Bonton Technomake Pvt. Ltd.

7-A, Sc No 71, Near Chandan Nagar Police Station

Dhar Road, INDORE-452 002 ( M. P.)
Tel:0731-23 83 157 / 23 88 769
E-mail:info@bontonfurniture.net
website:www.bontonfurniture.net
ECC No. : AABCB4237AXM00I
GST No. 23AABCB4237A1ZH
CST No. : 0112/XIV/1221/C Dt. 11/12/97

Prices i.e. from 1st May 2018

Sr.
Product Detail Photograph Specification Price
No.
Size:- Length: 900mm, Width:600mm, Height: 750mm. C-Frame & Tubular cold rolled close
annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .Top & shelf made of
18mm thick pre-laminated particle board. PVC Edge beading of 2mm edges by Through Feed Machine.
रु 10,675
Computer Table-
1 Shelf adjustable on steel brackets. Removable tubular CPU stand and an embossed modesty panel
Compy
below table top provided. Provision for wire management. Drum Type Leveller. All steel components are
epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of
the product shall be as per photograph.
Size:- Length: 800mm, Width:430mm, Height: 750mm.
रु 6,175
Computer Table- Frame Structure made of 18mm thick Pre-laminated Particle Board. Key board made of Pre-laminated
2
popular Particle Board 18mm thick on telescopic channel slide. Casters for Mobility. Design as per photograph,
Available in wide range of shades.
Size:- Length: 1300mm, Width:600mm, Height: 750mm C- Frame & Tubular cold rolled close
annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .Top & shelf made of
18mm thick pre-laminated particle board. Edge beading of edges by Through Feed Machine. Shelf
रु 17,975
Computer table- adjustable on steel brackets. Removable tubular CPU stand and an embossed modesty panel below
3
Compy-3D table top provided. Provision for wire management. Drum Type Leveller. Fitted with 3 drawer storage
box ( W 350mm D 575mm H 430mm ). All steel components are epoxy powder coated after seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Length:- 900mm, Width:-450mm, Height:-750 mm. C–Frame & tubular cold rolled close
annealed steel structure. Fabrication involves only MIG/TIG & Spot welding . Top made of 18mm thick
Computer table- Pre-laminated Particle Board. PVC Edge beading of 2mm thick by Through Feed Machine. Electrical
4 Compins-main Cable Tray made of 0.6mm thk MS cold rolled close annealed sheet press formed 3 fold 115mm ht. रु 10,225
unit Provision to run cable in legs. Drum Type Leveller. Metal keyboard tray and removable CPU stand. All
steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Length:- 900mm, Width:-450mm, Height:-750 mm. C–Frame & tubular cold rolled close
annealed steel structure. Fabrication involves only MIG/TIG & Spot welding .Top made of 18mm thick
Pre-laminated Particle Board. PVC Edge beading of 2mm thick by through Feed Machine. Electrical
Computer table-
रु 9,275
Cable Tray made of 0.6mm thk MS cold rolled close annealed sheet press formed 3 fold 115mm ht.
5 Compins-add-on
Provision to run cable in legs. Drum Type Leveller. Metal keyboard tray and removable CPU stand. All
unit .
steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note: Add on table can be used with main table only.

Size: Length:- 1050mm, Width:-1050mm, Height:-760 mm. C–Frame & tubular cold rolled close
annealed steel structure. Fabrication involves only MIG/TIG & Spot welding .Top made of 18mm thick
PLPB. PVC Edge beading of 2mm thick by Through Feed Machine. Electrical Cable Tray made of
6 Corner Table 0.6mm thk MS cold rolled close annealed sheet press formed 3 fold 150mm ht. Provision to run cable in रु 16,675
legs. Drum Type Leveller. Metal keyboard tray and removable CPU stand. All steel components are
epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Width:490mm, Depth:245 mm.,( Size without telescopic channel)

Made up of prime quality MS cold rolled close annealed sheet of 0.8mm thk. Fitted with branded
7 Keyboard Tray telescopic channel, Top hanging brackets are provided. All steel components are epoxy powder coated रु 1,700
after seven tanks anti corrosion treatment of surface.
Overall appearance shall be as shown in picture.

Size:- Length :245mm Width:250-300mm, Hight:220mm.Made of press formed MS cold rolled close
annealed sheet 1.6mm thk. The width is adjustable from 150mm to 275mm. Rubber Pads are pasted
8 CPU Trolley inside the trolley for better grip and twin wheel nylon rollers provided for mobility. All steel components रु 1,700
are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Made of 18mm Pre-laminated Particle Board supported by 20mmX20mmX18G Square CR Tube. All
रु 1,000
CPU Stand- Leg
9 steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
Inbuilt
The overall appearance of the product shall be as per photograph.

Size:- Length:900mm, Width: 600mm, Height 750mm

C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG &
Spot welding .Top made of 18mm thick pre-laminated particle board. PVC Edge beading of 2mm thick
रु 8,875
by Through Feed Machine. Dotted embossed steel modesty panel at visitor’s side and with single
10 BT-ST-900
drawer ( W-350mm, H-165mm D-475mm ) with branded telescopic channel. Provided with Drum Type
Leveller. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
surface.
The overall appearance of the product shall be as per photograph.

Page 1 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- Length:1200mm, Width: 600mm, Height 750mm

C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG &
Spot welding .Top made of 18mm thick pre-laminated particle board. Edge beading of edges by
11 BT-ST-1200 Through Feed Machine. Dotted embossed steel modesty panel at visitor’s side and with three drawer ( रु 17,500
W-350mm, H-430mm D-575mm ) with branded roller. Provided with Drum Type Leveller.. All steel
components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:1500mm, Width: 750mm, Height: 750mm

C- Frame & Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG &
Spot welding .Top made of 18mm thick pre-laminated particle board. PVC Edge beading of 2mm thick
12 BT-ST-1500
by Through Feed Machine. Dotted embossed steel modesty panel on visitor’s side and with three
drawer ( W-350mm, H-430mm D-575mm ) with branded telescopic channel. Provided with Drum Type
रु 18,500
Leveller.. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
surface.
The overall appearance of the product shall be as per photograph.
Size:- Length:1200mm, Width: 600mm, Height: 750m
C– Frame Leg 200mm wide made of aluminium profile and cold rolled close annealed formed sections,
having provision for wire management. Top made of 25mm thick Pre-laminated Particle Board.
13 BT-ET-1200 PVC Edge beading of 2mm thick by Through Feed Machine. Dotted embossed cable Duct and रु 10,225
Perforated steel modesty panel on visitor’s side .All steel components are epoxy powder coated after
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Table of size 1200Wx600Dx750H(mm) Top made up of 18mm prelaminated particle board duly sealed
with 2mm thick PVC beading on all sides. Under structure made up of top frame with cold rolled close
annealed MS sheet of 0.9mm thick. Tubular frame of MS ERW round tube of Dia 25mmx1.2mm thick,
रु 17,500
BT-ET-DX-16-A
14 Storage made up of single drawer unit with 0.8mm thick cold rolled close annealed MS sheet of overall
/ Bonton
size 350Wx575Dx430H(mm). Colours Available : Silver Grey and Teak. All steel components are
epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:1350mm, Width: 600mm, Height: 750mm, C– Frame Leg 200mm wide made of
aluminium profile and cold rolled close annealed formed sections, having provision for wire
management. Top made of 25mm thick Pre-laminated Particle Board. PVC Edge beading of 2mm
15 BT-ET-1350 thick by Through Feed Machine. Dotted embossed cable Duct and Perforated steel modesty panel on रु 11,050
visitor’s side .All steel components are epoxy powder coated after seven tanks anti corrosion treatment
of surface.
The overall appearance of the product shall be as per photograph.
Overall size 1500Wx750Dx750H(mm). Table top made up of 18mm thick pre laminated particle board
with 2mm thick lipping on the edges. Under structure made up of MSERW square tube of size
30x30x1.2(mm) thick. Side, front, back panel made up of 18mm prelaminated particle board. Table
रु 36,625
BT-ET-DX-06-A
16 includes pedestal made up of combination of prelaminated panel and MS sheet. Overall size
/ Bonton
450Wx750Dx525H(mm). All steel components are epoxy powder coated after seven tanks anti
corrosion treatment of surface.
The overall appearance of the product shall be as per photograph
Table of size 1365Wx680Dx750H(mm) Top made up of 18mm prelaminated particle board duly
sealed with 2mm thick PVC beading on all sides. Under structure made up of top frame with cold rolled
close annealed MS sheet of 0.9mm thick, tubular frame of MS ERW round tube of Dia 25mmx1.2mm
रु 25,500
BT-ET-DX-17-A thick. Storage made up 0.8mm thick cold rolled close annealed MS sheet with one drawer unit of overall
17
/ Bonton size 350Wx575Dx430H(mm) in three drawer. On other side the size of drawer in two compartment
350Wx575Dx430H(mm). All steel components are epoxy powder coated after seven tanks anti
corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Size:- Length:1500mm, Width:750mm, Height: 750mm, C– Frame Leg 200mm wide made of
aluminium profile and cold rolled close annealed formed sections, having provision for wire
management. Top made of 25mm thick Pre-laminated Particle Board. Edge beading of edges by
18 BT-ET-1500 Through Feed Machine. Dotted embossed cable Duct and Perforated steel modesty panel on visitor’s रु 12,250
side .All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
surface.
The overall appearance of the product shall be as per photograph.
Size:- Length:1800mm, Width: 900mm, Height: 750mm, C– Frame Leg 200mm wide made of
aluminium profile and cold rolled close annealed formed sections, having provision for wire
management. Top made of 25mm thick Pre-laminated Particle Board. Edge beading of edges by
19 BT-ET-1800 Through Feed Machine. Dotted embossed cable Duct and Perforated steel modesty panel on visitor’s रु 14,350
side .All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
surface.
The overall appearance of the product shall be as per photograph.
Overall Size : Table - Lenght-2100mm x Width-900mm x Height-750mm,
Side runner -Width-1200mm x Depth-450mm x Height-750mm,
Back Runner- Width-1650mm x Depth-450mm x Height-750mm,
Corner unit - Lenght-450mm x Width-450mm x Height-750mm,
BT-MF-72, Senio 3Drawer Pedestal size- Width-450mm x Depth-540mm x Height-650mm,
20 Executive Table Table- made of BWR ply wood laminated with good quality mm thk laminate fitted with 25mm thick रु 135,000
Type-I MDF fascia duly deco painted. Door & drawer front made of 18 mm thk BSLPB. Top of desk and cabinet
made
of 12mm thk clear float glass. Product must be in compliance with drawing and as per architect
instruction
Complete product must be knockdown type in construction.

Page 2 of 48
Sr.
Product Detail Photograph Specification Price
No.
ANGULAR TABLE WITH SIDE UNIT, MF-71, Size: Width-2700mm x Depth-1050mm x Height-
750mm.
The table shall be made of 25mm MDF board with 0,6mm thick laminate post form with edge effect of
36mm. The angular section shall be membrane coated or PU painted.
The main table shall have under structure having verticals made of 25mm thick
particle board post formed Legs with modesty made of 25mm thick" particle board
having decorative laminate on both sides.
BT-MF-71, Angular The table shall have a drawer, unit of size 460x575x550 mm having two drawers
21 Table With Side and one filing. The drawer unit shall be made of thick pre-laminated particle रु 109,250
Unit Type-II board with post formed facia.
Side Unit - The overall size of side unit shall be 1800 x 550 x 750mm. Top made of
25mm thick MDF board with 0.6mm laminated post formed on it.
The under structure shall be made of 25mm thick particle board having decorative laminate on both
side. The side unit shall have open able shutter storage and 3 drawer units with facia duly post formed.
Table top and side unit shall have glass top of 12mm thickness duly bevelled. Levellers to be provided
at Bonton.
The overall appearance of the product shall be as per photograph.
Overall table size : W 1800mm x D 900mm x H 750mm, Top made of 36mm thick BSL particle board
and short sides duly seated with PVC edge beading of 2mm thickness. Base made of 36mm thick BSL
BT- MF-102 MD's
particle board with levellers. Top supporting rail of 25mm thick BSL particle board. side runner of size
रु 89,875
Table with side
22 W 1000mm x D 400mm x H 634mm. made of 18mm thick BSL Particle board and top 36mm BSL
runner with drawer
particle board. Side runner shall have one cupboard. pedestal with three drawer shall be provided of
pedestal
450mm width.
Overall appearance of the item shall be as per the photograph.
Overall Size:- Table - Lenght-1800mm x Width-900mm x Height-750mm,
Side runner - Width-900mm x Depth-400mm x Height-750mm,
BT-MF-73, Back Runner-Width-1165mm x Depth-400mm x Height-750mm,
23 Executive Table Comer unit- Lenght-635mm x Width-635mm x Height-750mm, रु 69,000
Type-II Table and side runner made of pre laminated particle board and post form particle board as per design
requirement. All tops 25mm thick and sides made of 18mm thick pre laminated particle board. Table
must be made as per drawing and architects approval.

Overall size of table 1665Wx900Dx750H(mm). Table top made up of 18mm thick prelaminated board
with 2mm thick lipping on the edges. ERU of size 900Wx450Dx720H(mm) made up of 18mm thick
रु 42,500
BT-ET-DX-08-A/
24 prelaminated board top with 2mm thick lipping on all sides. Under structure made up of MSERW square
Bonton
tube of size 30x30x1.2(mm) thick. Side, front, back panel made up of 18mm prelaminated twin board.
Table includes pedestal made up of PLPB of size 450Wx700Dx530H(mm).

