATT Range = MHz DC)
D 0.60 (0.024) KNA32050 50 115 350 ~ 850 100 25
A MB D E 2.80 (0.110)
KNA32100 100 65 450 ~ 950 100 25
F 0.40 (0.016)
C KNA32200 200 33 700 ~ 1200 100 25
G 0.40 (0.016)
I H 0.80 (0.031) *1 Attenuation of Cut off Frequency 6dB max.
J *2 Attenuation Characteristics should be standard characteristics of 50Ω.
L I 2.60 (0.102)
J 3.80 (0.150)
Copper Film Pattern
K 0.30 ~ 0.40 10
Resist
(0.012 ~ 0.016) 200MHz
Copper Film Pattern + Resist
L 5.00 (0.197) 0
M 1.30 (0.051)
Attenuation (dB)

-10

-20
50MHz
-30
100MHz
-40

-50
0 100 200 300 400 500 600 700 800 9001000
Frequency (MHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #151. Visit our website http://www.avxcorp.com

151
Thin-Film Low Pass Filter
LP0805 Type
Dimensions: millimeters (inches) HOW TO ORDER
LP - 0805 A 0902 - AW
1 2 3 4 5
1 Style: Low Pass
2 Size: 0805
3 Layout Type: (see below)
4 Frequency: MHz
5 Termination: Nickel/Solder (Sn/Pb)

2.03±0.1
L (0.080±0.004)
1.55±0.1 Terminals and Layout (top view)
W (0.061±0.004)
1.02±0.1 Type A Type B
T (0.040±0.004)
0.56±0.25
A (0.022±0.010)
0.35±0.15
B (0.014±0.006)

Electrical Characteristics
Part Frequency L Loss VSWR Attenuation Layout
Application
Number Band (MHz) max max (dB) Typical Type
E-GSM LP0805A0897AW 880 ~ 915 A
LP0805A0942AW 925 ~ 960 A
GSM LP0805A0902AW 890 ~ 915 A
LP0805A0947AW 935 ~ 960 A
AMPS LP0805A0836AW 824 ~ 849 A
LP0805A0881AW 869 ~ 894 A
PCN LP0805A1747AW 1710 ~ 1785 0.4dB 1.7 30@2xFo B
LP0805A1842AW 1805 ~ 1880 (0.3dB typ) 20@3xFo B
PCS LP0805A1880AW 1850 ~ 1910 B
LP0805A1960AW 1930 ~ 1990 B
PHP LP0805A1907AW 1895~ 1920 B
DECT LP0805A1890AW 1880 ~ 1900 B
Wireless LAN LP0805A2442AW 2400 ~ 2484 B

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #152. Visit our website http://www.avxcorp.com

152
Low Pass Filter Array
1206 Four Element Integrated Passive Component

L
HOW TO ORDER
ES Z 3 F 4 3 Y 330 M 301 K A T 2 A
1 2 3 4 5 6 7 8 9 0s 11 ss
12 13 s
14
W
BL 1 Style
2 Size: 3 = 1206
X 3 Filter Array
S 4 Number of Caps
P
5 Voltage: 3 = 25V
T 6 Dielectric: Y = ±500PPM
7 Capacitance Code)
8 Capacitance Tolerance: M = ±20%
BW Center Line 9 Resistance Code
Dimensions: millimeters (inches) 0 Resist Tolerance: M = ±10%
s
11 Failure Rate: A = Not Applicable
L W T BW BL P X S ES
3.25±.0.15 1.60±0.2 1.22 MAX 0.41±0.1 0.18+0.25
-0.08
(.128±.006) (.063±.008) (.048 MAX) (.016±.004) (.007+.010
0.76 REF 1.14±0.1 0.38±0.1 0.41±0.1
-.003) (.030 REF) (.045±.004) (.015±.004) (.016±.004)
s
12 Terminations: T = Plated Ni and Solder

s
13 Packaging Code (Reel Size):
2 = 7" Reel Paper Tape
s
14

0
Forward Transmission (dB)

-10

100pF-33Ohm
-20 75pF-47Ohm
58pF-58Ohm

-30

-40

-50
0.01 0.1 1 10 100 1000 10000 100000
Frequency (MHz)

Equivalent Circuits

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #153. Visit our website http://www.avxcorp.com

153
Ceramic Filters
PBFS and PBFC Series - Surface Mount
Dimensions: HOW TO ORDER
PBFS Series PBF S 455 P 15 D R
1 2 3 4 5 67
1.0±0.1 1.0±0.1 1.0±0.1 1 Model: PBFS or PBFC
(1) Input
(2) Gnd 7.3 0.3±0.1 4.0
2 Type: S = Inline leads
(3) Output 8.9 C = Leadless
2.0 2.0
6.0
1.0
3 Center Frequency:
(1) (2) (3) 450 = 450 kHz
455 = 455 kHz
4 Number of Ceramic Elements:
PBFC Series P = 4-element
1.0 7.5
1.5 1.5
5 Passband Width (at 6dB):
(1) Input (3)
4-element (30, 25, 20, 15, 12, 9, 6, 4)
(2) Gnd
(3) Output
6.0 (2)
1.0
4.0
6 Group Delay Time:
1.0 D = Standard Group Delay
1.0
(1) K = Controlled Group Delay
7
0.3
1.0
Packaging:
R = tape and reel
(13" = 1000 pcs. per reel)
Specification (PBF_455 Series)
P (4-element) type - Standard Group Delay
Center Bandwidth Stop Band Insertion Input/Output Operating
Part No. Ripple
Frequency (f0) 6dB 40dB Attenuation Loss Impedance Temp. Range
PBF_455P20D ±10kHz min. ±20kHz max.
PBF_455P15D ±7.5kHz min. ±15kHz max. 25dB min.
455kHz±1.5kHz -20°C
PBF_455P12D 2.0dB max. ±6.0kHz min. ±12.5kHz max. 6dB max. 1.5kΩ to +80°C
PBF_455P9D ±4.5kHz min. ±11.0kHz max.
PBF_455P6D ±3.0kHz min. ±9.0kHz max.
455kHz±1.0kHz 35dB min.
PBF_455P4D ±2.0kHz min. ±7.5kHz max.

P (4-element) type - Controlled Group Delay

Center Bandwidth Stop Band Insertion Group Delay Input/Output Operating
Part No. Ripple
Frequency (f0) 6dB 40dB Attenuation Loss Time Impedance Temp. Range
PBF_455P30K ±15kHz min. ±35kHz max. 7dB max. 15.0µS max (±10.0kHz)

PBF_455P25K 455kHz 1.0dB max. ±12.5kHz min. ±30kHz max. 25dB min. 6dB max. 15.0µS max (±8.0kHz) 1.0kΩ±10% -20°Cto +80°C
PBF_455P20K ±10kHz min. ±25kHz max. 5dB max. 30.0µS max (±10.0kHz)

Suggested Solder Pad Layout

PBFS Series PBFC Series
2.0 2.0
2.0 2.0

2.0
2.4

1.5 1.5
3.9
1.5 1.5 1.5

2.0

1.5

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #154. Visit our website http://www.avxcorp.com

154
Ceramic Filter
KBF-R/P, RS/PS Series - Leaded
Dimensions: millimeters (inches) HOW TO ORDER
KBF-RS Series (6-Element) KBF - 455 R S - 20 A
9.5 (.374)
Standard
0.6 1 2 3 4 5 6
(.024)
Passband
width 3.5
1 Model: 4 Blank: Standard, S: Low
2 Center Frequency: profile
6.4 Date Code (.138)
(.252)

450 450KHz 5 Passband Width (at 6dB)

6.3
(.248)
0.4 455 455KHz # Elements Total Band Width, kHz
3.5 (.016)
(.138)
Lead Cut
0.6
3 Number of Ceramic 6-Elements 25,20,15,12,10,9,7,6,4
0.6 0.4
1 2
(.024) (.016) (.024) Elements: 4-Elements 25,20,15,12,10,9,7,6,4
4.3
(.168) 1. Input 2.2
3 4 5
0.9 2. Output (.087) R 6-elements
(.035) 3. Ground
0.9
(.035)
4. Ground
5. Ground
P 4-elements 6 A High selectivity type
2.4 2.6 2.9
(.094) (.102) (.114) AS Ultra high selectivity type
0.4
(.016)

KBF-PS Series (4-Element) KBF-R Series KBF-P Series

6.5 (.256)
Standard
0.6
(.024)
(6-Element type) (4-Element type)
Passband
width 3.5 11.0 7.0 8.0 7.0
6.4 (.433) Marking (.276) (.315) Marking (.276)
Date Code (.138)
(.252)

8.4 8.0
6.3 (.331) (.315)
(.248)
0.4
(.016) 4.0 0.8 (.031) 4.0 0.8 (.031)
3.5
(.157) (.157)
(.138) 0.6 (.024) 0.2 0.6 (.024)
Lead Cut 4.3 0.2 (.008) 4.3 (.008)
0.4 0.6
0.6 (.169) (.169)
(.024) (.016) (.024)
5 4 3 1 3 1
4.3 1 3
1. Input 7.0 7.0
(.169) 2 4 2.2 (.276) 1. INPUT 1. INPUT
0.7 2. Ground
2 (.276)
(.087) 2 2. OUTPUT 2. OUTPUT
(.028) 3. Output 3. GROUND 3. GROUND
1.6 4. Ground 4. GROUND 0.8 (.031)
1.9 (.063) 1.0 (.039)
(.075) 5. GROUND 2.7 (.106)
1.2 (.047)
4.3
(.169) 1.2 (.047)
0.4 2.7
(.016) (.106)

Standard Packaging: Bulk=200 pcs

Electrical Characteristics
R/RS (6-Element type)
Center Bandwidth Stop Band Insertion Input/Output Operating
Model No. Ripple
Frequency (f0) 6dB 50dB Attenuation Loss Impedance Temp. Range
KBF-455RS-20A ±10.0kHz min. ±20.0kHz max. 4dB max.
1.5kΩ
KBF-455RS-15A ±7.5kHz min. ±15.0kHz max.
KBF-455RS-10A 455kHz±1.5kHz ±5.0kHz min. ±12.0kHz max. 37dB min. -20°C
to +80°C
KBF-455RS-9A 2.0dB max. ±4.5kHz min. ±10.0kHz max. 6dB max. 2.0kΩ
KBF-455RS-7A ±3.5kHz min. ±9.0kHz max.
KBF-455RS-6AS 455kHz±1.0kHz ±3.0kHz min. ±9.0kHz max.
35dB min.
KBF-455RS-4AS ±2.0kHz min. ±7.5kHz max.
P/PS (4-Element type)
Center Bandwidth Stop Band Insertion Input/Output Operating
Model No. Ripple
Frequency (f0) 6dB 40dB Attenuation Loss Impedance Temp. Range
KBF-455PS-25A 455kHz±2.0kHz ±12.5kHz min. ±24.0kHz max. 4dB max.
KBF-455PS-20A ±10.0kHz min. ±20.0kHz max.
1.5kΩ
KBF-455PS-15A 455kHz±1.5kHz ±7.5kHz min. ±15.0kHz max. 27dB min. -20°C
to +80°C
KBF-455PS-10A 2.0dB max. ±5.0kHz min. ±11.0kHz max. 6dB max.
KBF-455PS-7A ±3.5kHz min. ±9.0kHz max. 2.0kΩ
KBF-455PS-6AS ±3.0kHz min. ±9.0kHz max. 35dB min.
455kHz±1.0kHz
KBF-455PS-4AS ±2.0kHz min. ±7.5kHz max.
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #155. Visit our website http://www.avxcorp.com

155
KAF - Cordless Phones Series SAW Filters
46 and 49 MHz – Low Insertion Loss SAW Filters
HOW TO ORDER
KAF - 46 NR - ME
1 2 3
1 Model (Kyocera Acoustic Filter)
2 Frequency
3 Type Number
Dimensions: Test Circuit KAF-46NR-ME/KAF-49NR-MA
46 49 L2
4.5
(.177) L1 (µH) 0.47 0.39 L1 5
5.0 L2 (µH) 0 0.33 3 1
(.197) 4 2
50Ω
ø 0.78
(.031) 50Ω
2.5 (.098) 1. OUTPUT
2. GROUND
2 4 3. OUTPUT
SG R.F.
4. INPUT V.M.
5.0 5. GROUND
1 5 3 (.197)

Unit: mm (inch)
(BOTTOM VIEW)
(BOTTOM VIEW)
12.0 (.472)

Specifications
Part No. Attenuation (46.61 ~ 46.97MHz) Attenuation (49.67 ~ 49.99MHz)
KAF-46NR-ME 6.0 dB max. 30 dB min.
KAF-49NR-MA 30 dB min. 6.0 dB max.

Characteristics
KAF-46NR-ME
0 0
10 10
20 20
Att. (dB)

Att. (dB)

30 30
40 40
50 50
60 60
70 70
45.0 46.0 47.0 48.0 49.0 50.0 51.0 42.0 44.0 46.0 48.0 50.0 52.0 54.0
Frequency (MHz) Frequency (MHz)

KAF-49NR-MA
0 0
10 10
20 20
Att. (dB)

Att. (dB)

30 30
40 40
50 50
60 60
70 70
45.0 46.0 47.0 48.0 49.0 50.0 51.0 42.0 44.0 46.0 48.0 50.0 52.0 54.0
Frequency (MHz) Frequency (MHz)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #156. Visit our website http://www.avxcorp.com

156
Piezoelectric Acoustic Generators

Telephone Ringers

Specifications

Model Number Sound Pressure Level Static Capacitance

KBS-30DB-1A-20 70dB Min. 1.0~1.5KHz 20Vp-p SQ 30cm ★ 48nF ± 30%
KBT-33SB-2T-2 70dB Min. 1.0~1.5KHz 20Vp-p SQ 30cm ★ 48nF ± 30%
KBT-34SB-1T/1A-0 75dB Min. 1.0~1.5KHz 20Vp-p SQ 30cm ★ 68nF ± 30%
KBT-44SB-1A 75dB Min. 1.0KHz 10Vp-p SQ 30cm ★ 68nF ± 30%
KBS-50DL-05C ★ 120nF Min.

★ Measured at 120Hz

External Drive Type -

KBS-XXDA
Dimensions Standard Leads
W = Thickness AWG-32 UL-1571
L = Length (mm) 50±5, 75±5, 100±10
S = Strip (mm) 3±1
C = Color red, black

Resonant Resonant Static Dimensions (mm) Metal

Part Number Frequency Impedance Capacitance Metal Disc Ceramic Disc Electrode Total Thickness Metal Disc Disc
(kHz) (Ω) (pF) (øA) (øB) (øC) (T) Thickness (t) Material
KBS-13DA-12A 12.0±1.2 700 5,000±30% 13.4±0.1 10.0±0.3 (9.0) 0.36±0.1 0.15±0.03 Brass
KBS-15DA-9A-2 10.5±3.0 600 8,000±30% 15.0±0.1 12.0±0.3 (11.0) 0.42±0.1 0.20±0.03 Brass
KBS-20DA-7A 6.6±1.0 300 10,000±30% 20.0±0.1 14.2±0.3 (13.0) 0.45±0.1 0.20±0.03 Brass
KBS-23DA-4A 4.0±1.0 600 12,000±30% 22.8±0.1 15.0±0.3 (14.0) 0.41±0.1 0.15±0.03 Brass
KBS-27DA-5A 4.6±0.5 200 20,000±30% 27.0±0.1 20.2±0.3 (19.0) 0.53±0.1 0.25±0.03 Brass
KBS-30DA-1A 1.4±0.5 500 *48,000±30% 30.0±0.1 20.2±0.3 (19.0) 0.23±0.1 0.10±0.03 Brass
KBS-35DA-3A 2.9±0.5 200 30,000±30% 35.0±0.1 25.0±0.3 (23.5) 0.53±0.1 0.25±0.03 Brass
*Measured at 120Hz, all others at 1kHz

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #157. Visit our website http://www.avxcorp.com

157
Piezoelectric Acoustic Generators

External Drive HOW TO ORDER

KBS - 27 DB - 4 Y u
-Housing Type - KBS-XXDB 1 2 3 4 5 6
1 Model
2 Diameter: (mm) eg. 27
3 Buzzer With Case
4 Resonant Frequency: eg. 3kHz
5 Case Type:
A Lead Type
P Round Terminal Type
6 Disc Material
Blank Brass

Self-Oscillating Type HOW TO ORDER

-KBS-XXDA-XG/FC/GC KBS - 35 DA - 3 G u - 3
1 2 3 4 5 6 7
1 Model
2 Diameter: (mm) eg. 35
3 Element Shape: (Disc-Shaped
Piezoelectric Buzzer)
4 Resonant Frequency: eg. 3kHz
5 3-Terminal Electrode Type
FC F-Shaped Pattern
G G-Shaped Pattern
GC G-Shaped Pattern With Lead
6 Metal Disc Material
S Stainless Steel
Blank Brass
7 Classification for elements of the same
shape (in case of partial modification
of standard specifications only)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #158. Visit our website http://www.avxcorp.com

158
Soft Ferrites
Materials

Power Applications
B1 B2 B3B5 B7 F1 F2 *F4
Symbols Units Test conditions Standard IEC 1332
PW1a / PW1b PW3b PW1b PW2a / PW2b PW2b PW3b PW4b PW5b
µi 25°C 2500 ± 25% 1900 ± 25% 1900 ± 25% 1800 ± 25% 2000 ± 25% 2300 ± 25% 1900 ± 25% 1100 ± 25%
400 25°C 450 460 470 470 470 450 420 390
B at H A/m 100°C 340 360 380 380 380 340 320 310
(nominal mT 1600 25°C 480 490 500 500 500 480 450 420
values)
A/m 100°C 370 380 400 400 400 370 350 330
25°C 12 16 16 16 16 16 15 15
Hc A/m
100°C 10 10 10 10 10 10 10 10
Tc °C > 200 > 250 > 250 > 250 > 250 > 230 > 200 > 200
16 kHz - 100°C
200 mT < 100 < 80
25 kHz - 100°C
200 mT < 180 < 150
32 kHz - 100°C
200 mT < 250 < 200 < 140 < 120
60 kHz - 100°C
200 mT < 340 < 350 < 330 < 280
PL typ mW/cm3 100 kHz - 100°C
100 mT < 150
100 kHz - 100°C
200 mT < 700 < 680 < 580
300 kHz - 100°C
50 mT < 120 < 100
500 kHz - 100°C
50 mT < 230 < 180
1 MHz - 100°C
50 mT < 600
1.5 MHz - 100°C
50 mT < 1200
r Ωxm 1 6 6 6 6 6 6 6
Density g/cm3 4.8 4.8 4.8 4.8 4.8 4.8 4.6 4.6
Values measured on [ 35 X [ 12x18 reference toroid.
*Values measured on [ 27.1 X [ 13.8x11 reference toroid.

Filtering Applications
A2 A3 A4 A5 A6 A8 A9
Symbols Units Test conditions Class
CL11 CL10 CL9 CL9 CL9 CL8 CL
µi 25°C 10000 ± 30% 7500 ± 25% 6000 ± 25% 5000 ± 25% 4000 ± 25% 3500 ± 25 % 2500 ± 25%
^ ^ 25°C 330 330 350 350 410 480 480
B at H mT
(Typical 100°C 200 200 250 250 310 370 370
values) A/m 800 800 800 800 800 1600 1600
25°C 6.2 6.2 6.4 6.4 12 12 12
Hc A/m
100°C 3.1 3.1 4.8 4.8 8 10 10
Tc °C > 120 > 120 > 140 > 140 > 160 > 200 > 200
fc MHz 25°C 0.3 0.3 0.3 0.5 0.6 1 1.5
tgd /µ x10 -6 25°C <7 <7 <9 <6 <9 <8
at f kHz 10 10 10 10 10 100
r Ωxm 0.3 0.3 0.5 0.5 0.5 2 1
Density g/cm3 4.9 4.9 4.8 4.8 4.7 4.8 4.8
Values measured on [ 21 X [ 14x10 reference toroid.

*Specifications mentioned in this publication are subject to change without notice.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #159. Visit our website http://www.avxcorp.com

159
Soft Ferrites
Filtering Application

Fig. A Fig. B Fig. C Fig. D Fig. E

a
b h h c
c g c
d
g ha
Id Od Id Od
f d b b d
h a
h d c
g i
b a

Toroids
Materials (AL nH ± 25%)
See Od Id h A2* A3 A4 A6 A9
Fig. P/N mm mm mm
non-coated non-coated coated non-coated coated non-coated coated non-coated coated
A T-0400A 4 ± 0.15 2.4 ± 0.15 1.6 ± 0.15 1600 1200 960 840 640 570 400 360
A T-0630A 6.3 ± 0.20 3.8 ± 0.15 2.5 ± 0.15 2500 1900 1500 1300 1000 880 560 520
A T-1000A 10 ± 0.30 6 ± 0.20 4 ± 0.15 4000 3000 2650 2400 2100 1600 1400 900 840
A T-1400A 14 ± 0.40 9 ± 0.40 5 ± 0.30 3300 2900 2400 2100 1770 1500 1250 1100
A T-1600A 16 ± 0.50 9.6 ± 0.30 6.3 ± 0.20 4800 4200 3800 3300 2500 2200 1600 1400
A T-2000B 20 ± 0.50 10 ± 0.35 7 ± 0.40 7300 6400 5400 5000 3900 3400 2450 2100
A T-2500A 25 ± 0.75 15 ± 0.45 10 ± 0.35 7650 6750 6000 5200 4000 3500 2500 2200
A T-2800A 27.6 ± 0.85 17.6 ± 0.55 19 ± 0.70 10500 8700 6800 6200 4300 3600
A T-3150A 31.5 ± 0.95 19 ± 0.60 12.5 ± 0.45 7550 6600 5000 4400 3200 2650
A T-3600A 36 ± 1.10 23 ± 0.70 15 ± 0.55 7700 7200 5350 4700 3350 2950
A T-4000A 40 ± 1.20 24 ± 0.70 16 ± 0.50 9600 8400 6300 5500 4000 3850
A T-5000A 50 ± 1.50 15 ± 0.45 10 ± 0.35 14500 12500 9650 8500 6000 5300
A T-6300A 63 ± 2.00 38 ± 1.20 25 ± 0.80 12500 13500 10000 8800 6300 5600

US Size Toroids
Materials (AL nH ± 25%)
See Od Id h A2* A3 A4 A5 A6 A9
Fig. P/N mm (in) mm (in) mm (in) non-coated non-coated coated non-coated coated non-coated coated non-coated coated non-coated coated
4.84 ± 0.20 2.28 ± 0.10 1.28 ± 0.10
A T-0480A (.191 ± .008) (.09 ± .004) (.050 ± .004) 1900 1150 1000 950 850 760 680 475 425
9.52 ± 0.25 4.75 ± 0.13 3.17 ± 0.25
A T-0950A (.375 ± .010) (.19 ± .005) (.125 ± .010) 4400 2650 2300 2100 1800 1750 1550 1050 925
12.7 ± 0.40 7.14 ± 0.25 4.7 ± 0.20
A T-1270A (.500 ± .016) (.28 ± .010) (.185 ± .008) 5400 4050 3550 3100 2800 2700 2400 2150 1900 1350 1200
12.7 ± 0.40 7.14 ± 0.25 6.35 ± 0.25
A T-1270B (.500 ± .016) (.28 ± .010) (.250 ± .010) 7300 5500 4800 4400 3850 3650 3200 2900 2600 1850 1600
12.7 ± 0.40 7.92 ± 0.25 6.35 ± 0.25
A T-1270C (.500 ± .016) (.31 ± .010) (.250 ± .010) 6000 3500 3950 3500 3100 3000 2650 2400 2100 2500 1300
22.1 ± 0.65 13.72 ± 0.40 12.7 ± 0.45
A T-2210A (.870 ± .026) (.54 ± .016) (.500 ± .018) 9100 8000 7200 6400 6050 5300 4800 4200 3000 2500
22.1 ± 0.65 13.72 ± 0.40 6.35 ± 0.20
A T-2210B (.870 ± .026) (.54 ± .016) (.250 ± .008) 4600 4050 3650 3100 3050 2700 2450 2150 1650 1350
25.4 ± 0.75 15.50 ± 0.45 7.93 ± 0.30
A T-2540A (1 ± .030) (.61 ± .018) (.312 ± .012) 4700 4100 3900 3450 3100 2750 1950 1700
38.1 ± 0.76 19.05 ± 0.38 12.7 ± 0.25
A T-3800A (1.5 ± .030) (.75 ± .015) (.500 ± .010) 10500 9300 8750 7700 7050 6200 4400 3850
* : AL nH = ± 30%. All mechanical dimensions are given for non-coated toroids.
Coating : ➩ Polyamide or epoxy ➩ Thickness : < 0.4 mm (to be added on mechanical dimensions) ➩ Breakdown voltage > 2000 VDC
E and U Cores
See a b c d f g h Materials (AL nH ± 25%)
Fig. P/N mm mm mm mm mm mm mm A4 A6 A8
B E-1605A 16 ± 0.50 7.15 ± 0.20 4.9 ± 0.20 5.1 ± 0.20 3.8 min 4 ± 0.15 12 ± 0.25 2560 2400 1400
B E-1905A 19.15 ± 0.75 7.9 ± 0.25 4.8 ± 0.20 5.6 ± 0.15 4.82 min 4.65 ± 0.15 14.75 ± 0.30 2600 2100 1300
B E-2006A 20 ± 0.40 9.95 ± 0.15 5.7 ± 0.20 7.15 ± 0.15 4.1 min 5.75 ± 0.15 14.4 ± 0.30 3000 2500 2000
B E-2506A 25.3 ± 0.50 9.5 ± 0.25 6.35 ± 0.25 6.35 ± 0.25 6.1 min 6.32 ± 0.13 19.02 ± 0.38 4000 3500 2500
B E-2506C 25.4 ± 0.50 16 ± 0.25 6.35 ± 0.25 12.8 ± 0.25 6.07 min 6.35 ± 0.15 19.04 ± 0.40 2750 2150 1750
B E-3007B 30.1 ± 0.70 15 ± 0.20 7.05 ± 0.25 10 ± 0.30 6.15 min 6.95 ± 0.25 19.9 ± 0.40 4660 3800 3200
B E-3509A 34.9 ± 0.70 14.4 ± 0.25 9.15 ± 0.25 9.9 ± 0.25 8 min 9.2 ± 0.25 26 ± 0.50 5300 4700 4000
C U-1105A 10.5 ± 0.40 7.8 ± 0.20 5 ± 0.15 5.25 ± 0.25 5 min 1600 1300 1100
C U-1204A 12 ± 0.55 9.2 ± 0.30 3.95 ± 0.15 5.05 ± 0.15 3.45 min 1850 1600 1250
C U-1506A 15.2 ± 0.70 11.2 ± 0.50 6.45 ± 0.25 6.05 ± 0.35 5.2 ± 0.30 3000 2400 2150
C U-1606A 15.7 ± 0.50 9.9 ± 0.20 6 ± 0.20 6.2 ± 0.25 6.5 min 2400 2000 1700
C U-1706B 17 ± 0.70 16.6 ± 0.20 5.95 ± 0.20 12.2 ± 0.40 7 min 1920 1600 1300
C U-2007A 21 ± 0.60 15.3 ± 0.50 7.5 ± 0.30 8.25 ± 0.25 6.3 ± 0.30 4220 3100 2800
ST and SQ Cores
See a b c d g h i (AL nH ± 25%)
Fig. P/N mm mm mm mm mm mm mm A3 A4
D ST2805A 28.45 ± 0.55 28.45 ± 0.55 5 ± 0.30 22.65 ± 0.45 5 ± 0.20 22.65 ± 0.45 3600 2900
E SQ2005A 14.10 ± 0.25 20.60 ± 0.30 4.6 ± 0.20 16 ± 0.30 4.20 ± 0.20 7.50 ± 0.15 2.40 ± 0.20 2200 1750

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #160. Visit our website http://www.avxcorp.com

160
Soft Ferrites
Power Applications
UPS / High Power
Fig. 1 Fig. 2 Fig. 3 Fig. 4
b
b d
d c j c
g ha
Id Od Id Od
h a f
h a

d c h
b
c

U and I Cores
Materials
(AL nH ± 25%)
See Fig. P/N a b c d h j B1 B2
mm mm mm mm mm mm
1 U-9316A 93 ± 1.80 76 ± 0.50 16 ± 0.50 48 ± 0.90 34.6 min. 3200 2900
IU9316A 93 ± 1.80 16 ± 0.50 27.5 ± 0.50
1 U-9320A 93 ± 1.80 76 ± 0.50 20 ± 0.50 48 ± 0.90 34.6 min. 4000 3600
IU9320A 93 ± 1.80 20 ± 0.50 27.5 ± 0.50
1 U-9330A 93 ± 1.80 76 ± 0.50 30 ± 0.60 48 ± 0.90 34.6 min. 6000 5450
IU9330A 93 ± 1.80 30 ± 0.60 27.5 ± 0.60
1 U--102A 101.6 ± 2.00 57.1 ± 0.40 25.4 ± 0.80 31.7 ± 0.75 50.8 ± 3.60 5200 4700
IU--102A 101.6 ± 2.00 25.4 ± 0.80 25.3 ± 0.50
1 U--126A 126 ± 4.00 91 ± 1.00 20 ± 0.60 63 ± 2.00 70 ± 2.00 3000 2700
IU--126A 126 ± 4.00 20 ± 0.60 28 ± 1.00
2 U--141A 141 ± 5.00 78.5 ± 1.00 15 ± 1.00 33.5 ± 1.00 50 min. 4500
2 U--141B 141 ± 5.00 78.5 ± 1.00 30 ± 1.00 33.5 ± 1.00 51 min. 9000

E Cores
Materials
(AL nH ± 25%)
See Fig. P/N a b c d f g h B1 B2
mm mm mm mm mm mm mm
3 E-5521A 55.15 ± 1.05 27.5 ± 0.30 20.7 ± 0.30 18.8 ± 0.30 10.15 min. 16.95 ± 0.25 38.1 ± 0.60 7200 5400
3 E-5525A 55.15 ± 1.05 27.5 ± 0.30 24.7 ± 0.30 18.8 ± 0.30 10.15 min. 16.95 ± 0.25 38.1 ± 0.60 8600 6880
3 E-6527A 65.15 ± 1.35 32.5 ± 0.30 27.1 ± 0.30 22.6 ± 0.40 12.1 min. 19.65 ± 0.35 44.95 ± 0.75 10000 7700
3 E-7032A 70.5 ± 1.00 32.95 ± 0.25 31.6 ± 0.40 22.25 ± 0.35 13 min. 21.65 ± 0.35 48.75 ± 0.75 11500 9800
3 E-8020A 80 ± 1.80 38.1 ± 0.40 19.8 ± 0.40 28.3 ± 0.40 19.35 min. 19.8 ± 0.40 60.2 ± 1.30 5300 4600

Toroids
Materials
(AL nH ± 25%)
See Fig. P/N Od Id h B1 B2 A6
mm mm mm
4 T-5000A 50 ± 1.50 15 ± 0.45 10 ± 0.35 6050 4600 9650
4 T-5600A 55.4 ± 1.95 32.35 ± 1.15 18 ± 0.75 4850 3700 7700
4 T-6300A 63 ± 2.00 38 ± 1.20 25 ± 0.80 6300 4750 10000
4 T-6700A 67 ± 2.00 15 ± 0.50 20 ± 0.60 12500 11500 24000
4 T-7500A 75 ± 2.00 23 ± 0.50 20 ± 0.70 11000 8950 19000
4 T-8000A 80 ± 2.80 40 ± 1.40 15 ± 0.60 5000 3950 8000
4 T--100B 100 ± 3.50 55 ± 1.95 20 ± 0.80 5000 4550 9550
4 T--100C 100 ± 3.50 67 ± 2.00 20 ± 0.80 3900 2950 6250
4 T--124A 124.5 ± 3.50 42 ± 1.50 16 ± 1.00 8600 6650 14000
4 T--152A 152 ± 5.00 68.5 ± 2.00 19 ± 0.50 6600 5750 12000
4 T--152C 152 ± 5.00 104 ± 3.60 19 ± 0.80 3600 2750 5800

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #161. Visit our website http://www.avxcorp.com

161
Soft Ferrites
Power Applications
Switch Mode Power Supply
Fig. 5 Fig. 6 Fig. 7 Fig. 8
b
b d c h2
d = =
a

g ha

g h a gha f b d3 d2

d c j c = =
c b e h1
i

E Cores
Materials
(AL nH ± 25%)
See Fig. P/N a b c d f g h B1 B2 F1 F2 Bobbin
mm mm mm mm mm mm mm available
ETD cores
5 ET2910A 29.8 ± 0.80 15.8 ± 0.20 9.5 ± 0.30 11 ± 0.30 9.5 ± 0.30 22.7 ± 0.70 2350 1950 2400 2100 •
5 ET3411A 34.2 ± 0.80 17.3 ± 0.20 10.8 ± 0.30 12.1 ± 0.30 10.8 ± 0.30 26.3 ± 0.70 2850 2250 2800 2400 •
5 ET3913A 39.1 ± 0.90 19.8 ± 0.20 12.5 ± 0.30 14.6 ± 0.40 12.5 ± 0.30 30.1 ± 0.80 3150 2470 3200 2700 •
5 ET4415A 44 ± 1.00 22.3 ± 0.20 14.8 ± 0.40 16.5 ± 0.40 14.8 ± 0.40 33.3 ± 0.80 3900 3100 – 3400 •
5 ET4916A 48.7 ± 1.10 24.7 ± 0.20 16.3 ± 0.40 18.1 ± 0.40 16.3 ± 0.40 37 ± 0.90 4500 3525 – – •
5 ET5419A 54.5 ± 1.30 27.6 ± 0.20 18.9 ± 0.40 20.2 ± 0.40 18.9 ± 0.40 41.2 ± 1.10 5900 4400 – –
See Fig. P/N a b c d f g h B1 B2 F2 F4
EFD cores
6 EF1505A 15 ± 0.40 7.5 ± 0.15 4.65 ± 0.15 5.5 ± 0.25 5.3 ± 0.15 11 ± 0.35 – 700 695 435 •
6 EF2007A 20 ± 0.55 10 ± 0.15 6.65 ± 0.15 7.7 ± 0.25 8.9 ± 0.20 15.4 ± 0.50 – 1150 1100 670 •
6 EF2509A 25 ± 0.65 12.5 ± 0.15 9.1 ± 0.20 9.3 ± 0.25 11.4 ± 0.20 18.7 ± 0.60 – 1800 1850 1100 •
6 EF3009A 30 ± 0.80 15 ± 0.15 9.1 ± 0.20 11.2 ± 0.30 14.6 ± 0.25 22.4 ± 0.75 – 1900 1650 1150 •
See Fig. P/N a b c d f g h B1 B2 F1
E cores
7 E-1905A 19.15 ± 0.75 7.9 ± 0.25 4.8 ± 0.20 5.6 ± 0.15 4.82 min. 4.65 ± 0.15 14.75 ± 0.30 1140 900 1050 •
7 E-2006A 20 ± 0.40 9.95 ± 0.15 5.7 ± 0.20 7.15 ± 0.15 4.1 min. 5.75 ± 0.15 14.4 ± 0.30 1450 1160 1250 •
7 E-2506A 25.3 ± 0.50 9.5 ± 0.25 6.35 ± 0.25 6.35 ± 0.25 6.1 min. 6.32 ± 0.125 19.02 ± 0.38 1950 1540 1650 •
7 E-2507A 25.4 ± 0.40 12.6 ± 0.20 7.28 ± 0.22 8.9 ± 0.20 4.87 min. 7.5 ± 0.15 17.65 ± 0.25 2200 1760 2050 •
7 E-3007B 30.1 ± 0.70 15 ± 0.20 7.05 ± 0.25 10 ± 0.30 6.15 min. 6.95 ± 0.25 19.9 ± 0.40 2000 1600 2000
7 E-3109B 30.5 ± 0.60 13.4 ± 0.15 9.1 ± 0.30 9.05 ± 0.15 6.20 min. 9.1 ± 0.30 22.2 ± 0.40 2900 2600 2600
7 E-3509A 34.9 ± 0.70 14.4 ± 0.25 9.15 ± 0.25 9.9 ± 0.25 8 min. 9.2 ± 0.25 26 ± 0.50 3000 2400 2600 •
7 E-4112A 40.7 ± 0.80 16.4 ± 0.25 12.45 ± 0.25 10.5 ± 0.25 7.95 min. 12.45 ± 0.25 29.1 ± 0.50 4700 4000 4400
7 E-4215A 42.15 ± 0.85 21 ± 0.20 14.95 ± 0.25 15.15 ± 0.35 8.65 min. 11.95 ± 0.25 30.1 ± 0.60 5000 3750 – •
7 E-4220A 42.15 ± 0.85 21 ± 0.20 19.5 ± 0.50 15.15 ± 0.35 8.65 min. 11.95 ± 0.25 30.1 ± 0.60 6500 4875 – •
7 E-4916A 48.85 ± 0.75 20.6 ± 0.20 15.6 ± 0.40 12.11 ± 0.20 7.95 min. 15.6 ± 0.25 32.4 ± 0.65 7000 5600 – •
See Fig. P/N a b c d f g h j B1 B2
EI cores
7 EI2206A 22 ± 0.45 15 ± 0.20 5.75 ± 0.25 11 ± 0.25 4.98 min. 5.75 ± 0.25 16.3 ± 0.35 4 ± 0.20 1760 1400
7 EI2506C 25.4 ± 0.50 16 ± 0.26 6.35 ± 0.25 12.83 ± 0.25 6.07 min. 6.35 ± 0.15 19.04 ± 0.40 3.18 ± 0.20 1900 1450
7 EI2811A 28 ± 0.55 17 ± 0.20 10.75 ± 0.20 12.5 ± 0.30 5.55 min. 7.25 ± 0.25 18.85 ± 0.25 3.5 ± 0.20 3960 3200
7 EI3011B 30.25 ± 0.60 21.3 ± 0.20 10.65 ± 0.35 16.3 ± 0.30 4.55 min. 10.65 ± 0.25 20.35 ± 0.35 5.5 ± 0.20 4230 3600
7 EI3313A 33 ± 0.65 23.3 ± 0.30 12.7 ± 0.30 19.05 ± 0.40 6.59 min. 9.55 ± 0.20 23.5 ± 0.58 5 ± 0.20 4200 3190
7 EI3510B 34.9 ± 0.70 23.8 ± 0.25 9.52 ± 0.40 19.05 ± 0.40 7.61 min. 9.52 ± 0.20 25.43 ± 0.50 4.75 ± 0.20 3150 2500
7 EI3512C 35.15 ± 0.65 23.45 ± 0.35 11.7 ± 0.30 18.3 ± 0.30 7.15 min. 10 ± 0.30 24.6 min. 5.5 ± 0.20 3400 3450
7 EI4012D 40 ± 0.50 27.25 ± 0.25 11.65 ± 0.35 20.25 ± 0.25 8.25 min. 11.65 ± 0.35 29 ± 0.50 7.5 ± 0.30 5000 4000
7 EI4215B 42.8 ± 0.85 21.1 ± 0.20 15.47 ± 0.25 15.11 ± 0.35 9.11 min. 11.9 ± 0.25 30.97 ± 0.60 5.97 ± 0.20 7100 5150
See Fig. P/N a b c d f g h f B1 B2
ER cores
5 ER2811A 28.55 ± 0.55 16.9 ± 0.25 11.4 ± 0.25 12.53 ± 0.28 9.9 ± 0.25 21.6 ± 0.40 2700 2400
5 ER3411A 34.2 ± 0.80 13 ± 0.20 10.8 ± 0.30 7.8 ± 0.30 10.8 ± 0.30 26.3 ± 0.70 3200 2900
5 ER3511A 35 ± 0.90 20.3 ± 0.20 11.3 ± 0.40 14.8 ± 0.40 11.3 ± 0.35 26.4 ± 0.90 3200 2600
5 ER3913D 39.1 ± 0.90 22.2 ± 0.20 12.5 ± 0.30 17 ± 0.35 12.5 ± 0.30 30.1 ± 0.80 3000 2500
5 ER4013A 40 ± 0.90 22.4 ± 0.20 13.3 ± 0.25 15.45 ± 0.30 13.3 ± 0.25 29.7 ± 0.70 4200 3250
5 ER4215A 42 ± 0.60 21.6 ± 0.20 14.7 ± 0.30 15.9 ± 0.30 14.7 ± 0.30 31 ± 0.50 4400 3500

RM Cores
Materials
(AL nH ± 25%)
See Fig. P/N a b c h1 h2 d2 d3 h2 B2 F2 Bobbin
mm mm mm mm mm mm mm available
8 RM0500B 12.05 ± 0.25 14.3 ± 0.30 10 max. 10.4 ± 0.10 6.5 ± 0.20 10.4 ± 0.20 4.8 ± 0.10 6.5 ± 0.20 1600 1450 •
8 RM0600B 14.4 ± 0.30 17.3 ± 0.30 10.75 max. 12.4 ± 0.10 8.2 ± 0.20 12.65 ± 0.25 6.3 ± 0.10 8.2 ± 0.20 2000 2000 •
8 RM0800B 19.25 ± 0.45 22.75 ± 0.45 15.7 max. 16.3 ± 0.20 11.2 ± 0.40 17.3 ± 0.30 8.4 ± 0.15 11.2 ± 0.40 3100 2800 •
8 RM1000B 24.15 ± 0.55 27.85 ± 0.65 18.6 ± 0.10 12.7 ± 0.30 21.65 ± 0.45 10.7 ± 0.20 12.7 ± 0.30 3800 3800 •
8 RM1400B 34.1 ± 0.6 41.5 ± 0.70 28.9 ± 0.10 21.1 ± 0.30 29.6 ± 0.60 14.7 ± 0.30 10.55 ± 0.15 5200 5200 •
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #162. Visit our website http://www.avxcorp.com

162
Soft Ferrites
Power Applications
Consumer TV & Monitors
Fig. 9 Fig. 10 Fig. 11
b b
g b
d d g d c

a a g h
h h a

i i
c c

UR Cores Are Available In Materials B3, B5, B7 and F1

Effective core parameters
See Fig. P/N a b c d g h i Ie Ae c
mm mm mm mm mm mm mm mm mm2 nH
10 UR2810A 28 ± 0.60 15.75 ± 0.25 10 ± 0.30 11 ± 0.30 10 ± 0.30 13 ± 0.30 5 ± 0.10 85 50 0.74
9 UR2814A 28.8 max. 20.25 ± 0.25 13.5 ± 0.30 13.25 ± 0.25 11.2 ± 0.30 9 ± 0.50 7.5 ± 0.30 97 98 1.27
9 UR2820A 28.45 ± 0.60 16.2 ± 0.20 19.6 ± 0.40 11 ± 0.40 12.5 ± 0.30 10.6 ± 0.40 5.35 ± 0.15 87 109 1.6
9 UR3012C 30 ± 0.80 21.7 ± 0.20 12 ± 0.40 15.6 min. 10 ± 0.30 15 ± 0.70 5 ± 0.20 113 68 0.75
9 UR3012D 30 ± 0.80 25.9 ± 0.20 12 ± 0.40 20.2 ± 0.45 10 ± 0.30 15 ± 0.70 5 ± 0.20 130 68 0.65
10 UR3110B 31.5 ± 0.80 22.5 ± 0.30 10 ± 0.30 14 ± 0.25 10 ± 0.30 13.5 ± 0.50 8 nomi 109 78 0.9
10 UR3110D 31.5 ± 0.80 20.2 ± 0.25 10 ± 0.30 11.7 ± 0.25 10 ± 0.30 13.5 ± 0.50 8 nomi 100 78 1
10 UR3513A 35.4 ± 1.00 27.5 ± 0.30 13.1 ± 0.40 17.5 ± 0.30 13 ± 0.30 12 min. 10 ± 0.30 127 129 1.30
10 UR3513B 35.15 ± 1.00 30.8 ± 0.30 12.8 ± 0.30 20.5 ± 0.50 12.7 ± 0.30 13.05 min. 9.3 ± 0.30 141 121 1.08
10 UR3513D 35.15 ± 1.00 34.3 ± 0.50 12.8 ± 0.30 24 ± 0.50 12.7 ± 0.30 13.05 min. 9.3 ± 0.30 156 124 1
10 UR3713A 37.2 ± 1.00 29.4 ± 0.30 13.1 ± 0.40 18.9 ± 0.30 13 ± 0.30 13.2 min. 10.5 ± 0.20 136 133 1.23
9 UR3718B 36.9 ± 0.80 25.5 ± 0.40 18 ± 0.40 16.8 min. 14.7 ± 0.30 14.9 ± 1.00 7.3 ± 0.20 127 149 1.47
9 UR3718C 36.9 ± 0.80 28.8 ± 0.20 18 ± 0.40 20.3 ± 0.40 14.7 ± 0.30 14.9 ± 1.00 7.3 ± 0.20 140 149 1.33
10 UR3814A 37.5 ± 0.80 31.8 ± 0.30 14.1 ± 0.30 21.3 ± 0.40 14 ± 0.30 13 ± 0.50 10.5 ± 0.30 145 145 1.26
10 UR3915A 38.7 ± 1.00 35.2 ± 0.50 15.1 ± 0.40 24.8 ± 0.50 15 ± 0.40 15 ± 1.00 9.1 ± 0.30 164 148 1.13
10 UR4014A 40 ± 0.80 30.2 ± 0.30 14.1 ± 0.30 18.4 ± 0.40 14 ± 0.30 14.5 ± 0.40 11.5 ± 0.30 140 156 1.4
9 UR4022A 40.1 max. 31.9 ± 0.20 22 ± 0.50 23.9 ± 0.40 15.05 ± 0.25 15.6 ± 1.00 8 ± 0.20 158 177 1.4
10 UR4115A 40.8 ± 0.80 33.7 ± 0.30 14.6 ± 0.40 21.8 ± 0.40 14.5 ± 0.30 13.8 min. 12 ± 0.25 154 165 1.35
10 UR4215A 42.2 ± 0.85 36.3 ± 0.30 15.1 ± 0.30 24 min. 15 ± 0.30 14.5 min. 12 ± 0.25 168 178 1.35
10 UR4216B 43.2 max. 34 ± 0.20 15.9 ± 0.40 24 ± 0.40 15.8 ± 0.25 16.35 ± 0.65 9.6 ± 0.30 163 166 1.3
10 UR4316A 43.2 ± 0.90 29.5 ± 0.30 16.1 ± 0.30 17.5 ± 0.40 16 ± 0.30 15.2 ± 0.80 12 ± 0.30 140 190.3 1.71
10 UR4618A 46 ± 1.00 38.8 ± 0.30 17.9 ± 0.40 25.8 ± 0.30 17.8 ± 0.30 14.65 min. 13 ± 0.30 142 238 2.1
10 UR4916A 48.5 ± 1.00 39 ± 0.30 16.1 ± 0.40 25.9 ± 0.50 16 ± 0.30 18.9 min. 13 ± 0.25 186 207 1.4
9 UR5536A 54.9 ± 1.10 37.5 ± 0.25 36 ± 0.70 25.5 ± 0.40 23.5 ± 0.45 20 ± 0.40 12 ± 0.25 188 418 2.8
UR cores with grooves are available, contact your local representative for detailed specifications.

