PXI Ultra High Density Matrix 40-535/536/537
• Ultra High Density Reed Relay Matrix Modules With
Up To 368 Crosspoints
• Single 92x4, Dual 44x4 & Single 44x8 Matrix
Configurations
• 1-Pole Switching
• Large Matrices Built Using Multiple Modules
• Uses High Reliability Pickering Ruthenium Reed
Relays For Maximum Performance
• Fast Operating Speed <1000µs
• Switch up to 150 Volts with 10W Max Power
• Max Switch Current 0.5A
• VISA, IVI & Kernel Drivers Supplied for Windows
• Supported by PXI or LXI Chassis
Larger matrices may be constructed by daisy chaining the
• Supported by eBIRST ™ common signals from multiple modules. For example, 7 off 40-535
modules will form a 644x4 Matrix, a total of 2576 crosspoints in
• 3 Year Warranty
an 8-slot PXI Chassis. An 18-slot chassis gives a capacity of 6256
crosspoints.
The 40-535/536/537 are ultra high density PXI switching matrices
constructed with reed relays. The range is as follows: Supported by eBIRST
• 40-535-021 Single 92x4 matrix, 1-pole eBIRST switching system test tools simplify switching system fault-
• 40-536-021 Dual 44x4 matrix, 1-pole finding by quickly testing the system and graphically identifying the
faulty relay.
• 40-537-021 Single 44x8 matrix, 1-pole
Typical applications include signal routing in Functional ATE and For more information go to: pickeringtest.com/ebirst
data acquisition systems. These matrix modules are constructed
using high reliability sputtered ruthenium reed relays, offering 109
X101
X102
X103
X104
X105
X106
X107
X108
X109
X110
X111
X142
X143
X144
operations to give maximum switching confidence with long life and
stable contact resistance.
Y101
Y102
X10
X11
X42
X43
X44
Y103
X1
X2
X3
X4
X5
X6
X7
X8
X9
T
PO IX
IN
SS R
O AT
Y104
CR M
Y1
X201
X202
X203
X204
X205
X206
X207
X208
X209
X210
X211
X242
X243
X244
Y2
Y3
T
PO IX
IN
SS R
O AT
Y4
CR M
Y5 Y201
Y6 Y202
Y7 Y203
Y8 Y204
40-537 44x8 Ultra High Density Matrix 40-536 Dual 44x4 Ultra High Density Matrix
X10
X11
X12
X13
X14
X15
X16
X17
X18
X19
X90
X91
X92
X20
X21
X22
X23
X24
X25
X26
X27
X28
X29
X30
X1
X2
X3
X4
X5
X6
X7
X8
X9
ISSUE 9.0 MAY 2018
Y1
Y2
Y3
T
PO IX
IN
SS R
O AT
Y4
CR M
40-535 92x4 Ultra High Density Matrix
pickeringtest.com
Specifications Ultra High Density Matrix – 40-535/536/537
Relay Type Mechanical Characteristics
The 40-535/536/537 modules are fitted with ruthenium sputtered Single slot 3U PXI (CompactPCI card).
reed relays, these offer very long life with good low level switching Module weight: 380g (40-536-021).
performance and excellent contact resistance stability. Spare reed 3D models for all versions in a variety of popular file formats are
telays are built onto the circuit board to allow easy maintenance available on request.
with minimum downtime.
Connectors
All reed relays are manufactured by our sister company Pickering
PXI bus via 32-bit P1/J1 backplane connector.
Electronics: pickeringrelay.com
Signals via front panel 96-pin male micro-D connector, for pin outs
Switching Specification please refer to the operating manual.
