WARNING For European models NOTE: 8)

Do not install near any heat sources such For North American, Mexican, Disposal of waste batteries
(applicable in the European
4-299-353-12(2) This equipment has been tested and found to as radiators, heat registers, stoves, or
To reduce the risk of fire or electric shock, do This appliance comply with the limits for a Class B digital other apparatus (including amplifiers)
and Brazilian models Union and other European
not expose this apparatus to rain or moisture. is classified as a device, pursuant to Part 15 of the FCC Rules. that produce heat. This symbol is intended to alert the countries with separate
To reduce the risk of fire or electric shock, do CLASS 1 user to the presence of uninsulated collection systems)
These limits are designed to provide 9) Do not defeat the safety purpose of the
not expose this apparatus to dripping or LASER product. “dangerous voltage” within the This symbol on the battery or
reasonable protection against harmful polarized or grounding-type plug. A
splashing, and do not place objects filled with This marking is product’s enclosure that may be of sufficient on the packaging indicates that the battery
interference in a residential installation. This polarized plug has two blades with one
liquids, such as vases, on the apparatus. located on the magnitude to constitute a risk of electric provided with this product shall not be
equipment generates, uses, and can radiate wider than the other. A grounding type
To reduce the risk of fire, do not cover the rear exterior. shock to persons. treated as household waste.

DVD Home Theatre

radio frequency energy and, if not installed plug has two blades and a third grounding
ventilation opening of the apparatus with Notice for customers: The following On certain batteries this symbol might be
and used in accordance with the instructions, prong. The wide blade or the third prong This symbol is intended to alert the
newspapers, tablecloths, curtains, etc. information is only applicable to equipment used in combination with a chemical symbol.
may cause harmful interference to radio are provided for your safety. If the user to the presence of important
Do not place the naked flame sources such as sold in countries applying EU directives. The chemical symbols for mercury (Hg) or
communications. However, there is no provided plug does not fit into your

System The manufacturer of this product is Sony operating and maintenance lead (Pb) are added if the battery contains
lighted candles on the apparatus. guarantee that interference will not occur in a outlet, consult an electrician for
Corporation, 1-7-1 Konan Minato-ku Tokyo, (servicing) instructions in the literature more than 0.0005% mercury or 0.004% lead.
As the main plug is used to disconnect the particular installation. If this equipment does replacement of the obsolete outlet.
108-0075 Japan. The Authorized accompanying the appliance. By ensuring these batteries are disposed of
unit from the mains, connect the unit to an cause harmful interference to radio or 10) Protect the power cord from being
easily accessible AC outlet. Should you notice Representative for EMC and product safety is correctly, you will help prevent potentially
television reception, which can be determined walked on or pinched particularly at For the customers in Europe,
Operating Instructions an abnormality in the unit, disconnect the Sony Deutschland GmbH, Hedelfinger Strasse by turning the equipment off and on, the user plugs, convenience receptacles, and the
negative consequences for the environment
main plug from the AC outlet immediately. 61, 70327 Stuttgart, Germany. For any service Russia and Australia and human health which could otherwise be
is encouraged to try to correct the point where they exit from the apparatus.
The main plug is used to disconnect this or guarantee matters please refer to the Disposal of Old Electrical &
caused by inappropriate waste handling of the
interference by one or more of the following 11) Only use attachments/accessories
device from the AC outlet, so position this addresses given in separate service or Electronic Equipment battery. The recycling of the materials will
measures: specified by the manufacturer.
device in a location where it can be easily guarantee documents. (Applicable in the European help to conserve natural resources.
 Reorient or relocate the receiving antenna. 12) Use only with the cart, stand, tripod,
unplugged. Union and other European In case of products that for safety,
 Increase the separation between the bracket, or table specified by the
Do not install the appliance in a confined This equipment has been tested and found to countries with separate performance or data integrity reasons require
equipment and receiver. manufacturer, or sold with the apparatus. collection systems)
space, such as a bookcase or built-in cabinet. comply with the limits set out in the EMC a permanent connection with an incorporated
 Connect the equipment into an outlet on a When a cart is used, use caution when This symbol on the product or
Do not expose batteries or apparatus with Directive using a connection cable shorter battery, this battery should be replaced by
circuit different from that to which the moving the cart/apparatus combination on its packaging indicates that
battery-installed to excessive heat such as than 3 meters. (European models only) qualified service staff only. To ensure that the
receiver is connected. to avoid injury from tip-over. this product shall not be treated as household
sunshine, fire or the like. battery will be treated properly, hand over the
 Consult the dealer or an experienced radio/ waste. Instead it shall be handed over to the
The unit is not disconnected from the mains For the customers in the USA TV technician for help.
product at end-of-life to the applicable
applicable collection point for the recycling of collection point for the recycling of electrical
as long as it is connected to the AC outlet, Owner’s Record CAUTION electrical and electronic equipment. By and electronic equipment.
even if the unit itself has been turned off. The model and serial numbers are located on You are cautioned that any changes or ensuring this product is disposed of correctly, For all other batteries, please view the section
To prevent injury, this apparatus must be the rear exterior of the unit. Record these modifications not expressly approved in this you will help prevent potential negative on how to remove the battery from the
securely attached to the floor/wall in numbers in the space provided below. Refer 13) Unplug this apparatus during lightning
manual could void your authority to operate consequences for the environment and product safely. Hand the battery over to the
accordance with the installation instructions. to them whenever you call upon your Sony storms or when unused for long periods
this equipment. human health, which could otherwise be applicable collection point for the recycling of
Indoor use only. dealer regarding this product. of time.
Important Safety Instructions 14) Refer all servicing to qualified service caused by inappropriate waste handling of waste batteries.
CAUTION 1) Read these instructions. this product. The recycling of materials will For more detailed information about
The use of optical instruments with this Model No. DAV-TZ140 personnel. Servicing is required when the
2) Keep these instructions. apparatus has been damaged in any way, help to conserve natural resources. For more recycling of this product or battery, please
product will increase eye hazard. Serial No.______________ 3) Heed all warnings. detailed information about recycling of this
such as power-supply cord or plug is contact your local Civic Office, your
4) Follow all instructions. damaged, liquid has been spilled or product, please contact your local Civic household waste disposal service or the shop
The following FCC statement applies only to 5) Do not use this apparatus near water. Office, your household waste disposal service
objects have fallen into the apparatus, the where you purchased the product.
the version of this model manufactured for 6) Clean only with dry cloth. or the shop where you purchased the product.
sale in the USA. Other versions may not apparatus has been exposed to rain or
7) Do not block any ventilation openings. moisture, does not operate normally, or Applicable accessories: Remote Control.
comply with FCC technical regulations. Install in accordance with the has been dropped.
©2012 Sony Corporation Printed in China manufacturer’s instructions.