E Cores
Materials
(AL ± 25%)
See Fig. P/N a b c d g h B1 B2 B3 F1 Bobbin
mm mm mm mm mm mm available
ETD cores
5 ET2910A 29.8 ± 0.80 15.8 ± 0.20 9.5 ± 0.30 11 ± 0.30 9.5 ± 0.30 22.7 ± 0.70 2350 1950 2100 2400 •
5 ET3411A 34.2 ± 0.80 17.3 ± 0.20 10.8 ± 0.30 12.1 ± 0.30 10.8 ± 0.30 26.3 ± 0.70 2850 2250 2400 2800 •
5 ET3913A 39.1 ± 0.90 19.8 ± 0.20 12.5 ± 0.30 14.6 ± 0.40 12.5 ± 0.30 30.1 ± 0.80 3150 2470 2700 3200 •
5 ET4415A 44 ± 1.00 22.3 ± 0.20 14.8 ± 0.40 16.5 ± 0.40 14.8 ± 0.40 33.3 ± 0.80 3900 3100 3400 •
5 ET4916A 48.7 ± 1.10 24.7 ± 0.20 16.3 ± 0.40 18.1 ± 0.40 16.3 ± 0.40 37 ± 0.90 4500 3525 3900 •
5 ET5419A 54.5 ± 1.30 27.6 ± 0.20 18.9 ± 0.40 20.2 ± 0.40 18.9 ± 0.40 41.2 ± 1.10 5900 4400 4700
ER cores
5 ER2811A 28.55 ± 0.55 16.9 ± 0.25 11.4 ± 0.25 12.53 ± 0.28 9.9 ± 0.25 21.6 ± 0.40 2700 1650 2650
5 ER3411A 34.2 ± 0.80 13 ± 0.20 10.8 ± 0.30 7.8 ± 0.30 10.8 ± 0.30 26.3 ± 0.70 3200 2900 3400
5 ER3511A 35 ± 0.90 20.3 ± 0.20 11.3 ± 0.40 14.8 ± 0.40 11.3 ± 0.35 26.4 ± 0.90 3200 2400 2800
5 ER3913D 39.1 ± 0.90 22.2 ± 0.20 12.5 ± 0.30 17 ± 0.35 12.5 ± 0.30 30.1 ± 0.80 3000 2500 2950
5 ER4013A 40 ± 0.90 22.4 ± 0.20 13.3 ± 0.25 15.45 ± 0.30 13.3 ± 0.25 29.7 ± 0.70 4200 2700 3800
5 ER4215A 42 ± 0.60 21.6 ± 0.20 14.7 ± 0.30 15.9 ± 0.30 14.7 ± 0.30 31 ± 0.50 4400 3500 4200
ED cores
11 ED2912B 29.3 ± 0.80 14.6 ± 0.25 11.9 ± 0.25 11 ± 0.20 8.4 ± 0.20 22 ± 0.40 2200 2400 2750
11 ED2912C 29.3 ± 0.80 10.2 ± 0.25 11.9 ± 0.25 6.6 ± 0.20 8.4 ± 0.20 22 ± 0.40 2950 2950 3400
11 ED2912D 29.3 ± 0.80 12.2 ± 0.25 11.9 ± 0.25 8.6 ± 0.20 8.4 ± 0.20 22 ± 0.40 2450 2500 3100

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #163. Visit our website http://www.avxcorp.com

163
Soft Ferrites
Power Applications
Electronic Ballast
Fig. 12 Fig. 13

g ha
Id Od Id Od
f

d c
h
b

E Cores
Materials
(AL ± 25%)
See P/N a b c d f g h B1 B2 F1 Bobbin
Fig. mm mm mm mm min mm mm mm available
12 E-1304A 12.8 ± 0.20 6.4 ± 0.10 3.55 ± 0.15 4.65 ± 0.15 2.6 3.55 ± 0.15 9.2 ± 0.30 840 720 1250
12 E-1306A 13 ± 0.45 6 ± 0.20 6.15 ± 0.20 4.65 ± 0.15 3.64 2.78 ± 0.18 10.48 ± 0.25 1040 850 920
12 E-1605A 16 ± 0.50 7.15 ± 0.20 4.9 ± 0.20 5.1 ± 0.20 3.8 4 ± 0.15 12 ± 0.25 1150 1000 1000
12 E-1605B 16 ± 0.50 12.25 ± 0.20 4.85 ± 0.20 10.25 ± 0.25 3.75 4 ± 0.20 12 ± 0.30 700 640
12 E-1605C 16.1 ± 0.60 8.05 ± 0.15 4.5 ± 0.20 5.9 ± 0.20 3.3 4.55 ± 0.15 11.6 ± 0.30 1240 875
12 E-1905A 19.15 ± 0.75 7.9 ± 0.25 4.8 ± 0.20 5.6 ± 0.15 4.82 4.65 ± 0.15 14.75 ± 0.30 1140 900 1050 •
12 E-1907A 19.15 ± 0.75 7.9 ± 0.25 6.65 ± 0.25 5.6 ± 0.15 4.82 4.65 ± 0.15 14.75 ± 0.30 1600 1300 •
12 E-2005B 19.5 ± 0.40 13.55 ± 0.20 5 ± 0.25 11.15 ± 0.20 4.5 4.55 ± 0.15 14 ± 0.30 920 745
12 E-2006A 20 ± 0.40 9.95 ± 0.15 5.7 ± 0.20 7.15 ± 0.15 4.1 5.75 ± 0.15 14.4 ± 0.30 1450 1160 1250 •
12 E-2206A 22 ± 0.45 15 ± 0.20 5.75 ± 0.25 11 ± 0.25 4.98 5.75 ± 0.25 16.3 ± 0.35 1250 1000
12 E-2506A 25.3 ± 0.50 9.5 ± 0.25 6.35 ± 0.25 6.35 ± 0.25 6.1 6.32 ± 0.125 19.02 ± 0.38 1950 1540 1650 •
12 E-2506B 25.3 ± 0.50 9.9 ± 0.25 6.35 ± 0.25 6.75 ± 0.25 6.1 6.32 ± 0.125 19.02 ± 0.38 2000 1600
12 E-2506C 25.4 ± 0.50 16 ± 0.25 6.35 ± 0.25 12.83 ± 0.25 6.07 6.35 ± 0.15 19.04 ± 0.40 1350 1150 1250
12 E-2507A 25.4 ± 0.40 12.6 ± 0.20 7.28 ± 0.22 8.9 ± 0.20 4.87 7.5 ± 0.15 17.65 ± 0.25 2200 1760 2050 •
12 E-2507B 25.4 ± 0.50 16 ± 0.26 6.5 ± 0.25 12.83 ± 0.25 6.07 6.35 ± 0.15 19.04 ± 0.40 1300 1200
12 E-2811A 28 ± 0.55 17 ± 0.20 10.75 ± 0.20 12.5 ± 0.30 5.55 7.25 ± 0.25 18.85 ± 0.25 2700 2400
12 E-3007B 30.1 ± 0.70 15 ± 0.20 7.05 ± 0.25 10 ± 0.30 6.15 6.95 ± 0.25 19.9 ± 0.4 2000 1600 2000
12 E-3011A 30 ± 0.60 13.15 ± 0.20 10.7 ± 0.30 8.15 ± 0.15 4.38 10.7 ± 0.25 20 ± 0.30 4700 3500
12 E-3109B 30.5 ± 0.60 13.4 ± 0.15 9.1 ± 0.30 9.05 ± 0.15 6.2 9.1 ± 0.30 22.2 ± 0.40 2900 2600 2600
12 E-3213A 31.9 ± 1.00 14 ± 0.40 12.7 ± 0.30 9.65 ± 0.25 6.4 8.9 ± 0.25 22.77 ± 0.77 4000 3200 3750 •
12 E-3509A 34.9 ± 0.70 14.4 ± 0.25 9.15 ± 0.25 9.9 ± 0.25 8 9.2 ± 0.25 26 ± 0.50 3000 2400 2600 •
12 E-3509B 34.9 ± 0.70 14.4 ± 0.25 9.15 ± 0.25 9.8 ± 0.25 7.9 9.2 ± 0.25 25.75 ± 0.50 3000 2500
12 E-3510A 34.9 ± 0.70 14.4 ± 0.25 9.7 ± 0.20 9.9 ± 0.25 8.03 9.2 ± 0.25 26 ± 0.50 3000 2500
12 E-3510B 34.9 ± 0.70 23.8 ± 0.25 9.52 ± 0.40 19.05 ± 0.40 7.61 9.52 ± 0.20 25.43 ± 0.50 2100 1750
12 E-3512A 34.9 ± 0.70 14.4 ± 0.25 12 ± 0.25 9.8 ± 0.25 7.9 9.2 ± 0.25 25.75 ± 0.50 3750 3000
12 E-3512B 34.9 ± 0.70 23.8 ± 0.25 12 ± 0.40 19.05 ± 0.40 7.61 9.52 ± 0.20 25.43 ± 0.50 2100
12 E-4012B 40.5 ± 0.40 27.25 ± 0.25 11.65 ± 0.35 20.25 ± 0.40 7.78 11.65 ± 0.25 28 ± 0.55 3250 2550
12 E-4012C 39.9 ± 0.80 17.3 ± 0.15 11.87 ± 0.20 10.20 ± 0.20 7.8 11.65 ± 0.25 28.05 ± 0.55 4900 3750
12 E-4112A 40.7 ± 0.80 16.4 ± 0.25 12.45 ± 0.25 10.5 ± 0.25 7.95 12.45 ± 0.25 29.1 ± 0.50 4700 4000 4400
12 E-4215A 42.15 ± 0.85 21 ± 0.20 14.95 ± 0.25 15.15 ± 0.35 8.65 11.95 ± 0.25 30.1 ± 0.60 5000 3750 •
12 E-4215H 42.3 ± 0.85 21.4 ± 0.20 15 ± 0.25 15.4 ± 0.35 8.75 12 ± 0.25 30.3 ± 0.60 4875 3650
12 E-4220A 42.15 ± 0.85 21 ± 0.20 19.5 ± 0.50 15.15 ± 0.35 8.65 11.95 ± 0.25 30.1 ± 0.60 6500 4875 •
12 E-4220H 42.3 ± 0.85 21.4 ± 0.20 19.6 ± 0.40 15.4 ± 0.35 8.75 12 ± 0.25 30.3 ± 0.60 6475 4875

Toroids
Materials
Dimensions for uncoated toroids Dimensions for coated toroids (AL nH ± 25%)
See P/N Od Id h Od Id h B2 F1
Fig. mm mm mm mm mm mm
13 TR1270A 12.7 ± 0.40 7.14 ± 0.25 4.7 ± 0.20 13.9 max. 6.09 min. 5.7 max. 870 1100
13 TR2000B 20 ± 0.60 10 ± 0.30 7 ± 0.25 21.4 max. 8.9 min. 8.05 max. 1600 1950
13 TR2000D 20 ± 0.60 10.5 ± 0.35 15 ± 0.55 21.4 max 9 min. 16.35 max. 3100 3900
13 TR2210A 22.1 ± 0.65 13.72 ± 0.40 12.7 ± 0.45 23.55 max. 12.52 min. 13.95 max. 2000 2450
13 TR2500A 25 ± 0.75 15 ± 0.45 10 ± 0.35 26.55 max. 13.75 min. 11.15 max. 1750 2050
13 TR2500B 25 ± 0.75 15 ± 0.45 15 ± 0.55 26.55 max. 13.75 min. 16.35 max. 2550 3100
13 TR2800B 27.6 ± 0.60 17.6 ± 0.40 15.4 ± 0.30 29 max. 16.4 min. 16.5 max. 2050 2750
13 TR2800C 27.6 ± 0.60 17.6 ± 0.40 7 ± 0.20 29 max. 16.4 min. 8 max. 1000 1300
13 TR3150C 31.5 ± 0.95 19 ± 0.60 20 ± 0.70 33.25 max. 17.65 min. 21.5 max. 3400 4100
13 TR3600A 36 ± 1.10 23 ± 0.70 15 ± 0.55 37.9 max. 21.5 min. 16.35 max. 2200 2700
13 TR4000A 40 ± 1.20 24 ± 0.70 16 ± 0.50 42 max. 22.45 min. 17.4 max. 2750 3300
Coating : ➩ Polyamide or Epoxy (contact your local representative)
➩ Thickness : < 0.4 mm (to be added on mechanical dimensions)
➩ Breakdown voltage > 2000 VDC

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #164. Visit our website http://www.avxcorp.com

164
2mm Hard Metric Connectors
Series 8071 Type A Right Angle Female
27 8071 110 011 833 = Type A Right Angle Female with top shield, with pegs
27 8071 110 012 833 = Type A Right Angle Female with top shield, without pegs
Contact Elco for availability of alternate platings
0
49.9 -0.2

25 15 11 1
e
(20.9)

11.4
c
b
9Z21XX a

TYP.

2X4=8.0
2.0 TYP.

2.0
2X10=20.0 2X10=20.0
2x24=48.0 0.95 MAX.
2x5=10.0±0.1
2.0±0.1 TYP.

135- f 0.6±0.05
HOLES

f
e
7.4
d 3.0

12.25
c
b
3.2 3.5
a
a bc d e f
MAX.

2.0±0.1 TYP. 12.8 6.0

2x10=20.0±0.1
.1
LE .0±0
1.5

2x12=24.0±0.1
HO -f 2

2x14=28.0±0.1
2

2x24=48.0±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Series 8071 Type B Right Angle Female

27 8071 110 010 833 = Type B 110 Pin Right Angle Female with upper shield
Contact Elco for availability of alternate platings
43.9 -0.2

22 1
9Z21XX e
d
c
11.4
(20.9)

b
a
TYP.

2X4=8.0

2.0 TYP.
2.0

42.0 0.95 MAX.

2 x 5=10.0±0.1
2.0±0.1 TYP.

132- f 0.6±0.05
HOLES

f
e
7.4

d
3.0

c
b
3.2

a
1.5 MAX.

2.0±0.1 TYP.
2.0 TYP.
2X (N/5-1) = A±0.1
1.8 2X5=10.0

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #165. Visit our website http://www.avxcorp.com

ELCO 165
2mm Hard Metric Connectors
Series 8071 Type B Right Angle Female
27 8071 095 010 833 = Type B 95 Pin Right Angle Female with upper shield
Contact Elco for availability of alternate platings

37.9 -0.2

19 1
e
9Z21XX d
c

11.4
(20.9)
b
a

TYP.

2X4=8.0
2.0 TYP.

2.0
36.0 0.95 MAX.
2 x 5=10.0±0.1
2.0±0.1 TYP.

114- f 0.6±0.05
HOLES

7.4
f

3.0
e
d
c

3.2
b
a

2.0 TYP.
1.5 MAX.

2.0±0.1 TYP.
1.8 2X5=10.0
2X (N/5-1) = A±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Series 8071 Type B Right Angle Female

27 8071 125 010 833 = Type B 125 Pin Right Angle Receptacle with upper shield
Contact Elco for availability of alternate platings

49.9 -0.2

25 1
9Z21XX e
d
c
11.4
(20.9)

b
a
TYP.

2X4=8.0

2.0 TYP.
2.0

48.0 0.95 MAX.

2 x 5=10.0±0.1
2.0±0.1 TYP.

150- f 0.6±0.05
HOLES

f
e
7.4

d
3.0

c
b
3.2

a
1.5 MAX.

2.0±0.1 TYP.
2.0 TYP.
48.0 ±0.1
1.8 2X5=10.0

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #166. Visit our website http://www.avxcorp.com

166 ELCO
2mm Hard Metric Connectors
Series 8071 Type A Right Angle Female with Split Shield
27 8071 090 501 833 = Type A Right Angle Female with upper shield, with peg
27 8071 090 502 833 = Type A Right Angle Female with upper shield, without peg
Contact Elco for availability of alternate platings

0
49.9 -0.2

8N21XX 25 15 11 1
e

(20.9)
d

11.4
c
b
a

TYP.

2X4=8.0
2.0
2.0 TYP.

2X10=20.0 2X10=20.0
2X24=48 0.95 MAX.
2X5=10.0±0.1
2.0±0.1 TYP.

0
99- f 0.6 -0.05
HOLES

f
e
d
c

7.6
12.25

3.0
b
a
2.0±0.1 TYP.

3.2

3.5
MAX.

2X7=14.0±0.1
1
.
1.5

LE .0±0

2X10-20.0±0.1
HO -f 2

2X12-24.0±0.1 2.0 TYP.

2

2X14-28.0±0.1 1.8 2X5=10.0

2X24=48.0±0.1

Series 8071 Type C Right Angle Female

27 8071 055 011 833 = Type C 55 Pin Right Angle Female with upper shield, with peg
27 8071 055 012 833 = Type C 55 Pin Right Angle Female with upper shield, without peg
Contact Elco for availability of alternate platings

0
24.95 -0.2

11 1
e
7.4

9Z21XX
3.0

d
ELCO 8071
55P

11.4

c
(20.9)

b
3.2

3.5

a
2X4=8.0
TYP.

2.0 TYP.
2.0

2.0 TYP.
1.8 2X5=10.0

2X10=20.0 0.95 MAX.

011
2X5=10.0±0.1
2.0±0.1 TYP.

66- f0.6±0.05
HOLES

f
e
d
7.4
3.0

c
b
a
3.2

2.0±0.1 TYP.
1.5 MAX.

1
0.
0± 3.0±0.1 2X10-20.0±0.1
2. E
2- OL 2.0
f

TYP.

H
RECOMMENDED P.C. BOARD LAYOUT 1.8 2X5=10.0
(COMPONENT SIDE)
012

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #167. Visit our website http://www.avxcorp.com

ELCO 167
2mm Hard Metric Connectors
Series 8071 Type A Vertical Male Feed-To
17 8071 154 001 833 = P1 110 signal contacts and 44 ground contacts, Short Tail, Std cPCI
Contact Elco for availability of alternate platings

0
49.9 -0.2

0.95 MAX.

9Z21XX
z

TYP.
a
b

2X6=12.0
2 5

1 6

1 0

2.0
c

1
d
e
f CONTACT LAYOUT
(CONNECTOR MATING SIDE SHOWN)
25 15 11 1
2.0 TYP. 25 15 11 1

2X10=20.0 2X10=20.0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 a
2X24=48.0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 b
2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 2 2 2 2 2 2 2 c
2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 d
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 e
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f

2x6-12.0±0.1
2.0±0.1 TYP.

CONTACT
154- f 0.6±0.5

AREA
25 15 11 1

CONTACT
CONTACT
z

AREA
a

AREA

+0.2
P.C.B.

0
+0.2
b

11.3
+0.2
13.45

0
3.0

9.8
c

8.3
d
e
f

(3.5)

(3.5)

(3.5)
2.0±.1 TYP. 4.5
2X10=20.0±0.1
0.1

15.4
±
f 2.0

2x12=24.0±0.1 1 2 3
2x14=28.0±0.1
CONTACT DETAIL
2x24=48.0±0.1

Series 8071 Type B Vertical Male Feed-To

17 8071 154 000 833 = P2/P5 110 signal contacts and 44 ground contacts, Short Tail Std L2,3 cPCI
17 8071 154 503 833 = P2/P5 110 signal contacts and 44 ground contacts, Short Tail Std L1,3 cPCI
Contact Elco for availability of alternate platings

43.9 CONTACT LAYOUT

(CONNECTOR SIDE SHOWN)
2.0 Typ.

0.95 Max.
000
22 1
z
a
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
2X6=12.0

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 a
b 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 b
X X

c 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 c
1

d 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 d
e 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 e
f 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
22 1
2.0 Typ.
42.0
503
22 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 a
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 b
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 c
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 d
9Z21XX
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
2 x 6 = 12.0 ±0.1
2.0 ±0.1 TYP

154-ø0.6 ±0.05
CONTACT
CONTACT

22 1
AREA
CONTACT

+0.2
AREA

0
P.C.B.

AREA

11.3
9.8 +0.2
8.3 -0+0.2

Z
0

a
b
13.45
3.0

c
(3.5)

(3.5)

(3.5)

d
e

f 1 2 3
15.4

2.0 ±0.1 TYP.

42.0 ±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE SHOWN)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #168. Visit our website http://www.avxcorp.com

168 ELCO
2mm Hard Metric Connectors
Series 8071 Type A Vertical Male Feed-To (Hot Swap)
17 8071 154 508 833 = P1 110 signal contacts and 44 ground contacts, Short Tail, Hot Swap
Contact Elco for availability of alternate platings
0
49.9 -0.2

0.95 MAX.

z 9Z21XX

TYP.

2X6=12.0
b
2 5

1 6

1 0

2.0
c

1
d
e
CONTACT LAYOUT
f (CONNECTOR MATING SIDE SHOWN)
25 15 11 1
2.0 TYP. 25 15 11 1
2X10=20.0 2X10=20.0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 a
2X24=48.0 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 b
2 2 2 3 2 3 2 2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 c
2 2 3 2 3 2 3 2 3 2 3 1 2 3 2 3 2 2 2 3 2 2 d
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 e
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f

CONTACT
2X6-12.0±0.1
2.0±0.1 TYP.
154- f0.6±0.05

AREA

CONTACT
CONTACT
25 15 11 1

AREA
z

AREA

+0.2
P.C.B.

0
a

+0.2
13.45

8.3 +0.2

9.8 0

11.3
3.0

0
b
c
d
e

4.5

(3.5)

(3.5)

(3.5)
f
2.0±0.1 TYP. 15.4
.1
Å}0

2X10=20.0±0.1
2X12=24.0±0.1 1 2 3
f 2.0

2X14=28.0±0.1
CONTACT DETAIL
2X24=48.0±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Series 8071 Type B Vertical Male Feed-To

17 8071 133 000 833 = P3 95 signal contacts and 38 ground contacts, Short Tail, L2,3 cPCI
17 8071 133 503 833 = P3 95 signal contacts and 38 ground contacts, Short Tail, L1,3 cPCI
Contact Elco for availability of alternate platings

CONTACT LAYOUT
37.9 (CONNECTOR MATING SIDE SHOWN)
0.95 Max. 19 1
13.45

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
3.0

z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 a
a 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 b
2.0 Typ.

2X6=12.0

000 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 c
b
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 d
X X

c
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 e
1

d 15.4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
e
f
19 1 19 1
2.0 Typ.
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
36.0
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 a
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 b
503 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 c
2 x 6 = 12.0 ±0.1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 d
2.0 ±0.1 TYP

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e
133-f0.6±0.05 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
1

Z
CONTACT

a
CONTACT

AREA

b
CONTACT

+0.2
AREA

c
AREA

11.3
9.8 +0.2
8.3 -0+0.2

d
P.C.B.

f
(3.5)

(3.5)

(3.5)

2.0 ±0.1 TYP.

1 2 3

RECOMMENDED P.C. BOARD LAYOUT CONTACT DETAIL

(COMPONENT SIDE SHOWN)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #169. Visit our website http://www.avxcorp.com

ELCO 169
2mm Hard Metric Connectors
Series 8071 Type A Vertical Male Feed-To
17 8071 100 511 833 = P4 Type A 84 signal contacts and 16 ground contacts, Short Tail (Computer Telephony)
Contact Elco for availability of alternate platings
0
49.9 -0.2
0.95 MAX.

z 8N21XX
a
b

2X5=10.0
2 5

1 6

1 0
c

1
d
e
f CONTACTS LAYOUT

TYP.
25 15 11 1 (CONNECTOR MATING SIDE SHOWN)
2.0 TYP.
25 15 11 1

2.0
2X10=20.0 2X10=20.0
z
2X24=48.0 2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 2 2 2 a
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 b
2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 c
2 2 3 3 3 3 3 3 3 3 3 2 2 2 2 2 d
2 3 2 2 2 2 2 2 2 2 2 3 2 3 2 2 2 2 e
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
2X5=10.0±0.1

100-f0.6±0.05
2.0±0.1 TYP.

CONTACT
AREA
25 15 11 1

CONTACT
CONTACT
a

AREA

+0.2
AREA

0
b

P.C.B.

+0.2
0
+0.2
c

11.3
0

9.8
13.45
d

8.3
e 3.0

f
2.0±0.1 TYP.

(3.5)

(3.5)

(3.5)
4.5

2X7=14.0±0.1
.1
±0
f 2.0

2X10=20.0±0.1
15.4
2X12=24.0±0.1 1 2 3
2X14=28.0±0.1
2X24=48.0±0.1 CONTACT DETAIL

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Series 8071Type B Vertical Male Feed-To

17 8071 175 000 833 = 125 signal contacts and 50 ground contacts, Short Tail L2,3 cPCI
17 8071 175 503 833 = 125 signal contacts and 50 ground contacts, Short Tail L1,3 cPCI
Contact Elco for availability of alternate platings

49.9
0.95max. CONTACT LAYOUT
PITCH 2.0
2X4=8.0

(CONNECTOR SIDE SHOWN)

z
a
25
000 1
b
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
X X

c
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 a
1

d 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 b
e 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 c
f 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 d
25 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 e
1
PITCH 2.0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f
48.0

503
25 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 a
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 b
13.45

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 c
3.0

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 d
9Z21XX 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 e
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 f

15.4
2 X 6 = 12.0 ±0.1

CONTACT
2.0 ±0.1 Typ.

AREA

CONTACT
CONTACT

175-ø0.6 ±0.05
AREA
AREA
P.C.B.

+0.2

1
0
9.8 +0.2

25
0

11.3
8.3 +0.2

z
0

a
b
c
(3.5)

(3.5)

(3.5)

d
e
f

2.0 ±0.1 Typ.

1 2 3
48.0 ±0.1 CONTACT DETAIL

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #170. Visit our website http://www.avxcorp.com

170 ELCO
2mm Hard Metric Connectors
Series 8071 Type A Vertical Male Feed-Thru
17 8071 154 013 515 = P4 110 signal contacts and 44 ground contacts, Long Tail, L2,3 cPCI
17 8071 154 014 515 = P4 110 signal contacts and 44 ground contacts, Long Tail, L1,3 cPCI
Contact Elco for availability of alternate platings

49.9 0
-0.2 013
0.95 MAX.

z 013

13.45
25 15 11 1

3.0
TYP.
a
b T T T T T T T T T T T T T T T T T T T T T T z

2X6=12.0
2 5

1 6

1 0

2.0
c P P P P P P P P P P P P P P P P P P P P P P a

1
d P P P P P P P P P P P P P P P P P P P P P P b

4.5
e P P P P P P P P P P P P P P P P P P P P P P c
f P P P P P P P P P P P P P P P P P P P P P P d
P P P P P P P P P P P P P P P P P P P P P P e
25 15 11 2.0 TYP. 1
T T T T T T T T T T T T T T T T T T T T T T f
2X10=20.0 2X10=20.0
2X24=48.0

15.4

014 014
25 15 11 1
9Z21XX T T T T T T T T T T T T T T T T T T T T T T z

13.45
WWWWWWWWWWW WWWWWWWWWWW a

3.0
WWWWWWWWWWW WWWWWWWWWWW b
WWWWWWWWWWW WWWWWWWWWWW c
WWWWWWWWWWW WWWWWWWWWWW d
WWWWWWWWWWW WWWWWWWWWWW e

4.5
T T T T T T T T T T T T T T T T T T T T T T f

CONTACT

CONTACT
AREA

CONTACT

AREA
2X6=12.0±0.1
2.0±0.1 TYP.

+0.2
AREA

0
+0.2
0
154-f0.6±0.05 15.4

P.C.B.

11.3
+0.2

9.8
0
25 15 11 1

8.3
z
a
b
c
d

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

e

(16.0)
f

CONTACT

(14.5)
CONTACT

(16.0)
2.0±0.1 TYP.

AREA

CONTACT
2X10=20.0±0.1

AREA
.1
±0

AREA
2X12=24.0±0.1
f 2.0

2X14=28.0±0.1
2X24=48.0±0.1
W P T
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)

Series 8071 Type B Vertical Male Feed-Thru

17 8071 132 016 515 = P5 110 signal contacts and 22 ground contacts, Long Tail (Computer Telephony)
Contact Elco for availability of alternate platings

0
43.9 -0.2

0.95 MAX.
13.45
3.0

z 8N21XX
a
b
2X5=10.0
2 2

c
1

d
e
f
TYP.

22 2.0 TYP. 1
2.0

2X21=42.0

15.4
CONTACT LAYOUT
(CONNECTOR SIDE SHOWN)
22 1
z
P P P P MMMMMMMMMMMMMMMMMM a
2X5=10.0±0.1
2.0±0.1 TYP.

P P P P MMMMMMMMMMMMMMMMMM b
132-f0.6±0.05 P P P P MMMMMMMMMMMMMMMMMM c
22 1 P P P P MMMMMMMMMMMMMMMMMM d
P P P P MMMMMMMMMMMMMMMMMM e
T T T T T T T T T T T T T T T T T T T T T T f
a
b
CONTACT

c
AREA

CONTACT

d
CONTACT

e
AREA
AREA

+0.2
P.C.B.

f
0
+0.2
+0.2

11.3
0

9.8

2.0±0.1 TYP.
8.3

2X21=42.0±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)
PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

(13.0)

(14.5)
CONTACT

(16.0)
CONTACT

CONTACT
AREA

AREA

AREA

M P T

CONTACT DETAIL

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #171. Visit our website http://www.avxcorp.com

ELCO 171
2mm Hard Metric Connectors
Series 8071 Type B Vertical Male Feed-Thru
17 8071 133 003 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L2,3 cPCI
17 8071 133 004 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L1,3 cPCI
17 8071 133 015 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L1,3 cPCI
Contact Elco for availability of alternate platings

37.9
0.95 MAX.

z
8N21XX

TYP.
a
b

2X6=12.0
X X

2.0
c

1
d
e
f
19 2.0 TYP. 1

36.0

CONTACT
CONTACT

AREA
AREA
2.0±0.1 TYP.
2X6=12.0±0.1

CONTACT
CONTACT

AREA
133-f0.6±0.05

AREA

+0.2
P.C.B.

0
+0.2
19 1

0
+0.2

+0.2

11.3
0

9.8
z

8.3
8.3
a
b
c
d
e

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

f
(13.0)

(14.5)
CONTACT

(16.0)

(16.0)
2.0±0.1 TYP.

CONTACT
CONTACT

CONTACT
AREA

AREA
36.0±0.1
AREA

AREA
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)
M W P T
CONTACT DETAIL

Variation Code Side View Pin Loading

003 19 1
13.45
3.0

T T T T T T T T T T T T T T T T T T T z
Long Tail, Std. P P P P P P P P P P P P P P P P P P P a
P P P P P P P P P P P P P P P P P P P b
P P P P P P P P P P P P P P P P P P P c
L2, 3 P P P P P P P P P P P P P P P P P P P d
P P P P P P P P P P P P P P P P P P P e
P3 T T T T T T T T T T T T T T T T T T T f
15.4

004 19 1
13.45
3.0

T T T T T T T T T T T T T T T T T T T z
MMMMMMMMMMMMMMMMMMM a
Long Tail, Std. MMMMMMMMMMMMMMMMMMM b
MMMMMMMMMMMMMMMMMMM c
L1, 3 MMMMMMMMMMMMMMMMMMM d
MMMMMMMMMMMMMMMMMMM e
T T T T T T T T T T T T T T T T T T T f
P3 15.4

015 19 1
13.45

T T T T T T T T T T T T T T T T T T T z
3.0

Long Tail, Std. WWWWWWWWWWWWWWWWWWW a

WWWWWWWWWWWWWWWWWWW b
L1, 3 WWWWWWWWWWWWWWWWWWW c
WWWWWWWWWWWWWWWWWWW d
WWWWWWWWWWWWWWWWWWW e
P3 T T T T T T T T T T T T T T T T T T T f
15.4

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #172. Visit our website http://www.avxcorp.com

172 ELCO
2mm Hard Metric Connectors
Series 8071 Type B Vertical Male Feed-Thru
17 8071 154 003 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L2,3 cPCI
17 8071 154 004 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L1,3 cPCI
17 8071 154 015 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L1,3 cPCI
Contact Elco for availability of alternate platings

43.9
0.95 MAX.

z
8N21XX

TYP.
a
b

2X6=12.0
X X

2.0
c

1
d
e
f
22 2.0 TYP. 1

42.0

CONTACT
CONTACT

AREA
AREA
2.0±0.1 TYP.
2X6=12.0±0.1

CONTACT
CONTACT

AREA
154-f0.6±0.05

AREA

+0.2
P.C.B.

0
+0.2
22 1

0
+0.2

+0.2

11.3
0

9.8
z

8.3
8.3
a
b
c
d
e

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

f

(13.0)

(14.5)
CONTACT

(16.0)

(16.0)
2.0±0.1 TYP.

CONTACT
CONTACT

CONTACT
42.0 ±0.1 AREA

AREA
AREA

AREA
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)
M W P T
CONTACT DETAIL

Variation Code Side View Pin Loading

003 22 1
13.45
3.0

T T T T T T T T T T T T T T T T T T T T T T z
Long Tail, Std. P P P P P P P P P P P P P P P P P P P P P P a
P P P P P P P P P P P P P P P P P P P P P P b
P P P P P P P P P P P P P P P P P P P P P P c
L2, 3 P P P P P P P P P P P P P P P P P P P P P P d
P P P P P P P P P P P P P P P P P P P P P P e
P2/P5 T T T T T T T T T T T T T T T T T T T T T T f
15.4

004 22 1
13.45
3.0

T T T T T T T T T T T T T T T T T T T T T T z
MMMMMMMMMMMMMMMMMMMMMM a
Long Tail, Std. MMMMMMMMMMMMMMMMMMMMMM b
MMMMMMMMMMMMMMMMMMMMMM c
L1, 3 MMMMMMMMMMMMMMMMMMMMMM d
MMMMMMMMMMMMMMMMMMMMMM e
T T T T T T T T T T T T T T T T T T T T T T f
P2/P5 15.4

015
22 1
13.45
3.0

Long Tail, Std. T T T T T T T T T T T T T T T T T T T T T T z

WWWWWWWWWWWWWWWWWWWWWW a
WWWWWWWWWWWWWWWWWWWWWW b
L1, 3 WWWWWWWWWWWWWWWWWWWWWW c
WWWWWWWWWWWWWWWWWWWWWW d
P2/P5 WWWWWWWWWWWWWWWWWWWWWW e
T T T T T T T T T T T T T T T T T T T T T T f
15.4

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #173. Visit our website http://www.avxcorp.com

ELCO 173
2mm Hard Metric Connectors
Series 8071 Type B Vertical Male Feed-Thru
17 8071 175 003 515 = 125 signal contacts and 50 ground contacts, Long Tail L2,3 cPCI
17 8071 175 015 515 = 125 signal contacts and 50 ground contacts, Long Tail L1,3 cPCI
Contact Elco for availability of alternate platings
CONTACT LAYOUT
(CONNECTOR SIDE SHOWN)

49.9 003 25 003 1

0.95 MAX. T T T T T T T T T T T T T T T T T T T T T T T T z
P P P P P P P P P P P P P P P P P P P P P P P P a
P P P P P P P P P P P P P P P P P P P P P P P P b

13.45
z P P P P P P P P P P P P P P P P P P P P P P P P c

3.0
P P P P P P P P P P P P P P P P P P P P P P P P d
a P P P P P P P P P P P P P P P P P P P P P P P P e

2.0 TYP.
2X6=12.0
b T T T T T T T T T T T T T T T T T T T T T T T T f
X X

1
d
e
f
25 1
2.0 TYP.
48.0

15.4

015 25 015 1
T T T T T T T T T T T T T T T T T T T T T T T T z
WWWWWWWWWWW WWWWWWWWWWWWW a
WWWWWWWWWWW WWWWWWWWWWWWW b

13.45
WWWWWWWWWWW WWWWWWWWWWWWW c

3.0
WWWWWWWWWWW WWWWWWWWWWWWW d
9Z21XX WWWWWWWWWWW WWWWWWWWWWWWW e
T T T T T T T T T T T T T T T T T T T T T T T T f

CONTACT
AREA

CONTACT
CONTACT

AREA
2 x 6 = 12.0 ±0.1

AREA
P.C.B.

+0.2
2.0 ±0.1 Typ.

0
15.4

+0.2

11.3
0
+0.2
0

9.8
8.3
175-ø0.6 ±0.05
25 1
z
a

PRESS FIT AREA

PRESS FIT AREA

PRESS FIT AREA

b
c

(14.5)
d

(16.0)

(16.0)
CONTACT
CONTACT
e

CONTACT
AREA
AREA
f

AREA
2.0 ±0.1 Typ.
2X (N/7-1) = A ±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE) W P T

Series 8071 Type C Vertical Male Feed-To

17 8071 077 509 833 = 55 signal contacts and 22 ground contacts, Short Tail, L1,3
17 8071 077 512 833 = 55 signal contacts and 22 ground contacts, Short Tail, L2,3
Contact Elco for availability of alternate platings

CONTACT LAYOUT CONTACT LAYOUT

(CONNECTOR MATING SIDE SHOWN) (CONNECTOR MATING SIDE SHOWN)
11 1 11 1
0 3 3 3 3 3 3 3 3 3 3 3 z 3 3 3 3 3 3 3 3 3 3 3 z
24.95 -0.2
1 1 1 1 1 1 1 1 1 1 1 a 2 2 2 2 2 2 2 2 2 2 2 a
1 1 1 1 1 1 1 1 1 1 1 b 2 2 2 2 2 2 2 2 2 2 2 b
0.95 MAX.
509 1 1 1 1 1 1 1 1 1 1 1 c 512 2 2 2 2 2 2 2 2 2 2 2 c
1 1 1 1 1 1 1 1 1 1 1 d 2 2 2 2 2 2 2 2 2 2 2 d
13.45
3.0

1 1 1 1 1 1 1 1 1 1 1 e 2 2 2 2 2 2 2 2 2 2 2 e
3 3 3 3 3 3 3 3 3 3 3 f 3 3 3 3 3 3 3 3 3 3 3 f
z
a
TYP.

CONTACT
ELCO 8071

b
2X6=12.0
77P

2.0±0.1 TYP.
2X6=12.0±0.1
4.5
1 0

AREA
2.0

c
1

CONTACT

d 77-f0.6±0.05
CONTACT

AREA

e 11 1
+0.2

15.4
AREA

0
P.C.B.

f
+0.2
0

z
+0.2

11.3
0

11 2.0 TYP. 1
a
9.8
8.3

2X10=20.0 b
c
d
e
(3.5)

(3.5)

(3.5)

f
0.
0±

2.0±0.1 TYP.
f 2.

1 2 3
9Z21XX 2X10=20.0±0.1
CONTACT DETAIL 2X10+3=23.0±0.1

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #174. Visit our website http://www.avxcorp.com

174 ELCO
2mm Hard Metric Connectors
Series 8074 Type L Vertical Male Feed-To
61 8074 006 001 007 = Type L 6 position power connector with polarizing key, (housing only)
Power Contact: P/N 71 8074 000 501 ordered separately

0
49.9 -0.2

2.0
2 4

2 0

1 6

1 0

2
15.4 POWER
CONTACT
7.5 7.5 6.25 6.25 7.5 7.5
3.7 Max.
7.5 10.0 10.0 7.5

Ø2.0 +0.05
-0
0.1 4
7.5 7.5 6.25 6.25 7.5 7.5
0.1

5.5
4.5
Ø2.0 E
HOL
±0

+0.2 +0.2
6 - Ø5.9
-0 -0 13.45
.1

HOLE
7.5 10.0 10.0 7.5 3.0
71 8074 000 501 863 80 8074 000 001 062
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)

Series 8075 Type M Vertical Male Feed-To

17 8075 355 501 833 = Type M 3 position power connector with polarizing key, with 55 signal contacts
Contact Elco for availability of alternate platings

0
49.9 -0.2
0.95 Max.
z
a 2.0 9Z21XX
1 0

b
2 6

1 6

c 15.4
d
e
f
25 15 11 1
2.0 TYP.
2 x 10 = 20.0 4.0 6.25 7.5 7.5
CONTACT LAYOUT
2.0 TYP. (CONNECTOR MATING SIDE SHOWN)
2 x 4 = 8.0
25 15 10 6 2
z
1 1 1 1 1 1 1 1 1 1 1
55 - Ø0.6 ±0.05 HOLE
a
b 1 1 1 1 1 1 1 1 1 1 1
c 1 1 1 1 1 1 1 1 1 1 1
5 - Ø2.0 +0.05 0.1 d 1 1 1 1 1 1 1 1 1 1 1
-0 6.25 7.5 7.5 e 1 1 1 1 1 1 1 1 1 1 1
0.1 f
25 15
a
b
c 5.5
d
CONTACT
e 4.5 AREA
Ø2.0 E
HOL

2.0 TYP.
0.1 2 x 10 = 20.0
±0

3 - Ø5.9 +0.2
-0 P.C.B. 8.3 +0.2
.1

HOLE -0

24.0 10.0 7.5

2.0 TYP. (3.5)
2 x 4 = 8.0 13.45
3.0 1
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #175. Visit our website http://www.avxcorp.com

ELCO 175
2mm Hard Metric Connectors
Series 8483/8485 Style M DIN EuroCard Power Connector
59 8483 024 000 025 = Male, Right Angle, 7 Power and 24 Signal Contacts
59 8485 024 000 015 = Female, Vertical, 7 Power and 24 Signal Contacts
3.0 +0.2 0.6 x 0.6
-0.4 4.5 Max.

2.54 88.9
2.54 10.2 -0.2
5.08 94 Max.
a

a
11.1 Max.
b

b
31

28

25

22

20
19

14
13

11

2
c

c
2.54
3 x 7.62 7 x 2.54
= 22.86 = 17.78 7.62
29 x 2.54 = 73.66

95.0 Max.
8.5
-0.1 85.0 -0.2

11.6 Max. 12.6

Max.
4.90 Max.
5.3 ±0.3
2.54 Ø5.8 Max.
5.08 0.6 x 0.6

90 ±0.1
7 x 2.54
= 17.78
2.54 0.3
10.6
-0.2
3 x 7.62 7.62
= 22.86
29 x 2.54 = 73.66

Series 8071 Coding Keys: Type A Male Type A Female

Male
101 003 102 006 103 008 104 002 Color Ral Code
Key Part Number Plug/Receptacle
Cadmium Yellow Brilliant Blue Pastel Orange Strawberry Red Number No.
Cadmium Yellow 1021 3456 81 8071 000 101003 Plug 3.3V C-PCI
Brilliant Blue 5007 1567 81 8071 000 102006 Plug 5.0V C-PCI
Pastel Orange 2003 3568 81 8071 000 103008 Plug
Female Strawberry Red 3018 1248 81 8071 000 104002 Plug
101 003 102 006 103 008 104 002 Cadmium Yellow 1021 1278 82 8071 000 101003 Receptacle 3.3V C-PCI
Cadmium Yellow Brilliant Blue Pastel Orange Strawberry Red Brilliant Blue 5007 2348 82 8071 000 102006 Receptacle 5.0V C-PCI
Pastel Orange 2003 1247 82 8071 000 103008 Receptacle
Strawberry Red 3018 3567 82 8071 000 104002 Receptacle

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #176. Visit our website http://www.avxcorp.com

176 ELCO
2mm Hard Metric Connectors
Series 8072 Type A Right Angle Male
17 8072 110 001 833 = Type A Right Angle Male
Contact Elco for availability of alternate platings

0
49.9 -0.2

TYP.

2X4=8.0
2.0
1 11 15 25

e
d

15.4
c
b 8N21XX
a

2.0 TYP.

2X10=20.0 2X10=20.0
2X24=48.0 0.95 MAX.

5.3 (5.15)
2x4=8.0±0.1

110-f0.6±0.05
2.0±0.1 TYP.

HOLES

e
d

7.4
c
b
a

3.0
2.0±0.1 TYP.
MAX.

2X10=20.0±0.1
1.5

2X14=28.0±0.1
2.0 TYP.

2X24=48.0±0.1
1.8 2X4=8.0

RECOMMENDED P.C. BOARD LAYOUT

(COMPONENT SIDE)

Series 8072 Type B Right Angle Male

17 8072 095 000 833 = Type B Right Angle Male, 5x19 Positions
17 8072 110 000 833 = Type B Right Angle Male, 5x22 Positions
17 8072 125 000 833 = Type B Right Angle Male, 5x25 Positions
Contact Elco for availability of alternate platings

0
B -0.2
TYP.

2X4=8.0
2.0

1 N/5
P/N A B
e
d 17 8072 095 000 000 833 36.0 37.9
15.4

c
b
17 8072 110 000 000 833 42.0 43.9
a 17 8072 125 000 000 833 48.0 49.9

2.0 TYP.

2X(N/5-1)=A 0.95 MAX.

5.3 (5.15)
2.0±0.1 TYP.
2X4=8.0±0.1

N-f0.6±0.05
HOLES

e
d
7.4

c
b
a
3.0
MAX.

2.0±0.1 TYP.
1.5

2X (N/5-1) = A±0.1
2.0 TYP.

1.8 2X4=8.0
RECOMMENDED P.C. BOARD LAYOUT
(COMPONENT SIDE)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #177. Visit our website http://www.avxcorp.com

ELCO 177
2mm Hard Metric Connectors
Series 8071 RP4 Shroud, Type A & C
61 8071 154 301 007 = RP4 Type A 154 cavities (22 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm
61 8071 154 311 007 = RP4 Type A 154 cavities (22 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm
61 8071 154 321 007 = RP4 Type A 154 cavities (22 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm
61 8071 077 301 007 = Type C 77 cavities (11 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm
61 8071 077 311 007 = Type C 77 cavities (11 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm
61 8071 077 321 007 = Type C 77 cavities (11 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm

TYPE A TYPE C
+0
49.9 +0
-0.2
24.95 -0.2

0.95max. 0.95 max.

ELCO 8071

2x6=12.0
2x6=12.0

77P

1 0
2 5

1 6

1 0

1
1
25 15 11 1

PITCH 2.0
11 1

PITCH 2.0
PITCH 2.0 PITCH 2.0
2x10=20.0
2x10=20.0 2x10=20.0

H
L

15.4

Series 8071 RP2, 3, 5 Shroud, Type B

61 8071 133 300 007 = RP3 Type B 133 cavities (19 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm
61 8071 133 310 007 = RP3 Type B 133 cavities (19 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm
61 8071 133 320 007 = RP3 Type B 133 cavities (19 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm
61 8071 154 300 007 = RP2, 5 Type B 154 cavities (22 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm
61 8071 154 310 007 = RP2, 5 Type B 154 cavities (22 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm
61 8071 154 320 007 = RP2, 5 Type B 154 cavities (22 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm
61 8071 175 300 007 = Type B 175 cavities (25 position) L = 3.0, H = 13.45 , PCB Thickness: 4.8mm
61 8071 175 310 007 = Type B 175 cavities (25 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm
61 8071 175 320 007 = Type B 175 cavities (25 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm

B +0
-0.2

0.95 MAX.
H
L
2X6=12.0
X X

N/7 1 15.4
PITCH 2.0

PITCH 2.0
2X(N/7-1)=A

P/N A B # OF POSITIONS
61 8071 133 XXX 007 36.0 37.9 19
61 8071 154 XXX 007 42.0 43.9 22
61 8071 175 XXX 007 48.0 49.9 25

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #178. Visit our website http://www.avxcorp.com

178 ELCO
2mm Hard Metric Connectors
Series 2525 Power Pack Connectors
37 2525 0213 01 050 = M 4 thread, with flat tabs, with hardware
37 2525 0213 02 050 = M 4 thread, without tabs, with hardware
37 2525 0213 03 050 = M 4 thread, with 45 degree tabs
67 2525 0213 01 489 = M 4 thread, with flat tabs, without hardware
67 2525 0213 02 489 = M 4 thread, without tabs, without hardware
67 2525 0213 03 489 = M 4 thread, with 45 degree tabs

Series 8073 5 Position Modular Input/Output Cable

97 8073 002 050 870 = 5 position cable assembly, double ended, 500mm long
97 8073 002 100 870 = 5 position cable assembly, double ended, 1000mm long
97 8073 002 150 870 = 5 position cable assembly, double ended, 1500mm long
97 8073 002 200 870 = 5 position cable assembly, double ended, 2000mm long
97 8073 002 250 870 = 5 position cable assembly, double ended, 2500mm long
Contact Elco for availability of alternate lengths

Wiring Pattern
A SIDE B SIDE
z Row Gnd z Row
a Row Signal 1 a Row
b Row Signal 2 b Row
c Row Gnd c Row
d Row Signal 3 d Row
e Row Signal 4 e Row
f Row Gnd f Row
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #179. Visit our website http://www.avxcorp.com

ELCO 179
2mm Hard Metric Connectors
Application and Installation Tooling

MALE CONNECTORS POSITIONS LENGTH PART #

Type A male 22 49.9mm 66 3015 344 000 000
Type B male 19 37.9mm 66 3015 347 000 000
Type B male 22 43.9mm 66 3015 346 000 000
Type B male 25 49.9mm 66 3015 345 000 000
Type C male 11 22.3mm 66 3015 348 000 000

FEMALE CONNECTORS (With Upper Shield)

Type A female 22 49.9mm
Type B female 19 37.9mm
Type B female 22 43.9mm
Type B female 25 49.9mm
Type C female 11

BASE BLOCK All 66 3015 349 000 000

PRESS FIT MACHINE Daughter 36 1004 028 000 000

HAND PRESS 36 1004 030 000 000

PLUG PRESS Backplane 36 1004 029 000 000

RECEPTACLE REPAIR JIG 06 1002 063 000 000

INSTALLATION TOOL FOR CODING KEYS 06 1002 066 000 000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #180. Visit our website http://www.avxcorp.com

180 ELCO
PCI Mezzanine Card Connector System
Series 5015 - CMC and PMC Stacking - 1.0mm Pitch - 64 Pin

Technical Specifications
Voltage Rating 250V
Current Rating 1.0A
Insulation Resistance 1G Ohm min.
Operating Temperature -55°C to 85°C
Insulation Material LCP GF UL94V-0
Phosphor bronze,
Contact Material Gold mating area,
Tin lead tail
Mating Cycles 100 cycle
Mating Force 4.0Kg Max
Unmating Force 1.5Kg Max

Ordering Code
Height Plug Receptacle
8mm 14 5015 064 X00 863 24 5015 064 X00 863
9mm 14 5015 064 X01 863 24 5015 064 X00 863
10mm 14 5015 064 X02 863 24 5015 064 X00 863
11mm 14 5015 064 X01 863 24 5015 064 X02 863
12mm 14 5015 064 X02 863 24 5015 064 X02 863
13mm 14 5015 064 X02 863 24 5015 064 X03 863
14mm 14 5015 064 X01 863 24 5015 064 X05 863
15mm 14 5015 064 X02 863 24 5015 064 X05 863
8mm, 10mm, 13mm, and 15mm parts are available. Consult the factory for other stack heights.
X: 0-Without Boss 1-With Boss

Plugs Receptacles
Top View Top View

Side View Side View

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #181. Visit our website http://www.avxcorp.com

ELCO 181
182
Termination Style
Maximum number
of contact positions Notes

No. of rows
Current

Style
Male / Female
Elco - Series
Pitch (mm)
Dip Solder
Press-fit
Hand Solder
Wire Wrap
Crimp
IDC
Screwed
Coax
High Power
Straight
Right Angled
B M 8457 2.54 X X X X 32 (1/2 B), 64 (B) 2 1.5
B F 8457 2.54 X X X X 32 (1/2 B), 64 (B) 2 1.5
B M 8458 2.54 X X 32 (1/2 B), 64 (B) 2 1.5
B F 8458 2.54 X X X 32 (1/2 B), 64 (B) 2 1.5
C M 8457 2.54 X X X X 30 (1/3 C), 48 (1/2 C), 96 (C), 128, 160 (Expanded C) 3, 4, 5 1.5
C F 8457 2.54 X X X X 30 (1/3 C), 48 (1/2 C), 96 (C), 128, 160 (Expanded C) 3, 4, 5 1.5
C M 8458 2.54 X X 30 (1/3 C), 48 (1/2 C), 96 (C), 128, 160 (Expanded C) 3, 4, 5 1.5
C F 8458 2.54 X X X 30 (1/3 C), 48 (1/2 C), 96 (C), 128, 160 (Expanded C) 3, 4, 5 1.5
Q M 8477 2.54 X X X X 32 (1/2 Q), 64 (Q) 2 1.5
Q F 8477 2.54 X X X X 32 (1/2 Q), 64 (Q) 2 1.5
Q M 8478 2.54 X X X 32 (1/2 Q), 64 (Q) 2 1.5
Q F 8478 2.54 X X 32 (1/2 Q), 64 (Q) 2 1.5
R M 8477 2.54 X X X X 30 (1/3 R), 48 (1/2 R), 96 (R), 150, 128, 160 (Expanded R) 3, 4, 5 1.5
R F 8477 2.54 X X X X 48 (1/2 R), 96 (R), 128, 160 (Expanded R) 3, 4, 5 1.5
R M 8478 2.54 X X X 48 (1/2 R), 96 (R), 128, 160 (Expanded R) 3, 4, 5 1.5
R F 8478 2.54 X X 48 (1/2 R), 96 (R) 3, 4, 5 1.5
C M 8557 2.54 X X 48 (1/2 C), 96 (C) 3 1.5 High temperature material (250 - 15 seconds) for IR reflow solder
C F 8557 2.54 X X 48 (1/2 C), 96 (C) 3 1.5 High temperature material (250 - 15 seconds) for IR reflow solder
R M 8577 2.54 X X 48 (1/2 C), 96 (R) 3 1.5 High temperature material (250 - 15 seconds) for IR reflow solder
R F 8577 2.54 X X 48 (1/2 R), 96 (R), 128 (Expanded R) 3, 4 1.5 High temperature material (250 - 15 seconds) for IR reflow solder
C F 8459 2.54 X X 48 (1/2 C), 96 (C) 3 3.0 High temperature material (250 - 15 seconds) for IR reflow solder
C F 8464 2.54 X X 96 3 1.5 3 row insulator, 2 rows loaded, 2 x 16 / 2 x 32 AWG 26 / 28
C F 8254 2.54 X X 96 3 1.5 cable size AWG 24 - 28
R M 8442 2.54 X 96 (R), 128 (Expanded R) 3, 4 - Only row A and C can be loaded with contacts
D M 8447 5.08 X X X 32 2 5.5
E M 8447 5.08 X X X 48 3 5.5
D F 8447 5.08 X X X X 32 2 5.5 Pressfit for internal backpanel assembly available
E F 8447 5.08 X X X X 48 3 5.5 Pressfit for internal backpanel assembly available
F F 8487 5.08 X X X 48 3 5.5

