Scribd
Upload
193 views1 page

Marker Making & Order Processing Guide

This document provides instructions for cutting and marking a garment order. It outlines 9 steps for entering order details into the PITS or Oracle system, including verifying quantities, adding the order, entering size details, cut status, shade and shrinkage. It also outlines 10 steps for the marker making process, including confirming measurements, model/size, small parts, marker pages, directions, and average calculations. The order details and marker making are to be processed, calculated, and verified by supervisors and managers at different stages.

Uploaded by

Shoaib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
193 views1 page

Marker Making & Order Processing Guide

This document provides instructions for cutting and marking a garment order. It outlines 9 steps for entering order details into the PITS or Oracle system, including verifying quantities, adding the order, entering size details, cut status, shade and shrinkage. It also outlines 10 steps for the marker making process, including confirming measurements, model/size, small parts, marker pages, directions, and average calculations. The order details and marker making are to be processed, calculated, and verified by supervisors and managers at different stages.

Uploaded by

Shoaib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CUT DETAIL (US-5) QHSE

Fab. Source: Over Cut: 4% PC Avg. (M) US#


Cust. Brand/Description Body Fabric: PO Qty. (0%) VMD Avg.(Y) PPS#
PO# PC Fabric: Req. cut Qty. VMD Avg.(M) Y/M
OC# Season: Article: Act. Cut Qty: GGT.Avg.(M) CUT # 786
ETD# Wash: Difference: M. Efficiency OK
Cut Mrk. Pair / Change Mrk. Bdle.
SR. #
Qty. Name Plies in Plies Length
Cut#
Qty.
DOUBLE PLY Mrk.Eff.

Sizes
US5/GMT/CAD/REC/15 PITS / Oracle Working Check List
PITS Order I.D. # Enter Name:
PITS ORACLE
1. Mail send against order not showing in PITS / Oracle Mail Send

2. Before Order Feeding in PITS / ORACLE system, Search O.C. # and verify the Verifiy OK
quantity.

3. Then add order in PITS / ORACLE system and mentioned Production Ord. ID Done
on first page of Size Detail & Check List.

4. Enter quantity in PITS / ORACLE system according to Size Detail & Check List and Yes
verify complete order at the end.

5. Cut Status of this order enter in the PITS / ORACLE system. Yes

6. Shade and Shrinkage enter in PITS / ORACLE System Yes

7. Length and Marker Effciency enter in PITS / ORACLE System . Yes

8. Print out of complete PITS / ORACLE Order's working and attached with the file. Yes

9. Scan Full Working & mail send. Yes

ORACLE / PITS DATA ENTERED BY ORACLE / PITS DATA VERIFIED BY


(Officer CAD, PITS Working) (A.M. Preproduction CAD) / (A.M. Production CAD)

US5/GMT/CAD/REC/15 Order Process & Marker Making Check List


Shell CAD Average P.C. CAD Average Markers Plotted By:

Shell Fabric Width P.C. Fabric Width Markers Received By:

Marker Efficiency No. of Markers: No. of Cut Pieces:


Before Marker Making please confirm and tick the following:
1. Confirm Inseam by placing the cursor on the piece.
2. Confirm Model & Size by placing the cursor on the piece and verify shrinkage in Order Editor before starting the marker making.

3. Check No. of All Small Parts as per the Provided Sample.


4. Check the No. of pages in the marker.
5. Check Directions of all Parts as per Provided Sample.
6. One way marker required (Peach or Melange Cordroy)
7. Check Belt and Loop Width according as mentioned on Size Detail.
8. Order average & efficiency will be calculate with new average format and saved separately for future reference.

9. In case of Average Increase of an order from VMD average, will be discussed with CAD and Cutting Manager for before further
proceedings.
10. After complete marker making, enter average and efficiency in Complete Orders Status.

MARKERS & ORDER PROCESSED BY MARKERS & CAD AVERAGE CALCULATED BY MARKER & CAD AVERAGE
CALCULATIONS VERIFIED BY
(Supervisor CAD, Marker Making) (Supervisor CAD, Marker Making) (In-charge CAD, Marker Making)

Document #: US/CAD/FRM-010/CDL REV: 00 Effective Date: Jan 01,2016 Page 9 of 9

You might also like