1
CSS CoC3
Computer
System Servicing
1
2
CSS NC2 Step:
Format first your Server Computer System Unit using Server 2008 Standard
And your Client 1 Computer System Unit using Windows7 Ultimate
Create 2 partition
ex: Drive C: for your O.S
Drive D: for your BackUp Files
Prepare and arrange your cabling Straight through wire (note: Memorize & Follow
the CSS Block Diagram )
Focus to CLIENT:
First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
Click WINDOWS FIREWALL > then Click TURN WINDOWS FIREWALL ON OR OFF
> make it sure your HOME/ PRIVATE NETWORK CONNECTION is TURN ON and
> PUBLIC NETWORK CONNECTION is TURN ON.
> And click BACK button
Then click ALLOW PROGRAMS OR FEATURE THROUGH WINDOWS FIREWALL
Check the following box: 1. File and Printer Sharing
2. Network Discovery
3. Remote Desktop
4. Windows Firewall Remote Management
5. Windows Remote Management
ROUTER CONFIGURATION using CLIENT SystemUnit:
First RESET your ROUTER in 10 Sec. observed the light when blink.
After you reset the ROUTER Turn OFF and ON the power button
Then click START MENU > RUN > type CMD
Type ipconfig > then it will appear the DEFAULT GATEWAY of your ROUTER >
Then open your Browser (ex: Google, IE) > then type in ADDRESS BAR the
DefaultGateway of your ROUTER > then type USERNAME & PASSWORD (you will
see below in your ROUTER Devices ) > then click OK.
DISABLE the WIFI of your ROUTER DEVICES > click Save > then Reboot to change
from Network/ Local Connection type your given DEFAULT GATEWAY in IP Address
(ex: Default of Router ip: 192.168.0.1 > change the IP ADDRESS of your Default
Gateway ex: 192.168.10.10 )
Note: Make it sure the default gateway is not the same and used by other
Devices, To avoid error internet connection.
2
3
ACCESS POINT CONFIGURATION using CLIENT SystemUnit:
Direct first your Straight Though cable from A.P to CLIENT to configured
then RESET your A.P in 10 Sec. observed the light when blink.
After you reset the A.P Turn OFF and ON the power button
Then click START MENU > RUN > type CMD
Type ipconfig > then it will appear the DEFAULT GATEWAY of you’re A.P >
Then open your Browser (ex: Google, IE) > then type in ADDRESS BAR the
DefaultGateway of you’re A.P > then type USERNAME & PASSWORD (you will see
below in you’re A.P Devices ) > then click OK.
ENABLE the WIFI of you’re A.P DEVICES > Label you’re Wifi A.P Devices (ex:APWifi1)>
Type password(ex: Admin12@)> click Save > then Reboot to change
from Network/ Local Connection type your given DEFAULT GATEWAY in IP Address
(ex: Default of A.P ip: 192.168.0.254 > change and copy the IP ADDRESS of
your Default Gateway ROUTER into A.P ex: 192.168.10.10 )
then TURN OFF or DISABLE the DHCP > click Save > then Reboot to change
Note: Make it sure the default gateway of you’re A.P is the same to the
ROUTER, ENABLE your Wifi, and DISABLE the DHCP of you’re A.P.
Remove and Back your Straight Though cable from A.P to HUB.
Focus to SERVER:
First Right click on your COMPUTER > then PROPERTIES > click CHANGE
SETTINGS > then click CHANGE Button > from computer name type: SERVER1
>Click ok > then close to Reboot/Restart your Server.
Login first (Username: Administrator)(Password: Admin12@)
First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
Click WINDOWS FIREWALL > then Click TURN WINDOWS FIREWALL ON OR OFF
> make it sure your HOME/ PRIVATE NETWORK CONNECTION is TURN ON and
> PUBLIC NETWORK CONNECTION is TURN ON.