Diameter 1200mm height: 750mm Top made of 25 thk and base structure in Plus shape made of
रु 19,425
Round table 18mm .thk pre-laminated particle board. All edges covered with pvc edge beading. Fitted with floor
25
1200mm dia levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube duly Powder
Coated/ Chrome plated. fitted with 25mm Pre-laminated Particle Board top or Glass Top - 12mm thick.

Diameter 900mm height: 750mm Top made of 25 thk and base structure in Plus shape made of
रु 12,250
Round table 18mm .thk pre-laminated particle board. All edges covered with PVC edge beading. Fitted with floor
26
900mm dia levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube duly Powder
Coated/ Chrome plated. fitted with 25mm Pre-laminated Particle Board top or Glass Top - 12mm thick.

Diameter 750mm height: 750mm Top made of 25 thk and base structure in Plus shape made of
रु 10,900
Round table 18mm .thk pre-laminated particle board. All edges covered with pvc edge beading. Fitted with floor
27
750mm dia levellers at bottom. OR Frame made of 1.2 mm thk M.S. cold rolled close annealed tube duly Powder
Coated/ Chrome plated. fitted with 25mm Pre-laminated Particle Board top or Glass Top - 12mm thick.

Size Length 1000mm x width 800mm x Height 750mm

C– Frame Leg made by aluminium profile and cold rolled close annealed formed sections, having
provision for wire management. Top made of 25mm thick Pre-laminated Particle Board. Side Edges
28 BT-EDT- 800 covered with PVC edge band on through feed edge bending machine. Dotted embossed cable Duct रु 9,750
and Perforated steel modesty panel at visitor’s side. All steel components are epoxy powder coated
after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:600mm, Width: 600mm, Height: 750mm, Frame-Tubular cold rolled close annealed
Steel Structure. Use only MIG/TIG & Spot welding for fabrication. Top made of Pre-laminated Particle
29 BT-CCT-600 Board. Side Edges covered with PVC edge band by through feed edge bending machine. All steel रु 4,575
components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:1350mm, Width: 675mm, Height: 750mm,

200mm wide, C– Frame Leg made by aluminium profile and cold rolled close annealed formed sections,
having provision for wire management. Top made of 25mm thick Pre-laminated Particle Board. Side
30 BT-CHR-1350 Edges covered with PVC edge band on through feed edge banding machine. Dotted embossed cable रु 13,600
Duct and Perforated steel modesty panel at visitor’s side. All steel components are epoxy powder
coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Non sharing linear Non sharing linear workstation Main Desk ( 1200 x 600 ) without pedestal. Made of 25mm thick
workstation pre laminated particle board top with pvc edge bending. aluminium frame Screen of size 1050mm x
रु 21,800
Main Desk 350mm in With fabric. Under structure of top made up of 50mm x 50mm x 1.6mm thick & 40mm x
31
(1200mm x 600) 40mm x 1.6mm thick erw tube. with provision of horizontal & vertical cable tray made up of 0.8mm cold
without pedestal ( rolled close annealed sheet curved with bottom & side pillar. All steel components are epoxy powder
Per Seat ) coated followed by saran tanks anti corrosion.

Page 3 of 48
Sr.
Product Detail Photograph Specification Price
No.

Non sharing linear Non sharing linear workstation Add-on Desk ( 1200 x 600 ) without pedestal. Made of 25mm thick
workstation pre laminated particle board top with pvc edge bending. aluminium frame Screen of size 1050mm x
रु 16,500
Add-on Desk 350mm in With fabric. Under structure of top made up of 50mm x 50mm x 1.6mm thick & 40mm x
32
(1200mm x 600) 40mm x 1.6mm thick erw tube. with provision of horizontal & vertical cable tray made up of 0.8mm cold
without pedestal rolled close annealed sheet curved with bottom & side pillar. All steel components are epoxy powder
(Per Seat) coated followed by seven tanks anti corrosion.

Sharing linear Sharing linear workstation Main Desk ( 1200 x 600 ) without pedestal. Made of 25mm thick pre
workstation laminated particle board top with pvc edge bending. aluminium frame Screen of size 1050mm x
रु 14,500
Main Desk 350mm in With fabric. Under structure of top made up of 50mm x 50mm x 1.6mm thick & 40mm x
33
(1200mm x 600) 40mm x 1.6mm thick erw tube. with provision of horizontal & vertical cable tray made up of 0.8mm cold
without pedestal rolled close annealed sheet curved with bottom & side pillar. All steel components are epoxy powder
(Per Seat) coated followed by seven tanks anti corrosion

Sharing linear Sharing linear workstation Add-on Desk ( 1200 x 600 ) without pedestal. Made of 25mm thk pre
workstation laminated particle board top with pic edge bending.
रु 10,500
Add-on Desk aluminium frame Screen of size 1050mm x 350mm in With fabric. Under structure of top made up of
34
(1200mm x 600) 50mm x 50mm x 1.6mm thick & 40mm x 40mm x 1.6mm thick erw tube. with provision of horizontal &
without pedestal vertical cable tray made up of 0.8mm cold rolled close annealed sheet curved with bottom & side pillar.
(Per Seat) All steel components are epoxy powder coated followed by seven tanks anti corrosion

Size:- Length:900/1200mm, thickness:50mm, Height:475mm,Frame made of cold rolled close

Desk Based annealed Steel Structure. Use only MIG/TIG & Spot welding for fabrication. Provision for Cable and
35 Partition With switches and tile - Soft board / White Board / Pre-laminated Particle Board. All steel components are रु 3,700
Cable Duct epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:900/1200mm Width: 75mm, Height: 125mm, Frame made of cold rolled close
annealed Steel Structure. Use only MIG/TIG & Spot welding for fabrication. Provision for Cable and
रु 1,600
Desk Mounting
36 switches. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
Cable Duct
surface.
The overall appearance of the product shall be as per photograph.
21mm thk Partition Modular panel based partition frame are made of Extruded Aluminium sections. The different types of
Panel (Subject to Aluminium profiles used in frame structure of modular partition 21 mm width. Side Panels are made of
37 actual PLPB 18mm with 4mm thk Glass. Front panel are made of PLPB and Fabric / White Writing Board / रु 4,900
measurement at Glass Panels. All Aluminium sections and steel components are powder coated after seven tank anti
site) corrosion treatments.

70mm. Thk. Tiles Base partition. Internal Frame are made by 1.6mm thk. cold rolled close annealed
Partition Panel
powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also
with Tiles (Subject
रु 8,750
available in Glass, Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine.
38 to actual
Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling
measurement at
and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole
sight)
is 1.6mm Thick Aluminium.

Partition
Aluminium section
70mm. Thk. Glass Base partition. Glass partition fitted with Aluminium section. Glass made of 08mm
रु 6,725
with glass
39 thick. Upper and side trim are 70mm thk. extruded powder coated aluminium section and Pole is 1.6mm
(Subject to actual
Thick Aluminium.
measurement at
sight)

Aluminium section
with glass door Partition Aluminium section with glass door (Subject to actual measurement at sight) 70mm. Thk. Glass
40 (Subject to actual Base partition. Glass partition fitted with Aluminium section. Glass made of 08mm thick. Upper and side रु 5,525
measurement at trim are 70mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium.
sight)

Work Top (Subject

Worktop are made of 25mm thick Pre-laminated Particle Board or in MDF in various design and shape
रु 4,100
to actual
41 . All exposed edges are covered with 2mm thk PVC edge bend by machine. fitted to the partition with
measurement at
necessary M.S. cold rolled close annealed duly Powder Coated brackets.
sight)

Side Panel/ Leg

रु 2,100
(18mm Pre- 725mm Height Side panel/leg are made by 18mm thk. Pre-laminated Particle Board fitted with
42
laminated Particle necessary bracket. All exposed edges are covered with 2mm thk. PVC edge bend by machine.
Board)

Full Leg (18mm

रु 2,425
1200mm Height Side panel/leg are made by 18mm thk. Pre-laminated Particle Board fitted with
43 Pre-laminated
necessary bracket. All exposed edges are covered with 2mm thk. PVC edge bend by machine.
Particle Board)

735mm Height, C– Frame Leg made by aluminium profile and cold rolled close annealed formed
sections, having provision for wire management. Fitted with necessary brackets to fix with partition and
रु 2,425
Side Panel/ Leg
44 work Top. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of
(Metal)
surface.
The overall appearance of the product shall be as per photograph.

Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle
Mobile Pedestal
Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic
रु 9,500
unit ( Pre-
45 finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility.
laminated Particle
Special drawer slides for filing drawer. Other drawers on roller slides.
Board)
Overall appearance of product as per photograph.

Page 4 of 48
Sr.
Product Detail Photograph Specification Price
No.
Size : Height : 610m, With : 400mm, Depth :450mm, Body part made-up of prime quality cold rolled
close annealed Sheet use only MIG/TIG & sport welding for fabrication, Body made of 0.8mm thick cold
rolled close annealed Sheet. Drawer with Telescopic Channel slides. Superior quality make multi drawer
46 BT- Pedestal -DR front lock. Drawer front in cold rolled close annealed M.S. Sheet 0.8mm thk. Provision of casters for रु 10,500
mobility. All steel components are epoxy powder coated followed by seven tank anti corrosion treatment
of surface.
The overall appearance of the product shall be as per photograph.

Size: Height:750mm,Width:900mm,Depth:400mm. Body part made-up of prime quality cold rolled

close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-
laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine.
रु 15,750
Side Runner-SDU
47 Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles.
with drawer
Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Height:750mm,Width:900mm,Depth:400mm Body part made-up of prime quality CRCA Sheet

Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick PLPB. Side Edges covered
with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic
रु 18,725
SDU with Top
48 channel. Door set make lock. PVC/ Aluminium handles. Doors in PLPB/CRCA M.S. Sheet. Doors are
Length 1300mm
Top hung slide on roller bearing. All steel components should be epoxy powder coated followed by
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Height:640mm, Width:350mm, Depth:525mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick . Side
रु 6,500
Edges covered with PVC edge band on edge bending machine. Door set make lock. Door in cold rolled
49 BT-MSU-Door Unit
close annealed M.S. Sheet. Provision of castors for mobility. All steel components should be epoxy
powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size : Width:350mm depth: 575mm xHight:430mm

Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding
रु 8,250
for fabrication. Drawer with telescopic channel. Door set make lock. Drawer front in cold rolled close
50 BT-SU-3D
annealed M.S. Sheet. All steel components are epoxy powder coated followed by seven tanks anti
corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size : Width:350mm depth: 575mm xHight:430mm

Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding
51 BT-SU-Door unit for fabrication. Door set make lock. Door in cold rolled close annealed M.S. Sheet. All steel components रु 5,525
are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall
appearance of the product shall be as per photograph.

रु 10,150
Size : Length-1200mm, Depth-450mm, Height-450mm,
52 Wall Storage
Made Of 18mm thick Pre-laminated Particle Board.

Size: Height:1200mm,Width:900mm, Depth:400mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-
laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Door set
53 BT-SDU-1200 make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on रु 16,625
roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:750mm,Width:900mm, Depth:400mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-
laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Door set
54 BT-SDU-750 make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on रु 12,425
roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1290mm,Width:474mm, Depth:620mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Drawer slide on pvc roller
55 BT-FC-4D bearing slides. Lock front mounting Ebco / Door set make. Inbuilt type drawer handles. All steel रु 23,150
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:680mm,Width:474mm, Depth:620mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Drawer slide on pvc roller
56 BT-FC-2D bearing slides. Lock front mounting Ebco / Door set make. Inbuilt type drawer handles. All steel रु 15,475
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:925mm, Width:838mm, Depth:310 mm ( 2-door ) Body part made-up of prime quality
cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Doors made of MS
रु 13,800
cold rolled close annealed formed sections fitted with 4mm thk glass. Doors open and slide on pvc
57 BT-BC-2D
rollers. Lock front mounting superior quality make. All steel components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 5 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- Height:1675mm, Width:838mm, Depth:310mm ( 4-Door )

Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding
रु 18,425
for fabrication. Doors made of MS cold rolled close annealed formed sections fitted with 4mm thk glass.
58 BT-BC-4D
Doors open and slide on pvc rollers. Lock front mounting superior quality make. All steel components
are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1750mm, Width:920 mm, Depth:330 mm( 4-Door ) Material Prime quality CRCA sheet
0.8mm thick. Compartment door: Each compartment shall provide to-hung glass door, which swings,
open upwards and slides into the casing when fully open by means of rollers. The overall size of glass
3mm thickness shall be such, that all the books in compartment shall be visible. for proper alignment of
59 BT-BC-4D- NEW glass door cross plate (patti) arrangement i.e. scissor system is to be fitted in each door. Construction: रु 20,175
All the components are neat and clean with strong joints. Lock & Handles: Two Nos. good quality
handles are provided on each door with precision lock. Key shall be common for all compartment lock.
Finish: The bookcase shall be powder coated after seven tanks pre-treatment.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:838 mm, Depth:610mm ( 5 doors- Both side ) Body part made-up of
prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Doors
रु 42,875
made of MS cold rolled close annealed formed sections fitted with 4mm thk glass. Doors open and slide
60 BT-BSBC-5D
on pvc rollers. Lock front mounting superior quality make. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.4 adjustable shelf. Three way
रु 23,600
locking device with six levers superior quality lock for Door. Doors are mounted on steel hinge brackets.
61 BT-AL-01
Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-height:1980mm, width:910mm depth:485mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.1 adjustable shelf, one locker
रु 24,375
along with width. Three way locking device with six levers superior quality lock for Door. Doors are
62 BT-AL-01L
mounted on steel hinge brackets. All steel components are epoxy powder coated followed by seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Size:-height:1270mm, width:760mm depth:430mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. 2 adjustable shelf .Three way
रु 16,650
locking device with six levers superior quality lock for Door . Doors are mounted on steel hinge
63 BT-AL-02
brackets. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Size :- height:1270mm, width:760mm depth:430mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. One locker along with width
रु 17,250
.Three way locking device with six levers superior quality lock for Door. Doors are mounted on steel
64 BT-AL-02L
hinge brackets. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-height:1980mm, width:910mm depth:380mm Body part made-up of prime quality cold rolled
close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.5 adjustable shelf. Three way
रु 23,600
locking device with six levers superior quality lock for Door . Doors made of press formed MS cold rolled
65 BT-AL-02GD
close annealed sections with 4mm glass. Doors are mounted on steel hinge brackets. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Size:-height:1980mm, width:910mm, depth:560mm ( Both side open able 4 doors ) Body part
made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for
fabrication. 5 adjustable shelf. Three way locking device with six levers superior quality lock for Door.
66 BT-AL-04GD Doors made of press formed MS cold rolled close annealed sections with 4mm glass. Doors are रु 33,800
mounted on steel hinge brackets. All steel components are epoxy powder coated followed by seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Size:- Height:1980mm, Width:915mm, Depth:485mm( 6 door), Body part made-up of prime quality
cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Individual
रु 27,175
compartment having individual door, with six levers superior quality lock. Louvers are provided in doors
67 BT-IL-6D
for ventilation. Doors are mounted on steel hinge brackets. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1980mm, Width:915mm, DepthL485mm( 9 doors) Body part made-up of prime quality
cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Individual
रु 28,000
compartment having individual door, with six levers superior quality lock. Louvers are provided in doors
68 BT-IL-9D
for ventilation. Doors are mounted on steel hinge brackets. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1980mm, Width:915mm, Depth: 485mm (12 doors), Body part made-up of prime
quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Individual
रु 29,625
compartment having individual door, with six levers superior quality lock. Louvers are provided in doors
69 BT-IL-12D
for ventilation. Doors are mounted on steel hinge brackets. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 6 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- Height:1980mm, Width:915mm, Depth: 485mm ( 10 Hole ), Body part made-up of prime
quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Special
रु 26,800
Pigeon hole construction to keep diff material as shown in picture .Three way locking device with six
70 BT-PH-10
levers superior quality lock for Door . Doors are mounted on steel hinge brackets. All steel components
are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1980mm, Width:915mm, Depth: 485mm (18 holes), Body part made-up of prime
quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Special
रु 29,625
Pigeon hole construction to keep diff material as shown in picture .Three way locking device with six
71 BT-PH-18
levers superior quality lock for Door . Doors are mounted on steel hinge brackets. All steel components
are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 6 door), Body part made-up of prime quality
cold rolled close annealed Sheet of 1mm & 0.8mm thickness, Use only Spot welding for fabrication.
Knockdown constructions, Individual compartment having individual door, with six levers superior
रु 13,650
BT-Locker Main
72 quality lock. special Holes are provided in doors for ventilation. Doors are mounted on Pivot with steel
Unit with 6 Door
handle. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment
of surface.
The overall appearance of the product shall be as per photograph.
Size:- Height:1950mm, Width:380mm, Depth:450mm ( 6 door), Body part made-up of prime quality
cold rolled close annealed Sheet of 1mm & 0.8mm thickness, Use only Spot welding for fabrication.
Knockdown constructions, Individual compartment having individual door, with six levers superior
रु 12,250
BT-Locker Add-on
73 quality lock. special Holes are provided in doors for ventilation. Doors are mounted on Pivot with steel
Unit with 6 Door
handle. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment
of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 5 door), Body part made-up of prime quality
"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 12,675
BT-Locker Main compartment having individual door, with 5 multipurpose lock. Holes are provided in doors for
74
Unit with 5 Door ventilation. Doors are mounted on Pivot with steel handle. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 5 door),Body part made-up of prime quality

"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 11,300
BT-Locker Add-on compartment having individual door, with 5 multipurpose lock. Holes are provided in doors for
75
Unit with 5 Door ventilation. Doors are mounted on Pivot with steel handle. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 4 door), Body part made-up of prime quality
"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 11,775
BT-Locker Main compartment having individual door, with 4 multipurpose lock. Holes are provided in doors for
76
Unit with 4 Door ventilation. Doors are mounted on Pivot with steel handle. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 4 door), Body part made-up of prime quality
"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 10,350
BT-Locker Add-on compartment having individual door, with 4 multipurpose lock. Holes are provided in doors for
77
Unit with 4 Door ventilation. Doors are mounted on Pivot with steel handle. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 3 door), Body part made-up of prime quality
"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 10,750
BT-Locker Main compartment having individual door, with 3 multipurpose lock. Holes are provided in doors for
78
Unit with 3 Door ventilation. Doors are mounted on Pivot with steel handle. components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1950mm, Width:380mm, Depth:450mm ( 3 door), Body part made-up of prime quality
"cold rolled close annealed" Sheet of 1mm & 0.8mm thickness, Knockdown constructions, Individual
रु 9,425
BT-Locker Add-on compartment having individual door, with 3 multipurpose lock. Holes are provided in doors for
79
Unit with 3 Door ventilation. Doors are mounted on Pivot with steel handle. components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size-900x380x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8mm thick cold rolled close annealed
COMPACTOR-
रु 23,600
sheet. Bottom track channel is 100 x 25x2mm. With central locking arrangement. Each body has 5
80 Single Body-Fix-
loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components are
Main Unit
treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness of
minimum 45-50 microns.

Size- 900x380x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 21,175
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
81 Single Body-Fix-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Page 7 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size-900x380x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 25,150
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
82 Single Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Main Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size- 900x380x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 22,750
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
83 Single Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size-900x760x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 40,550
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
84 Double Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Main Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size-900x760x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 36,600
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
85 Double Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Additional For Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of
86 Mechanical Drive machine parts, sprocket, chain etc. All machine parts should be Zink plated. All sheet metal रु 15,750
( each row ) components should be epoxy powder coated with anti corrosion treatment of surface.

Size-900x450x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 25,550
annealed sheet. Bottom track channel is 100 x 25 x 2mm. With central locking arrangement. Each body
87 Single Body-Fix-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Main Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size- 900x450x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick
cold rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 23,275
annealed sheet. Bottom track channel is 100x25x2 mm. With central locking arrangement. Each body
88 Single Body-Fix-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size-900x450x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 27,450
annealed sheet. Bottom track channel is 100x25x2 mm. With central locking arrangement. Each body
89 Single Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Main Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size- 900x450x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick
cold rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 25,050
annealed sheet. Bottom track channel is 100x25x2 mm. With central locking arrangement. Each body
90 Single Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size-900x900x2100 ht. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 44,675
annealed sheet. Bottom track channel is 100x25x2 mm. With central locking arrangement. Each body
91 Double Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Main Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Size-900x900x2100 ht.. The system has a rigid knock down construction made out of 0.8 mm thick cold
rolled close annealed steel body. Adjustable shelves made up of 0.8 mm thick cold rolled close
COMPACTOR-
रु 40,300
annealed sheet. Bottom track channel is 100x25x2 mm. With central locking arrangement. Each body
92 Double Body-
has 5 loading levels adjustable shelves of load carrying capacity is 50 kg per shelf. All steel components
Mobile-Addon Unit
are treated for anti rust surface and powder coated with epoxy polyester powder with dry film thickness
of minimum 45-50 microns.

Additional For Body structure made of 1 mm thick cold rolled close annealed sheet & internal structure made of
93 Mechanical Drive ( machine parts, sprocket, chain etc. All machine parts are Zink plated. All sheet metal components are रु 15,750
EACH ROW ) epoxy powder coated with anti corrosion treatment of surface.

Size- L-1200mm x W-365 x H-450mm.

रु 7,675
Nursery Desk 2 MS under structure shelf frame made of CRCA Pipe 70x26x1.2mm powder coated with curvature top 18
94
Seater with chairs mm PLPB. Shelf made of 12mm PLPB , Front panel CRCA 0.8mm sheet, Leg pip 1.2mm thick reduce
pipe dia.

Page 8 of 48
Sr.
Product Detail Photograph Specification Price
No.
Overall Dimensions: Seat : W-480mm x D-725mm x Ht-560mm Seat Structure: Made up of MS cold
rolled close annealed tube dia 19mm x 1.2mm thk. Desk Structure: Made up of MS cold rolled close
रु 5,200
Nursery Desk annealed Tube 25x25x1.25 thk MIG welded. Seat & Desktop made of 18mm thk Pre-laminated particle
95
Single Seater board. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment
of surface.
The overall appearance of the product shall be as per photograph.

Overall Dimensions: Seat : W-1500mm x D-925mm x Ht-750mm Seat Structure: Made up of cold
rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled close
annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk. Desk
Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press formed
रु 13,300
Dual Desk BT-DD-
96 MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
30 PLB 3-Seater
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Overall Dimensions: Seat: W-1050mm x D-950/450 mm x Ht-760/450mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre- रु
Dual Desk BT-DD-
97
30 PLB
10,225
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Overall Dimensions: Seat : W-1050mm x D-950/450mm x Ht-710/425mm Seat Structure: Made up
of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
BT-DD-28 with
रु 10,125
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
98 pre-laminated
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
particle board Top
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- CLASS VI TO CLASS IX
Overall Dimensions: Seat : W-1050mm x D-950/450mm x Ht-660/400mm Seat Structure: Made up
of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
BT-DD-26 with pre-
रु 10,000
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
99 laminated particle
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
board Top
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- CLASS III TO CLASS V
Overall Dimensions: Seat : W-900mm x D-900/400 mm x Ht-610/375mm Seat Structure: Made up
of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
BT-DD-24 with pre-
रु 9,650
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
100 laminated particle
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
board Top
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- For Class-1st to Class 2nd.

Overall Dimensions: Seat : W-900mm x D-900/400mm x Ht-560/360mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
BT-DD-22 with pre-
रु 9,600
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
101 laminated particle
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
board Top
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- For Class-1st to Class 2nd.

Overall Dimensions: Seat : W-900mm x D-900/400mm x Ht-460/300mm Seat Structure: Made up of

cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
BT-DD-18 with pre-
रु 9,550
formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
102 laminated particle
laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
board Top
table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR KG-I TO KG-II.

Overall Dimensions: Seat : W-600mm x D-950/450mm x Ht-760/450mm Seat Structure: Made up of

cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
BT-Single Desk- Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 7,675
30 with pre- formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick pre-
103
laminated particle laminated particle board. Side edges covered by teak wood polished rib. Provided book shelf below
board Top table top. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR X TO COLLEGE
Page 9 of 48
Sr.
Product Detail Photograph Specification Price
No.

Overall Dimensions: Seat: W-1050mm x D-950/450mm x Ht-760/450mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 12,075
BT-DD-30 with
104 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
Postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR X TO COLLEGE

Overall Dimensions: Seat : W-1050mm x D-950/450mm x Ht-710/425mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 11,975
BT-DD-28 with
105 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
Postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- CLASS VI TO CLASS IX

Overall Dimensions: Seat: W-1050mm x D-950/450mm x Ht-660/400mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 11,900
BT-DD-26 with
106 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
Postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- CLASS III TO CLASS V

Overall Dimensions: Seat : W-900mm x D-900/400mm x Ht-610/375mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 11,125
BT-DD-24 with
107 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
Postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR KG II TO CLASS II

Overall Dimensions: Seat : W-900mm x D-900/400mm x Ht-560/360mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 11,100
BT-DD-22 with
108 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- For Class-1st to Class 2nd.

Overall Dimensions: Seat : W-900mm x D-900/400mm x Ht-460/300mm Seat Structure: Made up

of cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 11,050
BT-DD-18 with
109 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Postform Top
Postform top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR NUR. II TO KG I

Overall Dimensions: Seat : W-600mm x D-950/450mm x Ht-760/450mm Seat Structure: Made up of

cold rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled
close annealed section 95x25x1.0 thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk.
Desk Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press
रु 8,700
BT-Single Desk-30
110 formed MS cold rolled close annealed section 95x25x1.0 thk. Seat & Desktop made of 18mm thick
Post form top
Post form top. Side edges covered by teak wood polished rib. Provided book shelf below table top. All
steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Note:- FOR X TO COLLEGE

Overall Dimensions: Seat : W-1065mm x D-1000mm x Ht-750mm: Seat Structure: Made up of cold
rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled close
Dual Desk with annealed section 95x25x1.0 thk and MS cold rolled close annealed tube 20x40x1.2mm thk. Desk
Wooden Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press formed
111 perforated seat, MS cold rolled close annealed section 95x25x1.0 thk. Desktop made of 18mm thick Post form. Seat रु 12,075
back & Post form and back are wooden moulded veneer faced mounted on 19mm dia 1.2mm thk tubular structure. Side
top edges of Top covered by teak wood polished rib. Provided book shelf below table top. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 10 of 48
Sr.
Product Detail Photograph Specification Price
No.