2 3 4
DAV-TZ140 GB

Playable Discs Note on playback operations of a DVD Playable Types of Files  It may take time to read files in the Unpacking
Some playback operations of a DVD may be following cases:
Trademarks NONCOMMERCIAL USE OF A intentionally restricted by software producers. Video  there are many folders or files. Checking the supplied items
DVD DVD-VIDEO
CONSUMER FOR DECODING VIDEO IN Since this system plays a DVD according to File format Extensions  the memory capacity of the USB device  Main unit (1)  Speakers (5)  Remote commander
This system incorporates with Dolby* Digital COMPLIANCE WITH THE MPEG-4
DVD-ROM the disc contents the software producers that you are using is very large. (remote) (1)
and Dolby Pro Logic adaptive matrix VISUAL STANDARD (“MPEG-4 VIDEO”) DVD-R/DVD-RW designed, some playback features may not be
MPEG4 Video1) “.mp4,” “.m4v”
 the memory of the USB device that you
surround decoders. THAT WAS ENCODED BY A CONSUMER DVD+R/DVD+RW available. Xvid Video2) “.avi”
* Manufactured under license from Dolby are using is fragmented.
ENGAGED IN A PERSONAL AND CD CD-DA (Music CD) Note about double-layer DVDs Music
Laboratories.
NONCOMMERCIAL ACTIVITY AND/OR CD-ROM The playback picture and sound may be
Dolby, Pro Logic, and the double-D File format Extensions
WAS OBTAINED FROM A VIDEO CD-R/CD-RW momentarily interrupted when the layers
symbol are trademarks of Dolby
PROVIDER LICENSED BY MPEG LA TO VIDEO CD switch. MP3 (MPEG1 Audio “.mp3”  Subwoofer (1)  FM wire antenna (aerial) (1)  R6 (size AA) batteries* (2)
Laboratories. Layer 3)3)
PROVIDE MPEG-4 VIDEO. Super VCD
This system incorporates High-Definition Region code (DVD VIDEO only)
NO LICENSE IS GRANTED OR SHALL BE WMA4) “.wma”
Multimedia Interface (HDMI™) technology. A CD or DVD will not play if it has not been Your system has a region code printed on the
IMPLIED FOR ANY OTHER USE.
HDMI, the HDMI Logo, and High-Definition correctly finalized. For more information, rear of the unit and will only play a DVD AAC 5) “.m4a”
ADDITIONAL INFORMATION  Video cord** (1)
Multimedia Interface are trademarks or refer to the operating instructions supplied VIDEO (playback only) labeled with an  High Speed HDMI cable** (1)
INCLUDING THAT RELATING TO Photo
registered trademarks of HDMI Licensing with the recording device. identical region code or ALL .
PROMOTIONAL, INTERNAL AND
LLC in the United States and other countries. File format Extensions
COMMERCIAL USES AND LICENSING Discs that cannot be played Note about Multi Session CD
MAY BE OBTAINED FROM MPEG LA,  Blu-ray Discs You can play only the first session of a JPEG “.jpg,” “.jpeg,” “.jpe”
“PlayStation” and “PS3” are registered  Operating Instructions
LLC. SEE http://www.mpegla.com/  HD DVDs multisession disc. 1) AVC is not compatible.
trademarks of Sony Computer Entertainment (this manual)
 DVD-RAMs 2) Unavailable on US models.
Inc.
All other trademarks are trademarks of their  DVD Audio discs 3) MP3PRO format is not compatible. * U.S. models only.
respective owners.  PHOTO CDs 4) WMA DRM,WMA Lossless or WMA ** High Speed HDMI cable and video cord are included only in certain areas.
“BRAVIA” is a trademark of Sony
 Super Audio CDs PRO format are not compatible.
Corporation.
 Data track of CD-Extras 5) AAC DRM and AAC Lossless formats are Preparing the remote control
About these Operating  Audio material side on DualDiscs not supported. Insert two R6 (size AA) batteries by matching the  and  ends on the batteries to the
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Instructions  DVD-R/DVD-RW/DVD+R/DVD+RW in Note markings inside the compartment.
“DVD” may be used as a general term for a VR (Video Recording) mode  Some files may not play depending on the
Thomson.
DVD VIDEO, DVD+RW/DVD+R, and  CPRM (Content Protection for Recordable format, the encoding, or recording
DVD-RW/DVD-R. Media)-compatible DVD-R/RW containing condition.
Windows Media is either a registered content flagged as “Copy once.”
trademark or trademark of Microsoft The system enters standby mode  Some USB devices may not work with this
Corporation in the United States and/or other Notes on discs system.
automatically.
countries. This product contains technology When the system is in pause, stop, open, or This product is designed to playback discs  The system supports ISO 9660 Level 1/
subject to certain intellectual property rights that conform to the Compact Disc (CD) Level 2, or Joliet in DATA CD.
no disc mode, the system will enter standby
of Microsoft. Use or distribution of this mode automatically after 30 minutes. standard. DualDiscs and some music discs  The system supports UDF (Universal Disk
technology outside of this product is encoded with copyright protection Format) in DATA DVD.
prohibited without the appropriate license(s) technologies do not conform to the Compact  The system supports FAT12, FAT16, and
from Microsoft. Disc (CD) standard. Therefore, these discs FAT32 in USB device.
may not be compatible with this product.  The system can recognize the following files
ABOUT MPEG-4 VISUAL: THIS PRODUCT or folders in DATA DVD, DATA CD and
IS LICENSED UNDER THE MPEG-4 USB device:
VISUAL PATENT PORTFOLIO LICENSE  up to 300 folders
FOR THE PERSONAL AND  up to 648 files

