Scribd
Upload
197 views1 page

Tigfil 90S-B3 SPL: Classification: Aws A/Sfa 5.28

This document provides information on TIGFIL 90S-B3 SPL filler rod for welding low alloy steel. It is a copper coated solid wire suitable for welding 2.25Cr-1Mo creep resistant steels. It produces notch free welds with superior strength and toughness after post weld heat treatment. Typical applications include welding of materials used in refineries, petrochemical plants, and fertilizer plants operating at high temperatures. The document lists the classification, key features, welding position, typical applications, storage/handling, chemical composition, mechanical properties, and packing details of the filler rod.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
197 views1 page

Tigfil 90S-B3 SPL: Classification: Aws A/Sfa 5.28

This document provides information on TIGFIL 90S-B3 SPL filler rod for welding low alloy steel. It is a copper coated solid wire suitable for welding 2.25Cr-1Mo creep resistant steels. It produces notch free welds with superior strength and toughness after post weld heat treatment. Typical applications include welding of materials used in refineries, petrochemical plants, and fertilizer plants operating at high temperatures. The document lists the classification, key features, welding position, typical applications, storage/handling, chemical composition, mechanical properties, and packing details of the filler rod.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FCAW

LOW ALLOY STEEL


TIGFIL 90S-B3 SPL (High Temperature)

2.25Cr–1Mo COPPER COATED SOLID FILLER ROD FOR CREEP RESISTANCE

CLASSIFICATION : AWS A/SFA 5.28 EN ISO 21952-A


ER90S-B3 W CrMo2Si

KEY FEATURES :
• Copper coated low alloy steel solid filler rod • Superior strength and toughness after PWHT
• Typical 2.25 Cr-1 Mo weld deposit • Meets X factor requirement
• Notch free welds with excellent mechanical properties • Radiographic quality weld

WELDING POSITION : DCEN

Shielding Gas Gas Flow Rate, LPM


Ar 10-15

TYPICAL APPLICATIONS :
• Welding of 2.25Cr-0.5Mo, 2.25Cr-1Mo type creep • Joining of P5A materials
resistant steels • Cr-Mo and Cr-Mo-V bearing steels for high
• Joining ASTM A 335 Gr.P22, A 387 Gr.22 materials temperature applications
• Refineries, Petrochemicals and fertilizers plant • Suitable for 12CrMo9-10, 10CrSiMoV7
German steels

STORAGE / HANDLING :

Keep dry during storage and handling

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si Cr Mo Cu*
Specification 0.07-0.12 0.40-0.70 0.40-0.70 2.30-2.70 0.90-1.20 0.15 max
As Sn Sb S P
Specification 0.005 max 0.005 max 0.005 max 0.010 max 0.010 max
* Including Cu in the coating

MECHANICAL PROPERTIES OF ALL WELD METAL :


YS at 0.2% CVN Impact
Condition UTS, MPa EL%
offset, MPa at -30°C, J
Specification PWHT: 690°C for 1 Hr 620 min 540 min 17 min 27 min

PARAMETERS - PACKING DATA :


Ø, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20
3.2 x 1000 5 4 20

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

16

You might also like