Overall Dimensions: Seat : W-1065mm x D-1000mm x Ht-750mm: Seat Structure: Made up of cold
rolled close annealed MS Tube 50x25x1.25mm thk MIG welded to press formed MS cold rolled close
annealed section 95x25x1.0 thk and MS cold rolled close annealed tube 20x40x1.2mm thk. Desk
Dual Desk with Structure: Made up of MS cold rolled close annealed Tube 50x25x1.25 thk MIG welded to press formed
रु 10,900
Wooden MS cold rolled close annealed section 95x25x1.0 thk. Desktop made of 18mm thick pre-laminated
112
perforated seat, particle board. Seat and back are wooden moulded veneer faced mounted on 19mm dia 1.2mm thick
back & plb top tubular structure. Side edges of Top covered by teak wood polished rib. Provided book shelf below table
top. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of
surface.
The overall appearance of the product shall be as per photograph.
Front Row Overall Size :- W500mm, D405mm, H750mm, Tablet size :- W430mm, D315mm,
12mm thick, Front mould size : Height 467mm, Width 478mm, 12mm thick,:- Mounted on
64mmx64mmx3mm aluminium glide fitted with MS cold rolled close annealed leg made of
60mmx60mmx2mm MS tube and MS sheet 3mm thick covered with nylon cap. Front of desk & back of
chair made of 12mm thick hot pressed ply. Foldable seat made of 12mm thick hot pressed ply. Tablet
made of 12mm thick postform on MDF board.-sliding & foldable in specially designed nylon mould
रु 7,725
BT- 4000 Front
113 accessories fitted on top aluminium glide of 30mmx70mm. All steel components are powder coated
Row - Only Desk
while aluminium glides are anodized.
Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Middle Row Overall Size :- Width 500mm, Depth 800mm, Height 750mm, Tablet size :- Width
430mm, Depth 315mm, 12mm thick, Seat size :- Width 477mm, Depth 377mm, 12mm thick, Back
mould size : Height 467mm, Width 478mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium
glide fitted with MS cold rolled close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet
3mm thick covered with nylon cap. Front of desk & back of chair made of 12mm thick hot pressed ply.
BT- 4000 Middle Foldable seat made of 12mm thick hot pressed ply. Tablet made of 12mm thick postform on MDF board-
114 Row - Desk with sliding & foldable in specially designed nylon mould accessories fitted on top aluminium glide of रु 11,175
Bench 30mmx70mm.All steel components are powder coated while aluminium glides are anodized.
Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Back Row Overall Size :- Width 500mm, Depth 507mm, Seat Size : Width 477mm, Depth 377mm,
12mm thick, Height 460mm. Back mould size : Height 467mm, Width 478mm, 12mm thick,
Mounted on 64mmx64mmx3mm aluminium glide fitted with MS cold rolled close annealed leg made of
60mmx60mmx2mm MS tube and MS sheet 3mm thick covered with nylon cap. Front of desk & back of
chair made of 12mm thick hot pressed ply. Foldable seat made of 12mm thick hot pressed ply. Tablet
made of 12mm thick post form on MDF board-sliding & foldable in specially designed nylon mould
रु 9,275
BT- 4000 Back
115 accessories fitted on top aluminium glide of 30mmx70mm. All steel components are powder coated
Row- Only Bench
while aluminium glides are anodized.
Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.
Front Row Overall Size :- W500mm, D405mm, H750mm, Tablet size :- W430mm, D315mm,
12mm thick, Front mould size : Height 467mm, Width 478mm, 12mm thick,:- Mounted on
64mmx64mmx3mm aluminium glide fitted with MS cold rolled close annealed leg made of
60mmx60mmx2mm MS tube and MS sheet 3mm thick covered with nylon cap. Front row of back with
15mm thick PU Foam on plywood and fully covered with upholstery cloth. Tip up foldaway writing table
BT- E- 4000 Front
रु 12,075
with antipanic movement. Made up of 12mm thick postformed on MDF board. All steel components are
116 Row - Only Desk
powder coated while aluminium glides are anodized.
With Cushion
Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Middle Row Overall Size :- W500mm, D405mm, H750mm, Tablet size :- W430mm, D315mm,
12mm thick, Front mould size : Height 467mm, Width 478mm, 12mm thick,:- Mounted on
64mmx64mmx3mm aluminium glide fitted with MS cold rolled close annealed leg made of
60mmx60mmx2mm MS tube and MS sheet 3mm thick covered with nylon cap. Middle row of foldable
BT- 4000 Middle seat & back with 15mm thick PU Foam on plywood and fully covered with upholstery cloth. Tip up
रु 15,725
Row - Desk with foldaway writing table with antipanic movement. Made up of 12mm thick postformed on MDF board. All
117
Bench with steel components are powder coated while aluminium glides are anodized.
cushion. Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Page 11 of 48
Sr.
Product Detail Photograph Specification Price
No.
Back Row Overall Size :- W500mm, D405mm, H750mm, Seat size :- W477mm, D377mm, 12mm
thick, Front mould size : Height 467mm, Width 478mm, 12mm thick:- Mounted on
64mmx64mmx3mm aluminium glide fitted with MS cold rolled close annealed leg made of 60mm
x60mm x2mm MS tube and MS sheet 3mm thick covered with nylon cap. Back row of foldable seat
back with 15mm thick, PU Foam on plywood and fully covered with upholstery cloth. Tip up foldaway
BT- 4000 Back writing table with antipanic movement. Made up of 12mm thick post formed on MDF board. All steel
118 Row- Only Bench components are powder coated while aluminium glides are anodized. रु 13,925
with cushion. Overall appearance of the product as shown in photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Size- Width1116mm, Size D-450mm, Ht 750mm: Structure made up of M.S.cold rolled close
annealed 1.6mm thick pedestal welded to press formed MS cold rolled close annealed section
95x25x1.0mm thk. Desktop made of 18mm thick pre-laminated particle board. Side edges covered by
teak wood polished rib. Book self provided below top. Grouted by anchor bolt. All steel components are
रु 8,250
BT-GD-Main (two epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
119
Seated) The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Size- Width1088mm, Size D-450mm, Ht 760mm: Structure made up of M.S.cold rolled close annealed
1.6mm thick pedestal welded to press formed MS cold rolled close annealed section 95x25x1.0mm thk.
Desktop made of 18mm thick pre-laminated particle board. Side edges covered by teak wood polished
rib. Book self provided below top. Grouted by anchor bolt. All steel components are epoxy powder
रु 6,950
BT-GD-Add-on two coated followed by seven tanks anti corrosion treatment of surface.
120
seated The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Size- Width:608mm, Size D-450 mm, Ht 760mm: Structure made up of M.S.cold rolled close
annealed 1.6mm thick pedestal welded to press formed MS cold rolled close annealed section
95x25x1.0mm thk. Desktop made of 18mm thick pre-laminated particle board. Side edges covered by
teak wood polished rib. Book self provided below Top. Grouted by anchor bolt. All steel components are
रु 5,725
BT-GD-Main epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
121
(Single Seated ) The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Overall Dimensions: W580mm x D450 mm x Ht 760mm: Structure made up of M.S.cold rolled close
annealed 1.6mm thick pedestal welded to press formed MS cold rolled close annealed section
95x25x1.0mm thk. Desktop made of 18mm thick pre-laminated particle board. Side edges covered by
teak wood polished rib. Book self provided below top. Grouted by anchor bolt. All steel components are
रु 4,775
BT-GD-Add-on epoxy powder coated followed by seven tanks anti corrosion treatment.
122
single seated The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Overall Dimensions: Seat : W-1115mm x D-300 mm x Seat Ht- 450mm: Structure Made up of MS
cold rolled close annealed 1.6mm thick pedestal MIG welded to press formed MS cold rolled close
annealed sheet 95x25x1.0mm thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk. Seat
and back made of 18mm thick pre-laminated particle board. Side edges covered with teak wood
beading duly polished. Grouted on floor by anchor bolt. Book rack optional below seat. All steel
123 BT-CB-Main components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. रु 8,675
The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Overall Dimensions: Seat : W1088mm x D-300 mm x Seat Ht :-450mm: Structure Made up of MS

cold rolled close annealed 1.6mm thick pedestal MIG welded to press formed MS cold rolled close
annealed sheet 95x25x1.0mm thk and MS cold rolled close annealed tube dia 25mm x1.2mm thk. Seat
and back made of 18mm thick pre-laminated particle board. Side edges covered with teak wood
beading duly polished. Grouted on floor by anchor bolt. Book rack optional below seat. All steel
124 BT-CB Add-on components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. रु 7,650
The overall appearance of the product shall be as per photograph.
Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or otherwise written
confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Overall Dimension: W-600mmX D-450mmX H-1260mm: - 200mm wide Leg section made of
extruded Aluminium section and MS cold rolled close annealed covers for wire management. Top made
रु 11,775
up of 18mm the prelaminated partial board with teak wooden edge banded on edges. One edge
125 Podium
protruded up, would be of teak wood to hold the paper / books. All metal section powder-coated with
min. 45 micron DFT after anti corrosion surface treatment.
Appearance of product as per Photograph.
Page 12 of 48
Sr.
Product Detail Photograph Specification Price
No.
Overall Size:- H:-1980mm, W:-915mm, D:-380mm: Body Structure: Made up of prime quality cold
rolled close annealed MS sheet 1.0mm thk 3 fold side panel with dia 9mm hole in middle of each
panel throughout the height at 25mm pitch for height adjustability of shelves. Adjustable middle shelf
रु 17,500
BT-SS-Racking
126 made out of Prime Quality cold rolled close annealed 1.0mm thk. Sheet. Complete knockdown
Main Single Side
assembly. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
Overall appearance as per photograph.
Overall Size:- H:-1980mm, W:-915mm, D:-380mm: Body Structure: Made up of prime quality cold
rolled close annealed MS sheet 1.0mm thk 3 fold side panel with dia 9mm hole in middle of each
BT-SS-Racking panel throughout the height at 25mm pitch for height adjustability of shelves. Adjustable middle shelf
127 Add-on Single made out of Prime Quality cold rolled close annealed 1.0mm thk. Sheet. Complete knockdown रु 13,500
Side assembly. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
Overall appearance as per photograph.
Overall Size:- H:-1980mm,,W:-915mm D:535mm.: Body Structure: Made up of prime quality cold
rolled close annealed MS sheet 1.0mm thk 3 fold side panel with dia 9mm hole in middle of each
panel throughout the height at 25mm pitch for height adjustability of shelves. Adjustable middle shelf
रु 23,500
BT-BS-Racking -
128 made out of Prime Quality cold rolled close annealed 1.0mm thk. Sheet. Complete knockdown
Main Both Side
assembly. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
Overall appearance as per photograph.
Overall Size:- H:-1980mm,,W:-915mm D:535mm.: Body Structure: Made up of prime quality cold
rolled close annealed MS sheet 1.0mm thk 3 fold side panel with dia 9mm hole in middle of each
panel throughout the height at 25mm pitch for height adjustability of shelves. Adjustable middle shelf
रु 16,500
BT-BS-racking
129 made out of Prime Quality cold rolled close annealed 1.0mm thk. Sheet. Complete knockdown
Add-on Both Side
assembly. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
Overall appearance as per photograph.

Overall Size:- H:-1980mm, W:-380mm D:-380mm: Made up of prime quality MS cold rolled close
रु 13,325
BT-Bag Rack- annealed sheet. Shelf - 5 nos making six compartments. All steel components are epoxy powder coated
130
Main followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Overall Size:- H:-1980mm,,W:-360mm D:380mm. Made up of prime quality MS cold rolled close
रु 9,275
BT-Bag Rack- Add- annealed sheet. Shelf - 5 nos making six compartments. All steel components are epoxy powder coated
131
on followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Overall Size:- H:-1075mm,,W:-300mm D:350mm:

Made up of prime quality MS cold rolled close annealed sheet. Shelf - 5 nos making six compartments.
रु 8,075
BT-Shoe Rack-
132 All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of
Main
surface.
The overall appearance of the product shall be as per photograph.