ELCO
G M 8487 5.08 X X X 64 4 5.5
F F 8487 5.08 X X X X 48 3 5.5 Pressfit for internal backpanel assembly available
G F 8487 5.08 X X X X 64 4 5.5
M M 8483 2.54 X X X X X X 6, 24, 42, 60, 78 (Signal Contacts) 3 1.5 No of cavities for special contacts 10, 8, 6, 4, 2
M M 8483 2.54 X X X X X X X 6, 24, 42, 60, 78 (Signal Contacts) 3 1.5 No of cavities for special contacts 10, 8, 6, 4, 2
M F 8484 2.54 X X X X X X 6, 24, 42, 60, 78 (Signal Contacts) 3 1.5 No of cavities for special contacts 10, 8, 6, 4, 2
M F 8488 2.54 X X X X X X 6, 24, 42, 60, 78 (Signal Contacts) 3 1.5
Elco Quick Reference Guide DIN 41612

M M 8483 2.54 X X X X X X 12, 30 3 1.5 No of cavities for special contacts 4, 2

M M 8484 2.54 X X X X X X 12, 30 (1/2 M) 3 1.5 No of cavities for special contacts 4, 2
M F 8484 2.54 X X X X X X 12, 30 (1/2 M) 3 1.5 No of cavities for special contacts 4, 2
M M/F 8489 N/A X X X X X X X X N/A N/A 40 Special contacts Style M, see catalog
M M/F 8485 N/A X X N/A N/A 40 High power press-fit contact Style M
H M 8450 7.62 X X X X 11 1 20
H F 8450 7.62 X X 11 1 20
H M 8456 5.08 X X X X 15 2 15
H F 8456 5.08 X X X X X 15 2 15
H M 8453 5.08 X X X X X 15 2 15 Inverted press-fit H15 header
H F 8454 5.08 X X 15 2 15
H F 8449 5.08 X X X X X 10+2 2 15 (40) Style H 10 + 2 receptacle with 2 special contacts
H M 8449 5.08 X X X X 10+2 2 15 (40) Style H 10 + 2 receptacle with 2 special contacts
F 9075 2.54 X X X X 78+6 3, 2 1.5 (5) Hybrid connector 78 signal and 6 high power contacts
M 9075 2.54 X X X 78+6 3, 2 1.5 (5) Hybrid connector 78 signal and 6 high power contacts
R - 8521 - - 3 - Ejector latch
- - 8254 - - - - Cover assembly for IDC and Crimp connector
- - 8404 - - - - Cover assembly for IDC and Crimp connector

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #182. Visit our website http://www.avxcorp.com
DIN 41612 Connectors
Series 8457 – Male Style 1⁄2 B - 2 Rows (2 x 16) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
032 2 (2 x 16) 15 1.500 1.754 1.900 2.100
(38.10) (44.55) (48.26) (53.34)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
32 a + b fully loaded 10 8457 032 001 001 10 8457 032 001 025 10 8457 032 001 049
3.4 mm (Y) 16 a + b even loading 10 8457 032 001 007 10 8457 032 001 031 10 8457 032 001 055
Straight 16 a loading only 10 8457 032 001 003 10 8457 032 001 027 10 8457 032 001 051
32 a + b fully loaded 10 8457 032 002 001 10 8457 032 002 025 10 8457 032 002 049
16 a + b even loading 10 8457 032 002 007 10 8457 032 002 031 10 8457 032 002 055
3.0 mm (Y) 16 a loading only 10 8457 032 002 003 10 8457 032 002 027 10 8457 032 002 051
Right Angled 30 + 2 fully loaded + ground 10 8457 032 102 001 10 8457 032 102 025 10 8457 032 102 049
32 a + b fully loaded 10 8457 032 003 001 10 8457 032 003 025 10 8457 032 003 049
13.0 mm (Y) 16 a + b even loading 10 8457 032 003 007 10 8457 032 003 031 10 8457 032 003 055
Straight 16 a loading only 10 8457 032 003 003 10 8457 032 003 027 10 8457 032 003 051
32 a + b fully loaded 10 8457 032 004 001 10 8457 032 004 025 10 8457 032 004 049
11.3 mm (Y) 16 a + b even loading 10 8457 032 004 007 10 8457 032 004 031 10 8457 032 004 055
Right Angled 16 a loading only 10 8457 032 004 003 10 8457 032 004 027 10 8457 032 004 051
32 a + b fully loaded 10 8457 032 006 001 10 8457 032 006 025 10 8457 032 006 049
7.7 mm (Y) 16 a + b even loading 10 8457 032 006 007 10 8457 032 006 031 10 8457 032 006 055
Solder Hole 16 a loading only 10 8457 032 006 003 10 8457 032 006 027 10 8457 032 006 051
32 a + b fully loaded 10 8457 032 007 001 10 8457 032 007 025 10 8457 032 007 049
6.4 mm (Y) 16 a + b even loading 10 8457 032 007 007 10 8457 032 007 031 10 8457 032 007 055
Solder Loop 16 a loading only 10 8457 032 007 003 10 8457 032 007 027 10 8457 032 007 051
32 a + b fully loaded 10 8457 032 008 001 10 8457 032 008 025 10 8457 032 008 049
16 a + b even loading 10 8457 032 008 007 10 8457 032 008 031 10 8457 032 008 055
2.3 mm (Y) 16 a loading only 10 8457 032 008 003 10 8457 032 008 027 10 8457 032 008 051
Right Angled 30 + 2 fully loaded + ground 10 8457 032 108 001 10 8457 032 108 025 10 8457 032 108 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #183. Visit our website http://www.avxcorp.com

ELCO 183
DIN 41612 Connectors
Series 8457 – Female Style 1⁄2 B - 2 Rows (2 x 16) - .100 Pitch

Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
032 2 (2 x 16) 15 1.500 1.744 1.968 2.162
(38.10) (44.30) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
32 a + b fully loaded 20 8457 032 001 001 20 8457 032 001 025 20 8457 032 001 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 001 007 20 8457 032 001 031 20 8457 032 001 055
4.5 mm (Y) Straight 16 a loading only 20 8457 032 001 003 20 8457 032 001 027 20 8457 032 001 051
32 a + b fully loaded 20 8457 032 002 001 20 8457 032 002 025 20 8457 032 002 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 002 007 20 8457 032 002 031 20 8457 032 002 055
2.9 mm (Y) Straight 16 a loading only 20 8457 032 002 003 20 8457 032 002 027 20 8457 032 002 051
32 a + b fully loaded 20 8457 032 003 001 20 8457 032 003 025 20 8457 032 003 049
0.3 x 0.79 mm post profile 16 a + b even loading 20 8457 032 003 007 20 8457 032 003 031 20 8457 032 003 055
4.5 mm (Y) Straight 16 a loading only 20 8457 032 003 003 20 8457 032 003 027 20 8457 032 003 051
32 a + b fully loaded 20 8457 032 004 001 20 8457 032 004 025 20 8457 032 004 049
0.3 x 0.79 mm post profile 16 a + b even loading 20 8457 032 004 007 20 8457 032 004 031 20 8457 032 004 055
2.9 mm (Y) Straight 16 a loading only 20 8457 032 004 003 20 8457 032 004 027 20 8457 032 004 051
32 a + b fully loaded 20 8457 032 005 001 20 8457 032 005 025 20 8457 032 005 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 005 007 20 8457 032 005 031 20 8457 032 005 055
13.0 mm (Y) Straight 16 a loading only 20 8457 032 005 003 20 8457 032 005 027 20 8457 032 005 051
32 a + b fully loaded 20 8457 032 010 001 20 8457 032 010 025 20 8457 032 010 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 010 007 20 8457 032 010 031 20 8457 032 010 055
7.0 mm (Y) Straight 16 a loading only 20 8457 032 010 003 20 8457 032 010 027 20 8457 032 010 051
32 a + b even loading 20 8457 032 011 001 20 8457 032 011 025 20 8457 032 011 049
0.6 x 0.6 mm post profile 16 a + b fully loaded 20 8457 032 011 007 20 8457 032 011 031 20 8457 032 011 055
3.5 mm (Y) Straight 16 a loading only 20 8457 032 011 003 20 8457 032 011 027 20 8457 032 011 051
32 a + b fully loaded 20 8457 032 012 001 20 8457 032 012 025 20 8457 032 012 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 012 007 20 8457 032 012 031 20 8457 032 012 055
19.4 mm (Y) Straight 16 a loading only 20 8457 032 012 003 20 8457 032 012 027 20 8457 032 012 051
32 a + b fully loaded 20 8457 032 013 001 20 8457 032 013 025 20 8457 032 013 049
0.6 x 0.6 mm post profile 16 a + b even loading 20 8457 032 013 007 20 8457 032 013 031 20 8457 032 013 055
4.5 mm (Y) Right Angled 16 a loading only 20 8457 032 013 003 20 8457 032 013 027 20 8457 032 013 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #184. Visit our website http://www.avxcorp.com

184 ELCO
DIN 41612 Connectors
Series 8457 – Male Style B - 2 Rows (2 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.354 3.500 3.700
(78.74) (85.19) (88.90) (93.98)

Contact Design Part Number

and Number of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
64 a + b fully loaded 10 8457 064 001 001 10 8457 064 001 025 10 8457 064 001 049
3.4 mm (Y) 32 a + b even loading 10 8457 064 001 007 10 8457 064 001 031 10 8457 064 001 055
Straight 32 a loading only 10 8457 064 001 003 10 8457 064 001 027 10 8457 064 001 051
64 a + b fully loaded 10 8457 064 002 001 10 8457 064 002 025 10 8457 064 002 049
32 a + b even loading 10 8457 064 002 007 10 8457 064 002 031 10 8457 064 002 055
3.0 mm (Y) 32 a loading only 10 8457 064 002 003 10 8457 064 002 027 10 8457 064 002 051
Right Angled 62 + 2 fully loaded + ground 10 8457 064 102 001 10 8457 064 102 025 10 8457 064 102 049
64 a + b fully loaded 10 8457 064 003 001 10 8457 064 003 025 10 8457 064 003 049
13.0 mm (Y) 32 a + b even loading 10 8457 064 003 007 10 8457 064 003 031 10 8457 064 003 055
Straight 32 a loading only 10 8457 064 003 003 10 8457 064 003 027 10 8457 064 003 051
64 a + b fully loaded 10 8457 064 004 001 10 8457 064 004 025 10 8457 064 004 049
11.3 mm (Y) 32 a + b even loading 10 8457 064 004 007 10 8457 064 004 031 10 8457 064 004 055
Right Angled 32 a loading only 10 8457 064 004 003 10 8457 064 004 027 10 8457 064 004 051
64 a + b fully loaded 10 8457 064 006 001 10 8457 064 006 025 10 8457 064 006 049
7.7 mm (Y) 32 a + b even loading 10 8457 064 006 007 10 8457 064 006 031 10 8457 064 006 055
Solder Hole 32 a loading only 10 8457 064 006 003 10 8457 064 006 027 10 8457 064 006 051
64 a + b fully loaded 10 8457 064 007 001 10 8457 064 007 025 10 8457 064 007 049
6.4 mm (Y) 32 a + b even loading 10 8457 064 007 007 10 8457 064 007 031 10 8457 064 007 055
Solder Loop 32 a loading only 10 8457 064 007 003 10 8457 064 007 027 10 8457 064 007 051
64 a + b fully loaded 10 8457 064 008 001 10 8457 064 008 025 10 8457 064 008 049
32 a + b even loading 10 8457 064 008 007 10 8457 064 008 031 10 8457 064 008 055
2.3 mm (Y) 32 a loading only 10 8457 064 008 003 10 8457 064 008 027 10 8457 064 008 051
Right Angled 62 + 2 fully loaded + ground 10 8457 064 108 001 10 8457 064 108 025 10 8457 064 108 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #185. Visit our website http://www.avxcorp.com

ELCO 185
DIN 41612 Connectors
Series 8457 – Female Style B - 2 Rows (2 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.343 3.543 3.736
(78.74) (84.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
64 a + b fully loaded 20 8457 064 001 001 20 8457 064 001 025 20 8457 064 001 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 001 007 20 8457 064 001 031 20 8457 064 001 055
4.5 mm (Y) Straight 32 a loading only 20 8457 064 001 003 20 8457 064 001 027 20 8457 064 001 051
64 a + b fully loaded 20 8457 064 002 001 20 8457 064 002 025 20 8457 064 002 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 002 007 20 8457 064 002 031 20 8457 064 002 055
2.9 mm (Y) Straight 32 a loading only 20 8457 064 002 003 20 8457 064 002 027 20 8457 064 002 051
64 a + b fully loaded 20 8457 064 003 001 20 8457 064 003 025 20 8457 064 003 049
0.3 x 0.79 mm Post Profile 32 a + b even loading 20 8457 064 003 007 20 8457 064 003 031 20 8457 064 003 055
4.5 mm (Y) Straight 32 a loading only 20 8457 064 003 003 20 8457 064 003 027 20 8457 064 003 051
64 a + b fully loaded 20 8457 064 004 001 20 8457 064 004 025 20 8457 064 004 049
0.3 x 0.79 mm Post Profile 32 a + b even loading 20 8457 064 004 007 20 8457 064 004 031 20 8457 064 004 055
2.9 mm (Y) Straight 32 a loading only 20 8457 064 004 003 20 8457 064 004 027 20 8457 064 004 051
64 a + b fully loaded 20 8457 064 005 001 20 8457 064 005 025 20 8457 064 005 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 005 007 20 8457 064 005 031 20 8457 064 005 055
13.0 mm (Y) Straight 32 a loading only 20 8457 064 005 003 20 8457 064 005 027 20 8457 064 005 051
64 a + b fully loaded 20 8457 064 010 001 20 8457 064 010 025 20 8457 064 010 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 010 007 20 8457 064 010 031 20 8457 064 010 055
7.0 mm (Y) Straight 32 a loading only 20 8457 064 010 003 20 8457 064 010 027 20 8457 064 010 051
64 a + b fully loaded 20 8457 064 011 001 20 8457 064 011 025 20 8457 064 011 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 011 007 20 8457 064 011 031 20 8457 064 011 055
3.5 mm (Y) Straight 32 a loading only 20 8457 064 011 003 20 8457 064 011 027 20 8457 064 011 051
64 a + b fully loaded 20 8457 064 012 001 20 8457 064 012 025 20 8457 064 012 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 012 007 20 8457 064 012 031 20 8457 064 012 055
19.4 mm (Y) Straight 32 a loading only 20 8457 064 012 003 20 8457 064 012 027 20 8457 064 012 051
64 a + b fully loaded 20 8457 064 013 001 20 8457 064 013 025 20 8457 064 013 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8457 064 013 007 20 8457 064 013 031 20 8457 064 013 055
4.5 mm (Y) Right Angled 32 a loading only 20 8457 064 013 003 20 8457 064 013 027 20 8457 064 013 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #186. Visit our website http://www.avxcorp.com

186 ELCO
DIN 41612 Connectors
Series 8457 – Male Style 1⁄3 C - 3 Rows (3 x 10) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
03 3 (3 x 10) 9 0.900 1.158 1.300 1.497
(22.86) (29.41) (33.02) (38.02)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
30 a + b + c fully loaded 10 8457 030 001 001 10 8457 030 001 025 10 8457 030 001 049
3.4 mm (Y) 20 a + c fully loaded 10 8457 030 001 002 10 8457 030 001 026 10 8457 030 001 050
Straight 28 + 2 fully loaded + ground 10 8457 030 101 001 10 8457 030 101 025 10 8457 030 101 049
30 a + b + c fully loaded 10 8457 030 002 001 10 8457 030 002 025 10 8457 030 002 049
3.0 mm (Y) 20 a + c fully loaded 10 8457 030 002 002 10 8457 030 002 026 10 8457 030 002 050
Right Angled 28 + 2 fully loaded + ground 10 8457 030 102 001 10 8457 030 102 025 10 8457 030 102 049

13.0 mm (Y) 30 a + b + c fully loaded 10 8457 030 003 001 10 8457 030 003 025 10 8457 030 003 049
Straight 20 a + c fully loaded 10 8457 030 003 002 10 8457 030 003 026 10 8457 030 003 050

11.3 mm (Y) 30 a + b + c fully loaded 10 8457 030 004 001 10 8457 030 004 025 10 8457 030 004 049
Right Angled 20 a + c fully loaded 10 8457 030 004 002 10 8457 030 004 026 10 8457 030 004 050

7.7 mm (Y) 30 a + b + c fully loaded 10 8457 030 006 001 10 8457 030 006 025 10 8457 030 006 049
Solder Hole 20 a + c fully loaded 10 8457 030 006 002 10 8457 030 006 026 10 8457 030 006 050

6.4 mm (Y) 30 a + b + c fully loaded 10 8457 030 007 001 10 8457 030 007 025 10 8457 030 007 049
Solder Loop 20 a + c fully loaded 10 8457 030 007 002 10 8457 030 007 026 10 8457 030 007 050
30 a + b + c fully loaded 10 8457 030 008 001 10 8457 030 008 025 10 8457 030 008 049
2.3 mm (Y) 20 a + c fully loaded 10 8457 030 008 002 10 8457 030 008 026 10 8457 030 008 050
Right Angled 28 + 2 fully loaded + ground 10 8457 030 108 001 10 8457 030 108 025 10 8457 030 108 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #187. Visit our website http://www.avxcorp.com

ELCO 187
DIN 41612 Connectors
Series 8457 – Female Style 1⁄3 C - 3 Rows (3 x 10) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
030 3 (3 x 10) 9 0.900 1.163 1.563 1.144
(22.86) (34.75) (39.70) (29.06)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 001 001 20 8457 030 001 025 20 8457 030 001 049
4.5 mm (Y) Straight 20 a + c fully loaded 20 8457 030 001 002 20 8457 030 001 026 20 8457 030 001 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 002 001 20 8457 030 002 025 20 8457 030 002 049
2.9 mm (Y) Straight 20 a + c fully loaded 20 8457 030 002 002 20 8457 030 002 026 20 8457 030 002 050

0.3 x 0.79 mm Post Profile 30 a + b + c fully loaded 20 8457 030 003 001 20 8457 030 003 025 20 8457 030 003 049
4.5 mm (Y) Straight 20 a + c fully loaded 20 8457 030 003 002 20 8457 030 003 026 20 8457 030 003 050

0.3 x 0.79 mm Post Profile 30 a + b + c fully loaded 20 8457 030 004 001 20 8457 030 004 025 20 8457 030 004 049
2.9 mm (Y) Straight 20 a + c fully loaded 20 8457 030 004 002 20 8457 030 004 026 20 8457 030 004 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 005 001 20 8457 030 005 025 20 8457 030 005 049
13.0 mm (Y) Straight 20 a + c fully loaded 20 8457 030 005 002 20 8457 030 005 026 20 8457 030 005 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 010 001 20 8457 030 010 025 20 8457 030 010 049
7.0 mm (Y) Straight 20 a + c fully loaded 20 8457 030 010 002 20 8457 030 010 026 20 8457 030 010 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 011 001 20 8457 030 011 025 20 8457 030 011 049
3.5 mm (Y) Straight 20 a + c fully loaded 20 8457 030 011 002 20 8457 030 011 026 20 8457 030 011 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 012 001 20 8457 030 012 025 20 8457 030 012 049
19.4 mm (Y) Straight 20 a + c fully loaded 20 8457 030 012 002 20 8457 030 012 026 20 8457 030 012 050

0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8457 030 013 001 20 8457 030 013 025 20 8457 030 013 049
4.5 mm (Y) Right Angled 20 a + c fully loaded 20 8457 030 013 002 20 8457 030 013 026 20 8457 030 013 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #188. Visit our website http://www.avxcorp.com

188 ELCO
DIN 41612 Connectors
Series 8457 – Male Style 1⁄2 C - 3 Rows (3 x 16) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 15 1.500 1.760 1.900 2.122
(38.10) (44.70) (48.26) (53.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 10 8457 048 001 001 10 8457 048 001 025 10 8457 048 001 049
32 a + c fully loaded 10 8457 048 001 002 10 8457 048 001 026 10 8457 048 001 050
3.4 mm (Y) 16 a loading only 10 8457 048 001 003 10 8457 048 001 027 10 8457 048 001 051
Straight 46 + 2 fully loaded + ground 10 8457 048 101 001 10 8457 048 101 025 10 8457 048 101 049
48 a + b + c fully loaded 10 8457 048 002 001 10 8457 048 002 025 10 8457 048 002 049
32 a + c fully loaded 10 8457 048 002 002 10 8457 048 002 026 10 8457 048 002 050
3.0 mm (Y) 16 a loading only 10 8457 048 002 003 10 8457 048 002 027 10 8457 048 002 051
Right Angled 46 + 2 fully loaded + ground 10 8457 048 102 001 10 8457 048 102 025 10 8457 048 102 049
48 a + b + c fully loaded 10 8457 048 003 001 10 8457 048 003 025 10 8457 048 003 049
13.0 mm (Y) 32 a + c fully loaded 10 8457 048 003 002 10 8457 048 003 026 10 8457 048 003 050
Straight 16 a loading only 10 8457 048 003 003 10 8457 048 003 027 10 8457 048 003 051
48 a + b + c fully loaded 10 8457 048 004 001 10 8457 048 004 025 10 8457 048 004 049
11.3 mm (Y) 32 a + c fully loaded 10 8457 048 004 002 10 8457 048 004 026 10 8457 048 004 050
Right Angled 16 a loading only 10 8457 048 004 003 10 8457 048 004 027 10 8457 048 004 051
48 a + b + c fully loaded 10 8457 048 006 001 10 8457 048 006 025 10 8457 048 006 049
7.7 mm (Y) 32 a + c fully loaded 10 8457 048 006 002 10 8457 048 006 026 10 8457 048 006 050
Solder Hole 16 a loading only 10 8457 048 006 003 10 8457 048 006 027 10 8457 048 006 051
48 a + b + c fully loaded 10 8457 048 007 001 10 8457 048 007 025 10 8457 048 007 049
6.4 mm (Y) 32 a + c fully loaded 10 8457 048 007 002 10 8457 048 007 026 10 8457 048 007 050
Solder Loop 16 a loading only 10 8457 048 007 003 10 8457 048 007 027 10 8457 048 007 051
48 a + b + c fully loaded 10 8457 048 008 001 10 8457 048 008 025 10 8457 048 008 049
32 a + c fully loaded 10 8457 048 008 002 10 8457 048 008 026 10 8457 048 008 050
2.3 mm (Y) 16 a loading only 10 8457 048 008 003 10 8457 048 008 027 10 8457 048 008 051
Right Angled 46 + 2 fully loaded + ground 10 8457 048 108 001 10 8457 048 108 025 10 8457 048 108 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #189. Visit our website http://www.avxcorp.com

ELCO 189
DIN 41612 Connectors
Series 8457 – Female Style 1⁄2 C - 3 Rows (3 x 16) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 15 1.500 1.969 2.161 1.744
(38.10) (50.01) (54.89) (44.30)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 20 8457 048 001 001 20 8457 048 001 025 20 8457 048 001 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 001 002 20 8457 048 001 026 20 8457 048 001 050
4.5 mm (Y) Straight 16 a loading only 20 8457 048 001 003 20 8457 048 001 027 20 8457 048 001 051
48 a + b + c fully loaded 20 8457 048 002 001 20 8457 048 002 025 20 8457 048 002 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 002 002 20 8457 048 002 026 20 8457 048 002 050
2.9 mm (Y) Straight 16 a loading only 20 8457 048 002 003 20 8457 048 002 027 20 8457 048 002 051
48 a + b + c fully loaded 20 8457 048 003 001 20 8457 048 003 025 20 8457 048 003 049
0.3 x 0.79 mm Post Profile 32 a + c fully loaded 20 8457 048 003 002 20 8457 048 003 026 20 8457 048 003 050
4.5 mm (Y) Straight 16 a loading only 20 8457 048 003 003 20 8457 048 003 027 20 8457 048 003 051
48 a + b + c fully loaded 20 8457 048 004 001 20 8457 048 004 025 20 8457 048 004 049
0.3 x 0.79 mm Post Profile 32 a + c fully loaded 20 8457 048 004 002 20 8457 048 004 026 20 8457 048 004 050
2.9 mm (Y) Straight 16 a loading only 20 8457 048 004 003 20 8457 048 004 027 20 8457 048 004 051
48 a + b + c fully loaded 20 8457 048 005 001 20 8457 048 005 025 20 8457 048 005 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 005 002 20 8457 048 005 026 20 8457 048 005 050
13.0 mm (Y) Straight 16 a loading only 20 8457 048 005 003 20 8457 048 005 027 20 8457 048 005 051
48 a + b + c fully loaded 20 8457 048 010 001 20 8457 048 010 025 20 8457 048 010 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 010 002 20 8457 048 010 026 20 8457 048 010 050
7.0 mm (Y) Straight 16 a loading only 20 8457 048 010 003 20 8457 048 010 027 20 8457 048 010 051
48 a + b + c fully loaded 20 8457 048 011 001 20 8457 048 011 025 20 8457 048 011 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 011 002 20 8457 048 011 026 20 8457 048 011 050
3.5 mm (Y) Straight 16 a loading only 20 8457 048 011 003 20 8457 048 011 027 20 8457 048 011 051
48 a + b + c fully loaded 20 8457 048 012 001 20 8457 048 012 025 20 8457 048 012 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 012 002 20 8457 048 012 026 20 8457 048 012 050
19.4 mm (Y) Straight 16 a loading only 20 8457 048 012 003 20 8457 048 012 027 20 8457 048 012 051
48 a + b + c fully loaded 20 8457 048 013 001 20 8457 048 013 025 20 8457 048 013 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8457 048 013 002 20 8457 048 013 026 20 8457 048 013 050
4.5 mm (Y) Right Angled 16 a loading only 20 8457 048 013 003 20 8457 048 013 027 20 8457 048 013 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #190. Visit our website http://www.avxcorp.com

190 ELCO
DIN 41612 Connectors
Series 8457 – Male Style C - 3 Rows (3 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.358 3.500 3.697
(78.74) (85.29) (88.90) (93.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 10 8457 096 001 001 10 8457 096 001 025 10 8457 096 001 049
64 a + c fully loaded 10 8457 096 001 002 10 8457 096 001 026 10 8457 096 001 050
32 a + c even loading 10 8457 096 001 009 10 8457 096 001 033 10 8457 096 001 057
3.4 mm (Y) 32 a loading only 10 8457 096 001 003 10 8457 096 001 027 10 8457 096 001 051
Straight 94 + 2 fully loaded + ground 10 8457 096 101 001 10 8457 096 101 025 10 8457 096 101 049
96 a + b + c fully loaded 10 8457 096 002 001 10 8457 096 002 025 10 8457 096 002 049
64 a + c fully loaded 10 8457 096 002 002 10 8457 096 002 026 10 8457 096 002 050
32 a + c even loading 10 8457 096 002 009 10 8457 096 002 033 10 8457 096 002 057
3.0 mm (Y) 32 a loading only 10 8457 096 002 003 10 8457 096 002 027 10 8457 096 002 051
Right Angled 94 + 2 fully loaded + ground 10 8457 096 102 001 10 8457 096 102 025 10 8457 096 102 049
96 a + b + c fully loaded 10 8457 096 003 001 10 8457 096 003 025 10 8457 096 003 049
64 a + c fully loaded 10 8457 096 003 002 10 8457 096 003 026 10 8457 096 003 050
13.0 mm (Y) 32 a + c even loading 10 8457 096 003 009 10 8457 096 003 033 10 8457 096 003 057
Straight 32 a loading only 10 8457 096 003 003 10 8457 096 003 027 10 8457 096 003 051
96 a + b + c fully loaded 10 8457 096 004 001 10 8457 096 004 025 10 8457 096 004 049
64 a + c fully loaded 10 8457 096 004 002 10 8457 096 004 026 10 8457 096 004 050
11.3mm (Y) 32 a + c even loading 10 8457 096 004 009 10 8457 096 004 033 10 8457 096 004 057
Right Angled 32 a loading only 10 8457 096 004 003 10 8457 096 004 027 10 8457 096 004 051
96 a + b + c fully loaded 10 8457 096 006 001 10 8457 096 006 025 10 8457 096 006 049
64 a + c fully loaded 10 8457 096 006 002 10 8457 096 006 026 10 8457 096 006 050
7.7 mm (Y) 32 a + c even loading 10 8457 096 006 009 10 8457 096 006 033 10 8457 096 006 057
Solder Hole 32 a loading only 10 8457 096 006 003 10 8457 096 006 027 10 8457 096 006 051
96 a + b + c fully loaded 10 8457 096 007 001 10 8457 096 007 025 10 8457 096 007 049
64 a + c fully loaded 10 8457 096 007 002 10 8457 096 007 026 10 8457 096 007 050
6.4 mm (Y) 32 a + c even loading 10 8457 096 007 009 10 8457 096 007 033 10 8457 096 007 057
Solder Loop 32 a loading only 10 8457 096 007 003 10 8457 096 007 027 10 8457 096 007 051
96 a + b + c fully loaded 10 8457 096 008 001 10 8457 096 008 025 10 8457 096 008 049
64 a + c fully loaded 10 8457 096 008 002 10 8457 096 008 026 10 8457 096 008 050
32 a + c even loading 10 8457 096 008 009 10 8457 096 008 033 10 8457 096 008 057
2.3 mm (Y) 32 a loading only 10 8457 096 008 003 10 8457 096 008 027 10 8457 096 008 051
Right Angled 94 + 2 fully loaded + ground 10 8457 096 108 001 10 8457 096 108 025 10 8457 096 108 04

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #191. Visit our website http://www.avxcorp.com

ELCO 191
DIN 41612 Connectors
Series 8457 – Female Style C - 3 Rows (3 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.543 3.736 3.343
(78.74) (89.99) (94.89) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 20 8457 096 001 001 20 8457 096 001 025 20 8457 096 001 049
64 a + c fully loaded 20 8457 096 001 002 20 8457 096 001 026 20 8457 096 001 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 001 009 20 8457 096 001 033 20 8457 096 001 057
4.5 mm (Y) Straight 32 a loading only 20 8457 096 001 003 20 8457 096 001 027 20 8457 096 001 051
96 a + b + c fully loaded 20 8457 096 002 001 20 8457 096 002 025 20 8457 096 002 049
64 a + c fully loaded 20 8457 096 002 002 20 8457 096 002 026 20 8457 096 002 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 002 009 20 8457 096 002 033 20 8457 096 002 057
2.9 mm (Y) Straight 32 a loading only 20 8457 096 002 003 20 8457 096 002 027 20 8457 096 002 051
96 a + b + c fully loaded 20 8457 096 003 001 20 8457 096 003 025 20 8457 096 003 049
64 a + c fully loaded 20 8457 096 003 002 20 8457 096 003 026 20 8457 096 003 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8457 096 003 009 20 8457 096 003 033 20 8457 096 003 057
4.5 mm (Y) Straight 32 a loading only 20 8457 096 003 003 20 8457 096 003 027 20 8457 096 003 051
96 a + b + c fully loaded 20 8457 096 004 001 20 8457 096 004 025 20 8457 096 004 049
64 a + c fully loaded 20 8457 096 004 002 20 8457 096 004 026 20 8457 096 004 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8457 096 004 009 20 8457 096 004 033 20 8457 096 004 057
2.9 mm (Y) Straight 32 a loading only 20 8457 096 004 003 20 8457 096 004 027 20 8457 096 004 051
96 a + b + c fully loaded 20 8457 096 005 001 20 8457 096 005 025 20 8457 096 005 049
64 a + c fully loaded 20 8457 096 005 002 20 8457 096 005 026 20 8457 096 005 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 005 009 20 8457 096 005 033 20 8457 096 005 057
13.0 mm (Y) Straight 32 a loading only 20 8457 096 005 003 20 8457 096 005 027 20 8457 096 005 051
96 a + b + c fully loaded 20 8457 096 010 001 20 8457 096 010 025 20 8457 096 010 049
64 a + c fully loaded 20 8457 096 010 002 20 8457 096 010 026 20 8457 096 010 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 010 009 20 8457 096 010 033 20 8457 096 010 057
7.0 mm (Y) Straight 32 a loading only 20 8457 096 010 003 20 8457 096 010 027 20 8457 096 010 051
96 a + b + c fully loaded 20 8457 096 011 001 20 8457 096 011 025 20 8457 096 011 049
64 a + c fully loaded 20 8457 096 011 002 20 8457 096 011 026 20 8457 096 011 050
0.6 x 0.6 mm Post Profile 32 a + c all even loading 20 8457 096 011 009 20 8457 096 011 033 20 8457 096 011 057
3.5 mm (Y) Straight 32 a loading only 20 8457 096 011 003 20 8457 096 011 027 20 8457 096 011 051
96 a + b + c fully loaded 20 8457 096 012 001 20 8457 096 012 025 20 8457 096 012 049
64 a + c fully loaded 20 8457 096 012 002 20 8457 096 012 026 20 8457 096 012 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 012 009 20 8457 096 012 033 20 8457 096 012 057
19.4 mm (Y) Straight 32 a loading only 20 8457 096 012 003 20 8457 096 012 027 20 8457 096 012 051
96 a + b + c fully loaded 20 8457 096 013 001 20 8457 096 013 025 20 8457 096 013 049
64 a + c fully loaded 20 8457 096 013 002 20 8457 096 013 026 20 8457 096 013 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8457 096 013 009 20 8457 096 013 033 20 8457 096 013 057
4.5 mm (Y) Right Angled 32 a loading only 20 8457 096 013 003 20 8457 096 013 027 20 8457 096 013 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #192. Visit our website http://www.avxcorp.com

192 ELCO
DIN 41612 Connectors
Series 8457 – Male Style C Expanded - 4 Rows (4 x 32) -
.100 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

3.4 mm (Y) 128 a + b + c + d fully loaded 10 8457 128 001 001 10 8457 128 001 025 10 8457 096 001 049
Straight 126 + 2 4 rows fully loaded + ground 10 8457 128 101 001 10 8457 128 101 025 10 8457 096 101 049

3.0 mm (Y) 128 a + b + c + d fully loaded 10 8457 128 002 001 10 8457 128 002 025 10 8457 096 002 049
Right Angled 126 + 2 4 rows fully loaded + ground 10 8457 128 102 001 10 8457 128 102 025 10 8457 096 102 049

Series 8457 – Male Style C Expanded - 5 Rows (5 x 32) -

.100 Pitch

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

3.4 mm (Y) 160 a + b + c + d + e fully loaded 10 8457 160 001 001 10 8457 160 001 025 10 8457 096 001 049
Straight 158 + 2 5 rows fully loaded + ground 10 8457 160 101 001 10 8457 160 101 025 10 8457 096 101 049

3.0 mm (Y) 160 a + b + c + d + e fully loaded 10 8457 160 002 001 10 8457 160 002 025 10 8457 096 002 049
Right Angled 158 + 2 5 rows fully loaded + ground 10 8457 160 102 001 10 8457 160 102 025 10 8457 096 102 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #193. Visit our website http://www.avxcorp.com

ELCO 193
DIN 41612 Connectors
Series 8447 – Male Style D - 2 Rows (2 x 16) -
.100 or .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

3.0 mm (Y) (0.6 x 0.6 mm) 32 a + c fully loaded 10 8447 032 001 001 10 8447 032 001 025 10 8447 032 001 049
Right Angled Pitch 5.08 30 + 2 fully loaded + ground 10 8447 032 101 001 10 8447 032 101 025 10 8447 032 101 049

3.0 mm (Y) (0.6 x 0.6 mm) 32 a + c fully loaded 10 8447 032 002 001 10 8447 032 002 025 10 8447 032 002 049
Right Angled Pitch 2.54 30 + 2 fully loaded + ground 10 8447 032 102 001 10 8447 032 102 025 10 8447 032 102 049

Series 8447 – Female Style D - 2 Rows (2 x 16) - .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

1 x 1 mm Post Profile
20.0 mm (Y) Straight 32 a + c fully loaded 20 8447 032 001 001 20 8447 032 001 025 20 8447 032 001 049

1 x 1 mm Post Profile
9.0 mm (Y) Straight 32 a + c fully loaded 20 8447 032 002 001 20 8447 032 002 025 20 8447 032 002 049

0.6 x 0.6 mm Post Profile

4.0 mm (Y) Straight 32 a + c fully loaded 20 8447 032 003 001 20 8447 032 003 025 20 8447 032 003 049

1 x 1 mm Post Profile
12.0 mm (Y) Straight 32 a + c fully loaded 20 8447 032 004 001 20 8447 032 004 025 20 8447 032 004 049

0.6 x 1.28 mm Post Profile

4.5 mm (Y) Straight 32 a + c fully loaded 20 8447 032 006 001 20 8447 032 006 025 20 8447 032 006 049

7.5 mm (Y) Solder Hole 32 a + c fully loaded 20 8447 032 007 001 20 8447 032 007 025 20 8447 032 007 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #194. Visit our website http://www.avxcorp.com

194 ELCO
DIN 41612 Connectors
Series 8447 – Male Style E - 3 Rows (3 x 16) - .200 Pitch
Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

3.0 mm (Y) (0.6 x 0.6 mm) 48 a + c + e fully loaded 10 8447 048 001 001 10 8447 048 001 025 10 8447 048 001 049
Right Angled Pitch 5.08 46 + 2 fully loaded + ground 10 8447 048 101 001 10 8447 048 101 025 10 8447 048 101 049

3.0 mm (Y) (0.6 x 0.6 mm) 48 a + c + e fully loaded 10 8447 048 002 001 10 8447 048 002 025 10 8447 048 002 049
Right Angled Pitch 2.54 46 + 2 fully loaded + ground 10 8447 048 102 001 10 8447 048 102 025 10 8447 048 102 049

Series 8447 – Female Style E - 3 Rows (3 x 16) - .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

1 x 1 mm Post Profile
20.0 mm (Y) Straight 48 a + c + e fully loaded 20 8447 048 001 001 20 8447 048 001 025 20 8447 048 001 049

1 x 1 mm Post Profile
9.0 mm (Y) Straight 48 a + c + e fully loaded 20 8447 048 002 001 20 8447 048 002 025 20 8447 048 002 049

0.6 x 0.6 mm Post Profile

4.0 mm (Y) Straight 48 a + c + e fully loaded 20 8447 048 003 001 20 8447 048 003 025 20 8447 048 003 049

1 x 1 mm Post Profile
12.0 mm (Y) Straight 48 a + c + e fully loaded 20 8447 048 004 001 20 8447 048 004 025 20 8447 048 004 049

0.6 x 0.6 mm Post Profile

4.5 mm (Y) Straight 48 a + c + e fully loaded 20 8447 048 006 001 20 8447 048 006 025 20 8447 048 006 049

7.5 mm (Y) Solder Hole 48 a + c + e fully loaded 20 8447 048 007 001 20 8447 048 007 025 20 8447 048 007 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #195. Visit our website http://www.avxcorp.com

ELCO 195
DIN 41612 Connectors
Series 8487 – Male Style F -
3 Rows (3 x 16) - .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
32 d + z fully loaded 10 8487 048 001 002 10 8487 048 001 026 10 8487 048 001 050
32 b + z fully loaded 10 8487 048 001 005 10 8487 048 001 029 10 8487 048 001 053
32 d + z fully, Ground in z2 59 8487 048 000 049 59 8487 048 000 055 59 8487 048 000 061
32 d + z fully, Ground in z2 + z32 59 8487 048 000 050 59 8487 048 000 056 59 8487 048 000 062
32 b + z fully, Ground in z2 59 8487 048 000 051 59 8487 048 000 057 59 8487 048 000 063
32 b + z fully, Ground in z2 + z32 59 8487 048 000 052 59 8487 048 000 058 59 8487 048 000 063
48 d + b + z fully loaded 10 8487 048 001 001 10 8487 048 001 025 10 8487 048 001 049
48 fully loaded + Ground in z2 59 8487 048 000 047 59 8487 048 000 053 59 8487 048 000 059
48 fully, Ground in z2 + z32 59 8487 048 000 048 59 8487 048 000 054 59 8487 048 000 060
3.0 mm (Y) 48 fully loaded + Ground in b2 + b32 59 8487 048 000 067 59 8487 048 000 066 59 8487 048 000 065
Right Angled Pitch 5.08 48 fully loaded + Ground in d2 + d32 59 8487 048 000 070 59 8487 048 000 069 59 8487 048 000 068

Series 8487 – Female Style F -

3 Rows (3 x 16) - .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 d + b + z fully loaded 20 8487 048 001 001 20 8487 048 001 025 20 8487 048 001 049
0.6 x 0.6 mm Post Profile 32 d + z fully loaded 20 8487 048 001 002 20 8487 048 001 026 20 8487 048 001 050
4.5 mm (X) Straight 32 b + z fully loaded 20 8487 048 001 005 20 8487 048 001 029 20 8487 048 001 053
48 d + b + z fully loaded 20 8487 048 002 001 20 8487 048 002 025 20 8487 048 002 049
1 x 1 mm Post Profile 32 d + z fully loaded 20 8487 048 002 002 20 8487 048 002 026 20 8487 048 002 050
22.0 mm (X) Straight 32 b + z fully loaded 20 8487 048 002 005 20 8487 048 002 029 20 8487 048 002 053
48 d + b + z fully loaded 20 8487 048 003 001 20 8487 048 003 025 20 8487 048 003 049
Soldereyelet 32 d + z fully loaded 20 8487 048 003 002 20 8487 048 003 026 20 8487 048 003 050
9.0 mm (X) Straight 32 b + z fully loaded 20 8487 048 003 005 20 8487 048 003 029 20 8487 048 003 053
48 d + b + z fully loaded 20 8487 048 004 001 20 8487 048 004 025 20 8487 048 004 049
1 x 1 mm Post Profile 32 d + z fully loaded 20 8487 048 004 002 20 8487 048 004 026 20 8487 048 004 050
4.0 mm (X) Straight 32 b + z fully loaded 20 8487 048 004 005 20 8487 048 004 029 20 8487 048 004 053
48 d + b + z fully loaded 20 8487 048 005 001 20 8487 048 005 025 20 8487 048 005 049
0.4 x 0.6 mm Post Profile 32 d + z fully loaded 20 8487 048 005 002 20 8487 048 005 026 20 8487 048 005 050
3.2 mm (X) Straight 32 b + z fully loaded 20 8487 048 005 005 20 8487 048 005 029 20 8487 048 005 053

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #196. Visit our website http://www.avxcorp.com

196 ELCO
DIN 41612 Connectors
Series 8487 – Male Style G - 4 Rows (4 x 16) - .200 Pitch
Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

3.0 mm (Y)
Right Angled 64 f + d + b + z fully loaded 10 8487 064 001 001 10 8487 064 001 025 10 8487 064 001 049

Series 8487 – Female Style G - 4 Rows (4 x 16) - .200 Pitch

Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

1 x 1 mm Post Profile
4.5 mm (X) Straight 64 f + d + b + z fully loaded 20 8487 064 001 001 20 8487 064 001 025 20 8487 064 001 049

1 x 1 mm Post Profile
22.0 mm (X) Straight 64 f + d + b + z fully loaded 20 8487 064 002 001 20 8487 064 002 025 20 8487 064 002 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #197. Visit our website http://www.avxcorp.com

ELCO 197
DIN 41612 Connectors
Series 8483 – Male Style 1⁄2 M - 3 Rows (3 x 4 or 10) -
.100 Pitch

Dimensions

Contact Design No. of Cavities No. of Cavities Part Number

and for Single for Special Loading Performance classes according to DIN 41612
Termination Length Positions Positions Description III II I

3.0 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 001 001 10 8483 012 001 025 10 8483 012 001 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 001 001 10 8483 030 001 025 10 8483 030 001 049

11.4 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 002 001 10 8483 012 002 025 10 8483 012 002 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 002 001 10 8483 030 002 025 10 8483 030 002 049

3.0 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 003 001 10 8483 012 003 025 10 8483 012 003 049
Right Angled 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 003 001 10 8483 030 003 025 10 8483 030 003 049

11.3mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 004 001 10 8483 012 004 025 10 8483 012 004 049
Right Angled 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 004 001 10 8483 030 004 025 10 8483 030 004 049
Solder eyelet
rows a + c 4.8 mm 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 005 001 10 8483 012 005 025 10 8483 012 005 049
row b 7.5 mm 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 005 001 10 8483 030 005 025 10 8483 030 005 049
Solder hole
rows a + c 6.1 mm 12 (3 x 4) 4 a + b + c fully loaded 10 8483 012 006 001 10 8483 012 006 025 10 8483 012 006 049
row b 8.8 mm 30 (3 x 10) 2 a + b + c fully loaded 10 8483 030 006 001 10 8483 030 006 025 10 8483 030 006 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #198. Visit our website http://www.avxcorp.com

198 ELCO
DIN 41612 Connectors
Series 8483 – Male Style M - Fully Loaded - 3 Rows
(3 x 2, 8, 14, 20 or 28) - .100 Pitch
Dimensions

Contact Design No. of Cavities No. of Cavities Part Number

and for Single for Special Loading Performance classes according to DIN 41612
Termination Length Positions Positions Description III II I
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 001 001 10 8483 006 001 025 10 8483 006 001 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 001 001 10 8483 024 001 025 10 8483 024 001 049
42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 001 001 10 8483 042 001 025 10 8483 042 001 049
3.0 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 001 001 10 8483 060 001 025 10 8483 060 001 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 001 001 10 8483 078 001 025 10 8483 078 001 049
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 002 001 10 8483 006 002 025 10 8483 006 002 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 002 001 10 8483 024 002 025 10 8483 024 002 049
42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 002 001 10 8483 042 002 025 10 8483 042 002 049
11.4 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 002 001 10 8483 060 002 025 10 8483 060 002 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 002 001 10 8483 078 002 025 10 8483 078 002 049
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 003 001 10 8483 006 003 025 10 8483 006 003 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 003 001 10 8483 024 003 025 10 8483 024 003 049
42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 003 001 10 8483 042 003 025 10 8483 042 003 049
3.0 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 003 001 10 8483 060 003 025 10 8483 060 003 049
Right Angled 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 003 001 10 8483 078 003 025 10 8483 078 003 049
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 004 001 10 8483 006 004 025 10 8483 006 004 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 004 001 10 8483 024 004 025 10 8483 024 004 049
42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 004 001 10 8483 042 004 025 10 8483 042 004 049
11.3mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 004 001 10 8483 060 004 025 10 8483 060 004 049
Right Angled 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 004 001 10 8483 078 004 025 10 8483 078 004 049
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 005 001 10 8483 006 005 025 10 8483 006 005 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 005 001 10 8483 024 005 025 10 8483 024 005 049
Solder eyelet 42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 005 001 10 8483 042 005 025 10 8483 042 005 049
rows a + c 4.8 mm 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 005 001 10 8483 060 005 025 10 8483 060 005 049
row b 7.5 mm 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 005 001 10 8483 078 005 025 10 8483 078 005 049
6 (3 x 2) 10 a + b + c fully loaded 10 8483 006 006 001 10 8483 006 006 025 10 8483 006 006 049
24 (3 x 8) 8 a + b + c fully loaded 10 8483 024 006 001 10 8483 024 006 025 10 8483 024 006 049
Solder hole 42 (3 x 14) 6 a + b + c fully loaded 10 8483 042 006 001 10 8483 042 006 025 10 8483 042 006 049
rows a + c 6.1 mm 60 (3 x 20) 4 a + b + c fully loaded 10 8483 060 006 001 10 8483 060 006 025 10 8483 060 006 049
row b 8.8 mm 78 (3 x 28) 2 a + b + c fully loaded 10 8483 078 006 001 10 8483 078 006 025 10 8483 078 006 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #199. Visit our website http://www.avxcorp.com

ELCO 199
DIN 41612 Connectors
Series 8483 – Female Style M - Fully Loaded - 3 Rows
(3 x 2, 8, 14, 20 or 28) - .100 Pitch
Dimensions

Contact Design No. of Cavities No. of Cavities Part Number

and for Single for Special Loading Performance classes according to DIN 41612
Termination Length Positions Positions Description III II I
6 (3 x 2) 10 a + b + c fully loaded 20 8483 006 001 001 20 8483 006 001 025 20 8483 006 001 049
24 (3 x 8) 8 a + b + c fully loaded 20 8483 024 001 001 20 8483 024 001 025 20 8483 024 001 049
42 (3 x 14) 6 a + b + c fully loaded 20 8483 042 001 001 20 8483 042 001 025 20 8483 042 001 049
4.5 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8483 060 001 001 20 8483 060 001 025 20 8483 060 001 049
Straight 78 (2 x 28) 2 a + b + c fully loaded 20 8483 078 001 001 20 8483 078 001 025 20 8483 078 001 049
6 (3 x 2) 10 a + b + c fully loaded 20 8483 006 002 001 20 8483 006 002 025 20 8483 006 002 049
24 (3 x 8) 8 a + b + c fully loaded 20 8483 024 002 001 20 8483 024 002 025 20 8483 024 002 049
42 (3 x 14) 6 a + b + c fully loaded 20 8483 042 002 001 20 8483 042 002 025 20 8483 042 002 049
2.9 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8483 060 002 001 20 8483 060 002 025 20 8483 060 002 049
Straight 78 (2 x 28) 2 a + b + c fully loaded 20 8483 078 002 001 20 8483 078 002 025 20 8483 078 002 049
6 (3 x 2) 10 a + b + c fully loaded 20 8483 006 003 001 20 8483 006 003 025 20 8483 006 003 049
24 (3 x 8) 8 a + b + c fully loaded 20 8483 024 003 001 20 8483 024 003 025 20 8483 024 003 049
42 (3 x 14) 6 a + b + c fully loaded 20 8483 042 003 001 20 8483 042 003 025 20 8483 042 003 049
13.0 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8483 060 003 001 20 8483 060 003 025 20 8483 060 003 049
Straight 78 (2 x 28) 2 a + b + c fully loaded 20 8483 078 003 001 20 8483 078 003 025 20 8483 078 003 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #200. Visit our website http://www.avxcorp.com

200 ELCO
DIN 41612 Connectors
Series 8483 – Male Style M - a + c Loaded - 3 Rows
(3 x 2, 8, 14, 20 or 28) - .100 Pitch
Dimensions

