DATA SHEET

SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
General Purpose & High Capacitance
Class 2, X7R
6.3 V TO 50 V
100 pF to 22 µF
RoHS compliant & Halogen Free

Product Specification – October 13, 2011 V.8

 Product specification 2
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP

This specification describes X7R CTC & 12NC
series chip capacitors with lead- All part numbers are identified by the series, size, tolerance, TC material,
free terminations. packing style, voltage, process code, termination and capacitance value.
YAGEO BRAND ordering code
APPLICATIONS GLOBAL PART NUMBER ( PREFERRED )
PCs, Hard disk, Game PCs
DVDs, Video cameras CC XXXX X X X7R X BB XXX
(1) (2) (3) (4) (5)
Mobile phones
Data processing (1) SIZE – INCH BASED (METRIC)
0201 (0603)
FEATURES 0402 (1005)
Supplied in tape on reel 0603 (1608)
Nickel-barrier end termination 0805 (2012)
RoHS compliant 1206 (3216)
Halogen Free compliant 1210 (3225)
1812 (4532)

(2) TOLERANCE
J = ±5% (1)
K = ±10%
M = ±20%

(3) PACKING STYLE

R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case

(4) RATED VOLTAGE

5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V

(5) CAPACITANCE VALUE

2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF

NOTE
1. Tolerance ±5% is not available for full product range, please contact local sales force
before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 3
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

PHYCOMP BRAND ordering codes

GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are
acceptable to order Phycomp brand products.
GLOBAL PART NUMBER ( PREFERRED )

For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.

12NC CODE

2 2 XX XX X X X X XX

Carrier type Capacitance value(1)

38 = Paper/PE (≥ 10 V)
22 = Blister (≥ 10 V)
50 = Blister (6.3 V)
Tolerance
55 = Paper/PE (6.3 V)
54 = Bulk 5 = ±5%(2)
6 = ±10%
7 = ±20%

Rated voltage - Termination Temperature characteristic

20 = 6.3 V 5 = X7R
24 = 10 V
78 = 16 V
91 = 25 V
58 = 50 V Packaging(3)
YNM0029 1 = reel: ∅180 mm; 7"
5 = reel: ∅330 mm; 13"
Size 4 = bulk case
8 = 0201
7 = 0402
6 = 0603
0 = 0805
1 = 1206
2 = 1210
4 = 1812

(1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR X7R"
(2) Tolerance ±5% is not available for full product range, please contact local sales force before ordering
(3) Quantity on reel depends on thickness classification; see table 5

PHYCOMP CTC CODE ( FOR NORTH AMERICA )

Example: 02012R102K8B20D
0201 2R 102 K 8 B 2 0 D
Size Temp. Capacitance
Tolerance Voltage Termination Packing Marking Range identifier
code Char. in pF
0201 2R = X7R 101 = 100 pF; J = ±5% (1) 5 = 6.3 V B = NiSn 2 = 180 mm 0 = no marking D = Class 2 MLCC
0402 the third digit K = ±10% 6 = 10 V 7” Paper/PE
signifies the 3 = 330 mm
0603 M = ±20% 7 = 16 V
multiplying factor: 13” Paper/PE
0805 8 = 25 V
0=×1 B = 180 mm
1206 9 = 50 V
1 = × 10 7” Blister
1210
2 = × 100 F = 330 mm
1812
3 = × 1,000 13” Blister
P = Bulk case

NOTE
1. Tolerance ±5% is not available for full product range, please contact local sales force before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 4
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic terminations

dielectric in which a number of

interleaved metal electrodes are
contained. This structure gives
electrodes
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered MLB457

with a layer of plated tin (NiSn). ceramic material

The terminations are lead-free. A
cross section of the structure is Fig. 1 Surface mounted multilayer ceramic capacitor construction
shown in Fig.1.

DIMENSION
Table 1 For outlines see fig. 2
L2 / L3 (mm) L4 (mm) OUTLINES
TYPE L1 (mm) W (mm) T (MM)
min. max. min. For dimension see Table 1
0201 0.6 ±0.03 0.3 ±0.03 0.10 0.20 0.20
0402 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40
1.6 ±0.10 (1) 0.8 ±0.10 (1)
0603 0.20 0.60 0.40 T W
1.6 ±0.15 (2) 0.8 ±0.15 (2)
2.0 ±0.10 (1) 1.25 ±0.10 (1)
0805 0.25 0.75 0.55 L2 L4 L3