> And click BACK button
Then click ALLOW PROGRAMS OR FEATURE THROUGH WINDOWS FIREWALL
Check the following box: 1. File and Printer Sharing
2. Network Discovery
3. Remote Desktop
4. Windows Firewall Remote Management
5. Windows Remote Management
3
4
CREATING STATIC I.P Address of SERVER:
First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
Then Click CHANGE ADAPTER SETTINGS > from LOCAL AREA CONNECTION Right
Click > then PROPERTIES > uncheck the BOX (TCP/IPv6) > then click (TCP/IPv4)
> then Click PROPERTIES Button.
choose Use the Following IP address type ip(ex: I.P ADRESS: 192.168.10.5)
automatically will appear when you click (SUBNET MASK:255.255.255.0)
you will type the I.P of your ROUTER (DEFAULTGATEWAY:192.168.10.10)
from Use the following DNS server addresses type the ip of your SERVER in (ex:
PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
Once you change or type the I.P Address > Right Click DISABLE & ENABLE.
Open your CMD > then type ipconfig > you will see the I.P address you created
was saved.
Ping your Server connection In CMD > type > ping I.P of Server (ex:
ping 192.168.10.10) note: make it sure the RESULT will be 0% lost- means your
connection is good
Peer to Peer SERVER to CLIENT
After that Try to ping your CLIENT using your SERVER connection In CMD >
type > ping I.P of Client (ex: ping 192.168.10.15) note make it sure the RESULT
will be 0% lost- means your connection is good from CLIENT
Focus to CLIENT:
Ping your Client connection In CMD > type > ping I.P of Client (ex:
ping 192.168.10.15) note make it sure the RESULT will be 0% lost- means your
connection is good
Peer to Peer CLIENT to SERVER
After that Try to ping your SERVER using your CLIENT connection In CMD >
type > ping I.P of Server (ex: ping 192.168.10.5) note make it sure the RESULT
will be 0% lost- means your connection is good from SERVER.
4
5
Focus to SERVER:
Starting Creating ROLES in SERVER MANAGER
1st role & 2ND role
Open SERVER MANAGER > Click ROLES > then click ADD ROLES
Check the box [√] ACTIVE DIRECTORY DOMAIN SERVICES
Click NEXT > NEXT > then click INSTALL > then FINISH (note: don’t close
button).
Click start > RUN > then type dcpromo > click Next > Next > then choose the
Second Radio Button [*] Create domain a new forest.
Then click NEXT button > Create your own DOMAIN (ex: Paul.com)
Choose WINDOWS 2000 > NEXT > choose WINDOWS 2000 NATIVE.
Make it sure the box of DNS server is check [√] >NEXT > YES > click NEXT >
then Create PASSWORD: Admin12@ > then NEXT > NEXT > Finish > the
Computer will RESTART NOW> then Login when CSU resume to open.
3rd role
Open SERVER MANAGER > Click ROLES > then click ADD ROLES
Check the box [√] DHCP
Click NEXT > NEXT > Click VALIDATE Button and will appear the CHECK
VALID icon. > then NEXT > click NEXT again > then Click ADD button type the
Following Ex: Scope name: Scope_1
Starting IP: 192.168.10.20
Ending IP: 192.168.10.30
SubnetMask: 255.255.255.0
DefaultGateway: 192.168.10.10
OK >Click NEXT > then choose DISABLE the IPv6 the second RadioBox >
Next > Next again > Click then INSTALL > Close
Right click on your internet icon and click OPEN NETWORK AND SHARING CENTER.
Then Click MANAGE NETWORK CONNECTIONS > from LOCAL AREA CONNECTION
Right Click > then PROPERTIES > then click (TCP/IPv4) > then Click PROPERTIES
Button.
from Use the following DNS server addresses change the ip of your SERVER from
127.0.0.1 into (ex: PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
Once you change or type the I.P Address > Right Click DISABLE & ENABLE.
4th role
5
6
Open SERVER MANAGER > Click ROLES >from Right Side click FILE
SERVICES with >click FILTER EVENTS > uncheck the BOX [] ERROR
[] WARNING
Click OK > Scroll Down > click ADD ROLE SERVICES > Check th BOX
[√] FILE SERVER RESOURCE MANAGER > Next > then select/ check the BOX
[√] Local Disk (C:) > click Next > Next again > Install > then CLOSE button.
5th role
Open SERVER MANAGER > Click ROLES > then click ADD ROLES
Check the BOX[√] Print Services > NEXT button > check the box [√] Print Server >
Next > Install > then CLOSE button > CLOSE ALL WINDOWS.
