TYN 0516 ---> TYN 816
SCR
..
FEATURES
     HIGH SURGE CAPABILITY
 .   HIGH ON-STATE CURRENT
     HIGH STABILITY AND RELIABILITY
DESCRIPTION
The TYN 0516 ---> TYN 816 Family Silicon Con-                                                                 G
                                                                                                          A
trolled Rectifiers are high performance glass passi-                                                  K
vated chips technology.
This general purpose Family Silicon Controlled                                         TO220AB
Rectifiers is designed for power supply up to                                           (Plastic)
400Hz on resistive or inductive load.
ABSOLUTE RATINGS (limiting values)
     Symbol                               Parameter                                           Value               Unit
     IT(RMS)   RMS on-state current                                Tc = 95 °C                   16                 A
               (180° conduction angle)
     IT(AV)    Average on-state current                            Tc = 95 °C                   10                 A
               (180° conduction angle, single phase circuit)
      ITSM     Non repetitive surge peak on-state current          tp = 8.3 ms                 167                 A
               ( Tj initial = 25°C )
                                                                   tp = 10 ms                  160
       I2t     I2t value                                           tp = 10 ms                  128                A2s
      dI/dt    Critical rate of rise of on-state current                                       100                A/µs
               Gate supply : IG = 100 mA diG/dt = 1 A/µs
      Tstg     Storage and operating junction temperature range                           - 40 to + 150           °C
       Tj                                                                                 - 40 to + 125           °C
       Tl      Maximum lead temperature for soldering during 10 s at 4.5 mm                    260                °C
               from case
     Symbol                 Parameter                                            TYN                              Unit
                                                         0516     116     216          416     616    816
     VDRM      Repetitive peak off-state voltage            50    100     200          400     600    800          V
     VRRM      Tj = 125 °C
March 1995                                                                                                             1/4
               This datasheet has been downloaded from http://www.digchip.com at this page
TYN 0516 ---> TYN 816
THERMAL RESISTANCES
      Symbol                                   Parameter                                 Value   Unit
      Rth (j-a)   Junction to ambient                                                     60     °C/W
Rth (j-c) DC Junction to case for DC                                                      2.0    °C/W
GATE CHARACTERISTICS (maximum values)
PG (AV) = 1W        PGM = 10W (tp = 20 µs)       IFGM = 4A (tp = 20 µs)    VRGM = 5 V.
ELECTRICAL CHARACTERISTICS
  Symbol                                    Test Conditions                              Value   Unit
       IGT        VD=12V      (DC)   RL =33Ω                    Tj=25°C      MAX          25     mA
       VGT        VD=12V      (DC)   RL =33Ω                    Tj=25°C      MAX          1.5     V
       VGD        VD=VDRM R L=3.3kΩ                            Tj= 125°C     MIN          0.2     V
        tgt       VD=VDRM IG = 90mA                             Tj=25°C      TYP          2       µs
                  dIG/dt = 0.8A/µs
        IL        IG= 1.2 IGT                                   Tj=25°C      TYP          70     mA
        IH        IT= 100mA     gate open                       Tj=25°C      MAX          40     mA
       VTM        ITM= 32A tp= 380µs                            Tj=25°C      MAX          1.6     V
      IDRM        VDRM     Rated                                Tj=25°C      MAX         0.01    mA
      IRRM        VRRM     Rated
                                                               Tj= 125°C                  2
       dV/dt      Linear slope up to VD =67%VDRM               Tj= 125°C     MIN         500     V/µs
                  gate open
        tq        VD=67%VDRM ITM= 32A VR= 25V                  Tj= 125°C     TYP          70      µs
                  dITM/dt=30 A/µs dVD /dt= 50V/µs
2/4
                                                                                            TYN 0516 ---> TYN 816
Fig.1 : Maximum average power dissipation versus            Fig.2 : Correlation between maximum average power
average on-state current.                                   dissipation and maximum allowable temperatures (Tamb
                                                            and T case) for different thermal resistances heatsink +
                                                            contact.
Fig.3 : Average       on-state   current   versus   case    Fig.4 : Relative variation of thermal impedance versus
temperature.                                                pulse duration.
                                                                   Zth/Rth
                                                              1
                                                                                    Zt h( j-c)
                                                             0.1                                           Zt h( j-a)
                                                                                                                           tp (s)
                                                            0.01
                                                               1E-3          1E-2       1E-1     1E +0   1 E +1         1E +2 5 E+2
Fig.5 : Relative variation of gate trigger current versus   Fig.6 : Non repetitive surge peak on-state current
junction temperature.                                       versus number of cycles.
                                                                                                                                    3/4
TYN 0516 ---> TYN 816
Fig.7 : Non repetitive surge peak on-state current for a                Fig.8 : On-state characteristics (maximum values).
sinusoidal pulse with width : t ≤ 10 ms, and
corresponding value of I2t.
PACKAGE MECHANICAL DATA
TO220AB Plastic
                                                                                 REF.               DIMENSIONS
                                                                                             Millimeters     Inches
                          A                                                                 Min.    Max.  Min.   Max.
                                                        H
                                     G              J                              A        10.00 10.40 0.393 0.409
                                                                                   B        15.20 15.90 0.598 0.625
                I                        D
                                                                                   C        13.00 14.00 0.511 0.551
                                                B                                  D         6.20   6.60 0.244 0.259
                                                                                   F         3.50   4.20 0.137 0.165
                                                                                   G         2.65   2.95 0.104 0.116
                                     F                                             H         4.40   4.60 0.173 0.181
                                 O                           L
                    P                          C                                   I         3.75   3.85 0.147 0.151
                                                                                   J         1.23   1.32 0.048 0.051
                                                             M                     L         0.49   0.70 0.019 0.027
                         = N=
                                                                                   M         2.40   2.72 0.094 0.107
                                                                                   N         4.80   5.40 0.188 0.212
                                                                                   O         1.14   1.70 0.044 0.066
                                                                                   P         0.61   0.88 0.024 0.034
Cooling method : C                                                      Recommended torque value : 0.8 m.N.
Marking : type number                                                   Maximum torque value : 1 m.N.
Weight : 2.3 g
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability
for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may
result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-T HOMSON Microelectronics.
Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems
without express written approval of SGS-THOMSON Microelectronics.
                         1995 SGS-THOMSON Microelectronics - Printed in Italy - All rights reserved.
                                SGS-THOMSON Microelectronics GROUP OF COMPANIES
 Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Nether-
             lands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
4/4