2.0 ±0.20 (2) 1.25 ±0.20 (2) Refer to L1 MBB211

3.2 ±0.15 (1) 1.6 ±0.15 (1) table 2 to 4

1206 0.25 0.75 1.40
3.2 ±0.30 (2) 1.6 ±0.20 (2) Fig. 2 Surface mounted multilayer
3.2 ±0.20 (1) 2.5 ±0.20 (1) ceramic capacitor dimension
1210 0.25 0.75 1.40
3.2 ±0.40 (2) 2.5 ±0.30 (2)
4.5 ±0.20 (1) 3.2 ±0.20 (1)
1812 0.25 0.75 2.20
4.5 ±0.40 (2) 3.2 ±0.40 (2)

NOTE
1. Dimension for size 0603, C < 10 µF; 0805 to 1812, C ≤ 100nF
2. Dimension for size 0603, C ≥ 10 µF; 0805 to 1812, C > 100 nF

www.yageo.com
Oct 13, 2011 V.8
 Product specification 5
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 2 Sizes from 0201 to 0402
CAP. Last 2-digit of 0201 0402
12NC 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V

100 pF 09

150 pF 12

220 pF 14 0.3±0.03

330 pF 16 0.3±0.03

470 pF 18

680 pF 21

1.0 nF 23 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05

1.5 nF 25
2.2 nF 27
3.3 nF 29 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05

4.7 nF 32
6.8 nF 34
10 nF 36
15 nF 38
22 nF 41
33 nF 43
47 nF 45
68 nF 47
100 nF 49
150 nF 52
220 nF 54 0.5±0.05 0.5±0.05 0.5±0.05

330 nF 56
470 nF 58 0.5±0.05

680 nF 61
1.0 µF 63
2.2 µF 67
4.7 µF 72
10 µF 76
22 µF 81

NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 6
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 3 Sizes from 0603 to 0805
CAP. Last 2-digit of 0603 0805
12NC 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V

100 pF 09
150 pF 12
220 pF 14
330 pF 16
470 pF 18
680 pF 21
1.0 nF 23
1.5 nF 25
2.2 nF 27 0.6±0.1 0.6±0.1
3.3 nF 29 0.8±0.1

4.7 nF 32
6.8 nF 34
0.8±0.1
10 nF 36 0.8±0.1
0.8±0.1
15 nF 38 0.8±0.1

22 nF 41
33 nF 43
47 nF 45
68 nF 47 0.85±0.1
0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
100 nF 49
150 nF 52
220 nF 54
330 nF 56
470 nF 58 1.25±0.2
680 nF 61 1.25±0.2 1.25±0.2
1.0 µF 63 1.25±0.2 1.25±0.2
2.2 µF 67
4.7 µF 72
10 µF 76
22 µF 81

NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 7
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 4 Size 1206
CAP. Last 2-digit of 1206
12NC 6.3 V 10 V 16 V 25 V 50 V

100 pF 09
150 pF 12
220 pF 14
330 pF 16
470 pF 18
680 pF 21
1.0 nF 23
1.5 nF 25
2.2 nF 27
3.3 nF 29
4.7 nF 32 0.85±0.1
6.8 nF 34
10 nF 36 0.85±0.1
15 nF 38
22 nF 41
33 nF 43
47 nF 45
68 nF 47
100 nF 49
150 nF 52
1.15±0.1
220 nF 54
330 nF 56 0.85±0.1
470 nF 58 1.0±0.1
680 nF 61
1.0 µF 63 1.15±0.1 1.15±0.1 1.6±0.2
1.15±0.1 1.15±0.1
2.2 µF 67
4.7 µF 72
1.6±0.2 1.6±0.2 1.6±0.2
10 µF 76 1.6±0.2
22 µF 81
47 µF 85

NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 8
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 5 Sizes from 1210 to 1812
CAP. Last 2-digit of 1210 1812
12NC 6.3 V 10 V 16 V 25 V 50 V 50 V

100 pF 09
150 pF 12
220 pF 14
330 pF 16
470 pF 18
680 pF 21
1.0 nF 23
1.5 nF 25
2.2 nF 27
3.3 nF 29
4.7 nF 32
6.8 nF 34
10 nF 36
15 nF 38 0.85±0.1
0.85±0.1
22 nF 41
33 nF 43
47 nF 45
68 nF 47
100 nF 49
150 nF 52
220 nF 54 1.15±0.1 1.15±0.1
0.85±0.1
330 nF 56
470 nF 58
1.15±0.1
680 nF 61 1.25±0.2
1.6±0.2
1.0 µF 63 1.25±0.2
2.2 µF 67
1.9±0.2
4.7 µF 72 1.9±0.2
1.9±0.2 1.9±0.2 1.9±0.2
10 µF 76
22 µF 81 2.5±0.2
2.5±0.2
47 µF 85

NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 9
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

THICKNESS CLASSES AND PACKING QUANTITY

Table 6
Ø180 MM / 7 INCH Ø330 MM / 13 INCH
SIZE THICKNESS TAPE WIDTH QUANTITY
CODE CLASSIFICATION QUANTITY PER REEL Paper Blister Paper Blister PER BULK CASE
0201 0.3 ±0.03 mm 8 mm 15,000 --- 50,000 --- ---
0402 0.5 ±0.05 mm 8 mm 10,000 --- 50,000 --- 50,000
0603 0.8 ±0.1 mm 8 mm 4,000 --- 15,000 --- 15,000
0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- 10,000
0805 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- 8,000
1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 5,000
0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- ---
0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- ---
1.00 / 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 ---
1206
1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 ---
1.6 ±0.15 mm 8 mm --- 2,500 --- 10,000 ---
1.6 ±0.2 mm 8 mm --- 2,000 --- 10,000 ---
0.6 / 0.7 ±0.1 mm 8 mm --- 4,000 --- 15,000 ---
0.85 ±0.1 mm 8 mm --- 4,000 --- 10,000 ---
1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 ---
1.15 ±0.15 mm 8 mm --- 3,000 --- 10,000 ---
1.25 ±0.2 mm 8 mm --- 3,000 --- --- ---
1210 1.5 ±0.1 mm 8 mm --- 2,000 --- --- ---
1.6 / 1.9 ±0.2 mm 8 mm --- 2,000 --- --- ---
2,000
2.0 ±0.2 mm 8 mm --- --- --- ---
1,000
1,000
2.5 ±0.2 mm 8 mm --- --- --- ---
500
1.15 ±0.15 mm 12 mm --- 3,000 --- --- ---
1.25 ±0.2 mm 12 mm --- 3,000 --- --- ---
1.35 ±0.15 mm 12 mm --- 2,000 --- --- ---
1808
1.5 ±0.1 mm 12 mm --- 2,000 --- --- ---
1.6 ±0.2 mm 12 mm --- 2,000 --- 8,000 ---
2.0 ±0.2 mm 12 mm --- 2,000 --- --- ---
0.6 / 0.85 ±0.1 mm 12 mm --- 2,000 --- --- ---
1.15 ±0.1 mm 12 mm --- 1,000 --- --- ---
1.25 ±0.2 mm 12 mm --- 1,000 --- --- ---
1812 1.5 ±0.1 mm 12 mm --- 1,000 --- --- ---
1.6 ±0.2 mm 12 mm --- 1,000 --- --- ---
2.0 ±0.2 mm 12 mm --- 1,000 --- --- ---
2.5 ±0.2 mm 12 mm --- 500 --- --- ---

www.yageo.com
Oct 13, 2011 V.8
 Product specification 10
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

ELECTRICAL CHARACTERISTICS
X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa

Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 7
DESCRIPTION VALUE

Capacitance range 100 pF to 22 µF

Capacitance tolerance ±5%, ±10%, ±20%
Dissipation factor (D.F.)

≤ 10 V ≤ 5%
Exception: 0201 ≥ 12 nF; 0603 ≥ 2.2 µF; 0805 ≥ 4.7 µF; ≤ 10%
1210 ≥ 4.7 µF
0805 ≥ 10 µF; 1206 ≥ 10 µF ≤ 15%
16 V ≤ 3.5%
Exception: 0201 ≥ 1.5 nF; 0402 ≥ 27 nF; 0603 ≥ 220 nF; ≤ 5%
0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF
1206 ≥ 10 µF; 1210 ≥ 22 µF ≤ 10%
25 V ≤ 2.5%
Exception: 0402 ≥ 10 nF; 0603 ≥ 47 nF; 0805 ≥ 220 nF; ≤ 3.5%
1206 ≥ 1 µF; 1210 ≥ 4.7 µF
0201 ≥ 560 pF; 0402 ≥ 56 nF; 0603 ≥ 1 µF; ≤ 5%
0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF
1206 ≥ 4.7 µF ≤ 10%
≥ 50 V ≤ 2.5%
Exception: 0201 ≥ 47 pF; 1206 ≥ 1 µF ≤ 3.5%
0603 ≥ 47 nF ≤ 3.0%
Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient): ±15%
Operating temperature range: –55 °C to +125 °C

