Scribd
Upload
112 views1 page

Welding Wire Specifications

This document provides information on the AUTOMIG 70S-6 N solid wire for gas metal arc welding of carbon manganese steels. It is a copper-free wire suitable for high speed welding applications. The wire provides a smooth arc, low spatter, and good anti-rust properties. It is classified under AWS A5.18 and CSA W48 standards and is approved for use in construction equipment, structural steel, tanks, and other fabrication applications.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views1 page

Welding Wire Specifications

This document provides information on the AUTOMIG 70S-6 N solid wire for gas metal arc welding of carbon manganese steels. It is a copper-free wire suitable for high speed welding applications. The wire provides a smooth arc, low spatter, and good anti-rust properties. It is classified under AWS A5.18 and CSA W48 standards and is approved for use in construction equipment, structural steel, tanks, and other fabrication applications.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AUTOMIG 70S-6 N GMAW/GTAW C-Mn STEEL

COPPER FREE C-Mn STEEL GMAW FILLER WIRE

CLASSIFICATION : AWS A/SFA 5.18 EN ISO 14341-A CSA W48 APPROVALS :


ER70S-6 G 42 4 M 3Si1 B-G 49A 3C1 S6 CWB/CE

KEY FEATURES :
• Copper free C-Mn steel solid wire • Best suited for high speed welding
• Smooth and stable arc • Operates at high current density
• Lowest spatter, Smooth feedability • Suitable for applications where dirt, rust or
• Best anti-rust properties mill-scale is present
• Low smoke levels • Radiographic quality weld

WELDING POSITION : DCEP

Shielding Gas Gas Flow Rate, LPM Stickout, mm


CO2 12-20 10-20
80Ar+20CO2 18-25 10-20

TYPICAL APPLICATIONS :
• Construction and mining equipment • Auto body
• Structural steel components • Farm implements, Steel casings
• Frame fabrication, Tanks • High-speed robotic, automatic and semi-
• General fabrication automatic welding applications

STORAGE / HANDLING :
Keep dry and follow handling instructions mentioned on the box

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si S P Cu
Specification 0.06-0.14 1.40-1.60 0.80-1.0 0.025 max 0.025 max 0.20 max
Ni Cr Mo V Al Ti+Zr
Specification 0.05 max 0.05 max 0.05 max 0.01 max 0.01 max 0.05 max

MECHANICAL PROPERTIES OF ALL WELD METAL :


UTS, MPa YS at 0.2% EL% CVN Impact
Condition
offset, MPa at -40°C, J
Specification As Welded 500-640 420 min 22 min 47 min

Hardness, 3 Layer: 200 BHN max (irrespective of type of gas used)

PARAMETERS - PACKING DATA :


Ø, mm Voltage, V Amperage, A Kg/Spool
0.8 17-27 80-250 15
1.0 18-30 100-350 15
1.2 20-34 120-400 15
1.6 24-36 150-450 15
MIGPAC DRUM in 100 / 250 Kgs can be made available on request.

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

11

You might also like