Contact Design No. of Cavities No. of Cavities Part Number

and for Single for Special Loading Performance classes according to DIN 41612
Termination Length Positions Positions Description III II I
6 (3 x 2) 10 a + c fully loaded 10 8483 006 001 002 10 8483 006 001 026 10 8483 006 001 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 001 002 10 8483 024 001 026 10 8483 024 001 050
42 (3 x 14) 6 a + c fully loaded 10 8483 042 001 002 10 8483 042 001 026 10 8483 042 001 050
3.0 mm (Y) 60 (3 x 20) 4 a + c fully loaded 10 8483 060 001 002 10 8483 060 001 026 10 8483 060 001 050
Straight 78 (3 x 28) 2 a + c fully loaded 10 8483 078 001 002 10 8483 078 001 026 10 8483 078 001 050
6 (3 x 2) 10 a + c fully loaded 10 8483 006 002 002 10 8483 006 002 026 10 8483 006 002 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 002 002 10 8483 024 002 026 10 8483 024 002 050
42 (3 x 14) 6 a + c fully loaded 10 8483 042 002 002 10 8483 042 002 026 10 8483 042 002 050
11.4 mm (Y) 60 (3 x 20) 4 a + c fully loaded 10 8483 060 002 002 10 8483 060 002 026 10 8483 060 002 050
Straight 78 (3 x 28) 2 a + c fully loaded 10 8483 078 002 002 10 8483 078 002 026 10 8483 078 002 050
6 (3 x 2) 10 a + c fully loaded 10 8483 006 003 002 10 8483 006 003 026 10 8483 006 003 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 003 002 10 8483 024 003 026 10 8483 024 003 050
42 (3 x 14) 6 a + c fully loaded 10 8483 042 003 002 10 8483 042 003 026 10 8483 042 003 050
3.0 mm (Y) 60 (3 x 20) 4 a + c fully loaded 10 8483 060 003 002 10 8483 060 003 026 10 8483 060 003 050
Right Angled 78 (3 x 28) 2 a + c fully loaded 10 8483 078 003 002 10 8483 078 003 026 10 8483 078 003 050
6 (3 x 2) 10 a + c fully loaded 10 8483 006 004 002 10 8483 006 004 026 10 8483 006 004 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 004 002 10 8483 024 004 026 10 8483 024 004 050
42 (3 x 14) 6 a + c fully loaded 10 8483 042 004 002 10 8483 042 004 026 10 8483 042 004 050
11.3mm (Y) 60 (3 x 20) 4 a + c fully loaded 10 8483 060 004 002 10 8483 060 004 026 10 8483 060 004 050
Right Angled 78 (3 x 28) 2 a + c fully loaded 10 8483 078 004 002 10 8483 078 004 026 10 8483 078 004 050
6 (3 x 2) 10 a + c fully loaded 10 8483 006 005 002 10 8483 006 005 026 10 8483 006 005 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 005 002 10 8483 024 005 026 10 8483 024 005 050
Solder eyelet 42 (3 x 14) 6 a + c fully loaded 10 8483 042 005 002 10 8483 042 005 026 10 8483 042 005 050
rows a + c 4.8 mm 60 (3 x 20) 4 a + c fully loaded 10 8483 060 005 002 10 8483 060 005 026 10 8483 060 005 050
row b 7.5 mm 78 (3 x 28) 2 a + c fully loaded 10 8483 078 005 002 10 8483 078 005 026 10 8483 078 005 050
6 (3 x 2) 10 a + c fully loaded 10 8483 006 006 002 10 8483 006 006 026 10 8483 006 006 050
24 (3 x 8) 8 a + c fully loaded 10 8483 024 006 002 10 8483 024 006 026 10 8483 024 006 050
Solder hole 42 (3 x 14) 6 a + c fully loaded 10 8483 042 006 002 10 8483 042 006 026 10 8483 042 006 050
rows a + c 6.1 mm 60 (3 x 20) 4 a + c fully loaded 10 8483 060 006 002 10 8483 060 006 026 10 8483 060 006 050
row b 8.8 mm 78 (3 x 28) 2 a + c fully loaded 10 8483 078 006 002 10 8483 078 006 026 10 8483 078 006 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #201. Visit our website http://www.avxcorp.com

ELCO 201
DIN 41612 Connectors
Series 8483 – Female Style M - a + c Loaded - 3 Rows
(3 x 2, 8, 14, 20 or 28) - .100 Pitch
Dimensions

Contact Design No. of Cavities No. of Cavities Part Number

and for Single for Special Loading Performance classes according to DIN 41612
Termination Length Positions Positions Description III II I
6 (3 x 2) 10 a + c fully loaded 20 8483 006 001 002 20 8483 006 001 026 20 8483 006 001 050
24 (3 x 8) 8 a + c fully loaded 20 8483 024 001 002 20 8483 024 001 026 20 8483 024 001 050
42 (3 x 14) 6 a + c fully loaded 20 8483 042 001 002 20 8483 042 001 026 20 8483 042 001 050
4.5 mm (Y) 60 (3 x 20) 4 a + c fully loaded 20 8483 060 001 002 20 8483 060 001 026 20 8483 060 001 050
Straight 78 (2 x 28) 2 a + c fully loaded 20 8483 078 001 002 20 8483 078 001 026 20 8483 078 001 050
6 (3 x 2) 10 a + c fully loaded 20 8483 006 002 002 20 8483 006 002 026 20 8483 006 002 050
24 (3 x 8) 8 a + c fully loaded 20 8483 024 002 002 20 8483 024 002 026 20 8483 024 002 050
42 (3 x 14) 6 a + c fully loaded 20 8483 042 002 002 20 8483 042 002 026 20 8483 042 002 050
2.9 mm (Y) 60 (3 x 20) 4 a + c fully loaded 20 8483 060 002 002 20 8483 060 002 026 20 8483 060 002 050
Straight 78 (2 x 28) 2 a + c fully loaded 20 8483 078 002 002 20 8483 078 002 026 20 8483 078 002 050
6 (3 x 2) 10 a + c fully loaded 20 8483 006 003 002 20 8483 006 003 026 20 8483 006 003 050
24 (3 x 8) 8 a + c fully loaded 20 8483 024 003 002 20 8483 024 003 026 20 8483 024 003 050
42 (3 x 14) 6 a + c fully loaded 20 8483 042 003 002 20 8483 042 003 026 20 8483 042 003 050
13.0 mm (Y) 60 (3 x 20) 4 a + c fully loaded 20 8483 060 003 002 20 8483 060 003 026 20 8483 060 003 050
Right Angled 78 (2 x 28) 2 a + c fully loaded 20 8483 078 003 002 20 8483 078 003 026 20 8483 078 003 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #202. Visit our website http://www.avxcorp.com

202 ELCO
DIN 41612 Connectors
Series 8489 – Style M Contacts - Special Contacts for
Style M Connectors
Coax Plug Contact for Receptacle Series 8483/8484 Dimensions: inches/millimeters
Termination Dimensions Order Code
Variation Outer Inner
Conductor Conductor [A [B [C Perf. Class I
CRIMP SOLDER .041/1.05 .067/1.70 .089/2.25 60 8489 020 001 (049)
CRIMP SOLDER .067/1.70 .106/2.70 .126/3.20 60 8489 020 002 (049)
CRIMP SOLDER .067/1.70 .106/2.70 .141/3.58 60 8489 020 003 (049)

SOLDER SOLDER .051/1.30 .075/1.90 .087/2.20 60 8489 020 004 (049)

SOLDER SOLDER .089/2.25 .114/2.90 .126/3.20 60 8489 020 005 (049)

CRIMP SOLDER .041/1.05 .067/1.70 .089/2.25 60 8489 020 006 (049)

CRIMP SOLDER .067/1.70 .106/2.70 .126/3.20 60 8489 020 007 (049)
CRIMP SOLDER .067/1.70 .106/2.70 .140/3.55 60 8489 020 008 (049)

CRIMP SOLDER .041/1.05 .067/1.70 .089/2.25 60 8489 020 009 (049)

CRIMP SOLDER .067/1.70 .106/2.70 .126/3.20 60 8489 020 010 (049)
CRIMP SOLDER .067/1.70 .106/2.70 .140/3.55 60 8489 020 011 (049)

P.C. (1) P.C. (1) 60 8489 020 012 (049)

(1) Not applicable for receptacles with P.C. and Press-fit termination.

Coax Receptacle Contact for Plug Series 8483 Dimensions: inches/millimeters

Termination Dimensions Order Code
Variation Outer Inner
Conductor Conductor [A [B [C Perf. Class I
CRIMP SOLDER .067/1.70 .106/2.70 .140/3.55 60 8489 030 001 (049)
CRIMP SOLDER .067/1.70 .106/2.70 .126/3.20 60 8489 030 002 (049)
CRIMP SOLDER .041/1.05 .067/1.70 .089/2.25 60 8489 030 003 (049)

SOLDER SOLDER .089/2.25 .114/2.90 .126/3.20 60 8489 030 004 (049)

SOLDER SOLDER .051/1.30 .075/1.90 .087/2.20 60 8489 030 005 (049)

CRIMP SOLDER .067/1.70 .106/2.70 .126/3.20 60 8489 030 006 (049)

CRIMP SOLDER .041/1.05 .067/1.70 .089/2.25 60 8489 030 007 (049)

P.C. P.C. 60 8489 030 008 (049)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #203. Visit our website http://www.avxcorp.com

ELCO 203
DIN 41612 Connectors
Series 8489 – Style M Contacts - Special Contacts for
Style M Connectors
High Voltage Plug Contact for Receptacle Series 8483/8484
Ordering Code
Variation Termination Performance
Perf. Class I

SOLDER CABLE OUTLET STRAIGHT

AWG 20 maximum 2.8 KV max 60 8489 070 001 049

SOLDER CABLE OUTLET 90°

AWG 20 maximum 2.8 KV max 60 8489 070 002 049

High Voltage Receptacle Contact for Plug Series 8483/8484

Ordering Code
Variation Termination Performance
Perf. Class I

SOLDER CABLE OUTLET STRAIGHT

AWG 20 maximum 2.8 KV max 60 8489 060 001 049

SOLDER CABLE OUTLET 90°

AWG 20 maximum 2.8 KV max 60 8489 060 002 049

High Power Plug Contact for Plug Series 8483/8484

Variation Termination [A* Performance Ordering Code
SOLDER .189 (4.80) 40 Ampere max. 60 8489 040 001 049
SOLDER .138 (3.50) 30 Ampere max. 60 8489 040 002 049
SOLDER .110 (2.80) 20 Ampere max. 60 8489 040 003 049
SOLDER .067 (1.70) 10 Ampere max. 60 8489 040 004 049
CRIMP .189 (4.80) 40 Ampere max. 60 8489 040 005 049
CRIMP .138 (3.50) 30 Ampere max. 60 8489 040 006 049
CRIMP .110 (2.80) 20 Ampere max. 60 8489 040 007 049
CRIMP .067 (1.70) 10 Ampere max. 60 8489 040 008 049

P.C. Contact 40 Ampere max. 60 8489 040 009 049

High Power Receptacle Contact for Receptacle Series 8483/8484

Variation Termination [A* Performance Ordering Code
SOLDER .189 (4.80) 40 Ampere max. 60 8489 050 001 049
SOLDER .138 (3.50) 30 Ampere max. 60 8489 050 002 049
SOLDER .110 (2.80) 20 Ampere max. 60 8489 050 003 049
SOLDER .067 (1.70) 10 Ampere max. 60 8489 050 004 049
CRIMP .189 (4.80) 40 Ampere max. 60 8489 050 005 049
CRIMP .138 (3.50) 30 Ampere max. 60 8489 050 006 049
CRIMP .110 (2.80) 20 Ampere max. 60 8489 050 007 049
CRIMP .067 (1.70) 10 Ampere max. 60 8489 050 008 049
*[A: inner diameter of contact sleeve.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #204. Visit our website http://www.avxcorp.com

204 ELCO
DIN 41612 Connectors
Series 8477 – Male Style 1⁄2 Q - 2 Rows (2 x 16) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
032 2 (2 x 16) 15 1.500 1.760 1.862 1.968 2.162
(38.10) (44.70) (47.29) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
32 a + b fully loaded 10 8477 032 001 001 10 8477 032 001 025 10 8477 032 001 049
16 a + b even loading 10 8477 032 001 007 10 8477 032 001 031 10 8477 032 001 055
2.9 mm (Y) 16 a loading only 10 8477 032 001 003 10 8477 032 001 027 10 8477 032 001 051
Straight 30 + 2 fully loaded + ground 10 9477 032 101 001 10 8477 032 101 025 10 8477 032 101 049
32 a + b fully loaded 10 8477 032 002 001 10 8477 032 002 025 10 8477 032 002 049
16 a + b even loading 10 8477 032 002 007 10 8477 032 002 031 10 8477 032 002 055
4.5 mm (Y) 16 a loading only 10 8477 032 002 003 10 8477 032 002 027 10 8477 032 002 051
Straight 30 + 2 fully loaded + ground 10 8477 032 102 001 10 8477 032 102 025 10 8477 032 102 049
32 a + b fully loaded 10 8477 032 005 001 10 8477 032 005 025 10 8477 032 005 049
9.5 mm (Y) 16 a + b even loading 10 8477 032 005 007 10 8477 032 005 031 10 8477 032 005 055
Straight 16 a loading only 10 8477 032 005 003 10 8477 032 005 027 10 8477 032 005 051
32 a + b fully loaded 10 8477 032 006 001 10 8477 032 006 025 10 8477 032 006 049
13.0 mm (Y) 16 a + b even loading 10 8477 032 006 007 10 8477 032 006 031 10 8477 032 006 055
Straight 16 a loading only 10 8477 032 006 003 10 8477 032 006 027 10 8477 032 006 051
32 a + b fully loaded 10 8477 032 007 001 10 8477 032 007 025 10 8477 032 007 049
14.5 mm (Y) 16 a + b even loading 10 8477 032 007 007 10 8477 032 007 031 10 8477 032 007 055
Straight 16 a loading only 10 8477 032 007 003 10 8477 032 007 027 10 8477 032 007 051
32 a + b fully loaded 10 8477 032 009 001 10 8477 032 009 025 10 8477 032 009 049
8.8, 11.5, 8.8 mm (Y) 16 a + b even loading 10 8477 032 009 007 10 8477 032 009 031 10 8477 032 009 055
Solder Hole 16 a loading only 10 8477 032 009 003 10 8477 032 009 027 10 8477 032 009 051
32 a + b fully loaded 10 8477 032 010 001 10 8477 032 010 025 10 8477 032 010 049
7.5, 10.2, 7.5 mm (Y) 16 a + b even loading 10 8477 032 010 007 10 8477 032 010 031 10 8477 032 010 055
Solder Loop 16 a loading only 10 8477 032 010 003 10 8477 032 010 027 10 8477 032 010 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #205. Visit our website http://www.avxcorp.com

ELCO 205
DIN 41612 Connectors
Series 8477 – Female Style 1⁄2 Q - 2 Rows (2 x 16) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
032 2 (2 x 16) 15 1.500 2.122 1.900 1.744
(38.10) (53.90) (48.26) (44.30)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
32 a + b fully loaded 20 8477 032 002 001 20 8477 032 002 025 20 8477 032 002 049
0.6 x 0.6 mm Post Profile 16 a + b all even loading 20 8477 032 002 007 20 8477 032 002 031 20 8477 032 002 055
3.0 mm (Y) Right Angled 16 a loading only 20 8477 032 002 003 20 8477 032 002 027 20 8477 032 002 051
32 a + b fully loaded 20 8477 032 006 001 20 8477 032 006 025 20 8477 032 006 049
0.3 x 0.79 mm Post Profile 16 a + b all even loading 20 8477 032 006 007 20 8477 032 006 031 20 8477 032 006 055
3.0 mm (Y) Right Angled 16 a loading only 20 8477 032 006 003 20 8477 032 006 027 20 8477 032 006 051
32 a + b fully loaded 20 8477 032 008 001 20 8477 032 008 025 20 8477 032 008 049
0.6 x 0.6 mm Post Profile 16 a + b all even loading 20 8477 032 008 007 20 8477 032 008 031 20 8477 032 008 055
11.43 mm (Y) Right Angled 16 a loading only 20 8477 032 008 003 20 8477 032 008 027 20 8477 032 008 051
32 a + b fully loaded 20 8477 032 009 001 20 8477 032 009 025 20 8477 032 009 049
0.3 x 0.79 mm Post Profile 16 a + b all even loading 20 8477 032 009 007 20 8477 032 009 031 20 8477 032 009 055
4.5 mm (Y) Right Angled 16 a loading only 20 8477 032 009 003 20 8477 032 009 027 20 8477 032 009 051
32 a + b fully loaded 20 8477 032 012 001 20 8477 032 012 025 20 8477 032 012 049
0.6 x 0.6 mm Post Profile 16 a + b all even loading 20 8477 032 012 007 20 8477 032 012 031 20 8477 032 012 055
4.5 mm (Y) Right Angled 16 a loading only 20 8477 032 012 003 20 8477 032 012 027 20 8477 032 012 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #206. Visit our website http://www.avxcorp.com

206 ELCO
DIN 41612 Connectors
Series 8477 – Male Style Q - 2 Rows (2 x 32) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
064 2 (2 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
64 a + b fully loaded 10 8477 064 001 001 10 8477 064 001 025 10 8477 064 001 049
32 a + b even loading 10 8477 064 001 007 10 8477 064 001 031 10 8477 064 001 055
2.9 mm (Y) 32 a loading only 10 8477 064 001 003 10 8477 064 001 027 10 8477 064 001 051
Straight 62 + 2 fully loaded + ground 10 9477 064 101 001 10 8477 064 101 025 10 8477 064 101 049
64 a + b fully loaded 10 8477 064 002 001 10 8477 064 002 025 10 8477 064 002 049
32 a + b even loading 10 8477 064 002 007 10 8477 064 002 031 10 8477 064 002 055
4.5 mm (Y) 32 a loading only 10 8477 064 002 003 10 8477 064 002 027 10 8477 064 002 051
Straight 62 + 2 fully loaded + ground 10 8477 064 102 001 10 8477 064 102 025 10 8477 064 102 049
64 a + b fully loaded 10 8477 064 005 001 10 8477 064 005 025 10 8477 064 005 049
9.5 mm (Y) 32 a + b even loading 10 8477 064 005 007 10 8477 064 005 031 10 8477 064 005 055
Straight 32 a loading only 10 8477 064 005 003 10 8477 064 005 027 10 8477 064 005 051
64 a + b fully loaded 10 8477 064 006 001 10 8477 064 006 025 10 8477 064 006 049
13.0 mm (Y) 32 a + b even loading 10 8477 064 006 007 10 8477 064 006 031 10 8477 064 006 055
Straight 32 a loading only 10 8477 064 006 003 10 8477 064 006 027 10 8477 064 006 051
64 a + b fully loaded 10 8477 064 007 001 10 8477 064 007 025 10 8477 064 007 049
14.5 mm (Y) 32 a + b even loading 10 8477 064 007 007 10 8477 064 007 031 10 8477 064 007 055
Straight 32 a loading only 10 8477 064 007 003 10 8477 064 007 027 10 8477 064 007 051
64 a + b fully loaded 10 8477 064 009 001 10 8477 064 009 025 10 8477 064 009 049
8.8, 11.5, 8.8 mm (Y) 32 a + b even loading 10 8477 064 009 007 10 8477 064 009 031 10 8477 064 009 055
Solder Hole 32 a loading only 10 8477 064 009 003 10 8477 064 009 027 10 8477 064 009 051
64 a + b fully loaded 10 8477 064 010 001 10 8477 064 010 025 10 8477 064 010 049
7.5, 10.2, 7.5 mm (Y) 32 a + b even loading 10 8477 064 010 007 10 8477 064 010 031 10 8477 064 010 055
Solder Loop 32 a loading only 10 8477 064 010 003 10 8477 064 010 027 10 8477 064 010 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #207. Visit our website http://www.avxcorp.com

ELCO 207
DIN 41612 Connectors
Series 8477 – Male Style 1⁄3 R - 3 Rows (3 x 10) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
030 3 (3 x 10) 9 0.900 1.159 1.265 1.368 1.565
(22.86) (29.44) (32.12) (34.76) (39.76)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
30 a + b + c fully loaded 10 8477 030 001 001 10 8477 030 001 025 10 8477 030 001 049
20 a + c fully loaded 10 8477 030 001 002 10 8477 030 001 026 10 8477 030 001 050
10 a + c even loading 10 8477 030 001 009 10 8477 030 001 033 10 8477 030 001 057
2.9 mm (Y) 10 a loading only 10 8477 030 001 003 10 8477 030 001 027 10 8477 030 001 051
Straight 28 + 2 fully loaded + ground 10 9477 030 101 001 10 8477 030 101 025 10 8477 030 101 049
30 a + b + c fully loaded 10 8477 030 002 001 10 8477 030 002 025 10 8477 030 002 049
20 a + c fully loaded 10 8477 030 002 002 10 8477 030 002 026 10 8477 030 002 050
10 a + c even loading 10 8477 030 002 009 10 8477 030 002 033 10 8477 030 002 057
4.5 mm (Y) 10 a loading only 10 8477 030 002 003 10 8477 030 002 027 10 8477 030 002 051
Straight 28 + 2 fully loaded + ground 10 8477 030 102 001 10 8477 030 102 025 10 8477 030 102 049
30 a + b + c fully loaded 10 8477 030 005 001 10 8477 030 005 025 10 8477 030 005 049
20 a + c fully loaded 10 8477 030 005 002 10 8477 030 005 026 10 8477 030 005 050
9.5 mm (Y) 10 a + c even loading 10 8477 030 005 009 10 8477 030 005 033 10 8477 030 005 057
Straight 10 a loading only 10 8477 030 005 003 10 8477 030 005 027 10 8477 030 005 051
30 a + b + c fully loaded 10 8477 030 006 001 10 8477 030 006 025 10 8477 030 006 049
20 a + c fully loaded 10 8477 030 006 002 10 8477 030 006 026 10 8477 030 006 050
10 a + c even loading 10 8477 030 006 009 10 8477 030 006 033 10 8477 030 006 057
13.0 mm (Y) 10 a loading only 10 8477 030 006 003 10 8477 030 006 027 10 8477 030 006 051
Straight 28 + 2 fully loaded + ground 10 8477 030 106 001 10 8477 030 106 025 10 8477 030 106 049
96 a + b + c fully loaded 10 8477 030 007 001 10 8477 030 007 025 10 8477 030 007 049
64 a + c fully loaded 10 8477 030 007 002 10 8477 030 007 026 10 8477 030 007 050
14.5 mm (Y) 32 a + c even loading 10 8477 030 007 009 10 8477 030 007 033 10 8477 030 007 057
Straight 32 a loading only 10 8477 030 007 003 10 8477 030 007 027 10 8477 030 007 051
30 a + b + c fully loaded 10 8477 030 009 001 10 8477 030 009 025 10 8477 030 009 049
20 a + c fully loaded 10 8477 030 009 002 10 8477 030 009 026 10 8477 030 009 050
8.8, 11.5, 8.8 mm (Y) 10 a + c even loading 10 8477 030 009 009 10 8477 030 009 033 10 8477 030 009 057
Solder Hole 10 a loading only 10 8477 030 009 003 10 8477 030 009 027 10 8477 030 009 051
30 a + b + c fully loaded 10 8477 030 010 001 10 8477 030 010 025 10 8477 030 010 049
20 a + c fully loaded 10 8477 030 010 002 10 8477 030 010 026 10 8477 030 010 050
7.5, 10.2, 7.5 mm (Y) 10 a + c even loading 10 8477 030 010 009 10 8477 030 010 033 10 8477 030 010 057
Solder Loop 10 a loading only 10 8477 030 010 003 10 8477 030 010 027 10 8477 030 010 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #208. Visit our website http://www.avxcorp.com

208 ELCO
DIN 41612 Connectors
Series 8477 – Female Style Q - 2 Rows (2 x 32) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.697 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
64 a + b fully loaded 20 8477 064 002 001 20 8477 064 002 025 20 8477 064 002 049
0.6 x 0.6 mm Post Profile 32 a + b all even loading 20 8477 064 002 007 20 8477 064 002 031 20 8477 064 002 055
3.0 mm (Y) Right Angled 32 a loading only 20 8477 064 002 003 20 8477 064 002 027 20 8477 064 002 051
64 a + b fully loaded 20 8477 064 006 001 20 8477 064 006 025 20 8477 064 006 049
0.3 x 0.79 mm Post Profile 32 a + b all even loading 20 8477 064 006 007 20 8477 064 006 031 20 8477 064 006 055
3.0 mm (Y) Right Angled 32 a loading only 20 8477 064 006 003 20 8477 064 006 027 20 8477 064 006 051
64 a + b fully loaded 20 8477 064 008 001 20 8477 064 008 025 20 8477 064 008 049
0.6 x 0.6 mm Post Profile 32 a + b all even loading 20 8477 064 008 007 20 8477 064 008 031 20 8477 064 008 055
11.43 mm (Y) Right Angled 32 a loading only 20 8477 064 008 003 20 8477 064 008 027 20 8477 064 008 051
64 a + b fully loaded 20 8477 064 009 001 20 8477 064 009 025 20 8477 064 009 049
0.3 x 0.79 mm Post Profile 32 a + b all even loading 20 8477 064 009 007 20 8477 064 009 031 20 8477 064 009 055
4.5 mm (Y) Right Angled 32 a loading only 20 8477 064 009 003 20 8477 064 009 027 20 8477 064 009 051
64 a + b fully loaded 20 8477 064 012 001 20 8477 064 012 025 20 8477 064 012 049
0.6 x 0.6 mm Post Profile 32 a + b all even loading 20 8477 064 012 007 20 8477 064 012 031 20 8477 064 012 055
4.5 mm (Y) Right Angled 32 a loading only 20 8477 064 012 003 20 8477 064 012 027 20 8477 064 012 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #209. Visit our website http://www.avxcorp.com

ELCO 209
DIN 41612 Connectors
Series 8477 – Male Style 1⁄2 R - 3 Rows (3 x 16) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
048 3 (3 x 16) 15 1.500 1.760 1.862 1.968 2.162
(38.10) (44.70) (47.29) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 10 8477 048 001 001 10 8477 048 001 025 10 8477 048 001 049
32 a + c fully loaded 10 8477 048 001 002 10 8477 048 001 026 10 8477 048 001 050
16 a + c even loading 10 8477 048 001 009 10 8477 048 001 033 10 8477 048 001 057
2.9 mm (Y) 16 a loading only 10 8477 048 001 003 10 8477 048 001 027 10 8477 048 001 051
Straight 46 + 2 fully loaded + ground 10 9477 048 101 001 10 8477 048 101 025 10 8477 048 101 049
48 a + b + c fully loaded 10 8477 048 002 001 10 8477 048 002 025 10 8477 048 002 049
32 a + c fully loaded 10 8477 048 002 002 10 8477 048 002 026 10 8477 048 002 050
16 a + c even loading 10 8477 048 002 009 10 8477 048 002 033 10 8477 048 002 057
4.5 mm (Y) 16 a loading only 10 8477 048 002 003 10 8477 048 002 027 10 8477 048 002 051
Straight 46 + 2 fully loaded + ground 10 8477 048 102 001 10 8477 048 102 025 10 8477 048 102 049
48 a + b + c fully loaded 10 8477 048 005 001 10 8477 048 005 025 10 8477 048 005 049
32 a + c fully loaded 10 8477 048 005 002 10 8477 048 005 026 10 8477 048 005 050
9.5 mm (Y) 16 a + c even loading 10 8477 048 005 009 10 8477 048 005 033 10 8477 048 005 057
Straight 16 a loading only 10 8477 048 005 003 10 8477 048 005 027 10 8477 048 005 051
48 a + b + c fully loaded 10 8477 048 006 001 10 8477 048 006 025 10 8477 048 006 049
32 a + c fully loaded 10 8477 048 006 002 10 8477 048 006 026 10 8477 048 006 050
16 a + c even loading 10 8477 048 006 009 10 8477 048 006 033 10 8477 048 006 057
13.0 mm (Y) 16 a loading only 10 8477 048 006 003 10 8477 048 006 027 10 8477 048 006 051
Straight 46 + 2 fully loaded + ground 10 8477 048 106 001 10 8477 048 106 025 10 8477 048 106 049
48 a + b + c fully loaded 10 8477 048 007 001 10 8477 048 007 025 10 8477 048 007 049
32 a + c fully loaded 10 8477 048 007 002 10 8477 048 007 026 10 8477 048 007 050
14.5 mm (Y) 16 a + c even loading 10 8477 048 007 009 10 8477 048 007 033 10 8477 048 007 057
Straight 16 a loading only 10 8477 048 007 003 10 8477 048 007 027 10 8477 048 007 051
48 a + b + c fully loaded 10 8477 048 009 001 10 8477 048 009 025 10 8477 048 009 049
32 a + c fully loaded 10 8477 048 009 002 10 8477 048 009 026 10 8477 048 009 050
8.8, 11.5, 8.8 mm (Y) 16 a + c even loading 10 8477 048 009 009 10 8477 048 009 033 10 8477 048 009 057
Solder Hole 16 a loading only 10 8477 048 009 003 10 8477 048 009 027 10 8477 048 009 051
48 a + b + c fully loaded 10 8477 048 010 001 10 8477 048 010 025 10 8477 048 010 049
32 a + c fully loaded 10 8477 048 010 002 10 8477 048 010 026 10 8477 048 010 050
7.5, 10.2, 7.5 mm (Y) 16 a + c even loading 10 8477 048 010 009 10 8477 048 010 033 10 8477 048 010 057
Solder Loop 16 a loading only 10 8477 048 010 003 10 8477 048 010 027 10 8477 048 010 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #210. Visit our website http://www.avxcorp.com

210 ELCO
DIN 41612 Connectors
Series 8477 – Female Style 1⁄2 R - 3 Rows (3 x 16) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 15 1.500 2.122 1.900 1.744
(38.10) (53.90) (48.26) (44.30)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 20 8477 048 002 001 20 8477 048 002 025 20 8477 048 002 049
32 a + c fully loaded 20 8477 048 002 002 20 8477 048 002 026 20 8477 048 002 050
0.6 x 0.6 mm Post Profile 16 a + c even loading 20 8477 048 002 009 20 8477 048 002 033 20 8477 048 002 057
3.0 mm (Y) Right Angled 16 a loading only 20 8477 048 002 003 20 8477 048 002 027 20 8477 048 002 051
48 a + b + c fully loaded 20 8477 048 006 001 20 8477 048 006 025 20 8477 048 006 049
32 a + c fully loaded 20 8477 048 006 002 20 8477 048 006 026 20 8477 048 006 050
0.3 x 0.79 mm Post Profile 16 a + c even loading 20 8477 048 006 009 20 8477 048 006 033 20 8477 048 006 057
3.0 mm (Y) Right Angled 16 a loading only 20 8477 048 006 003 20 8477 048 006 027 20 8477 048 006 051
48 a + b + c fully loaded 20 8477 048 008 001 20 8477 048 008 025 20 8477 048 008 049
32 a + c fully loaded 20 8477 048 008 002 20 8477 048 008 026 20 8477 048 008 050
0.6 x 0.6 mm Post Profile 16 a + c even loading 20 8477 048 008 009 20 8477 048 008 033 20 8477 048 008 057
11.43 mm (Y) Right Angled 16 a loading only 20 8477 048 008 003 20 8477 048 008 027 20 8477 048 008 051
48 a + b + c fully loaded 20 8477 048 009 001 20 8477 048 009 025 20 8477 048 009 049
32 a + c fully loaded 20 8477 048 009 002 20 8477 048 009 026 20 8477 048 009 050
0.3 x 0.79 mm Post Profile 16 a + c even loading 20 8477 048 009 009 20 8477 048 009 033 20 8477 048 009 057
4.5 mm (Y) Right Angled 16 a loading only 20 8477 048 009 003 20 8477 048 009 027 20 8477 048 009 051
48 a + b + c fully loaded 20 8477 048 012 001 20 8477 048 012 025 20 8477 048 012 049
32 a + c fully loaded 20 8477 048 012 002 20 8477 048 012 026 20 8477 048 012 050
0.6 x 0.6 mm Post Profile 16 a + c even loading 20 8477 048 012 009 20 8477 048 012 033 20 8477 048 012 057
4.5 mm (Y) Right Angled 16 a loading only 20 8477 048 012 003 20 8477 048 012 027 20 8477 048 012 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #211. Visit our website http://www.avxcorp.com

ELCO 211
DIN 41612 Connectors
Series 8477 – Male Style R - 3 Rows (3 x 32) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
096 3 (3 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 10 8477 096 001 001 10 8477 096 001 025 10 8477 096 001 049
64 a + c fully loaded 10 8477 096 001 002 10 8477 096 001 026 10 8477 096 001 050
32 a + c even loading 10 8477 096 001 009 10 8477 096 001 033 10 8477 096 001 057
2.9 mm (Y) 32 a loading only 10 8477 096 001 003 10 8477 096 001 027 10 8477 096 001 051
Straight 94 + 2 fully loaded + ground 10 9477 096 101 001 10 8477 096 101 025 10 8477 096 101 049
96 a + b + c fully loaded 10 8477 096 002 001 10 8477 096 002 025 10 8477 096 002 049
64 a + c fully loaded 10 8477 096 002 002 10 8477 096 002 026 10 8477 096 002 050
32 a + c even loading 10 8477 096 002 009 10 8477 096 002 033 10 8477 096 002 057
4.5 mm (Y) 32 a loading only 10 8477 096 002 003 10 8477 096 002 027 10 8477 096 002 051
Straight 94 + 2 fully loaded + ground 10 8477 096 102 001 10 8477 096 102 025 10 8477 096 102 049
96 a + b + c fully loaded 10 8477 096 005 001 10 8477 096 005 025 10 8477 096 005 049
64 a + c fully loaded 10 8477 096 005 002 10 8477 096 005 026 10 8477 096 005 050
9.5 mm (Y) 32 a + c even loading 10 8477 096 005 009 10 8477 096 005 033 10 8477 096 005 057
Straight 32 a loading only 10 8477 096 005 003 10 8477 096 005 027 10 8477 096 005 051
96 a + b + c fully loaded 10 8477 096 006 001 10 8477 096 006 025 10 8477 096 006 049
64 a + c fully loaded 10 8477 096 006 002 10 8477 096 006 026 10 8477 096 006 050
32 a + c even loading 10 8477 096 006 009 10 8477 096 006 033 10 8477 096 006 057
13.0 mm (Y) 32 a loading only 10 8477 096 006 003 10 8477 096 006 027 10 8477 096 006 051
Straight 94 + 2 fully loaded + ground 10 8477 096 106 001 10 8477 096 106 025 10 8477 096 106 049
96 a + b + c fully loaded 10 8477 096 007 001 10 8477 096 007 025 10 8477 096 007 049
64 a + c fully loaded 10 8477 096 007 002 10 8477 096 007 026 10 8477 096 007 050
14.5 mm (Y) 32 a + c even loading 10 8477 096 007 009 10 8477 096 007 033 10 8477 096 007 057
Straight 32 a loading only 10 8477 096 007 003 10 8477 096 007 027 10 8477 096 007 051
96 a + b + c fully loaded 10 8477 096 009 001 10 8477 096 009 025 10 8477 096 009 049
64 a + c fully loaded 10 8477 096 009 002 10 8477 096 009 026 10 8477 096 009 050
8.8, 11.5, 8.8 mm (Y) 32 a + c even loading 10 8477 096 009 009 10 8477 096 009 033 10 8477 096 009 057
Solder Hole 32 a loading only 10 8477 096 009 003 10 8477 096 009 027 10 8477 096 009 051
96 a + b + c fully loaded 10 8477 096 010 001 10 8477 096 010 025 10 8477 096 010 049
64 a + c fully loaded 10 8477 096 010 002 10 8477 096 010 026 10 8477 096 010 050
7.5, 10.2, 7.5 mm (Y) 32 a + c even loading 10 8477 096 010 009 10 8477 096 010 033 10 8477 096 010 057
Solder Loop 32 a loading only 10 8477 096 010 003 10 8477 096 010 027 10 8477 096 010 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #212. Visit our website http://www.avxcorp.com

212 ELCO
DIN 41612 Connectors
Series 8477 – Female Style R - 3 Rows (3 x 32) Inverted -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.367 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 20 8477 096 002 001 20 8477 096 002 025 20 8477 096 002 049
64 a + c fully loaded 20 8477 096 002 002 20 8477 096 002 026 20 8477 096 002 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8477 096 002 009 20 8477 096 002 033 20 8477 096 002 057
3.0 mm (Y) Right Angled 32 a loading only 20 8477 096 002 003 20 8477 096 002 027 20 8477 096 002 051
96 a + b + c fully loaded 20 8477 096 006 001 20 8477 096 006 025 20 8477 096 006 049
64 a + c fully loaded 20 8477 096 006 002 20 8477 096 006 026 20 8477 096 006 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8477 096 006 009 20 8477 096 006 033 20 8477 096 006 057
3.0 mm (Y) Right Angled 32 a loading only 20 8477 096 006 003 20 8477 096 006 027 20 8477 096 006 051
96 a + b + c fully loaded 20 8477 096 008 001 20 8477 096 008 025 20 8477 096 008 049
64 a + c fully loaded 20 8477 096 008 002 20 8477 096 008 026 20 8477 096 008 050
11.43 mm (Y) 32 a + c even loading 20 8477 096 008 009 20 8477 096 008 033 20 8477 096 008 057
Right Angled 32 a loading only 20 8477 096 008 003 20 8477 096 008 027 20 8477 096 008 051
96 a + b + c fully loaded 20 8477 096 009 001 20 8477 096 009 025 20 8477 096 009 049
64 a + c fully loaded 20 8477 096 009 002 20 8477 096 009 026 20 8477 096 009 050
4.5 mm (Y) 32 a + c even loading 20 8477 096 009 009 20 8477 096 009 033 20 8477 096 009 057
Right Angled 32 a loading only 20 8477 096 009 003 20 8477 096 009 027 20 8477 096 009 051
96 a + b + c fully loaded 20 8477 096 012 001 20 8477 096 012 025 20 8477 096 012 049
64 a + c fully loaded 20 8477 096 012 002 20 8477 096 012 026 20 8477 096 012 050
4.5 mm (Y) 32 a + c even loading 20 8477 096 012 009 20 8477 096 012 033 20 8477 096 012 057
Right Angled 32 a loading only 20 8477 096 012 003 20 8477 096 012 027 20 8477 096 012 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #213. Visit our website http://www.avxcorp.com

ELCO 213
DIN 41612 Connectors
Series 8477 – Male Style R Expanded - 4 Rows (4 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
128 4 (4 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

128 a + b + c + d fully loaded 10 8477 128 001 001 10 8477 128 001 026 10 8477 128 001 049
2.9 mm (Y) 126 + 2 4 rows fully loaded + ground 10 8477 128 101 001 10 8477 128 101 025 10 8477 128 101 049
Straight

128 a + b + c + d fully loaded 10 8477 128 002 001 10 8477 128 002 025 10 8477 128 002 049
4.5 mm (Y) 126 + 2 4 rows fully loaded + ground 10 8477 128 102 001 10 8477 128 102 025 10 8477 128 102 049
Straight

9.5 mm (Y) 128 a + b + c + d fully loaded 10 8477 128 005 001 10 8477 128 005 025 10 8477 128 005 049
Straight

13.0 mm (Y) 128 a + b + c + d fully loaded 10 8477 128 006 001 10 8477 128 006 025 10 8477 128 006 049
Straight

14.5 mm (Y) 128 a + b + c + d fully loaded 10 8477 128 007 001 10 8477 128 007 025 10 8477 128 007 049
Straight

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #214. Visit our website http://www.avxcorp.com

214 ELCO
DIN 41612 Connectors
Series 8477 – Female Style R Expanded - 4 Rows (4 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
128 4 (4 x 32) 31 3.100 3.697 3.500 3.343 0.437 0.516
(78.74) (93.90) (88.90) (84.90) (11.10) (13.10)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8477 128 002 001 20 8477 128 002 025 20 8477 128 002 049
3.0 mm (Y) Right Angled

0.3 x 0.79 mm Post Profile 128 a + b + c + d fully loaded 20 8477 128 006 001 20 8477 128 006 025 20 8477 128 006 049
3.0 mm (Y) Right Angled

0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8477 128 008 001 20 8477 128 008 025 20 8477 128 008 049
11.43 mm (Y) Right Angled

0.3 x 0.79 mm Post Profile 128 a + b + c + d fully loaded 20 8477 128 009 001 20 8477 128 009 025 20 8477 128 009 049
4.5 mm (Y) Right Angled

0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8477 128 012 001 20 8477 128 012 025 20 8477 128 012 049
4.5 mm (Y) Right Angled

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #215. Visit our website http://www.avxcorp.com

ELCO 215
DIN 41612 Connectors
Series 8477 – Male Style R Expanded - 5 Rows (5 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
60 5 (5 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

160 a + b + c + d + e fully loaded 10 8477 160 001 001 10 8477 160 001 025 10 8477 160 001 049
2.9 mm (Y) 158 + 2 5 rows fully loaded + ground 10 8477 160 101 001 10 8477 160 101 025 10 8477 160 101 049
Straight

160 a + b + c + d + e fully loaded 10 8477 160 002 001 10 8477 160 002 025 10 8477 160 002 049
4.5 mm (Y) 158 + 2 5 rows fully loaded + ground 10 8477 160 102 001 10 8477 160 102 025 10 8477 160 102 049
Straight

9.5 mm (Y) 160 a + b + c + d + e fully loaded 10 8477 160 105 001 10 8477 160 105 025 10 8477 160 105 049
Straight

13.0 mm (Y) 160 a + b + c + d + e fully loaded 10 8477 160 106 001 10 8477 160 106 025 10 8477 160 106 049
Straight

14.5 mm (Y) 160 a + b + c + d + e fully loaded 10 8477 160 107 001 10 8477 160 107 025 10 8477 160 107 049
Straight

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #216. Visit our website http://www.avxcorp.com

216 ELCO
DIN 41612 Connectors
Series 8477 – Female Style R Expanded - 5 Rows (5 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
160 5 (5 x 32) 31 3.100 3.697 3.500 3.343 0.437 0.516
(78.74) (93.90) (88.90) (84.90) (11.10) (13.10)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8477 160 002 001 20 8477 160 002 025 20 8477 160 002 049
3.0 mm (Y) Right Angled

0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8477 160 008 001 20 8477 160 008 025 20 8477 160 008 049
11.43 mm (Y) Right Angled

0.3 x 0.79 mm Post Profile 160 a + b + c + d + e fully loaded 20 8477 160 009 001 20 8477 160 009 025 20 8477 160 009 049
4.5 mm (Y) Right Angled

0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8477 160 012 001 20 8477 160 012 025 20 8477 160 012 049
4.5 mm (Y) Right Angled

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #217. Visit our website http://www.avxcorp.com

ELCO 217
DIN 41612 Connectors
Series 8477 – Female Style R Expanded - 3 Rows (3 x 50) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
150 3 (3 x 50) 49 4.491 5.496 5.300 5.142
(125.50) (139.60) (134.62) (130.61)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

0.6 x 0.6 mm Post Profile 100 a + c even loading 20 8477 150 008 002 20 8477 150 008 025 20 8477 150 008 050
11.43 mm (Y) Right Angled 150 a + b + c fully loaded 20 8477 150 008 001 20 8477 150 008 025 20 8477 150 008 049

0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8477 150 001 001 20 8477 150 01 025 20 8477 150 01 049
2.8 mm (Y) Right Angled 100 a + c even loading 20 8477 150 001 002 20 8477 150 01 026 20 8477 150 01 050

0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8477 150 002 001 20 8477 150 02 025 20 8477 150 02 049
3.0 mm (Y) Right Angled 100 a + c even loading 20 8477 150 002 002 20 8477 150 02 026 20 8477 150 02 050

0.3 x 0.79 mm Post Profile 150 a + b + c fully loaded 20 8477 150 006 001 20 8477 150 006 025 20 8477 150 006 049
3.0 mm (Y) Right Angled 100 a + c even loading 20 8477 150 006 002 20 8477 150 006 026 20 8477 150 006 050

0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8477 150 008 001 20 8477 150 008 025 20 8477 150 008 049
11.43 mm (Y) Right Angled 100 a + c even loading 20 8477 150 008 002 20 8477 150 008 026 20 8477 150 008 050

0.3 x 0.79 mm Post Profile 150 a + b + c fully loaded 20 8477 150 009 001 20 8477 150 009 025 20 8477 150 009 049
4.5 mm (Y) Right Angled 100 a + c even loading 20 8477 150 009 002 20 8477 150 009 026 20 8477 150 009 050

0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8477 150 012 001 20 8477 150 012 025 20 8477 150 012 049
4.5 mm (Y) Right Angled 100 a + c even loading 20 8477 150 012 002 20 8477 150 012 026 20 8477 150 012 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #218. Visit our website http://www.avxcorp.com

218 ELCO
DIN 41612 Connectors
Series 8458 – Male Style 1⁄2 B Press-Fit - 2 Rows (2 x 16) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
032 2 (2 x 16) 15 1.500 1.754 1.900 2.100
(38.10) (44.55) (48.26) (53.34)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8458 032 001 001 10 8458 032 001 025 10 8458 032 001 049
5.3 mm (Y) 16 a loading only 10 8458 032 001 003 10 8458 032 001 027 10 8458 032 001 051
Right Angled 30 + 2 fully loaded + ground 10 8458 032 101 001 10 8458 032 101 025 10 8458 032 101 049
for 1.6 mm PCB’s 32 a + b fully loaded 10 8458 032 031 001 10 8458 032 031 025 10 8458 032 031 049
3.0 mm (Y) 16 a loading only 10 8458 032 031 003 10 8458 032 031 027 10 8458 032 031 051
Right Angled 30 + 2 fully loaded + ground 10 8458 032 131 001 10 8458 032 131 025 10 8458 032 131 049

Series 8458 – Male Style B Press-Fit - 2 Rows (2 x 32) -

.100 Pitch

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.354 3.500 3.700
(78.74) (85.19) (88.90) (93.98)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8458 064 001 001 10 8458 064 001 025 10 8458 064 001 049
5.3 mm (Y) 32 a loading only 10 8458 064 001 003 10 8458 064 001 027 10 8458 064 001 051
Right Angled 62 + 2 fully loaded + ground 10 8458 064 101 001 10 8458 064 101 025 10 8458 064 101 049
for 1.6 mm PCB’s 64 a + b fully loaded 10 8458 064 031 001 10 8458 064 031 025 10 8458 064 031 049
3.0 mm (Y) 32 a loading only 10 8458 064 031 003 10 8458 064 031 027 10 8458 064 031 051
Right Angled 62 + 2 fully loaded + ground 10 8458 064 131 001 10 8458 064 131 025 10 8458 064 131 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #219. Visit our website http://www.avxcorp.com

ELCO 219
DIN 41612 Connectors
Series 8458 – Female Style B Press-Fit - 2 Rows (2 x 32) -
.100 Pitch
Dimensions

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 001 001 20 8458 064 001 025 20 8458 064 001 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 001 003 20 8458 064 001 027 20 8458 064 001 051
5.3 mm (Y) Straight 32 a loading only 20 8458 064 001 007 20 8458 064 001 031 20 8458 064 001 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 002 001 20 8458 064 002 025 20 8458 064 002 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 002 003 20 8458 064 002 027 20 8458 064 002 051
9.3 mm (Y) Straight 32 a loading only 20 8458 064 002 007 20 8458 064 002 031 20 8458 064 002 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 003 001 20 8458 064 003 025 20 8458 064 003 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 003 003 20 8458 064 003 027 20 8458 064 003 051
16.2 mm (Y) Straight 32 a loading only 20 8458 064 003 007 20 8458 064 003 031 20 8458 064 003 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 004 001 20 8458 064 004 025 20 8458 064 004 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 004 003 20 8458 064 004 027 20 8458 064 004 051
23.2 mm (Y) Straight 32 a loading only 20 8458 064 004 007 20 8458 064 004 031 20 8458 064 004 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 005 001 20 8458 064 005 025 20 8458 064 005 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 005 003 20 8458 064 005 027 20 8458 064 005 051
13.2 mm (Y) Straight 32 a loading only 20 8458 064 005 007 20 8458 064 005 031 20 8458 064 005 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 009 001 20 8458 064 009 025 20 8458 064 009 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 009 003 20 8458 064 009 027 20 8458 064 009 051
12.0 mm (Y) Straight 32 a loading only 20 8458 064 009 007 20 8458 064 009 031 20 8458 064 009 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 010 001 20 8458 064 010 025 20 8458 064 010 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 010 003 20 8458 064 010 027 20 8458 064 010 051
20.3 mm (Y) Straight 32 a loading only 20 8458 064 010 007 20 8458 064 010 031 20 8458 064 010 055
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8458 064 012 001 20 8458 064 012 025 20 8458 064 012 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 012 003 20 8458 064 012 027 20 8458 064 012 051
17.0 mm Straight 32 a loading only 20 8458 064 012 007 20 8458 064 012 031 20 8458 064 012 055
for 1.6 mm PCB’s 64 a + b fully loaded 20 8458 064 031 001 20 8458 064 031 025 20 8458 064 031 049
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8458 064 031 003 20 8458 064 031 027 20 8458 064 031 051
3.0 mm (Y) Straight 32 a loading only 20 8458 064 031 007 20 8458 064 031 031 20 8458 064 031 055

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #220. Visit our website http://www.avxcorp.com

220 ELCO
DIN 41612 Connectors
Series 8458 – Male Style 1⁄3 C Press-Fit - 3 Rows (3 x 10) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
030 3 (3 x 10) 9 0.900 1.158 1.300 1.497
(22.86) (29.41) (33.02) (38.02)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8458 030 001 001 10 8458 030 001 025 10 8458 030 001 049
5.3 mm (Y) (0.6” x 0.6”) 20 a + c fully loaded 10 8458 030 001 002 10 8458 030 001 026 10 8458 030 001 050
Right Angled 28 + 2 fully loaded + ground 10 8458 030 101 001 10 8458 030 101 025 10 8458 030 101 049
for 1.6 mm PCB’s 30 a + b + c fully loaded 10 8458 030 031 001 10 8458 030 031 025 10 8458 030 031 049
3.0 mm (Y) (0.6” x 0.6”) 20 a + c fully loaded 10 8458 030 031 002 10 8458 030 031 026 10 8458 030 031 050
Right Angled 28 + 2 fully loaded + ground 10 8458 030 131 001 10 8458 030 131 025 10 8458 030 131 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #221. Visit our website http://www.avxcorp.com