NOTE
Capacitance tolerance ±5% is not available for full product range, please contact local sales force before ordering

www.yageo.com
Oct 13, 2011 V.8
 Product specification 11
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

YNM0013
15
ΔC
C
(%)
10

−5

−10

−15
−55 −25 5 40 65 95 125
T (oC)

Fig. 3 Typical capacitance change as a function of

temperature

www.yageo.com
Oct 13, 2011 V.8
 Product specification 12
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

Size 0201 10 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR

YNM0043
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

Size 0402 100 nF / 16 V

Solid lines: Impedance / Dotted lines: ESR

YNM0044
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

www.yageo.com
Oct 13, 2011 V.8
 Product specification 13
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

Size 0603 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR

YNM0045
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

Size 0805 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR

YNM0046
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

www.yageo.com
Oct 13, 2011 V.8
 Product specification 14
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

Size 1206 1 µF / 25 V
Solid lines: Impedance / Dotted lines: ESR

YNM0048
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

Size 1206 10 µF / 10 V
Solid lines: Impedance / Dotted lines: ESR

YNM0044
100.00

Z
(Ω)

10.00

1.00

0.10

0.01

0.00
0.01 0.10 1.00 10.00 f (MHz) 100.00

Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors

www.yageo.com
Oct 13, 2011 V.8
 Product specification 15
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

SOLDERING RECOMMENDATION
Table 8
SOLDERING SIZE
METHOD 0402 0603 0805 1206 ≥ 1210
Reflow ≥ 0.1 µF ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only
Reflow/Wave < 0.1 µF < 1.0 µF < 2.2 µF < 4.7 µF ---

TESTS AND REQUIREMENTS

Table 9 Test procedures and requirements
TEST TEST METHOD PROCEDURE REQUIREMENTS
Mounting IEC 60384- 4.3 The capacitors may be mounted on printed-circuit boards or No visible damage
21/22 ceramic substrates

Visual Inspection 4.4 Any applicable method using × 10 magnification In accordance with
and Dimension specification
Check

Capacitance (1) 4.5.1 Class 2: Within specified tolerance

At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C

Dissipation 4.5.2 Class 2: In accordance with

Factor (D.F.) (1) At 20 °C, 24 hrs after annealing specification
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C

Insulation 4.5.3 At Ur (DC) for 1 minute In accordance with

Resistance specification

NOTE:
1. For individual product specification, please contact local sales.

www.yageo.com
Oct 13, 2011 V.8
 Product specification 16
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

TEST TEST METHOD PROCEDURE REQUIREMENTS

Temperature IEC 60384- 4.6 Class 2: <General Purpose series>
Characteristic 21/22 Between minimum and maximum temperature ∆C/C
X7R: -55 °C to +125 °C Class 2:
Normal Temperature: 20 °C X7R: ±15%

<High Capacitance series>

∆C/C
Class 2:
X7R: ±15%

Adhesion 4.7 A force applied for 10 seconds to the line joining the Force
terminations and in a plane parallel to the substrate size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N

Bond Strength 4.8 Mounting in accordance with IEC 60384-22 paragraph No visible damage
of Plating on 4.3
End Face <General Purpose series>
Conditions: bending 1 mm at a rate of 1 mm/s, radius jig
340 mm ∆C/C
Class2:
X7R: ±10%

<High Capacitance series>

∆C/C
Class2:
X7R: ±10%

Resistance to 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for Dissolution of the end face plating shall
Soldering Heat 24 ±1 hours at room temperature not exceed 25% of the length of the
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 edge concerned
minute
Preheating: for size >1206: 100 °C to 120 °C for 1 <General Purpose series>
minute and 170 °C to 200 °C for 1 minute
∆C/C
Solder bath temperature: 260 ±5 °C Class2:
Dipping time: 10 ±0.5 seconds X7R: ±10%
Recovery time: 24 ±2 hours <High Capacitance series>
∆C/C
Class2:
X7R: ±10%

D.F. within initial specified value

Rins within initial specified value

www.yageo.com
Oct 13, 2011 V.8
 Product specification 17
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

TEST TEST METHOD PROCEDURE REQUIREMENTS

Solderability IEC 60384- 4.10 Preheated to a temperature of 80 °C to 140 °C and The solder should cover over 95% of the
21/22 maintained for 30 seconds to 60 seconds. critical area of each termination

