Scribd
Upload
118 views1 page

Automotive Parts Inspection Report

This inspection report summarizes the testing of 909 wire actuator release parts against specifications. Key dimensions were checked using digital Verniers and fixtures and found to be within tolerances. No defects like dents, damage or burrs were found. The material of the parts was verified to be SAE 1018 steel as specified. The lot was accepted with zero defects found.

Uploaded by

Vinay Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
118 views1 page

Automotive Parts Inspection Report

This inspection report summarizes the testing of 909 wire actuator release parts against specifications. Key dimensions were checked using digital Verniers and fixtures and found to be within tolerances. No defects like dents, damage or burrs were found. The material of the parts was verified to be SAE 1018 steel as specified. The lot was accepted with zero defects found.

Uploaded by

Vinay Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

KHODIYAR SPRING INSPECTION REPORT

INDUSTRIES
Customer: AMVIAN AUTOMOTIVE PVT. LTD.
Part Name & No. : Wire Actuator Release ACCEPTED REPORT
LOT QTY. 909 PCS. MATERIAL : INVOICE NO :
CAU1030551 QTY. NO :
P.O. NO : AM003160 INSPECTIO
DRAWING NO. : CAU1030551 SAMPLE QTY. REJECT QTY. ------ AISM 1018
GRN : N DATE:
Sr.
SPECIFICATI Tolerance ACTUAL RESULT
CHARACTER Evaluation Remark If
ON
ISTICS Method Reading Over Under Decision Any
(Nominal) Min Max 1 2 3 4 5 6 7 8
Diff. Size By Size BY (Ok/Nok)
No.
1 Diameter 4.00 3.90 4.10 Digital Verniar

2 Dimension 17.82 17.57 18.07 Digital Verniar OK

Checking
3 Dimension 33.82 33.72 33.92 Fixture
Checking
4 Radius 94.27 94.17 94.37 Fixture
Checking
5 Dimension 70.50 70.25 70.75 Fixture
Checking
6 Dimension 23.50 23.25 23.75 Fixture
Checking
7 Dimension 116.00 115.75 116.25 Fixture
Checking
8 Dimension 18.00 17.75 18.25 Fixture

No Dent/Damage/Sharp
9 Visual Edge/Crack/Burr on edge
Visual

10 Material SAE 1018 TC

Note : All parts will be inspected as per the sample quantity, but results will be recorded only for eig
Acceptable Criteria is Zero defect.
Decision : Accepted / Rejected
✘

Inspected By : Verified By:

You might also like