Page 1

Name of the work :- Proposed building (Civil Work)

I. No. Description of item Quantity Unit Rate Amount

A: Excavation

1 Excavation for foundation in earth, soil of all types,

sand, gravel and soft murum / hard murum ,
including removing the excavated material up to a
distance of 50 m. beyond the building area &
stacking and spreading as directed, dewatering,
preparing the bed for the foundation and necessary
backfilling, ramming, watering including shoring and
strutting etc. complete. By Mechanical Means. With
Lift upto 1.5 m.

#REF! ### 200 #REF!

2 Excavation for foundation in soft rock or old cement

or lime masonry foundations including removing the
excavated materials upto a distance of 50 metres
beyond the building area and stacking as directed
including dewatering, preparing the bed for the
foundation and necessary back filling with available
earth murum, ramming, watering including shoring
and strutting etc. complete. By Mechanical Means.
With Lift upto 1.5 m. #REF! ### 450 #REF!

3 Excavation for foundation in hard rock by chiselling,

wedging, line drilling, etc. including trimming and
levelling the bed, removing the excavated materials
upto a distance of 50 metres beyond the building
area, stacking as directed, dewatering and
backfilling with available earth / murum ramming,
watering complete. With Lift upto 1.5 m. #REF! ### 1250 #REF!

4 Providing antitermite treatment for foundation and

plinth by treating soil and back filling material in
immediate contact of foundation by spreading 0.5%
emulsion concentrate with the insecticide like
chloropyrip as Heptachlor, chlordane or as specified
in I.S. 6313 (Part II & III) : 1981 at the rate of 5 litres
per square metre area including all material, labour,
equipments etc. complete covering 10 years
guarantee on stamp paper for termite resistance
(Mode of measurement : Plinth area) #REF! ### 62 #REF!

Total of A #REF!

B: Murum filling and soling

 Page 2

I. No. Description of item Quantity Unit Rate Amount

5 Filling in plinth and floors with approved
excavated materials in 15 cm to 20 cm layers
including watering and compaction complete. Spec.
No. : Bd.A.10 Page No. 262 #REF! ### 136 #REF!

6 Filling in plinth and floors with contractor's soil,

sand or murum approved by Engineer-in-charge in
15 cm to 20cm. layers including watering and
compaction complete. Spec. No. : Bd.A.11 Page No.
263 #REF! ### 550 #REF!

7 Carrying away and disposing the excess and

unusable excavated material by mechanical
transport including loading, traspotation up to point
of disposal, unloading, and levelling the same at
point of disposal as directed, with all leads and lifts
at all levels upto lead of 5.0 kms. etc. complete.
(Spec. As directed by Engineer In Charge) #REF! ### 125 #REF!

8 Providing and laying rubble stone soling 230mm

thick as directed, binding with soft murum /
screened stone cheaps, compacting the same with
power roller or vibratory compactor to the
satisfaction of Engineer In Charge , including the
cost of bailing out water from foundation trenches,
pits etc using engine and pump, and/or motor and
pump of suitable capacity including hire charges for
machinery, errction cost, cost of fuel and oil, power,
labour etc complete. #REF! ### 1131 #REF!

Total of B #REF!

C: Plain cement concrete

9 Providing and laying in situ cement concrete M-10 /

1:3:6 of trap / granite / quartzite / gneiss metal for
foundation and bedding including bailing-out water
manually formwork, compacting, covering newly laid
concrete by gunny bag, plastic or tarpaulin, curing
etc. complete. (Wooden planks / shuttering will not
be allowed) Spec. No. : Bd.E.1 Page No. 287 / IS
456:2000 #REF! ### 3953 #REF!

10 Providing and laying in situ cement Plum concrete

M-10 / 1:3:6 of trap / granite / quartzite / gneiss
metal for foundation and bedding including bailing-
out water manually formwork, compacting, covering
newly laid concrete by gunny bag, plastic or
tarpaulin, curing etc. complete. (Wooden planks /
shuttering will not be allowed) Spec. No. : Bd.E.1
Page No. 287 / IS 456:2000 #REF! ### 3550 #REF!

11 Providing and laying damproof course 35mm

thick in Shahabad stone layer and bitumen felt /
using cement with waterproofing compound. Spec.
No. : Bd.J.2 Page No. 355 855.00 Sqm 900 769,500
 Page 3

I. No. Description of item Quantity Unit Rate Amount

Total of C #REF!
 Page 4

I. No. Description of item Quantity Unit Rate Amount

D: Reinforced cement concrete

Following RCC Item rates shall be quoted as

shown in drawings at any height and including
cost of cement & steel.

12 Providing and laying in situ cement concrete M-30

of trap/granite/quartzite/gneiss metal for R.C.C.
work in foundations like raft, strip foundations,
grillage and footings of R.C.C. columns and steel
stanchions including bailing out water manually,
compaction and curing roughening the surface if
special finish is to be provided etc. complete. #REF! ### 8371 #REF!

13 Providing and casting in situ cement concrete M 30

of trap granite/quartzite/gneiss metal for R.C.C.
columns as per detailed designs and drawings or
as directed including centering, formwork, of ply
wood /steel compacting finishing the formed surface
with CM 1:3 of sufficient minimum thickness to give
a smooth and even surface or roughening if special
finish is to be provided and curing (Excluding
reinforcement & Structural steel )
i) Columns upto Plinth level #REF! ### 11097 #REF!

#REF! #REF! ### 11097 #REF!

#REF! #REF! ### 15641 #REF!

#REF! #REF! ### 11097 #REF!

#REF!

14 Providing and casting in situ cement concrete M 30

of trap granite/quartzite/gneiss metal for R.C.C.
beams and lintels as per detailed designs and
drawings or as directed including centering,
formwork, of ply wood /steel compacting finishing
the formed surface with CM 1:3 of sufficient
minimum thickness to give a smooth and even
surface or roughening if special finish is to be
provided and curing (Excluding reinforcement &
Structural steel )
i) Ground beams / Plinthbeams #REF! ### 10643 #REF!

#REF! #REF! ### 11097 #REF!

#REF! #REF! ### 11097 #REF!

#REF! #REF! ### 15641 #REF!

#REF! #REF! ### 11097 #REF!

