Scribd
Upload
115 views1 page

AUTOMIG 80S-Ni1 / TIGFIL 80S-Ni1: AWS A/SFA 5.28 EN ISO 14341-A EN ISO 636-A

This document provides information on copper coated low alloy steel solid filler wires for gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW). The wires contain approximately 1% nickel and manganese and have a uniform copper coating. They are designed to produce weld deposits with medium strength and high impact resistance down to -45°C. Typical applications include welding of steels for sub-zero temperature use and fine grained low alloy nickel steels.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views1 page

AUTOMIG 80S-Ni1 / TIGFIL 80S-Ni1: AWS A/SFA 5.28 EN ISO 14341-A EN ISO 636-A

This document provides information on copper coated low alloy steel solid filler wires for gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW). The wires contain approximately 1% nickel and manganese and have a uniform copper coating. They are designed to produce weld deposits with medium strength and high impact resistance down to -45°C. Typical applications include welding of steels for sub-zero temperature use and fine grained low alloy nickel steels.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AUTOMIG 80S-Ni1 / GMAW/GTAW

LOW ALLOY STEEL


TIGFIL 80S-Ni1 (Low Temperature)

COPPER COATED 1% Ni ALLOYED WIRE FOR LOW TEMPERATURE IMPACT


PROPERTIES

CLASSIFICATION : EN ISO 14341-A EN ISO 636-A AWS A/SFA 5.28 APPROVALS :


Automig 80S-Ni1: G 46 4 M G3Ni1 - ER80S-Ni1 -
Tigfil 80S-Ni1: - W 46 4 W3Ni1 ER80S-Ni1 IBR

KEY FEATURES :
• Copper coated low alloy steel solid filler • Medium strength weld deposit gives high
wire & rod impact at -45°C
• Typical 1%Ni-Mn alloy • Radiographic quality weld
• Uniform copper coating

GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: Ar/1-5O2 15-22 10-20
GTAW: Ar 10-15 -

TYPICAL APPLICATIONS :
• Welding of 1% Ni steels • Welding of steels for application at sub-zero
• Welding fine grained and low alloyed Ni steels temperature

STORAGE / HANDLING :

Keep dry and follow handling instructions mentioned on the box


CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :
C Mn Si Ni Mo Cu* S P
Specification 0.12 max 1.25 max 0.40-0.80 0.80-1.10 0.35 max 0.35 max 0.025 max 0.025 max
* Including Cu in the coating
MECHANICAL PROPERTIES OF ALL WELD METAL :
UTS, MPa YS at 0.2% offset, EL% CVN Impact at
Condition
MPa -45°C, J
Specification As Welded 550 min 480 min 24 min 28 min

Hardness, 3 Layer: 210 BHN max (irrespective of type of gas used)


Mechanical properties will vary with the type of shielding gas used.

PACKING DATA :
Ø, mm Kg/Spool
Automig 80S-Ni1 1.2 15
1.6 15
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
Tigfil 80S-Ni1
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20

EQUIVALENT :
SMAW Electrode: Tenalloy 70C

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

20

You might also like