6
7
Still Focus to SERVER: for DNS
Open SERVER MANAGER > Click Positive sign of [+]ROLES
Click Positive sign of [+]DNS SERVER > Click Positive sign of [+]DNS >
Click Positive sign the Computer name of your Server ex: [+]SERVER1 >
Click Positive sign of [+]FORWARD LOOKUP ZONES >
> Click the name of your Domain ex: Paul.com > from Right Side > Right Click
the name of your Server ex: server1 > then PROPERTIES> check the BOX
[√] Update Associated Pointer (PTR) record > then click OK
Click REVERSE LOOKUP ZONES > then Right Click > NewZone > Click
NEXT button > NEXT > NEXT > type IP ADDRESS from Network ID:
192.168.10. >
Click NEXT > NEXT > then Click FINISH
Click below from ReverseLookUpZones IP ADD. You created > then RightClick >
Select New Pointer (PTR) > then type the last digit IP ADDRESS of your
SERVER from ex: HOST IP ADDRESS: 192.168.10.5 >
Click the BROWSE Button > Click the computer name of your Server ex:SERVER1
Click arrow down and choose From Record Types: ALL RECORDS >
Then go back to Double Click the Comp. name of server SERVER1 > Double Click
the FORWARD LOOK UP ZONES > Double Click the name of your Domian
ex: Paul.com > Select the (Same As Parent Folder) > then Click OK > OK
Repeat again go to REVERSE LOOKUP ZONES > then Right Click > NewZone
> Click NEXT button > NEXT > NEXT > type IP ADDRESS from Network ID:
127.0.0. >
Click NEXT > NEXT > then Click FINISH
Click below from ReverseLookUpZones IP ADD. You created > then RightClick >
Select New Pointer (PTR) > then type the last digit IP ADDRESS ex: HOST IP
ADDRESS: 127.0.0.1 >
Click the BROWSE Button > Click the computer name of your Server ex:SERVER1
Click arrow down and choose From Record Types: ALL RECORDS >
Then go back to Double Click the Comp. name of server SERVER1 > Double Click
the FORWARD LOOK UP ZONES > Double Click the name of your Domian
ex: Paul.com > Select the (Same As Parent Folder) > then Click OK > OK
7
8
Still Focus to SERVER: Creating 2 Organizational Unit and 4 User Accounts
START MENU > ADMINISTRATIVE TOOLS > Click the ACTIVE
DIRECTORY USERS and COMPUTERS > on yourDomain Name
ex: Paul.com Right click> then NEW >select ORGANIZATIONAL UNIT > TYPE
name: AdminDepartment > then Uncheck the box > click OK
Click the USERS folder icon > from Right Side > Right Click to Administrator
then > Copy > type a 1st USER ACCOUNT- Firstname: a1 > Next
Check the 3rd BOX[√] Password Never Expires Type the
PASSWORD: Admin12@ & CONFIRM PASSWORD: Admin12@
Click the USERS folder icon > from Right Side > Right Click to Administrator
then > Copy > type a 2nd USER ACCOUNT- Firstname: b1> Next
Check the 3rd BOX[√] Password Never Expires Type the
PASSWORD: Admin12@ & CONFIRM PASSWORD: Admin12@
Select the a1 and b1 > then Drag to first O.U that you created a
AdminDepartment > click YES Button.
From your Domain Name ex: Paul.com Right click> > then NEW >select
ORGANIZATIONAL UNIT > TYPE 2nd O.U. name: ItDepartment > then Uncheck
the box > click OK
Click the USERS folder icon > from Right Side > Right Click to Administrator
then > Copy > type a 3rd USER ACCOUNT- Firstname: c1 > Next
Check the 3rd BOX[√] Password Never Expires Type the
PASSWORD: Admin12@ & CONFIRM PASSWORD: Admin12@
Click the USERS folder icon > from Right Side > Right Click to Administrator
then > Copy > type a 4th USER ACCOUNT- Firstname: d1> Next
Check the 3rd BOX[√] Password Never Expires Type the
PASSWORD: Admin12@ & CONFIRM PASSWORD: Admin12@
Select the c1 and d1 > then Drag to Second O.U that you created a ItDepartment
> click YES Button. CLOSE WINDOWS.
