Serck Audco Valves

Sealants
and
Injection
Equipment
The information contained within this catalogue may be subject to change without notice.

The product descriptions and part numbers quoted within this catalogue are not actively controlled
and may be subject to change without notice.

Should you discover an error or omissions, we would be grateful if you would advise our sales office
numbers listed in this catalogue to enable correction in future issues.

All items in this catalogue are subject to Flowserve Standard Terms and Conditions of Sales.
Sealants
Audco Sealants are high viscosity fluids, specially produced to seal and lubricate plug
valves. Only Audco sealants should be used in Audco valves unless authorised by SAV.
The use of a wrong sealant or commercial greases not recommended by us can impair
the good functioning of the Valve and in the worst case seize it completely.

Sealant is injected into the Super-H to ensure valve tight shut off and maintain
1 Sealant
low torque. Audco sealants have excellent lubricating properties and great
injection
film strength, they supplement Super LoMu treatment to reduce friction
2 Chamber
between the seating surfaces and provide a very effective seal even at higher Filled
line pressures. 3 Grooves
Filled
Sealants shall be selected based on service media and operating temperature,
4 A microfilm
the tables below summarise our general sealant recommendations. Sealant
spreads
shall be carefully selected since the use of the correct Audco Sealant will around the
minimize injection frequency. The tables are self-explanatory, however, if in plug
doubt on sealant selection, Serck Audco can suggest a suitable sealant against
service details.

Multi-Purpose Sealants
Serck Audco Valves research laboratories have paid great attention to the development of multi-purpose sealants to
simplify plant maintenance where many services are encountered. As a result of this research, we are able to offer
three sealants which cover a very wide variety of services and have replaced many of the older Audco sealants. A
single multi-purpose Audco sealant can often be used throughout an entire plant, often handling a variety of fluids.
This simplifies maintenance and reduces the number of sealants which need to be kept.

Temp Range °C ( °F)

Sealant Form Colour Recommended for Do not use on
Min Max

Most Hydrocarbons services,

Butane, propane, gasoline,
Strong alkali and
K Sticks kerosene, oils, fuel oils and most
high aromatic
733 Cartridges Cream -20 (-5) 250 (480) hydrocarbon solvents. Sweet and
and chlorinated
Bulk sour natural and manufactured gas
solvents.
with water organic condensates,
LPG systems, glycols.

Premium Multipurpose Sealant Neat petroleum

suitable for a range of fluids products.
K Sticks
including hydrocarbons, water, Strong mineral
735 Hard grade Black -40 (-40) 325 (620)
amines and methanol acids.
Bulk only
Suitable for high / low Chlorinated and
temperature applications. aromatic acids.
Strong acid
Most chemical plant services, solutions,
K Sticks -15 (0) 230 (450)
compressed air, water, aqueous hydrocarbons,
731 Cartridges Cream -20 (-5) 230 (450)
solutions, dilute acids, all alkaline chlorinated and
Bulk -25 (-13) 230 (450)
solutions tars and bitumens. aromatic
solvents.
Specialised Sealants
Even though our multipurpose sealants can cover most applications, we can still supply our range of specialised
sealants for those customers who need to utilize them.

Temp Range °C ( °F)

Sealant Form Colour Recommended for Do not use on
Min Max
Sweet and sour natural
K Sticks
and manufactured gas
Cartridges Light
985 -10 (12) 150 (300) with water/organic condensates. As 733.
Soft grade Brown
Preferred at elevated
Bulk only
temperatures
K Sticks
Domestic water services,
201 Cartridges White -7 (-20) 200 (390) As 731.
foodstuffs and pharmaceuticals.
Bulk
Nitrating acids, Hydrocarbon
K Sticks
sulphuric acid and other chlorinated and
147 Cartridges White -10 (14) 70 (160)
oxidising aromatic
Bulk
elements. solvents.
K Sticks
Water, high pressure, hot
734 Cartridges Cream 0 (32) 170 (340) As 731.
water and steam.
Bulk
K Sticks Petroleum based heat
591 Cartridges Cream 0 (32) 300 (570) transfer oils. Hot fuel As 733.
Bulk oil to 120°C.
Aromatic and
Hot hydrocarbon
chlorinated
gases and vapours including
K Sticks solvents.
high temperature
608 Cartridges Off White 0 (32) 340 (650) Liquid
cracking and reforming.
Bulk hydrocarbons
Strong acids and
and nitrating
alkalis to 150°C.
acids.
K Sticks As for 733, but particularly useful
-30 (-20) 150 (300)
733LT Cartridges Brown at lower temperatures and winter As for 733
-46 (-50) 100 (200)
Bulk conditions.
Cartridges
574 Soft grade Beige -50 (-58) 50 (120) Ammonia and brine As 731.
Bulk only
K Sticks As for 735, also oil and
Cartridges water mixtures where
2977 Black -40 (-40) 325 (620) As 735.
Soft grade water content is
Bulk only above 50% in the mixture
Sealant Injection Equipment
To ensure that sealant injection is a quick and easy operation, all Super-H pressure balanced plug valves are fitted
with a giant button head sealant injector, positioned as a side feed in the body. All injection equipment is fitted with
a flexible hose giving a hook-on connection to the sealant injector on the valve, enabling a safe set up for the
injection operation in just a few seconds. Note that sealant injection equipment is specialized high pressure
equipment and no other injection tools shall be used unless with our express recommendation