#REF!
 Page 5

I. No. Description of item Quantity Unit Rate Amount

15 Providing and casting in situ cement concrete of M-
30 grade of trap granite / quartzite / gneiss metal for
R.C.C. slabs and landings as per detailed designs
and drawings or as directed including centering,
formwork of steel, compaction, covering newly laid
concrete by gunny bag, plastic or tarpaulin, finishing
the formed surface with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and
even surface or roughening if special finish is to be
provided and curing etc. complete. (Excluding
reinforcement. The cement mortar 1:3 plaster is
considered for rendering uneven and honeycombed
surface only. )

#REF! #REF! ### 11097 #REF!

#REF! #REF! ### 11097 #REF!

#REF! #REF! ### 15187 #REF!

Provision of all platforms and accesses (in accordance with
safety regulations) adjacent to all anchorages for access to
facilitate the sub contract works (according to PT agency
requirements). When necessary, platforms should have
necessary weather required. #REF!

16 Providing and casting in situ cement concrete of M-

30 grade of trap granite / quartzite / gneiss metal
for R.C.C. waist slabs and steps as per detailed
designs and drawings or as directed including
centering, formwork of steel, compaction, covering
newly laid concrete by gunny bag, plastic or
tarpaulin, finishing the formed surface with cement
mortar 1:3 of sufficient minimum thickness to give a
smooth and even surface or roughening if special
finish is to be provided and curing etc. complete.
(Excluding reinforcement. The cement mortar 1:3
plaster is considered for rendering uneven and
honeycombed surface only. Wooden planks /
shuttering will not be allowed) #REF! ### 13824 #REF!

17 Providing and casting in situ cement concrete of M-

30 grade of trap granite / quartzite / gneiss metal for
R.C.C. chhajja as per detailed designs and
drawings or as directed including centering,
formwork of steel, compaction, covering newly laid
concrete by gunny bag, plastic or tarpaulin, finishing
the formed surface with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and
even surface or roughening if special finish is to be
provided and curing etc. complete. (Excluding
reinforcement. The cement mortar 1:3 plaster is
considered for rendering uneven and honeycombed
surface only. Wooden planks / shuttering will not be
allowed) #REF! ### 9734 #REF!
 Page 6

I. No. Description of item Quantity Unit Rate Amount

18 Providing and casting in situ cement concrete of M-
30 grade of trap granite / quartzite / gneiss metal for
R.C.C. pardi upto 150mm thickness as per
detailed designs and drawings or as directed
including centering, formwork of steel, compaction,
covering newly laid concrete by gunny bag, plastic
or tarpaulin, finishing the formed surface with
cement mortar 1:3 of sufficient minimum thickness
to give a smooth and even surface or roughening if
special finish is to be provided and curing etc.
complete. (Excluding reinforcement. The cement
mortar 1:3 plaster is considered for rendering
uneven and honeycombed surface only. ) #REF! ### 12006 #REF!

19 Providing and casting in situ cement concrete of M-

30 grade of trap granite / quartzite / gneiss metal for
R.C.C. pardi upto 300mm thickness as per
detailed designs and drawings or as directed
including centering, formwork of steel, compaction,
covering newly laid concrete by gunny bag, plastic
or tarpaulin, finishing the formed surface with
cement mortar 1:3 of sufficient minimum thickness
to give a smooth and even surface or roughening if
special finish is to be provided and curing and fixing
A.C./UPVC pipe of 100mm. dia. for weep holes. For
returns and retaining wall etc complete. (Excluding
reinforcement. The cement mortar 1:3 plaster is
considered for rendering uneven and honeycombed
surface only. Wooden planks / shuttering will not be
allowed) #REF! Cum 12460 #REF!

20 Providing and casting in situ cement concrete of M-

20 grade of trap granite / quartzite / gneiss metal for
R.C.C. coping to plinth or parapet and sills of doors
and windows moulded as per detailed designs and
drawings or as directed including centering,
formwork of steel, compaction, covering newly laid
concrete by gunny bag, plastic or tarpaulin, finishing
the formed surface with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and
even surface or roughening if special finish is to be
provided and curing etc. complete. (Excluding
reinforcement. The cement mortar 1:3 plaster is
considered for rendering uneven and honeycombed
surface only. Wooden planks / shuttering will not be
allowed) Spec. No. : Bd.F.12 Page No. 304 / IS
456:2000 #REF! ### 10693 #REF!
 Page 7

I. No. Description of item Quantity Unit Rate Amount

21 Providing and laying RCC M-25 of 150 mm thick
for flooring by TREMIX VACCUME DEWATERING
METHOD, including laying the floor in alternate
panels as directed, (Using MS Chanels for support),
Vibrating the concrete with skid vibrators, placing 6
mm / 12 mm thick HD Thermacol for joints of
alternate panels, and providing & fixing 20 mm dia
and 20 Cm. Length PVC Pipes over 16 mm dia plain
MS bars of 40 cm. Length in expansion joint
including PVC Pipes, MS bars, filling the gap
between pipe and bar with grease, fixing, binding
etc, cutting grooves, filling back the groove with
Polysulphide sealent, watering, curing, compaction
etc complete as directed by Architect. #REF! ### 6811 #REF!

22 Extra over rate difference for R.C.C. items using

READY MIX CONCRETE including necessary
pumping and pipes with test certificate etc.
complete. (Rates are extra over all specified RCC
items)
M30 Grade #REF! Cum 314 #REF!

23 Providing expansion joints in R.C.C. framed

structure (at floor level) with premoulded filler 25mm
thick and 1.6mm thick aluminium plate as required,
bitumen poured filler and fixing T.W. battens on rear
faces etc. complete as directed. Spec. No. : Bd.K.1 #REF! ### 1037 #REF!

24 Providing and Fixing in position mild steel/ HYSD

bar reinforcement of various diameters for R.C.C.
pile caps, footings, foundations, slabs, beams
columns, canopies, staircase, newels, chajjas,
lintels pardis, copings, fins, arches, Trimix etc. as
per detailed designs, drawings and schedules
including cutting, bending, hooking the bars, binding
with wires or tack welding and supporting as
required completed. #REF! ### 55944 #REF!