Switch Type: Ruthenium Reed Operating/Storage Conditions
Max Switch Voltage: 150VDC/100VAC* Operating Conditions
Max Power: 10W Operating Temperature: 0°C to +55°C
Max Switch Current: 0.5A Humidity: Up to 90% non-condensing
Altitude: 5000m
Max Carry Current: 0.5A
Storage and Transport Conditions
Initial Path Resistance
Storage Temperature: -20°C to +75°C
On (Single Module): <1000mΩ Humidity: Up to 90% non-condensing
Off (Single Module): >109Ω Altitude: 15000m
Thermal Offset: <5µV
PXI & CompactPCI Compliance
Operate Time: <1ms, 0.5ms typical
The module is compliant with the PXI Specification 2.2. Local Bus,
Release Time: <1ms, 0.5ms typical Trigger Bus and Star Trigger are not implemented.
Expected Life Uses a 33MHz 32-bit backplane interface.
Low power load: 1x109 operations
Full power load: >5x106 operations Safety & CE Compliance
* For full voltage rating, signal sources to be switched must be fully All modules are fully CE compliant and meet applicable EU
isolated from mains supply and safety earth. directives: Low-voltage safety EN61010-1:2010, EMC Immunity
EN61326-1:2013, Emissions EN55011:2009+A1:2010.
Power Requirements
+3.3V +5V +12V -12V
0 800mA (typ 280mA) 0 0
Internal Construction of the 92x4 Ultra High Density Matrix Module
pickeringtest.com
Ordering Information Ultra High Density Matrix – 40-535/536/537
Product Order Codes Support Products
Single 92x4 Matrix Module, 1 Pole 40-535-021 eBIRST Switching System Test Tool
Dual 44x4 Matrix Module, 1 Pole 40-536-021 This product is supported by the eBIRST test tools which simplify
the identification of failed relays, the required eBIRST tools are
Single 44x8 Matrix Module, 1 Pole 40-537-021
below. For more information go to: pickeringtest.com/ebirst
Product Customization Product Test Tool Adaptor Termination
Pickering PXI modules are designed and manufactured on our own All Types 93-002-001 93-002-226 93-016-103
flexible manufacturing lines, giving complete product control and
Spare Relay Kits
enabling simple customization to meet very specific requirements.
Kits of replacement relays are available for the majority of
Customization can include:
Pickering’s PXI switching products, simplifying servicing and
• Alternative reed relay types reducing down-time.
• Mixture of reed relay types
Product Relay Kit
• Alternative number of relays
• Different performance specifications 40-535-021 91-100-006
All customized products are given a unique part number, fully 40-536-021 91-100-006
documented and may be ordered at any time in the future. Please 40-537-021 91-537-009
contact your local sales office to discuss. For further assistance, please contact your local Pickering sales
office.
Mating Connectors & Cabling
For connection accessories for the 40-535/536/537 modules
please refer to the 90-016D 96-pin micro-D Connector
Accessories data sheet where a complete list and documentation
can be found for accessories, or refer to the Connection Solutions
catalog.
pickeringtest.com
Supporting Products & Software Ultra High Density Matrix – 40-535/536/537
Chassis Compatibility
This PXI module must be used in a suitable chassis. It is compatible with the following chassis types:
• All chassis conforming to the 3U PXI and 3U Compact PCI (cPCI) specification
• Legacy and Hybrid Peripheral slots in a 3U PXI Express (PXIe) chassis
• Pickering Interfaces LXI or LXI/USB Modular Chassis
Chassis Selection Guide
Standard PXI or hybrid PXIe Chassis from any Vendor:
• Mix our 1000+ PXI switching & simulation modules with any
vendor’s PXI instrumentation
• Embedded or remote Windows PC control
• Real-time Operating System Support
• High data bandwidths, especially with PXI Express
• Integrated module timing and synchronization
Pickering LXI or LXI/USB Modular Chassis—only accept
our 1000+ PXI Switching & Simulation Modules:
• Ethernet or USB control enables remote operation
• Low-cost control from practically any controller
• LXI provides manual control via Web browsers
• Driverless software support
• Power sequencing immunity
• Ethernet provides chassis/controller voltage isolation
• Independence from Windows operating system
Connectivity Solutions
We provide a full range of supporting cable and connector solutions for all our switching products—20 connector families with 1200+
products. We offer everything from simple mating connectors to complex cables assemblies and terminal blocks. All assemblies are
manufactured by Pickering and are guaranteed to mechanically and electrically mate to our modules.