400-D Sealant Gun

Hand operated hydraulic gun, fitted with a pressure gauge. Suitable for small
number of valves or valves in remote locations, this gun is designed to take Size ‘K’
sealant sticks.
Effortless to operate, the 400D gives positive indication of when valve has been
fully charged.
The 400D replaces the now obsolete ALG4 gun. Cartridges for use with ALG4 gun
are still available

10-90 Pneumatic Pump

Trolley mounted, pneumatically operated large capacity injector pump. Suitable for
large numbers or sizes of valves, the pump is designed to take 5 Quarter sealant
cans. The pump will run when connected to an air supply that could be a
compressed air system or an air bottle.

Sealants Packaging
Sealant is packed in different forms to enable its use with the different available injection equipment.

Sealants Packaging K Sticks – Box of 12 Cartridges – Box of 12 5 Quarter Can

For Use on 400D Sealant Gun ALG4 Gun (superseded) 10-90 Pneumatic Pump
Stick Size (mm) 35∅ x 240 50∅ x 220 192∅ x 203
Box Size (mm) 150 x 180 x 280 165 x 205 x 245 n/a
Box Weight (Kg) 4 5.2 5

Weights will vary from those shown over a range of approximately 20-30% according to grade of sealant.
Sealant can also be purchased in bulk containers of 18Kg, 80Kg and 180 Kg

Audco Stem Packing Compound

Audco Stem Packing Compound is a special graphite-based material prepared in stick form for easily sealing the
stems of our Super ‘H’ valves. At any time, and even with the valve under full pressure, the stem packing can be re-
injected to restore original stem tightness.
Stem packing is not sealant and must under no circumstances be used in the valve sealant system. Also, valve
sealants are not suitable for sealing stems. Stem packing compound is supplied packed in boxes as follows:

Stick Size A B D
Suitable for valves in sizes ½” – 1” 1 ½” – 2” ≥3”
Number of Sticks per Container 40 24 24
Box Size (mm) 70∅ x 60 70∅ x 60 70∅ x 150
Box Weight (g) 100 100 330
Part Number LUSA0250 LUSA0048 LUSA0211

Audco Anti Seize Compound can be used to lubricate the stem packing stick and aid in the injection operation (see
page 8 for part numbers).
Sealants Part Numbers
Stick Size
Sealant Form Size Quantity Part Number
D x L (mm)
A 6x40 40/Box LUSA0158

A 6x40 90/Tin LUSA0144

B 10x40 24/Box LUSA0145

B 10x40 48/Tin LUSA0146

C 13x50 24/Box LUSA0147

C 13x50 40/Tin LUSA0148

D 16x65 24/Box LUSA0149

D 16x65 24/Tin LUSA0150

E 19x85 24/Box LUSA0151

Sticks
E 19x85 24/Tin LUSA0152

F 24x85 12/Box LUSA0153

F 24x85 12/Tin LUSA0159

G 29x100 6/Box LUSA0235

G 29x100 6/Tin LUSA0238

733
H 35x150 12/Box LUSA0154

H 35x150 1/Container LUSA0155

J 35x222 12/Box LUSA0246

K 35x240 12/Box LUSA0156

ALG 4 - 12/Box LUSA0176

Cartridge
ALG 4 - Single LUSA0273

5Q Soft Grade 0.5Kg/Can LUSA0206

Cans
5QT Soft Grade 3Kg/Can LUSA0019

5QT - 5Kg/Can LUSA0288

Drum Gaydon 180Kg/Drum LUSA0291

Drum Gaydon 180Kg/Drum LUSA0290

Drums
Drum Soft Grade 80Kg/Drum LUSA0298

Drum Stick Grade 80Kg/Drum LUSA0313

Pail Soft Grade 18Kg/ LUSA0317

 Stick Size
Sealant Form Size Quantity Part Number
D x L (mm)
A 6x40 40/Box LUSA0133