ELCO 221
DIN 41612 Connectors
Series 8458 – Female Style 1⁄3 C Press-Fit - 3 Rows (3 x 10) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
030 3 (3 x 10) 9 0.900 1.563 1.368 1.144
(22.86) (39.70) (34.75) (29.06)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 001 001 20 8458 030 001 025 20 8458 030 001 049
5.3 mm (Y) Straight 20 a + c fully loaded 20 8458 030 001 002 20 8458 030 001 026 20 8458 030 001 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 002 001 20 8458 030 002 025 20 8458 030 002 049
9.3 mm (Y) Straight 20 a + c fully loaded 20 8458 030 002 002 20 8458 030 002 026 20 8458 030 002 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 003 001 20 8458 030 003 025 20 8458 030 003 049
16.2 mm (Y) Straight 20 a + c fully loaded 20 8458 030 003 002 20 8458 030 003 026 20 8458 030 003 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 004 001 20 8458 030 004 025 20 8458 030 004 049
23.2 mm (Y) Straight 20 a + c fully loaded 20 8458 030 004 002 20 8458 030 004 026 20 8458 030 004 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 005 001 20 8458 030 005 025 20 8458 030 005 049
13.2 mm (Y) Straight 20 a + c fully loaded 20 8458 030 005 002 20 8458 030 005 026 20 8458 030 005 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 009 001 20 8458 030 009 025 20 8458 030 009 049
12.0 mm (Y) Straight 20 a + c fully loaded 20 8458 030 009 002 20 8458 030 009 026 20 8458 030 009 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 010 001 20 8458 030 010 025 20 8458 030 010 049
20.3 mm (Y) Straight 20 a + c fully loaded 20 8458 030 010 002 20 8458 030 010 026 20 8458 030 010 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 012 001 20 8458 030 012 025 20 8458 030 012 049
17.0 mm (Y) Straight 20 a + c fully loaded 20 8458 030 012 002 20 8458 030 012 026 20 8458 030 012 050
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 20 8458 030 031 001 20 8458 030 031 025 20 8458 030 031 049
3.0 mm (Y) Straight 20 a + c fully loaded 20 8458 030 031 002 20 8458 030 031 026 20 8458 030 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #222. Visit our website http://www.avxcorp.com

222 ELCO
DIN 41612 Connectors
Series 8458 – Male Style 1⁄2 C Press-Fit - 3 Rows (3 x 16) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 15 1.500 1.760 1.900 2.122
(38.10) (44.70) (48.26) (53.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8458 048 001 001 10 8458 048 001 025 10 8458 048 001 049
32 a + c fully loaded 10 8458 048 001 002 10 8458 048 001 026 10 8458 048 001 050
16 a + c even loading 10 8458 048 001 009 10 8458 048 001 033 10 8458 048 001 057
0.6 x 0.6 mm Post Profile 16 a loading only 10 8458 048 001 003 10 8458 048 001 027 10 8458 048 001 051
5.3 mm (Y) Right Angled 46 + 2 fully loaded + ground 10 8458 048 101 001 10 8458 048 101 025 10 8458 048 101 049
for 1.6 mm PCB’s 48 a + b + c fully loaded 10 8458 048 031 001 10 8458 048 031 025 10 8458 048 031 049
32 a + c fully loaded 10 8458 048 031 002 10 8458 048 031 026 10 8458 048 031 050
16 a + c even loading 10 8458 048 031 009 10 8458 048 031 033 10 8458 048 031 057
0.6 x 0.6 mm Post Profile 16 a loading only 10 8458 048 031 003 10 8458 048 031 027 10 8458 048 031 051
3.0 mm (Y) Right Angled 46 + 2 fully loaded + ground 10 8458 048 131 001 10 8458 048 131 025 10 8458 048 131 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #223. Visit our website http://www.avxcorp.com

ELCO 223
DIN 41612 Connectors
Series 8458 – Female Style 1⁄2 C Press-Fit - 3 Rows (3 x 16) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 15 1.500 2.165 1.771 1.748
(38.10) (54.99) (44.99) (44.40)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 001 001 20 8458 048 001 025 20 8458 048 001 049
5.3 mm (Y) Straight 32 a + c fully loaded 20 8458 048 001 002 20 8458 048 001 026 20 8458 048 001 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 002 001 20 8458 048 002 025 20 8458 048 002 049
9.3 mm (Y) Straight 32 a + c fully loaded 20 8458 048 002 002 20 8458 048 002 026 20 8458 048 002 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 003 001 20 8458 048 003 025 20 8458 048 003 049
16.2 mm (Y) Straight 32 a + c fully loaded 20 8458 048 003 002 20 8458 048 003 026 20 8458 048 003 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 004 001 20 8458 048 004 025 20 8458 048 004 049
23.2 mm (Y) Straight 32 a + c fully loaded 20 8458 048 004 002 20 8458 048 004 026 20 8458 048 004 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 005 001 20 8458 048 005 025 20 8458 048 005 049
13.2 mm (Y) Straight 32 a + c fully loaded 20 8458 048 005 002 20 8458 048 005 026 20 8458 048 005 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 009 001 20 8458 048 009 025 20 8458 048 009 049
12.0 mm (Y) Straight 32 a + c fully loaded 20 8458 048 009 002 20 8458 048 009 026 20 8458 048 009 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 010 001 20 8458 048 010 025 20 8458 048 010 049
20.3 mm (Y) Straight 32 a + c fully loaded 20 8458 048 010 002 20 8458 048 010 026 20 8458 048 010 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 012 001 20 8458 048 012 025 20 8458 048 012 049
17.0 mm (Y) Straight 32 a + c fully loaded 20 8458 048 012 002 20 8458 048 012 026 20 8458 048 012 050
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8458 048 031 001 20 8458 048 031 025 20 8458 048 031 049
3.0 mm (Y) Straight 32 a + c fully loaded 20 8458 048 031 002 20 8458 048 031 026 20 8458 048 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #224. Visit our website http://www.avxcorp.com

224 ELCO
DIN 41612 Connectors
Series 8458 – Male Style C Press-Fit - 3 Rows (3 x 32) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.358 3.500 3.697
(78.74) (85.29) (88.90) (93.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8458 096 001 001 10 8458 096 001 025 10 8458 096 001 049
64 a + c fully loaded 10 8458 096 001 002 10 8458 096 001 026 10 8458 096 001 050
32 a + c even loading 10 8458 096 001 009 10 8458 096 001 033 10 8458 096 001 057
0.6 x 0.6 mm Post Profile 32 a loading only 10 8458 096 001 003 10 8458 096 001 027 10 8458 096 001 051
5.3 mm (Y) Right Angled 94 + 2 fully loaded + ground 10 8458 096 101 001 10 8458 096 101 025 10 8458 096 101 049
for 1.6 mm PCB’s 96 a + b + c fully loaded 10 8458 096 031 001 10 8458 096 031 025 10 8458 096 031 049
64 a + c fully loaded 10 8458 096 031 002 10 8458 096 031 026 10 8458 096 031 050
32 a + c even loading 10 8458 096 031 009 10 8458 096 031 033 10 8458 096 031 057
0.6 x 0.6 mm Post Profile 32 a loading only 10 8458 096 031 003 10 8458 096 031 027 10 8458 096 031 051
5.3 mm (Y) Right Angled 94 + 2 fully loaded + ground 10 8458 096 131 001 10 8458 096 131 025 10 8458 096 131 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #225. Visit our website http://www.avxcorp.com

ELCO 225
DIN 41612 Connectors
Series 8458 – Female Style C Press-Fit - 3 Rows (3 x 32) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.740 3.543 3.346
(78.74) (95.00) (89.99) (84.99)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 001 001 20 8458 096 001 025 20 8458 096 001 049
5.3 mm (Y) Straight 64 a + c fully loaded 20 8458 096 001 002 20 8458 096 001 026 20 8458 096 001 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 002 001 20 8458 096 002 025 20 8458 096 002 049
9.3 mm (Y) Straight 64 a + c fully loaded 20 8458 096 002 002 20 8458 096 002 026 20 8458 096 002 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 003 001 20 8458 096 003 025 20 8458 096 003 049
16.2 mm (Y) Straight 64 a + c fully loaded 20 8458 096 003 002 20 8458 096 003 026 20 8458 096 003 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 004 001 20 8458 096 004 025 20 8458 096 004 049
23.2 mm (Y) Straight 64 a + c fully loaded 20 8458 096 004 002 20 8458 096 004 026 20 8458 096 004 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 005 001 20 8458 096 005 025 20 8458 096 005 049
13.2 mm (Y) Straight 64 a + c fully loaded 20 8458 096 005 002 20 8458 096 005 026 20 8458 096 005 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 009 001 20 8458 096 009 025 20 8458 096 009 049
12.0 mm (Y) Straight 64 a + c fully loaded 20 8458 096 009 002 20 8458 096 009 026 20 8458 096 009 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 010 001 20 8458 096 010 025 20 8458 096 010 049
20.3 mm (Y) Straight 64 a + c fully loaded 20 8458 096 010 002 20 8458 096 010 026 20 8458 096 010 050
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 012 001 20 8458 096 012 025 20 8458 096 012 049
17.0 mm (Y) Straight 64 a + c fully loaded 20 8458 096 012 002 20 8458 096 012 026 20 8458 096 012 050
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 96 a + b + c fully loaded 20 8458 096 031 001 20 8458 096 031 025 20 8458 096 031 049
3.0 mm (Y) Straight 64 a + c fully loaded 20 8458 096 031 002 20 8458 096 031 026 20 8458 096 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #226. Visit our website http://www.avxcorp.com

226 ELCO
DIN 41612 Connectors
Series 8458 – Female Style C Expanded Press-Fit -
4 Rows (4 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
128 4 (4 x 32) 31 3.100 3.740 3.543 3.346 0.433 0.516
(78.74) (95.00) (90.00) (85.00) (11.00) (13.10)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 001 001 20 8458 128 001 025 20 8458 128 001 049
6.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 002 001 20 8458 128 002 025 20 8458 128 002 049
9.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 003 001 20 8458 128 003 025 20 8458 128 003 049
16.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 004 001 20 8458 128 004 025 20 8458 128 004 049
23.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 005 001 20 8458 128 005 025 20 8458 128 005 049
13.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 009 001 20 8458 128 009 025 20 8458 128 009 049
12.0 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 010 001 20 8458 128 010 025 20 8458 128 010 049
20.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 012 001 20 8458 128 012 025 20 8458 128 012 049
17.0 mm (Y) Straight
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8458 128 031 001 20 8458 128 031 025 20 8458 128 031 049
3.0 mm (Y) Straight

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #227. Visit our website http://www.avxcorp.com

ELCO 227
DIN 41612 Connectors
Series 8458 – Female Style C Expanded Press-Fit -
5 Rows (5 x 32) - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
160 5 (5 x 32) 31 3.100 3.740 3.543 3.346 0.433 0.516
(78.74) (95.00) (90.00) (85.00) (11.00) (13.10)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 001 002 20 8458 160 001 026 20 8458 160 001 050
6.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 002 002 20 8458 160 002 026 20 8458 160 002 050
9.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 003 002 20 8458 160 003 026 20 8458 160 003 050
16.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 004 002 20 8458 160 004 026 20 8458 160 004 050
23.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 005 002 20 8458 160 005 026 20 8458 160 005 050
13.2 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 009 002 20 8458 160 009 026 20 8458 160 009 050
12.0 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 010 002 20 8458 160 010 026 20 8458 160 010 050
20.3 mm (Y) Straight
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 012 002 20 8458 160 012 026 20 8458 160 012 050
17.0 mm (Y) Straight
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8458 160 031 001 20 8458 160 031 025 20 8458 160 031 049
3.0 mm (Y) Straight

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #228. Visit our website http://www.avxcorp.com

228 ELCO
DIN 41612 Connectors
Series 8485 – Style M Contacts – Special Contacts for
Style M Connectors

High Power Receptacle Contact for Receptacle Series 8484

Variation Termination [A* Performance Ordering Code

Screw f3M .114 (2.90) for 40 Ampere max. 70 8485 02 14 00 343

.118 (3.00)
PCB hole

Press-Fit Note: set 40 Ampere max. 70 8485 03 14 00 343

PCB hole
spec

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #229. Visit our website http://www.avxcorp.com

ELCO 229
DIN 41612 Connectors
Series 8484 – Female Style 1⁄2 M Press-Fit -
3 Rows (3 x 4, 10) - .100 Pitch
Dimensions

Contact Design Number of Number of Part Number

and Cavities for Cavities for Loading Performance classes according to DIN 41612
Termination Length Signal Special Description III II I
Positions Positions

5.3 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 001 001 20 8484 012 001 025 20 8484 012 001 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 001 001 20 8484 030 001 025 20 8484 030 001 049

9.3 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 002 001 20 8484 012 002 025 20 8484 012 002 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 002 001 20 8484 030 002 025 20 8484 030 002 049

16.2 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 003 001 20 8484 012 003 025 20 8484 012 003 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 003 001 20 8484 030 003 025 20 8484 030 003 049

23.2 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 004 001 20 8484 012 004 025 20 8484 012 004 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 004 001 20 8484 030 004 025 20 8484 030 004 049

13.2 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 005 001 20 8484 012 005 025 20 8484 012 005 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 005 001 20 8484 030 005 025 20 8484 030 005 049

18.2 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 008 001 20 8484 012 008 025 20 8484 012 008 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 008 001 20 8484 030 008 025 20 8484 030 008 049

12.0 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 009 001 20 8484 012 009 025 20 8484 012 009 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 009 001 20 8484 030 009 025 20 8484 030 009 049

20.3 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 010 001 20 8484 012 010 025 20 8484 012 010 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 010 001 20 8484 030 010 025 20 8484 030 010 049
Special storch leg
18.7 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 011 001 20 8484 012 011 025 20 8484 012 011 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 011 001 20 8484 030 011 025 20 8484 030 011 049

17.0 mm (Y) 12 (3 x 4) 4 a + b + c fully loaded 20 8484 012 012 001 20 8484 012 012 025 20 8484 012 012 049
Straight 30 (3 x 10) 2 a + b + c fully loaded 20 8484 030 012 001 20 8484 030 012 025 20 8484 030 012 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #230. Visit our website http://www.avxcorp.com

230 ELCO
DIN 41612 Connectors
Series 8484 – Female Style M Press-Fit -
3 Rows (3 x 2, 8, 14, 20 or 28) - .100 Pitch
Dimensions

Contact Design Number of Number of Part Number

and Cavities for Cavities for Loading Performance classes according to DIN 41612
Termination Length Signal Positions Special Positions Description III II I
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 001 001 20 8484 006 001 025 20 8484 006 001 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 001 001 20 8484 024 001 025 20 8484 024 001 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 001 001 20 8484 042 001 025 20 8484 042 001 049
5.3 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 001 001 20 8484 060 001 025 20 8484 060 001 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 001 001 20 8484 078 001 025 20 8484 078 001 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 002 001 20 8484 006 002 025 20 8484 006 002 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 002 001 20 8484 024 002 025 20 8484 024 002 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 002 001 20 8484 042 002 025 20 8484 042 002 049
9.3 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 002 001 20 8484 060 002 025 20 8484 060 002 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 002 001 20 8484 078 002 025 20 8484 078 002 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 003 001 20 8484 006 003 025 20 8484 006 003 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 003 001 20 8484 024 003 025 20 8484 024 003 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 003 001 20 8484 042 003 025 20 8484 042 003 049
16.2 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 003 001 20 8484 060 003 025 20 8484 060 003 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 003 001 20 8484 078 003 025 20 8484 078 003 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 004 001 20 8484 006 004 025 20 8484 006 004 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 004 001 20 8484 024 004 025 20 8484 024 004 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 004 001 20 8484 042 004 025 20 8484 042 004 049
23.2 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 004 001 20 8484 060 004 025 20 8484 060 004 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 004 001 20 8484 078 004 025 20 8484 078 004 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 005 001 20 8484 006 005 025 20 8484 006 005 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 005 001 20 8484 024 005 025 20 8484 024 005 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 005 001 20 8484 042 005 025 20 8484 042 005 049
13.2 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 005 001 20 8484 060 005 025 20 8484 060 005 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 005 001 20 8484 078 005 025 20 8484 078 005 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 008 001 20 8484 006 008 025 20 8484 006 008 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 008 001 20 8484 024 008 025 20 8484 024 008 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 008 001 20 8484 042 008 025 20 8484 042 008 049
18.2 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 008 001 20 8484 060 008 025 20 8484 060 008 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 008 001 20 8484 078 008 025 20 8484 078 008 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 009 001 20 8484 006 009 025 20 8484 006 009 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 009 001 20 8484 024 009 025 20 8484 024 009 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 009 001 20 8484 042 009 025 20 8484 042 009 049
12.0 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 009 001 20 8484 060 009 025 20 8484 060 009 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 009 001 20 8484 078 009 025 20 8484 078 009 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 010 001 20 8484 006 010 025 20 8484 006 010 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 010 001 20 8484 024 010 025 20 8484 024 010 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 010 001 20 8484 042 010 025 20 8484 042 010 049
20.3 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 010 001 20 8484 060 010 025 20 8484 060 010 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 010 001 20 8484 078 010 025 20 8484 078 010 049
Special 6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 011 001 20 8484 006 011 025 20 8484 006 011 049
storch leg 24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 011 001 20 8484 024 011 025 20 8484 024 011 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 011 001 20 8484 042 011 025 20 8484 042 011 049
18.7 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 011 001 20 8484 060 011 025 20 8484 060 011 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 011 001 20 8484 078 011 025 20 8484 078 011 049
6 (3 x 2) 10 a + b + c fully loaded 20 8484 006 012 001 20 8484 006 012 025 20 8484 006 012 049
24 ( 3 x 8) 8 a + b + c fully loaded 20 8484 024 012 001 20 8484 024 012 025 20 8484 024 012 049
42 (3 x 14) 6 a + b + c fully loaded 20 8484 042 012 001 20 8484 042 012 025 20 8484 042 012 049
17.0 mm (Y) 60 (3 x 20) 4 a + b + c fully loaded 20 8484 060 012 001 20 8484 060 012 025 20 8484 060 012 049
Straight 78 (3 x 28) 2 a + b + c fully loaded 20 8484 078 012 001 20 8484 078 012 025 20 8484 078 012 049
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #231.
Visit our website http://www.avxcorp.com

ELCO 231
DIN 41612 Connectors
Series 8478 – Male Style 1⁄2 Q Press-Fit - 2 Rows (2 x 16)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
032 2 (2 x 16) 15 1.500 1.760 1.862 1.968 2.162
(38.10) (44.70) (47.29) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 001 001 10 8478 032 001 025 10 8478 032 001 049
16 a + b even loading 10 8478 032 001 007 10 8478 032 001 031 10 8478 032 001 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 001 003 10 8478 032 001 027 10 8478 032 001 051
5.3 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 101 001 10 8478 032 101 025 10 8478 032 101 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 002 001 10 8478 032 002 025 10 8478 032 002 049
16 a + b even loading 10 8478 032 002 007 10 8478 032 002 031 10 8478 032 002 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 002 003 10 8478 032 002 027 10 8478 032 002 051
9.3 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 102 001 10 8478 032 102 025 10 8478 032 102 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 003 001 10 8478 032 003 025 10 8478 032 003 049
16 a + b even loading 10 8478 032 003 007 10 8478 032 003 031 10 8478 032 003 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 003 003 10 8478 032 003 027 10 8478 032 003 051
16.2 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 103 001 10 8478 032 103 025 10 8478 032 103 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 004 001 10 8478 032 004 025 10 8478 032 004 049
16 a + b even loading 10 8478 032 004 007 10 8478 032 004 031 10 8478 032 004 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 004 003 10 8478 032 004 027 10 8478 032 004 051
18.2 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 104 001 10 8478 032 104 025 10 8478 032 104 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 005 001 10 8478 032 005 025 10 8478 032 005 049
16 a + b even loading 10 8478 032 005 007 10 8478 032 005 031 10 8478 032 005 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 005 003 10 8478 032 005 027 10 8478 032 005 051
14.6 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 105 001 10 8478 032 105 025 10 8478 032 105 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 006 001 10 8478 032 006 025 10 8478 032 006 049
16 a + b even loading 10 8478 032 006 007 10 8478 032 006 031 10 8478 032 006 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 006 003 10 8478 032 006 027 10 8478 032 006 051
13.2 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 106 001 10 8478 032 106 025 10 8478 032 106 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 007 001 10 8478 032 007 025 10 8478 032 007 049
16 a + b even loading 10 8478 032 007 007 10 8478 032 007 031 10 8478 032 007 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 007 003 10 8478 032 007 027 10 8478 032 007 051
23.2 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 107 001 10 8478 032 107 025 10 8478 032 107 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 008 001 10 8478 032 008 025 10 8478 032 008 049
16 a + b even loading 10 8478 032 008 007 10 8478 032 008 031 10 8478 032 008 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 008 003 10 8478 032 008 027 10 8478 032 008 051
20.0 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 108 001 10 8478 032 108 025 10 8478 032 108 049
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 10 8478 032 009 001 10 8478 032 009 025 10 8478 032 009 049
16 a + b even loading 10 8478 032 009 007 10 8478 032 009 031 10 8478 032 009 055
0.6 x 0.6 mm Post Profile 16 a loading only 10 8478 032 009 003 10 8478 032 009 027 10 8478 032 009 051
3.9 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 032 109 001 10 8478 032 109 025 10 8478 032 109 049
for 1.6 mm PCB’s 32 a + b fully loaded 10 8478 032 031 001 10 8478 032 031 025 10 8478 032 031 049
0.6 x 0.6 mm Post Profile 16 a + b even loading 10 8478 032 031 007 10 8478 032 031 031 10 8478 032 031 055
3.0 mm (Y) Straight 16 a loading only 10 8478 032 031 003 10 8478 032 031 027 10 8478 032 031 051

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #232. Visit our website http://www.avxcorp.com

232 ELCO
DIN 41612 Connectors
Series 8478 – Female Style 1⁄2 Q Press-Fit - 2 Rows (2 x 16)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.697 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 32 a + b fully loaded 20 8478 032 001 001 20 8478 032 001 025 20 8478 032 001 049
0.6 x 0.6 mm Post Profile 16 a + b even loading 20 8478 032 001 007 20 8478 032 001 031 20 8478 032 001 055
5.3 mm (Y) Right Angled 16 a loading only 20 8478 032 001 003 20 8478 032 001 027 20 8478 032 001 051
for 1.6 mm PCB’s 32 a + b fully loaded 20 8478 032 031 001 20 8478 032 031 025 20 8478 032 031 049
0.6 x 0.6 mm Post Profile 16 a + b even loading 20 8478 032 031 007 20 8478 032 031 031 20 8478 032 031 055
2.9 mm (Y) Right Angled 16 a loading only 20 8478 032 031 003 20 8478 032 031 027 20 8478 032 031 051

Series 8478 – Female Style Q Press-Fit - 2 Rows (2 x 32) -

Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
064 2 (2 x 32) 31 3.100 3.697 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 20 8478 064 001 001 20 8478 064 001 025 20 8478 064 001 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8478 064 001 007 20 8478 064 001 031 20 8478 064 001 055
5.3 mm (Y) Right Angled 32 a loading only 20 8478 064 001 003 20 8478 064 001 027 20 8478 064 001 051
for 1.6 mm PCB’s 64 a + b fully loaded 20 8478 064 031 001 20 8478 064 031 025 20 8478 064 031 049
0.6 x 0.6 mm Post Profile 32 a + b even loading 20 8478 064 031 007 20 8478 064 031 031 20 8478 064 031 055
2.9 mm (Y) Right Angled 32 a loading only 20 8478 064 031 003 20 8478 064 031 027 20 8478 064 031 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #233.
Visit our website http://www.avxcorp.com

ELCO 233
DIN 41612 Connectors
Series 8478 – Male Style Q Press-Fit - 2 Rows (2 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
064 2 (2 x 32) 31 3.100 3.358 3.461 3.543 3.763
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 001 001 10 8478 064 001 025 10 8478 064 001 049
32 a + b even loading 10 8478 064 001 007 10 8478 064 001 031 10 8478 064 001 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 001 003 10 8478 064 001 027 10 8478 064 001 051
5.3 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 101 001 10 8478 064 101 025 10 8478 064 101 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 002 001 10 8478 064 002 025 10 8478 064 002 049
32 a + b even loading 10 8478 064 002 007 10 8478 064 002 031 10 8478 064 002 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 002 003 10 8478 064 002 027 10 8478 064 002 051
9.3 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 102 001 10 8478 064 102 025 10 8478 064 102 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 003 001 10 8478 064 003 025 10 8478 064 003 049
32 a + b even loading 10 8478 064 003 007 10 8478 064 003 031 10 8478 064 003 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 003 003 10 8478 064 003 027 10 8478 064 003 051
16.2 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 103 001 10 8478 064 103 025 10 8478 064 103 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 004 001 10 8478 064 004 025 10 8478 064 004 049
32 a + b even loading 10 8478 064 004 007 10 8478 064 004 031 10 8478 064 004 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 004 003 10 8478 064 004 027 10 8478 064 004 051
18.2 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 104 001 10 8478 064 104 025 10 8478 064 104 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 005 001 10 8478 064 005 025 10 8478 064 005 049
32 a + b even loading 10 8478 064 005 007 10 8478 064 005 031 10 8478 064 005 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 005 003 10 8478 064 005 027 10 8478 064 005 051
14.6 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 105 001 10 8478 064 105 025 10 8478 064 105 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 006 001 10 8478 064 006 025 10 8478 064 006 049
32 a + b even loading 10 8478 064 006 007 10 8478 064 006 031 10 8478 064 006 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 006 003 10 8478 064 006 027 10 8478 064 006 051
13.2 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 106 001 10 8478 064 106 025 10 8478 064 106 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 007 001 10 8478 064 007 025 10 8478 064 007 049
32 a + b even loading 10 8478 064 007 007 10 8478 064 007 031 10 8478 064 007 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 007 003 10 8478 064 007 027 10 8478 064 007 051
23.2 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 107 001 10 8478 064 107 025 10 8478 064 107 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 008 001 10 8478 064 008 025 10 8478 064 008 049
32 a + b even loading 10 8478 064 008 007 10 8478 064 008 031 10 8478 064 008 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 008 003 10 8478 064 008 027 10 8478 064 008 051
20.0 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 108 001 10 8478 064 108 025 10 8478 064 108 049
for ≥ 2.4 mm PCB’s 64 a + b fully loaded 10 8478 064 009 001 10 8478 064 009 025 10 8478 064 009 049
32 a + b even loading 10 8478 064 009 007 10 8478 064 009 031 10 8478 064 009 055
0.6 x 0.6 mm Post Profile 32 a loading only 10 8478 064 009 003 10 8478 064 009 027 10 8478 064 009 051
3.9 mm (Y) Straight 62 + 2 fully loaded + ground 10 8478 064 109 001 10 8478 064 109 025 10 8478 064 109 049
for 1.6 mm PCB’s 64 a + b fully loaded 10 8478 064 031 001 10 8478 064 031 025 10 8478 064 031 049
32 a + b even loading 10 8478 064 031 007 10 8478 064 031 031 10 8478 064 031 055
0.6 x 0.6 Post Profile 32 a loading only 10 8478 064 031 003 10 8478 064 031 027 10 8478 064 031 051
3.0 mm (Y) Straight 30 + 2 fully loaded + ground 10 8478 064 131 001 10 8478 064 131 025 10 8478 064 131 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #234. Visit our website http://www.avxcorp.com

234 ELCO
DIN 41612 Connectors
Series 8478 – Male Style 1⁄3 R Press-Fit - 3 Rows (3 x 10)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
030 3 (3 x 10) 9 0.900 1.159 1.265 1.368 1.565
(22.86) (29.44) (32.12) (34.76) (39.76)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 001 001 10 8478 030 001 025 10 8478 030 001 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 001 002 10 8478 030 001 026 10 8478 030 001 050
5.3 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 101 001 10 8478 030 101 025 10 8478 030 101 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 002 001 10 8478 030 002 025 10 8478 030 002 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 002 002 10 8478 030 002 026 10 8478 030 002 050
9.3 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 102 001 10 8478 030 102 025 10 8478 030 102 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 003 001 10 8478 030 003 025 10 8478 030 003 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 003 002 10 8478 030 003 026 10 8478 030 003 050
16.2 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 103 001 10 8478 030 103 025 10 8478 030 103 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 004 001 10 8478 030 004 025 10 8478 030 004 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 004 002 10 8478 030 004 026 10 8478 030 004 050
18.2 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 104 001 10 8478 030 104 025 10 8478 030 104 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 005 001 10 8478 030 005 025 10 8478 030 005 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 005 002 10 8478 030 005 026 10 8478 030 005 050
14.6 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 105 001 10 8478 030 105 025 10 8478 030 105 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 006 001 10 8478 030 006 025 10 8478 030 006 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 006 002 10 8478 030 006 026 10 8478 030 006 050
13.2 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 106 001 10 8478 030 106 025 10 8478 030 106 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 007 001 10 8478 030 007 026 10 8478 030 007 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 007 002 10 8478 030 007 026 10 8478 030 007 050
23.2 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 107 001 10 8478 030 107 025 10 8478 030 107 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 008 001 10 8478 030 008 025 10 8478 030 008 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 008 002 10 8478 030 008 026 10 8478 030 008 050
20.0 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 108 001 10 8478 030 108 025 10 8478 030 108 049
for ≥ 2.4 mm PCB’s 30 a + b + c fully loaded 10 8478 030 009 001 10 8478 030 009 025 10 8478 030 009 049
0.6 x 0.6 mm Post Profile 20 a + c fully loaded 10 8478 030 009 002 10 8478 030 009 026 10 8478 030 009 050
3.9 mm (Y) Straight 28 + 2 fully loaded + ground 10 8478 030 109 001 10 8478 030 109 025 10 8478 030 109 049
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 30 a + b + c fully loaded 10 8478 030 031 001 10 8478 030 031 025 10 8478 030 031 049
3.0 mm (Y) Straight 20 a + c fully loaded 10 8478 030 031 002 10 8478 030 031 026 10 8478 030 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #235. Visit our website http://www.avxcorp.com

ELCO 235
DIN 41612 Connectors
Series 8478 – Male Style 1⁄2 R Press-Fit - 3 Rows (3 x 16)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
048 3 (3 x 16) 15 1.500 1.760 1.862 1.968 2.162
(38.10) (44.70) (47.29) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 001 001 10 8478 048 001 025 10 8478 048 001 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 001 002 10 8478 048 001 026 10 8478 048 001 050
5.3 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 101 001 10 8478 048 101 025 10 8478 048 101 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 002 001 10 8478 048 002 025 10 8478 048 002 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 002 002 10 8478 048 002 026 10 8478 048 002 050
9.3 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 102 001 10 8478 048 102 025 10 8478 048 102 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 003 001 10 8478 048 003 025 10 8478 048 003 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 003 002 10 8478 048 003 026 10 8478 048 003 050
16.2 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 103 001 10 8478 048 103 025 10 8478 048 103 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 004 001 10 8478 048 004 025 10 8478 048 004 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 004 002 10 8478 048 004 026 10 8478 048 004 050
18.2 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 104 001 10 8478 048 104 025 10 8478 048 104 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 005 001 10 8478 048 005 025 10 8478 048 005 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 005 002 10 8478 048 005 026 10 8478 048 005 050
14.6 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 105 001 10 8478 048 105 025 10 8478 048 105 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 006 001 10 8478 048 006 025 10 8478 048 006 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 006 002 10 8478 048 006 026 10 8478 048 006 050
13.2 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 106 001 10 8478 048 106 025 10 8478 048 106 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 007 001 10 8478 048 007 026 10 8478 048 007 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 007 002 10 8478 048 007 026 10 8478 048 007 050
23.2 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 107 001 10 8478 048 107 025 10 8478 048 107 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 008 001 10 8478 048 008 025 10 8478 048 008 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 008 002 10 8478 048 008 026 10 8478 048 008 050
20.0 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 108 001 10 8478 048 108 025 10 8478 048 108 049
for ≥ 2.4 mm PCB’s 48 a + b + c fully loaded 10 8478 048 009 001 10 8478 048 009 025 10 8478 048 009 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 10 8478 048 009 002 10 8478 048 009 026 10 8478 048 009 050
3.9 mm (Y) Straight 46 + 2 fully loaded + ground 10 8478 048 109 001 10 8478 048 109 025 10 8478 048 109 049
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 10 8478 048 031 001 10 8478 048 031 025 10 8478 048 031 049
3.0 mm (Y) Straight 32 a + c fully loaded 10 8478 048 031 002 10 8478 048 031 026 10 8478 048 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #236. Visit our website http://www.avxcorp.com

236 ELCO
DIN 41612 Connectors
Series 8478 – Female Style 1⁄2 R Press-Fit - 3 Rows (3 x 16)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
048 3 (3 x 16) 31 1.500 2.122 1.900 1.744
(38.10) (53.90) (48.26) (44.30)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8478 048 001 001 20 8478 048 001 025 20 8478 048 001 049
5.3 mm (Y) Right Angled 32 a + c fully loaded 20 8478 048 001 002 20 8478 048 001 026 20 8478 048 001 050
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 48 a + b + c fully loaded 20 8478 048 031 001 20 8478 048 031 025 20 8478 048 031 049
2.9 mm (Y) Right Angled 32 a + c fully loaded 20 8478 048 031 002 20 8478 048 031 026 20 8478 048 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #237. Visit our website http://www.avxcorp.com

ELCO 237
DIN 41612 Connectors
Series 8478 – Male Style R Press-Fit - 3 Rows (3 x 32)
Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
096 3 (3 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 001 001 10 8478 096 001 025 10 8478 096 001 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 001 002 10 8478 096 001 026 10 8478 096 001 050
5.3 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 101 001 10 8478 096 101 025 10 8478 096 101 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 002 001 10 8478 096 002 025 10 8478 096 002 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 002 002 10 8478 096 002 026 10 8478 096 002 050
9.3 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 102 001 10 8478 096 102 025 10 8478 096 102 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 003 001 10 8478 096 003 025 10 8478 096 003 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 003 002 10 8478 096 003 026 10 8478 096 003 050
16.2 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 103 001 10 8478 096 103 025 10 8478 096 103 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 004 001 10 8478 096 004 025 10 8478 096 004 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 004 002 10 8478 096 004 026 10 8478 096 004 050
18.2 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 104 001 10 8478 096 104 025 10 8478 096 104 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 005 001 10 8478 096 005 025 10 8478 096 005 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 005 002 10 8478 096 005 026 10 8478 096 005 050
14.6 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 105 001 10 8478 096 105 025 10 8478 096 105 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 006 001 10 8478 096 006 025 10 8478 096 006 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 006 002 10 8478 096 006 026 10 8478 096 006 050
13.2 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 106 001 10 8478 096 106 025 10 8478 096 106 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 007 001 10 8478 096 007 026 10 8478 096 007 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 007 002 10 8478 096 007 026 10 8478 096 007 050
23.2 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 107 001 10 8478 096 107 025 10 8478 096 107 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 008 001 10 8478 096 008 025 10 8478 096 008 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 008 002 10 8478 096 008 026 10 8478 096 008 050
20.0 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 108 001 10 8478 096 108 025 10 8478 096 108 049
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 10 8478 096 009 001 10 8478 096 009 025 10 8478 096 009 049
0.6 x 0.6 mm Post Profile 64 a + c fully loaded 10 8478 096 009 002 10 8478 096 009 026 10 8478 096 009 050
3.9 mm (Y) Straight 94 + 2 fully loaded + ground 10 8478 096 109 001 10 8478 096 109 025 10 8478 096 109 049
for 1.6 mm PCB’s
0.6 x 0.6 Post Profile 96 a + b + c fully loaded 10 8478 096 031 001 10 8478 096 031 025 10 8478 096 031 049
3.0 mm (Y) Straight 64 a + c fully loaded 10 8478 096 031 002 10 8478 096 031 026 10 8478 096 031 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #238. Visit our website http://www.avxcorp.com

238 ELCO
DIN 41612 Connectors
Series 8478 – Female Style R Press-Fit - 3 Rows (3 x 32)
Inverted - .100 Pitch

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
096 3 (3 x 32) 31 3.100 3.697 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s 96 a + b + c fully loaded 20 8478 096 001 001 20 8478 096 001 025 20 8478 096 001 049
64 a + c fully loaded 20 8478 096 001 002 20 8478 096 001 026 20 8478 096 001 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8478 096 001 009 20 8478 096 001 033 20 8478 096 001 057
5.3 mm Right Angled 32 a loading only 20 8478 096 001 003 20 8478 096 001 027 20 8478 096 001 051
for 1.6 mm PCB’s 96 a + b + c fully loaded 20 8478 096 031 001 20 8478 096 031 025 20 8478 096 031 049
64 a + c fully loaded 20 8478 096 031 002 20 8478 096 031 026 20 8478 096 031 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8478 096 031 009 20 8478 096 031 033 20 8478 096 031 057
2.9 mm Right Angled 32 a loading only 20 8478 096 031 003 20 8478 096 031 027 20 8478 096 031 051

Series 8478 – Female Style R Expanded Press-Fit -

3 Rows (3 x 50) Inverted - .100 Pitch

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
150 3 (3 x 50) 49 4.90 5.50 5.30 5.145
(124.46) (139.70) (134.62) (130.70)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8478 150 001 001 20 8478 150 001 025 20 8478 150 001 049
5.3 mm (Y) Right Angled 100 a + c fully loaded 20 8478 150 001 002 20 8478 150 001 026 20 8478 150 001 050
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8478 150 031 001 20 8478 150 031 025 20 8478 150 031 049
5.3 mm (Y) Right Angled 100 a + c fully loaded 20 8478 150 031 002 20 8478 150 031 026 20 8478 150 031 050
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #239. Visit our website http://www.avxcorp.com

ELCO 239
DIN 41612 Connectors
Series 8478 – Male Style R Expanded Press-Fit -
4 Rows (4 x 32) Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
128 4 (4 x 32) 0.535 0.444 3.358 3.460 3.539 3.736
(13.60) (11.28) (85.29) (87.88) (89.90) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 001 001 10 8478 128 001 025 10 8478 128 001 049
5.3 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 101 001 10 8478 128 101 025 10 8478 128 101 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 002 001 10 8478 128 002 025 10 8478 128 002 049
9.3 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 102 001 10 8478 128 102 025 10 8478 128 102 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 003 001 10 8478 128 003 025 10 8478 128 003 049
16.2 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 103 001 10 8478 128 103 025 10 8478 128 103 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 004 001 10 8478 128 004 025 10 8478 128 004 049
18.2 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 104 001 10 8478 128 104 025 10 8478 128 104 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 005 001 10 8478 128 005 025 10 8478 128 005 049
14.6 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 105 001 10 8478 128 105 025 10 8478 128 105 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 006 001 10 8478 128 006 025 10 8478 128 006 049
13.2 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 106 001 10 8478 128 106 025 10 8478 128 106 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 007 001 10 8478 128 007 025 10 8478 128 007 049
23.2 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 107 001 10 8478 128 107 025 10 8478 128 107 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 008 001 10 8478 128 008 025 10 8478 128 008 049
20.0 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 108 001 10 8478 128 108 025 10 8478 128 108 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 10 8478 128 009 001 10 8478 128 009 025 10 8478 128 009 049
3.9 mm (Y) Straight 126 + 2 fully loaded + ground 10 8478 128 109 001 10 8478 128 109 025 10 8478 128 109 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #240. Visit our website http://www.avxcorp.com

240 ELCO
DIN 41612 Connectors
Series 8478 – Female Style R Expanded Press-Fit -
4 Rows (4 x 32) Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
128 4 (4 x 32) 31 3.100 3.697 3.500 3.343
(78.74) (93.90) (88.90) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8478 128 001 001 20 8478 128 001 025 20 8478 128 001 049
5.3 mm (Y) Right Angled
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 128 a + b + c + d fully loaded 20 8478 128 031 001 20 8478 128 031 025 20 8478 128 031 049
5.3 mm (Y) Right Angled

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #241. Visit our website http://www.avxcorp.com

ELCO 241
DIN 41612 Connectors
Series 8478 – Male Style R Expanded Press-Fit -
5 Rows (5 x 32) Inverted - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E F
Positions Rows
160 5 (5 x 32) 0.638 0.543 3.358 3.460 3.539 3.736
(16.20) (13.80) (85.29) (87.88) (89.90) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 001 001 10 8478 160 001 025 10 8478 160 001 049
5.3 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 101 001 10 8478 160 101 025 10 8478 160 101 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 002 001 10 8478 160 002 025 10 8478 160 002 049
9.3 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 102 001 10 8478 160 102 025 10 8478 160 102 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 003 001 10 8478 160 003 025 10 8478 160 003 049
16.2 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 103 001 10 8478 160 103 025 10 8478 160 103 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 004 001 10 8478 160 004 025 10 8478 160 004 049
18.2 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 104 001 10 8478 160 104 025 10 8478 160 104 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 005 001 10 8478 160 005 025 10 8478 160 005 049
14.6 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 105 001 10 8478 160 105 025 10 8478 160 105 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 006 001 10 8478 160 006 025 10 8478 160 006 049
13.2 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 106 001 10 8478 160 106 025 10 8478 160 106 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 007 001 10 8478 160 007 025 10 8478 160 007 049
23.2 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 107 001 10 8478 160 107 025 10 8478 160 107 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 008 001 10 8478 160 008 025 10 8478 160 008 049
20.0 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 108 001 10 8478 160 108 025 10 8478 160 108 049
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 10 8478 160 009 001 10 8478 160 009 025 10 8478 160 009 049
3.9 mm (Y) Straight 158 + 2 fully loaded + ground 10 8478 160 109 001 10 8478 160 109 025 10 8478 160 109 049

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #242. Visit our website http://www.avxcorp.com

242 ELCO
DIN 41612 Connectors
Series 8478 – Female Style R Expanded Press-Fit -
5 Rows (5 x 32) Inverted - .100 Pitch

Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E
160 5 (5 x 32) 31 3.100 3.700 3.500 3.346
(78.74) (94.00) (88.90) (85.00)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
for ≥ 2.4 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8478 160 001 001 20 8478 160 001 025 20 8478 160 001 049
5.3 mm (Y) Right Angled
for 1.6 mm PCB’s
0.6 x 0.6 mm Post Profile 160 a + b + c + d + e fully loaded 20 8478 160 031 001 20 8478 160 031 025 20 8478 160 031 049
2.9 mm (Y) Right Angled

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #243. Visit our website http://www.avxcorp.com

ELCO 243
DIN 41612 Connectors
Series 8557 – Male Style 1⁄2 C High Temperature -
3 Rows (3 x 16) - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E
Positions Rows
048 3 (3 x 16) 15 1.500 1.760 1.900 2.122
(38.10) (44.70) (48.26) (53.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 10 8557 048 001 001 10 8557 048 001 025 10 8557 048 001 049
3.4 mm (Y) 32 a + c fully loaded 10 8557 048 001 002 10 8557 048 001 026 10 8557 048 001 050
Straight 16 a loading only 10 8557 048 001 003 10 8557 048 001 027 10 8557 048 001 051
48 a + b + c fully loaded 10 8557 048 002 001 10 8557 048 002 025 10 8557 048 002 049
32 a + c fully loaded 10 8557 048 002 002 10 8557 048 002 026 10 8557 048 002 050
3.0 mm (Y) 16 a loading only 10 8557 048 002 003 10 8557 048 002 027 10 8557 048 002 051
Right Angled 46 + 2 fully loaded + ground 10 8557 048 102 001 10 8557 048 102 025 10 8557 048 102 049
48 a + b + c fully loaded 10 8557 048 008 001 10 8557 048 008 025 10 8557 048 008 049
2.3 mm (Y) 32 a + c fully loaded 10 8557 048 008 002 10 8557 048 008 026 10 8557 048 008 050
Right Angled 16 a loading only 10 8557 048 008 003 10 8557 048 008 027 10 8557 048 008 051

Series 8557 – Female Style 1⁄2 C High Temperature -

3 Rows (3 x 16) - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E
Positions Rows
048 3 (3 x 16) 15 1.500 1.969 2.161 1.744
(38.10) (50.01) (54.89) (44.30)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 20 8557 048 001 001 20 8557 048 001 025 20 8557 048 001 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8557 048 001 002 20 8557 048 001 026 20 8557 048 001 050
4.5 mm (Y) Straight 16 a loading only 20 8557 048 001 003 20 8557 048 001 027 20 8557 048 001 051
48 a + b + c fully loaded 20 8557 048 002 001 20 8557 048 002 025 20 8557 048 002 049
0.6 x 0.6 mm Post Profile 32 a + c fully loaded 20 8557 048 002 002 20 8557 048 002 026 20 8557 048 002 050
2.9 mm (Y) Straight 16 a loading only 20 8557 048 002 003 20 8557 048 002 027 20 8557 048 002 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #244.
Visit our website http://www.avxcorp.com

244 ELCO
DIN 41612 Connectors
Series 8557 – Male Style C High Temperature -
3 Rows (3 x 32) - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E
Positions Rows
096 3 (3 x 32) 31 3.100 3.358 3.500 3.697
(78.74) (85.29) (88.90) (93.90)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 10 8557 096 001 001 10 8557 096 001 025 10 8557 096 001 049
64 a + c fully loaded 10 8557 096 001 002 10 8557 096 001 026 10 8557 096 001 050
3.4 mm (Y) 32 a + c even loading 10 8557 096 001 009 10 8557 096 001 033 10 8557 096 001 057
Straight 32 a loading only 10 8557 096 001 003 10 8557 096 001 027 10 8557 096 001 051
96 a + b + c fully loaded 10 8557 096 002 001 10 8557 096 002 025 10 8557 096 002 049
64 a + c fully loaded 10 8557 096 002 002 10 8557 096 002 026 10 8557 096 002 050
32 a + c even loading 10 8557 096 002 009 10 8557 096 002 033 10 8557 096 002 057
3.0 mm (Y) 32 a loading only 10 8557 096 002 003 10 8557 096 002 027 10 8557 096 002 051
Right Angled 94 + 2 fully loaded + ground 10 8557 096 101 001 10 8557 096 101 025 10 8557 096 101 049
96 a + b + c fully loaded 10 8557 096 008 001 10 8557 096 008 025 10 8557 096 008 049
64 a + c fully loaded 10 8557 096 008 002 10 8557 096 008 026 10 8557 096 008 050
2.3 mm (Y) 32 a + c even loading 10 8557 096 008 009 10 8557 096 008 033 10 8557 096 008 057
Right Angled 32 a loading only 10 8557 096 008 003 10 8557 096 008 027 10 8557 096 008 051

Series 8557 – Female Style C High Temperature -

3 Rows (3 x 32) - .100 Pitch
Dimensions

Inches (mm)
No.
Contact Contact A B C D E
Positions Rows
096 3 (3 x 32) 31 3.100 3.543 3.736 3.343
(78.74) (89.99) (94.89) (84.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 20 8557 096 001 001 20 8557 096 001 025 20 8557 096 001 049
64 a + c fully loaded 20 8557 096 001 002 20 8557 096 001 026 20 8557 096 001 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8557 096 001 009 20 8557 096 001 033 20 8557 096 001 057
4.5 mm (Y) Straight 32 a loading only 20 8557 096 001 003 20 8557 096 001 027 20 8557 096 001 051
96 a + b + c fully loaded 20 8557 096 002 001 20 8557 096 002 025 20 8557 096 002 049
64 a + c fully loaded 20 8557 096 002 002 20 8557 096 002 026 20 8557 096 002 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8557 096 002 009 20 8557 096 002 033 20 8557 096 002 057
2.9 mm (Y) Straight 32 a loading only 20 8557 096 002 003 20 8557 096 002 027 20 8557 096 002 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #245.
Visit our website http://www.avxcorp.com

ELCO 245
DIN 41612 Connectors
Series 8577 – Male Style 1⁄2 R High Temperature -
3 Rows (3 x 16) Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
048 3 (3 x 16) 15 1.500 1.760 1.862 1.968 2.162
(38.10) (44.70) (47.29) (49.99) (54.91)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 10 8577 048 001 001 10 8577 048 001 025 10 8577 048 001 049
32 a + c fully loaded 10 8577 048 001 002 10 8577 048 001 026 10 8577 048 001 050
16 a + c even loading 10 8577 048 001 009 10 8577 048 001 033 10 8577 048 001 057
2.9 mm (Y) 16 a loading only 10 8577 048 001 003 10 8577 048 001 027 10 8577 048 001 051
Straight 46 + 2 fully loaded + ground 10 9577 048 101 001 10 8577 048 101 025 10 8577 048 101 049
48 a + b + c fully loaded 10 8577 048 002 001 10 8577 048 002 025 10 8577 048 002 049
32 a + c fully loaded 10 8577 048 002 002 10 8577 048 002 026 10 8577 048 002 050
16 a + c even loading 10 8577 048 002 009 10 8577 048 002 033 10 8577 048 002 057
4.5 mm (Y) 16 a loading only 10 8577 048 002 003 10 8577 048 002 027 10 8577 048 002 051
Straight 46 + 2 fully loaded + ground 10 8577 048 102 001 10 8577 048 102 025 10 8577 048 102 049

Series 8577 – Female Style 1⁄2 R High Temperature -

3 Rows (3 x 16) Inverted - .100 Pitch

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
048 3 (3 x 16) 15 1.500 2.122 1.900 1.744 0.334 0.413
(38.10) (53.90) (48.26) (44.30) (8.48) (10.50)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
48 a + b + c fully loaded 20 8577 048 002 001 20 8577 048 002 025 20 8577 048 002 049
32 a + c fully loaded 20 8577 048 002 002 20 8577 048 002 026 20 8577 048 002 050
0.6 x 0.6 mm Post Profile 16 a + c even loading 20 8577 048 002 009 20 8577 048 002 033 20 8577 048 002 057
3.0 mm (Y) Right Angled 16 a loading only 20 8577 048 002 003 20 8577 048 002 027 20 8577 048 002 051
48 a + b + c fully loaded 20 8577 048 006 001 20 8577 048 006 025 20 8577 048 006 049
32 a + c fully loaded 20 8577 048 006 002 20 8577 048 006 026 20 8577 048 006 050
0.3 x 0.79 mm Post Profile 16 a + c even loading 20 8577 048 006 009 20 8577 048 006 033 20 8577 048 006 057
3.0 mm (Y) Right Angled 16 a loading only 20 8577 048 006 003 20 8577 048 006 027 20 8577 048 006 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service. Call 1-800-879-1613 and request document #246.
Visit our website http://www.avxcorp.com