Overall Size:- H:-1075mm, W:-275mm, D:-350mm :

Made up of prime quality MS cold rolled close annealed sheet. Shelf - 5 nos making six compartments.
रु 5,925
BT-Shoe Rack-
133 All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of
Add-on
surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1900mm, Width:300mm, Depth:400mm:

Sides made of 18mm thick pre-laminated particle board. Edges covered with PVC edge band on
रु 15,475
Magazine Rack through feed edge bending machine. Shelf tray & Bottom Panel made by M.S.cold rolled close
134
main annealed Sheet. Tray slides on pvc roller bearing. All steel components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Height:1900mm, Width:283mm, Depth:400mm:

Sides made of 18mm thick pre-laminated particle board. Edges covered with PVC edge band on
रु 12,800
Magazine Rack through feed edge bending machine. Shelf tray & Bottom Panel made by M.S.cold rolled close
135
Add-on annealed Sheet. Tray slides on pvc roller bearing. All steel components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Width:- 750mm x Depth:- 1000mm x Height:- 1200mm ( For 2 News Paper ), Frame
Structure : Made up of Prime quality cold rolled close annealed Rectangular pipe 25x50x1.2mm thk
रु 13,375
BT-News Paper MIG welded to Press formed steel column 105mm x 25mm x 1.0mm thk. Top made of 18mm thick pre-
136
Stand both side laminated particle board. Side edges covered with PVC edge band on edge bending machine. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Width:- 750mm x Depth:- 500mm x Height:- 1200mm ( For 1 News Paper ), Frame
Structure : Made up of Prime quality cold rolled close annealed Rectangular pipe 25x50x1.2mm thk
रु 7,425
BT-News Paper MIG welded to Press formed steel column 105mm x 25mm x 1.0mm thk. Top made of 18mm thick pre-
137
Stand single side laminated particle board. Side edges covered with PVC edge band on edge bending machine. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size: Width:- 168mm x Depth:- 160mm x Height:- 190mm with 1.2mm thick : Made up of Prime
रु 225
quality cold rolled close annealed Press formed sheet. Epoxy powder coated followed by seven tanks
138 Book Stopper
anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 13 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- Length:2100mm, Width:900mm, Height:750mm:- T

– Frame made of press formed MS cold rolled close annealed sheet and tubes, MIG/TIG & Spot
रु 16,625
Reading Table welding for fabrication. Top made of 18mm thick pre-laminated particle board. Side Edges covered
139
7'x3' with PVC edge band on edge bending machine. Perforated modesty panel at centre of table. All steel
components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length: 1350mm, Width:900mm, Height:750mm,

T – Frame made of press formed MS cold rolled close annealed sheet and tubes, MIG/TIG & Spot
रु 12,075
Reading Table welding for fabrication. Top made of 18mm thick pre-laminated particle board. Side Edges covered
140
4.5'x3' with PVC edge band on edge bending machine. Perforated modesty panel at centre of table. All steel
components are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:2100mm, Width: 900mm. Height: 750mm,

T – Frame made of press formed MS cold rolled close annealed sheet and tubes, MIG/TIG & Spot
रु 18,275
welding for fabrication. Top made of 25mm thick pre-laminated particle board. Side Edges covered
141 Lab Table (7'x3')
with PVC edge band on edge bending machine. One self at middle of table height. All steel components
are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:1350mm, Width: 900mm. Height: 750mm,

T – Frame made of press formed MS cold rolled close annealed sheet and tubes, MIG/TIG & Spot
रु 13,425
welding for fabrication. Top made of 25mm thick pre-laminated particle board. Side Edges covered
142 Lab Table (4.5'x3')
with PVC edge band on edge bending machine. One self at middle of table height. All steel components
are epoxy powder coated after seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-Length:1200mm,Width 750mm, Height 1150mm,

Storage depth is 560 mm & top overhang by 190mm at front. Body part made-up of prime quality cold
rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 25mm thick
रु 19,500
Lab SDU With Top pre-laminated particle board. Side Edges covered with PVC edge band on edge bending machine. One
143
Shelf adjustable shelve inside storage and Pre-laminated Particle Board Shelf above Work Top for keeping
instruments. Locks Ebco / Doorset cylindrical. All steel components are epoxy powder coated followed
by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-Length:1200mm, Width:- 750mm, Height:-900mm, Storage depth is 560 mm & top overhang by
190mm at front. Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG
& Spot welding for fabrication. Top made of 25mm thick pre-laminated particle board. Side Edges
144 Lab SDU covered with PVC edge band on edge bending machine. One adjustable shelf inside storage. Locks रु 17,200
Ebco / Doorset cylindrical. All steel components are epoxy powder coated followed by seven tanks anti
corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length: 1000mm, Depth:300mm, Height: 600mm. Bottle Rack Structure made up of prime
Chemistry Lab quality MS cold rolled close annealed sheet 20G & 22G thk 3 fold press form side panel with dia 9mm
145 Rack Both Side holes in each panel throughout the height at 25mm pitch for adjustability of shelves. All steel रु 9,425
(Main Unit) components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Powder
coating thk. 50-60 micron
Size:- Length: 1000mm, Depth:150mm, Height: 600mm. Bottle Rack Structure made up of prime
Chemistry Lab quality MS cold rolled close annealed sheet 20G & 22G thk 3 fold press form side panel with dia 9mm
146 Rack Single Side holes in each panel throughout the height at 25mm pitch for adjustability of shelves. All steel रु 6,725
(Main Unit) components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Powder
coating thk. 50-60 micron
Size: Length: 900, Width:- 600mm, height:- 930mm
T – Frame made of press formed and tubular cold rolled close annealed steel sections. Use only
MIG/TIG & Spot welding for fabrication. Top made of 18mm thick pre-laminated particle board. Side
147 Drawing Table edges covered with PVC edge band on edge bending machine. Top tilting arrangement for adjustability. रु 8,350
Drum Type Leveller for adjusting height. All steel components are epoxy powder coated followed by
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Specification: Size:H:710, Seat:H:550, D:300,

Under Structure:-Made up of MS cold rolled close annealed,18G tube. Top made of 18mm thick pre-
रु 1,500
Lab Stool/ Drg.
148 laminated particle board. Side edges covered with teak wood beading duly polished. All steel
Stool
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

रु 5,550
Premium Lab Over all Size :- Height : 1050mm, Depth: 300mm, Width: 450mm, Base made of chrome plated, MS
149
Stool CRCA single pipe, Seat 12mm thick moulded ply with hand PVC Upholstery.

Under Structure:-Made up of MS cold rolled close annealed,18G tube cushioned seat and back wih 12
रु 3,225
mm ply.. All steel components are epoxy powder coated followed by seven tanks anti corrosion
150 Revolving Stool
treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 14 of 48
Sr.
Product Detail Photograph Specification Price
No.

Lab table both side usable of size- W:600mmxD:1200mmxHt:900mm. The frame made of MS cold
rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and horizontal tie member made
of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black granite supported on fibber
रु 45,000
Sink table Both
151 cement board 10 mm thk. The door made of press formed cold rolled close annealed sheet fitted with
Side
cylindrical hinge with provision to hang the door with frame. The sink made of Ceramic or Stainless steel
1mm thk and tap made of stainless steel. All steel components are epoxy powder coated after seven
tanks anti corrosion treatment of surface. Powder coating thk.50-60 micron

Lab work table with bottle rack both side usable, Size- W:1200mm x D:1200mm x Ht:900mm.The
frame made of MS cold rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and
horizontal tie member made of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black
granite supported on fibber cement board 10 mm thk. Bottle Rack Structure over all size: Width-
1000mm x Height- 600mm x Depth-300mm, Made up of prime quality MS cold rolled close annealed
Lab Table With
sheet 0.8mm thk 3 fold press form side panel with dia 9mm holes in each panel throughout the height
रु 85,500
Bottle Rack (Both
152 at 25mm pitch for adjustability of shelves. Bottom storage over all size-w-1150mm xHt 845mm
Side Unit)
xD450mm.made up of Prime quality MS cold rolled close annealed sheet 0.8mm thk. One adjustable
1200x1200x900
self creating two compartment. Doors with top hung sliding mechanism, slides on PVC rollers. Lock
Ebco/Doorset. Handles die cast PVC. SDU mounted on heavy duty brack castors of superior quality
make. Provision for two Gas Burner, one in each side With connection. Light and other arrangements
are optional. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface. Powder coating thk.50-60 micron.

Lab work table with bottle rack both side usable, Size-W:600mmxD:1200mmxHt:900mm.The
frame made of MS cold rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and
horizontal tie member made of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black
granite supported on fibber cement board 10 mm thk. Bottle Rack Structure over all size: Width-
500mm x Height- 600mm x Depth-300mm, Made up of prime quality MS cold rolled close annealed
Lab Table With
sheet 0.8mm thk 3 fold press form side panel with dia 9mm holes in each panel throughout the height
रु 64,500
Bottle Rack (Both
153 at 25mm pitch for adjustability of shelves. Bottom storage over all size-w-550mm xHt 845mm
Side Unit)
xD450mm.made up of Prime quality MS cold rolled close annealed sheet 0.8mm thk. One adjustable
600x1200x900
self creating two compartment. Doors with top hung sliding mechanism, slides on PVC rollers. Lock
Ebco/Doorset. Handles die cast PVC. SDU mounted on heavy duty brack castors of superior quality
make. Provision for two Gas Burner, one in each side With connection. Light and other arrangements
are optional. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface. Powder coating thk.50-60 micron.

Lab side table of size:-W/L:1200mmxHt:900mmxD:450mm: Made up of Prime quality MS cold rolled

close annealed sheet 0.8mm thk. One adjustable self creating two compartment. Doors with top hung
रु 34,000
End SDU (for sliding mechanism, slides on PVC rollers. Lock Ebco/Doorset. Handles die cast PVC. SDU mounted on
154
Both Side unit) heavy duty brake castors of superior quality make. The top made of black granite 17mm thk and bottom
support on fibber cement board 10mm thk. All steel components are epoxy powder coated followed by
seven tanks anti corrosion treatment of surface. Powder coating thk 50-60 micron.

Lab table one side usable of size- W:600mm x D:600mm x Ht:900mm. The frame made of MS cold
rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and horizontal tie member made
of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black granite supported on fibber
रु 35,000
Sink table Single
155 cement board 10 mm thk. The door made of press formed cold rolled close annealed sheet fitted with
Side
cylindrical hinge with provision to hang the door with frame. The sink made of Ceramic or Stainless steel
1mm thk and tap made of stainless steel. All steel components are epoxy powder coated after seven
tanks anti corrosion treatment of surface. Powder coating thk.50-60 micron

Lab work table with bottle rack single side usable, Size-W:1200mm x D:600mm x Ht:900mm.The
frame made of MS cold rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and
horizontal tie member made of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black
granite supported on fibber cement board 10mm thk. Bottle Rack Structure over all size: Width-
1000mm x Height- 600mm x Depth-150mm: Made up of prime quality MS cold rolled close annealed
Lab Table With sheet 0.8mm thk 3 fold press form side panel with dia 9mm holes in each panel throughout the height
156 Bottle Rack at 25mm pitch for adjustability of shelves. Bottom storage over all size- w-1150mm x Ht 845mm x रु 65,000
(Single Side Unit) D450mm.made up of Prime quality MS cold rolled close annealed sheet 0.8mm thk. One adjustable
self creating two compartment. Doors with top hung sliding mechanism, slides on PVC rollers. Lock
Ebco/Doorset. Handles die cast PVC. SDU mounted on heavy duty brack castors of zipco make.
Provision for one Gas Burner with connection. Light and other arrangements are optional. All steel
components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
Powder coating thk.50-60 micron.

Size :- W:600mmxD:600mmxHt:900mm.
The frame made of MS cold rolled close annealed tube, vertical leg made of 25x25x18G(1.2mm), and
157 Lab Corner Table horizontal tie member made of 25x50x18G(1.2mm). Top made of black granite 17mm thk and black रु 15,000
granite supported on fibber cement board 10 mm thk. All steel components are epoxy powder coated
after seven tanks anti corrosion treatment of surface. Powder coating thk.50-60 micron

Size:- length: 1950mm, Width: 900mm, Height:450mm

Made out of prime quality cold rolled close annealed sheet & Tubes. Body parts made out of prime
quality 0.8mm thk. press form cold rolled close annealed sheet. Use only MIG/TIG & Spot Welding for
रु 31,500
Hostel bed With
158 fabrication. Provision of drawers as per requirement, drawer move on heavy duty ball bearing type roller
Storage-
channel. Top of the Bed made of 12mm thick plywood. All steel components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 15 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- length:1980mm, Width: 910mm,Sleeping H:450mm,and second person sleeping

height:1770mm, Made out of prime quality cold rolled closed annealed sheet & Tubes. Horizontal
frame made out of prime quality 1.0mm thick. Press form cold rolled close annealed sheet. Vertical
frame made out of prime quality cold rolled closed annealed tube dia 38x1.6mm thick. Only MIG/TIG
159 Bunk Bed and spot welding for fabrication. Two storage box of 900Wx800Dx312H provided on bed with proper रु 38,000
piano hinges attachment. Top of bed is 18mm thick Ply and box bottom ply is 12mm thick. The metres
size will be 1900Lx850Wx100thick for bed. All steel components are epoxy powder coated followed by
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- length:1950mm, Width: 900mm, Height:450mm, Made out of prime quality cold rolled close
annealed sheet & Tubes. Body parts made out of prime quality 0.8mm thk. press form cold rolled close
annealed sheet. Use only MIG/TIG & Spot Welding for fabrication. One drawer of 3' width and 3' depth
रु 19,925
Hostel bed With
160 provided on wheels attached from Bed with proper attachment. Top of Bed is MS cold rolled close
Storage
annealed Sheet. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- length:1950mm, Width: 900mm, Height:400mm, Made out of prime quality cold rolled close
annealed sheet & Tubes. Body parts made out of prime quality 0.8mm thk. press form cold rolled close
रु 10,675
annealed sheet. Use only MIG/TIG & Spot Welding for fabrication. Headrest & footrest made out of 32
161 Steel bed
round 1.2mmCRCA Tube. Top of Bed is MS cold rolled close annealed Sheet. All steel components are
epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Bed side table Length:450, Width:450, Height:550 mm. Body parts made out of prime quality 0.8mm
thk. press form cold rolled close annealed sheet. Use only MIG/TIG & Spot. Top made of 18mm thick
pre-laminated particle board. Side Edges covered with PVC edge bend on machine. Drawer Slides on
162 Bed Side locker roller slides for free movement. Ebco/ Doorset make locks. Drawer handles would be inbuilt self रु 7,650
bended. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- Length:900mm, Width: 600mm, table top Height 750mm, total height : 1980mm Top made
by 18mm thk. Particle board. Body parts made out of prime quality 0.8mm thk. Press form cold rolled
close annealed sheet & Tubes. Use only MIG/TIG & Spot welding for fabrication. Dotted embossed steel
रु 29,500
BT-Study Table -
163 modesty panel and single drawer provided below table top. Provision made for modular cable duct for
DX
electric cables. Soft board & marker board at front. All steel components are epoxy powder coated
followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- height:1980mm, width:910mm depth:550mm, All Body part made-up of prime quality cold
rolled close annealed Sheet 0.8mm thick, doors 1mm thick. Use only MIG/TIG & Spot welding for
रु 29,325
fabrication. provision of 1 adjustable shelf and 2 Drawer. Three way locking device with six levers
164 Hostel Almira
superior quality lock for Door. Doors are mounted on pin type MS hinges. All steel components are
epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-height:1980mm, width:910mm depth:550mm, All Body part made-up of prime quality cold
rolled close annealed Sheet 0.8mm thick, doors 1mm thick. Use only MIG/TIG & Spot welding for
fabrication. Vertically divided into two parts with provision of two separate doors, provided with 1
165 BT-DA-78 adjustable shelf and 1 Drawer in each compartment. Three way locking device with six levers superior रु 32,650
quality lock for Door. Doors are mounted on pin type MS hinges. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:-height:1980mm, width:610mm depth:550mm, All Body part made-up of prime quality cold
rolled close annealed Sheet 0.8mm thick, doors 1mm thick. Use only MIG/TIG & Spot welding for
रु 20,175
fabrication. provision of 1 adjustable shelf and 1 Drawer. Three way locking device with six levers
166 BT-SA-78
superior quality lock for Door. Doors are mounted on pin type MS hinges. All steel components are
epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- L-2130mmx D-915mmxHt-750mm: Under structure made of prime quality cold rolled close
annealed square tube 30mm x 30mm x 1.2mm thk. with 8 nos. folding/tilting stools 4 on each side.
BT-CT-8-SS Stools fitted on specially designed C-clamps over leg rest on each side with Bush for smooth
Canteen Table functioning.
167 with S.S. Top 8 Top-1.0mm thk. stainless-steel properly bent & edge-formed, supported with 12mm Ply/PLPB below top. रु 41,725
seated with Stool Top made up of 1.0 mm thk. stainless steel dia 300mm, supported on 12mm Ply/PLPB fitted with
foldable Stool CSK screw on 25mmx3 mm thk. MS flat welded on stool frame. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- L-1065 mmx D-915mmxHt-750mm. Under structure made of prime quality cold rolled close
annealed square tube 30mm x 30mm x 1.2mm thk. with 4 nos. folding/tilting stools 2 on each side.
BT-CT-4-SS Stools fitted on specially designed C-clamps over leg rest on each side with Bush for smooth
Canteen Table functioning.
168 with S.S. Top 4 Top-1.0mm thk. stainless-steel properly bent & edge-formed, supported with 12mm Ply below top. Stool रु 29,500
seated with Top made up of 1.0 mm thk. stainless steel dia 300mm, supported on 12mm Ply/PLPB fitted with CSK
foldable Stool screw on 25mmx3 mm thk. MS flat welded on stool frame. All steel components are epoxy powder
coated followed by seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Page 16 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size:- L-2130mmx D-915mmx Ht-750mm

