DIFFERENT SHOES MATERIALS AND THEIR FEATURES

1. WATERPROOF SUEDE MICROFIBER FOR SAFETY SHOES & BOOTS:

Thickness: 1.8mm, 2.0mm.

Width: 1.37m.

Colour : Black, Grey, Brown, Camel, Blue or customized.

Features : waterproof suede usually used for special purpose safety

shoes and boots.

2. BARTON PRINT MICROFIBRE LEATHER FOR SAFETY SHOES & BOOTS:

1. Excellent tear strength and tensile strength, even better than genuine
leather.

2. Excellent chemical resistant properties.

3. Light weight, make your shoes more comfortable.

4. High usage ratio, can up to 100%.

5. No defects, high-efficiency production.

6. Cost-effective, make your shoes more competitive.

7. Eco-friendly. No heavy metal, AZO free.

3. MICROFIBER LEATHER –FAUX LEATHER FOR SHOES:
1.  Performance is better than the genuine leather and the surface effect can be
achieved in line with the genuine leather;
2. Tear resistance, abrasion resistance, tensile strength and so on are all
beyond real leather, and cold-resistant, acid proof, alkali-resisting, non-
fading; Light weight, soft, good breathability, smooth and good feeling, and
tidy and free from wear facets;
4. Antibacterial, anti-mildew, mothproof, without any harmful substances,
very environmental, is the Green Products in the 21st century.
5. Easy to cut, high utilization rate, easy to clean, no odours. Eco-friendly and
Cost-efficient.

4. PU MICROFIBER LEATHER :

1. Very good hand feel and comfortable touch, same as genuine leather.

2. Lighter weight than genuine leather, usually 500gsm~600gsm.

3. Very durable, tensile strength, break strength, tear strength, peeling

strength, abrasion resistance, hydrolysis resistance all beyond genuine
leather. Easy clean. Up to 100% usage rate.

4. Eco-friendly.
5. SYNTHETIC SUEDE MATERIAL FOR SHOES LINING –MICROFIBER SYNTHETIC SUEDE LEATHER:

Composition: Nylon (Polyamide) + PU (Polyurethane).

Thickness: 0.5mm – 1.2mm.

Width: 1.37m-1.43m.

Colours: Black, White, Beige, Tan, Grey, Camel, and

customized.

Features : easy to modify and use.

6. CREASE-FREE MICROFIBER LEATHER FOR SHOES UPPER :

Thickness: 1.0mm – 2.2mm.

Width: 1.37m.

Colour: all colours available.

Style:  full grain, crazy horse, wipe focal, oil wax, etc.

Features : Light weight, soft, good breathability, smooth and good

feeling, and tidy and free from wear facets.
Environment friendly and cost effective.
7. BURNISH MICROFIBER PU LEATHER FOR LEATHER SHOES:

Thickness: 1.0mm – 1.4mm.

Width: 1.37m.

Features :
1. Tear resistance, abrasion resistance, tensile strength and so on are all
beyond real leather, and cold-resistant, acid proof, alkali-resisting, non-
fading;
2. Light weight, soft, good breathability, smooth and good feeling, and
tidy and free from wear facets;
3. Antibacterial, anti-mildew, mothproof, very environmental.

8. FAUX NUBUCK FABRIC :

Material: polyamide (pa or nylon) and PU (polyurethane).

Thickness: 0.8mm – 2.0mm.
Width: 137cm .
Colour:  black,  grey, red, customized available.

SUEDE VS NUBUCK : Nubuck is sanded on the outside surface of

the leather, while suede is sanded on the inner surface.
9. MICRO FIBER SUEDE LEATHER MATERIAL FOR SHOES :

Thickness: 0.5mm – 2.2mm.

Width: 1.37m

Colour: Black, White, Grey, Beige, Camel, as customized.

Features : Best quality faux suede leather fabric material

for shoes, looks and feel same as suede leather, good
breathability, high strength, superior durable.

10. HIGH QUALITY FAUX SUEDE FABRIC FOR BOOTS & SHOES :

1. Very comfortable luxurious feel and looks. Excellent colour

fastness, colour is more bright and lasting than leather.