25 Providing, fabricating and erecting at site of work

the tubular/ rectangular hollow steel structure of
standard size as per standard design and
specifications, having various spans ranging from 6
m to 18 m length, in between trusses and in
multiples of standard length of bays as specified, as
per standard specifications inclusive of cost of steel
tubular/ rectangular hollow trusses, tubular columns
(3.5 m height), purlins, tie runners, foundation bolts,
base plates, nuts & bolts, welding wherever required
etc. as per detailed drawing inclusive one coat of
anticorosive paint and two coats of oil painting of
approved quality and shade complete. Sp. No.: As
directed by Engineer In Charge

#REF! MT 96096 #REF!

Total of D #REF!
 Page 8

I. No. Description of item Quantity Unit Rate Amount

E: Masonry works

NOTE : Work to be done at all heights & levels

as shown in drawings.

26 Providing second class Burnt Brick masonry with

conventional/ I.S. type bricks in cement mortar
1:6 in foundations and plinth of inner walls/in
plinth external walls including bailing out water
manually, striking joints on unexposed faces, raking
out joints on exposed faces and watering Complete. #REF! ### 5010 #REF!

27 Providing second class Burnt Bricks masonry/ Fly

ash Brick masonry with conventional/I.S. type bricks
in cement mortar 1:6 in superstructure including
striking joints, raking out joints, watering and
scaffolding complete. #REF! ### 5192 #REF!

28 Providing second class Burnt Bricks masonry/Fly

ash Brick masonry with conventional/I.S. type bricks
in cement mortar 1:4 in half brick thick wall
including mild steel longitudinal reinforcement of 2
bars of 6 mm diameter/2 hoop iron strips 25 mm X
1.6 mm at every third course, properly bent and
bounded at ends scaffolding, racking out joints and
watering complete. (Excluding cost of
reinforcement). #REF! ### 630 #REF!

29 Providing second class Burnt Bricks masonry/Fly

ash Brick masonry with conventional/I.S. type bricks
in cement mortar 1:4 in 150mm thick wall
including mild steel longitudinal reinforcement of 2
bars of 6 mm diameter/2 hoop iron strips 25 mm X
1.6 mm at every third course, properly bent and
bounded at ends scaffolding, racking out joints and
watering complete. (Excluding cost of
reinforcement). #REF! Sqm 896 #REF!

30 Providing second class Burnt Bricks masonry/ Fly

ash Brick masonry with RAT BOND MASONRY in
cement mortar 1:6 in superstructure including
striking joints, raking out joints, watering and
scaffolding complete. [The bricks are placed in
vertical position, so that 110 mm face is seen from
front elevation, instead of the 75mm face
(considering brick of standard size 230 X 110 X 75
mm). Since width of wall remains 230mm, an
internal cavity is created.]

#REF! #REF! ### 4714 #REF!

#REF! #REF! ### 4714 #REF!

#REF! #REF! ### 4714 #REF!

 Page 9

I. No. Description of item Quantity Unit Rate Amount

31 Providing 230mm thick Autoclave concrete light
weight block masonry with chemical mortar.
(Ultratech make) (As directed by the Architects) #REF! ### 6199 #REF!

32 Providing uncoursed rubble masonry of trap/

granite/ quartzite/ gneiss stones in cement
mortar 1:6 in foundations and plinth of inner
walls/in plinth of external walls including bailing out
water manually, striking joints on unexposed faces
and watering complete. #REF! ### 3637 #REF!

33 Providing uncoursed rubble masonry of trap/

granite/ quartzite/ gneiss stones in cement
mortar 1:6 in superstructure including raking out
joints when plastering is to be done/striking joints
when no plastering is to be done watering and
scaffolding. complete #REF! ### 3729 #REF!

34 Providing Sunk pointing with cement mortar 1:3 for

stone masonry work including scaffolding and curing
complete. Sp. No.: Bd.L.16/373 #REF! Sqm 350 #REF!

Total of E #REF!

F: Waterproofing

35 Providing and fixing 40 to 50 millimetre thick rough

shahabad box type waterproofing for basement
or underground floor or as specified on a base of
cement concrete 1:3:6, including sub base of 2.5
centimetre thick cement mortar 1:3 with conseal,
setcrete (RMW), Algiproof or other alike water
proofing liquids, raking of joints upto 35 millimetre
depth, filling the joints with 6 millimetre size crushed
metal, hand grouting with cement slurry, curing and
cleaning, with 7 years guarantee on court fee stamp
of Rs.100/- with ponding test etc. complete.
(excluding cement concrete 1:3:6 base concrete)
(Prior permission of Architect shall be obtained
before execution.) Spec. No. : As directed by
Engineer in charge.

#REF! Sqm 950 #REF!

 Page 10

I. No. Description of item Quantity Unit Rate Amount

36 Providing and fixing 20 to 25 millimetre thick rough
shahabad box type water proofing treatment to
vertical outside faces of Reinforced Cement
Concrete walls of basements / underground floors
including filling the gap of 25 millimetre between
rough shahabad and Reinforced Cement Concrete
wall with cement grout mixed with water proofing
liquid Algiproof or alike with one tile lift method,
brushing the joints horizontally with cement slurry
mixed with water proofing liquid for width 30 to 35
millimetre and sloping coping over topmost tile with
cement mortar 1:3, butting the bottom most with
cement concrete 1:2:4 mixed with water proofing
liquid, curing, with 7 years guarantee on court fee
stamp of Rs.100/- with ponding test etc. complete.
(Prior permission of Architect shall be obtained
before execution.) Spec. No. : As directed by
Engineer in charge.

#REF! Sqm 850 #REF!

37 Providing waterproofing treatment to floors and

sanitary blocks (India water proofing or alike)
consisting of one layer of B.B. coba of 5 cm to 7.5
cm thick in cement mortar 1:2 sandwiched between
two layers of cement mortar 1:4, 20 mm thick mixed
with water proofing compound, top finishing coat of
cement slurry 6 to 12 mm thick with water proofing
compound etc. complete with 32 mm dia. PVC
pressure relief pipe of adequate length including
waterproofing treatment to 30 cm height of wall in
cement mortar 1:4 and covering 7 years guarantee
on court fee stamp of Rs.100 with ponding test
including all lead, lift etc. complete. Additional Item
Spec. No. : As directed by Engineer in charge. #REF! ### 4000 #REF!