Under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm
रु 28,675
BT-CT-8-SS Top thk. Both side foot-rests provided in the table. Top-1.0mm thk. stainless-steel properly bent & edge-
169
without stool formed, supported with 12mm Ply below top. All steel components are epoxy powder coated followed by
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- L-2130mmx D-305mmx Ht-450mm

Under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm
रु 12,325
thk. with foot-rest provided. Bench top-1.0mm thk. stainless-steel properly bent & edge-formed,
170 Bench
supported with 12mm Ply below top. All steel components are epoxy powder coated followed by seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Over all size:- L-1065mmx D-915mmxHt-750mm.

Under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm
रु 20,325
BT-CT-4-SS top thk. Both side foot-rests provided in the table. Top-1.0mm thk. stainless-steel properly bent & edge-
171
without stool formed, supported with 12mm Ply below top. All steel components are epoxy powder coated followed by
seven tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Size:- L-1065mmx D-305mmx Ht-450mm

Under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm
रु 8,375
thk with foot-rest provided. Bench top-1.0mm thk. stainless-steel properly bent & edge-formed,
172 Bench
supported with 12mm Ply below top. All steel components are epoxy powder coated followed by seven
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.

Overall Size : Width :430mm , Depth:558mm , Height: 860mm, Seat Height:475mm :

173 BT- CTC -2 Made of MS CRCA Tube Dia. 25 x 18 gauge with back rest tube of Ø 9.5mm, duly Chrome Plated. Seat रु 4,125
made of Ply 12mm With Cushion.

Size: Height Overall/Seat - Max:1240/535mm, Min: 1160/455mm, Depth - 625mm, Width- 650mm :
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism
174 Executive Hi Back.
and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density
20775
PU cushion.
Over all appearance of product as shown in picture.
Available in only Black Latherite.

Size: Height Overall/Seat - Max:1105/510mm, Min: 1020/440mm, Depth - 660mm, Width- 660mm :
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
रु 18,550
Executive Low and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism
175
Back. and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density
PU cushion.
Over all appearance of product as shown in picture.
Available in only Black Latherite.
Size: Height Overall/Seat - Max:1240/535mm, Min: 1160/455mm, Depth - 625mm, Width- 650mm :
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
रु 21,325
and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism
176 UE High back
and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density
PU cushion.
Over all appearance of product as shown in picture.
Available in only Black Latherite.
Size: Height Overall/Seat - Max:1105/510mm, Min: 1020/440mm, Depth - 660mm, Width- 660mm :
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
रु 17,625
and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism
177 UE Low Back
and with Single piece die castes PP arm rest. Quality Latherite tapestry with double stitch. High density
PU cushion.
Over all appearance of product as shown in picture.
Available in only Black Latherite.
Size: Height Overall/Seat - 1080/480mm, Depth - 630mm, Width- 660mm : Under Structure
cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-
Nuts for rigid fastening. Single piece die castes PP arm rest. Quality Latherite tapestry with double
178 U.E.Visitor stitch. High density PU cushion. All steel components should be epoxy powder coated followed by seven रु 15,750
tanks anti corrosion treatment of surface.
The overall appearance of the product shall be as per photograph.
Available in only Black Latherite.

Size: Total Height-1050-1150mm, Depth 600mm, Width-535mm Seat Height:420-520mm.

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
179 Chair Ergo HI-back and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism रु 8,750
and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High
density Moulded PU cushion. Upholstery 2.0 Mtr
Over all appearance of product as shown in picture.

Page 17 of 48
Sr.
Product Detail Photograph Specification Price
No.

Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm.
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support
रु 7,600
Chair Ergo Low
180 and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism
back
and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High
density Moulded PU cushion. Upholstery 1.5 Mtr
Over all appearance of product as shown in picture.

Size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm.

Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood
रु 6,375
with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High
181 Chair Ergo Visitor
density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks
anti corrosion treatment of surface. Upholstery 1.5 Mtr
The overall appearance of the product shall be as per photograph.

Size: Total Height-1070-1190mm, Depth 685mm, Width-590mm Seat Height:425-510mm.

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
रु 10,100
Chair Premium
182 steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel
Ergo HI-back
column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality
tapestry. High density Moulded PU cushion. Upholstery 1.5 Mtr.
Over all appearance of product as shown in picture.

Size: Total Height-810-895mm, Depth 685mm, Width-555mm Seat Height:425-510mm.

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
रु 8,950
Chair Premium
183 steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel
Ergo Low back
column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality
tapestry. High density Moulded PU cushion. Upholstery 1.2 Mtr.
Over all appearance of product as shown in picture.

Size: Total Height-840mm, Depth 600mm, Width-575mm Seat Height:450mm.

Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood
रु 7,725
Chair Premium with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. Seat and
184
Ergo Visitor back covered with PP covers. High density PU moulded cushion. All steel components are epoxy
powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.2 Mtr
The overall appearance of the product shall be as per photograph.

Size: Over all H: 1000-1100mm, Seat H: 460-560mm, D: 625mm, W: 580mm,

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
185 Chair Rudy - L steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel रु 7,075
column. Lockable centre tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
High density Moulded PU cushion. Upholstery 0.85 Mtr.
Over all appearance of product as shown in picture.

Size:- H: 910-1010mm, Seat H: 470-570mm, D: 575mm, W: 580mm :

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
186 Chair Rudy - M steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel रु 6,375
column. Lockable centre tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
High density Moulded PU cushion. Tapestry 0.75 Mtr.
Over all appearance of product as shown in picture.

Size:- H: 785-885mm, Seat H: 390-470mm, D: 480mm, W: 550mm :

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
रु 5,925
Revolving Chair
187 steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel
Rudy - Small
column. Lockable centre tilt mechanism and with Single piece Die castes PP arm rest. Quality tapestry.
High density Moulded PU cushion. Tapestry 0.75 Mtr.
Over all appearance of product as shown in picture.

Size- H: 1230-1330mm, Seat H: 500-600mm, D-550mm, W-630mm.

5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot
pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is glass filled Nylon fitted
रु 21,325
Mesh High back with Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic
188
Chair ABS cover over steel column. Five position Lockable synchrony tilt mechanism, with Single piece die
castes PP arm rest adjustable with PU pad. Quality tapestry. High density Moulded PU cushion.
Upholstery 0.85 Mtr.
Over all appearance of product as shown in picture.
Specification-Size-H:1000-1100mm, Seat ht: 460-560mm, D-600mm, W-590 mm.
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot
pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with
रु 7,500
Mesh Low Back stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment.
189
Chair Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die
castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion.
Upholstery 0.50 Mtr.
Over all appearance of product as shown in picture.

Size: Total Height - 760-860mm, Depth- 525mm & Width 440 Seat Height: 390-480.
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
रु 4,775
Chair Mona With
190 steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel
Handle
column. Back connected with Steel tube. Single piece Die castes PP arm rest. Quality tapestry. High
density Moulded PU cushion. Upholstery 0.75 Mtr.
Over all appearance of product as shown in picture.

Page 18 of 48
Sr.
Product Detail Photograph Specification Price
No.
Size: Total Height - 760-860mm, Depth- 525mm & Width 440 Seat Height: 390-480.
5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy
रु 4,550
Chair Mona
191 steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel
Without Handle
column. Back connected with Steel tube. Quality tapestry. High density Moulded PU cushion.
Upholstery 0.75 Mtr.
Over all appearance of product as shown in picture.
Size: Total Height-860mm, Width 400mm, Depth-500mm,Seat Height-450mm
रु 2,550
Class Room Chair- Under structure made out of MS cold rolled close annealed tube19mmx1.25mm thick. Fitted with 12 mm
192
Wooden shell thick 11 ply moulded ply wood shell. Steel components are epoxy powder coated followed by seven
tanks anti corrosion pre-treatment of surface. Or Chrome plated.

Size: Total H - 820/920, W - 430, D - 600, Seat H - 400/500

Wooden Shell 12mm thick made of 11 core moulded ply fitted on 2mm Press formed MS plate with
Computer Chair
रु 4,550
lever to operate gas pump. Sturdy steel column gas lift for centre support and seat height adjustment.
193 Wooden Shall with
Telescopic ABS cover over steel column. 5- Prong, nylon- base for stability . Twin- wheel heavy-duty
cushion
castors to provide easy mobility under load.
Overall appearance of Chair as per photograph.

Size: Overall Height - 860mm, Depth - 480mm & Width 600mm. Under Structure made of 25mm dia
MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of
रु 4,675
Chair N-Type With surface. Fitted with moulded PU arm rest. Seat and back are made of 12mm thick Hot pressed ply wood
194
Handle with high density PU foam, upholstered with fine quality fabric. Steel components are epoxy powder
coated followed by seven tanks anti corrosion pre-treatment of surface. Upholstery 0.75 Mtr.
Overall appearance as per photograph.

Size: Total Height - 860mm, Depth - 550mm & Width 440mm: Under Structure made of 19mm dia
MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of
surface. Seat and back are made of 12mm thick Hot pressed ply wood with high density PU foam,
रु 3,275
Chair N-Type
195 upholstered with fine quality fabric. Steel components are epoxy powder coated followed by seven tanks
Without Handle
anti corrosion pre-treatment of surface.
Upholstery 0.75 Mtr.
Overall appearance as per photograph.
Size:-Overall H: 830mm,Seat h: 460mm,D: 580mm,W: 535mm: Under Structure made of 19mm dia
MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of
रु 2,825
surface. Seat and back are made of 12mm thick Hot pressed ply wood with high density PU foam,
196 Chair Scandy
upholstered with fine quality fabric. Arms Tubular. Steel components are epoxy powder coated followed
by seven tanks anti corrosion pre-treatment of surface. Upholstery 0.6 Mtr.
Overall appearance as per photograph.

Size:-Overall H: 830mm,Seat h: 460mm,D: 530mm,W: 560mm: Back polypropylene material. Seat

cut foam with tapestry. Frame oval tube 13x31-16 Gauge, Under Structure made of MS cold rolled
रु 2,825
Chair Prisma
197 close annealed capsule pipe frame 1.2 mm thick, duly powder coated after anti corrosion treatment of
Without Handle
surface. Seat are made of 12mm thick Hot pressed ply wood with high density PU foam, Back rest -PP
seat with upholstered with fine quality fabric. With powder coated.
Size:-Overall H: 900mm,Seat h: 460mm,D: 580mm,W: 535mm: Under Structure made of 19mm dia
MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of
surface. Seat is made of 12mm thick Hot pressed ply wood with high density PU foam, upholstered with
रु 3,275
Chair Scandy
198 fine quality fabric. Back made of MS moulded Bar fitted with Nylon mesh. Arms Tubular. Steel
Mesh
components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface.
Upholstery 0.4 Mtr.
Overall appearance as per photograph.
Size: Height: 890mm,Depth: 560mm Width: 530mm: Under structure made of 1"x16gauge MS cold
rolled close annealed tube with insert bent at appropriate angle for seating comfort. Seat and back
199 SA Cane made of 22mm teak wood, canned with 2 mm half round plastics-cane. Armrest are PU types. Steel रु 5,125
components are epoxy powder coated followed by seven tanks anti corrosion pre-treatment of surface.
Overall appearance as per Photograph.