5 6 7 8

Connecting the Speakers Connecting your TV *1 Supplied only in certain areas. This is the When Installing the 2 Fasten the screws to the wall, then
basic connection via video cord (yellow). hang the speaker on the wall.
Caution Depending on the jacks on your TV or set-top box, select the video and audio connection method. *2 Supplied only in certain areas. Picture Speakers on a Wall
Do not use any speakers other than those supplied with this system. quality will be improved compared to a Caution Depth of fastened screw
Insert the speaker cords to match the color of the SPEAKERS terminals of the unit. When connecting to a TV only When connecting a TV and set-top box/PlayStation®3 video cord.
The TV has AUDIO OUT jacks*4: The TV has AUDIO OUT jacks: The TV does not have AUDIO OUT jacks:  Contact a screw shop or installer for
*3 Sold separately. To listen to TV audio via information regarding the wall material or
the system, connect with an audio cord screws to be used.
Rear panel of the main unit Audio
Video (red and white).
 Use screws that are suitable for the wall 7 to 9 mm
Speaker cord Set-top box/ Set-top box/ * If your TV does not have AUDIO OUT
4
material and strength. As a plaster board
Contact area (+) PS3™ PS3™ jacks, TV sound does not output via this (9/32 to 3/8 inch)
Video wall is especially fragile, attach the screws
system. securely to a beam. Install the speakers on a
Covering
vertical and flat wall where reinforcement is
Colored tube Video Audio Video Audio Video Audio Connecting the FM wire antenna applied.
(aerial)  Sony is not responsible for accidents or
damage caused by improper installation,
insufficient wall strength or improper screw
Contact area (–) Connecting a video cord and an audio cord installation, natural calamity, etc.
Blue Select *1 or *2 for the video connection based on the jacks on the TV.
Colored tube 1 Prepare screws (not supplied) that are
Gray Green FRONT LEFT: White suitable for the hole on the back of
Audio  Video 
White Purple FRONT RIGHT: Red each speaker. See the illustrations
Red CENTER: Green FM
below.
US E 8Ω NNA

IM PEDA
NCE SURROUND LEFT: Blue ANTE
4 mm (3/16 inch)
SURROUND RIGHT: Gray
SUBWOOFER: Purple 30 mm (1 3/16 inches)
ER FER
CENT SUBWOO

Note
OUND
SURR LEFT VIDEO IN HDMI IN AUDIO OUT VIDEO IN HDMI IN AUDIO OUT VIDEO IN HDMI IN AUDIO OUT
KERS
T
ONT FT RIGH
L R L R L R
SPEA Hole on the back of the speaker
FR LE

 Connect the speaker cord with the colored Note

T
RIGH

tube to +.  Find a location and an orientation that

provide good reception, and then set up the 5 mm
antenna. (7/32 inch)
SUBWOOFER
CENTER FRONT R  Set up the antenna away from the AC power
cord (mains lead), other cables, and metal 10 mm
FRONT L *1 *2 *3 *1 *2 *3 *1 *2 *3 (13/32 inch)
objects such as windows.
Main unit

