Linear actuator JC35D
Data sheet
Linear actuator JC35D
JC35D is small and low-noise with simple design and high reliability.
It has the following configuration:
JC35D-6000N; JC35D-4000N; JC35D-3000N; JC35D-2000N; JC35D-1500N;
JC35D-1000N; JC35D-750N. It is mainly used in thrust applications;
JC35D is widely used in all kinds of beds.
Features and options:
Load thrust: 6000N；4000N; 3000N;
2000N; 1500N; 1000N; 750N Noise level: non load≤48dB,
Color: gray RAL7035; black RAL9005 ( environmental noise≤40dB)
Max IP Grade: IP43 Only push no pull: optional
Motor: 24VDC Hall sensor: optional
Stroke length: Reed switch: optional
6000N：50-400mm； Built-in electronic limit switches
4000N：50-400mm； Weight: About 1.5kg (different stroke/
3000N：50-600mm； retracted length with different weight )
2000N：50-600mm； Static bending moment: lateral load are not allowed
1500N：50-600mm； Flame retardant grade: UL94-HB
1000N：50-600mm；
750N：50-600mm；
Installation length:
L=225（S＜50）
L=S+175（50≤S＜400）
L=S+195（S≥400）
01
Usage
Duty cycle: 10%, max 2 min continuous working and 18 min off
Operating temperature: 5~40℃
Storage temperature: -10~50℃
Supporting controller: it can be matched with Jiecang standard controller.
Relative humidity: 20% - 90% at 25 ℃, non condensing
Atmospheric pressure: 700-1060hPa
Certification
IEC60601-1:2012
EN60601-1:2006+A12:2014
ANSI/AAMI ES60601-1:2005(R) 2012 and A1:2012, C1:2009/(R)
2012 and A2:2010/(R) 2012
Technical parameters
Spindle Max. load Max. load Self-lock Typical speed Typical speed Typical Amp
pitch push pull Unloaded full load full load
mm (N) (N) (N) (mm/s) (mm/s) (A)
4 6000 4000 6000 4.5 3 4
5 4000 4000 4000 6 4 3.3
7.5 3000 3000 3000 9 6 3.3
5 2000 2000 2000 13 9 4
7.5 1500 1500 1500 20 13 4
12 1000 1000 1000 30 21 3.8
16 750 750 750 42 26 4.5
02
Ordering key
Model JC35D
Optional features X 0=No optional function
P= Only push no pull option
Y= Hall sensor option
R= Reed switch option
PR= Reed switch + only push no pull option
PY=Hall sensor+ only push no pull option
Load capacity X 6=6000N
4=4000N
3=3000N
2=2000N
1D5=1500N
1=1000N
0D75=750N
Speed at full load 3=3mm/s
4=4mm/s
6=6mm/s
9=9mm/s
13=13mm/s
21=21mm/s
26=26mm/s
Input voltage XX 24=24VDC
Stroke/Retracted XXX/XXX Stroke length=XXX
length Retracted length=XXX
H=H direction: the hole is perpendicular to the ground
Clevis direction X
V=V direction: the hole is parallel to the ground
Actuator color X G=Gray(RAL7035)
B=Black(RAL9005)
End clevis X D=End clevis number
specification
End clevis material X L=Aluminium alloy
Top clevis XX 05=F05: Groove width is 6.5, the depth is 26, and the bore diameter isφ10.1 withφ24
specification aluminum tube.
08=F08: inner tube opening 14.2, the distance between the hole and the end face is 17;
add D inner tube top clevis bushing, aperture 10.1; add D inner tube top clevis sleeve (black)
09=F09: inner tube opening 14.2, the distance between the hole and the end face is 17;
add D inner tube top clevis bushing, aperture 10.1; add D inner tube top clevis sleeve (white)
Brake specification X 0=No brake
1=Left brake
2=Right brake
Plug and cable XX 02=4-pin straight plug 2-pin straight line
10=5-pin straight plug 6-pin straight line
Cable length XXX 2D0=2m
0D5=0.5m
03
Dimension
44 26
50
20
∅24
∅10.1
25 25
∅10.1
15 34 11
112
L=225(S≤50） S
L=S+175(50＜S＜400）
L=S+195(S≥400）
6.5
6.5
26
36
148
JC35D mounting with JCB35Q Installation dimensions
L=225(S≤50)
L=S+175(50﹤S﹤400)
L=S+195(S≥400)
04
End clevis specification
+0.3
+0.2 6.5 0
∅10.1 0
28.5 29.8
32
15 20
Top clevis specification
05= The groove width is 6.5, the depth is 26, and the bore diameter is φ10.1 with φ24 aluminum tube.
∅24
28.07
∅10.1
30.91
08,09= Inner tube opening 14.2, hole distance from end face is 17, adding D-type top clevis pad,
hole diameter φ10.1 adding D-type inner tube top clevis.
∅24
∅10.1
6.5
∅25
15
05
Motor cable: 4pin actuator plug (normal plug)
5pin actuator plug (hall sensor)
1=4pin actuator plug
Matching controller: JCB35Q/JCB35T/JCB35R/JCB35R1/JCB35S/JCB35K2
4pin actuator plug (normal plug)
pin pincolor function
1 NC not connected
2 brown when positive voltage power on, actuator go down
3 blue when positive voltage power on, actuator go up
4 NC not connected
outer circle NC not connected
60
22.5
∅18.3
2=5pin actuator straight plug
Matching controller: JCB35Q/JCB35T/JCB35R/JCB35R1/JCB35S/JCB35K2
5pin actuator straight plug (double hall sensor actuators)
pin color function
1 red 5V
2 brown when positive voltage power on, actuator go down
3 black GND
4 blue when positive voltage power on, actuator go up
5 yellow hall signal 1
outer circle orange hall signal 2
60
22.5
∅18.3
06
Diagram of curves
JC35D Current vs Load
8
7
6
Current (A)
5
4
3
2
1
0
1 2 3 4 5 6
Load(KN)
JC35D Speed vs Load
14
12
10
Speed (mm/s)
0
1 2 3 4 5 6
Load(KN)
07