A 6x40 90/Tin LUSA0134

B 10x40 24/Box LUSA0135

B 10x40 48/Tin LUSA0136

C 13x50 24/Box LUSA0137

C 13x50 40/Tin LUSA0138

Sticks D 16x65 24/Box LUSA0139

D 16x65 24/Tin LUSA0140

E 19x85 24/Box LUSA0141

735 E 19x85 24/Tin LUSA0142

F 24x85 12/Box LUSA0191

G 29x100 6/Box LUSA0228

K 35x240 12/Box LUSA0403

ALG 4 - 12/Box LUSA0276

Cartridge
ALG 4 - 1/Cartridge LUSA0180

5QT Soft Grade 3Kg/Can LUSA0308

Cans
5QT - 5Kg/Can LUSA0397

Drum - 80Kg/Drum LUSA0467

Drums
Drum - 80Kg/Drum ON REQUEST
 Stick Size
Sealant Form Size Quantity Part Number
D x L (mm)
A 6x40 40/Box LUSA0133

A 6x40 90/Tin LUSA0134

B 10x40 24/Box LUSA0135

B 10x40 48/Tin LUSA0136

C 13x50 24/Box LUSA0137

C 13x50 40/Tin LUSA0138

D 16x65 24/Box LUSA0139

D 16x65 24/Tin LUSA0140

Sticks
E 19x85 24/Box LUSA0141

E 19x85 24/Tin LUSA0142

F 24x85 12/Box LUSA0157

F 24x85 12/Tin LUSA0181

731
G 29x100 6/Box LUSA0263

H 35x150 12/Box LUSA0143

H 35x150 1/Container LUSA0224

K 35x240 12/Box LUSA0179

Cartridge ALG 4 - 12/Box LUSA0178

5QT Soft Grade 3Kg/Can LUSA0293

Cans
5QT - 5Kg/Can LUSA0322

Drum Gaydon 180Kg/Drum LUSA0291

Drum Gaydon 180Kg/Drum LUSA0290

Drums
Drum Soft Grade 80Kg/Drum LUSA0298

Drum Stick Grade 80Kg/Drum LUSA0300

Pail - Soft Grade 18Kg/ LUSA0333

 Stick Size
Sealant Form Size Quantity Part Number
D x L (mm)
Stick K 35x240 12/Box LUSA0324

ALG 4 - 12/Box LUSA0346

Cartridge
985M ALG 4 - Single LUSA0303

Cans 5Q Soft Grade 5Kg/Can LUSA0302

Drum Drum Stick Grade 180Kg/Drum LUSA0296

Anti-Seize
Sealant Form Quantity Part Number

10g/Container LUSA0510

Anti-Seize Plastic Container 250g/Container LUSA0511

500g/Container LUSA0512
Sealant Illustrations
400-D Sealant Gun Anti Seize Compound

733 Sealant - K stick 735 Sealant - K Stick 733 Sealant – A Stick

731 Sealant - D Stick 733 Sealant - G Stick in Tin 731 Sealant – B Stick

Stem Compound - A Size Stem Compound - D size 985M 5QT 5Kg Can
SAV Sealant Selection Table
Due to varying service conditions, the recommendations in this chart are to used be as a general guide, only, in
selecting the correct sealant. The specific properties of the sealants suggested should be checked with the more
complete description given on the preceding pages, with particular regard to temperature and services.