246 ELCO
DIN 41612 Connectors
Series 8577 – Male Style R High Temperature -
3 Rows (3 x 32) Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F
096 3 (3 x 32) 31 3.100 3.358 3.461 3.543 3.736
(78.74) (85.29) (87.91) (89.99) (94.89)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 10 8577 096 001 001 10 8577 096 001 025 10 8577 096 001 049
64 a + c fully loaded 10 8577 096 001 002 10 8577 096 001 026 10 8577 096 001 050
32 a + c even loading 10 8577 096 001 009 10 8577 096 001 033 10 8577 096 001 057
2.9 mm (Y) 32 a loading only 10 8577 096 001 003 10 8577 096 001 027 10 8577 096 001 051
Straight 46 + 2 fully loaded + ground 10 9577 096 101 001 10 8577 096 101 025 10 8577 096 101 049
48 a + b + c fully loaded 10 8577 096 002 001 10 8577 096 002 025 10 8577 096 002 049
32 a + c fully loaded 10 8577 096 002 002 10 8577 096 002 026 10 8577 096 002 050
16 a + c even loading 10 8577 096 002 009 10 8577 096 002 033 10 8577 096 002 057
4.5 mm (Y) 16 a loading only 10 8577 096 002 003 10 8577 096 002 027 10 8577 096 002 051
Straight 46 + 2 fully loaded + ground 10 8577 096 102 001 10 8577 096 102 025 10 8577 096 102 049

Series 8577 – Female Style R High Temperature -

3 Rows (3 x 32) Inverted - .100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D E F G
096 3 (3 x 32) 31 3.100 3.697 3.500 3.343 0.334 0.413
(78.74) (93.90) (88.90) (84.90) (8.48) (10.50)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
96 a + b + c fully loaded 20 8577 096 002 001 20 8577 096 002 025 20 8577 096 002 049
64 a + c fully loaded 20 8577 096 002 002 20 8577 096 002 026 20 8577 096 002 050
0.6 x 0.6 mm Post Profile 32 a + c even loading 20 8577 096 002 009 20 8577 096 002 033 20 8577 096 002 057
3.0 mm (Y) Right Angled 32 a loading only 20 8577 096 002 003 20 8577 096 002 027 20 8577 096 002 051
96 a + b + c fully loaded 20 8577 096 006 001 20 8577 096 006 025 20 8577 096 006 049
64 a + c fully loaded 20 8577 096 006 002 20 8577 096 006 026 20 8577 096 006 050
0.3 x 0.79 mm Post Profile 32 a + c even loading 20 8577 096 006 009 20 8577 096 006 033 20 8577 096 006 057
3.0 mm (Y) Right Angled 32 a loading only 20 8577 096 006 003 20 8577 096 006 027 20 8577 096 006 051
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #247. Visit our website http://www.avxcorp.com

ELCO 247
DIN 41612 Connectors
Series 8459 – Female Style 1⁄2 IDC - 3 Rows (3 x 16) -
.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D F G H
048 3 (3 x 16) 2.161 1.968 0.591 1.500 2.362 1.220 1.550
(54.90) (50.00) (15.00) (38.10) (60.00) (31.00) (39.37)

Number of Part Number

Contact Loading Performance classes according to DIN 41612
Variation Cavities Description III II I
With strain relief 48 a + c fully loaded 20 8459 048 001 002 20 8459 048 001 026 20 8459 048 001 050

Without strain relief 48 a + c fully loaded 20 8459 048 002 002 20 8459 048 002 026 20 8459 048 002 050

Series 8549 – Female Style C IDC - 3 Rows (3 x 32) -

.100 Pitch
Dimensions

Inches (mm)
No. Contact Contact
Positions Rows A B C D F G H
096 3 (3 x 32) 3.736 3.543 1.220 3.100 3.937 2.480 3.150
(94.90) (90.00) (31.00) (78.74) (100.00) (63.00) (80.01)

Number of Part Number

Contact Loading Performance classes according to DIN 41612
Variation Cavities Description III II I

With strain relief 96 a + c fully loaded 20 8459 096 001 002 20 8459 096 001 026 20 8459 096 001 050

Without strain relief 96 a + c fully loaded 20 8459 096 002 002 20 8459 096 002 026 20 8459 096 002 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #248. Visit our website http://www.avxcorp.com

248 ELCO
DIN 41612 Connectors
Series 8577 – Female Style R Expanded High Temperature -
4 Rows (4 x 32) Inverted - .100 Pitch
Dimensions

No. Contact Contact

Positions Rows A B C D E F G
128 4 (4 x 32) 31 3.100 3.697 3.500 3.343 0.437 0.516
(78.74) (93.90) (88.90) (84.90) (11.10) (13.10)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I
0.6 x 0.6 mm Post Profile
3.0 mm (Y) Right Angled 128 a + b + c + d fully loaded 20 8577 128 002 001 20 8577 128 002 025 20 8577 128 002 049

0.6 x 0.6 mm Post Profile

3.0 mm (Y) Right Angled 128 a + b + c + d fully loaded 20 8577 128 006 001 20 8577 128 006 025 20 8577 128 006 049

Series 8577 – Female Style R Expanded High Temperature -

3 Rows (3 x 50) Inverted - .100 Pitch
Dimensions

No. Contact Contact

Positions Rows A B C D E F
150 3 (3 x 50) 49 4.941 5.154 5.260 5.343 5.536
(125.50) (130.90) (133.60) (135.70) (140.60)

Contact Design Number Part Number

and of Loading Performance classes according to DIN 41612
Termination Length Positions Description III II I

0.6 x 0.6 mm Post Profile 150 a + b + c fully loaded 20 8577 150 001 001 20 8577 150 001 025 20 8577 150 001 049
2.8 mm (Y) Right Angled 100 a + c fully loaded 20 8577 150 001 002 20 8577 150 001 026 20 8577 150 001 050

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #249. Visit our website http://www.avxcorp.com

ELCO 249
DIN 41612 Connectors
Series 8464 – Female Style C Crimp - 3 Rows (3 x 32) -
.100 Pitch
Dimensions

Number of Loading Part

Contact Design Positions Description Number
Crimp 96 Insulator without keying 20 8464 096 001 000
96 Insulator with keying 22 8464 096 001 000
Contacts for 8464 on 10K reel 60 8464 0213 99 742
Loose contacts for 8464 60 8464 0213 00 742
Tools Hand tool 06 8464 0101 00 000
Crimping machine including applicator 06 7865 5200 00 000
Insert for hand crimp tool 06 8464 8201 00 000
Extraction tool 06 8464 8101 00 000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #250. Visit our website http://www.avxcorp.com

250 ELCO
Board To Board Connector Overview
Fine Pitch Microleaf Board To Board Connectors
Pitch Series Soldering Direction Position Stack Current Voltage Standard Description
DIP SMT ST/ST ST/RA RA/RA Number Height Rating Rating Packaging
2.54mm 9072 O O 20P~60P 12~20 3A 300V Tray Post and Box Style

1.27mm 5061/5061 O O O O 20P~120P 12~20 0.5A 250V Tray

5072/5061 O 50,80,100P O O O 20P~200P 12~20 0.5A 250V Tray SMT 50,80,100P

H=14mm (st+st only)
1.00mm 5015 O O 64P 8~15 0.5A 250V 250p/Reel Mezzanine card conn
(IEEE1386)
5077 O O 30P~60P 8~12/19/22 0.5A 125V 450,500p/Reel

5078 O O O O 30P~120P 5 0.5A 100V 1Kpcs/Reel, Tray

0.80mm 8375 O O 16/22/28P 3 0.5A 50V 1Kpcs/Reel Gold and Tin Plating

0.50mm 5046 O O 20P~120P 3.5/4.0/4.5 0.4A 50V 1Kpcs/Reel

5047 O O 20P~120P 5.0/6.0/7.0 0.4A 50V 1Kpcs/Reel

5087 O O 20P~100P/140P 2.0/2.5 0.4A 50V 1Kpcs/Reel

One Piece Solo StackerTM Board To Board Connectors

No. of Nominal Stack Height (mm)
Contacts 2.00 2.20 2.40 2.60 3.00 3.20 4.00 5.00
4 way •
16 way •* •* •* •*
18 way •
20 way •* •* •* •*
24 way •* •* •* •*
28 way •* •* •* •* •
30 way •
32 way •
34 way •

*Denotes that part is currently being tooled. Connectors can be supplied with or without location bosses.
All stack height dimensions are nominal. Cells with grey shading denote that part is custom special.
Tolerance varies depending on application. Custom options available.

Torson Style Board To Board Connectors

Part No. Board/Board Part No. Board/Board
Prefix Description Stacking Height mm Prefix Description Stacking Height mm
24-5016 Receptacle: SMT 22-5016 Receptacle: Through-Hole
1.52 4.28
12-5016 Header: Through-Hole 17-5016 Header: SMT
22-5016 Receptacle: Through-Hole 21-5016 Receptacle: SMT
2.21 6.09
15-5016 Header: Pin Carrier 10-5016 Header: Through-Hole
23-5016 Receptacle: SMT 20-5016-2XXX-10 Receptacle: Through-Hole
2.21 6.09
15-5016 Header: Pin Carrier 10-5016 Header: Through-Hole
22-5016 Receptacle: Through-Hole 20-5016-2XXX-10 Receptacle: Through-Hole
3.73 6.73
12-5016 Header: Through-Hole 11-5016 Header: SMT
23-5016 Receptacle: SMT 21-5016 Receptacle: SMT
3.73 6.73
12-5016 Header: Through-Hole 11-5016 Header
23-5016 Receptacle: SMT
4.28
17-5016 Header: SMT

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #251. Visit our website http://www.avxcorp.com

ELCO 251
Board Stacking Connectors 2.54mm Pitch
Series 9072 Plug
ORDERING CODE
00 9072 0XX XXX 8XX
FINISHING CODE
(Gold-Mating Area)
883 = Au 0.1µm Min.
NUMBER OF 885 = Au 0.25µm Min.
POSITIONS
20, 30, 40, 50, 60
VARIATION CODE
301 = Height Between Boards
“D” 12.0mm (0.472")
401 = Height Between Boards
“D” 15.0mm (0.591")
501 = Height Between Boards
“D” 18.0mm (0.709")
101 = Height Between Boards
“D” 20.0mm (0.787")

No. of
A B C
Positions
20 22.86 33.26 30.46
30 35.56 45.96 43.16
40 48.26 58.66 55.86
50 60.96 71.36 68.56
60 73.66 84.06 81.26
See Ordering Code about “D”
Series 9072 Receptacle
ORDERING CODE
00 9072 0XX 901 8XX
FINISHING CODE
(Gold-Mating Area)
883 = Au 0.1µm Min.
NUMBER OF POSITIONS 885 = Au 0.25µm Min.
20, 30, 40, 50, 60

No. of
A B C
Positions
20 22.86 25.86 30.46
30 35.56 38.56 43.16
40 48.26 51.26 55.86
50 60.96 63.96 68.56
60 73.66 76.66 81.26

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #252. Visit our website http://www.avxcorp.com

252 ELCO
Microleaf Connectors 1.27mm Pitch
Series 5061 Plug Straight (With Flange)
ORDERING CODE
10 5061 XXX 002 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
PLUG 68, 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +4.2
C = A +7.62
D = A +14.0

Series 5061 Receptacle Straight (With Flange)

ORDERING CODE
20 5061 XXX 052 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
RECEPTACLE 68, 80, 100, 120)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #253. Visit our website http://www.avxcorp.com

ELCO 253
Microleaf Connectors 1.27mm Pitch
Series 5061 Plug Straight (Without Flange)
ORDERING CODE
10 5061 XXX 000 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
PLUG 68, 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +3.0
C = A +7.0

Series 5061 Receptacle Straight (Without Flange)

ORDERING CODE
20 5061 XXX 051 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION
NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
RECEPTACLE 68, 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +4.2
C = A +7.0

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #254. Visit our website http://www.avxcorp.com

254 ELCO
Microleaf Connectors 1.27mm Pitch
Series 5061 Plug Right Angle (With Flange)
ORDERING CODE
10 5061 XX0 103 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
PLUG 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +3.0
C = A +7.62
D = A +14.0

Series 5061 Receptacle Right Angle (With Flange)

ORDERING CODE
20 5061 XX0 103 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
RECEPTACLE 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +4.2
C = A +7.62
D = A +14.0

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #255. Visit our website http://www.avxcorp.com

ELCO 255
Microleaf Connectors 1.27mm Pitch
Series 5061 Plug Right Angle (With Flange) and (With Guide)
ORDERING CODE
10 5061 XX0 102 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
PLUG 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +7.4
C = A +12.7
D = A +18.8

Series 5061 Receptacle Right Angle ORDERING CODE

(With Flange) and (With Guide) 20 5061 XXX 102 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
SERIES VARIATION

RECEPTACLE NO. OF POSITIONS

(20, 30, 40, 50, 60, 68,
80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +9.2
C = A +12.7
D = A +18.8

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #256. Visit our website http://www.avxcorp.com

256 ELCO
Microleaf Connectors 1.27mm Pitch
Series 5061 Plug Right Angle (Without Flange)
ORDERING CODE
10 5061 XX0 106 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
VARIATION

NO. OF POSITIONS
SERIES (20, 30, 40, 50, 60,
PLUG 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +3.0
C = A +7.0

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #257. Visit our website http://www.avxcorp.com

ELCO 257
Microleaf Connectors 1.27mm Pitch
Series 5072 Plug Straight (With Flange)
ORDERING CODE
10 5072 XX0 001 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WITH FLANGE WITH KINK
NO. OF POSITIONS
SERIES (20, 30, 40, 50,
PLUG 60, 80, 100, 120)

A = 1.27 (N⁄2 -1)

B = A +3.0
C = A +4.2
D = A +14.0

Series 5072 Plug Straight Wide Location

ORDERING CODE
10 5072 0X0 002 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WIDE LOCATION
NO. OF POSITIONS
SERIES (20, 50)
RECEPTACLE

A = 1.27 (N⁄2 -1)

B = A +11.93

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #258. Visit our website http://www.avxcorp.com

258 ELCO
Microleaf Connectors 1.27mm Pitch
Series 5072 Plug Right Angle (With Flange)
ORDERING CODE
10 5072 XX0 103 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WITH FLANGE

A = 1.27 (N⁄2 -1) NO. OF POSITIONS

SERIES (20, 30, 40, 50, 60,
B = A +4.2 PLUG 80, 100, 120)
C = A +7.62
D = A +41.0

A = 1.27 (N⁄2 -1)

B = A +3.0
C = A +7.62
D = A +14.0

Series 5072 Plug Right Angle (With Flange, With Guide)

ORDERING CODE
10 5072 120 112 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WITH FLANGE
AND GUIDE
(Short Type)
NO. OF PINS
SERIES (120)
PLUG

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #259. Visit our website http://www.avxcorp.com

ELCO 259
Microleaf Connectors 1.27mm Pitch
Series 5072 Plug Right Angle (With Flange, With Guide)
(High Pin Count)
ORDERING CODE
10 5072 XX0 105 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WITH FLANGE, WITH GUIDE
RETENTION CLIP
NO. OF POSITIONS
SERIES (140, 160, 180, 200)
PLUG

A = 1.27 (N⁄4 -1) D = A + B +18.8

B = A +7.62 E = A + B +8.6
C = A +10.16 F = A + B +12.7

Series 5061 Receptacle Straight (With Flange, With Guide)

(High Pin Count)
ORDERING CODE
20 5061 XX0 067 8XX
FINISH
856 = Au 0.1µm
861 = Au 0.25µm
871 = Au 0.5µm
WITH FLANGE, WITH GUIDE
RETENTION CLIP
NO. OF POSITIONS
SERIES (140, 160, 180, 200)
RECEPTACLE

A = 1.27 (N⁄4 -1) F = A +10.16

B = A +7.62 G = A + B +12.7
C = A + B +9.8 H = A + B +18.8
D = A + B +10.8

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #260. Visit our website http://www.avxcorp.com

260 ELCO
Microleaf SMT Connectors 1.0mm Pitch
Series 5078 Plug Straight With Vacuum Pick Up Clip
(30~60 Positions)
ORDERING CODE
14 5078 0X0 100 8XX
FINISH
861 = Ni over
Au Plating
833 = Pd/Ni over
Au Plating
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
14 = Plug

A = 1 (N⁄2 -1) E = 1 (N⁄2 -1)+8

B = 1 (N⁄2 -1)+2 F = 1 (N⁄2 -1)+12
C = 1 ( ⁄2 -1)+4
N
G = 1 (N⁄2 -1)+6
D = 1 (N⁄2 -1)+4.7

Series 5078 Receptacle Straight With Vacuum Pick Up Clip

(30~60 Positions)
ORDERING CODE
24 5078 0X0 100 8XX
FINISH
861 = Ni over
Au Plating
833 = Pd/Ni over
Au Plating
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

A = 1 (N⁄2 -1) E = 1 (N⁄2 -1)+8

B = 1 (N⁄2 -1)+2.5 F = 1 (N⁄2 -1)+12
C = 1 (N⁄2 -1)+4 G = 1 (N⁄2 -1)+6
D = 1 (N⁄2 -1)+4.5

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #261. Visit our website http://www.avxcorp.com

ELCO 261
Microleaf SMT Connectors 1.0mm Pitch
Series 5078 Plug Straight With Vacuum Pick Up Clip
(80~120 Positions)
ORDERING CODE
19 5078 XX0 000 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
19 = Plug

A = 1 (N⁄4 -1) E = 1 (N⁄2 -1)+10

B = 1 (N⁄4 -1)+2 F = 1 (N⁄2 -1)+14
C = 1 (N⁄2 -1)+6 G = 1 (N⁄2 -1)+8
D = 1 (N⁄2 -1)+6.7

Series 5078 Receptacle Straight With Vacuum Pick Up Clip

(80~120 Positions)
ORDERING CODE
29 5078 000 000 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
29 = Receptacle

A = 1 (N⁄4 -1) E = 1 (N⁄2 -1)+10

B = 1 (N⁄4 -1)+2.45 F = 1 (N⁄2 -1)+14
C = 1 (N⁄2 -1)+6 G = 1 (N⁄2 -1)+8
D = 1 (N⁄2 -1)+6.5

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #262. Visit our website http://www.avxcorp.com

262 ELCO
Microleaf SMT Connectors 1.00mm Pitch
Series 5078 Standard SMT Plug Right Angle
(30~60 Positions)
ORDERING CODE
14 5078 0X0 510 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
14 = Plug

A = 1 (N⁄2 -1) D = 1 (N⁄2 -1)+2

B = 1 (N⁄2 -1)+0.5 E = 1 (N⁄2 -1)+4.7
C = 1 (N⁄2 -1)+8 F = 1 (N⁄2 -1)+4.0

Series 5078 Standard SMT Receptacle Right Angle

(30~60 Positions)
ORDERING CODE
24 5078 0X0 510 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

A = 1 (N⁄2 -1) E = 1 (N⁄2 -1)+4.5

B = 1 (N⁄2 -1)+0.5 F = 1 (N⁄2 -1)+4.0
C = 1 (N⁄2 -1)+8.0
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #263. Visit our website http://www.avxcorp.com

ELCO 263
Microleaf SMT Connectors 1.00mm Pitch
Series 5078 Lead Reflow Plug Right Angle
(30~60 Positions)
ORDERING CODE
14 5078 0X0 511 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
14 = Plug

A = 1 (N⁄2 -1) F = 1 (N⁄2 -1)+4.0

B = 1 (N⁄2 -1)+0.5 H = 1 (N⁄2 -1)+8.5
C = 1 (N⁄2 -1)+8

Series 5078 Lead Reflow Receptacle Right Angle

(30~60 Positions)
ORDERING CODE
24 5078 0X0 511 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

A = 1 (N⁄2 -1) C = 1 (N⁄2 -1)+8

B = 1 (N⁄2-1)+0.5 H = 1 (N⁄2 -1)+8.5

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #264. Visit our website http://www.avxcorp.com

264 ELCO
Microleaf SMT Connectors 1.00mm Pitch
Series 5078 Standard SMT Plug Right Angle
(80~120 Positions)
ORDERING CODE
19 5078 XX0 520 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
19 = Plug

A = 1 (N⁄4 -1) F = 1 (N⁄2 -1)+6

B = 1 (N⁄4 -1)+0.5 G = 1 (N⁄2 -1)+8
C = 1 (N⁄2 -1)+10

Series 5078 Standard SMT Receptacle Right Angle

(80~120 Positions)
ORDERING CODE
29 5078 XX0 520 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
29 = Receptacle

A = 1 (N⁄4 -1) F = 1 (N⁄2 -1)+6

B = 1 (N⁄4 -1)+0.5 G = 1 (N⁄2 -1)+8
C = 1 (N⁄2 -1)+10

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #265. Visit our website http://www.avxcorp.com

ELCO 265
Microleaf SMT Connectors 1.00mm Pitch
Series 5078 Lead Reflow Plug Right Angle
(80~120 Positions)
ORDERING CODE
19 5078 XX0 521 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
19 = Plug

A = 1 (N⁄4 -1) F = 1 (N⁄2 -1)+6

B = 1 (N⁄4 -1)+0.5 G = 1 (N⁄2 -1)+10.5
C = 1 (N⁄2 -1)+10

Series 5078 Lead Reflow Receptacle Right Angle

(80~120 Positions)
ORDERING CODE
29 5078 XX0 521 8XX
FINISH
861 = Au 0.25µm
833 = Au Flash
VARIATION
NUMBER OF POSITIONS
SERIES (80, 100, 120)
TRAY
29 = Receptacle

A = 1 (N⁄4 -1) F = 1 (N⁄2 -1)+6

B = 1 (N⁄4 -1)+0.5 G = 1 (N⁄2 -1)+10.5
C = 1 (N⁄2 -1)+10

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #266. Visit our website http://www.avxcorp.com

266 ELCO
Microleaf SMT Connectors 1.0mm Pitch
Series 5077 Plug Straight With Vacuum Pick Up Clip
(30~60 Positions)
ORDERING CODE
14 5077 0X0 1X X 861
FINISH
861 = Au 0.25µm
VARIATION
0 = standard
1 = H1 Type
2 = H2 Type
TYPE 0 = without Boss
1 = with Boss
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
14 = Plug

A = 1 (N⁄2 -1)
B = 1 (N⁄2 -1)+8
C = 1 (N⁄2 -1)+6

Series 5077 Receptacle Straight With Vacuum Pick Up Clip

(30~60 Positions)
ORDERING CODE
24 5077 0X0 1X X 861
FINISH
861 = Au 0.25µm
VARIATION
0 = Standard
2 = H2 Type
TYPE 0 = without Boss
1 = with Boss
NUMBER OF POSITIONS
SERIES (30, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

A = 1 (N⁄2 -1)
B = 1 (N⁄2 -1)+8
C = 1 (N⁄2 -1)+6

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #267. Visit our website http://www.avxcorp.com

ELCO 267
Super Micro Connectors 0.8mm Pitch
Series 8375 Plug
ORDERING CODE
14 8375 0XX X 30 8X8
FINISH
808 = Tin Plating
858 = Gold Plating

TYPE 2 = without Boss

3 = with Boss
NUMBER OF POSITIONS
SERIES (16, 22, 28)
TAPE AND REEL
14 = Plug

A = 0.8 (N⁄2 -1)

B = 0.8 (N⁄2 -1)+2.7
E = 0.8 (N⁄2 -1)+1.8
F = 0.8 (N⁄2 -1)+1.0

Series 8375 Receptacle

ORDERING CODE
24 8375 0XX X 00 8X8
FINISH
808 = Tin Plating
858 = Gold Plating

TYPE 2 = without Boss

3 = with Boss
NUMBER OF POSITIONS
SERIES (16, 22, 28)
TAPE AND REEL
24 = Receptacle

A = 0.8 (N⁄2 -1)

B = 0.8 (N⁄2 -1)+2.7
E = 0.8 (N⁄2 -1)+1.8
F = 0.8 (N⁄2 -1)+1.0

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #268. Visit our website http://www.avxcorp.com

268 ELCO
Super Micro Connectors 0.5mm Pitch
Series 5087 Plug
ORDERING CODE
14 5087 0XX X XX 8XX
FINISH
861 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.38µm min.
829 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.1µm min.
VARIATION
30 : H = 3.0mm
35 : H = 3.5mm
40 : H = 4.0mm
TYPE 0 = without Boss with
Retention Clip
2 = without Boss,
Retention Clip
9 = without Boss,
Retention Clip,
with Adhesive Tape
NUMBER OF POSITIONS
SERIES (20, 30, 32, 36, 40, 50, 60)
TAPE AND REEL
14 = Plug

A = 0.5 (N⁄2 -1)

B = 0.5 (N⁄2 -1)+2.7
C = 0.5 (N⁄2 -1)+1.7
D = 0.5 (N⁄2 -1)+1.0

H = 3.0mm Type H = 3.5mm Type H = 4.0mm Type

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #269. Visit our website http://www.avxcorp.com

ELCO 269
Super Micro Connectors 0.5mm Pitch
Series 5087 Receptacle H = 3.0 ~ 4.0mm Type
ORDERING CODE
24 5087 0XX X 00 8XX
FINISH
861 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.38µm min.
829 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.1µm min.
VARIATION
H = 3.0 ~ 4.0mm
TYPE 0 = without Boss with
Retention Clip
2 = without Boss,
Retention Clip
9 = without Boss,
Retention Clip,
with Adhesive Tape
NUMBER OF POSITIONS
SERIES (20, 30, 32, 36, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

A = 0.5 (N⁄2 -1)

B = A +2.7
C = A +1.9
D = A +0.9

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #270. Visit our website http://www.avxcorp.com

270 ELCO
Super Micro Connectors 0.5mm Pitch
Series 5087 Plug
ORDERING CODE
14 5087 0XX X XX 8XX
FINISH
861 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.38µm min.
H = 2.0mm Type 829 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.1µm min.
VARIATION
20 : H = 2.0mm
25 : H = 2.5mm
TYPE 0 = without Boss with
Retention Clip
2 = without Boss,
Retention Clip
H = 2.5mm Type 9 = without Boss,
Retention Clip,
with Adhesive Tape
NUMBER OF POSITIONS
SERIES (10*, 20, 30, 40, 50, 60) *2.0mm H only
TAPE AND REEL
14 = Plug

A = 0.5 (N⁄2 -1)

B = 0.5 (N⁄2 -1)+4.4
D = 0.5 (N⁄2 -1)+1.5

Series 5087 Receptacle H = 2.0 ~ 2.5mm Type

ORDERING CODE
24 5087 0XX X 01 8XX
FINISH
861 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.38µm min.
829 = Ni Under Coated
1.25µm min.
Gold-Mating Area
Au 0.1µm min.
VARIATION
H = 2.0 ~ 2.5mm
TYPE 0 = without Boss with
Retention Clip
2 = without Boss,
Retention Clip
9 = without Boss,
Retention Clip,
with Adhesive Tape
NUMBER OF POSITIONS
SERIES (10, 20, 30, 40, 50, 60)
TAPE AND REEL
24 = Receptacle

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #271. Visit our website http://www.avxcorp.com

ELCO 271
Board-to-Board Super Microleaf
Series 5046 Plug – 0.5mm Pitch

Plug
ORDERING CODE
Stacking
Part Number
Height
Female 24 5046 XXX X00 829
4.5mm
Male 14 5046 XXX X45 829
No. of Female 24 5046 XXX X00 829
4.0mm
A B C Male 14 5046 XXX X40 829
Positions
Female 24 5046 XXX X00 829
20 4.5 10.5 7.7 3.5mm
Male 14 5046 XXX X35 829
A = 0.5 (N⁄2 -1) 30 7.0 13.0 10.2
Female 24 5046 XXX X00 829
40 9.5 15.5 12.7 3.0mm
B = A +6.0 Male 14 5046 XXX X30 829
50 12.0 18.0 15.2
C = A +3.2 60 14.5 20.5 17.7 NO. OF POSITIONS
70 17.0 23.0 20.2 VARIATION CODE
80 19.5 25.5 22.7 0 = W/O Metal Tab
90 22.0 28.0 25.2 1 = With Metal Tab
100 24.5 30.5 27.7 5 = W/O Metal Tab / With Kapton Tape
110 27.0 33.0 30.2 6 = With Metal Tab / With Kapton Tape
120 29.5 35.5 32.7

Series 5046 Receptacle – 0.5mm Pitch

Receptacle

No. of
Positions A B C
20 4.5 10.5 7.7
30 7.0 13.0 10.2
40 9.5 15.5 12.7
50 12.0 18.0 15.2
60 14.5 20.5 17.7
70 17.0 23.0 20.2
80 19.5 25.5 22.7
90 22.0 28.0 25.2
100 24.5 30.5 27.7
110 27.0 33.0 30.2
120 29.5 35.5 32.7

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #272. Visit our website http://www.avxcorp.com

272 ELCO
Board-to-Board Super Microleaf
Series 5047 Plug – 0.5mm Pitch
No. of
Positions A B C
20 4.5 7.5 0.25
30 7.0 10.0 0.5
40 9.5 12.5 0.25
50 12.0 15.0 0.5
60 14.5 17.5 0.25
70 17.0 20.0 0.5
80 19.5 22.5 0.25
90 22.0 25.0 0.5
Plug 100 24.5 27.5 0.25
110 27.0 30.0 0.5
120 29.5 32.5 0.25

A = 0.5 (N⁄2 -1)

B = A +3.0

Series 5047 Receptacle – 0.5mm Pitch

ORDERING CODE
Stacking
Part Number
Receptacle Height
Female 24 5047 XXX 400 XXX
5.0mm
Male 14 5047 XXX 450 XXX
Female 24 5047 XXX 400 XXX
7.0mm
Male 14 5047 XXX 470 XXX
NO. OF POSITIONS
VARIATION CODE
4 = W/O Kapton Tape
2 = With Kapton Tape
FINISH CODE

Contact Area
856 Au 0.1 µm/MIN
861 Au 0.2 µm/MIN

No. of
Positions A B C
20 4.5 7.5 0.25
30 7.0 10.0 0.5
40 9.5 12.5 0.25
50 12.0 15.0 0.5
60 14.5 17.5 0.25
70 17.0 20.0 0.5
80 19.5 22.5 0.25
90 22.0 25.0 0.5
100 24.5 27.5 0.25
110 27.0 30.0 0.5
120 29.5 32.5 0.25

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #273. Visit our website http://www.avxcorp.com

ELCO 273
MOBO One Piece Board To Board
Series 9158 – Dual Row Solo Stacker™

(28 position example)

Features
• Superior drop test performance
• Variable stack height to 0.9mm
• Single piece construction

ORDERING CODE
58 9158 XXX 000 0XX
STACK HEIGHT

NO. OF POSITIONS
SERIES
PREFIX

Series 9158 – Solo Stacker™ – Product Availability

No. of Nominal Stack Height (mm)
Positions
2.00 2.20 2.40 2.60 3.00 3.20 4.00 5.00
4 way •
16 way •* •* •* •
18 way •
20 way •* •* •* •*
24 way •* •* •* •*
28 way •* •* •* •* •
30 way •
32 way •
34 way •
*Denotes that part is currently being tooled.
All stack height dimensions are nominal. Tolerance varies depending on application.
Connectors can be supplied with or without location bosses.
Cells with grey shading denote that part is custom special.
Custom options available.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #274. Visit our website http://www.avxcorp.com

274 ELCO
Torson Board To Board Connectors
.050 Centerline, 2 Row, Vertical, Thru Board

ORDERING CODE
10 5016 2XXX 10 001

.050 Centerline, 2 Row, SMT, Vertical

ORDERING CODE
11 5016 2XXX 10 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #275. Visit our website http://www.avxcorp.com

ELCO 275
Torson Board To Board Connectors
.050 Centerline, 2 Row, Low Profile

ORDERING CODE
12 5016 2XXX 10 001

.050 Centerline, 2 Row, SMT, Low Profile Vertical

ORDERING CODE
17 5016 2XXX 10 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #276. Visit our website http://www.avxcorp.com

276 ELCO
Torson Board To Board Connectors
.050 Centerline, 2 Row, Right Angle, Thru Board

ORDERING CODE
20 5016 2XXX 20 001

.050 Centerline, 2 Row, Vertical, Thru Board

ORDERING CODE
20 5016 2XXX 10 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #277. Visit our website http://www.avxcorp.com

ELCO 277
Torson Board To Board Connectors
.050 Centerline, 2 Row, Vertical, SMT

ORDERING CODE
21 5016 2XXX 10 001

.050 Centerline, Low Profile, Thru Board, Top Entry

ORDERING CODE
2 5016 2XXX 10 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #278. Visit our website http://www.avxcorp.com

278 ELCO
Torson Board To Board Connectors
.050 Centerline, Low Profile, Top Entry, SMT

ORDERING CODE
23 5016 2XXX 10 001

.050 Centerline, Low Profile, Bottom Entry

ORDERING CODE
24 5016 2XXX 10 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #279. Visit our website http://www.avxcorp.com

ELCO 279
Elco Current FFC/FPC, Options
FFC/FPC Connectors
Pitch Series Soldering Style Ag/C Position Contact Height (in mm) Current Voltage Standard
SMT DIP ZIF LIF ST RA Type Number ST RA Rating Rating Packaging
1.25mm 5062 O Non Non O 5P~23P No Contact 5 1A 125V Bulk
(Direct-Solder)
6203 O O BOTTOM ENTRY 5P~15P Single 5.5 1A 125V Tray

6205 O O O 8P~40P Single 8.9 1A 125V Tray

6207 O O O O 5P~20P Double 7 3.5 1A 125V Tray/Tube

6216 O O O O 4P~40P Single 7 4.2 1A 125V Tray/Tube

Top/Bottom
8370 O O O O O 4P~30P Double 7.2 4.2 1A 125V Tray

1.00mm 6200 O O O O O 5P~30P Single Bottom 2.9 1A 50V 1Kpcs/Reel,

Tray
6208 O O O O O 5P~30P Single 5~5.5 1A 50V 1Kpcs/Reel,
Tray
6224 O O O O 5P~30P Single Top 2.9 1A 50V 1Kpcs/Reel,
Tray
6226 O O O 4P~20P Double 3.5 1A 50V 1Kpcs/Reel,
Tray
6227 O O O 4P~20P Double 2 1A 50V 1Kpcs/Reel,
Tray
6228 O O O O 3P~22P Single Top 4.8 3 0.5A 50V Tray

6229 O O O O 40P Single 5.7 1A 50V Tray

6231 O O O 26P Single 5.5 1A 50V 1Kpcs/Reel

6232 O O O O O 3P~30P Single 5.5 3 0.5A 50V 1Kpcs/Reel,

Top/Bottom Tray
6237 O O O 30P Single Bottom 2 0.4A 50V 1Kpcs/
Reel
6241 O O O 56P Single Bottom 5.45 0.5A 50V Tray

6247 O O O 48P Single 5.5 0.5A 50V Tray

6248 O O O 30P Single 5.5 0.5A 50V Tray

0.80mm 6206 O O O 4P~20P Double 2 0.5A 50V 1Kpcs/

Reel
6218 O O O 10P(5PX2) Double 3.5 0.5A 50V 1.5Kpcs/
Reel
2Kpcs/
0.50mm 6210 O O O 5P~30,33,36,40P Single Bottom 2 0.4A 50V Reel
6212 O O O 5P~30,33,35,36,40P Single Top 2 0.4A 50V 2Kpcs/
Reel
6214 O O O 6P~30P Single 4.1 0.4A 50V 1Kpcs/
Reel
6222 O O O 5P~30P Single Bottom 1.95 0.4A 50V 2Kpcs/
Reel
6223 O O O 5P~30P Single Top 1.95 0.4A 50V 2Kpcs/
Reel
6239 O O O 5P~30P Single 1.5 0.4A 50V 2Kpcs/
Bottom Flip Top Reel
6240 O O O 30P~50P Single 2 0.4A 50V 2Kpcs/
Bottom Flip Top Reel
6244 O O O 12/14/20/22 Single 4.1 0.4A 50V 1Kpcs/
Reel
6250 O O O 8,9,13P Single Bottom 0.9 0.4A 50V 2Kpcs/
Reel
6252 O O O 6,8,9,10,12,18,22,27P Single Top 0.9 0.4A 50V 2Kpcs/
Reel
6260 O O O O 5P~30P Single Bottom 2 0.4A 50V 2Kpcs/
Reel
6262 O O O O 5P~30P Single Top 2 0.4A 50V 2Kpcs/
Reel
0.30mm 6245 P P P Single Bottom Under Development

O = Mass Production Tool

P = Prototype

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #280. Visit our website http://www.avxcorp.com

280 ELCO
FFC/FPC Connectors 1.25mm Pitch
Series 6207 LIF Straight SMT
ORDERING CODE
00 6207 33 29 XX 000
NUMBER OF
POSITIONS (05-20)

A = 1.25 (N -1) Specifications

B = 1.25 N +1.41 • Number of Positions – 5-20
C = 1.25 N +5.75 • Tube Packaged
D = 1.25 N +1.75 • Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PPS
(UL 94 V-O) brown color
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 7.0mm (0.276")

Series 6207 LIF Right Angle SMT

ORDERING CODE
00 6207 34 19 XX 000
NUMBER OF
POSITIONS (05-20)

Specifications
• Number of Positions – 5-20
• Tube Packaged
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C -
A = 1.25 (N -1) +85°C)
B = 1.25 N +1.41 • Contact Material – phosphor bronze
C = 1.25 N +5.75 (tin-lead plated)
D = 1.25 N +1.75 • Insulator Material – glass-filled PPS
(UL 94 V-O) brown color
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 7.0mm (0.276")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #281. Visit our website http://www.avxcorp.com

ELCO 281
FFC/FPC Connectors 1.25mm Pitch
Series 5062 Straight
ORDERING CODE
00 5062 30 10 XX 000
NUMBER OF POSITIONS (05-23)
00=BULK PACKAGE

Specifications
• Number of Positions – 5-23
• Vinyl Bag Packaged
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Insulator Material – PBT, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05 mm (0.012 ±0.002")
• PCB Thickness – 1.6mm (0.633")
• Profile Height – 5.0mm (0.197")

A = 1.25 (N -1)
B = 1.25 N +1.73
C = 1.25 N +3.75
D = 1.25 N +2.5

Series 6203 LIF Right Angle Through-Hole (Bottom Entry)

ORDERING CODE
00 6203 3010 XX 000
NUMBER OF POSITIONS (05-15)
TRAY PACKAGE
A = 1.25 (N -1)
B = 1.25 N +3.03
Specifications
• Number of Positions – 5-15
• Tray Packaged
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled nylon
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05 mm (0.012 ±0.002")
• PCB Thickness – 1.2-1.6mm (0.047-0.063")
• Allows insertion of FFC/FPC from bottom
of PC board, at edge or through slit
• Profile Height – 5.5mm (0.217")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #282. Visit our website http://www.avxcorp.com

282 ELCO
FFC/FPC Connectors 1.25mm Pitch
Series 6205 ZIF Straight Through-Hole
ORDERING CODE
00 6205 XX0 500 825
NUMBER OF POSITIONS (08-40)
TRAY PACKAGE

Specifications
• Number of Positions – 8-40
• Tray Packaged
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-40°C - +90°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
• Slider Material – glass-filled PBT,
(UL 94 V-O) beige color
• FFC/FPC Thickness –
0.3 ±0.05 mm (0.012 ±0.002")
• PCB Thickness – 1.6mm (0.063")
• Profile Height – 8.9mm (0.350")
A = 1.25 N +6.85

Series 6216 LIF Right Angle Through-Hole (Bottom Contact)

ORDERING CODE
XX 6216 0XX 10X 808
NUMBER OF VARIATION CODE
POSITIONS 0:WITH KINKED LEGS
(04-30) (EACH TWO PINS AT BOTH ENDS)
1:WITHOUT KINKED LEGS
00:TRAY PACKAGE
28:TUBE PACKAGE

Specifications
• Number of Positions – 4-40
• Tube Packaged or Tray Packaged
• Voltage – 200 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm
(0.012 ±0.002")
A = 1.25 (N -1) • PCB Thickness – 1.0-1.6mm (0.039-0.633")
B = 1.25 N +1.41 • Profile Height – Straight – 7.0mm (0.276")
C = 1.25 N +2.5 Right Angle – 4.2mm (0.165")
• Reverse footprint for straight type also
available – contact sales office for details

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #283. Visit our website http://www.avxcorp.com

ELCO 283
FFC/FPC Connectors 1.25mm Pitch
Series 6216 LIF Right Angle Through-Hole (Top Contact)
ORDERING CODE
XX 6216 0XX 11X 808
00:TRAY VARIATION CODE
PACKAGE 0:WITH KINKED LEGS
28:TUBE (EACH TWO PINS AT
BOTH ENDS)
PACKAGE
NUMBER OF 1:WITHOUT KINKED
POSITIONS (04-30) LEGS

Specifications
• Number of Positions – 4-40
• Tube Packaged or Tray Packaged
• Voltage – 200 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - 85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
A = 1.25 (N -1)
• FFC/FPC Thickness – 0.3 ±0.05 mm
B = 1.25 N +1.41
(0.012 ±0.002")
C = 1.25 N +2.5
• PCB Thickness - 1.0-1.6mm (0.039-0.633")
• Profile Height – Straight – 7.0mm (0.276")
Right Angle – 4.2mm (0.165")
• Reverse footprint for straight type also
available – contact sales office for details

Series 6216 LIF Right Angle Through-Hole (High Pin Count)

ORDERING CODE
00 6216 0XX 12X 808
NUMBER VARIATION CODE
OF 0:WITH KINKED LEGS
POSITIONS (31-40) (EACH TWO PINS AT BOTH ENDS)
1:WITHOUT KINKED LEGS
TRAY PACKAGE

Specifications
• Number of Positions – 4-40
• Tube Packaged or Tray Packaged
• Voltage – 200 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm
(0.012 ±0.002")
• PCB Thickness – 1.0-1.6mm
(0.039-0.633")
• Profile Height – Straight –
7.0mm (0.276")
Right Angle –
A = 1.25 N +3.75 4.2mm (0.165")
B = 1.25 N +1.41 • Reverse footprint for straight type also
C = 1.25 (N -1) available – contact sales office for details

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #284. Visit our website http://www.avxcorp.com

284 ELCO
FFC/FPC Connectors 1.25mm Pitch
Series 6216 LIF Straight Through-Hole
ORDERING CODE
00 6216 0XX 00X 808
A = 1.25 (N -1) NUMBER VARIATION CODE
B = 1.25 N +1.41 OF 0:WITH KINKED LEGS
C = 1.25 N +2.5 POSITIONS (04-30) (EACH TWO PINS AT BOTH ENDS)
TRAY PACKAGE 1:WITHOUT KINKED LEGS

Specifications
• Number of Positions – 4-40
• Tube Packaged or Tray Packaged
• Voltage – 200 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature –
(-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm
(0.012 ±0.002")
• PCB Thickness - 1.0-1.6mm
(0.039-0.633")
• Profile Height – Straight –
7.0mm (0.276")
Right Angle –
4.2mm (0.165")
• Reverse footprint for straight type also
available – contact sales office for details

Series 6216 LIF Straight Through-Hole (High Pin Count)

A = 1.25 N +3.75
ORDERING CODE
B = 1.25 N +1.41 00 6216 1XX 82X 808
C = 1.25 (N -1) NUMBER VARIATION CODE
OF 0:WITH KINKED LEGS
POSITIONS (31-40) (EACH TWO PINS AT BOTH ENDS)
1:WITHOUT KINKED LEGS
TRAY PACKAGE

Specifications
• Number of Positions – 4-40
• Tube Packaged or Tray Packaged
• Voltage – 200 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PBT,
(UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm
(0.012 ±0.002")
• PCB Thickness - 1.0-1.6mm (0.039-0.633")
• Profile Height – Straight – 7.0mm (0.276")
Right Angle – 4.2mm (0.165")
• Reverse footprint for straight type also
available – contact sales office for details

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #285. Visit our website http://www.avxcorp.com

ELCO 285
FFC/FPC Connectors 1.25mm Pitch
Series 8370 LIF Straight Through-Hole (Dual Sided Contact)
ORDERING CODE
00 8370 XX1 00X 800
NUMBER 0=TRAY PACKAGE
OF 1=TUBE PACKAGE
POSITIONS (04-30)
0=KINKED LEGS (Preferred option)
1=NON-KINKED LEGS
Specifications
• Number of Positions – 4-30
• Tray Packaged or Tube
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – glass-filled PBT, (UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm (0.012 ±0.002")
• PCB Thickness – 1.0 - 1.6mm (0.039-0.633")
• Profile Height – Straight – 7.2mm (0.276")
Right Angle – 4.2mm (0.165")
A = 1.25 (N -1)
B = 1.25 N +1.41
C = 1.25 N +3.75

Series 8370 LIF Right Angle Through-Hole (Dual Sided Contact)

ORDERING CODE
00 8370 XX7 00X 800
NUMBER 0=TRAY PACKAGE
OF 1=TUBE PACKAGE
POSITIONS (04-30)
0=KINKED LEGS (Preferred option)
1=NON-KINKED LEGS

Specifications
• Number of Positions – 4-30
• Tray Packaged or Tube
• Voltage – 125 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – glass-filled PBT, (UL 94 V-O) black color
• FFC/FPC Thickness – 0.3 ±0.05 mm (0.012 ±0.002")
• PCB Thickness – 1.0 - 1.6mm (0.039-0.633")
• Profile Height – Straight – 7.2mm (0.276")
Right Angle – 4.2mm (0.165")

A = 1.25 (N -1)
B = 1.25 N +1.41
C = 1.25 N +3.75

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #286. Visit our website http://www.avxcorp.com

286 ELCO
FFC/FPC Connectors 1.00mm Pitch
Series 6200 ZIF Right Angle SMT (Bottom Contact)
ORDERING CODE
XX 6200 XX7 XXX 800
NUMBER VARIATION CODE
OF 052:WITH SOLDER TAB/BOSS
POSITIONS (05-30) 022:WITH ALIGNMENT BOSS
032:WITH SOLDER TAB/NO BOSS
TRAY PACKAGE
FLEX TYPE
00=STANDARD
05=CARBON PASTE MEMBRANE FLEX

Specifications
• Number of Positions – 5-30
• Tray Packaged (For Tape & Reel Contact Sales Office)
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator & Slider Material – PPS, brown color (UL 94 V-O)
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
A, F = 1.00 (N-1) • Profile Height – 2.90mm (0.114")
B = 1.00N + 1.4
C, D = 1.00N + 7.25
E = 1.00N + 7.65

Series 6200 ZIF Right Angle Through-Hole (Bottom Contact)

ORDERING CODE
XX 6200 XX7 012 800
NUMBER
OF
POSITIONS (05-30)
TRAY PACKAGE
FLEX TYPE
00=STANDARD FFC/FPC
05=CARBON PASTE MEMBRANE FLEX

Specifications
• Number of Positions – 5-30
• Tray Packaged
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
A = 1.00 (N-1)
• Insulator & Slider Material – PPS, brown color
B = 1.00N + 1.4
(UL 94 V-O)
C = 1.00N + 6.45
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.90mm (0.114")
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #287. Visit our website http://www.avxcorp.com

ELCO 287
FFC/FPC Connectors 1.00mm Pitch
Series 6208 ZIF Straight SMT
ORDERING CODE
XX 6208 XXX 0XX XXX
00=TRAY FLEX TYPE
08=TUBE 000=STANDARD
PACKAGE 009=CARBON PASTE
VARIATION CODE NUMBER
*500:SMT WITHOUT BOSS OF
520:SMT WITH BOSS (2 Places) POSITIONS (05-30)

Specifications
• Number of Positions – 5-30
• Tray Packaged, Tube or Tape & Reel -
(Contact Sales Office for Tape & Reel)
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-30°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Slider Material – PPS (UL 94 V-O)
• Insulator Material – glass-filled nylon, PPS
A = 1.00 (N-1) • FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
B = 1.00N + 1.4 • PCB Thickness – 1.2-1.6mm .047 ~ .063"
C = 1.00N + 6.4 • Profile Height – See “E” dimension

No. of Positions D E F G
5 to 20 3.4 5.0 6.5 0.8
21 to 25 3.6 5.2 6.7 1.0
26 to 30 3.9 5.5 7.0 1.3

Series 6208 ZIF Straight Through-Hole

ORDERING CODE
XX 6208 X X 0 1XX 001
NUMBER OF POSITIONS (05-30)
0:WITHOUT BOSS
1:WITH BOSS (1 Place)
0:WITH KINKED LEGS (Preferred option)
1:WITHOUT KINKED LEGS
08=TUBE PACKAGE
(WITHOUT KINKED LEGS/BOSS)

Specifications
• Number of Positions – 5-30
• Tray Packaged, Tube Packaged
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-30°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Slider Material – PPS (UL 94 V-O)
• Insulator Material – glass-filled nylon, PPS
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• PCB Thickness – 1.2-1.6mm .047 ~ .063"
A = 1.00 (N-1) • Profile Height – See “E” dimension
B = 1.00N + 1.4
C = 1.00N + 6.4

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #288. Visit our website http://www.avxcorp.com

288 ELCO
FFC/FPC Connectors 1.00mm Pitch
Series 6224 ZIF Right Angle SMT (Top Contact)
A = 1.00 (N-1)
ORDERING CODE
B = 1.00N + 1.2 XX 6224 0XX XXX 800
C = 1.00N + 7.2 NUMBER FLEX TYPE
OF 001: STANDARD WITHOUT BOSS
POSITIONS (05-30) 002: CARBON PASTE WITHOUT
BOSS
003: STANDARD WITH BOSS
(Tray only)
004: CARBON PASTE WITH BOSS
(Tray only)
08=TAPE AND REEL
00=TRAY PACKAGING (only with boss)
Specifications
• Number of Positions – 5-30
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +85°C)
WITHOUT BOSS WITH BOSS • Contact & Metal Tab Material –
phosphor bronze (tin-lead plated)
Series 6226 LIF Straight SMT • Slider Material – PPS, black color
(UL 94 V-O)
(Dual Sided Contact) • Insulator Material – PPS, brown color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.90mm (0.114")
ORDERING CODE
A = 1.00 (N-1) 04 6226 0XX 001 800
B = 1.00N + 2.3 NUMBER OF POSITIONS (04-20)

TRAY PACKAGE

Specifications
• Number of Positions – 4-20
• Tray Packaged
• Some sizes available Tape & Reeled
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze(tin-lead plated)
• Insulator Material – glass-filled nylon
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 3.50mm (0.138")
Series 6227 LIF Right Angle SMT
(Dual Sided Contact) ORDERING CODE
04 6227 0XX 100 800
NUMBER OF POSITIONS (04-20)