SUR R

SUR L

9 10 11 12

Color System Setup Parts and Controls

1 Connect the AC power cord (mains BRAVIA Sync DVD MENU
lead). Front panel Remote control
ONE-TOUCH PLAY Opens or closes the DVD’s menu.
2 Turn on the power of the main unit   
Activates One-Touch Play. MUTING
and TV. TV I/ (on/standby)* Turns off the sound temporarily.
Turns on the TV or sets it to standby mode. ///
/ (on/standby) Moves the highlight to a displayed item.
/ Turns on the system or sets it to standby (ENTER)
mode. Enters the selected item.
Function selection buttons VOLUME +/–
/ Select the playback source. Adjusts the volume.
    DVD/CD SETUP
3 Press FUNCTION repeatedly or DVD/ FM Opens or closes the setup menu.
CD to switch the function to DVD/CD.  / (on/standby) FUNCTION USB DISPLAY
Turns on the unit, or sets it to standby Selects the playback source. TV/CABLE Opens or closes the Display Menu.
Playback starts automatically if a disc
with an auto playback function is loaded. mode.  VOLUME –/+ FUNCTION TIME
Press  twice to stop playback.  Play operation buttons Adjusts the system’s volume. Selects the functions in sequence. Switches time information during playback.
REPEAT Playback operation buttons
4 Switch the input selector on your TV  (open/close)  (USB) port
Activates repeat/shuffle playback mode.
Opens or closes the disc tray. Used for connecting a USB device. / (previous/next)
to display “Home Theatre System.” SURROUND
 (play) / (fast reverse/fast forward)
5 Press SETUP in stop mode. Starts or re-starts playback (resume play).
 Disc tray Selects surround audio output mode. / (slow)
The Setup Menu appears.  (stop)  Front panel display EQ Activates slow reverse/slow forward when
6 Selects equalizer mode. / is pressed in pause mode.
Press / repeatedly to select Stops playback and remembers the stop  (remote sensor) AUDIO
[Preference Page], then press . point (resume point).  (pause)
The resume point for a title/track is the Selects the audio format/track and FM mode.  (play)
7 Press / repeatedly to select [TV SUBTITLE
last point you played.  (stop)
Type], then press . Selects the subtitle language when Radio operation buttons
8 Press / repeatedly to select [PAL] multilingual subtitles are available. PRESET +/–
or [NTSC] from the displayed list, then ANGLE TUNING +/–
press . Rear panel Switches to other viewing angles when multi-
9 Press SETUP to turn off the Setup angles are recorded on a DVD VIDEO. * Works with Sony TVs only. Depending on
Menu. Number buttons your TV, you may not be able to use some
Enter the title/chapter numbers, preset radio of the buttons.
Note
SHIFT stations, etc. Note
 The display on the TV screen may be PROGRAM
interrupted momentarily after changing the Press and hold this button to use buttons with AUDIO IN
purple text labels. Activates program play and presets radio This button does not work.
color system as described above.
TV INPUT* stations.
     Switches the TV’s input source between the SLEEP
TV signal and other input sources. Sets the sleep timer.
 SPEAKERS terminals  TV/CABLE (AUDIO IN) jacks DVD TOP MENU
 HDMI OUT jack  FM ANTENNA jack Opens the DVD’s Top Menu.
 VIDEO OUT jack
13 14 15 16
Continued 
Playing a Disc Playing Files on a Disc/USB Other Playback Operations To search for a title/chapter/ To play repeatedly/shuffle, etc. Selecting the Sound Effect Using a Tuner
1 Press DVD/CD. Device track/scene, etc. Press REPEAT repeatedly to select the
You can also select this function by
To change angles  When playing a DVD/VCD
desired playback mode. The selected mode To select an equalizer setting To preset radio stations
1 Press DVD/CD or USB.
Press ANGLE during playback to select the appears in the front panel display. Press EQ to display the current mode. While You can preset 20 FM stations. You can then
pressing FUNCTION repeatedly. 1 Press DISPLAY during play.
 DVD/CD: For a disc. desired angle. (This applies to DVD VIDEOs  “REP CHP”: Repeats the current chapter. the current mode is displayed, press EQ tune in any of those stations simply by
2 Press  to open the disc tray.  USB: For a USB device. only.)
The Display Menu appears on the TV  “REP TT”: Repeats the current title. repeatedly until the desired mode appears on selecting the corresponding preset number.
3 Place a disc on the tray, then press . You can also select the function by screen.  “REP ALL”: Repeats all titles. the front panel display. 1 Press FM.
pressing FUNCTION repeatedly. To display subtitles 2 Press / to select an option, then  “REP TRK”: Repeats the current track.  “AUTO”: Automatically selects the movie
