Schneider Electric Global Marketing - Low-Res PDF
The all-in-one system for
effective surge protection
> Acti 9 SPDs
Surge protection devices for complete
safety in any installation
100%
exclu sive troElectric
e
Schneid
Acti 9: The efficiency you deserve
Schneider Electric Global Marketing - Low-Res PDF
998-6713_GMA-GB_A.indd 1 10/19/2012 5:33:36 AM
iQuick PRD
All-in-one integrated ‘With the iQuick PF version, the optimized earth connection system simplifies my installation
and avoids wiring issues. Even the busbar is already mounted in compliance with associated
surge protection devices protection requirements . My installation is safe and in total compliance with SPD rules’
H. Richard - electrician, Lyon, France
A complement to the Acti 9™ system and exclusive to Schneider Electric, the Acti 9 type-2
Surge Protection Devices (SPDs) are designed for absolute safety and improved continuity
Complete safety Efficient
of service. Perfect for industrial and tertiary applications, Acti 9 SPDs protect your electrical For the installation: Continuity of service:
installations and sensitive equipment against induced or conducted surges caused by indirect >> Integrated magnetic short circuit disconnector >> Integrated or associated SPD and disconnector
lightning strikes. So your installation is 100% protected, even in the most demanding environments. with VisiSafe inside still in parallel of the electrical distribution network
>> IEC compliant with IEC/EN 61643-11 certification >> SPD VisiTrip front face global indicator, dedicated
Remote Pluggable Available only from
>> Permanent surge protection signalization and to each cartridge
Schneider Electric
indicator cartridges SPD over remote indication, compatible with
Simplified maintenance:
for connection to for easy Acti 9 communication system
ComReady maintenance >> Quick replacement of damaged surge
Acti 9 Smartlink or PLC For the operator: arrester cartridges
>> Class 2 front face for absolute protection >> Remote signalisation
>> Robust external integrity remains intact, even in
Short circuit case of SPD destruction
disconnector
Simple and smart
Easy to design:
>> An all-in-one solution, ready to be connected to
Acti 9 communication system via Ti24 interface
Ready to be connected to
Acti 9 Smartlink through >> Coordination table, dedicated software for easy
Modbus network
SPD selection
VisiSafe
for complete ComReady Easy to choose:
operator safety VisiTrip >> Type 2 wide range: up to 65 KA (8/20) per pole
with end-of-life
indicators >> Type 1 wide range: up to 25 kA (10/350) per pole
>> Integrated disconnector versions with full
coordination warranty
Easy to install:
>> Saves up to 30 percent installation time, reduces
All in one integrated power connections by 50 percent
‘Thanks to the iQuick PRD and its pre-wired cables I don’t need solution for complete
specific installation training. The simple install sticker on its side safety capabilities >> Optimized cables (length < 0.50m), integrated
shows how easy it is to complete the earth connection. In fact, earthing system connection instructions
everything inside the box makes the installation easy’
>> Reversible cartridge version for top
H. Rascon, building technician, or bottom connections
Sevilla, Spain
50% 100% Green innovation Lightning protection
less wiring connections coordination with RoHS and REACH Commercial, industrial, and
thanks to all-in-one design integrated MCB compliant critical power applications
disconnector
2 3
998-6713_GMA-GB_A.indd 2-3 10/19/2012 5:33:43 AM
Acti 9 SPDs panorama
Characteristics Residential Buildings Industry
-- Iimp from 12.5kA to
power network protection
100kA(10/350)
-- In from 25kA to 50 Type 1 + 2 Type 1
Direct lightning
kA(8/20)
SPD Type 1:
-- Up<1.5kV
-- Uc = 350V,440V
-- 1P to 4P
-- Monobloc(F) and
pluggable (D) iPRF 1 12, 5r PRD1 25r PRF1 master PRD1 Master
-- TT, TNS, IT
-- Remote transfer
-- Imax from 8 kA to 65
Surge/transient overtoltage
power network protection
kA(8/20)
Type 2 integrated Type 2 integrated Type 2 + 3 Type 2 + 3 integrated
-- In from 2.5kA to 20
SPD Type 2 and 3:
disconnector disconnector stand alone disconnector
kA(8/20)
& MSU
-- Up from 1 to 2.5kV
-- Uc = 320V, 350V,460V
-- 1P to 4P
-- Monobloc(F) and
pluggable (D) Domae
PF ‘click Combi SPU iPF iPRD iQuick PF iQuick PRD
-- TT, TNS, IT Quick PF
-- Remote transfer
Surge/transient overtoltage
-- Imax = 10, 18kA(8/20)
Telecom protection
-- In = 10 kA (8/20)
SPD Telecom:
-- Up = 70V, 300V
-- Uc = 53Vdc, 180Vdc
-- 1P
iPRC iPRI
SPD Type 2 Photovoltaic:
TDC network protection
-- Imax = 40kA(8/20)
-- In = 15kA(8/20)
-- Up = 2.8kV, 3.9kV
-- Ucpv = 600 Vdc,
1000 Vdc
iPRD PV DC 600V iPRD PV DC 1000VDC
Schneider Electric Industries SAS
Head Office
35 rue Joseph Monier
92500 Rueil Malmaison Cedex- France
Tel.: +33 (0)1 41 29 70 00
www.schneider-electric.com
©2012 Schneider Electric. All Rights Reserved. Schneider Electric, Acti 9, Reflex, and Make the most of your energy are trademarks owned by Schneider
Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners. 998-6713_A_GMA-GB
998-6713_GMA-GB_A.indd 2 10/19/2012 5:33:49 AM