TAPE AND REEL

Specifications
• Number of Positions – 4-20
A = 1.00 (N-1) • 1000 Connectors per Tape & Reel
B = 1.00N + 3.7 • Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact & Metal Tab Material – phosphor bronze (tin-lead plated)
• Insulator Material – nylon 46, natural color (UL 94 V-O)
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.00mm (0.079")
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #289. Visit our website http://www.avxcorp.com

ELCO 289
FFC/FPC Connectors 1.00mm Pitch
Series 6228 LIF Right Angle Through-Hole (Top Contact)
ORDERING CODE
00 6228 0XX 2X1 800
NUMBER 0=TAIL 3.2mm
OF 2=TAIL 2.5mm
POSITIONS (03-22)
TRAY PACKAGE

Specifications
• Number of Positions – 3-22
• Tray Packaged
• Voltage – 50 V
• Current Rating – 0.5 amp max.
A = 1.00 (N-1)
• Dielectric Withstanding Voltage – 500V rms/min.
B = 1.00N + 1.06
• Operating Temperature – (-20°C - +85°C)
C = 1.00N + 3.0
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – 66 nylon, natural color
(UL 94 V-O)
• FFC/FPC Thickness – 0.3 ±0.05mm
(0.012 ±0.002")
• PCB Thickness – 1.60mm (0.063")
• Profile Height – 3.00mm right angle (0.118")
4.80mm straight (0.189")

Series 6228 LIF Straight Through-Hole

ORDERING CODE
00 6228 0XX 1X1 800
NUMBER 0=TAIL 3.2mm
OF 2=TAIL 2.5mm
POSITIONS (03-22)

Specifications
• Number of Positions – 3-22
• Tray Packaged
• Voltage – 50 V
• Current Rating – 0.5 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – 66 nylon, natural color
(UL 94 V-O)
• FFC/FPC Thickness – 0.3 ±0.05mm
(0.012 ±0.002")
• PCB Thickness – 1.60mm (0.063")
• Profile Height – 3.00mm right angle (0.118")
4.80mm straight (0.189")

A = 1.00 (N-1)
B = 1.00N + 1.06
C = 1.00N + 3.0

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #290. Visit our website http://www.avxcorp.com

290 ELCO
FFC/FPC Connectors 1.00mm Pitch
Series 6229 ZIF Straight SMT
ORDERING CODE
00 6229 040 00X 800
NUMBER VARIATION CODE
OF 1:WITHOUT BOSS
POSITIONS (40 position only) 2:WITH BOSS
TRAY PACKAGE (70 per tray)

Specifications
• Number of Positions – 40
• Tray Packaged
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Slider Material – PPS, natural color
(UL 94 V-O)
• Insulator Material – PPS, black color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 5.7mm (0.224")

Series 6229 ZIF Straight Through-Hole

ORDERING CODE
00 6229 640 003 800
NUMBER OF POSITIONS
(40 position only)
TRAY PACKAGE (70 per tray)

Specifications
• Number of Positions – 40
• Tray Packaged
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Slider Material – PPS, natural color
(UL 94 V-O)
• Insulator Material – PPS, black color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 5.7mm (0.224")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #291. Visit our website http://www.avxcorp.com

ELCO 291
FFC/FPC Connectors 1.00mm Pitch
Series 6232 LIF Right Angle SMT (Top Contact)
ORDERING CODE
XX 6232 1XX 103 800
NUMBER OF POSITIONS (03-30)
00:TRAY PACKAGE
04:TAPE AND REEL

Specifications
• Number of Positions – 3-30
• Tray Packaged or SMT Tape and Reel
• Voltage – 50 V
A = 1.00 (N-1) • Current Rating – 0.50 amp max.
B = 1.00N + 1.1 • Dielectric Withstanding Voltage – 500V rms/min.
C = 1.00N + 3.6 • Operating Temperature – (-20°C - +70°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – glass filled PPS or Nylon
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 3.0mm

Series 6232 LIF Right Angle SMT (Bottom Contact)

ORDERING CODE
XX 6232 1XX 102 800
NUMBER OF POSITIONS (03-30)
00:TRAY PACKAGE
04:TAPE AND REEL

Specifications
A = 1.00 (N-1) • Number of Positions – 3-30
B = 1.00N + 1.1 • Tray Packaged or SMT Tape and Reel
C = 1.00N + 3.6 • Voltage – 50 V
• Current Rating – 0.50 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +70°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – glass filled PPS or Nylon
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 3.0mm

Series 6232 LIF Straight SMT

ORDERING CODE
XX 6232 1XX 0XX 800
006:TRAY PACKAGE
015:TAPE AND REEL
NUMBER OF POSITIONS
(03-30)
00:TRAY PACKAGE
04:TAPE AND REEL
Specifications
A = 1.00 (N-1) • Number of Positions – 3-30
B = 1.00N + 1.1 • Tray Packaged or SMT Tape and Reel
C = 1.00N + 3.0 • Voltage – 50 V
• Current Rating – 0.50 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +70°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – glass filled PPS or Nylon
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 5.1mm (0.118 – 0.200") (see sketch)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #292. Visit our website http://www.avxcorp.com

292 ELCO
FFC/FPC Connectors 1.00mm Pitch
Series 6232 LIF Right Angle Through-Hole (Bottom Contact)
ORDERING CODE
00 6232 0XX 104 800
TRAY NUMBER OF POSITIONS (03-30)
PACKAGE

Specifications
• Number of Positions – 3-30
A = 1.00 (N-1) • Tray Packaged
B = 1.00N + 1.12 • Voltage – 50 V
C = 1.00N + 3.0 • Current Rating – 0.50 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +70°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass filled PPS or Nylon
• FFC/FPC Thickness –
0.3 ±0.05 mm (0.012 ±0.002")
• Profile Height – 3.0mm – (see sketch)

Series 6232 LIF Straight Through-Hole

ORDERING CODE
00 6232 0XX XXX 800
NUMBER VARIATION CODE
OF 006: WITH KINKED LEGS
POSITIONS (03-30) 007: WITHOUT KINKED LEGS
TRAY
PACKAGE

Specifications
• Number of Positions – 3-30
• Tray Packaged
• Voltage – 50 V
• Current Rating – 0.50 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-20°C - +70°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass filled PPS or Nylon
• FFC/FPC Thickness –
0.3 ±0.05 mm (0.012 ±0.002")
• Profile Height – 5.5mm (0.217")

A = 1.00 (N-1)
B = 1.00N + 1.12 Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #293. Visit our website http://www.avxcorp.com
C = 1.00N + 3.0

ELCO 293
FFC/FPC Connectors 1.00mm Pitch
Series 6231 LIF Straight SMT
ORDERING CODE
04 6231 026 000 800
NUMBER OF POSITIONS
(26 position only)
TAPE AND REEL PACKAGE

Specifications
• Number of Positions – 26
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 1.0 amp max.
• Dielectric Withstanding Voltage – 500V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – glass-filled PPS
(UL 94 V-O) natural color
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 5.5mm (0.217")

Series 6237 ZIF Right Angle SMT (Bottom Contact)

ORDERING CODE
04 6237 030 000 800
NUMBER OF POSITIONS
(30 position only)
TAPE AND REEL PACKAGE

Specifications
• Number of Positions – 30
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact & Metal Tab Material –
phosphor bronze (tin-lead plated)
• Slider Material – PPS, natural color
(UL 94 V-O)
• Insulator Material – PPS, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.00mm (0.079")

A = 35.6 C = 38.2 E = 32.6

B = 29.0 D = 31.2

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #294. Visit our website http://www.avxcorp.com

294 ELCO
FFC/FPC Connectors 0.80mm Pitch
Series 6206 LIF Right Angle SMT (Dual Sided Contact)
ORDERING CODE
04 6206 0XX 000 800
NUMBER OF POSITIONS (04-20)

TAPE AND REEL

Specifications
• Number of Positions – 4-20
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.5 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature –
(-25°C - +85°C)
• Contact & Metal Tab Material –
phosphor bronze (tin-lead plated)
• Insulator Material – PPS, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.00mm (0.079")

A = 0.8 (N-1)
B = 0.8N + 5.6

Series 6218 LIF Straight SMT (Dual Type)

ORDERING CODE
04 6218 010 000 800
NUMBER OF POSITIONS
(10 position only)
TAPE AND REEL

Specifications
• Number of Positions – 10
• 1500 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.5 amp max.
• Dielectric Withstanding Voltage –
500V rms/min.
• Operating Temperature – (-25°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – nylon 46, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 3.5mm (0.138")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #295. Visit our website http://www.avxcorp.com

ELCO 295
FFC/FPC Connectors 0.50mm Pitch
Series 6210 ZIF Right Angle SMT (Bottom Contact)
ORDERING CODE
08 6210 0XX XXX 800
340 (Small metal tab/strain relief)
- Preferred option
010 (Large metal tab/strain relief)
NUMBER OF POSITIONS (05-30,33,36,40)
TAPE AND REEL

Specifications
• Number of Positions – 5-40
• 2000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – nylon 46, natural color
• Slider Material – PPS, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
A = 0.5N + 4.3 • Profile Height – 2.00mm (0.079")
B = 0.5 (N-1)
C = 0.5N + 6.3
D = 0.5N + 0.6

Series 6212 ZIF Right Angle SMT (Top Contact)

ORDERING CODE
08 6212 0XX XXX 800
340 (Small metal tab/strain relief)
- Preferred option
010 (Large metal tab/strain relief)
NUMBER OF POSITIONS
(05-30,33,35,36,40)
TAPE AND REEL

Specifications
• Number of Positions – 5-40
• 2000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature –
(-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – nylon 46,
black color
• Slider Material – PPS, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.00mm (0.079")
A = 0.5N + 4.3
B = 0.5 (N-1)
C = 0.5N + 6.3
D = 0.5N + 0.6

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #296. Visit our website http://www.avxcorp.com

296 ELCO
FFC/FPC Connectors 0.50mm Pitch
Series 6214 - ZIF Straight SMT
ORDERING CODE
04 6214 0XX XXX 800
NUMBER VARIATION CODE
OF 000: WITH STANDARD SLIDER
POSITIONS (06-30) 010: WITH EXTENDED SLIDER
TAPE AND REEL

Specifications
• Number of Positions – 6-30
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – nylon 46, natural color
(UL 94 V-O)
• Slider Material – PPS, natural color
(UL 94 V-O)
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 4.1mm (0.161")

A = 0.5N + 4.5
B = 0.5N + 3.9
C = 0.5 (N-1)
D = 0.5N + 0.6

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #297. Visit our website http://www.avxcorp.com

ELCO 297
FFC/FPC Connectors 0.50mm Pitch
Series 6222 LIF Right Angle SMT (Bottom Contact)
ORDERING CODE
08 6222 0XX 001 800
NUMBER OF POSITIONS (05-30)

TAPE AND REEL

Specifications
• Number of Positions – 5-30
• 2000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – PPS, natural color
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 1.95mm (0.077")

A = 0.5 (N-1)
B = 0.5N + 0.5
C = 0.5N + 2.5
D = 0.5N + 4.5

Series 6223 LIF Right Angle SMT (Top Contact)

ORDERING CODE
08 6223 0XX 001 800
NUMBER OF POSITIONS (05-30)

TAPE AND REEL

Specifications
• Number of Positions – 5-30
• 2000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage –
200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze
(tin-lead plated)
• Insulator Material – PPS, black color
• FFC/FPC Thickness –
0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 1.95mm (0.077")

A = 0.5 (N-1)
B = 0.5N + 0.5
C = 0.5N + 2.5
D = 0.5N + 4.5

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #298. Visit our website http://www.avxcorp.com

298 ELCO
FFC/FPC Connectors 0.50mm Pitch
Series 6239 ZIF Right Angle SMT One-Touch Lock/
Flip-Top (Bottom Contact) ORDERING CODE
04 6239 0XX 001 800
NUMBER OF POSITIONS (05-30)

TAPE AND REEL

Specifications
A = 0.5N + 2.1
• Number of Positions – 5-30
B = 0.5 (N-1)
• 2000 Connectors per Tape & Reel
C = 0.5 + 5.8
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage – 200V rms/min.
• Operating Temperature – (-20°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – nylon 46, natural color
• Slider Material – PPS, natural color
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 1.50mm (0.059")

Series 6240
ZIF Right Angle SMT One-Touch Lock/Flip-Top (Bottom Contact)
ORDERING CODE
04 6240 0XX 003 800
NUMBER OF POSITIONS (30-50)

A = 0.5N + 4.0 TAPE AND REEL

B = 0.5 (N-1) Specifications
C = 0.5 + 6.2
• Number of Positions – 30-50
• 2000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage – 200V rms/min.
• Operating Temperature – (-40°C - +85°C)
• Contact Material – phosphor bronze (tin-lead plated)
• Insulator Material – PPS, natural color
• Slider Material – PPS, natural color
• FFC/FPC Thickness – 0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 2.00mm (0.077")

Series 6244 LIF Straight SMT

ORDERING CODE
04 6244 0XX 000 800
NUMBER OF POSITIONS
(12, 14, 20, 22)

TAPE AND REEL

Specifications
• Number of Positions – 12, 14, 20, 22
• 1000 Connectors per Tape & Reel
• Voltage – 50 V
• Current Rating – 0.4 amp max.
• Dielectric Withstanding Voltage – 200V rms/min.
A = 0.5N + 2.1 • Operating Temperature – (-40°C - +85°C)
B = 0.5 (N-1) • Contact Material – phosphor bronze (tin-lead plated)
C = 0.5N + 0.6 • Insulator Material – nylon 46, natural color
(UL 94 V-O)
• FFC/FPC Thickness –0.3 ±0.05mm (0.012 ±0.002")
• Profile Height – 4.1mm (0.161")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #299. Visit our website http://www.avxcorp.com

ELCO 299
IDC (Insulation Displacement Connectors) Overview

IDC for 1.27mm (0.050") Round Conductor Flat Cable

Header Low Profile Card 2 Row 4 Row DIL Male IDC DIN Plug &
No. of Positions Socket Latched Header Edge Transition Transition Plug Plug 41612 Harness
Series Series Series Series Series Series Series Series Series Series Series
8290 8289 8380 8383 6338 8399 8292 8291 8293 8459 8005
SMT
2 d
4
6 s
8 d
9
10 d d d d d d d d
12
14 d d d d d d d
15
16 d d d d d d d d d
20 d d d d d d d d
24
25
26 d d d d d d d d
30
32 d
34 d d d d d d d d
36 d d
37
40 d d d d d d d d
44 d d
50 d d d d d d d d
52
56
60 d d d d d d d d
64 d d d d d d
Accessories
Strain Relief d d d d d
Coding Key d d d
Polarizing Key d d d
Latch / Eject d d s
Tooling
Base Plate d d d d d d d
Hand Tool d d d d d s
Bench Press d d d d d d d
Semi-Automatic d d d
Fully Automatic d s s
Options
PCB Retention s s s s s

Available d Consult Sales s

IDC for 2.54mm (0.100")

Round Conductor Flat Cable Compatibility & Approvals
• UL
No. of Positions Socket Header
• CSA
Series Series
• Intermateable and interchangeable
8284 8284
8 d d
with many other manufacturers
14 d d • Compatible with MIL-83503 product
16 d d
18 d d
20 d d
24 d d

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #300. Visit our website http://www.avxcorp.com

300 ELCO
2 Position Miniature IDC
Series 8005 Plug Harness (Wire to Board)

L1 (WIRE LENGTH)
II I
L2
(STRIP)
3
1.91

3 = Wire AWG #32/#30, UL Style 1571

1.55
ORDERING CODE
MAX. 0.5 MAX. 97 8005 002 XXX 867
(CUT OF
WIRE) FINISH
0.8 0.25 867 = 15 Micro-inches Au
MAX.
0.5 0.51 MAX. SERIES VARIATION
1.27
1.52 Contact Sales Office to order
STYLE, Harness Assembly
4.83 NO. OF
PLUG Wire Color L1 L2 AWG
POSITIONS
HARNESS
I
Specifications
• Number of Positions – 2
II
• Contact Spacing – 1.27 mm
• Current Rating – 1 amp. max.
Specifications to be supplied
• Voltage Rating – 30V max. by customer.
• Dielectric Withstanding Voltage – 500V rms/min. 32 AWG is the preferred option.
• Operating Temperature – -55 to +85°C Wire size must be same as I and II.

Series 8005 Receptacle

Right Angle
2.87 ORDERING CODE
2.27 24 8005 X02 100 867
FINISH
867 = 15 Micro-
1.75 1.9 inches Au
VARIATION
STYLE, NO. OF POSITIONS
SERIES 002 = Vertical - 2 Position
1.27 0.1 502 = Right Angle - 2 Position
TAPE AND REEL

4.83
3.34

2.52
Vertical
1.92
2.0

1.0 0.73 0.88

0.45 1.27
0.3 1.52 4.83
3.8 ±0.1 3.5

2.25
1.65

1.2
1.75
4.83

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #301. Visit our website http://www.avxcorp.com

ELCO 301
2 Position Miniature IDC
Series 8015 Plug Harness with Polarization

II I 1 L1
L2

1.91 3

1 = Insulator 61 8015 002 000 00X

2 X = Color Code (Option)
1.55
MAX. 0 = Standard = Natural (White)
0.5 MAX.
(CUT OFF) 1 = Black
0.5 4 = Brown
1.27 0.25
2 = Contact 71 8015 999 000 894
0.51 MAX.
2.02
3 = Wire AWG #30, UL Style 1571
4.83
ORDERING CODE
97 8015 002 XXX 894
FINISH
Specifications 894 = Au Flash Over Ni
• Number of Positions – 2 SERIES VARIATION
• Contact Spacing – 1.27 mm Contact Sales Office to order
NO. OF Harness Assembly
• Current Rating – 1 amp. max. POSITIONS
• Voltage Rating – 30V max. PLUG Wire Color L1 L2
HARNESS
• Dielectric Withstanding Voltage – 500V rms/min. I
• Operating Temperature – -55 to +80°C
II

Specifications to be supplied
Series 8015 Receptacle by customer.
Wire size must be same as I and II.

Vertical ORDERING CODE

24 8015 002 X01 894
0.5
FINISH
894 = Au Flash over Ni

VARIATION
NO. OF POSITIONS 001 = Color White
SERIES 101 = Color Black
401 = Color Brown
TAPE AND REEL

1.27
3.7

4.83
3.5

2.25
1.65

4.2 0.1 1.75

2.8

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #302. Visit our website http://www.avxcorp.com

302 ELCO
IDC (Insulation Displacement Connectors)
Series 2026 - Ribbon Cable
Ordering Code for 1.27mm (0.050") Pitch Cable
No. of Dim. A
Conductors Color Reference Number millimeters (inches)
9 Grey 90-2026-7049-01-000 10.16 (0.400)
9 Rainbow 90-2026-7048-01-000 10.16 (0.400)
10 Grey 90-2026-7021-01-000 11.43 (0.450)
10 Rainbow 90-2026-7020-01-000 11.43 (0.450)
14 Grey 90-2026-7017-01-000 16.51 (0.650)
14 Rainbow 90-2026-7016-01-000 16.51 (0.650)
15 Grey 90-2026-7051-01-000 17.78 (0.700)
15 Rainbow 90-2026-7050-01-000 17.78 (0.700)
16 Grey 90-2026-7015-01-000 19.05 (0.750)
16 Rainbow 90-2026-7014-01-000 19.05 (0.750)
20 Grey 90-2026-7013-01-000 24.13 (0.950)
20 Rainbow 90-2026-7012-01-000 24.13 (0.950)
25 Grey 90-2026-7053-01-000 30.48 (1.200)
25 Rainbow 90-2026-7052-01-000 30.48 (1.200)
Ordering Code for 2.54mm (0.100") 26 Grey 90-2026-7011-01-000 31.75 (1.250)
26 Rainbow 90-2026-7010-01-000 31.75 (1.250)
Pitch Cable 34 Grey 90-2026-7009-01-000 41.91 (1.650)
Reference Number No. of Positions Color 34 Rainbow 90-2026-7008-01-000 41.91 (1.650)
90-2026-7101-00-000 8 position Grey 37 Grey 90-2026-7055-01-000 45.72 (1.800)
90-2026-7094-00-000 14 position Grey 37 Rainbow 90-2026-7054-01-000 45.72 (1.800)
90-2026-7106-00-000 16 position Grey 40 Grey 90-2026-7007-01-000 49.53 (1.950)
90-2026-7095-00-000 18 position Grey 40 Rainbow 90-2026-7006-01-000 49.53 (1.950)
90-2026-7107-00-000 20 position Grey 50 Grey 90-2026-7005-01-000 62.23 (2.450)
90-2026-7096-00-000 24 position Grey 50 Rainbow 90-2026-7004-01-000 62.23 (2.450)
For use with Series 8284 only. 60 Grey 90-2026-7003-01-000 74.93 (2.950)
60 Rainbow 90-2026-7002-01-000 74.93 (2.950)
64 Grey 90-2026-7001-01-000 80.01 (3.150)
64 Rainbow 90-2026-7000-01-000 80.01 (3.150)

Series 6338 - Card Edge Connector

ORDERING CODE
00 6338 0XX 000 0X X
VARIATION INSULATOR
END FLANGES
0 = No end flanges
1 = Half end flanges
2 = Full end flanges
PLATING
02 = Selective Plating
30µ Gold
04 = Selective Plating
10µ Gold
STRAIN RELIEF
000 = Without strain relief*

NUMBER OF POSITIONS
SERIES NUMBER
CONNECTOR CODE PREFIX

*NB: For optional strain relief version,

please contact the local sales office.
Dimensions: millimeters (inches)
No. of
A B C D E F G H J
Positions
010 43.69 (1.720) 35.56 (1.400) 9 11.43 (0.450) 24.36 (0.960) 38.10 (1.500) 33.02 (1.300) 15.11 (0.595) 15.34 (0.604)
016 51.31 (2.020) 43.18 (1.700) 15 19.05 (0.750) 31.98 (1.260) 45.72 (1.800) 40.64 (1.600) 22.73 (0.895) 22.96 (0.904)
020 56.39 (2.220) 48.26 (1.900) 19 24.13 (0.950) 37.06 (1.460) 50.80 (2.000) 45.72 (1.800) 27.81 (1.095) 28.04 (1.104
026 64.01 (2.520) 55.88 (2.200) 25 31.75 (1.250) 44.68 (1.760) 58.42 (2.300) 53.34 (2.100) 35.43 (1.395) 35.66 (1.404)
034 74.17 (2.920) 66.04 (2.600) 33 41.91 (1.650) 54.84 (2.160) 68.58 (2.700) 63.50 (2.500) 45.59 (1.795) 45.82 (1.804)
040 81.79 (3.220) 73.66 (2.900) 39 49.53 (1.950) 62.46 (2.460) 76.20 (3.000) 71.12 (2.800) 53.21 (2.095) 53.44 (2.104)
044 86.87 (3.420) 78.74 (3.100) 43 54.61 (2.150) 67.54 (2.660) 81.28 (3.200) 76.20 (3.000) 58.29 (2.295) 58.52 (2.304)
050 94.49 (3.720) 86.36 (3.400) 49 62.23 (2.450) 75.16 (2.960) 88.90 (3.500) 83.82 (3.300) 65.91 (2.595) 66.14 (2.604)
060 107.19 (4.220) 99.06 (3.900) 59 74.93 (2.950) 87.86 (3.460) 101.60 (4.000) 96.52 (3.800) 78.61 (3.095) 78.84 (3.104)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #303. Visit our website http://www.avxcorp.com

ELCO 303
IDC (Insulation Displacement Connectors)
Series 8291 – Low Profile Dip Plug
ORDERING CODE
00 8291 0XX 00X 0XX
PLATING VARIATION
010 = Plating Gold
020 = Plating Tin

PCB THICKNESS
001 = Suitable for
1.6mm PCB
002 = Suitable for
3.2mm PCB
NUMBER OF POSITIONS
014 = 14 Way
016 = 16 Way
SERIES NUMBER
CONNECTOR CODE PREFIX

Dimensions: millimeters (inches)

No. of
A B C
Positions
014 15.24 (0.600) 19.35 (0.762) 3.30 (0.130) or 4.06 (0.160)
016 17.78 (0.700) 21.89 (0.862) 3.30 (0.130) or 4.06 (0.160)

Series 8284 – Single Row Plug

ORDERING CODE
10 8284 0XX 0XX 0XX
PLATING VARIATION
030 = Tin plating, 10 cycles
040 = Gold plating, 50 cycles

CONTACT VARIATION
000 = 0.110" (2.8mm) Straight PC Tail
001 = 0.146" (3.7mm) Straight PC Tail
002 = 0.110" (2.8mm) R.A. PC Tail
003 = 0.146" (3.7mm) R.A. PC Tail
009 = 0.209" (5.3mm) Straight PC Tail
NUMBER OF POSITIONS
008 = 8 position
014 = 14 position
SERIES 016 = 16 position
NUMBER 018 = 18 position
020 = 20 position
024 = 24 position

CONNECTOR CODE PREFIX

10 = Header Connector

Dimensions: millimeters (inches)

No. of A B C D E F G
Positions
8 7 17.78 (0.700) 21.30 (0.840) 18.54 (0.730) 19.30 (0.760) 23.70 (0.930) 17.54 (0.690)
14 13 33.02 (1.300) 36.54 (1.440) 33.78 (1.330) 34.54 (1.360) 38.94 (1.530) 32.78 (1.290)
16 15 38.10 (1.500) 42.22 (1.660) 38.86 (1.530) 39.62 (1.560) 44.02 (1.730) 37.86 (1.490)
18 17 43.18 (1.700) 46.70 (1.840) 43.94 (1.730) 44.70 (1.760) 49.10 (1.930) 42.94 (1.690)
20 19 48.26 (1.900) 52.38 (2.060) 49.02 (1.930) 49.78 (1.960) 54.18 (2.130) 48.02 (1.890)
24 23 58.42 (2.300) 61.94 (2.440) 59.18 (2.330) 59.94 (2.360) 64.34 (2.530) 58.18 (2.290)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #304. Visit our website http://www.avxcorp.com

304 ELCO
IDC (Insulation Displacement Connectors)
Series 8284 – Single Row Receptacle
ORDERING CODE
20 8284 0XX 000 0XX
PLATING VARIATION
030 = Tin Plating,
10 cycles
040 = Gold Plating,
50 cycles

CONTACT VARIATION
000 = Standard IDC
contact 26/28 AWG

NUMBER OF POSITIONS
Dimensions: millimeters (inches) 008 = 8 position
014 = 14 position
No. of SERIES 016 = 16 position
A B C D E F
Positions NUMBER 018 = 18 position
8 7 17.78 (0.700) 21.30 (0.840) 18.54 (0.720) 19.30 (0.760) 23.70 (0.930) 020 = 20 position
14 13 33.02 (1.180) 36.54 (1.450) 33.78 (1.330) 34.54 (1.360) 38.94 (1.530) 024 = 24 position
CONNECTOR
16 15 38.10 (1.500) 42.22 (1.660) 38.86 (1.530) 39.62 (1.560) 44.02 (1.730)
CODE PREFIX
18 17 43.18 (1.700) 46.70 (1.840) 43.94 (1.730) 44.70 (1.760) 49.10 (1.930)
20 = Socket Connector
20 19 48.26 (1.900) 52.38 (2.060) 49.02 (1.930) 49.78 (1.960) 54.18 (2.130)
24 23 58.42 (2.300) 61.94 (2.440) 59.18 (2.330) 59.94 (2.360) 64.34 (2.530)

Series 8289 – Ejector Style Header

ORDERING CODE
00 8289 0XX 0XX X X X
POLARIZATION
1 = Type A BS9525 & BT224
SERIES Dual Height molding in
NUMBER polarizing key/keys
3 = No Polarizing key/keys -
Standard
PLATING
CONNECTOR 1 = Selective Plating 30µ
Dimensions: millimeters (inches) CODE PREFIX Gold over Nickel
00 = Standard 4 = Selective Plating 10µ
No. of Gold over Nickel
A B C D
Positions
LATCH/EJECT LEVER
10 10.16 (0.040) 21.84 (0.860) 27.94 (1.100) 32.11 (1.260) NUMBER OF POSITIONS
0 = No Latch/Eject Lever
14 15.24 (0.060) 26.92 (1.060) 33.02 (1.300) 37.19 (1.460) 010 = 10 position
014 = 14 position 1 = Latch/Eject Lever for use with
16 17.78 (0.070) 29.46 (1.160) 35.56 (1.400) 39.73 (1.560)
016 = 16 position Series 8290 with strain relief
20 22.86 (0.090) 34.54 (1.360) 40.64 (1.600) 44.81 (1.760)
020 = 20 position 2 = Latch/Eject Lever for use with
26 30.48 (1.200) 42.16 (1.660) 40.64 (1.900) 52.43 (2.060)
026 = 26 position Series 8290 without strain relief
34 40.64 (1.600) 52.32 (2.060) 58.42 (2.300) 62.59 (2.460) 034 = 34 position
40 48.26 (1.900) 59.94 (2.360) 66.04 (2.600) 70.21 (2.760) CONTACT TERMINATION
040 = 40 position
50 60.96 (2.400) 72.64 (2.860) 78.74 (3.100) 82.91 (3.260) 002 = Straight PC Tail for 2.4mm
050 = 50 position
PCB - 3.60mm (0.142")
60 73.66 (2.900) 85.34 (3.360) 91.44 (3.600) 95.61 (3.760) 060 = 60 position
004 = Right Angle PC Tail for 2.4mm
64 78.74 (3.100) 90.42 (3.560) 96.52 (3.800) 100.69 (3.960) 064 = 64 position
PCB - 3.60mm (0.142")
006 = Straight PC Tail for 1.6mm
PCB - 2.80mm (0.110")
007 = Right Angle PCB Tail for 1.6mm
PCB - 2.80mm (0.110")
Additional information on this product is available from AVX’s catalog
Additional
or AVX’s
information
FAX Service. 009AVX’s
on this product is available from = Press-Fit
catalogPCorTail 2.4/3.2mm
AVX’s FAX Service.
Call 1-800-879-1613 and request document #305. Visit our website Call 1-800-879-1613 and request document #305. Visit ourPCB
http://www.avxcorp.com - 5.3mm
website (0.209")
http://www.avxcorp.com

ELCO 305
IDC (Insulation Displacement Connectors)
Series 8290 – Low Profile Receptacle
ORDERING CODE
00 8290 0XX 00X 0X X
POLARIZATION
1 = With central
polarizing boss
2 = Without central
polarizing boss

PLATING
SERIES 01 = 30µ Gold over Nickel
NUMBER 04 = 10µ Gold over Nickel

STRAIN RELIEF
CONNECTOR
000 = Without strain relief
CODE PREFIX
(feedthru) Standard
001 = With strain relief
NUMBER OF (feedthru) Standard
POSITIONS
006 = With latching strain relief
010 = 10 position 040 = 40 position (feedthru)
014 = 14 position 044 = 44 position*
016 = 16 position 050 = 50 position
020 = 20 position 060 = 60 position
026 = 26 position 064 = 64 position
034 = 34 position
*44 position connector is only available without
strain relief - consult sales office for availability.

Dimensions: millimeters (inches)

No. of No. of
A B A B
Positions Positions
10 17.22 (0.680) 10.16 (0.400) 40 55.32 (2.180) 48.26 (1.900)
14 22.30 (0.880) 15.24 (0.600) 44 60.40 (2.380) 53.34 (2.100)
16 24.84 (0.980) 17.78 (0.700) 50 68.02 (2.680) 60.69 (2.390)
20 29.92 (1.180) 22.86 (0.900) 60 80.72 (3.180) 73.66 (2.900)
26 37.54 (1.480) 30.48 (1.200) 64 85.80 (3.380) 78.74 (3.100)
34 47.70 (1.880) 40.64 (1.600)

Series 8292 – Transition Connector

ORDERING CODE
00 8292 0XX 00X 010
PLATING
010 = Tin alloy

PCB THICKNESS
001 = Suitable for
1.6mm PCB
002 = Suitable for
3.2mm PCB

NUMBER OF POSITIONS
010 = 10 position
016 = 16 position
020 = 20 position
SERIES
026 = 26 position
NUMBER
034 = 34 position
To suit E 040 = 40 position
1.60 PCB 2.54 050 = 50 position
3.20 PCB 3.94 CONNECTOR 060 = 60 position
CODE PREFIX

Dimensions: millimeters (inches)

No. of Positions A B C D
10 17.78 (0.700) 19.08 (0.750) 9 11.43 (0.450)
16 25.40 (1.000) 26.70 (1.050) 15 19.05 (0.750)
20 30.48 (1.200) 31.78 (1.250) 19 24.13 (0.950)
26 38.10 (1.500) 39.40 (1.550) 25 31.75 (1.250)
34 48.26 (1.900) 49.56 (1.950) 33 41.91 (1.650)
40 55.88 (2.200) 57.18 (2.250) 39 49.53 (1.950)
50 68.58 (2.700) 69.88 (2.750) 49 62.23 (2.450)
60 81.28 (3.200) 82.58 (3.250) 59 74.94 (2.950)
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #306. Visit our website http://www.avxcorp.com

306 ELCO
IDC (Insulation Displacement Connectors)
Series 8293 – Male Plug Connector
ORDERING CODE
XX 8293 0XX 00X 0X X
POLARIZATION
0 = No Polarizing
2 = Dual Height Type A

PLATING VARIATION
01 = Standard 30µ
Gold over Nickel
SERIES 03 = 10µ Gold over Nickel
NUMBER
ASSEMBLY VARIATION
000 = Connector
CONNECTOR without strain relief
CODE PREFIX 001 = Connector
10 = Standard with strain relief
Connector
Assembly with NUMBER OF POSITIONS
mounting flange 010 = 10 position 034 = 34 position
11 = Standard 014 = 14 position 040 = 40 position
Connector 016 = 16 position 050 = 50 position
Assembly without 020 = 20 position 060 = 60 position
Dimensions: millimeters (inches) mounting flange 026 = 26 position 064 = 64 position

No. of No. of
A B C D E A B C D E
Positions Positions
10 22.89 (0.901) 4 10.16 (0.400) 30.48 (1.200) 38.10 (1.500) 34 53.37 (2.101) 16 40.64 (1.600) 60.96 (2.400) 68.58 (2.700)
14 27.97 (1.101) 6 15.24 (0.600) 35.56 (1.400) 43.18 (1.700) 40 60.99 (2.401) 19 48.26 (1.900) 68.58 (2.700) 76.20 (3.000)
16 30.51 (1.201) 7 17.78 (0.700) 38.10 (1.500) 45.72 (1.800) 50 73.69 (2.901) 24 60.96 (2.400) 81.28 (3.200) 88.90 (3.500)
20 35.59 (1.401) 9 22.86 (0.900) 43.18 (1.700) 50.80 (2.000) 60 86.39 (3.401) 29 73.66 (2.900) 93.98 (3.700) 101.60 (4.000)
26 43.21 (1.701) 12 30.48 (1.200) 50.80 (2.000) 56.59 (2.228) 64 91.47 (3.601) 31 78.74 (3.100) 98.74 (3.900) 106.68 (4.200)

Series 8380 – Low Profile Box Receptacle

ORDERING CODE
00 8380 0XX 00X 0X X
POLARIZATION
0 = No Polarizing
Keys Standard
2 = Type B -
Dual Height
molded in
SERIES polarizing key(s)
NUMBER
PLATING VARIATION
01 = 30µ Gold Nickel Solder
04 = 10µ Gold over Nickel

CONNECTOR
CONTACT VARIATION
CODE PREFIX
000 = Solder Tail Straight Contact
00 = Standard
for 1.6mm PCB - Contact
Connector
Length (2.8)
Assembly
001 = Solder Tail Straight Contact
for 2.4mm PCB - Contact
NUMBER OF Length (3.6)
POSITIONS 002 = Solder Tail Right Angle
010 = 10 position
014 = 14 position Contact for 1.6mm PCB -
016 = 16 position Contact Length (2.8)
020 = 20 position 003 = Solder Tail Right Angle
026 = 26 position Contact for 2.6mm PCB -
034 = 34 position Contact Length (3.6)
040 = 40 position 009 = Press-Fit Contact for
050 = 50 position 2.4/3.2 PCB - Contact
060 = 60 position Length (5.3)
Dimensions: millimeters (inches) 064 = 64 position
NB: Additional plating and tail lengths are available.
No. of No. of Consult sales office for availability.
A B C A B C
Positions Positions
10 17.90 (0.705) 4 10.16 (0.400) 34 48.38 (1.905) 16 40.64 (1.600)
14 22.98 (0.905) 6 15.24 (0.600) 40 56.00 (2.205) 19 48.26 (1.900)
16 25.52 (1.000) 7 17.78 (0.700) 50 68.70 (2.705) 24 60.96 (2.400)
20 30.60 (1.200) 9 22.86 (0.900) 60 81.40 (3.205) 29 73.66 (2.900)
26 38.22 (1.500) 12 30.48 (1.200) 64 86.48 (3.405) 31 78.74 (3.100)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #307. Visit our website http://www.avxcorp.com

ELCO 307
IDC (Insulation Displacement Connectors)
Series 8383 – Surface Mount Box Header
ORDERING CODE
00 8383 0XX 00X 0 X 0
POLARIZATION
0 = No Polarizing
SERIES
NUMBER PLATING
VARIATION
CONNECTOR 1 = 30µ Gold
CODE PREFIX over Nickel
00 = Standard 4 = 10µ Gold
Connector over Nickel
Assembly
CLIP VARIATION
NUMBER OF 0 = No Clip
POSITIONS
010 = 10 position CONTACT VARIATION
014 = 14 position 000 = Solder PC Straight
(1.60mm PCB) Length 2.90mm
016 = 16 position
001 = Solder PC Right Angle
020 = 20 position
(2.40mm PCB) Length 3.70mm
026 = 26 position
002 = Solder PC Right Angle
034 = 34 position
(1.6mm PCB) Length 2.90mm
040 = 40 position
Dimensions: millimeters (inches)
050 = 50 position
003 = Solder PC Straight
No. of Positions A B C (2.40mm PCB) Length 3.70mm
060 = 60 position
10 17.90 (0.705) 4 10.16 (0.400) 009 = Press-Fit Contact for 2.4/3.2mm
064 = 64 position
14 22.98 (0.905) 6 15.24 (0.600) PCB or contact length 5.3mm
16 25.52 (1.000) 7 17.78 (0.700)
20 30.60 (1.200) 9 22.86 (0.900)
26 38.22 (1.500) 12 30.48 (1.200)
34 48.38 (1.900) 16 40.64 (1.600)
40 56.00 (2.200) 19 48.26 (1.900)
50 68.70 (2.700) 24 60.96 (2.400)
60 81.40 (3.200) 29 73.66 (2.900)
64 86.48 (3.200) 31 78.74 (3.100)

Series 8399 – Dual-in-Line Transition Connector

With Strain Relief
ORDERING CODE
00 8399 0XX 0X X X 02
PLATING
02 = Tin Lead
SERIES
NUMBER
CONTACT
CONNECTOR 2 = 3.6mm tail
CODE PREFIX phosphor
00 = Standard bronze
Without Strain Relief NUMBER OF 3 = 2.8mm tail
POSITIONS phosphor
010 = 10 position bronze
014 = 14 position
CABLE STOP
016 = 16 position
0 = Without cable
020 = 20 position
stop Standard
026 = 26 position
1 = With cable stop
Dimensions: millimeters (inches) 034 = 34 position
Special
040 = 40 position
No. of Positions A B P C STRAIN RELIEF
050 = 50 position
010 18.45 (0.726) 10.16 (.400) 4 20.27 (0.798) 00 = Without strain relief
060 = 60 position
014 23.53 (0.926) 15.24 (.600) 6 25.65 (1.01) 01 = With strain relief
064 = 64 position
016 26.07 (1.03) 17.78 (.700) 7 28.19 (1.11)
020 31.15 (1.23) 22.86 (.900) 9 33.27 (1.31)
026 38.77 (1.53) 30.48 (1.20) 12 40.89 (1.61)
034 48.93 (1.93) 40.64 (1.60) 16 51.05 (2.01)
040 56.55 (2.23) 48.26 (1.90) 19 58.67 (2.31)
050 69.25 (2.73) 60.96 (2.40) 24 71.37 (2.81)
060 81.95 (3.23) 73.66 (2.90) 39 84.07 (3.31)
064 87.03 (3.42) 78.74 (3.10) 31 89.15 (3.51)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #308. Visit our website http://www.avxcorp.com

308 ELCO
IDC (Insulation Displacement Connectors)
Series 8459 – IDC DIN Connector

ORDERING CODE
20 8459 0XX 00X 0XX
PLATING GOLD OVER
NICKEL
Dimensions: millimeters (inches) 002 = DIN Class III
Insulator Size A B C D E F G 026 = Class II
050 = Class I
048 position (3 x 16) 54.90 50.00 15 38.10 60.00 31 39.37
(2.16) (1.97) (1.50) (2.36) (1.55) VARIATION
096 position (3 x 32) 94.90 90.00 31 78.74 100.00 63 80.01 001 = With strain relief
(3.74) (3.54) (3.10) (3.94) (3.15) 002 = Without strain relief
INSULATOR SIZE
048 or 096 (See note)
SERIES NUMBER

CONNECTOR CODE PREFIX

Note: 96 position insulator fitted with 2 rows

of 32 positions, rows A and C.
48 position insulator fitted with 2 rows
of 16 positions, rows A and C.

Customer Application Tooling

Toggle Press Pneumatic

Technical Data Technical Data

Force output max. 12 kN (2600 lbs) Force output max. 15 kN (3300 lbs)
Stroke 45mm (1.8 in) Stroke Factory Set
Working height adjustable 120-360mm (5-14 in) Air consumption (per stroke) 0.12scf/in (3.0 litre/cm)
Overhang 86mm (3.4 in) Working height adjustable 3.5-8 in (90-210mm)
Ram bore dia 10 H 7 x 28mm (1/2 x 1 in) Overhang 3.4 in (86mm)
Ram dia 32mm (1 1/4 in) Ram dia 1.57 in (40mm)
Table bore dia 20 H 7mm (0.787 in) Ram bore dia with fixation screw M10 5/8 x 2 in (20 H7 x 50mm)
Table dimension 185 x 115mm (7 x 4.5 in) Breadth of T-slot 0.394 in (10 H 9mm)
Breath of T-slot 10 H 9mm (0.394 in) Table bore dia 0.787 in (20 H 7mm)
Weight 30kg (66 lbs) Table dimension 6 x 4 in (150 x 110mm)
Space requirement 6 x 10 in (155 x 260mm)
Non-metric dimensions are for U.S. versions only.
Air connection thread R 1/4 in
Weight 45kg (100 lbs)
Non-metric dimensions are for U.S. versions only.

Ordering Code Ordering Code

Toggle Press Ordering Code 06 8290 7225 00 000 Pneumatic Press Ordering Code 06 8290 7207 00 000
Platen Ordering Code Platen Ordering Code
Series 8290 socket 06 8290 7207 01 000 Series 8290 socket 06 8290 7207 01 000
DIL transition connectors 06 8399 7009 00 000 DIL transition connectors 06 8399 7009 00 000
Staggered transition connectors 06 8292 7010 00 000 Straggered transition connectors 06 8292 7010 00 000
Card edge connectors 06 6338 7116 00 000 Card edge connectors 06 6338 7116 00 000
DIL 14/16 connectors 06 8291 7009 00 000 DIL 14/16 connectors 06 8291 7009 00 000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #309. Visit our website http://www.avxcorp.com

ELCO 309
Rack and Panel Connectors - Varicon®
Series 8014 – 64 Contact Center-Screw Type Plug
ORDERING CODE
10 8014 264 X00 X00
FINISH COLOR
000 = without cover,
center-screw,
green insulator
100 = with cover,
center-screw,
green insulator
CONTACT
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
NUMBER OF POSITIONS
264 = 64
SERIES
TAPE AND REEL
10 = Plug

4.0mm Pitch

Series 8014 – 64 Contact Center-Screw Type Receptacle

ORDERING CODE
20 8014 264 XXX X00
FINISH COLOR
000 = R/A through hole,
center lock nut,
green insulator
100 = ST through hole,
center lock nut,
green insulator
CONTACT
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
999 = Right angle through hole
NUMBER OF POSITIONS
264 = 64
SERIES
TAPE AND REEL
20 = Receptacle

4.0mm Pitch

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #310. Visit our website http://www.avxcorp.com

310 ELCO
Rack and Panel Connectors - Varicon®
Series 8014 – 50 Contact Side-Screw Plug
ORDERING CODE
10 8014 350 X00 XXX
FINISH COLOR
028 = Side-screw,
gray insulator
128 = Side-screw,
gray insulator
with cover
(038 = Side-short-screw,
gray insulator. . . .
special)
CONTACT
000 = No contact loaded
100 = Wire crimp contact
(loose pieces attached)
200 = Straight through hole
NUMBER OF POSITIONS
350 = 50
SERIES
TAPE AND REEL
10 = Plug

4.0mm Pitch

Series 8014 – 50 Contact Side-Screw Receptacle

ORDERING CODE
20 8014 350 999 028
FINISH COLOR
028 = Side-screw,
gray insulator
CONTACT
999 = Right angle through hole
NUMBER OF POSITIONS
350 = 50
SERIES
TAPE AND REEL
20 = Receptacle

4.0mm Pitch

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #311. Visit our website http://www.avxcorp.com

ELCO 311
Rack and Panel Connectors - Varicon®
Series 8014 – Crimp Contact
ORDERING CODE
70 8014 000 000 858
FINISH COLOR
858 = 10 microinches
gold over nickel
plate

Series 8014 – Cover 64 Contact Center-Screw

Aluminum Die Cast ORDERING CODE
30 8014 001 000 225

Series 8014 – 50 Contact Side-Screw Plastic (gray) Cover

ORDERING CODE
30 8014 001 003 008

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #312. Visit our website http://www.avxcorp.com

312 ELCO
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 20 Way
Plug Plug Socket Socket Pin Layout
Actuating Fixed Actuating Fixed 20
Screw Nut Screw Nut Way

ORDERING CODE Connector Plug and Receptacle

00 8016 020 XXX 001 Combinations

007/507/607
008/508/608

909/509/609
910/510/610
911/511/611
912/512/612
Receptacle
Prefix Series Number of See
Number Positions Variation
Code Plug
Contact Termination 001/501/601
*000 = Contacts not fitted and ordered separately, 002/502/602
see page 22 for full list of options

217 = Solder 0.098" x 2.49mm

218 = Wire Wrap – 903/503/603

0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm 904/504/604
905/505/605
296 = Wire Wrap –
906/506/606
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm

504 = Solder Tail –

750 = Wire Wrap –

0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
Select variation code combinations marked with square in the table.
*Crimp contacts always ordered separately.

Variation Code
European Version USA Versions Cover
Insulator Grey Polyester Grey Polyester Green Polyester and Actu-
Body Aluminum No No No Cable ating Fixed
Type Cover Cover Cover Cover Cover Cover Entrance Screw Nut
— 001 — 501 601 None Yes No
Male — 002 — 502 602 None No Yes
(Exposed 903 — 503 603 Top* Yes No
Contacts) 904 — 504 604 Side* Yes No
905 — 505 605 Top* No Yes
906 — 506 606 Side* No Yes
— 007 507 607 None No Yes
Female — 008 508 608 None Yes No
(Recessed 909 — 509 — 609 — Top* Yes No
Contacts) 910 — 510 — 610 — Side* Yes No
911 — 511 — 611 — Top* No Yes
912 — 512 — 612 — Side* No Yes
*These covers should only be used with crimp contacts.
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #313. Visit our website http://www.avxcorp.com

ELCO 313
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 20 Way

Clamping and Cover Dimensions Recommended

Layout for Front
Chassis Mounting

Standard Covers
Cover Part Number Number Cable Clamp
European Version USA Version of Positions Entrance Description Size mm (inches)
30-8016-9829-20-000 30-8016-9829-00-0000 20 Side Standard 11.53 (0.454) Dia.
30-8016-9831-20-000 30-8016-9831-00-0000 20 Top Standard 11.53 (0.454) Dia.

Removable Side Plate Covers millimeters (inches)

Cover Number of Cable Clamp
Part Number Positions Entrance Description Minimum Size Maximum Size
30-8016-020-000-413 20 Side/Top Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-415 20 45° Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-423 20 Dual 90° Side/Top Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)
30-8016-020-000-425 20 Dual 45° Entry Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #314. Visit our website http://www.avxcorp.com

314 ELCO
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 38 Way
Plug Plug Socket Socket Pin Layout
Actuating Fixed Actuating Fixed 38
Screw Nut Screw Nut Way

ORDERING CODE Connector Plug and Receptacle

00 8016 038 XXX 001 Combinations

007/507/607
008/508/608

909/509/609
910/510/610
911/511/611
912/512/612

923/523/623
924/524/624
925/525/625
926/526/626

935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
Prefix Series Number of See
Number Positions Variation
Code Plug
Contact Termination 001/501/601
*000 = Contacts not fitted and ordered separately, 002/502/602
see page 22 for full list of options
903/503/603
217 = Solder 0.098" x 2.49mm 904/504/604
905/505/605
218 = Wire Wrap – 906/506/606

0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm 919/519/619

920/520/620
296 = Wire Wrap – 921/521/621
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm 922/522/622

504 = Solder Tail – 931/531/631

932/532/632
750 = Wire Wrap – 933/533/633
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm 934/534/634
Select variation code combinations marked with square in the table.
*Crimp contacts always ordered separately.