2 Load the source. Press SUBTITLE during playback to select press .  “REP OFF”: The system returns to normal or music sound mode based on the disc 2 Press and hold TUNING +/– for 2
 For a disc playback mode. seconds to start tuning until you find
the desired subtitle language. (This applies to 3 Press and hold SHIFT, then press the type.
Place a disc on the tray by pressing  to  “SHUFFLE”: Plays the contents once in the desired radio station.
DVD VIDEOs only.) number buttons to jump to the  “MOVIE”: Enjoyable, powerful bass and
open/close the disc tray. random order until all the contents have sound effects; recommended for movies. “SEARCH +” or “SEARCH –” appears in
desired option.
 For a USB device been played. the front panel display until a radio
To change the sound  When playing a CD  “MUSIC”: Well-balanced low and high
Connect a USB device to the (USB)  “SHUF REP”: Repeats shuffle play. range; recommended for music. station with sufficient signal strength is
port. Press AUDIO repeatedly during playback 1 Press DISPLAY during play.  “FOLDER”: Plays the current folder.  “TV”: Clear, mid-range vocals;
found.
to select the desired audio signal. The selection display appears on the TV  “RANDOM”: Plays all files in random recommended for watching dramas or 3 Press and hold SHIFT, then press
 When the system is playing a DVD screen. order. comedies. PROGRAM.
With the label side up.
VIDEO recorded in multiple audio 2 Press and hold SHIFT, then press the  “SINGLE”: Plays the current file.  “GAME”: Enhanced low and high range; “P 01” flashes in the front panel display.
4 Press  to start playback. formats (PCM, Dolby Digital, or MPEG number buttons to select the desired  “REP ONE”: Repeats the current file. recommended for action or shooting
audio), you can change the audio format. If  “REP FLD”: Repeats the current folder.
4 Press and hold SHIFT, then press the
5 Press VOLUME +/– to adjust the track. games, etc. number buttons to select a preset
the DVD VIDEO is recorded with Note
volume.  When playing a video/music/photo file number.
multilingual tracks, you can also change  The selectable modes and their order differ To select a surround setting
USB device the language. 1 Press DISPLAY during play. depending on the disc or file. 5 Press to store the station
The selection display appears on the TV Press SURROUND to display the current
 With a VIDEO CD or CD, you can select frequency.
screen. mode. While the current mode is displayed,
the sound from the right or left channel
3 Press / to select a folder, then press SURROUND repeatedly to select the To select a preset radio station
and listen to the sound of the selected 2 Press and hold SHIFT, then press the desired surround audio output mode. The
press and select a file. channel through both the right and left number buttons to select the desired selected mode appears in the front panel 1 Press FM.
4 Press  to start playback. speakers. number. display. 2 Press PRESET +/– to select a preset
5 Press VOLUME +/– to adjust the
To play a VIDEO CD with PBC  “MULTI” (A.F.D. MULTI): When the number.
volume. To play in programmed order source is 2 channel, sound is output from
functions You can also select a preset number by
Note Select the tracks to play in the order you want all speakers. pressing and holding SHIFT, then
 Do not remove the USB device during When you start playing a VIDEO CD with (only for CDs).  “STANDARD” (A.F.D. STANDARD): The pressing the number buttons.
operation. To avoid data corruption or PBC (Playback control) functions, the menu 1 Press and hold SHIFT, then press system discriminates the sound format of
damage to the USB device, turn the system for your selection appears. PROGRAM. the source and presents sound as it was If an FM program is noisy, you can select
off when connecting or removing the USB To play without using PBC The Program Menu display appears on recorded/encoded. monaural reception. There will be no stereo
device. In stop mode, press and hold SHIFT, then the TV screen.  “DOLBY PL” (PRO LOGIC): Performs effect, but reception will improve.
press the number buttons to select the track Dolby Pro Logic decoding.
2 Press and hold SHIFT, then press the Press AUDIO.
number you want.  “2CH ST” (2CH STEREO): All formats are
number buttons to select the desired “STEREO”: Stereo reception.
downmixed to 2 channels.
track. “MONO”: Monaural reception.
Note
3 Press /// to select [Start] to play
 Depending on the playback stream, the
the program. surround settings may not be effective.