8
9
Still Focus to SERVER:CREATING REDIRECTION FOLDER in DRIVE C:
Start Menu> Click COMPUTER > go to/ open Local Disk(C:)
Right Click > New > FOLDER > then Type the folder name REDIRECTION
From REDIRECTION > Right Click > then Click PROPERTIES > select SHARING
tab > Click ADVANCED SHARING BUTTON > Check the BOX
[√]SHARE THIS FOLDER > then Click PERMISSIONS Button > Click Everyone
> then click REMOVE button to remove the Everyone >
Click ADD Button > then Type au > then Click CHECK NAME Button > Click OK >
Select Authenticated Users then check all BOX [√]ALLOW > Apply > OK > then
Apply > then OK
Go to SECURITY tab > then click EDIT > Click ADD Button > type au > click
CHECK NAME Button > Click OK >
Select Authenticated Users then check all BOX [√]ALLOW >Apply > OK >
Back to SHARING tab> copy the NETWORK PATH ex: \\Server1\redirection >
Then click CLOSE Button
9
10
Still Focus to SERVER: for GROUP POLICY MANAGEMENT
Click START MENU > ADMINISTRATIVE TOOLS > Click GROUP POLICY
MANAGEMENT.
Click Positive sign of Forest ex: [+]FOREST:Paul.com
Click Positive sign of Domains ex: [+]DOMAINS
Click Positive sign of Name of your Domain ex: [+]Paul.com
Select the first O.U that you created ex: [+]AdminDepartment > RightClick >
select CREATE A GPO IN THIS DOMAIN, AND LINK IT HERE… > then
type New Group Policy Object 1 > then Click OK button
Will appear the GPO you created below of AdminDepartment >
Right click in New Group Policy Object 1> then Click ENFORCED to check >
Then click the New Group Policy Object 1> and from Right Side Select
DELEGATION tab > Select Authenticated Users > then click ADVANCED
Button > Select Authenticated Users again > then check all BOX [√]ALLOW>
Click Apply button > OK
Right click again in New Group Policy Object 1> then Click EDIT >
Click the Positive Sign of User Configuration ex: [+]USER CONFIGURATION
Click the Positive Sign of Policies ex: [+]POLICIES
Click the Positive Sign of Windows Settings ex: [+]WINDOWS SETTINGS
Click the Positive Sign of Folder Redirection ex: [+]FOLDER REDIRECTION
Right Click in DESKTOP > PROPERTIES
From TARGET tab > click arrow down of Setting: not configured
Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\redirection
Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK
From FOLDER REDIRECTION again > Right Click in DOCUMENT >
PROPERTIES
From TARGET tab > click arrow down of Setting: not configured
Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\redirection
Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK, then CLOSE WINDOWS
10
11
Note: after creating 1st GPO you will create again another 2nd GPO, the procedure are
the same only from first GPO, follow the STEP again.
Select the second O.U that you created ex: [+]ItDepartment > RightClick > select
CREATE A GPO IN THIS DOMAIN, AND LINK IT HERE… > then type
New Group Policy Object 2 > then Click OK button
Will appear the GPO you created below of ItDepartment >
Right click in New Group Policy Object 2> then Click ENFORCED to check >
Then click the New Group Policy Object 2> and from Right Side Select
DELEGATION tab > Select Authenticated Users > then click ADVANCED
Button > Select Authenticated Users again > then check all BOX [√]ALLOW>
Click Apply button > OK
Right click again in New Group Policy Object 2> then Click EDIT >
Click the Positive Sign of User Configuration ex: [+]USER CONFIGURATION
Click the Positive Sign of Policies ex: [+]POLICIES
Click the Positive Sign of Windows Settings ex: [+]WINDOWS SETTINGS
Click the Positive Sign of Folder Redirection ex: [+]FOLDER REDIRECTION
Right Click in DESKTOP > PROPERTIES
From TARGET tab > click arrow down of Setting: not configured
Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\redirection
Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK
From FOLDER REDIRECTION again > Right Click in DOCUMENT >
PROPERTIES
From TARGET tab > click arrow down of Setting: not configured
Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\redirection
Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK, then CLOSE WINDOWS
11
12
Still Focus to SERVER: for FEATURES Windows Back-Up
Open SERVER MANAGER > Click FEATURES > Click ADD FEATURES >
Select the BOX [◘]Windows Server Backup Features > click NEXT >
Install > then Click CLOSE Button
Then Close all windows
Focus to CLIENT: Joining a DOMAIN
First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
Then Click CHANGE ADAPTER SETTINGS > from LOCAL AREA CONNECTION Right
Click > then PROPERTIES > then click (TCP/IPv4) > then Click PROPERTIES
Button.
choose Use the following DNS server addresses type the ip of your SERVER
in (ex: PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
After you type the IP ADD. Right Click Local Area connection DISABLE then ENABLE
| Note: you must need to do that to Refresh the I.P ADDRESS of CLIENT
Click START MENU > Right Click from COMPUTER > then Properties
Click CHANGE SETTINGS > Click CHANGE Button > Choose and Select
DOMAIN > then type the name of your domain ex: DOMAIN: Paul.com >
Click OK > then Type the Username & Password > click OK > the computer
will request to RESTART > Click Close button then RESTART NOW > the
computer will resume to open.