38 Providing water proofing treatment for flooring

of Bath and WC 25 mm thick in C.M. 1:3 including
using 1 Kg of water proof compound per bag of
cement with 7 years guarantee on court fee stamp
of Rs, 100/- with ponding including levelling, curing
etc. complete. Sp. No.: Additional item - as directed
by Architect.

#REF! Sqm 550 #REF!

 Page 11

I. No. Description of item Quantity Unit Rate Amount

39 Providing cement based water proofing treatment
to terrace (India water proofing or alike) with brick
bats laid in required slope to drain the water for any
span after cleaning the base surface, applying a
coat of cement slurry and mixed with approved
water proofing compound and laying the brick bats
on bottom layer of c.m. (1:5) and mixed with
approved water proofing compound, filling upto half
depth of brick bats, curing this layer for 3 days,
applying cement slurry over this layer, jointing of
brick bats with c.m. 1:3 and mixed with approved
water proofing compound and finally top finishing
with average 20 mm thick layer of same mortar
including finishing the surface smooth with cement
slurry mixed with approved water proofing
compound, marking the finished surface with false
squares of 300mm x 300mm, making the junctions
at the parapets rounded and tapered towards top for
required height with drip mould at the junction of
plaster and curing etc., covering 7 years guarantee
on Court Fee Stamp paper of Rs.100/- including
ponding test etc. complete. Additional Item Spec.
No. : As directed by Engineer in charge. #REF! ### 882 #REF!

Total of F #REF!

G: Plastering and painting

NOTE : Work to be done at all heights & levels

as shown in drawings.

40 Providing internal cement plaster 10mm to 12 mm

thick in single coat in cement mortar 1:4
WITHOUT neeru finish to concrete or brick
surfaces, in all positions including scaffolding and
curing complete.

#REF! #REF! ### 456 #REF!

#REF! #REF! ### 456 #REF!

#REF! #REF! ### 456 #REF!

41 Providing neeru finish to plastered surfaces in a all

positions except ceiling including scaffolding and
curing complete. #REF! Sqm 15 #REF!
 Page 12

I. No. Description of item Quantity Unit Rate Amount

42 Providing & applying Gypsum Plaster (Stucco) on
plastered surface having 12-15 mm thickness
including required bonding agent, scaffolding etc.
complete. #REF! ### 350 #REF!

43 Providing sand faced plaster externally in cement

mortar using Kharsalia / Kasaba or similar type of
sand, in all positions including base coat of 15mm
thick in C.M. 1:4 using waterproofing compound at
1kg.per cement bag, curing the same for not less
than 3 days and keeping the surface of the base
coat rough to receive the sand faced treatment 6 to
8mm thick in C.M. 1:4, finishing the surface by
taking out grains and curing for fourteen days,
scaffolding and 30cm width chicken mesh of 22
gauge of approved quality over joints of R.C.C.
member and brick wall including fixing of mesh,
necessary nailing, drilling, tying etc. complete. Spec.
No. : Bd.L.7 Page No. 369

#REF! #REF! ### 555 #REF!

#REF! #REF! ### 555 #REF!

44 Providing and applying washable oil-bound

distemper of approved colour and shade to old and
new surfaces in two coats including scaffolding,
preparing the surfaces. (including the primer coat)
complete. #REF! ### 132 #REF!

45 Providing and applying two coats of water proof

cement paint on one coat of white cement paint to
substructure/super structure of approved
manufacture and of approved colour to the exposed
surfaces including scaffolding if necessary, including
primer coat cleaning and preparing the surface,
watering for two days complete. (Sample and brand
is to be got approved from Architect before use)
Spec.No. : Bd.O.8 Page No. 406 #REF! ### 84 #REF!

46 Providing and applying two coats of synthetic

enamel paint of approved colour to new/old
structural steel work and wood work in buildings
including scaffolding if necessary,cleaning and
preparing the surface complete.
#REF! ### 104 #REF!

47 Providing and applying 2 coats of flat oil paint of

approved colour and shade to internal/external
plastered surfaces including one coat of primer and
two coat of oil paint with putty finish including
scaffolding if necessary, cleaning and preparing the
surface (including primer coat) complete.

#REF! Sqm 208 #REF!

Total of G #REF!

H: Flooring
 Page 13

I. No. Description of item Quantity Unit Rate Amount

48 Providing and fixing Vitrified tiles of approved

quality 605 x 605 x 10mm for flooring in required
position laid on a bed of 1:4 cement mortar
including cement float, filling joint with white/colour
cement slurry cleaning curing complete. (Johnson
Endura Antiskid Ivory shade, second grade, Basic
Rate : Rs. 50/- SFT.) #REF! ### 1344 #REF!

49 Providing and fixing Vitrified tiles of approved

quality 605 x 605 x 10mm for Dado in required
position laid on a bed of 1:4 cement mortar
including cement float, filling joint with white/colour
cement slurry cleaning curing complete. (Johnson
Endura Antiskid Ivory shade, second grade, Basic
Rate : Rs. 50/- SFT.) #REF! ### 1327 #REF!

50 Providing and laying machine cut machine Polished

Kota stone flooring in required width in plain/
diamond pattern on bed of 1:6 Cement mortar
including cement float, filling joints with neat cement
slurry, curing, polishing and cleaning complete.
#REF! ### 950 #REF!

51 Providing mirror finishing to stone flooring as

directed by the Engineer-in-charge including all
labour, material etc. complete. #REF! ### 200 #REF!

52 Providing and laying polished Kotah stone slabs 20

to 25 mm thick for treads and riser of steps and
staircases, with rounded nosing for the treads on a
bed of 1:4 cement mortar including cement float,
filling joints with neat cement slurry, curing, polishing
and cleaning complete. Spec. No. : Bd.M.22 Page
No. 390 #REF! ### 2152 #REF!

53 Providing & Fixing 80mm thk. Factory made,

hydraulically prssed, mechanically vibrated &
compacted Pre cast Intelocking Cement Concrete
Paving blocks in M-40 grade of approved size &
shape a specified, 50mm in grey cement & top
surface 10mm in white cement with colour pigment
including cost of all materials, manufacturing,
curing, transportation of blocks to work site including
loading, unloading & stacking as directed, laying
paving blocks in position over prepared bed of sand
of 50mm thickness including necessary excavation
in all stratas, spreading blindage of fine sand over
the prepared bed, compacting blocks by plate
vibrator etc. complete. #REF! ### 700 #REF!