2. Superior resistance to crocking, pilling, fraying, stretching and

shrinking. Breathable, Odourless, mildew proof, hydrolysis
1. Same looks and same hand feel and comfortable touch as
resistant, resistance to acid and alkali.
patent leather.
3. Compared with natural suede, more lighter and thinner, uniform
2. Lighter weight than patent leather. Superior durable, tensile
thickness, easy cutting.
strength, break strength, tear strength, peeling strength, abrasion
resistance, hydrolysis resistance all beyond patent leather.

3. High usage ratio.

4. Cost effective & Eco-friendly.

11. MICROFIBER PATENT LEATHER FOR LEATHER SHOES :

12. MICROFIBER SYNTHETIC LEATHER:

1. Light weight, soft, good breathability, smooth and good feeling,

and tidy and free from wear facets;
2. Antibacterial, anti-mildew, mothproof, without any harmful
substances, very environmental, is the Green Products in the 21st
century.
3. Easy to cut, high utilization rate, easy to clean, no 

USED FOR : shoes, bags, Leather belt, purse, and other leather
products. Clothing leather, garment leather. Furniture upholstery.
13. BREATHABLE IMITATION PIGSKIN INSOLE LINING :
Automotive leather.
 Thickness: 0.5mm, 0.6mm, 0.7mm.
Width: 1.37m.
Colour: beige, black, brown, khaki, customized.
1. Excellent abrasion resistance.
2. Breathable.
3. Good tear strength.

14. BEST QUALITY MICROFIBER PU PIG SKIN LINING

LEATHER :

Thickness: 0.6mm – 0.8mm.

Width: 1.37m.
Colours: all colours available.
1. Comfortable soft feeling as natural pigskin leather lining.
2. High tear and tensile strength.
3. Superior wear resistance.
4. High usage rate, easy cut.
5. Eco-friendly, compliance to EU REACH SHVC
regulations.
15.  SYNTHETIC LEATHER MATERIAL FOR SHOE LINING :

Composition: nylon + PU.

Thickness: 0.5mm – 1.2mm.
Width: 1.37m.
Colour: all colours available.

16. BREATHABLE AND ABSORBENT MICROFIBER MATERIAL FOR SHOES LINING :

Composition: Polyamide (Nylon) + PU (Polyurethane).

Thickness: 0.5mm – 0.8mm.
Width: 1.37m.
Colour: Black, White, Beige, Grey, Brown, Camel, all
colours available.
1. Very good breathability . Very good sweat absorbent.
2. Very good strength and abrasion resistance. Light weight
17. NON WOVEN NEEDLE
compared withPUNCHED FELT FOR
leather lining.
SHOES LINING :
 Materials: 100% polyester (recycled PET).
Production technology: non- woven needle punching.
Weight: 80gsm – 1000gsm.
Width: max 3m.
Colour: Black, White, Grey, or custom colours.

18. NON-WOVEN VAMP LINING FABRIC FOR SAFETY SHOES :

Material : 100 % Polyester

Used : for safety shoes
Thickness : 260-280gsm
Width : 150-152.4cm
Colour : grey colour
Features : Abrasion resistant.
 
19. PERFORATED MICROFIBER LEATHER SHOES LINING :

Composition: Nylon (polyamide) and PU (polyurethane).

Thickness: 0.6mm, 0.7mm, 0.8mm.
Colour: White, Black, Beige, Grey, Brown, all colours
available.
Width: 1.37m.
1. Very good breathability. Very good sweat absorbent.
2. Very good strength and abrasion resistance. Light weight
compared with leather lining.

20. NONWOVEN SHOE INNER LINING FABRIC :

Material : Nylon (polyamide/PA) non-woven

Used for : shoe lining fabrics, Polyester needle punched

non-woven shoe lining fabrics.
21. CAMBRELLA - NONWOVEN NYLON SHOE INSOLE LINING :

Material: 100% Polyamide.

Weight: 110 – 200gsm.

Embossing: Line “-“, Cross “+”, “T”, Herringbone, peanut shell.

Width: 145cm, 150cm, Max 60″.

Colour: black, white, yellow, beige, brown, blue, green, grey, all
colours available.

