Tower to Rack-Mount Conversion Guide
Smart-UPS™On-Line SRTRK2
Package Contents
Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.
All Models SRT5K, 3U models and external battery packs
One Rail Kit with instructions and hardware for
installing rails in a rack. x2
x8
su0434a
x4
Rail cleats
x8
SRT8K/SRT10K, 6U models SRT6K, 4U models
x4 x2
x8 x8
x4 x4
x2
x8
x4
Tower to Rack-Mount Conversion
Actual models may differ in appearance from those depicted in these graphics. Installation process is identical for all
models.
CAUTION
DAMAGE TO EQUIPMENT OR PERSONNEL
• The equipment is heavy. Each battery module weighs 17 kg (37 lb).
• Always practice safe lifting techniques adequate for the weight of the equipment.
• Remove the battery modules before installing the UPS.
• Use the battery module handle to carefully slide the battery module in or out of the unit.
• Do not use the battery module handle to lift or carry the battery module.
Failure to follow these instructions can result in equipment damage and minor or moderate injury.
SRT5K/SRT6K UPS and SRT5KTFJ model
su08
52b
su 08
51b
su08 su08
49b 48b
su 08
45 b
su08
46b
2 Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion
Install the SRT5K/SRT6K and SRT5KTFJ model in a rack
Refer to the rail kit Installation Guide for instructions on rail installation.
su 08
53b
40 a
su 09
54a
su08
55 b
su 08
a
su0857
56 a
su 08
58 b
su 08 59a
su08
Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion 3
SRT5K/SRT6K UPS with one external battery pack
98b
00b
s u08
s u0 9
97b
s u08
XLBP
UPS
94b
s u08
su0893b
2b
su089
4 Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion
Install the SRT5K/SRT6K with one external battery pack in a rack
The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identicalal to that
described for the SRT5K/SRT6K models.
Refer to the rail kit Installation Guide for instructions on rail installation.
su09
1 9b
801a
s uo 0
leat
rail c
04a
s u0 9
05b
s u0 9
06a
s u0 9
07a
s u 09
Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion 5
x4
09a
s u 09
su 0 908a
UPS
XL BP
1a
su091
SRT8K/SRT10K UPS
s uo0 s uo0
7 84c 7 85b
6 Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion
x4
s uo0
7 81b
suo0
7 83a
s uo0
7 82b
Install SRT8K/SRT10K UPS in a rack
Refer to the rail kit Installation Guide for instructions on rail installation.
suo07
73b
x8
x3 x3
x8
suo0788a
leat
rail c
suo0774a
Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion 7
x4
suo0775a
suo0776a
x4
suo0777a
suo0778a
suo0779a
x4
The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that
described for the SRT5K/SRT6K models.
Refer to the installation process described in the section, Install the SRT5K/SRT6K with one external battery pack.
Customer support and warranty information is available at the APC by Schneider Electric web site,
www.apc.com.
© 2015 APC by Schneider Electric. APC, the APC logo, Smart-UPS and PowerChute are owned by EN 990-5288A
Schneider Electric Industries S.A.S. or their affiliated companies. All other trademarks are property of
10/2015
their respective owners.