54 Providing and applying epoxy floor coating 3mm

thick to entire after surface preparation application
of primer as per Mfg. Instructions and applying two
coats of epoxy floor coating comprising of razin and
hardner in proportion as per Mfg. Instructions &
specifications etc. complete. QRO Sqm 350 -
 Page 14

I. No. Description of item Quantity Unit Rate Amount

Total of H #REF!

I: Doors and Windows

55 Providing and fixing MS Grill door 22 to 24 Kg /

Sqm of various sizes as per detailed drawing with
iron oxidised fixtures and fastnening and one coat of
red lead primer and three coat of synthetic enamel
paint of approved colour and shed etc complete.
#REF! ### 3500 #REF!

56 Providing and fixing M.S. Z type window /

ventilator in cross bracing embeded in wall of 25 x
25 x 5mm ahemadabad section including 12mm
thick square section bar @ 150 c/c, 3.5mm thk.
Obsquired (bajri) glass panel fixed, horizontally
placed 16 gauge 3mm dia. perforated sheet panel
etc. complete as per given drawing and design and
instructed by Architect. #REF! ### 2772 #REF!

57 Providing and Constructing window sills/ door

frames/ ledges of width 50mm to 300mm or as
specified in two steps & bevelled edge on one side /
moulding on one side as per detailed Architectural
drawings etc.complete as directed including usage
of nails, areldite, sand etc. complete. (Basic rate of
granite Rs. 90/Sft) #REF! ### 4508 #REF!

58 Providing & Fixing Factory made precast

door/window frames of C.C. M-40 grade of section
100mm x 60mm including reinforcement as per
I.S.6523 with polymeric blocks having screw holding
capacity of 250 kg/screw fixed in position in RCC
frame as per requirement and as per specifications
without fan light including holdfasts, carting and
erecting in position and two coats of oil paint
etc.complete Sp.No.: As directed by Architect. #REF! ### 350 #REF!

59 Providing and fixing solid core waterproof flush

door with Commercial ply in single leaf 35 mm
thick as per detailed drawing in 1mm thick laminate
finish of approved colour for outside and 2mm thk.
bakelite sheet of approved shade and make on
inside surfaces in the positions shown on the
drawing or as directed, all necessary beads in 30 x
15mm BTC edge finish with enamel paint,
mouldings and lipping, mortise lock, 5mm thk.
obsquared glass panel with t.e. beading, brass or
S.S. hinges and T.W. bottom of 30 50mm,
aluminium fixtures and fastenings on both sides and
finishing complete. (without door frame). (Sample
and brand is to be got approved from Architect
before use) #REF! ### 7165 #REF!
 Page 15

I. No. Description of item Quantity Unit Rate Amount

60 Providing and fixing solid core waterproof flush
door with Commercial ply in single leaf 35 mm
thick as per detailed drawing in 1mm thick laminate
finish for both sides of approved colour and make
in the positions shown on the drawing or as
directed, all necessary beads in BTC edge finish
with enamel paint, mouldings and lipping, mortise
type door handel lock of inox approved make, 6mm
thk. plain glass with film (frost) with t.e. beading,
bearing brass railway hinges, hydrolic type door
closer and necessary aluminium fixtures and
fastenings on both sides and finishing complete.
(without door frame). (Sample and brand is to be
got approved from Architect before use)

#REF! ### 8500 #REF!

61 Providing and fixing mild steel grill work railing

weighing 20 Kg/sqm. of rectangular hollow sections
with Pipe handrail as per drawing including newel
posts,etc. drilling holes in concrete/ other surface,
fabricating, fixtures, erecting grill work, necessary
welding, fixing by nuts and bolts, fixing Pipe handrail
with one coat of anti-corrosive paint and two coats
of oil painting with approved colour and shade,
remaking good the damaged surface, cleaning etc.
complete. Sp. No.: As directed by Engineer in
Charge & Architect

#REF! ### 2000 #REF!

62 Providing and fixing rolling steel shutters

fabricated from 18 Gauge galvanised strips with
side guides 100 / 150mm , bottom rail, brackets,
door suspension shaft, housing box at the top,
brackets between 12 - 14 gauge , springs in high
tensile coil including mechanical gear operation
system including 250mm dia. gear wheel with 21
teeth, cage of 25 x 8mm MS flat with ball bearings
and 48 outer dia. heavy pipe with heavy warm and
gear box for manual drive etc. complete with one
coat of anticorrosive primer coat and two coats of
synthetic enamal paint etc complete. (with
Mechanical Gear arrangement as per drawings
and as directed by the Architects.)

#REF! ### 2500 #REF!

63 Providing and fixing rolling steel shutters

fabricated from 18 Gauge steel laths with 150mm
guides, bottom rail with locking arrangement at the
end, brackets, door suspension shaft, housing box
at the top with all necessary fixtures etc. complete,
one coat of anticorrosive primer coat and two coats
of synthetic enamal paint etc complete. (with
Motorized Gear arrangement as per drawings
and as directed by the Architects. Cost of motor as
per below item)

#REF! ### 4000 #REF!

 Page 16

I. No. Description of item Quantity Unit Rate Amount

64 Providing and fixing motorised gear operation
system including three phase motor fu Chang or jie
long make, weight lifting capacity 1500 kgs, chain
over drive brackets, push button switch and chain
over-drive for manual operation during power failure
with all necessary fixtures etc. complete as directed
by Architect.
#REF! Nos. 55000 #REF!

65 Demolition & breaking of existing Brick

masonary at all heights (plastered/unplastered)
including stacking and disposing unserviceable
material outside factory premises with all leads &
lifts or as directed cleaning etc complete
#REF! ### 1000 #REF!

66 Breaking R.C.C. work manually / by mechanical

means, scaffolding, collecting at directed location
and carting away the debris out of factory premises,
cleaning, etc. complete. #REF! ### 1500 #REF!

67 Providing and fixing suspended false ceiling of

12.5mm thick gypsum board with galvanised iron
hanger ceiling section,necessary clips dry wall
screw required including framing,boarding, jointing
finishing filling joints, drilling holes including two
coats of primer and all transportation,scaffolding &
all necessary labour and machinery etc.comp.
#REF! ### 950 #REF!