Valve Application / Sealant Number

Service Sealant

Acetaldehyde 731 147

Acetate solvents 147
Acetic acids 731 147
Acetic anhydride 731 147
Acetone 147 731 735
Acetylene gas 733 731 147
Acids, general 147
Acrylic Acid 147
Acrylonitrile’s 147
Adipic Acid (15-25%) 731 147
Air 733 731 735
Air Dryers 735
Alcohols 147 731 735
Aldehydes 731
Aliphatic hydrocarbons 733
Alkalis 731
Alum 731 734
Aluminium chloride 731 147
Aluminium sulphate 731 734
Aluminium salt solutions 731
Amines 735
Ammonia, gas or liquid 731 734
Ammonium bicarbonate 731 734
Ammonium carbonate 731 734
Ammonium chloride 731 734
Ammonium nitrate (10%) 731 734
Ammonium sulphate 731 734
Ammonium hydroxide 731 734
Ammonium salt solutions 731
Aniline 733
Aniline dyes for Aqueous solvents 731
Animal Oils 733 731
Anodizing solutions 731
Anthracene oil 733 731
Aqua regia 147
Service Sealant

Aromatic hydrocarbons 733

Arsenic trichloride 731
Asphalt 731
Asphalt emulsions 731
Barium chloride 731 733 734
Barium hydroxide 731 734
Barium nitrate 731 734
Barium salt solutions 731
Barium sulphate 731
Beer 147
Beet sugar liquors (raw) 731 735
Benzene (benzol) 733
Benzine 733
Benzoic acid 731 147
Bitumen’s 731
Black liquor (paper lye cotton industry) 731
Blast furnace gas 733 731
Bleaching powder 731
Boiler water 734 735
Borax 731 733
Boric acid 731 147
BOV (Black or Brown oil of Vitriol) See sulphuric acid
Brine 731 735 147
Bromine (dry) 147
Bromine (wet) 147
Bulk stations 733 985M
Bunker oils (fuel oils) 733 985M
Butadiene 733 985M
Butane 733 985M
Butyl alcohol 147 734
Butyric acid 147 731
Calcium bisulphite 731 734
Calcium chloride 731 734
Calcium hydroxide 731 734
Calcium hypochlorite 147 731
Calcium salt solutions 731
Cane sugar liquors 735
Carbolic acid 731 733
Carbolic acid (phenol) 731 733
Carbolic acid (with water) 731 733
Carbon dioxide 731
Carbon monoxide 731 733 735
Castor oil 731 733
Caustic soda 731
Cellulose nitrate 731
Service Sealant

Cellusolve solvents 733

Chloric acid 147
Chloride of Lime 731
Chlorinated water (saturated) 731 734
Chlorine 731 147
Chlorine dioxide 147
Chloroacetic acid 147
Chrimic acid >50% 147 731
Chrome plating solutions 731
Chromic acid, diluted 731 147
Citric acid 731 147
Clay slips 731
Coal gas 731 733
Coal tar 733 985M
Coal tar distillation (products) 733
Coconut oil 735
Coke oven gas 731
Compressor discharge 350 °F & up 731
Compressor manifolds 733 731
Copper chloride 731 734
Copper nitrate 731 734
Copper plating solution 731
Copper salts 731
Copper sulphate 731 734
Corn oil 735
Corn syrup 735
Cottonseed oil 735
COV (Concentrated Oil of Vitriol) see sulphuric acid
Creosote 733
Cresol 733
Cresylic acid (cresol) 733
Crude oil 733 985M 735
Crude oil with High Water Content 735 985M
Curb cocks 731 985M 735
Cutting oils water emulsions 985M 735
Cyanide solutions 731 147
Cycloexanol 731
Cyclohexane 733
Detergents, synthetic 735
Dextrose 735
Diacetone alcohol 147 731
Dibuthyl phthalate 733
Dichlorethane 731
Diesel fuel 733 591
Service Sealant

Diethanolamine 731 735

Diethylamine 735
Diethylene glycol 731 734
Distillate mineral oil 733 985M
Drilling mud 985M 733
Dryer service 731 733
Electrolytic cell liquor 731 735
Epsom salts 731
Esters 731
Ethane 733 985M
Ethanolamines 735 731
Ether petroleum 733
Ethyl acetate 147
Ethyl Alcohol (Ethanol) 147 731
Ethyl chloride 731
Ethyl silicate 735
Ethylene 735
Ethylene chlorhydrin 731
Ethylene chloride-dichloride 731
Ethylene glycol 731 147
Ethylene oxide 147
Fatty acids 731 733
Feed Water Lines 731
Ferric chloride 731 734
Ferric nitrate 731 734
Ferric salts 731
Ferric sulphate 731 734
Ferrous salts 731
Ferrous sulphate 731 734
Filling stations 733
Fish oil 731 733
Fluorine for formaldehyde 731 147
Fluorosilic acid 147 731
Formaldehyde, 40% 147 731
Formic Acid 147 731
Fuel oil 733
Furfural 733 731 735
Gallic Acid 731 147
Gas distribution (Coal gas) 733 731
Gas dryers 735
Gas manufactured 733 985M 735
Gas natural 733 985M 735
Gas oil 733 735
Gases, fuel 733 735
Gasoline 733 735
Service Sealant