17 18 19 20

Convenient Functions To cancel the sleep timer function Using the Setup Display [4:3 Letter Box]: Displays a wide picture with  [Screen Saver] [SR]: Adjusts the sound level of right Video Setup Page 1 Press / to select a rating level from
Press and hold SHIFT, then press SLEEP black bands on the top and bottom. [On]: The screen saver image appears if you surround speaker. It is possible to adjust the 1 to 8 or [Off], then press .
repeatedly until “OFF” appears in the front You can make various adjustments to items parameter from -6.0 dB to +6.0 dB.  [HDMI Resolution]
About the Control for HDMI panel display. such as picture and sound.
do not operate the system for about 15
[SL]: Adjusts the sound level of left surround You can select the type of video signal that is
2 Press and hold SHIFT, then press the
minutes. number buttons to enter your 6-digit
function (“BRAVIA” Sync) Displayed items vary depending on the
[Off]: Off. speaker. It is possible to adjust the parameter output from the HDMI OUT jack.
To view information about the country model. password.
You can control a TV compatible with the from -6.0 dB to +6.0 dB. [Auto]: The system outputs the optimal video
The default setting is underlined.  [Last Memory]  [Default]
Control for HDMI function by connecting it disc [SW]: Adjusts the sound level of subwoofer. It signal for the connected TV.
This system recalls the point where you
to the system via an HDMI cable. You can check the playing time and 1 Press DVD/CD, then eject the disc. [4:3 Pan Scan]: Displays a full-height picture is possible to adjust the parameter from -6.0 [480p/576p]: The system outputs 720 × 480p* This feature enables you to reset all the setup
stopped the disc the last time it was played dB to +6.0 dB. or 720 × 576p* video signals. menu options and your personal settings to
Available features remaining time of the current title, chapter, 2 Press SETUP. on the entire screen, with trimmed sides.
and resumes playback from that point the [720p]: The system outputs 1280 × 720p* the factory defaults, except for your password
 One-Touch Play or track. The setup menu appears. next time you insert the same disc.  [Distance]
video signals. for the [Password] and [Parental] items.
With one touch of ONE-TOUCH PLAY on Press and hold SHIFT, then press TIME 3 Press / to select one of the setup [On]: The system stores the resume points in If you move one of the speakers, be sure to
[1080i]: The system outputs 1920 × 1080i* Press to confirm the default reset.
the remote control, the system and your repeatedly. menu categories, then press . memory. set the parameters of the distance from the
listening position to speakers. video signals.
TV automatically turn on and the TV’s Each time you press and hold SHIFT, then [Off]: The system does not store the resume Password Setup Page
input is switched to the system; playback of press TIME while playing the disc, the 4 Press / to select a setup item, then [L/R]: Adjusts the distance of the left/right [1080p]: The system outputs 1920 × 1080p*
points in memory. Playback restarts at the video signals.
a disc starts automatically. displayed item changes depending on the press  or . speakers. It is possible to adjust the parameter  [Password]
 [OSD Lang] (On-Screen Display) resume point only for the current disc in the * i: interlace, p: progressive
 System Power Off disc. 5 Select the option you wish to change You can switch the display language on the unit. from 1.0 m to 7.0 m (3 to 23 ft). The default password is “000000.” To change
When you turn the TV off by using the / and press to confirm and go back TV screen. [C]: Adjusts the distance of the center the password:
Note Preference Page
button on the TV’s remote control or TV to the previously selected item. speaker. This parameter can be set between
 [Control for HDMI]  When the resume playback memory is full, 1 Press and hold SHIFT, then press the
/ on the system’s remote control, the 6 Press SETUP to turn off the menu. 1.6 m (5 ft) shorter and equal to the L/R  [TV Type]
This function is available when you connect the resume playback point for the earliest number buttons to enter “000000” or
system turns off automatically. Selected category Setup categories channel setting. The TV type default setting varies depending
the system and a TV that is compatible with disc is deleted. your last set 6-digit password in the
 System Audio Control [SL/SR]: Adjusts the distance of the left/right on the area.
the Control for HDMI function via an HDMI [Old Password] section.
You can switch the audio output to either  [Auto Standby] surround speaker. This parameter can be set [PAL]: For a PAL-system TV.
the TV speakers or this system’s speakers cable. [On]: Enters standby mode automatically between 5.0 m (16 ft) shorter and equal to [NTSC]: For an NTSC-system TV.
2 Press and hold SHIFT, then press the
-- General Setup Page -- [On]: You can operate mutually between when in stop, pause, no disc, or eject mode number buttons to enter a new 6-
via the TV’s menu. TV Display 16:9 16:9 the L/R channel setting.
components that are connected via an HDMI for more than 30 minutes.  [Audio] digit password in the [New Password]
OSD Lang ENG 4:3 Letter Box
cable.  [Center Speaker] You can select the preferred audio language section.
Sleep timer Control for HDMI On 4:3 Pan Scan [Off]: The unit does not enter standby mode
[On]: Activates the center speaker.
[Off]: Off. for DVDs with multiple sound tracks.
automatically. 3
HDMI Audio Off
You can set the system to turn off at a preset Screen Saver On [Off]: Deactivates the center speaker. Press and hold SHIFT, then press the
time, so you can fall asleep listening to music. Last Memory On  [HDMI Audio]  [Subtitle] number buttons to enter the new 6-
Auto Standby On This setting is only required if you are using Speaker Setup Page  [Sur. Speaker] You can switch the language of the subtitles digit password again in the [Confirm
Press and hold SHIFT, then press SLEEP. [On]: Activates the surround speakers.
the HDMI OUT jack for an audio recorded on a DVD VIDEO. PWD] section to confirm your entry.
Each time you press this button, the minute  [Level] [Off]: Deactivates the surround speakers.
display (the remaining time) changes by 10 connection. You can adjust the sound level of all the  [Disc Menu] 4 Press [OK] to exit the menu.
Selected setting Options [Off]: Turns off HDMI audio output. You can
minutes. speakers and the subwoofer.  [Test Tone] You can switch the language for a disc’s
A countdown of the last 20 seconds until the still enjoy sound output via the speaker [L]: Adjusts the sound level of left speaker. It The speakers will emit a test tone to set the menu.
General Setup Page system. is possible to adjust the parameter from -6.0 Level.
unit turns off appears in the front panel  [Parental]
display. [All]: The HDMI audio output format will be dB to +0.0 dB. [On]: The speakers emit the test tone.
 [TV Display] You can restrict playback of DVDs that have
same as the audio stream being played. If the [C]: Adjusts the sound level of center speaker. [Off]: The speakers do not emit the test tone.
To check the remaining time [16:9]: Select this when you connect a wide- ratings. Scenes may be blocked or replaced
playback audio format is not supported, the It is possible to adjust the parameter from Tip
Press and hold SHIFT and SLEEP for 3 screen TV or a TV with a wide mode with different scenes.
audio output will be changed to PCM -6.0 dB to +6.0 dB.  To adjust the volume of all speakers, press
seconds. The remaining time until the unit function.
automatically. [R]: Adjusts the sound level of right speaker. VOLUME +/– on the unit or on the remote
turns off appears in the front panel display. [PCM]: HDMI audio output will be It is possible to adjust the parameter from control.
downmixed to linear PCM (2-channel). -6.0 dB to +0.0 dB.  Press /// repeatedly to select the
speaker and the desired level or distance.