68 Providing & Fixing on site at the specified locations

Concrete Kerbs of K.K. make includign all
materials, labour, tools & plants, excavation for the
same, fixing, refilling the excavated portion, all
applicable taxes, octroi, loading & unloading etc.
complete as directed by the Architect complete.

150.00 ### 800 120,000

69 Providing and fixing holes by core cutting, repairing

and plastering the surface etc. complete as directed
by engineer in charge.
a) 100mm dia. #REF! ### 1500 #REF!
b) 150mm dia. #REF! ### 2000 #REF!
c) 200mm dia. #REF! ### 2500 #REF!

70 Providing and laying concrete pipes (Socket &

Spigot pipes) of I.S. NP.2 class in proper line,
level and slope including necessary collars,
excavation, laying, fixing sockets, incl rubber ring
and refilling the trench complete. Sp. No.:
a) 150mm Dia. #REF! ### 1000 #REF!
b) 300mm Dia. #REF! ### 1400 #REF!
c) 450mm Dia. #REF! ### 1800 #REF!
d) 600mm Dia. #REF! ### 2200 #REF!

71 Dewatering including diversion of stream, etc. as

may be necessary for foundation and other parts of
work in B.C. soil, soft murum etc. and baliling
and pumping out water during and after
excavation as required. (unit per pump per day)

a) By Diesel pump QRO Day -

 Page 17

I. No. Description of item Quantity Unit Rate Amount

b) By Motor pump QRO Day -

Total of I #REF!

J : Sanitary Installation & Toilet Requisities

1 Providing & fixing in position white vitreous china

glazed ‘Orissa Pattern’ W.C. pan of size: 580 x
440 mm(Orissa squating pan with box rim) with “P”
or “S” trap, with 1:4:8 mix, P.C.C.bedding of 0.10 m
thickness, cutting, making good the necessary walls
with cement plaster of 1:4 mix with necessary
fittings, curing etc. including fixing concealed/open
type/ C.P. flush valve with 32mm size control cock &
required length operating lever assembly &
connecting its outlet to the W.C. pan etc. all
complete. 16 Nos 9000 144,000
NOTE:- i. Orissa pattern W.C. pan shall be of make
PARRYWARE with first quality.
ii. Sample of the W.C. pan shall be approved from
the Architect / Consultant prior to use.
iii. Flush valve shall be of MAKE “Hindware”
iv.W.C. pan and “P” or “S” trap joint shall be
checked prior to covering of it.
v. “P” or “S” trap shall be in P.V.C. as per Architect /
Consultant specifications.

2 Providing and fixing wall mounted closets of

Parryware or Hindustan Twyford Or Neycer make
including black plastic seat Commander make
including PVC slim type flush tank pee trap C.
I.bracket with C.P. bolt, matching seat cover & fixing
concealed /open type C.P. flush valve of jaquar
make with 32mm size control cock & required
fixtures etc. complete. 4 Nos 9000 36,000

3 Providing and fixing approved colour

Rectangular wash hand basin 550x 450mm
( Hindustan Twyford OR Parryware OR Nycer) to be
fixed on Granite Counter / M.S. supporting brackets,
screws, rubber plugs , C.P. stop cock & C.P. Prss
matic cock, C.P. waste coupling, outlet with
necessary 50mm G.I. pipe upto Nahani trap
with wall flange and C.P. connection etc. all
complete. 8 Nos 16500 132,000

4 Providing and fixing white vitreous medium flat

back urinal Hindustan Twyford no. 60.001
including 15 mm dia 'B'class G.I.connection from
flush tank to urinals C. P. stop cock, G.I.
50 mm dia outlet pipe concealed in walls upto floor
channel.( All concealed pipes to be bitumen
coated and wrapped with hessain cloth.) 12 Nos 4,950.00 59,400

5 Providing & fixing 600mm x 450mm mirror of

superior glass 6mm thick on 'D' bracktes etc.
complete 4 Nos 2000 8,000
 Page 18

I. No. Description of item Quantity Unit Rate Amount

NOTE:- .i.The mirror should be of make MODI
GUARD
ii Mirror should be fitted as per the Architect /
Consultant specifications.

6 Providing &fixing C.P. brass Towel Rail complete

with C.P.brass brackets fixed on wooden cleats with
C.P. brass screws etc.complete
a) size 600 x 20mm dia 2 Nos 1800 3,600

7 Providing & fixing Towel Ring.

JAQUAR(CONTINENTAL ) 2 Nos 1500 3,000

8 Providing & fixing Vitreous China recessed toilet

paper holder. 150 mm x 150mm 2 Nos 1800 3,600

9 Providing & fixing heavy duty C.P. roob hook

.MAKE- JAQUAR (CONTINENTAL). 2 Nos 550 1,100

10 Providing & fixing Soap Dish MAKE- JAQUAR

(CONTINENTAL). 4 Nos 1100 4,400

11 Providing & fixing in position Jet plate complete

with.½” Dia. Concle cock/ angle cock etc. all
complete 4 Nos 900 3,600
NOTE:- C.P. Fixtures should be of make Jaquar
(Florentine)

12 Providing 25/30 mm thick partitions of steel grey

granite of approved shapes, quality and colour for
urinals, including cutting holes of required sizes in
the appropriate places to receive pipes etc., fixing in
cement mortar 1:3 curing and cleaning complete.
(Basic rate Rs. 90/sft) 10.08 Sqm 3500 35,280

2) WATER SUPPLY

13 Providing & fixing in position CPVC pipe with all

fittings like bends, tees, elbows, union
etc.&concealing the pipes in the wall under the
floor,below the ground with excavation up to 1m
deep, also including making chases in the wall, en-
wrapping the pipes with hesain cloth soaked in
bitumen, fixing with Fitting & reinstating the wall
surface etc. complete as directed.
A)15 mm Dia. 15 Mtrs. 202 3,030
B)20 mm Dia. 15 Mtrs. 250 3,750
C)25 mm Dia. 15 Mtrs. 338 5,070
D)32 mm Dia. 15 Mtrs. 468 7,020
E)40 mm Dia. 15 Mtrs. 525 7,875
F)50 mm Dia. 15 Mtrs. 635 9,525
Note:- The pipes should be fitted properly as
instructed by theConsultant / Architect.
 Page 19