Test conditions for lead containing solder alloy

Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1

Test conditions for lead-free containing solder alloy

Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1

Rapid Change of 4.11 Preconditioning; No visual damage

Temperature 150 +0/–10 °C for 1 hour, then keep for
24 ±1 hours at room temperature <General Purpose series>
∆C/C
5 cycles with following detail:
Class2:
30 minutes at lower category temperature
30 minutes at upper category temperature X7R: ±15%

<High Capacitance series>

Recovery time 24 ±2 hours
∆C/C
Class2:
X7R: ±15%

D.F. meet initial specified value

Rins meet initial specified value

www.yageo.com
Oct 13, 2011 V.8
 Product specification 18
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

TEST TEST METHOD PROCEDURE REQUIREMENTS

Damp Heat IEC 60384- 4.13 1. Preconditioning, class 2 only: No visual damage after recovery
with Ur Load 21/22 150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp <General Purpose series>
2. Initial measure: ∆C/C
Spec: refer to initial spec C, D, IR Class2:
3. Damp heat test: X7R: ±15%
500 ±12 hours at 40 ±2 °C; D.F.
90 to 95% R.H. 1.0 Ur applied Class2:
4. Recovery: X7R: ≤ 16V: ≤ 7%
Class 2: 24 ±2 hours ≥ 25V: ≤ 5%
5. Final measure: C, D, IR Rins
Class2:
P.S. If the capacitance value is less than the X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s
minimum value permitted, then after the other whichever is less
measurements have been made the capacitor
shall be preconditioned according to “IEC 60384 <High Capacitance series>
4.1” and then the requirement shall be met.
∆C/C
Class2:
X7R: ±20%
D.F.
Class2:
X7R: 2 x initial value max
Rins
Class2:
X7R: 500 MΩ or Rins x Cr ≥ 25s
whichever is less

www.yageo.com
Oct 13, 2011 V.8
 Product specification 19
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

TEST TEST METHOD PROCEDURE REQUIREMENTS

Endurance IEC 60384- 4.14 1. Preconditioning, class 2 only: No visual damage
21/22 150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp <General Purpose series>
2. Initial measure: ∆C/C
Spec: refer to initial spec C, D, IR Class2:
3. Endurance test: X7R: ±15%
Temperature: X7R: 125 °C D.F.
Specified stress voltage applied for 1,000 hours: Class2:
Applied 2.0 x Ur for general products X7R: ≤ 16V: ≤ 7%
Applied 1.5 x Ur for high cap. products ≥ 25V: ≤ 5%
4. Recovery time: 24 ±2 hours Rins
5. Final measure: C, D, IR Class2:
X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
P.S. If the capacitance value is less than the minimum whichever is less
value permitted, then after the other measurements
have been made the capacitor shall be preconditioned <High Capacitance series>
according to “IEC 60384 4.1” and then the ∆C/C
requirement shall be met.
Class 2:
X7R: ±20%
D.F.
Class 2:
X7R: 2 x initial value max
Rins
Class 2:
X7R: 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less

Voltage Proof IEC 60384- 4.6 Specified stress voltage applied for 1 minute No breakdown or flashover
1 Ur ≤ 100 V: series applied 2.5 Ur
100 V < Ur ≤ 200 V series applied (1.5 Ur + 100)
200 V < Ur ≤ 500 V series applied (1.3 Ur + 100)
Ur > 500 V: 1.3 Ur
I: 7.5 mA

www.yageo.com
Oct 13, 2011 V.8
 Product specification 20
20
Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V

REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 8 Oct 13, 2011 - - Dimension updated

Version 7 Jan 13, 2011 - - Dimension updated

Version 6 Oct 13, 2010 - - Rated voltage of 0201 extend to 50 V

- Capacitance range of 0201 X7R 6.3V to 16V extend to 100 pF
- Capacitance range of 0805 X7R 10V extend to 10 µF
- Capacitance range of 0805 X7R 50V extend to 1 µF
- Capacitance range of 1210 X7R 10V extend to 22 µF
- Figures of impedance ESR updated

Version 5 Jul 27, 2010 - - Dimension on 0603 and 1206 case size updated

Version 4 Apr 21, 2010 - - The statement of "Halogen Free" on the cover added
- Dimension updated
Version 3 Oct 26, 2009 - - Capacitance range of 0402 X7R 25 V extend to 100 nF

Version 2 May 11, 2009 - - Product range updated

Version 1 Apr 24, 2009 - - Ordering code updated

Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X7R series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to-
100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11,
UY-X5R_X7R_HighCaps_6.3-to-25V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen Free compliant" added
- Test method and procedure updated

www.yageo.com
Oct 13, 2011 V.8