21 22 23 24

Precautions On cleaning discs, disc/lens cleaners This system can only play back a standard Troubleshooting Picture Operation A JPEG image file cannot be played. USB device
 Do not use cleaning discs or disc/lens circular disc. Using neither standard nor  It is larger than 2,048 (width) × 1,536
On placement cleaners (including wet or spray types). circular discs (e.g., card, heart, or star shape) If you experience any of the following There is no picture. “PROTECT” appears in the front panel (height) in normal mode, or more than “OVERLOAD“ appears in the front panel
These may cause the apparatus to may cause a malfunction. difficulties while using the system, use this  The video connecting cords are not display. 2,000,000 pixels in progressive format display.
 At high volume, over long periods of time,
the cabinet becomes hot to the touch. This malfunction. Do not use a disc that has a commercially troubleshooting guide to help remedy the connected securely.  Connect all channels to their which is mainly used on Internet Web  Remove the USB device from the
is not a malfunction. However, touching available accessory attached, such as a label problem before requesting repairs. Should  The unit is not connected to the correct corresponding SPEAKERS terminals sites.  (USB) port. Make sure there is no
On your TV’s color any problem persist, consult your nearest
the cabinet should be avoided. Do not place or ring. TV input jack. correctly. A video file cannot be played. problem with the USB device.
the system in a confined space where IMPORTANT NOTICE Sony dealer.  The system is not selected via the video  Press / to turn off the system, and
On heat radiation  The video file resolution is larger than The USB device (audio file/JPEG image
ventilation is poor as this may cause Caution: This system is capable of holding Note that if service personnel changes some input of the TV. check the following items after
Due to the slim type of main unit design, you 720 (width) × 576 (height). file) cannot be played.
overheating. a still video image or on-screen display parts during repair, these parts may be  Check the output method on your system. “STANDBY” disappears:
image on your television screen
may feel some heat on the top of the unit.
retained. The name of a folder or file is not  Files that are encrypted or protected by
 Do not install the system near heat sources This is normal. Please consult your nearest Even though you set the aspect ratio in  Are the + and – speaker cords short- passwords, etc., cannot be played.
such as radiators or air ducts, or in a place indefinitely. If you leave the still video circuited? displayed correctly.
Sony dealer if you have any questions. Power [TV Display] of [General Setup Page], the  There is no playable file in the USB
subject to direct sunlight, excessive dust, image or on-screen display image  Is anything blocking the ventilation  The system can only display numbers and
picture does not fill the TV screen. letters of the alphabet. Other characters device.
mechanical vibration, or shock. displayed on your TV for an extended holes of the system?
The power is not turned on.  The aspect ratio on the disc is fixed.
period of time you risk permanent are displayed as [_].
 Do not install the system in an inclined  Check that the AC power cord (mains  After checking the above items and fixing
damage to your television screen. Color irregularity occurs on the TV any problems, turn on the system. A disc does not start playing from the
position. It is designed to be operated in a lead) is connected securely.
Projection televisions are especially screen. If the cause of the problem cannot be beginning.
horizontal position only.
susceptible to this. The system’s speakers contain magnet found even after checking all the above
 Do not place heavy objects on the system. Sound parts, so magnetic distortion may occur.
 Resume Play has been selected.
On operation
items, consult your nearest Sony dealer. During stop, press  and then start
On moving the system The sound doesn’t output from the When color irregularity occurs on the TV playback.
 If the system is brought directly from a cold Before moving the system, make sure that screen, check the following items. A disc cannot be ejected and “LOCKED”
surround speakers.  Program play has been selected. During
to a warm location, or is placed in a very there is no disc inserted, and remove the AC appears in the front panel display.
 Press SURROUND repeatedly and select  Install the speakers at least 0.3 meters (1.0 stop, press  and then start playback.
damp room, moisture may condense on the power cord (mains lead) from the wall outlet “MULTI” (A.F.D. MULTI) to output ft) from your TV set.  Contact your Sony dealer or local
lenses inside the unit. Should this occur, authorized Sony service facility.  Shuffle play has been selected. During
(mains). sound from all speakers.  If the color irregularity persists, turn off stop, press  and then start playback.
the system may not operate properly. In (Depending on the media, sound may the TV set once, then turn it on after 15 Radio stations cannot be tuned in.
On handling discs The system does not work normally.
this case, remove the disc and leave the not be output from the surround to 30 minutes.  Check that the antenna (aerial) is
system turned on for about half an hour  To keep the disc clean, handle the disc by  Disconnect the AC power cord (mains
its edge. Do not touch the surface. speakers.)  Reposition the speakers farther away connected securely. Adjust the antenna
until the moisture evaporates. from your TV set. (aerial) or connect an external antenna lead) from the wall outlet (mains), then
 Do not stick paper or tape on the disc. The [Speaker Setup Page] items cannot reconnect after several minutes.
 If anything falls into the cabinet, unplug (aerial) if necessary.
the unit and have it checked by qualified  Do not expose the disc to direct sunlight or be changed. The [TV Type] setting does not match
heat sources such as hot air ducts, or leave your TV. A disc does not play. The Control for HDMI function does not
personnel before operating it any further.  Press DVD/CD, then eject the disc.
it in a car parked in direct sunlight as the [TV Type] can be reset according to the work.
There is no sound. Severe hum or noise is  The region code on the DVD does not
On cleaning temperature may rise considerably inside following procedure: match the system.  Set the [Control for HDMI] setting in
heard. [General Setup Page] to [On].
 Clean the cabinet, panel, and controls with the car.  ress  to take out the disc.
1. P  Moisture has condensed inside the unit
a soft cloth slightly moistened with a mild  Remove the speaker cords from the  Make sure that the connected component
On cleaning discs 2. Press DISPLAY. and may cause damage to the lenses.
detergent solution. Do not use any type of SPEAKERS terminals, straighten and is compatible with the Control for HDMI
3. Press . Remove the disc and leave the unit turned
abrasive pad, scouring powder, or solvent  Before playing, clean the disc with a extend the contact area of each speaker function.
cleaning cloth. [TV Type] will be reset. on for about half an hour.
such as alcohol or benzine. cord, then reconnect the speaker cords to  Check the connected component’s setting
Wipe the disc from the center out. the SPEAKERS terminals. A DATA CD/DATA DVD cannot be played. for the Control for HDMI function. Refer
If you have any questions or problems
concerning your system, please consult  Do not use solvents such as benzine,  Clean the disc.  The DATA CD is not recorded in ISO to the operating instructions supplied
thinner, commercially available cleaners, or 9660 Level 1/Level 2, or Joliet. with the component.
your nearest Sony dealer. The sound loses stereo effect when you
anti-static spray intended for vinyl LPs.  The DATA DVD is not recorded in UDF
play a VIDEO CD or CD.
(Universal Disk Format).
 Set the audio setting to [Stereo] by
pressing AUDIO.

