Scribd
Upload
555 views5 pages

Linear Actuators JC35D: Data Sheet

The document provides specifications for the JC35D linear actuator. It can produce thrusts up to 6000 N in push and 4000 N in pull. It features a 24V DC permanent magnet motor, IP43 protection, and aluminum alloy construction. Options include push-only function, hall sensor feedback, and reed switch feedback. It is intended for ambient temperatures between 5-40°C and intermittent duty cycles. Technical specifications include spindle pitches from 4-16mm, typical speeds and currents under loaded and unloaded conditions.

Uploaded by

JULIAN TABARES RESTREPO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
555 views5 pages

Linear Actuators JC35D: Data Sheet

The document provides specifications for the JC35D linear actuator. It can produce thrusts up to 6000 N in push and 4000 N in pull. It features a 24V DC permanent magnet motor, IP43 protection, and aluminum alloy construction. Options include push-only function, hall sensor feedback, and reed switch feedback. It is intended for ambient temperatures between 5-40°C and intermittent duty cycles. Technical specifications include spindle pitches from 4-16mm, typical speeds and currents under loaded and unloaded conditions.

Uploaded by

JULIAN TABARES RESTREPO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Data sheet

Linear Actuators JC35D

www.jiecang.com
Data sheet

JC35D

Features
24V DC permanent magnet motor

Thrust up to 6000 N in push and up to 4000 N in pull

Color: grey or black

Standard protection class: IP43

Aluminium-Alloy outer tube and inner tube, beautiful and

corrosion resistant

Low noise; The average noise level is lower than 48dB

(ambient noise is less than 40dB).

Built-in electronic limit switches

High-strength front and back

Certificate : CE，UL60601-1，IEC60601-1

Options
Only push no pull function: Optional

Hall sensor feedback: Optional

Reed switch feedback: Optional

Without Relay system: Optional

Usage
Ambient temperature: +5 º to +40 º

Duty cycle: Max 10% or 2 minutes continues use followed by 18 minutes not in use

Matching control box: JCB35E,JCB35Q,JCB35T,JCB35R

01
Technical specifications

Spindle Max. load Max. load Self-lock Typical speed Typical speed Typical Amp
pitch push pull (N) Unloaded full load full load
mm (N) (N) (mm) (mm) (A)

4 6000 4000 6000 4.5 3 4

5 4000 4000 4000 6 4 3.3

7.5 3000 3000 3000 9 6 3.3

5 2000 2000 2000 13 9 4

7.5 1500 1500 1500 20 13 4

12 1000 1000 1000 30 21 3.8

16 750 750 750 42 26 4.5

Comments to table

The above measures are made in connection with 24V DC stabilized voltage supply.

JIECANG control boxes are designed so that they will short-circuit the motor terminals (poles)

of the actuator(s) when the actuator(s) are not running. This solution gives the actuator(s) a higher

self-locking ability. If the actuator(s) are not connected to a JIECANG control box, the terminals of

the motor must be short-circuited to achieve the self-locking ability of the actuator.

When the load in push is above 6000N, the max. stroke length is 400mm;

When the load in push is above 4000N, the max. stroke length is 500mm;

When the load in push is above 3000N, the max. stroke length is 600mm;

When the load in push is above 2000N, the max. stroke length is 650mm;

When the load in push is above 1500N, the max. stroke length is 650mm;

When the load in push is above 1000N, the max. stroke length is 650mm;

When the load in push is above 750N, the max. stroke length is 700mm;

02
Dimension

34

JC35D mounting with JCB35Q Installation dimensions

L=S+175（S＜400）

L=S+195（S≥400）

03
Ordering Key

JC35D - Y - 6 - 3 - 24 - 100/275 - V - G - D - Z - K - 0 - 10 - 2D0

Cable length
Plug and cable
Brake
Top clevis
End clevis material
End clevis
Color
Mounting position
Stroke / Retracted length
Input voltage
Speed at full load
Load capacity
Optional feature ★
Type

0 Standard
Y Hall sensor feedback
R Reed Switch feedback
P Only push no pull

04

You might also like