Size: Height: 880mm,Depth: 560mm Width:450mm: Under structure made of 1"x16gauge MS cold
rolled close annealed tube with insert bent at appropriate angle for seating comfort. Seat and back
200 SWA-CANE made of 25mm teak wood, canned with 2 mm half round plastics-cane. Steel components are epoxy रु 3,675
powder coated followed by seven tanks anti corrosion pre-treatment of surface.
Overall appearance as per Photograph.

size:W-410mm, D-530mm, Seat Height-450mm, Total Height-790mm: Under structure made of 19mm
dia, 1.2 mm thick MS cold rolled close annealed tube moulded as per design, Seat & back made of hot
रु 2,700
Chair Slick without press ply 12mm thick 11 core veneer faced moulded plywood. Ply fitted to structure with steel inserts
201
arm with fasteners. All steel components are epoxy powder coated followed by seven tanks anti corrosion
treatment of surface.
Over all appearance as per Photograph.

SIZE: Height: 810mm, Depth: 570mm, Width: 505mm: Perforated Steel Seat and back fixed through
रु 2,550
Chair Visch-PS -A neat welding with MS cold rolled close annealed tube structure 1.2 mm thick with Arms. All steel
202
( With arm ) components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
Over all appearance as per Photograph.

SIZE: Height: 810mm, Depth: 570mm, Width: 445mm: Perforated Steel Seat and back fixed through
Chair Visch-PS -
रु 2,225
neat welding with MS cold rolled close annealed tube structure 1.2 mm thick. All steel components are
203 WA
epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
(without arm )
Over all appearance as per Photograph.

Page 19 of 48
Sr.
Product Detail Photograph Specification Price
No.

Over all sizes- 1700mm X 620mm X 850mm (L X W X H). 3- Seater visitor bench with 3 individual
seats of 450 mm. width. Perforated steel seat and back will be fixed into individual steel frames,
mounted on steel- pedestal. Thickness of perforated steel seat & back 1.0 mm. The individual seat
frames will be made of steel pipe of dia 19 mm.The back will be properly curved for back- support. The
Seat will have water- fall curve on the front. Handles (6 Nos) will be made of oval- section pipe of size
204 Visben-PS 3 sitter 35 X 10 mm and suitably curved for proper arm- support. The Pedestal- beam will be made of रु 10,525
rectangular steel pipe of Size- 75 x 35 mm.x18G. The mounting brackets for fixing seats will be of 3mm.
thickness. The Pedestal beam will rest on two side pillars made of round steel pipe of size- 50 mm dia.
The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The
whole structure including seats are powder- coated.
Appearance as per attached photograph.

Over all sizes- 1115mm X 620mm X 850mm (L X W X H). 2- Seater visitor bench with 2 individual
seats of 450 mm. width. Perforated steel seat and back will be fixed into individual steel frames,
mounted on steel- pedestal. Thickness of perforated steel seat & back 1.0 mm. The individual seat
frames will be made of steel pipe of dia 19 mm. The back will be properly curved for back- support. The
Seat will have water- fall curve on the front. Handles (4 Nos) will be made of oval- section pipe of size
205 Visben-PS 2 sitter 35 X 10 mm and suitably curved for proper arm- support. The Pedestal- beam will be made of रु 7,100
rectangular steel pipe of Size- 75 x 35 mm.x18G. The mounting brackets for fixing seats will be of 3mm.
thickness. The Pedestal beam will rest on two side pillars made of round steel pipe of size- 50 mm dia.
The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The
whole structure including seats are powder- coated.
Appearance as per photograph.

Size: Total length: 1800mm, Total Height: 750 mm, Total Depth: 630 mm and Seat height: 410mm.
Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get
रु 12,500
Premium Visitor proper finish. Chrome plated Handles & BASE. Steel perforated MS moulded one piece seat and back
206
Chair 3 Seater fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x
35mm. seat and bottom support are Powder coated.
Over all appearance as per Photograph.

Size: Total length: 1200mm, Total Height: 750 mm, Total Depth: 630 mm and Seat height: 410mm.
Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get
रु 11,050
Premium Visitor proper finish. Chrome plated Handles & BASE. Steel perforated MS moulded one piece seat and back
207
Chair 2 Seater fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x
35mm. seat and bottom support are Powder coated.
Over all appearance as per Photograph.

Size: Height: 830mm, Seat height: 460mm, Tablet Height: 665mm, Depth: 580mm, Width: 535mm.
Under Structure made of 18mm dia 1.2mm thick MS cold rolled close annealed tube, fitted with
रु 4,100
Chair Scandy
208 Upholstered seat and back made from 12mm Hot press ply with high density foam. Tablet made of
Tablet (Half Tablet)
18mm thick Pre-laminated Particle Board. Tapestry 0.6 Mtr
Overall appearance of Chair as shown in picture.

Size: Height: 830mm, Seat height: 460mm, Tablet Height: 665mm, Depth: 580mm, Width: 535mm.
Under Structure made of 18mm dia 1.2mm thick MS cold rolled close annealed tube, fitted with
रु 4,775
Chair Scandy
209 Upholstered seat and back made from 12mm Hot press ply with high density foam. Tablet made of
Tablet (Full Tablet)
18mm thick Pre-laminated Particle Board. Tapestry - 0.6 Mtr
Overall appearance of Chair as shown in picture.
Size: Total Height-850mm, Seat Height: 440mm, Tablet Height: 665mm, Depth 270mm &
Width:550mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality
रु 8,375
Chair Ergo-Tab tapestry. High density PU moulded cushion. Book rack made of plastic coated wire mesh fitted at
210
With (Full Tablet) bottom of seat and tablet made of 18mm thick Pre-laminated Particle Board. All steel components are
epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5
Meter
The overall appearance of the product shall be as per photograph.
Size: Total Height-850mm, Seat Height: 440mm, Tablet Height: 665mm, Depth 600mm &
Width:550mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot
pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality
रु 7,775
Chair Ergo-Tab tapestry. High density PU moulded cushion. Book rack made of plastic coated wire mesh fitted at
211
(With Half Tablet) bottom of seat and tablet made of 18mm thick Pre-laminated Particle Board. All steel components are
epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5
Meter
The overall appearance of the product shall be as per photograph.

Size-Total ht-860mm, Seat ht-450mm, Tablet ht-680mm, Depth-500mm, Width-480mm. Tubular

Under Structure made by dia 19 mm x 18g MS cold rolled close annealed round tube. Frame is powder
रु 3,625
Wooden Shell
212 coated after seven tank surface treatment or chrome plated fitted with Moulded ply wood 12mm/11 ply
Chair-With tablet
hot press veneer faced in required design. Tablet also in same material and finish as shell.
Overall appearance as per photograph.

520mm wide steel perforated steel seat & back of thickness 1.20 mm thick. Mounded in steel tubular
Structure as shown in picture. Mounted on Steel Pedestal of 75 mm Ø, 1.25mm thickness .Mounted on
Press formed MS cold rolled close annealed Leg of 1.6 mm thickness, top Bracket also made of MS
Steel Perforated cold rolled close annealed Press formed Part on which seat is duly Mounted -every individual Chair
213 Chair with Mounted on Common handle. Overall appearance of Product as shown in picture. Note: Floor must be रु 4,450
Pedestal minimum 100mm thick RCC slab to grout the chairs or otherwise written confirmation on deviation
should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Page 20 of 48
Sr.
Product Detail Photograph Specification Price
No.

Centre to centre distance 530mm.Size: Height: 850mm, Seat Height: 470mm, Depth: 560mm & Width:
560mm. Under Structure made of 75mm dia 1.2mm thick MS cold rolled close annealed tube welded to
MS cold rolled close annealed 1.6mm press formed pedestal for better grip and with provision to be
grouted at floor. Upholstered seat and back made of Hot pressed ply wood with steel T-Nuts for rigid
Ergo with Pedestal fastening. Single piece integral skin PU arm rest common for every alternate Chair. Quality tapestry.
214 (LBF) Without High density PU moulded cushion. All steel components are epoxy powder coated followed by seven रु 6,475
Tablet tanks anti corrosion treatment of surface. The overall appearance of the product are as per photograph.
Upholstery 1.5 Mtr Note: Floor must be minimum 100mm thick RCC slab to grout the chairs or
otherwise written confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Centre to centre distance 560mm.Size: Height: 850mm, Seat Height: 470mm, Depth: 560mm & Width:
610mm. Under Structure made of 75mm dia 1.2mm thick MS cold rolled close annealed tube welded to
MS cold rolled close annealed 1.6mm press formed pedestal for better grip and with provision to be
grouted at floor. Upholstered seat and back made of Hot pressed ply wood with steel T-Nuts for rigid
fastening. Arm rest made of teak wood fitted on MS cold rolled close annealed sheet box and press
Ergo with Pedestal formed rotating lever specially design to accommodate writing tablet. Quality tapestry. High density PU
215 (LBF) with Half moulded cushion. Writing tablet made of 18mm thick Pre-laminated Particle Board. All steel रु 7,700
Tablet components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The
overall appearance of the product are as per photograph. Upholstery 1.5 Mtr Note: Floor must be
minimum 100mm thick RCC slab to grout the chairs or otherwise written confirmation on deviation
should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Centre to centre distance 560mm.Size: Total Height: 980mm, Seat Height: 460mm, Depth:
800mm, Width: 560mm.
• Fixed Backrest
• Auto tip up cushion.
• Seat sizes available from CTC 21" to 24"
• 2mm thick PP injection moulded cushion and 3mm back cover.
• Cushion housing with acoustical perforation.
• Armrest PPCP with cup-holder duly injection moulded / PU waterfall Armrest / Polished wooden
Armrest.
रु 10,300
Champion Fixed
216 Fix chair with auto tip up feature. PPCP injection moulded housing for cushion & backrest. Moulded
with Stunner tray
flame resistant & CFC free PU foam. Integral skin moulded armrest/PPCP cup holder Enough thigh and
backrest support with wider seating area. All exposed sheet
metal parts are powder coated. All fasteners are zinc coated.
Usage of anchor-fasteners with high bonding grouting material.
Chair structure is made In combination of erw pipe & sheet metal.
Back/cushion is made up of polyurethane foam (P.U.) with density of 50±5 kg/m. Side light arrangement
on aisle seats for easy traceability of rows/seats .
Seat sr. Numbering on chair cushion & backrest.
Cloth-60" W-1.15 Mtr.
Centre to centre distance 560mm.Size: Total Height: 980mm, Seat Height: 460mm, Depth:
800mm, Width: 560mm.
• Fixed Backrest
• Auto tip up cushion.
• Seat sizes available from CTC 21" to 24"
• 5mm thick PP injection moulded cushion and 3mm back cover.
• Cushion housing with acoustical perforation.
• Armrest PPCP with cup-holder duly injection moulded / PU waterfall Armrest / Polished wooden
Armrest.
रु 10,875
Audi. Chair-
217 Fix chair with auto tip up feature. PPCP injection moulded housing for cushion & backrest. Moulded
Champion
flame resistant & CFC free PU foam. Integral skin moulded armrest/PPCP cup holder
Enough thigh and backrest support with wider seating area. All exposed sheet metal parts are powder
coated. All fasteners are zinc coated.
Usage of anchor-fasteners with high bonding grouting material. Chair structure is made In combination
of erw pipe & sheet metal.
Back/cushion is made up of polyurethane foam (P.U.) with density of 50±5 kg/m. Side light arrangement
on aisle seats for easy traceability of rows/seats .
Seat sr. Numbering on chair cushion & backrest.
Cloth-60" W-1.15 Mtr.

Centre to centre distance 560mm.Size: Total Height: 1050mm, Seat Height: 460mm, tablet H-570,
Depth: 750mm ( Normal), After push back 925mm, with tablet 1025mm, Width: 560mm.
• Push Back reclining / Fixed Back rest.
• Auto tip up cushion.
• Seat sizes available from Centre to Centre 21" to 24"
• PP injection moulded cushion and back cover.
• Cushion housing with acoustical perforation
रु 14,675
Audi Scholar With
218 • Armrest polished wooden / PU
Writing Pad
• Wooden writing tablet with black membrane polish / laminated. Pushback/with fixed auto tip up
feature. PPCP injection moulded housing for cushion & backrest.
Moulded flame resistant & CFC free PU foam. Integral skin moulded armrest with cup holder. Enough
thigh and backrest support with wider seating area. All exposed sheet metal parts are powder coated.
All fasteners are zinc coated. Usage of anchor-fasteners with high bonding grouting material. Seat sr.
Numbering on chair cushion. Chair structure is made In combination of erw pipe & sheet metal.
Back/cushion is made up of polyurethane foam {P.U.) with density of 50±5 kg/m. Cloth-60" W-1.20Mtr.

Page 21 of 48
Sr.
Product Detail Photograph Specification Price
No.

Centre to centre distance 560mm.Size: Total Height: 1050mm, Seat Height: 460mm, Depth:
750mm ( Normal), After Push back 925mm, Width: 560mm.
• Push back reclining fixed back rest
• Auto tip up cushion.
• Seat sizes available from ere 21 to 24"
• PP injection moulded cushion and back cover.
रु 12,300
Stunner Push • Cushion housing with acoustical perforation.
219
Back • Armrest PPCP with cup-holder duly injection moulded and OR fabric upholstered PU form insert at
hand resting portion , Push back with/fixed with auto tip up. PPCP injection moulded housing for back &
seat cushion. Moulded flame resistance & CFC free PU foam-density of 50 ± 5kg/m. Enough thigh and
backrest support with wider seating area. All exposed sheet metal parts are powder coated. All
fasteners are zinc coated. Usage of anchor-fasteners with high bonding grouting material. Chair
structure is made in combination of erw pipe & sheet metal. Sidelight arrangement on aisle side for easy
traceability of rows/seats. Seat sr. Numbering on chair cushion. Cloth-60" W-1.30 Mtr.