Variation Code
European Version USA ONLY Versions Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Aluminum Cover No Cover Aluminum Cover No Cover Aluminum Cover No Cover Entrance Screw Nut
Std. Large Ex-Large Std. Large Ex-Large Std. Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp
— — — 001 — — — 501 — — — 601 None Yes No
— — — 002 — — — 502 — — — 602 None No Yes
Male
(Exposed 903 919 931 — 503 519 531 — 603 619 631 — Top Yes No
Contacts) 904 920 932 — 504 520 532 — 604 620 632 — Side Yes No
905 921 933 — 505 521 533 — 605 621 633 — Top No Yes
906 922 934 — 506 522 534 — 606 622 634 — Side No Yes
— — 007 — — — 507 — — — 607 None No Yes
— — 008 — — — 508 — — — 608 None Yes No
Female 909 923 935 — 509 523 535 — 609 623 635 — Top Yes No
(Recessed 910 924 936 — 510 524 536 — 610 624 636 — Side Yes No
Contacts) 911 925 937 — 511 525 537 — 611 625 637 — Top No Yes
912 926 938 — 512 526 538 — 612 626 638 — Side No Yes

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #315. Visit our website http://www.avxcorp.com

ELCO 315
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 38 Way
Clamping and Cover Dimensions Recommended
Layout for Front
Chassis Mounting

Standard Covers
Cover Part Number Number of Cable Clamp
European Version USA Version Positions Entrance Description Size mm (inches)
30-8016-9821-20-000 30-8016-9821-00-0000 38 Side Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9822-20-000 30-8016-9822-00-0000 38 Top Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9825-20-000 30-8016-9825-00-0000 38 Side Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9826-20-000 30-8016-9826-00-0000 38 Top Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9838-20-000 30-8016-9838-00-0000 38 Side Extra-Large 20.83 X 15.60 (0.820 x 0.614)
30-8016-9839-20-000 30-8016-9839-00-0000 38 Top Extra-Large 20.83 X 15.60 (0.820 x 0.614)

Optional Removable Side Plate Cover

Removable Side Plate Covers millimeters (inches)

Cover Number of Cable Clamp
Part Number Positions Entrance Description Minimum Size Maximum Size
30-8016-038-000-413 38 Side/Top Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-038-000-415 38 45° Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-038-000-423 38 Dual 90° Side/Top Special 2- 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
30-8016-038-000-425 38 Dual 45° Entry Special 2- 6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #316. Visit our website http://www.avxcorp.com

316 ELCO
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 56 Way
Plug - Actuating Screw Socket - Actuating Screw Pin Layout
56
Way

Plug – Fixed Nut Socket – Fixed Nut

ORDERING CODE Connector Plug and Receptacle

00 8016 056 XXX 001 Combinations

008/508/608

909/509/609
910/510/610
911/511/611
912/512/612

923/523/623
924/524/624
925/525/625
926/526/626

935/535/635
936/536/636
937/537/637
938/538/638
007/507/607
Receptacle
Prefix Series Number of See
Number Positions Variation
Code Plug
Contact Termination 001/501/601
*000 = Contacts not fitted and ordered separately, 002/502/602
see page 22 for full list of options
903/503/603
217 = Solder 0.098" x 2.49mm 904/504/604
905/505/605
218 = Wire Wrap – 906/506/606
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
919/519/619
920/520/620
296 = Wire Wrap –
921/521/621
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm 922/522/622

504 = Solder Tail – 931/531/631

932/532/632
750 = Wire Wrap – 933/533/633
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm 934/534/634
Select variation code combinations marked with square in the table.
*Crimp contacts always ordered separately.

Variation Code
European Version USA ONLY Versions Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Aluminum Cover No Cover Aluminum Cover No Cover Aluminum Cover No Cover Entrance Screw Nut
Std. Large Ex-Large Std. Large Ex-Large Std. Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp
— — — 001 — — — 501 — — — 601 None Yes No
— — — 002 — — — 502 — — — 602 None No Yes
Male
(Exposed 903 919 931 — 503 519 531 — 603 619 631 — Top Yes No
Contacts) 904 920 932 — 504 520 532 — 604 620 632 — Side Yes No
905 921 933 — 505 521 533 — 605 621 633 — Top No Yes
906 922 934 — 506 522 534 — 606 622 634 — Side No Yes
— — 007 — — — 507 — — — 607 None No Yes
— — 008 — — — 508 — — — 608 None Yes No
Female 909 923 935 — 509 523 535 — 609 623 635 — Top Yes No
(Recessed 910 924 936 — 510 524 536 — 610 624 636 — Side Yes No
Contacts) 911 925 937 — 511 525 537 — 611 625 637 — Top No Yes
912 926 938 — 512 526 538 — 612 626 638 — Side No Yes

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #317. Visit our website http://www.avxcorp.com

ELCO 317
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 56 Way
Clamping and Cover Dimensions Recommended
Layout for Front
Chassis Mounting

Standard Covers
Cover Part Number Number of Cable Clamp
European Version USA Version Positions Entrance Description Size mm (inches)
30-8016-9823-20-000 30-8016-9823-00-0000 56 Side Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9824-20-000 30-8016-9824-00-0000 56 Top Standard 16.51 X 12.70 (0.650 x 0.500)
30-8016-9827-20-000 30-8016-9827-00-0000 56 Side Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9828-20-000 30-8016-9828-00-0000 56 Top Large 16.51 X 15.44 (0.650 x 0.608)
30-8016-9840-20-000 30-8016-9840-00-0000 56 Side Extra-Large 20.83 X 15.60 (0.820 x 0.614)
30-8016-9842-20-000 30-8016-9842-00-0000 56 Top Extra-Large 20.83 X 15.60 (0.820 x 0.614)

Optional Removable Side Plate Cover

Removable Side Plate Covers millimeters (inches)

Cover Number of Cable Clamp
Part Number Positions Entrance Description Minimum Size Maximum Size
30-8016-056-000-413 56 Side/Top Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-056-000-415 56 45° Standard 6 x 14 (0.236 x 0.551) 17 x 14 (0.669 x 0.551)
30-8016-056-000-423 56 Dual 90° Side/Top Special 2-6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
30-8016-056-000-425 56 Dual 45° Entry Special 2-6 x 14 (0.236 x 0.551) 2 - 17 x 14 (0.669 x 0.551)
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #318. Visit our website http://www.avxcorp.com

318 ELCO
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 90 Way
Plug - Actuating Screw Socket - Actuating Screw Pin Layout
90
Way

Plug – Fixed Nut Socket – Fixed Nut

ORDERING CODE Connector Plug and Receptacle

00 8016 090 XXX 1 Combinations

007/507/607
008/508/608

909/509/609
910/510/610
911/511/611
912/512/612

935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
Prefix Series Number of See
Number Positions Variation
Code Plug
Contact Termination 001/501/601
*000 = Contacts not fitted and ordered separately, 002/502/602
see page 22 for full list of options
903/503/603
217 = Solder 0.098" x 2.49mm 904/504/604
905/505/605
218 = Wire Wrap – 906/506/606
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
931/531/631
296 = Wire Wrap – 932/532/632
933/533/633
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm 934/534/634
504 = Solder Tail –

750 = Wire Wrap –

0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
Select variation code combinations marked with square in the table.
*Crimp contacts always ordered separately.

Variation Code
European Version USA ONLY Versions Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Cover Cover Cover No Cover Cover No Cover Entrance Screw Nut
Large Ex-Large Large Ex-Large Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp
— — 001 — — 501 — — 601 None Yes No
— — 002 — — 502 — — 602 None No Yes
Male
(Exposed 903 931 — 503 531 — 603 631 — Top Yes No
Contacts) 904 932 — 504 532 — 604 632 — Side Yes No
905 933 — 505 533 — 605 633 — Top No Yes
906 934 — 506 534 — 606 634 — Side No Yes
— — 007 — — 507 — — 607 None No Yes
— — 008 — — 508 — — 608 None Yes No
Female 909 935 — 509 535 — 609 635 — Top Yes No
(Recessed 910 936 — 510 536 — 610 636 — Side Yes No
Contacts) 911 937 — 511 537 — 611 637 — Top No Yes
912 938 — 512 538 — 612 638 — Side No Yes

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #319. Visit our website http://www.avxcorp.com

ELCO 319
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 90 Way
Clamping and Cover Dimensions Recommended
Layout for Front
Chassis Mounting

Standard Covers
Cover Part Number Number of Cable Clamp
European Version USA Version Positions Entrance Description Size mm (inches)
30-8016-9832-20-000 30-8016-9832-00-0000 90 Side Large 20.32 (0.800) Dia.
30-8016-9833-20-000 30-8016-9833-00-0000 90 Top Large 20.32 (0.800) Dia.
30-8016-9843-20-000 30-8016-9843-00-0000 90 Side Extra-Large 25.40 x 20.32 (1.00 x 0.008)
30-8016-9844-20-000 30-8016-9844-00-0000 90 Top Extra-Large 25.40 x 20.32 (1.00 x 0.008)

Optional Removable Side Plate Cover

Removable Side Plate Covers millimeters (inches)

Cover Number of Cable Clamp
Part Number Positions Entrance Description Minimum Size Maximum Size
30-8016-090-000-413 90 Side/Top Standard 7 x 21 (0.276) 21 x 21 (0.827 x 0.827)
30-8016-090-000-415 90 45° Standard 7 x 21 (0.276) 21 x 21 (0.827 x 0.827)
30-8016-090-000-423 90 Dual 90° Side/Top Special 2 - 7 x 21 (0.276) 2 - 21 x 21 (0.827 x 0.827)
30-8016-090-000-425 90 Dual 45° Entry Special 2 - 7 x 21 (0.276) 2 - 21 x 21 (0.827 x 0.827)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #320. Visit our website http://www.avxcorp.com

320 ELCO
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 120 Way
Plug - Actuating Screw Socket - Actuating Screw Pin Layout
120
Way

Plug – Fixed Nut Socket – Fixed Nut

ORDERING CODE Connector Plug and Receptacle

00 8016 120 XXX 001 Combinations

007/507/607
008/508/608

909/509/609
910/510/610
911/511/611
912/512/612

935/535/635
936/536/636
937/537/637
938/538/638
Receptacle
Prefix Series Number of See
Number Positions Variation
Code Plug
Contact Termination 001/501/601
*000 = Contacts not fitted and ordered separately, 002/502/602
see page 22 for full list of options
903/503/603
217 = Solder 0.098" x 2.49mm 904/504/604
905/505/605
218 = Wire Wrap – 906/506/606
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
931/531/631
932/532/632
296 = Wire Wrap –
933/533/633
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm 934/534/634

504 = Solder Tail –

750 = Wire Wrap –

0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
Select variation code combinations marked with square in the table.
*Crimp contacts always ordered separately.

Variation Code
European Version USA ONLY Versions Cover & Actu-
Insulator Grey Polyester Grey Polyester Green Polyester Cable ating Fixed
Body Type Cover Cover Cover No Cover Cover No Cover Entrance Screw Nut
Large Ex-Large Large Ex-Large Large Ex-Large
Clamp Clamp Clamp Clamp Clamp Clamp
— — 001 — — 501 — — 601 None Yes No
— — 002 — — 502 — — 602 None No Yes
Male
(Exposed 903 931 — 503 531 — 603 631 — Top Yes No
Contacts) 904 932 — 504 532 — 604 632 — Side Yes No
905 933 — 505 533 — 605 633 — Top No Yes
906 934 — 506 534 — 606 634 — Side No Yes
— — 007 — — 507 — — 607 None No Yes
— — 008 — — 508 — — 608 None Yes No
Female 909 935 — 509 535 — 609 635 — Top Yes No
(Recessed 910 936 — 510 536 — 610 636 — Side Yes No
Contacts) 911 937 — 511 537 — 611 637 — Top No Yes
912 938 — 512 538 — 612 638 — Side No Yes

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #321. Visit our website http://www.avxcorp.com

ELCO 321
Rack and Panel Connectors - Varicon®
Series 8016 – Rectangular Connector – 120 Way
Clamping and Cover Dimensions Recommended
Layout for Front
Chassis Mounting

Standard Covers
Cover Part Number Number of Cable Clamp
European Version USA Version Positions Entrance Description Size mm (inches)
30-8016-9834-20-000 30-8016-9834-00-0000 120 Side Large 20.32 x 27.43 (0.800 x 1.080)
30-8016-9835-20-000 30-8016-9835-00-0000 120 Top Large 20.32 x 27.43 (0.800 x 1.080)
30-8016-9845-20-000 30-8016-9845-00-0000 120 Side Extra-Large 27.94 x 27.56 (1.100 x 1.085)
30-8016-9846-20-000 30-8016-9846-00-0000 120 Top Extra-Large 27.94 x 27.56 (1.100 x 1.085)
NB: There are no removable side plate covers for the 120 Way version.

Contact Style Description Plating Specification Order Code

Crimp Contact 0.25µM Gold All Over (Standard) 60 8017 0313 00 339
* Loose 0.25µM Gold Nose & Tail (Optional) 60 8017 0313 00 042
Ordered separately

Crimp Contact End Carrier 0.25µM Gold All Over (Standard) 60 8017 0323 99 339
(1800 Contacts per reel) 0.25µM Gold Nose & Tail (Optional) 60 8017 0323 99 042
0.25µM Gold All Over (Standard) 60 8017 0323 00 339**
0.25µM Gold Nose & Tail (Optional) 60 8017 0323 00 042**
Ordered separately

Tail Section – 2.49 x 0.61 (0.098 x 0.024)

Solder Tag Contact 0.25µM Gold All Over (Standard) 60 8017 0513 00 339
*
If fitted type 217
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
14.4mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0613 00 339
If fitted type 218
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
19.3mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0623 00 339
If fitted type 750
Tail Section – 0.635 x 0.63 (0.025 x 0.005)
14.0 Miniwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0633 00 339
If fitted type 296
Tail Section – 0.635 x 0.63 (0.025 x 0.005)
4.3mm PC Solder Contact 0.25µM Gold All Over (Standard) 60 8017 0663 00 339
*If fitted type 504 for ø 1.00 mm P.T.H.

* Indicates standard contact / ** Order code to be used when purchasing through a USA source.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #322. Visit our website http://www.avxcorp.com

322 ELCO
Varicon®
Series 8017

Variation Code ORDERING CODE

00 8017 XXX XXX 0XX
Insulator Variation Cover &
Body Code Cable Actuating Fixed
Type No. Entrance Screw Screw
Prefix Series Number of See
001 No Yes No Number Positions Variation
002 No No Yes 75, 100, 130 Code
003 Top Yes No
Plug 004 Side Yes No Contact Code
005 Top No Yes 217 = Solder 0.098" x 2.49mm –
006 Side No Yes 60 8017 0513 00 339

Insulator Variation Cover & 218 = Wire Wrap –

Body Code Cable Fixed Actuating
Type No. Entrance Nut Nut
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
007 No Yes No 60 8017 0613 00 339
008 No No Yes
Receptacle 009 Top Yes No 750 = Wire Wrap –
010 Side Yes No 0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
011 Top No Yes
012 Side No Yes 60 8017 0623 00 339

296 = Wire Wrap –

0.025 x 0.026 x 0.579" / 0.64 x 0.66 x 14.7mm
75/100/130 Contacts 60 8017 0633 00 339

Plug with Plug with 000 = Wire Crimp (Contacts Loose) –

Actuating Screw 001 Fixed Screw 002 Must be ordered separately
60 8017 0313 00 339

000 = Wire Crimp (1800 Contacts on a Reel) –

60 8017 0323 00 339
Must be ordered separately

75 Contacts 100 Contacts

Plug Plug

Receptacle Receptacle
Receptacle with Receptacle with
Fixed Nut 007 Actuating Nut 008

130 Contacts
Plug

Receptacle

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #323. Visit our website http://www.avxcorp.com

ELCO 323
Varicon®
Series 8026 – 0.100" Rectangular Connector
Variation Codes
33 Contacts 75, 117 & 165 Contacts
Table 1 Table 3
Insulator Variation Variation Code No.
Body Code Actuating Fixed Keying Cover Insulator Cover Cover Cable Actuating Fixed Keying
Type No. Screw Nut Hardware Body Without Small Large Entrance Screw Nut Hardware
701 Yes No Yes No Type Cover Clamp Clamp
702 Yes No No No 701 — — No Yes No Yes
Male 703 No Yes Yes No 702 — — No Yes No No
(Exposed 704 No Yes No No 703 — — No No Yes Yes
Contacts) 733 No No Yes No 704 — — No No Yes No
734 No No No No 733 — — No No No Yes
801 No Yes Yes No 734 — — No No No No
802 No Yes No No — 705 713 Top Yes No Yes
Female 803 Yes No Yes No — 706 714 Side Yes No Yes
(Recessed 804 Yes No No No Male — 707 715 Top Yes No No
Contacts) 833 No No Yes No (Exposed — 708 716 Side Yes No No
834 No No No No Contacts) — 709 717 Top No Yes Yes
Table 2 — 710 718 Side No Yes Yes
Male 501 Yes No Yes No — 711 719 Top No Yes No
(Exposed 502 Yes No No No — 712 720 Side No Yes No
Contacts) 503 No Yes Yes No — 735 739 Top No No Yes
504 No Yes No No — 736 740 Side No No Yes
601 No Yes Yes No — 737 741 Top No No No
Female 602 No Yes No No — 738 742 Side No No No
(Recessed 603 Yes No Yes No 801 — — No No Yes Yes
Contacts) 604 Yes No No No 802 — — No No Yes No
803 — — No Yes No Yes
ORDERING CODE 804 — — No Yes No No
00 8026 033 XXX 803 833 — — No No No Yes
834 — — No No No No
— 805 813 Top No Yes Yes
— 806 814 Side No Yes Yes
Prefix Series Number of See Female — 807 815 Top No Yes No
Number Positions Variation (Recessed — 808 816 Side No Yes No
033 = 33 117 = 117 Code Contacts) — 809 817 Top Yes No Yes
075 = 75 165 = 165 Add 050 to order — 810 818 Side Yes No Yes
alternative keying — 811 819 Top Yes No No
Contact Code (Pin & Socket) — 812 820 Side Yes No No
000 = Crimp (3000 - contact reel) — 835 839 Top No No Yes
i.e. 701 = Standard — 836 840 Side No No Yes
Part Number hermaphroditic — 837 841 Top No No No
60 8216 0323 00 339 keying — 838 842 Side No No No
000 = Crimp (loose contact) Accepts #22-30 AWG wire 751 = Pin and socket
Part Number keying Table 4
60 8216 0313 00 339 Complete a 15 digit Variation Code No.
491 = Wire wrappable removable contact assembly number for Insulator Cover Cover Cable Actuating Fixed Keying
.025" (.635mm) sq. x .564" (14.33mm) tail each mating part, male Body Without Small Large Entrance Nut Screw Hardware
Part Number Type Cover Clamp Clamp
and female.
60 8216 0413 00 339 501 — — No Yes No Yes
502 — — No Yes No No
Order crimp contacts separately by Part Number. 503 — — No No Yes Yes
Otherwise specify contact code 491. 504 — — No No Yes No
— 505 513 Top Yes No Yes
COVER CROSS REFERENCE, FOR — 506 514 Side Yes No Yes
DETAILS SEE 8016 CONNECTOR Male — 507 515 Top Yes No No
(Exposed — 508 516 Side Yes No No
Clamp
Contacts) — 509 517 Top No Yes Yes
Cover Cable 8026/.100" — 510 518 Side No Yes Yes
Number Entrance Description (2.54mm) sq. — 511 519 Top No Yes No
30-8016-9821 Side Small 75 Pin — 512 520 Side No Yes No
30-8016-9822 Top Small 75 Pin 601 — — No No Yes Yes
30-8016-9823 Side Small 117 Pin 602 — — No No Yes No
30-8016-9824 Top Small 117 Pin 603 — — No Yes No Yes
30-8016-9825 Side Large 75 Pin 604 — — No Yes No No
30-8016-9826 Top Large 75 Pin — 605 613 Top No Yes Yes
30-8016-9827 Side Large 117 Pin — 606 614 Side No Yes Yes
30-8016-9828 Top Large 117 Pin
Female — 607 615 Top No Yes No
30-8016-9832 Side Large 165 Pin
(Recessed — 608 616 Side No Yes No
30-8016-9833 Top Large 165 Pin
30-8016-9838 Side Ex-Large 75 Pin Contacts) — 609 617 Top Yes No Yes
30-8016-9839 Top Ex-Large 75 Pin — 610 618 Side Yes No Yes
30-8016-9840 Side Ex-Large 117 Pin — 611 619 Top Yes No No
30-8016-9842 Top Ex-Large 117 Pin — 612 620 Side Yes No No
30-8016-9843 Side Ex-Large 165 Pin
30-8016-9844 Top Ex-Large 165 Pin
30-8016-9845 Side Ex-Large —
30-8016-9846 Top Ex-Large —
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Additional information on this product is available from AVX’s catalog
Call or
1-800-879-1613
AVX’s FAX Service.
and request
Call 1-800-879-1613
document #324.andVisit
request
our website
document
http://www.avxcorp.com
#324.
Visit our website http://www.avxcorp.com

324 ELCO
Varicon®
Series 8026 – 0.100" Rectangular Connector
33 CONTACTS 75 CONTACTS
Female Plug (Recessed Contacts) For variation code number Female Plug (Recessed Contacts) For variation code number
See Table 1 Page 324 See Table 2 Page 324 See Table 3 Page 324 See Table 4 Page 324

117 CONTACTS 65 CONTACTS

Female Plug (Recessed Contacts) For variation code number Female Plug (Recessed Contacts) For variation code number
See Table 3 Page 324 See Table 4 Page 324 See Table 3 Page 324 See Table 4 Page 324

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #325. Visit our website http://www.avxcorp.com

ELCO 325
 Varicon®
Series 8223 – 0.100" Dual Row Square Grid
Male Insulators

Crimp
Type

Female Insulators

Crimp
Type
ORDERING CODE
00 8223 XXX XXX XXX
Number of Positions Contact Code Variation Code
024, 048, 072 & 096

Accessories
Insulator Guide Pins Sockets (R) Refer Board
To
Type Variation Contact Style Cover Bracket
Keying
Threaded
Figure Thickness
Locking Lkg. Kyg.
.080 2.03
001 Formed Contact Terminal X 1 .062 1.57
Use three digit code number when contacts are to be PC Terminal X 2
factory installed. If contacts are to be supplied loose, or 002 Wire Hole Terminal X 3
contact tails to be formed, use three zeros (000) in con- PC Straight Terminal X 4
tact code section. Note that the wire crimp tail contacts Crimp Contact X 5
can only be ordered as separate items by part numbers. Male 003 Wrappable Removable X 6
(Exposed 004 Formed Contact Terminal X 1 .093 2.36
Description Part No. H Board Contacts) 006 X 7
Code Profile Dim. Thk. Fig. Similar to 001
Coined Tail Formed 60 8223 0223 .080 1 007 X 8
000 90° after installing 60 8223 0213 .062 008 X 7
(Max. 0236 Diag.) Similar to 002
Coined Tail Formed 60 8223 0243 009 X 8
000 90° after installing 60 8223 0253 .093 1
016 X 7
(Max. 0236 Diag.) Similar to 004
P.C. Tail Coined 017 X 8
473 60 8223 0233 .400 2
(Max. 0236 Diag.) 018 X 7
P.C. Tail Coined
Similar to 006
519 (Max. 0236 Diag.) 60 8223 0213 .279 2 019 X 8
P.C. Tail Coined .080 2.03
520 (Max. 0236 Diag.) 60 8223 0223 .479 2 901 Formed Contact Terminal X 1 .062 1.57
558 P.C. Tail Coined 60 8223 0243 .309 2 PC Terminal X 2
559 (Max. 0236 Diag.) 60 8223 0253 .509 2
560 P.C. Tail Coined 60 8223 0263 .341 2 902 Wire Hole Terminal X 3
561 (Max. 0236 Diag.) 60 8223 0273 .541 2 PC Straight Terminal X 4
Wire Hole Tail Crimp Contact X 5
722 (.032 x .050) 60 8200 1613 .162 3
903 Wrappable Removable X 6
721 P.C. Tail .020 Sq. 60 8200 1623 .228 4
736 P.C. Tail .020 Sq. 60 8200 1633 .259 4 Female 904 Formed Contact Terminal X 1 .093 2.36
737 P.C. Tail .020 Sq. 60 8200 1643 .541 4 (Exposed 906 X 15
Similar to 901
753 P.C. Tail .020 Sq. 60 8200 1653 .103 4 Contacts) 907 X 16
771 P.C. Tail .020 Sq. 60 8200 1663 .462 4 908 X 15
Crimp Contact Similar to 902
000 (Reel 3000) 60 8216 0323 5 909 X 16
22-30 AWG 916 X 15
Crimp Contact (Loose) Similar to 904
000 22-30 AWG 60 8216 0313 5 917 X 16
Wrappable/Removable 918 X 15
491 60 8216 0413 .560 6 Similar to 905
Contact (.025 Sq.) 919 X 16

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #326. Visit our website http://www.avxcorp.com

326 ELCO
Varilok®
Series 8020 – Cable Connector

Connector Dimensions (mm) ORDERING CODE

For complete connectors with
Non-Crimp Contacts Fitted
00 8020 0XX 0XX 0XX
VARIATION

*CONTACT VARIATION
217 = Solder Tag
218 = Wire Wrap
(0.61 x 1.27 x 14.4mm)
296 = Mini Wire Wrap
(0.61 x 0.66 x 4.73mm)
504 = Solder Tail
(0.61 x 0.66 x 4.32mm)
NUMBER OF POSITIONS
002 = 2 way
003 = 3 way
2 way connector 3 way connector SERIES
housing housing NUMBER

PREFIX

*Contact terminations should be insulated

because they may protrude from the insulator
Locking Clip Dimensions (mm)
Features and Benefits
• 2 and 3 position in single row
• Uses identical molding for plug and socket
• Uses identical contact for plug and socket
• Uses standard Varicon 8016 contacts
• Uses standard Varicon Crimping Tools, Contact
Extraction Tools and Insertion Tools
• Has combined nylon mounting and locking clip
common to both sizes
• Contacts for both solder and crimp termination

Locking clip 2 way assembly 3 way assembly Specifications

• Contact – Single row of 2 or 3 Varilok contacts
• Configuration – On a 0.200" pitch, 5.08 mm
• Contact Rating – 8.5 amperes
• Contact Resistance – 6 milliohms (max)
• Insulation Resistance – 5,000 megohms (min)
• Voltage Proof – 2,500 volts R.M.S. Sea Level

Ordering Code for Housings and Crimp Contacts

Description Part Number Description Part Number
2 way connector: Housing only 60-8020-3117-00-000 0.25µM Gold reeled crimp contacts (gold all over) 60-8017-0323-99-339
3 way connector: Housing only 60-8020-3317-00-000 0.25µM Gold reeled crimp contacts (selective) 60-8017-0323-99-042
0.25µM Gold loose crimp contacts (gold all over) 60-8017-0313-00-339 NB: See page 22 for details of crimp contacts
0.25µM Gold loose crimp contacts (selective) 60-8017-0313-00-042 Locking clip 60-8020-3210-00-000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #327. Visit our website http://www.avxcorp.com

ELCO 327
Varilok®
Series 8022 – Cable Connector
Features
• 3 position in single row
• Male insulator incorporates two positive
locking arms for up to 1.6 mm thick
panel mount
• Uses identical contact for plug and socket
• Uses standard Varicon 8016 contacts
(8017 Series)
• Uses standard Varicon Crimping Tools,
Contact Extraction Tools and Insertion Tools
• Has mounting and locking clip mechanism
• Contacts for both solder and crimp
termination

Technical Specifications
• Contact Spacing – 5.08 mm
• Contact Rating – 8.5 amperes
• Contact Resistance – 6 milliohms (max)
• Insulation Resistance – 5K megohms
• Voltage Proof – 2.5K volts R.M.S. Sea Level
• Operating Temperature – -55°C to 125°C

Plug

Panel Cutout

Socket

Part Numbers
Plug Molding 60 8022 3218 00 000
Socket Molding 60 8022 3318 00 000
Crimp Contacts (loose) 60 8017 0313 00 339
Crimp Contacts (reel) 60 8017 0323 00 339

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #328. Visit our website http://www.avxcorp.com

328 ELCO
Varicon®
Series 8218 – 0.050" Staggered Dual Row

Receptacle Variation 001 Plug Variation 002 Plug Variation 005

Receptacle 001 – Mates with Plugs 002 and 005

ORDERING CODE
00 8218 100 XXX 0XX

Number of Positions Contact Code Variation Code

002 to 076 for connectors 001 = Receptacle
without center guide 002 = Plug-Card
005 = Plug-Board
with keying pins with keying holes
011 = Receptacle 021 = Receptacle
012 = Plug-Card/pin 022 = Plug-Card/pin
Variant 002 right angled contacts inserted in inserted in
odd position odd position
000 = 60 8200 16 33 013 = Plug-Card/pin 023 = Plug-Card/pin
P.C. Tail inserted in inserted in even
000 = 60 8200 16 63 even position
P.C. Tail position 027 = Plug-Board
Variants 001 and 005 017 = Plug-Board
722 = 60 8200 16 13
Wire Hole Tail

736 = 60 8200 16 33
P.C. Tail (X = 9/32", Y = 1/4")
753 = 60 8200 16 53
P.C. Tail (X = 1/8", Y = 3/32")
771 = 60 8200 16 63
P.C. Tail (X = 31/64", Y = 29/64")

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #329. Visit our website http://www.avxcorp.com

ELCO 329
Varicon®
Series 8219 – 0.050" Staggered Dual Row

Dimensions: millimeters (inches)

Number
Ref. Ref.
of A B C E F G
D K
Positions
18 17 .850 (0.033) 1.150 (0.045) 1.290 (0.051) 1.400 (0.055) 1.540 (0.061) .964 (0.038) 1.300 (0.051)
30 29 1.450 (0.057) 1.750 (0.069) 1.890 (0.075) 2.000 (0.079) 2.140 (0.084) 1.564 (0.061) 1.900 (0.075)
36 35 1.750 (0.069) 2.050 (0.080) 2.190 (0.086) 2.300 (0.091) 2.440 (0.096) 1.864 (0.073) 2.220 (0.087)
42 41 2.050 (0.080) 2.350 (0.093) 2.490 (0.098) 2.600 (0.102) 2.740 (0.108) 2.164 (0.085) 2.500 (0.098)
54 53 2.650 (0.104) 2.950 (0.116) 3.090 (0.122) 3.200 (0.126) 3.340 (0.131) 2.764 (0.109) 3.100 (0.122)
72 71 3.550 (0.140) 3.850 (0.152) 3.990 (0.157) 4.100 (0.161) 4.240 (0.167) 3.664 (0.144) 4.000 (0.157)

Receptacle 001 - Mates with Plugs 002 and 005

ORDERING CODE
00 8219 042 722 001

Number of Positions Contact Code Variation Code

018, 030, 036, 042, 054, 072 (see below)

For Variation = 001 For Variation = 002

Code “X” Code
No. Contact Type Dim. No. Contact Type
722 Wire hole tail .187 000 P. C. solder tails formed
721 P. C. solder tail .250 722 Wire hole tail unformed
736 P. C. solder tail .281
For Variation = 005
737 P. C. solder tail .562
753 P. C. solder tail .125
Code “Y”
No. Contact Type Dim.
771 P. C. solder tail .484
722 Wire hole tail .157
721 P. C. solder tail .219
736 P. C. solder tail .250
737 P. C. solder tail .531
753 P. C. solder tail .093
771 P. C. solder tail .453

NOTE: Connector is supplied with

001 = Receptacle
Without mounting screws or eyelets, as applicable
002 = Plug, perpendicular board mounting (see drawings).
Keying
005 = Plug, parallel board mounting
Contact Factory for Special Variations.

POLARIZING SYSTEM

When Keying is ordered with part number, the Key is installed at the factory.

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #330. Visit our website http://www.avxcorp.com

330 ELCO
Varicon®
Series 7008 – 0.100" Staggered Dual Row

ORDERING CODE
00 7008 0XX XXX 001

Number of Positions Contact Code Variation Code

017, 023, 029, 035, 041 See table

141 = 60 7001 06 33
P.C. Termination for 1/8" Card Card Card Code
Slot Guides
146 = 60 7001 13 13
1/16" Yes 001
.078" Base Taper Tab
No 002
156 = 60 7001 18 13
Wire wrapping (.026 x .062 x .600") Availability
Connector No. of Positions
163 = 60 7001 19 13
Description 17 23 29 35 41
.098" Base Taper Tab w/Wire Hole With Guides – for 1/16" Card X X X X X
Without Guides – for 1/16" /Card X X X X X
165 = 60 7001 20 13
Forked Tail Solder Termination for Bus Line Connection
(.056 x .125" Slot)

166 = 60 7001 20 23
Dual Solder Termination for 2 Wires or Bus Line
(.056 x .125" Slot)

189 = 60 7004 02 13
Conventional Solder Termination for 3 Wires

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #331. Visit our website http://www.avxcorp.com

ELCO 331
Varicon®
Series 7022 – 0.100" Staggered Dual Row
ORDERING CODE

00 7022 0XX 000 00X

Number of Positions
017, 023, 029, 035, 041
For Series 7008 receptacle

Variation Code
001 = 1/16" Module Card Thickness
002 = 3/32" Module Card Thickness
MOUNTING LAYOUT 003 = 1/16" Module Card Thickness

6
60 7001 2913 for 1/16" Card
60 7001 2923 for 3/32" Card 560
60 7001 2813 for 1/16" Card
7001 2823 for 3/32" Card

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #332. Visit our website http://www.avxcorp.com

332 ELCO
Varicon®
Series 7023 – 0.100" Staggered Dual Row

00 7023 0XX 000 001

Number of Positions
017, 023, 029, 035, 041, 047

Diallyl Phthalate Contacts used in this connector:

Glass Filled
Card Upper Card Lower Card
1/16" Card 3/32" Card 1/16" Card Contacts Contacts
001 002 003
1/16" 60 7001 29 13 60 7001 28 13
110* 111*
*Conforms to MIL-C-21097 3/32" 60 7001 29 23 60 7001 28 23

Technical Specifications
• Current Rating – 10 amperes
• Contact Resistance – 6 milliohms, maximum
• Contact Material and Plating –
Phosphor Bronze per QQ-B-750, Composition A.
Gold, 10 microinches minimum,
over nickel, 30 to 100 microinches
Mounting Layout • Insulator Material – Diallyl phthalate, glass-filled,
flame resistant per MIL-M-14F, Type SDGF.
Variation 001/002/110/111
Thermoplastic Polycarbonate
Variation 003
• Insulation Resistance – 25,000 megohms, minimum
• Dielectric Withstanding Voltage –
Sea Level: 1800 Volts rms
3.4" Hg: 675 Volts rms
• Insertion/Withdrawal Force – 2 to 16 ounces
per contact
• Conforms to Military Specifications –
MIL-C-21097, MIL-E-5400, MIL-E-8189,
MIL-T-21200, MIL-E-19600 (Para. 3.5.5),
MIL-STD-454.

Dimensions: millimeters (inches)

Number
of B C H
Positions Max.
17 2.200 (0.087) 2.470 (0.097) 1.600 (0.063)
23 2.800 (0.110) 3.070 (0.121) 2.200 (0.087)
29 3.400 (0.134) 3.670 (0.144) 2.800 (0.110)
35 4.000 (0.157) 4.270 (0.168) 3.400 (0.134)
41 4.600 (0.181) 4.870 (0.192) 4.000 (0.157)
47 5.200 (0.205) 5.470 (0.215) 4.600 (0.181)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #333. Visit our website http://www.avxcorp.com

ELCO 333
Varicon®
Series 7024 – 0.100" Staggered Dual Row

ORDERING CODE
00 7024 023 163 001

Number of Positions Contact Code Variation Code

017, 023, 029, 035, 041 See table 001 = 1/16" Thick Card
002 = 3/32" Thick Card
110* = 1/16" Thick Card
111* = 3/32" Thick Card
* For Conformance to
MIL-C-21097B

141 = 60 7001 06 33
P.C. Termination for 1/8" Card
Availability
146 = 60 7001 13 13 Connector No. of Positions
.078" Base Taper Tab Description 17 23 29 35 41
For 1/16" Card X X X X X
156 = 60 7001 18 13
For 3/32" Card X X X X X
Wire wrapping (.026 x .062 x .600")

163 = 60 7001 19 13
.098" Base Taper Tab w/Wire Hole

165 = 60 7001 20 13
Forked Tail Solder Termination for Bus Line Connection
(.056 x .125" Slot)

166 = 60 7001 20 23
Dual Solder Termination for 2 Wires or Bus Line
(.056 x .125" Slot)

189 = 60 7004 02 13
Conventional Solder Termination for 3 Wires

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #334. Visit our website http://www.avxcorp.com

334 ELCO
Rack and Panel Connectors - Varicon®
Series 7038 – 0.100"
Staggered Dual Row, Crimp Contacts

ORDERING CODE
00 7038 0XX XXX XXX

Number of Contacts Contact Code Variation Code

017, 023, 029, See table 001 = 1/16" Thick Card
035, 041, 047 002 = 3/32" Thick Card
110* = 1/16" Thick Card
111* = 3/32" Thick Card
* For Conformance to
217 = 60 8017 05 13 MIL-C-21097
Wire Hole

218 = 60 8017 06 13
Solderless Wrap Tail – .025" x .050" x .567"

750 = 60 8017 06 23
Solderless Wrap Tail – .025" x .050" x .760"

296 = 60 8017 06 33
Solderless Wrap Tail – .025" x .025" x .580"

504 = 60 8017 06 63
Solderless Wrap Tail – .025" x .025" x .170"

*000 = 60 8017 03 13
Wire Crimp Tail (Contacts Loose) 18-26 AWG

*000 = 60 8017 03 23
Wire Crimp Tail
(Contacts on a Reel) 18-26 AWG

*Order separately by part number, refer to page 22

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #335. Visit our website http://www.avxcorp.com

ELCO 335
Memory Card Connectors

PCMCIA Compact Flash MMC Smart Card SO-DIMM

Series Series Series Series
Plug/Ejector 5025 5610 5038 5033
5027 5620

Receptacles 5069 5611

9170

Frames/Covers 9170 5612

I/O Plug 9157

Memory Module 6400

Series 5027 – Card BUS SMT Connector

ORDERING CODE
31 5027 068 540 833

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #336. Visit our website http://www.avxcorp.com

336 ELCO
Memory Card Connectors
Series 5025 – PCMCIA (Single) Connector/Ejector

Connector Ejector

Single SMT Single DIP

Button Button
Stand Off Keying Connector Ejector Stand Off Keying Connector Ejector
Side Side
Height = 0 5v. Normal Left 31 5025 068 305 833 30 5025 000 321 000 Height = 0 5v. Normal Left 31 5025 068 100 833 30 5025 000 321 000
Right 31 5025 068 305 833 30 5025 000 322 000 Right 31 5025 068 100 833 30 5025 000 322 000
Height = 0 5v. Reverse Left 31 5025 068 355 833 30 5025 000 321 000 Height = 0 5v. Reverse Left 31 5025 068 150 833 30 5025 000 321 000
Right 31 5025 068 355 833 30 5025 000 322 000 Right 31 5025 068 150 833 30 5025 000 322 000

Series 5025 – PCMCIA (Dual) Connector/Ejector

Connector

Dual DIP/DIP
Button
Ejector
Stand Off Keying Connector Ejector
Side
Left/Left 31 5025 136 500 833 30 5025 000 621 000
Height = 0 5v. Normal Right/Right 31 5025 136 500 833 30 5025 000 622 000
Left/Right 31 5025 136 500 833 30 5025 000 623 000
Right/Left 31 5025 136 500 833 30 5025 000 624 000
Left/Left 31 5025 136 550 833 30 5025 000 621 000
Height = 0 5v. Reverse Right/Right 31 5025 136 550 833 30 5025 000 622 000
Left/Right 31 5025 136 550 833 30 5025 000 623 000
Right/Left 31 5025 136 550 833 30 5025 000 624 000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #337. Visit our website http://www.avxcorp.com

ELCO 337
Memory Card Connectors
Series 5027 – PCMCIA Connector/Ejector

Connector

Button
Stand Off Keying Connector Ejector
Side
Height = 0 5v. Normal Left Side 31 5027 068 010 833 30 5027 000 001 000
Right Side 31 5027 068 010 833 30 5027 000 002 000
Height = 0 5v. Reverse Left Side 31 5027 068 020 833 30 5027 000 001 000
Right Side 31 5027 068 020 833 30 5027 000 002 000
Height = 0 3.3v. Normal Left Side 31 5027 068 030 833 30 5027 000 001 000
Right Side 31 5027 068 030 833 30 5027 000 002 000
Height = 0 3.3v. Reverse Left Side 31 5027 068 040 833 30 5027 000 001 000
Right Side 31 5027 068 040 833 30 5027 000 002 000
Height = 2.2 5v. Normal Left Side 31 5027 068 110 833 30 5027 000 101 000
Right Side 31 5027 068 110 833 30 5027 000 102 000
Height = 2.2 5v. Reverse Left Side 31 5027 068 120 833 30 5027 000 101 000 Ejector
Right Side 31 5027 068 120 833 30 5027 000 102 000
Height = 2.2 3.3v. Normal Left Side 31 5027 068 130 833 30 5027 000 101 000
Right Side 31 5027 068 130 833 30 5027 000 102 000
Height = 2.2 3.3v. Reverse Left Side 31 5027 068 140 833 30 5027 000 101 000
Right Side 31 5027 068 140 833 30 5027 000 102 000

Series 5069 – PCMCIA Receptacle

Series 5069
Solder Tail Style Ordering Code
Straddle 20 5069 068 003 833 Semi-Hard Tray
Single Side SMT 24 5069 068 901 835 Tape & Reel (72mm)

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #338. Visit our website http://www.avxcorp.com

338 ELCO
Memory Card Connectors
Series 5069 – PCMCIA Receptacle (Single Side)
ORDERING CODE
XX 5069 068 901 835
24 = TAPE AND REEL PACKAGE

Series 5069 – PCMCIA Receptacle (Straddle)

ORDERING CODE
20 5069 068 003 833

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #339. Visit our website http://www.avxcorp.com

ELCO 339
Memory Card Connectors
Series 9170 – Type II Frameless PCMCIA Card Kit
Also Available
• The 68 position Cardbus connector can be incorporated
in Elco Frameless Kit Concept
• The Cardbus connector will allow engineers to increase
the speed of the actual card.
• Dual I/O connectors capabilities for fax/modem applica-
tions.
• Combinations of 4, 7 and 15 ways can be mounted.
• Your existing I/O connectors can be mounted allowing
you to make full use of your existing cab assemblies.
• I/O connectors can also be customized to suit individual
applications thus allow coax, antenna, LED’s etc, to be
mounted.
• Extended cards that utilize the frameless kit concept -
for WLAN market.
• The plastic bulge element can be customized to suit
individual applications which can be metal coated if
required.
• Extended bulge parts can also be mounted on a fully
metalised bottom cover.

Selection Guide Frameless Kit Type II

Kit Consists Of
Kit Part Number 68 Position Covers I/O
Top
Blank I/O 80-9170-4000-00-000 22-9170-000-0
20-9170-068-001-xxx
Can be supplied with Bottom
special cut-outs 80-9170-4100-00-000
Top
80-9170-4000-00-000 21-9170-015-001-xxx
15 way without co-axial 20-9170-068-001-xxx
Bottom
80-9170-4100-00-000
Top
80-9170-4000-00-000 21-9170-015-002-xxx
15 way with co-axial 20-9170-068-001-xxx
Bottom
80-9170-4100-00-000

Series 9157 – I/O PCMCIA Card Plug

Grommet Options
Interconnection Assembly (Plug/Covers) 00x-7 = 5mm Diameter
Selection Guide 8 = 3.5mm Diameter
15 Way Plug Covers
Without co-axial 58 9157 015 000 004 58 9157 000 000 00x
With co-axial 58 9157 015 000 003 58 9157 000 000 00x
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #340. Visit our website http://www.avxcorp.com

340 ELCO
Memory Card Connectors
Series 5610 – Compact Flash Type I Header (Zero Stand Off)

Connector Ejector

Stand Off

Stand Off

Connector
Stand Off Keying Connector
Height = 0 normal 31 5610 050 500 833
reverse 31 5610 050 550 833
Height = 2.2 normal 31 5610 050 210 833
reverse 31 5610 050 260 833

Ejector and Connector

Connector Style Ejector Style Ordering Code
Stand Off Keying Button Side Connector Ejector
Height = 0 Normal Straight Left 31 5610 050 500 833 30 5610 000 001 000
Right 31 5610 050 500 833 30 5610 000 002 000
Foldable Left 31 5610 050 500 833 30 5610 000 005 000
Right 31 5610 050 500 833 30 5610 000 006 000
Height = 0 Reverse Straight Left 31 5610 050 550 833 30 5610 000 001 000
Right 31 5610 050 550 833 30 5610 000 002 000
Foldable Left 31 5610 050 550 833 30 5610 000 005 000
Right 31 5610 050 550 833 30 5610 000 006 000
Height = 2.2 Normal Straight Left 31 5610 050 210 833 30 5610 000 001 000
Right 31 5610 050 210 833 30 5610 000 002 000
Foldable Left 31 5610 050 210 833 30 5610 000 005 000
Right 31 5610 050 210 833 30 5610 000 006 000
Height = 2.2 Reverse Straight Left 31 5610 050 260 833 30 5610 000 001 000
Right 31 5610 050 260 833 30 5610 000 002 000
Foldable Left 31 5610 050 260 833 30 5610 000 005 000
Right 31 5610 050 260 833 30 5610 000 006 000

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #341. Visit our website http://www.avxcorp.com

ELCO 341
Memory Card Connectors
Series 5611/5612 – Compact Flash Connectors/Card Kits

Receptacle Connector Series 5611 (For Type I)

Solder Tail Style Ordering Code
Straddle 20 5611 050 113 833 Semi-Hard Tray
Single Side SMT 24 5611 050 114 835 Tape & Reel (56mm)

Card Kit Series 5612 (For Type I)

With Insulating Tape 10 5612 100 000 011
Without Insulating Tape 10 5612 100 000 012

Card Configuration
Type I

Type II

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #342. Visit our website http://www.avxcorp.com

342 ELCO
Memory Card Connectors
Series 5620 – Compact Flash Type II Header

ORDERING CODE
31 5620 050 116 833

Recommended Printed Circuit Layout

Keying A B C D E F G H
Normal 1.4 0.78 #1 #13 #25 #26 #38 #50

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #343. Visit our website http://www.avxcorp.com

ELCO 343
 Memory Card Connectors
Series 5038 – MMC (Multimedia Card)

ORDERING CODE
10 5038 007 052 833

Series 5033 – (Smart Card)

Connector

Harness

ORDERING CODE
ORDERING CODE 97 5033 008 160 001
97 5033 008 XXX 001

050 = Harness 50mm

160 = Harness 160mm
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #344. Visit our website http://www.avxcorp.com

344 ELCO
Memory Card Connectors
Series 6400 – 0.8mm Pitch – SO-DIMM
144 Pin (2x Strain Relief)

ORDERING CODE
20 6400 144 101 8XX
FINISHING CODE
856 = Au 0.1µm
861 = Au 0.25µm

Series 6400 – 0.8mm Pitch – SO-DIMM

144 Pin (4x Strain Relief)
ORDERING CODE
20 6400 144 001 8XX
FINISHING CODE
856 = Au 0.1µm
861 = Au 0.25µm

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #345. Visit our website http://www.avxcorp.com

ELCO 345
Automotive Splashproof Connectors
Series 9215 – Branch Connectors
Housing Contact

ORDERING CODE ORDERING CODE

60 9215 001 010 00X 70 9215 999 00X 825
0 = 0.85sq (white)
1 = 0.5sq (black) VARIATION CODE VARIATION CODE (IDC)
6 = 0.3sq (blue) 0 = 0.5sq AVS 0.5 (Crimping side area)
1 = 0.85sq
2 = 0.3sq

Series 9515 Connectors

Plug Receptacle

PLUG HOUSING ORDERING CODE RECEPTACLE HOUSING ORDERING CODE

62 9515 004 010 001
61 9515 004 000 001

HARD SEAL (B) ORDERING CODE CAP ORDERING CODE

62 9515 004 020 001
92 9515 004 XXX XXX
NUMBER OF POSITIONS - Color HARD SEAL (A) ORDERING CODE
012 002 = (2P/Blue), 013 003 = (3P/Yellow), 014 004 = (4P/Red)
92 9515 004 000 003
TOOLING
Auto Crimping Machine HARD SEAL (C) ORDERING CODE
Press Machine 36 1004 001 92 9515 004 XXX XXX
Applicator 36 1000 044
NUMBER OF POSITIONS
Press Capacity 2 (tons)
002 002 = (2P) 003 003 = (3P) 004 004 = (4P)
Dimension W550xH700xD380
Weight 85kg Contact Plug Receptacle
Power AC100V 50/60Hz

PLUG CONTACT ORDERING CODE

71 9515 999 010 808

RECEPTACLE CONTACT ORDERING CODE

72 9515 999 020 808

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #346. Visit our website http://www.avxcorp.com

346 ELCO
Plastic Optical Fiber (POF) Connector
Series 9710
ORDERING CODE
Part No. 61 9710 002 001 001

Series 9711 SP Connector

Plug Adaptor

ORDERING CODE
PLUG Part No. 61 9711 002 001 001
ADAPTOR Part No. 60 9711 004 101 001

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #347. Visit our website http://www.avxcorp.com

ELCO 347
CD ROM/HDD Connectors
Series 5600 – 0.8mm Pitch 50 Position Plug

ORDERING CODE
14 5600 050 000 883

Series 5600 – 0.8mm Pitch 50 Position Receptacle

ORDERING CODE
24 5600 050 100 883

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #348. Visit our website http://www.avxcorp.com

348 ELCO
Telecom Connectors
Series 9156 – POGO Pin Battery Connector

(3 position example)

Features Examples ORDERING CODE

• Nose heights optional No. of Nose Contact Current 58 9156 00X 000 0XX
• 2, 3, 4, 5 way available, Ways Height mm Pitch mm Rating Amps CONTACT PITCH
custom options available PLATING CODE
2 1.5 4.0 3
• Contact pitch optional
3 2.2 6.5 3
• Current rating typically 3A NO. OF POSITIONS
4 1.5 to 2.6 4.0 3
• Gold and Tin plated contacts SERIES
PREFIX

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #349. Visit our website http://www.avxcorp.com

ELCO 349
Telecom Connectors
Series 9157 – I/O Socket

Features
• > 10,000 mating cycles
• Optional 50 mohm coax
• SMT contacts
• Retention brackets

Series 9157 – I/O Plug

Features
• > 10,000 mating cycles
• Optional coax
• 10/15 contacts

Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #350. Visit our website http://www.avxcorp.com

350 ELCO
Telecom Connectors
Series 9155 – (3, 4 and 5 Position) Battery Connector

Example

Features No. of Nose Contact Current ORDERING CODE

• Nose heights between 1.2 and Ways Height mm Pitch mm Rating Amps 58 9155 00X 000 0XX
2.6mm 3 1.2 to 2.6 2.5 3 CONTACT PITCH
• 3, 4 and 5 way options 4 1.2 to 2.6 2.5/3.0 3 PLATING CODE
• 2.5 contact pitch standard 5 1.2 to 2.6 2.5 3 NO. OF POSITIONS
• Custom options available
SERIES
• Current rating typically 3A PREFIX
• Gold and Tin plated contacts
Additional information on this product is available from AVX’s catalog or AVX’s FAX Service.
Call 1-800-879-1613 and request document #351. Visit our website http://www.avxcorp.com

ELCO 351