Connectors & Backshells Multiway Cable Assemblies RF Cable Assemblies Connector Blocks
We also offer customized cabling and have a free online Cable Design Tool that can
be used to create custom cable solutions for many applications.
Visit: pickeringtest.com/cdt to start your design.
Mass Interconnect
We recommend the use of a mass interconnect solution when an Interchangeable
Test Adapter (ITA) is required for a PXI or LXI based test system. Our modules are
fully supported by both Virginia Panel and MacPanel.
Pickering Reed Relays
We are the only switch provider with in-house reed relay manufacturing capability
via our sister company, Pickering Electronics. These instrument grade reed relays
feature SoftCenter® technology, ensuring long service life and repeatable contact
performance
To learn more, please go to: pickeringrelay.com
pickeringtest.com
Supporting Products & Software Ultra High Density Matrix – 40-535/536/537
Programming
Pickering provide kernel, IVI and VISA (NI & Keysight) drivers which are compatible with all Microsoft supported versions of Windows and
popular older versions. For a list of all supporting operating systems, please see: pickeringtest.com/os
The VISA driver is also compatible with Real-Time Operating Systems such as LabVIEW RT. For other RTOS support contact Pickering.
These drivers may be used with a variety of programming environments and applications including:
• Pickering Interfaces Switch Path Manager
• National Instruments products (LabVIEW, LabWindows/CVI, Switch Executive, MAX, TestStand, VeriStand, etc.)
• Microsoft Visual Studio products (Visual Basic, Visual C+)
• Keysight VEE
• Mathworks Matlab
• Marvin ATEasy
• MTQ Testsolutions Tecap Test & Measurement Suite
Drivers for popular Linux distributions are available, other environments are also supported, please contact Pickering with specific enquiries.
We provide Soft Front Panels (SFPs) for our products for familiarity and manual control, as well as comprehensive documentation and
example programs to help you develop test routines with ease.
To learn more about software drivers and development environments, please go to: pickeringtest.com/software
Signal Routing Software
Our signal routing software, Switch Path Manager, automatically selects and energizes switch
paths through Pickering switching systems. Signal routing is performed by simply defining
test system endpoints to be connected together, greatly accelerating Test System software
development.
To learn more, please go to: pickeringtest.com/spm
Diagnostic Relay Test Tools
eBIRST Switching System Test Tools are designed specifically for our PXI, PCI or LXI
products, these tools simplify switching system fault-finding by quickly testing the system
and graphically identifying the faulty relay.
To learn more, please go to: pickeringtest.com/ebirst
Pickering Interfaces maintains a commitment to continuous product development, consequently we reserve the right to vary from the description given in this data sheet.
Three Year Warranty & Guaranteed Long-Term Support
All standard products manufactured by Pickering Interfaces are warranted against
defective materials and workmanship for a period of three years from the date of delivery
to the original purchaser. Extended warranty and service agreements are available for all our modules and systems with various levels to
suit your requirements. Although we offer a 3-year warranty as standard, we also include guaranteed long-term support—with a history of
supporting our products for typically 15-20 years. To learn more, please go to: pickeringtest.com/support
Available Product Resources
We have a large library of product resources including success stories, product and support videos, articles, as well as complete product
catalogs and product reference maps to assist when looking for the switching, simulation and cable and connector solutions you need.
We have also published handy reference books for the PXI and LXI standards. © Copyright (2018) Pickering Interfaces. All Rights Reserved
To view, download or request any of our product resources, please visit: pickeringtest.com/resources
pickeringtest.com