Centre to centre distance 560mm.Size: Total Height: 1050mm, Seat Height: 460mm, Depth:
750mm ( Normal), After Push back 925mm, Width: 560mm.
• Push Back reclining/Axed Backrest
• Auto tip up cushion.
• Seat sizes available from ere 21" to 24".
• PP injection moulded cushion and back cover.
• Cushion housing with acoustical perforation
220 Leisure Push Back • Armrest with integral cup-holder duly injection moulded, with an integral skinned PU Form moulded रु 12,475
QR fabric upholstered PU form insert at hand resting portion / PU waterfall Armrest. Pushback with auto
tip up feature. PPCP injection moulded housing for cushion & backrest. Moulded flame resistant & CFC
free PU foam. Integral skin moulded armrest with cup holder. Enough thigh and backrest support with
wider seating area. All exposed sheet metal parts are powder coated. All fasteners are zinc coated.
Usage of anchor-fasteners with high bonding grouting material. Seat sr. Numbering on chair cushion.
Chair structure is made In combination of erw pipe & sheet metal. Back/cushion is made up of
polyurethane foam {P.U.) with density of 50±5 kg/m. Cloth-60" W-1.20 Mtr.

Centre to centre distance 560mm.Size: Height: 1050mm, Seat Height: 470mm, Depth: 750mm (
Normal), After Push back 925mm & Width: 560mm.
• Push Back reclining with wider headrest.
• Auto tip up cushion.
• Seat sizes available from CTC 21" to 24"
• PP injection moulded cushion and back cover.
• Cushion housing with acoustical perforation
रु 13,750
Cine Deluxe With • Armrest with integral cup-holder duly injection moulded and with an integral skinned PU Form moulded
221
Head Rest OR fabric upholstered PU form insert at hand resting portion. Pushback with auto tip up feature.
PPCP injection moulded housing for cushion & backrest. Moulded flame resistant & CFC free PU foam.
Integral skin moulded armrest with cup holder. Enough thigh and backrest support with wider seating
area. All exposed sheet metal parts are powder coated. All fasteners are zinc coated. Usage of anchor-
fasteners with high bonding grouting material. Seat sr. Numbering on chair cushion. Chair structure is
made In combination of erw pipe & sheet metal. Back/cushion is made up of polyurethane foam {P.U.)
with density of 50±5 kg/m. Side light arrangement on aisle seats for easy traceability of rows/seats.
Cloth 60" W-1.55 Mtr.

Centre to centre distance 560mm.Size: Height: 900mm, Seat Height: 470mm, Depth: 750mm (
Normal), After Push back 925mm & Width: 560mm.
• Push Back reclining without Headrest.
• Auto tip up cushion.
• Seat sizes available from CTC 21" to 24"
• PP injection moulded cushion and back cover.
• Cushion housing with acoustical perforation
रु 12,475
Cine Deluxe • Armrest with integral cup-holder duly injection moulded and with an integral skinned PU Form moulded
222
Without Head Rest OR fabric upholstered PU form insert at hand resting portion.
Pushback with auto tip up feature. PPCP injection moulded housing for cushion & backrest. Moulded
flame resistant & CFC free PU foam. Integral skin moulded armrest with cup holder. Enough thigh and
backrest support with wider seating area. All exposed sheet metal parts are powder coated. All
fasteners are zinc coated. Usage of anchor-fasteners with high bonding grouting material. Seat sr.
Numbering on chair cushion. Chair structure is made In combination of erw pipe & sheet metal.
Back/cushion is made up of polyurethane foam {P.U.) with density of 50±5 kg/m. Side light arrangement
on aisle seats for easy traceability of rows/seats. Cloth 60" W-1.50 Mtr.

Centre to centre distance 595mm. Seat & Back: Finish with Internal structure in tubular steel. Padding in
moulded polyurethane foam. Synchronized tip- up mechanism for seat & back .Side Arm with internal
structure in pressed sheet metal and PPCP panels Covering the structure. & panel covering with fabric
रु 13,950
or Leather. Side available also with writing tablet in Medium Density PVC finish, scratches proof folding
223 BT- 900 Chair
in the side, with anti panic movement. Note: Floor must be minimum 100mm thick RCC slab to grout the
chairs or otherwise written confirmation on deviation should be taken by Bonton, as regard to floor.
Steps depth must be as per layout – deviations must be discussed with Bonton and written consent of
Bonton is must in this regard before placing the order.

Specification- Size-H-870 mm, L-1940 mm, D-840 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
224 Sofa 3Seater-cs-23 premium quality PU cloth with help of stitching, where ever necessary. रु 26,500
Tapestry- 06 Mtr.
Overall appearance as per photograph.
Page 22 of 48
Sr.
Product Detail Photograph Specification Price
No.
Specification- Size-H-870 mm, L-1450 mm, D-840 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
रु 21,400
Sofa 2 Seated cs-
225 premium quality PU cloth with help of stitching, where ever necessary.
23
Tapestry - 05 Mtr
Overall appearance as per photograph.
Specification- Size-H-870 mm, L-925 mm, D-840 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
रु 13,250
Sofa Signal seated
226 premium quality PU cloth with help of stitching, where ever necessary.
cs-23
Tapestry- 04 Mtr
Overall appearance as per photograph.
Specification- Size-H-700 mm, L-1730 mm, D-800 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
रु 25,500
Sofa 3 Seated-
227 premium quality PU cloth with help of stitching, where ever necessary.
straight line
Tapestry- Mtr
Overall appearance as per photograph.
Specification- Size-H-700 mm, L-1290 mm, D-800 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
रु 20,375
Sofa 2 Seated-
228 premium quality PU cloth with help of stitching, where ever necessary.
straight line
Tapestry- Mtr
Overall appearance as per photograph.
Specification- Size-H-700 mm, L-735 mm, D-800 mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with
रु 12,650
Sofa 1 Seated-
229 premium quality PU cloth with help of stitching, where ever necessary.
straight line
Tapestry
Overall appearance as per photograph.
Size: Length: 600mm, Width: 600mm, Height: 450mm. Under Structure made of MS cold rolled
230 Corner Table close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Top रु 5,975
Made up from 18mm Pre-laminated Particle board/ 12mm clear float glass.

रु 5,975
Round Table Dia Round Dia.450mm.
231
450 Under Structure made of Chrome plated. Top Made up from 12mm clear float glass.

Size: Length: 900mm, Width: 600mm, Height: 450mm.

रु 9,250
Under Structure made of MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after
232 Centre Table
anti corrosion treatment of surface. Top Made up from 18mm Pre-laminated Particle board/ 12mm clear
float glass.
Overall Size: 600 x 600 x 480mm
Legs shall made out of 62x62mm teakwood section as per photo graph.
Top rail shall be mad e of 62x22mm as per photo graph.
रु 15,525
Wooden Corner
233 Top shall be made of 18mm veneer faced MDF board.
Table
Teak wood beading of 18mm shall be fitted as per approval.
Polish- PU-polish shall be done.
The overall appearance of the product shall be as per photograph.
Overall Size: 1200 x 600 x 450 mm
Legs shall made out of 7 5 x7 5 mm teal rood section as per photograph.
Top rail shal1 be ma de of 7 0x22mm as per photograph.
रु 21,275
Wooden Centre
234 Top shall be made of 18mm veneer faced MDF board.
Table
Teak wood beading of 18mm shall be fitted as per approval.
Polish- PUpolish shall be done.
The overall appearance of the product shall be as per photograph

Size : Convex Table : - 1 500 (W) x 805 (D) x 750 (H) mm (60 degree convex).The tops of the
counters shall be made of toughened glass & shal1the counter with good quality fittings.
fitted on sides of .The front metal sheet above the top shall fitted with the glass & sides so as to make
रु 20,125
Reception Convex one unit & shall be very sturdy in constructions. Both the front panels, top and bottom, of the counters
235
Table shall be made of perforated Prime CR sheet of thickness 0.7 mm. The worktops shall be made of 25mm
thick BSL particle board and side shall be of 18 mm thick BSL particle board. The worktops shall have 2
cable managers on both sides. The toughened glass shall be of 8 mm thickness.
The overall appearance of the product shall be as per photograph.

रु 17,250
Reception Convex
236 Size : Counter Riser: - I 500 (W) x 461(D) x 350 (H) mm (60 degree convex)
Counter Riser

Size : Straight Table: - 1400 (W) x 700 (D) x 750 (H) mm (180 degree convex)
The tops of the counters shall be made of toughened glass & shal1the counter with good quality fittings.
fitted on sides of .The front metal sheet above the top shall fitted with the glass & sides so as to make
रु 18,975
Reception Straight one unit & shall be very sturdy in constructions. Both the front panels, top and bottom, of the counters
237
Table shall be made of perforated Prime CR sheet of thickness 0.7 mm. The worktops shall be made of 25mm
thick BSL particle board and side shall be of 18 mm thick BSL particle board. The worktops shall have 2
cable managers on both sides. The toughened glass shall be of 8 mm thickness.
The overall appearance of the product shall be as per photograph.

Reception
238 Straight Counter Size : Extension Top: - l400(W) x 300 (D) x 350 (H) mm (180 degree convex) रु 14,675
Riser

Page 23 of 48
 Sr.
Product Detail Photograph Specification Price
No.

BT-CFTR-1200, Size :- Dia. 1200mm, H-750 thick and glass top of 12mm thick.
239 BT-CFTR-1200 Top made of 18mm thick rubber wooed top, levellers at bottom. OR Frame made of 1.2 mm thk M.S. रु 19,350
cold rolled close annealed tube Chrome plated. fitted with 18mm rubber top or Glass Top - 12mm thick.

Size: Width: 1200mm, Width: 600mm, Height: 750mm. 4 seater.

रु 17,475
BT-CFTR- Top made of 18mm thick rubber wooed top, levellers at bottom. OR Frame made of 1.2 mm thk M.S.
240
1200x600 cold rolled close annealed tube Chrome plated. fitted with 18mm rubber top or Glass Top - 12mm thick.
The Under structure of table is made Up of SS 202 tube of 1.25mm thick.

Cafeteria table without chair Dia 900mm, Height-750mm,

रु 23,000
BT-Cafeteria Table
241 Top made of 18mm thick granite top,levelers at bottom. OR Frame made of 1.2 mm thk M.S. cold
without chair
rolled close annealed tube Chrome plated. fitted with 18mm granite top or Glass Top - 12mm thick.

Cafeteria table without chair Dia 900mm, Height-1050mm,

रु 23,875
BT-Cafeteria Table
242 Top made of 18mm thick rubber wooed top,levelers at bottom. OR Frame made of 1.2 mm thk M.S.
without chair
cold rolled close annealed tube Chrome plated. fitted with 18mm rubber top or Glass Top - 12mm thick.

BT-Single Bed Overall Size- 960 x 2000 x 900

243 BT-Single Bed With out storage Made in 18 mm thick prelaminated particle board structure MS 3/4'' square pipe frame रु 30,600
power coated, with head rest.

BT-Double Bed Over all Size 1560 x 2000 x 900

244 BT-Double Bed With out Storage Made in 18 mm thick prelaminated particle board structure MS 3/4'' square pipe frame रु 52,825
power coated, with head rest.

BT-Bed Side Table Overall Size- 600mm x 450mm x 450 mm

245 BT-Bed Side Table रु 14,500
(One Drawer) Made in 18 mm thick prelaminated particle board, with single drawer with Open rack.

रु 44,900
BT-Single BT-Single Wardrobe Overall Size-900mm x 600mm x 1950mm, .
246
Wardrobe Made in 18 mm thick prelaminated particle board, with dressing glass.

रु 69,075
BT-Three Door BT-Three Door Wardrobe Overall Size-1350mm x 600 mmx 1950 mm,
247
Wardrobe Made in 18 mm thick prelaminated particle board

रु 25,050
BT-Dressing Overall Size 600mm x 450mm x1900mm,
248 BT-Dressing
Made in 18 mm thick prelaminated particle board

Terms & Conditions :

1 GST @ 18% is inclusive, However GST rates applicable at the time of dispatch will be charged ( If any change in tax rate. ).
2 Prices quoted are valid for 30 days.
3 Delivery minimum 8 to 10 weeks from the date of acceptance of your confirmed purchase order complete in all respect by us.
4 Payment @50% Mobilization Advance along with P.O & remaining @50% After delivery.
5 Installation will be charged @5% extra or Minimum Rs 5000 (where ever applicable) .
6 Prices are ex-factory, Freight will be charged extra as per actual depend on distance from Indore.
7 All tops are of Pre-laminated Particle Board. For Post form top Rs.225/- per sq.ft. will be charged extra.
8 Tapestry in use of Rs.200 per mtr. For higher range extra will be charge as per actual (if required).
Safe unloading of the goods at OR near the place of Installation is responsibility of the customer. All expenses for unloading of material at site will be borne by
9
the customer.
10 Grouting 100mm thick RCC floor is must and layout given by Bonton has to be followed strictly.
11 Bank Detail : - Oriental Bank Of Commerce, BRANCH- Sudama Nagar, Indore, A/C. NO. : 08844010000120, IFSC CODE - ORBC0100884

Page 24 of 48