25 26 27 28

Specifications CD/DVD System Center Dimensions (approx.) 340 mm × 56 mm ×

Laser Diode Properties SS-CT121 325 mm (13 1/2 in ×
AUDIO POWER SPECIFICATIONS Emission Duration: Dimensions (approx.) 83 mm × 119 mm × 2 1/4 in × 12 7/8 in)
for the U.S. models Continuous 100 mm (3 3/8 in × (w/h/d) incl. projecting
POWER OUTPUT AND TOTAL Laser Output*: Less 4 3/4 in × 4 in) (w/h/d) parts
HARMONIC DISTORTION: than 44.6 μW incl. projecting parts Mass (approx.) 2.1 kg (4 lb 11 oz)
(FTC) * This output is the value measurement at a Mass (approx.) 0.43 kg (16 oz)
Front L + Front R With 8 ohms loads, distance of 200 mm from the objective lens Design and specifications are subject to
Surround
both channels driven, surface on the Optical Pick-up Block with change without notice.
from 180 - 20,000 Hz; 7 mm aperture. SS-TS121
rated 30 watts per Dimensions (approx.) 83 mm × 119 mm ×
USB Section
channel minimum 100 mm (3 3/8 in ×
(USB) port:
RMS power, with no 4 3/4 in × 4 in) (w/h/d)
Maximum current: 500 mA
more than 1% total incl. projecting parts
harmonic distortion Tuner Section Mass (approx.) 0.39 kg (14 oz)
from 250 milli watts to System PLL quartz-locked Subwoofer
rated output. digital synthesizer
Tuning range SS-WS121
Amplifier Section North American and Brazilian models: Dimensions (approx.) 160 mm × 315 mm ×
POWER OUTPUT (rated): 87.5 MHz - 108.0 MHz 295 mm (6 3/8 in ×
Front L + Front R 30 W + 30 W (at (100 kHz step) 12 1/2 in × 11 5/8 in)
8 ohms, 1 kHz, 1% Other models: 87.5 MHz - 108.0 MHz (w/h/d) incl. projecting
THD) (50 kHz step) parts
POWER OUTPUT (reference): Antenna FM lead antenna Mass (approx.) 3.0 kg (6 lb 10 oz)
Front L/Front R/ General
Center/Surround L/ Video Section
Outputs VIDEO: Pin jack Power requirements
Surround R: 50 W (per North American and Mexican models:
channel at 8 ohms, HDMI OUT: HDMI
19-pin 120 V AC, 60 Hz
1 kHz) Subwoofer: Latin American models:
50 W (at 8 ohms, Speakers 110 V - 240 V AC,
100 Hz) Front 50/60 Hz
Inputs SS-TS121 Other models: 220 V - 240 V AC,
TV/CABLE : Pin jack Dimensions (approx.) 83 mm × 119 mm × 50/60 Hz
100 mm (3 3/8 in × Power consumption
4 3/4 in × 4 in) (w/h/d) North American and Mexican models:
incl. projecting parts On: 29 W
Mass (approx.) 0.35 kg (13 oz) Standby: 0.4 W*
Other models: On: 34 W
Standby: 0.5 W*

* Valid when the system is in the following

status:
 [Control for HDMI] is set to [Off].

29 30 31 32