I. No. Description of item Quantity Unit Rate Amount

14 Providing & fixing in position lead free PVC pipes
for Domestic & Flushing water with all fitting like
bends, tees, reducers, elbows, unions etc. including
supporting on wall with clamps complete. Including
scaffolding & all testing after laying of pipes as
specified & including making holes in the walls or
floors as required & re-doing the same.Also
includes pipeline below ground with excavation upto
0.45mtr depth.
A) 15 mm Dia. 10 Mtrs. 160 1,600
B) 20 mm Dia. 10 Mtrs. 175 1,750
C) 25 mm Dia. 10 Mtrs. 200 2,000
D) 32 mm Dia. 15 Mtrs. 250 3,750
E) 40 mm Dia. 15 Mtrs. 300 4,500
F) 50 mm Dia. 15 Mtrs. 350 5,250
G) 63mm Dia. 10 Mtrs. 400 4,000
Note:- i PVC Pipe & Fittings should be lead free
Sch.40 of Make - ASTRAL AQUARIUS
ii The pipes should be fitted properly as instructed
by theConsultant / Architect & should be tested for
leakages at a pressure of 10 bar for 1 hour before
concealing the pipes.

15 Providing & fixing in position PVC Brass

Conversion Adaptors
A) 15 mm Dia. 2 Nos. 200 400
B) 20 mm Dia. 2 Nos. 250 500
C) 25 mm Dia. 2 Nos. 400 800
D) 32 mm Dia. 2 Nos. 600 1,200
E) 40 mm Dia. 2 Nos. 650 1,300
F) 50 mm Dia. 2 Nos. 1100 2,200
Note:- i PVC Adaptors should be lead free PVC of
Make - ASTRAL AQUARIUS
ii The pipes should be fitted properly as instructed
by the Consultant / Architect & should be tested for
leakages at a pressure of 10 bar for 1 hour .

16 Providing & fixing in position C.P. Bib Cock with

wall flange etc. all complete. 12 Nos 1500 18,000
NOTE:- Bib cock should be of MAKE -JAQUAR
(Florentine)

17 Providing & fixing in position tested heavy quality

Ball valve/ Non Return Valve with necessary
specials required etc. all complete.
A) 15 mm Dia Ball valve 5 Nos 2000 10,000
B) 20 mm Dia. Ball valve 5 Nos 2200 11,000
C) 25mm Dia Ball valve 5 Nos. 2400 12,000
D) 32mm Dia Ball valve 5 Nos. 2600 13,000
E) 40 mm Dia Ball valve 5 Nos. 3000 15,000
F) 50 mm Dia. Ball valve 5 Nos. 3200 16,000
Note:- i. Ball valve should be of MAKE-RUB/
ETAB(ITALY).

3) RAIN WATER & SEWERAGE SYSTEM

 Page 20

I. No. Description of item Quantity Unit Rate Amount

18 Providing, laying & jointing best quality rigid PVC

pipes of approved make with all fittings etc.for
waste drains from wash basins, sinks, etc. or vent
connections from sanitary fittings to vent pipe
including testing, etc. complete.
i) 40mm Dia. 50 Mtr 425 21,250
ii) 50mm Dia. 50 Mtr 600 30,000
iii) 63 mm Dia. 50 Mtr 750 37,500
NOTE - Rigid PVC pipe should be of MAKE - Prince
/ Supreme / Finolex having pressure withstanding
capacity of 10 kg / cm2

19 Providing, laying &jointing in position best quality

S.W.R. PVC soil,waste & vent pipes with all fitting
like junction of various angles, jointing with rubber
ring joints & sealents etc. complete & fixing on wall
or below floor with M.S./ P.V.C. clamps.
i) 75 mm dia 30 Mtr 461 13,830
ii) 110mm dia. 30 Mtr 579 17,370
iii) 160mm Dia. 30 Mtr 857 25,710
NOTE - SWR PVC pipe should be of MAKE - Prince
/ Supreme / Finolex having pressure withstanding
capacity of 4 kg / cm2

20 Providing & fixing 110mm Dia PVC 'p' trap

complete with necessary specials required.Fixing
best quality S.S. grating on the top. 10 Nos 1200 12,000

21 Providing & in position S.W.R. PVC floor trap with

necessary specials required.Fixing best quality S.S.
grating on top. 4 Nos 1500 6,000

22 Providing & fixing G.M.wheel valve of ISI Make.

a) 32mm dia 1.00 Nos 1,913.00 1,913

b) 25mm dia 1.00 Nos 1,200.00 1,200

23 Providing & fixing Non-return valve of ISI Make.

a) 25mm dia 1.00 Nos 800.00 800

24 Providing & fixing P.V.C. Nahani Trap 75 mm dia

including S.S. Grating 150mm x 150mm, P.V.C..
plug bend, P.V.C. pipe upto outside face of the wall. 8.00 Nos 135.00 1,080

25 Providing and fixing Half Turn concealed heavy

duty type flush valve of approved I.S.I. make. 2.00 Nos 3,645.00 7,290

26 Constructing brick masonry inspection Chambers

upto depth1.5 mtr including.
i.230mm thick brick masonry walls in cement
mortar 1:5
ii C.C. foundation bed in M-150 concrete, 150 thick
 Page 21

I. No. Description of item Quantity Unit Rate Amount

iii Cement plaster inside and outside in cement
mortar 1:3
iv. 150 thick C. C. cap on top
v.C.C. in haunches and channels finished smooth in
C.M. 1:2
vi.Heavy Duty R.C.C. Manhole cover with Frame.
vii. Excavating of soil including bailing out of water
by any means,if required.
viii.Back filling, consolidation,as directed.
ix.C.I. steps each @ 374 C to C.
A) 3’ x 1’6” 1 Nos. 10000 10,000
B) 3' x 2'.0" 1 Nos. 12000 12,000
C) 2’ x 2’0” 1 Nos. 9000 9,000
D)2’ x 1’6” 1 Nos. 8000 8,000
E)1’ x 1’0” 1 Nos. 6000 6,000
F) Grease Trap 1 Nos. 12000 12,000
G) Gully Trap 1 Nos. 2500 2,500
H) Soak pit size- 10'.0" x 10'.0" with filter chamber
2'.0" x 2'.0" 1 Nos. 40000 40,000