Features : Abrasion Resistant, Breathable , High quality

22. THERMOPLASTIC SHEET FOR SHOE TOE PUFF AND COUNTER STIFFENER :

Type: Medium Temperature, Low temperature, Super Low

temperature.
Texture: Nonwoven Chemical Sheet, Nonwoven Spun-laced,
Weaving Fabrics, PP Nonwoven Fabrics, Stitch Bond
Nonwoven Fabrics, etc.
Thickness: 0.6mm-2.5mm
23. POLYESTER 3D AIR MESH FABRIC FOR SPORTS SHOES

Material composition: 100% polyester

Weight: 352g/m² ±10g/m²

Thickness: 3.0mm ±0.3mm

Width: 140cm

Features : high breathability , moisture proof,

antibiosis, tear-resistant, anti-static , shrink-resistant.

24. EVA FOAM SHEETS FOR SHOES :

EVA sole sheet

Material composition : polyamide or polyester.

Used for : shoes inner sole, middle sole and

outsole production,
25. SPRINGBUCK
1. Thickness- 0.8- 1.0 mm
2. Fabric construction- 0.5 / 0.6 mm leather is composite with 0.3
mm stretch fabric for a final working thickness of 0.8 to 1.0 mm.
3. Springbuck is soft, stretchable nubuck leather that stretches up to
150% of its original size and returns back to its original condition
without loss of shape. The stretch can be repeated up to 200 times
without any structural changes.

26. TEXTILE

It is high quality cotton. It is highly breathable and dries

easily if it gets wet.
27. COW LEATHER 1. Cow leather is the most widely used leather and accounts for about 65 to
70% of world production. Cow leather is used for soles and uppers of shoes,
for carseats and furniture.upholstery, belts and straps, saddles, leather
clothing and much more. There is hardly any area in which bovine leathers
or calf skins are not processed.

2. In Brazil, there are 206 million cattle, which is the world's largest stock of
cattle. That is 14.2% of the world total (as of 2013)

28. TECBUCK

1. Tecbuck is the right material when exceptional

durability is required because it is extremely robust
and durable.
2. Example: Boots, Gum Boots, Ugs etc.
29. NEOPRENE

The robust elastomeric made of polychloroprene is of

particularly high quality and popular in a wide range
of applications in shoe industry.
30. FLEECE FOR LINING

Fleece is a light fabric which is very good at storing

heat due to its high volume. It is also resilient and
elastic. Fleece is very soft on the skin, is breathable
and has fast-drying properties.

31. PLUSH FOR WARM SHOES

1. This snug fabric is especially thick and

warming as well as hard-wearing and
elastic.
2. The warm fabric is extremely soft on the
skin, is breathable and has fast drying
properties.
32. LAMBSKIN

1. Lambskin wool can absorb up to 30% moisture

without the wearer feeling damp or cold.
2. The open, airy structure of lambskin enables
the circulation of air inside the shoe
automatically to be self-regulating.
3. As a result, the foot benefits from the comfort
of an ideal interior climate for feet.

33. CANVAS

1. Canvas is usually made of cotton or linen, along with polyvinyl

chloride (PVC), although historically it was made from hemp.

2. It differs from other heavy cotton fabrics, such as denim, in

being plain weave rather than twill weave. Canvas comes in two
basic types: plain and duck.
34. NATURAL RUBBER

1. Natural Rubber is an elastic substance obtained from the latex sap of trees,
especially those trees which belong to the genera Hevea and Ficus.
2. Technically speaking, natural rubber is an elastomer or an elastic hydrocarbon
polymer.
3. Viking Footwear has been making rubber boots for several decades and still
today, it is an intricate process.

4. Natural rubber can be moulded with various compounds to provide specific

characteristics. By the time a rubber boot reaches the stores it will have been
through more than 50 different operations. All our rubber boots are assembled by
35. PIG IRON hand.
1. Pig Iron is designed to fuse to polyester and poly-blend footwear,
creating an ultra lightweight leather and textile upper. Pig Iron delivers
to the factory as a complete package with application directions
included.
2. Specially treated leather with a micronic hot melt film layer that enables
designers go for a "NO SEW" construction.
3. Suitable for No Sew construction under laminating conditions of
120˚C/50 kg/30 sec.
4. Shoe finish procedures: Shoe is brushed off with a clean stiff dry bristle
brush.
36. POLYURETHANE SOLES

1. This material is both flexible and hardwearing, which is

important to withstand the punishment most kids dish out.
2. It can be moulded to create sole patterns that not only provide
great grip but can also feature images to appeal to kids.