Gelatine 147
Glacial acetic acid 735
Glucose 735
Glues (natural) 731
Glycerine (glycerol) 731
Glycols 731 734
Green liquor 731
Green soap 731
Helium 735
Heptane 733 985M 735
Hexane 733 985M 735
Hot oil lines 733 735
Hot water 734 735
Hydrobromic acid 731 147
Hydrocarbon solvents 733 735
Hydrochloric acid 731 147
Hydrocyanic acid 731 147
Hydrofluoric acid 147
Hydrogen 731 733
Hydrogen chloride (dry) 731
Hydrogen chloride (wet) 731 147
Hydrogen peroxide 735 147
Hydrogen peroxide (100ppm max) 147
Hydrogen sulphide mixtures 731
Hydrogen sulphide pure 731
Hypochlorites 731 147
Hypochlorous acid 731 147
Iodine (wet) 147 731
Iron Salts 731
Isobutane 733 985M
Isobutylene liquid 733
Isobutylene vapour 733
Iso-octane 733
Jet fuel 733
Kerosene 733
Ketones 147
Lactic acid 731
Latex 731
Lead acetate 731 734
Lead arsenate, slurry 731
Lead nitrate, 50% 731 734
Lead salts 731
Light naphthas 733
Light oil, coal tar 733
Service Sealant

Lime 731 734

Linseed oil 731
Liquefied petroleum gas (LPG) 733 985M 735
Lithophone 731
Lithium bromide 731 734
Lithium chloride 731 734
Lubricating oil 733 591
Lye 731
Magnesium carbonate 731 734
Magnesium chloride 731 734
Magnesium hydroxide 731 734
Magnesium nitrate 731 734
Magnesium salts 735
Magnesium sulphate 731 734
Maleic acid (anhydride) 731 147
Malic acid 731 147
Manganese sulphate 735
Mash, distillery 735
Mercerising solutions 731
Mercuric chloride 731 147 735
Mercuric cyanide (5%) 731 734
Mercuric iodide 731 734
mercuric nitrate (5%) 731 734
Mercurous nitrate 731 734
Mercury 731 733
Meter set-ups 733 985M 735
Methane 733 985M 735
Methyl alcohol (Methanol) 147 731 735
Methyl ethyl ketone 147
Methylated spirits 147 731
Milk of lime 731
Mineral oil 733
Mineral spirits 733
Mixed acids 147
Mixed Phase Natural Gas / Crude oil / Water 735
Molasses 731 735
Monochloracetic acid 147
Mono-chlor-benzene 733 733
Monoethanolamine 731 735
Mud lines 733 985M 735
Naphtha 731 733
Naphthalene 733 735
Naphthenic acid 735
Natural gas 733 985M 735
Nickel chloride 731 734
Service Sealant

Nickel nitrate (5 10%) 731 734

Nickel plating solutions 731
Nickel sulphate 731 734
Nitration processes 147
Nitric Acid 731 147
Nitrogen 731 733
Nitrogen solutions 735
Nitro-paraffin’s 733
Nitrous Acid 731
Nonylphenol 733
Octane 733 985M 735
Oil essentials 733
Oil mineral 733 591
Oil of Vitriol see sulphuric acid
Oil petroleum 733 985M 735
Oil tar 735 591
Oil - vegetable and animal 731
Oil - water mixtures 733 985M 735
Oleic acid 731 733
Oleum 147
Olive oil 735
Organic Acids 731 733
Oxalic Acid 731 147
Palm oil 733 735
Palmitic acid 733
Paraffins 733
Peanut oil 735
Pentane 733
Petrol 733
Petrolatum 733 985M 735
Petroleum 733 985M 735
Petroleum ether 733 985M 735
Petroleum oil 733 985M 735
Phenol (carbolic acid) 731 733
Phosphorous trichloride, dry 147
Phosphates 731
Phosphoric acid 147 735
Phthalic acid (anhydride) 733
Phthalic anhydride (liquid) 731
Pickling acids 731
Pictric acid 731 147
Pitch 731
Polysibutylene 985M
Potassium bromide 731 734
Service Sealant