Focus to CLIENT: Login a USER ACCOUNT & FILE SHARING
Click Start Menu > then Click SWITCH USER > click Other Account
Type the USERNAME and PASSWORD that you Created in server ex:
Username: a1 || Password: Admin12@
On DESKTOP > Right Click Create NEW FOLDER > then Rename FILE
SHARING A1 > Inside of FILE SHARING A1 Folder > Right Click Create Text
Document then type your information ex:
Full Name, Age, Birthday, Birth Place, and type CSS NC2.
Note: Using Computer of SERVER you can see now the File Sharing Folder that you
created from CLIENT.
Focus to SERVER: STORAGE for BACK UP and RESTORE
12
13
“BackUp”
Click Server Manager > click Positive sign of Storage ex: [+]Storage >
Click WINDOWS SERVER BACKUP > Click in right side the BACKUP ONCE >
Click Next > Select the first Radio Button [•]FULL SERVER (Recommended) > NEXT
Select the first Radio Button [•]LOCAL DRIVES > NEXT > Click YES >
Select the first Radio Button [•]VSS COPY BACKUP (RECOMMENDED)> NEXT > then
Click BACKUP button> wait until to finish Bakcup 100% > click CLOSE button.
“Restored”
Click Server Manager > click Positive sign of Storage ex: [+]Storage >
Click WINDOWS SERVER BACKUP > Click in right side the RECOVERY >
Select first Radio Button ex: [•]THIS SERVER (SERVER1) Click NEXT > NEXT > NEXT
> Click Positive sign of SERVER computer name ex: [+]Server1 >
Then Select LOCAL DISK (C:) to Back Up all > NEXT > OK > Click BROWSE
Button > Click Positive sign of Coputer ex: [+]COMPUTER > then Choose
LOCAL DISK (D:) for Restoring Files Destination > Click OK > NEXT> RECOVER
> Click CLOSE Button > Close Wndows
Note: after back up & Restoring a FILES you can see to DRIVE (D:)
Focus to SERVER: INSTALLING PRINTER SHARING
First connect your Printer to Server> then install drivers of Printer >
Go to ADMINISTRATIVE TOOLS > Click PRINT MANAGEMENT >
Click positive sign of [+]PRINT SERVERS > Click positive sign of computer name
[+]SERVER1(Local) > Click PRINTERS > Right Click on brand name of PRINTER >
Click MANAGE SHARING > then Check the BOX [√]SHARE THIS PRINTER > Click
APPLY > then OK Button
Focus to CLIENT: PRINTER SHARING
First Click START MENU > Click COMPTER > From LEFT SIDE Click NETWORK >
Then open the Compter name of your SERVER > Right Click on the Brand of Printer
Device ex: EPSON L360 Series > then Click CONNECT
And now you can try to TEST the PRINTER SHARING using your CLIENT
For REMOTE DESKTOP CONNECTIONS:
13
14
This step are same procedure both SERVER or CLIENT Computer System Unit
Click Start Menu > Right Click from COMPUTER >
Then PROPERTIES > Click CHANGE SETTINGS then>
Click REMOTE Tab> Choose the radio button in Second Box
[ ] Don’t ……
[• ] Allow Connections from Computers running any version of Remote
Desktop (less secure)
[ ] Allow …….
Click OK > then Click APPLY Button > OK Button >
Click Start Menu> Search REMOTE DESKTOP CONNETIONS >
From COMPUTER:_______ type the I.P ADDRESS that you want to REMOTE to
Control the Computer > then Connect > Enter USERNAME & PASSWORD >
Click Yes > then OK.
Note: After All Don’t forget Back to WORKGROUP your CLIENT.
Proper Shutdowns of your Computer System Unit. And
Keep leave clean your Work Station Area
14