27 Constructing brick masonry conical manhole

1200mm dia at bottom and 530 mm dia.At top and
depth upto 2m including the following: 1 Nos. 10000 10,000
i.230 thick brick masonry walls in cement morter
1:5

ii.Cement Plaster inside and outside with cement

morter 1:3 with neat cement rendering.

iii.Circular 300 thick cement concrete foundation

bed extending 150 mm outside brick wall, in C.C.
M-150.

iv.75 mm wide cement mortar fillet (vata) all round

the external portion of manhole and concrete in
cement mortar 1:3

v.Cement concrete cap. 300 thick in M-150cement

concrete

vi.C.C.M150 in haunches and channels finished

smooth in C.M. 1:2

vii.Heavy Duty R.C.C. Manhole cover with Frame.

viii Excavating including bailing out of water by any

means,if required.

ix.Back filling, consolidation as directed.

x.C.I. steps each @ 374 C to C.

Total of J 879,943

Grand total #REF!

Basic Rates
 Page 22

I. No. Description of item Quantity Unit Rate Amount

Cement = 325 / bag
TOR Steel = 40,000 / MT
Structural steel = 60,000 / MT

NOTE :
1) ONLY SERVICE TAX WILL BE PAID EXTRA AT ACTUAL AS PER GOVT. RULES.
2) ALL OTHER TAXES, DUTIES, VAT, ESIC, PF ARE INCLUDED IN QUOTED RATES.
3) QUOTED RATES ARE INCLUDING COST OF CEMENT AND STEEL.

CONTRACTOR'S SEAL & SIGN

NAME OF CONTACT PERSON : _________________________

CONTACT NO. : _________________________

DESCRIPTION QUANTITY UNIT PRODUCTIVITY
(A) (B) (C) AS PER DSR
(D)

Land Acquisition
Statutary approvals
Design Brief
Proposal
Approvals
Site Preparation
Setting Out
Excavation 78.83 cu.m. 0.8Cu.m./D/2
Rubble Soling (Pinning) 14.87 sq.m. 0.20Sq.m./D/2
PCC (M10) 4.58 cu.m. 0.65Cu.m./D/4
RCC Footings
Shuttering
CBT of concrete
Pouring of concrete 25.38 cu.m. 0.60Cu.m./D/4
Curing of Concrete
De-Shuttering
RCC Columns till plinth
Shuttering
CBT of concrete
Pouring of concrete 1.56 cu.m. 0.60Cu.m./D/4
Curing of Concrete
De-Shuttering
Backfilling of pits 16.00 cu.m. 0.50Cu.m./3/D
RCC Ground Beams
Shuttering
CBT of concrete
Pouring of concrete 2.95 cu.m. 0.60Cu.m./4/D
Curing of Concrete
De-Shuttering
Brickwork in Substructure 7.35 cu.m. 1.25Cu.m./D/4
RCC Plinth Beams
Shuttering
CBT of concrete
Pouring of concrete 4.45 cu.m. 0.60Cu.m./4/D
Curing of Concrete
De-Shuttering
Filling in Plinth 27.20 0.50Cu.m./3/D
Soling in Plinth 16.47 0.50Cu.m./3/D
PCC (M10) and DPC 11.28 0.65Cu.m./D/4
RCC Columns (Upto first slab)
Shuttering
CBT of concrete
Pouring of concrete 4.26 0.60Cu.m./4/D
Curing of Concrete
De-Shuttering
RCC first floor slab with beams
Shuttering
CBT of concrete
Placing conduits
Pouring of concrete 4.35 0.60Cu.m./4/D
Curing of Concrete
De-Shuttering
Brickwork Masonary upto cill lev 19.87 1.25Cu.m./D/4
Placement of windows and door
frames 14
Brickwork Masonary upto lintle l 7.77 1.25Cu.m./D/4
Placement of Lintles
Shuttering
CBT of concrete
Pouring of concrete 1.24 0.60Cu.m./4/D
Curing of Concrete
De-Shuttering
Brick masonary upto beam level 5.52 1.25Cu.m./D/4
Water proofing 98.99
Internal Plastering 192.60 4Sq.m./D/4
External Plastering 172.02 3Sq.m./D/6
Electrification
Plumbing
Flooring 112.34 4Sq.m./D/3
Internal Painting 192.60 8Sq.m./D/3
External Painting 172.02 6Sq.m./D/4
Placing doors and windows
Snag-list
Handover
TOTAL
DURATION PRODUCTIVITY PERSONS PRODUCTIVITY FINAL
(DAYS) /DAY/PERSON (NO.) PER DAY (F) DURATION
(E) (F) (G) PER NO. OF (I)
PERSON (G) (H)

60
45
3
15
30
10
2
98.5375 0.4 16 6.4 12.3171875
74.35 0.1 14 1.4 10.621428571
7.0461538462 0.1625 10 1.625 2.8184615385

42.3 0.15 14 2.1 12.085714286

2.6 0.15 8 1.2 1.3

32 0.1666666667 15 2.5 6.4

4.9166666667 0.15 14 2.1 1.4047619048

5.88 0.3125 10 3.125 2.352

7.4166666667 0.15 12 1.8 2.4722222222

54.4 0.1666666667 15 2.5 10.88

0.1666666667 0.1666666667 15 2.5 6.588
18.8 0.1625 14 2.275 4.9582417582
 7.1 0.15 12 1.8 2.3666666667

7.25 0.15 20 3 1.45

24.456 0.3125 16 5 3.974

6.216 0.3125 12 3.75 2.072

2.0666666667 0.15 6 0.9 1.3777777778

4.416 0.3125 8 2.5 2.208

48.15 1 18 18 10.7
57.34 0.5 18 9 19.113333333

28.085 1.3333333333 18 24 4.6808333333

24.075 2.6666666667 18 48 4.0125
28.67 1.5 20 30 5.734
 FINAL
DURATION
ROUND
OFF

60
45
3
15
30
10
2
12
11
3

4
2
12
7
2

4
2
1
7
2
6

4
2
1
7
2
2

4
2
2
7
2
11
7
5
 4
2
2
7
4

7
4
1
1
7
4
4
3
2

4
2
1
7
2
2
2
11
19
7
14
5
4
6
4
5
5
452