Potassium carbonate 731 734

Potassium chlorate 731 734
Potassium chloride 731 734
Potassium chromate 731 734
Potassium cyanide 731 734
Potassium dichromate 731 734
Potassium ferricyanide (25%) 731 734
Potassium hydroxide (10%) 734 731
Potassium hydroxide (50%) 734 731
Potassium nitrate 731 734
Potassium permanganate diluted 731 734
Potassium salts 735
Potassium silicate 731 734
Potassium sulphate 731 734
Produced Water 735 731
Producer gas 734
Propane 733
Propyl alcohol 147
Propylene liquid 733 985M 735
Propylene vapour 733 985M 735
Pulp 731
Pyridine 733 735
Pyrogallic acid 147 731
Quench oil 731
Residuum lines 731
Road tar 735 591
Roofing pitch 733 735
Rosin solution 731
ROV (Rectified Oil of Vitriol) see sulphuric acid
Rubber latex emulsions 731
Sal ammoniac 731
Salicylic acid 731 147
Salt solution 731
Saponification 731
Scouring liquors 731
Sea water 731 734 735
Separators - oilfield 733 985M 735
Sewage 731
Shellac 731
Silicone fluids 733
Silver bromide 731 734
Silver chloride 731 734
Silver nitrate 731 734
Slurries 731
Soap solutions 731 734
Service Sealant

Soda ash 731

Sodium 731
Sodium (molten) 735
Sodium acetate 731 734
Sodium aluminate 731 734
Sodium bicarbonate 731 734
Sodium bisulphite 731 734
Sodium borate, hot 731 734
Sodium bromide 731 734
Sodium carbonate 731 734
Sodium chloride 731 734
Sodium chromate 731 734
Sodium cyanide 731 734
Sodium dichromate 731 734
Sodium hydroxide 734 731
Sodium hypochlorite 731 147
Sodium metaphosphate 731 734
Sodium metasilicate 731 734
Sodium nitrate 731 734
Sodium nitrite 731 734
Sodium perborate 731 734
Sodium peroxide (10%) 731 734
Sodium phosphate, tribasic 731 734
Sodium salt solutions 731
Sodium silicate and distillate (water glass) 731 734
Sodium sulphate 731 734
Sodium sulphite 731 734
Sodium triosulphate 731 734
Solder molten 735
Soluble oil 735
Soy bean oil 735
Stannic chloride 731 734
stannous chloride 731 734
Starch solutions 731
Steam 735 734 608
Stearic acid 731 608
Stoddard solvent 733
Strontium salt solutions 731
Sugar solutions 731
Sulphate liquor 731
Sulphite liquor 731
Sulphonated oils 733
Sulphoric acids 731 147
Sulphur (molten) 735
Sulphur chloride 735
Sulphur dioxide 733 731 147
Service Sealant

Sulphur monochloride 735

Sulphur trioxide 733 731
Sulphur trioxide 733 147
Sulphuric acid above 40C 147
Sulphuric acid below 40C 147 733
Sulphuric acid with nitric acid 147
Sulphurous acid 731 147
Synthetic tannins 731
Tall oil (liquid rosin) 735
Tallow 735
Tannic acid 731 733
Tanning liquors 731
Tar 735 591
Tar acids 733
Tar distillation products 733
Tartaric acid 731 733
Tempering oil 733 985M
Toluene 733
Tricreasyl phosphate 731
Triethanolamine 147 735
Tri-sodium phosphate 731
Turpentine 733
Ucon fluids 735
Vacuum lines 735
Varnish 734 731 735
Vegetable oils 731 735
Vegetable tannins 731
Vinegar 731
Water 731 985M
Water distilled 147
Water fresh 731 734 985M
Water gas dry 731 733
Water gas wet 731 733
Water softening plants 731
Water, Injection 731 735
Water, Produced 735 731
Wax emulsions 731
Waxes 731
White liquor (paper industry) 731
White spirits 733
White water (paper industry) 731
Xylene (xylol) 733
Zinc Chloride 731 734
Zinc nitrate 731 734
Zinc salts 731
Zinc sulphate 731 734
Contact Us

Serck Audco Valves

Flowserve GB Ltd
Burrell Road
Haywards Heath
West Sussex
RH16 1TL
United Kingdom

Telephone: +44 (0) 1444 314560

Fax: +44 (0) 1444 314561

Email: savukinfo@flowserve.com

Web: www.flowserve.com